load_vmstate() already use error_report, so be consistent. There is
an identical error message in load_vmstate() that ends in a
period. Remove it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We have just arrived as:
migration.c: qemu_migrate()
....
s = migrate_init() <- puts it to NULL
....
{tcp,unix}_start_outgoing_migration ->
socket_outgoing_migration
migration_channel_connect()
sets to_dst_file
if tls is enabled, we do another round through
migrate_channel_tls_connect(), but we only set it up if there is no
error. So we don't need the assignation. I am removing it to remove
in the follwing patches the knowledge about MigrationState in that two
files.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Historically the migration data channel has only needed to be
unidirectional. Thus the 'exec:' protocol was requesting an
I/O channel with O_RDONLY on incoming side, and O_WRONLY on
the outgoing side.
This is fine for classic migration, but if you then try to run
TLS over it, this fails because the TLS handshake requires a
bi-directional channel.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Both the ram bitmap and the unsent bitmap are split by RAMBlock.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Fix compilation when DEBUG_POSTCOPY is enabled (thanks Hailiang)
Commit d35ff5e6 ('block: Ignore guest dev permissions during incoming
migration') added blk_resume_after_migration() to the precopy migration
path, but neglected to add it to the duplicated code that is used for
postcopy migration. This means that the guest device doesn't request the
necessary permissions, which ultimately led to failing assertions.
Add the missing blk_resume_after_migration() to the postcopy path.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
-----BEGIN PGP SIGNATURE-----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=EsZ5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20170421' into staging
migration/next for 20170421
# gpg: Signature made Fri 21 Apr 2017 11:28:13 BST
# gpg: using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration/20170421: (65 commits)
hmp: info migrate_parameters format tunes
hmp: info migrate_capability format tunes
migration: rename max_size to threshold_size
migration: set current_active_state once
virtio-rng: stop virtqueue while the CPU is stopped
migration: don't close a file descriptor while it can be in use
ram: Remove migration_bitmap_extend()
migration: Disable hotplug/unplug during migration
qdev: Move qdev_unplug() to qdev-monitor.c
qdev: Export qdev_hot_removed
qdev: qdev_hotplug is really a bool
migration: Remove MigrationState parameter from migration_is_idle()
ram: Use RAMBitmap type for coherence
ram: rename last_ram_offset() last_ram_pages()
ram: Use ramblock and page offset instead of absolute offset
ram: Change offset field in PageSearchStatus to page
ram: Remember last_page instead of last_offset
ram: Use page number instead of an address for the bitmap operations
ram: reorganize last_sent_block
ram: ram_discard_range() don't use the mis parameter
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In migration codes (especially in migration_thread()), max_size is used
in many place for the threshold value that we will start to do the final
flush and jump to the next stage to dump the whole rest things to
destination. However its name is confusing to first readers. Let's
rename it to "threshold_size" when proper and add a comment for it. No
functional change is made.
CC: Juan Quintela <quintela@redhat.com>
CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We set it right above this one. No need to set it twice.
CC: Juan Quintela <quintela@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If we close the QEMUFile descriptor in process_incoming_migration_co()
while it has been stopped by an error, the postcopy_ram_listen_thread()
can try to continue to use it. And as the memory has been freed
it is working with an invalid pointer and crashes.
Fix this by releasing the memory after having managed the error
case (which, in fact, calls exit())
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit@kernel.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We have disabled memory hotplug, so we don't need to handle
migration_bitamp there.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Only user don't have a MigrationState handly.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This removes the needto pass also the absolute offset.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We are moving everything to work on pages, not addresses.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
--
Improve comment
Fix typo
We use an unsigned long for the page number. Notice that our bitmaps
already got that for the index, so we have that limit.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
rename page to page_abs everywhere.
fix trace types for pages
We were setting it far away of when we changed it. Now everything is
done inside save_page_header. Once there, reorganize code to pass
RAMState. We also set CONTINUE flag in a single place.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We change the meaning of start to be the offset from the beggining of
the block.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The number of dirty pages is output in 'pages' in the command
'info migrate', so add page-size to calculate the number of dirty
pages in bytes.
Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It was used as a size in all cases except one.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Remove it from callers and callees.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We need to call for the migrate_get_current() in more that half of the
uses, so call that inside.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We can calculate its value, so we don't create a variable for it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
After Peter and Dave review, I dropped the variable and just inlined
the condition.
