Commit Graph

12 Commits

Author SHA1 Message Date
Kővágó, Zoltán 8c3a7d0087 qapi: qapi for audio backends
This patch adds structures into qapi to replace the existing
configuration structures used by audio backends currently. This qapi
will be the base of the -audiodev command line parameter (that replaces
the old environment variables based config).

This is not a 1:1 translation of the old options, I've tried to make
them much more consistent (e.g. almost every backend had an option to
specify buffer size, but the name was different for every backend, and
some backends required usecs, while some other required frames, samples
or bytes). Also tried to reduce the number of abbreviations used by the
config keys.

Some of the more important changes:
* use `in` and `out` instead of `ADC` and `DAC`, as the former is more
  user friendly imho
* moved buffer settings into the global setting area (so it's the same
  for all backends that support it. Backends that can't change buffer
  size will simply ignore them). Also using usecs, as it's probably more
  user friendly than samples or bytes.
* try-poll is now an alsa backend specific option (as all other backends
  currently ignore it)

Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 5461b514dbf3e0bc31b0abb6498a9b3a008c271e.1552083282.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-11 10:29:26 +01:00
Daniel P. Berrange c8c99887d1 authz: add QAuthZList object type for an access control list
Add a QAuthZList object type that implements the QAuthZ interface. This
built-in implementation maintains a trivial access control list with a
sequence of match rules and a final default policy. This replicates the
functionality currently provided by the qemu_acl module.

To create an instance of this object via the QMP monitor, the syntax
used would be:

  {
    "execute": "object-add",
    "arguments": {
      "qom-type": "authz-list",
      "id": "authz0",
      "props": {
        "rules": [
           { "match": "fred", "policy": "allow", "format": "exact" },
           { "match": "bob", "policy": "allow", "format": "exact" },
           { "match": "danb", "policy": "deny", "format": "glob" },
           { "match": "dan*", "policy": "allow", "format": "exact" },
        ],
        "policy": "deny"
      }
    }
  }

This sets up an authorization rule that allows 'fred', 'bob' and anyone
whose name starts with 'dan', except for 'danb'. Everyone unmatched is
denied.

It is not currently possible to create this via -object, since there is
no syntax supported to specify non-scalar properties for objects. This
is likely to be addressed by later support for using JSON with -object,
or an equivalent approach.

In any case the future "authz-listfile" object can be used from the
CLI and is likely a better choice, as it allows the ACL to be refreshed
automatically on change.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2019-02-26 15:32:18 +00:00
Markus Armbruster 61eb9e80d5 qapi: New module target.json
We can't add appropriate target-specific conditionals to misc.json,
because that would make all of misc.json unusable in
target-independent code.  To keep misc.json target-independent, we
need to split off target-dependent target.json.

This commit doesn't actually split off anything, it merely creates the
empty module.  The next few patches will move stuff from misc.json
there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-9-armbru@redhat.com>
2019-02-18 14:44:04 +01:00
Markus Armbruster 88554a2005 build: Deal with all of QAPI's .o in qapi/Makefile.objs
Adding QAPI's .o to util-obj-y, common-obj-y and obj-y is spread over
three places: Makefile.objs takes care of target-independent generated
code, Makefile.target of target-dependent generated code, and
qapi/Makefile.objs of (target-independent) hand-written code.

Do everything in qapi/Makefile.objs.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190214152251.2073-8-armbru@redhat.com>
2019-02-18 14:44:04 +01:00
Daniel P. Berrange b3db211f3c qapi: rename *qmp-*-visitor* to *qobject-*-visitor*
The QMP visitors have no direct dependency on QMP. It is
valid to use them anywhere that one has a QObject. Rename them
to better reflect their functionality as a generic QObject
to QAPI converter.

This is the first of three parts: rename the files.  The next two
parts will rename C identifiers.  The split is necessary to make git
rename detection work.

Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Split into file and identifier rename, two comments touched up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-25 16:25:48 +02:00
Eric Blake a15fcc3cf6 qapi: Add new clone visitor
We have a couple places in the code base that want to deep-clone
one QAPI object into another, and they were resorting to serializing
the struct out to QObject then reparsing it.  A much more efficient
version can be done by adding a new clone visitor.

Since cloning is still relatively uncommon, expose the use of the
new visitor via a QAPI_CLONE() macro that takes care of type-punning
the underlying function pointer, rather than generating lots of
unused functions for types that won't be cloned.  And yes, we're
relying on the compiler treating all pointers equally, even though
a strict C program cannot portably do so - but we're not the first
one in the qemu code base to expect it to work (hello, glib!).

The choice of adding a fourth visitor type deserves some explanation.
On the surface, the clone visitor is mostly an input visitor (it
takes arbitrary input - in this case, another QAPI object - and
creates a new QAPI object during the course of the visit).  But
ever since commit da72ab0 consolidated enum visits based on the
visitor type, using VISITOR_INPUT would cause us to run
visit_type_str(), even though for cloning there is nothing to do
(we just copy the enum value across, without regards to its mapping
to strings).   Also, since our input happens to be a QAPI object,
we can also satisfy the internal checks for VISITOR_OUTPUT.  So in
the end, I settled with a new VISITOR_CLONE, and chose its value
such that many internal checks can use 'v->type & mask', sticking
to 'v->type == value' where the difference matters.

Note that we can only clone objects (including alternates) and lists,
not built-ins or enums.  The visitor core hides integer width from
the actual visitor (since commit 04e070d), and as long as that's the
case, we can't clone top-level integers.  Then again, those can
always be cloned by direct copy, since they are not objects with
deep pointers, so it's no real loss.  And restricting cloning to
just objects and lists is cleaner than restricting it to non-integers.
As such, I documented that the clone visitor is for direct use only
by code internal to QAPI, and should not be used on incomplete objects
(other than a hack to work around the fact that we allow NULL in place
of "" in visit_type_str() in other output visitors).  Note that as
written, the clone visitor will never fail on a complete object.

Scalars (including enums) not at the root of the clone copy just fine
with no additional effort while visiting the scalar, by virtue of a
g_memdup() each time we push another struct onto the stack.  Cloning
a string requires deduplication of a pointer, which means it can also
provide the guarantee of an input visitor of never producing NULL
even when still accepting NULL in place of "" the way the QMP output
visitor does.

Cloning an 'any' type could be possible by incrementing the QObject
refcnt, but it's not obvious whether that is better than implementing
a QObject deep clone.  So for now, we document it as unsupported,
and intentionally omit the .type_any() callback to let a developer
know their usage needs implementation.

Add testsuite coverage for several different clone situations, to
ensure that the code is working.  I also tested that valgrind was
happy with the test.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-14-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06 10:52:04 +02:00
Peter Lieven 9e7dac7c6c rename parse_enum_option to qapi_enum_parse and make it public
relaxing the license to LGPLv2+ is intentional.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit.canet@nodalink.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-08 11:12:43 +01:00
Wenchao Xia f882126024 qapi: add event helper functions
This file holds some functions that do not need to be generated.

Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23 11:01:25 -04:00
Paolo Bonzini 576d55068d build: move base QAPI files to libqemuutil.a
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12 18:42:51 +01:00
Paolo Bonzini 63186e56c8 build: opts-visitor is not really part of QAPI
It is only used by QEMU itself, do not build it into the tests.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-30 09:30:52 +01:00
Laszlo Ersek eb7ee2cbeb qapi: introduce OptsVisitor
This visitor supports parsing

  -option [type=]discriminator[,optarg1=val1][,optarg2=val2][,...]

style QemuOpts objects into "native" C structures. After defining the type
tree in the qapi schema (see below), a root type traversal with this
visitor linked to the underlying QemuOpts object will build the "native" C
representation of the option.

The type tree in the schema, corresponding to an option with a
discriminator, must have the following structure:

  struct
    scalar member for non-discriminated optarg 1 [*]
    list for repeating non-discriminated optarg 2 [*]
      wrapper struct
        single scalar member
    union
      struct for discriminator case 1
        scalar member for optarg 3 [*]
        list for repeating optarg 4 [*]
          wrapper struct
            single scalar member
        scalar member for optarg 5 [*]
      struct for discriminator case 2
        ...

The "type" optarg name is fixed for the discriminator role. Its schema
representation is "union of structures", and each discriminator value must
correspond to a member name in the union.

If the option takes no "type" descriminator, then the type subtree rooted
at the union must be absent from the schema (including the union itself).

Optarg values can be of scalar types str / bool / integers / size.

Members marked with [*] may be defined as optional in the schema,
describing an optional optarg.

Repeating an optarg is supported; its schema representation must be "list
of structure with single mandatory scalar member". If an optarg is not
described as repeating in the schema (ie. it is defined as a scalar field
instead of a list), its last occurrence will take effect. Ordering between
differently named optargs is not preserved.

A mandatory list (or an optional one which is reported to be available),
corresponding to a repeating optarg, has at least one element after
successful parsing.

v1->v2:
- Update opts_type_size() prototype to uint64_t.
- Add opts_type_uint64() for options needing the full uint64_t range.
  (Internals could be extracted to "cutils.c".)
- Allow negative values in opts_type_int().
- Rebase to nested Makefiles.

v2->v3:
- Factor opts_visitor_insert() out of opts_start_struct() and call it
  separately for opts_root->id if there's any.
- Don't require non-negative values in opts_type_int()'s error message.
- g_malloc0() may return NULL for zero-sized requests. Support empty
  structures by requesting 1 byte for them instead.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-07-23 11:55:17 +01:00
Paolo Bonzini dd5614d6f1 build: move qapi/ objects to nested Makefile.objs
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07 09:21:15 +02:00