Fix typo
We receive the file from save_live operations and we don't use it
until 3 or 4 levels of calls down.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Treat it like the rest of ram stats counters. Export its value the
same way. As an added bonus, no more MigrationState used in
migration_bitmap_sync();
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Again, dave was the one reviewing it
It can be recalculated from dirty_pages_rate.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Dave was the one that reviewed it O:-)
This is a ram field that was inside MigrationState. Move it to
RAMState and make it the same that the other ram stats.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
This are the last postcopy fields still at MigrationState. Once there
Move MigrationSrcPageRequest to ram.c and remove MigrationState
parameters where appropiate.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
It was on MigrationState when it is only used inside ram.c for
postcopy. Problem is that we need to access it without being able to
pass it RAMState directly.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Just unfold it. Move ram_bytes_remaining() with the rest of exported
functions.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Somewhere it was passed by reference, just use it from RAMState.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Once there, rename the type to be shorter.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
And then init only things that are not zero by default.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Once there, remove the now unused AccountingInfo struct and var.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Comment why we need bytes and pages
Its value can be calculated by other exported.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
For compatibility, we need to still send a value, but just specify it
and comment the fact.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Once there rename it to its actual meaning, zero_pages.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Renamed start_time to time_last_bitmap_sync(peterx suggestion)
We need to add a parameter to several functions to make this work.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
We create a struct where to put all the ram state
Start with the following fields:
last_seen_block, last_sent_block, last_offset, last_version and
ram_bulk_stage are globals that are really related together.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Fix typo and warnings
So all places are consistent on the naming of a block name parameter.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It reflects better what it does.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Added doc comments for existing functions comment and rewrite them in
a common style.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Fix Peter Xu comments
Improve postcopy comments as per reviews.
BLOCK_SIZE is (1 << 20), qcow2 cluster size is 65536 by default,
this may cause the qcow2 file size to be bigger after migration.
This patch checks each cluster, using blk_pwrite_zeroes for each
zero cluster.
[Initialize cluster_size to BLOCK_SIZE to prevent a gcc uninitialized
variable compiler warning. In reality we always initialize cluster_size
in a conditional but gcc doesn't know that.
--Stefan]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Message-id: 1492050868-16200-1-git-send-email-lidongchen@tencent.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Usually guest devices don't like other writers to the same image, so
they use blk_set_perm() to prevent this from happening. In the migration
phase before the VM is actually running, though, they don't have a
problem with writes to the image. On the other hand, storage migration
needs to be able to write to the image in this phase, so the restrictive
blk_set_perm() call of qdev devices breaks it.
This patch flags all BlockBackends with a qdev device as
blk->disable_perm during incoming migration, which means that the
requested permissions are stored in the BlockBackend, but not actually
applied to its root node yet.
Once migration has finished and the VM should be resumed, the
permissions are applied. If they cannot be applied (e.g. because the NBD
server used for block migration hasn't been shut down), resuming the VM
fails.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Postcopy doesn't support migration of RAM shared with another process
yet (we've got a bunch of things to understand).
Check for the case and don't allow postcopy to be enabled.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This problem affects s390x only if we are running without KVM.
Basically, S390CPU.irqstate is unused if we do not use KVM,
and thus no buffer is allocated.
This causes size=0, first_elem=NULL and n_elems=1 in
vmstate_load_state and vmstate_save_state. And the assert fails.
With this fix we can go back to the old behavior and support
VMS_VBUFFER with size 0 and nullptr.
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Increase bmds->cur_dirty after submit io, so reduce the frequency
involve into blk_drain, and improve the performance obviously
when block migration.
The performance test result of this patch:
During the block dirty save phase, this patch improve guest os IOPS
from 4.0K to 9.5K. and improve the migration speed from
505856 rsec/s to 855756 rsec/s.
Signed-off-by: Lidong Chen <jemmy858585@gmail.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The tls-creds parameter has a default value of NULL indicating
that TLS should not be used. Setting it to non-NULL enables
use of TLS. Once tls-creds are set to a non-NULL value via the
monitor, it isn't possible to set them back to NULL again, due
to current implementation limitations. The empty string is not
a valid QObject identifier, so this switches to use "" as the
default, indicating that TLS will not be used
The tls-hostname parameter has a default value of NULL indicating
the the hostname from the migrate connection URI should be used.
Again, once tls-hostname is set non-NULL, to override the default
hostname for x509 cert validation, it isn't possible to reset it
back to NULL via the monitor. The empty string is not a valid
hostname, so this switches to use "" as the default, indicating
that the migrate URI hostname should be used.
Using "" as the default for both, also means that the monitor
commands "info migrate_parameters" / "query-migrate-parameters"
will report existance of tls-creds/tls-parameters even when set
to their default values.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In function cpu_physical_memory_sync_dirty_bitmap, file
include/exec/ram_addr.h:
if (src[idx][offset]) {
unsigned long bits = atomic_xchg(&src[idx][offset], 0);
unsigned long new_dirty;
new_dirty = ~dest[k];
dest[k] |= bits;
new_dirty &= bits;
num_dirty += ctpopl(new_dirty);
}
After these codes executed, only the pages not dirtied in bitmap(dest),
but dirtied in dirty_memory[DIRTY_MEMORY_MIGRATION] will be calculated.
For example:
When ram_list.dirty_memory[DIRTY_MEMORY_MIGRATION] = 0b00001111,
and atomic_rcu_read(&migration_bitmap_rcu)->bmap = 0b00000011,
the new_dirty will be 0b00001100, and this function will return 2 but not
4 which is expected.
the dirty pages in dirty_memory[DIRTY_MEMORY_MIGRATION] are all new,
so these should be calculated also.
Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Migration is the only code left in the tree that does not react
to bdrv_is_allocated() failures. But as there is no useful way
to react to the failure, and we are merely skipping unallocated
sectors on success, just document that our choice of handling
is intended.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Note: The 'postcopy: Update userfaultfd.h header' is part of
Paolo's header update and will disappear if applied after it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=PCYv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170228a' into staging
Migration pull
Note: The 'postcopy: Update userfaultfd.h header' is part of
Paolo's header update and will disappear if applied after it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Tue 28 Feb 2017 12:38:34 GMT
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20170228a: (27 commits)
postcopy: Add extra check for COPY function
postcopy: Add doc about hugepages and postcopy
postcopy: Check for userfault+hugepage feature
postcopy: Update userfaultfd.h header
postcopy: Allow hugepages
postcopy: Send whole huge pages
postcopy: Mask fault addresses to huge page boundary
postcopy: Load huge pages in one go
postcopy: Use temporary for placing zero huge pages
postcopy: Plumb pagesize down into place helpers
postcopy: Record largest page size
postcopy: enhance ram_block_discard_range for hugepages
exec: ram_block_discard_range
postcopy: Chunk discards for hugepages
postcopy: Transmit and compare individual page sizes
postcopy: Transmit ram size summary word
migration: fix use-after-free of to_dst_file
migration: Update docs to discourage version bumps
migration: fix id leak regression
migrate: Introduce a 'dc->vmsd' check to avoid segfault for --only-migratable
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=g3ew
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Tue 28 Feb 2017 20:35:32 GMT
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (46 commits)
block: Add Error parameter to bdrv_append()
block: Add Error parameter to bdrv_set_backing_hd()
block: Assertions for resize permission
block: Assertions for write permissions
block: Pass BdrvChild to bdrv_aligned_preadv/pwritev and copy-on-read
tests: Remove FIXME comments
nbd/server: Use real permissions for NBD exports
migration/block: Use real permissions
hmp: Request permissions in qemu-io
commit: Add filter-node-name to block-commit
mirror: Add filter-node-name to blockdev-mirror
stream: Use real permissions in streaming block job
mirror: Use real permissions in mirror/active commit block job
blockjob: Factor out block_job_remove_all_bdrv()
block: Allow backing file links in change_parent_backing_link()
block: BdrvChildRole.attach/detach() callbacks
block: Fix pending requests check in bdrv_append()
backup: Use real permissions in backup block job
commit: Use real permissions for HMP 'commit'
commit: Use real permissions in commit block job
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Request BLK_PERM_CONSISTENT_READ for the source of block migration, and
handle potential permission errors as good as we can in this place
(which is not very good, but it matches the other failure cases).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Now that blk_insert_bs() requests the BlockBackend permissions for the
node it attaches to, it can fail. Instead of aborting, pass the errors
to the callers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
We want every user to be specific about the permissions it needs, so
we'll pass the initial permissions as parameters to blk_new(). A user
only needs to call blk_set_perm() if it wants to change the permissions
after the fact.
The permissions are stored in the BlockBackend and applied whenever a
BlockDriverState should be attached in blk_insert_bs().
This does not include actually choosing the right set of permissions
everywhere yet. Instead, the usual FIXME comment is added to each place
and will be addressed in individual patches.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
We can call this qmp command to do checkpoint outside of qemu.
Xen colo will need this function.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wencongyang@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
We can call this qmp command to start/stop replication outside of qemu.
Like Xen colo need this function.
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wencongyang@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
As an extra sanity check, make sure the region we're registering
can perform UFFDIO_COPY; the COPY will fail later but this
gives a cleaner failure.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-17-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We need extra Linux kernel support (~4.11) to support userfaults
on hugetlbfs; check for them.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-15-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Allow huge pages in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-13-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The RAM save code uses ram_save_host_page to send whole
host pages at a time; change this to use the host page size associated
with the RAM Block which may be a huge page.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-12-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently the fault address received by userfault is rounded to
the host page boundary and a host page is requested from the source.
Use the current RAMBlock page size instead of the general host page
size so that for RAMBlocks backed by huge pages we request the whole
huge page.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-11-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The existing postcopy RAM load loop already ensures that it
glues together whole host-pages from the target page size chunks sent
over the wire. Modify the definition of host page that it uses
to be the RAM block page size and thus be huge pages where appropriate.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-10-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The kernel can't do UFFDIO_ZEROPAGE for huge pages, so we have
to allocate a temporary (always zero) page and use UFFDIO_COPYPAGE
on it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-9-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Now we deal with normal size pages and huge pages we need
to tell the place handlers the size we're dealing with
and make sure the temporary page is large enough.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-8-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Record the largest page size in use; we'll need it soon for allocating
temporary buffers.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-7-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Create ram_block_discard_range in exec.c to replace
postcopy_ram_discard_range and most of ram_discard_range.
Those two routines are a bit of a weird combination, and
ram_discard_range is about to get more complex for hugepages.
It's OS dependent code (so shouldn't be in migration/ram.c) but
it needs quite a bit of the innards of RAMBlock so doesn't belong in
the os*.c.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-5-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
At the start of the postcopy phase, partially sent huge pages
must be discarded. The code for dealing with host page sizes larger
than the target page size can be reused for this case.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170224182844.32452-4-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When using postcopy with hugepages, we require the source
and destination page sizes for any RAMBlock to match; note
that different RAMBlocks in the same VM can have different
page sizes.
Transmit them as part of the RAM information header and
fail if there's a difference.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170224182844.32452-3-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Replace the host page-size in the 'advise' command by a pagesize
summary bitmap; if the VM is just using normal RAM then
this will be exactly the same as before, however if they're using
huge pages they'll be different, and thus:
a) Migration from/to old qemu's that don't understand huge pages
will fail early.
b) Migrations with different size RAMBlocks will also fail early.
This catches it very early; earlier than the detailed per-block
check in the next patch.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170224182844.32452-2-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
hmp_savevm calls qemu_savevm_state(f), which sets to_dst_file=f in
global migration state. Then hmp_savevm closes f (g_free called).
Next access to to_dst_file in migration state (for example,
qmp_migrate_set_speed) will use it after it was freed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170225193155.447462-5-vsementsov@virtuozzo.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This leak was introduced in commit
581f08bac2.
(it stands out quickly with ASAN once the rest of the leaks are also
removed from make check with this series)
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170221141451.28305-31-marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit a3a3d8c7 introduced a segfault bug while checking for
'dc->vmsd->unmigratable' which caused QEMU to crash when trying to add
devices which do no set their 'dc->vmsd' yet while initialization.
Place a 'dc->vmsd' check prior to it so that we do not segfault for
such devices.
NOTE: This doesn't compromise the functioning of --only-migratable
option as all the unmigratable devices do set their 'dc->vmsd'.
Introduce a new function check_migratable() and move the
only_migratable check inside it, also use stubs to avoid user-mode qemu
build failures.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1487009088-23891-1-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Make VMS_ARRAY_OF_POINTER cope with null pointers. Previously the
reward for trying to migrate an array with some null pointers in it was
an illegal memory access, that is a swift and painless death of the
process. Let's make vmstate cope with this scenario.
The general approach is, when we encounter a null pointer (element),
instead of following the pointer to save/load the data behind it, we
save/load a placeholder. This way we can detect if we expected a null
pointer at the load side but not null data was saved instead.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170222160119.52771-4-pasic@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently vmstate_base_addr does several things: it pinpoints the field
within the struct, possibly allocates memory and possibly does the first
pointer dereference. Obviously allocation is needed only for load.
Let us split up the functionality in vmstate_base_addr and move the
address manipulations (that is everything but the allocation logic) to
load and save so it becomes more obvious what is actually going on. Like
this all the address calculations (and the handling of the flags
controlling these) is in one place and the sequence is more obvious.
The newly introduced function vmstate_handle_alloc also fixes the
allocation for the unused VMS_VBUFFER|VMS_MULTIPLY|VMS_ALLOC scenario
and is substantially simpler than the original vmstate_base_addr.
In load and save some asserts are added so it's easier to debug
situations where we would end up with a null pointer dereference.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170222160119.52771-3-pasic@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The vmstate_(load|save)_state start out with an a void *opaque pointing
to some struct, and manipulate one or more elements of one field within
that struct.
First the field within the struct is pinpointed as opaque + offset, then
if this is a pointer the pointer is dereferenced to obtain a pointer to
the first element of the vmstate field. Pointers to further elements if
any are calculated as first_element + i * element_size (where i is the
zero based index of the element in question).
Currently base_addr and addr is used as a variable name for the pointer
to the first element and the pointer to the current element being
processed. This is suboptimal because base_addr is somewhat
counter-intuitive (because obtained as base + offset) and both base_addr
and addr not very descriptive (that we have a pointer should be clear
from the fact that it is declared as a pointer).
Let make things easier to understand by renaming base_addr to first_elem
and addr to curr_elem. This has the additional benefit of harmonizing
with other names within the scope (n_elems, vmstate_n_elems).
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170222160119.52771-2-pasic@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
