Commit Graph

23 Commits

Author SHA1 Message Date
Lluís Vilanova ca66f1a174 disas: Remove unused macro '_'
Eliminates a future compilation error when UI code includes the tracing
headers (indirectly pulling "disas/bfd.h" through "qom/cpu.h") and
GLib's i18n '_' macro.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-18 18:13:54 +01:00
Yongbok Kim 01bc435b44 target-mips: implement R6 multi-threading
MIPS Release 6 provides multi-threading features which replace
pre-R6 MT Module. CP0.Config3.MT is always 0 in R6, instead there is new
CP0.Config5.VP (Virtual Processor) bit which indicates presence of
multi-threading support which includes CP0.GlobalNumber register and
DVP/EVP instructions.

Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-02-26 08:59:17 +00:00
Peter Maydell c684822ad2 mips: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-01-23 14:30:04 +00:00
James Hogan d76f365350 disas/mips: Add R6 jr/jr.hb to disassembler
MIPS r6 encodes jr as jalr zero, and jr.hb as jalr.hb zero, so add these
encodings to the MIPS disassembly table.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1443788657-14537-3-git-send-email-james.hogan@imgtec.com>
2015-10-19 11:04:38 -10:00
Yongbok Kim 6b9c26fb5e disas/mips: fix disassembling R6 instructions
In the Release 6 of the MIPS Architecture, LL, SC, LLD, SCD, PREF
and CACHE instructions have 9 bits offsets.

Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-07-15 14:07:20 +01:00
Leon Alrae 5204ea79ea target-mips: add MTHC0 and MFHC0 instructions
Implement MTHC0 and MFHC0 instructions. In MIPS32 they are used to access
upper word of extended to 64-bits CP0 registers.

In MIPS64, when CP0 destination register specified is the EntryLo0 or
EntryLo1, bits 1:0 of the GPR appear at bits 31:30 of EntryLo0 or
EntryLo1. This is to compensate for RI and XI, which were shifted to bits
63:62 by MTC0 to EntryLo0 or EntryLo1. Therefore creating separate
functions for EntryLo0 and EntryLo1.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-12 09:05:31 +01:00
Leon Alrae ce9782f40a target-mips: add ERETNC instruction and Config5.LLB bit
ERETNC is identical to ERET except that an ERETNC will not clear the LLbit
that is set by execution of an LL instruction, and thus when placed between
an LL and SC sequence, will never cause the SC to fail.

Presence of ERETNC is denoted by the Config5.LLB.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-11 10:13:29 +01:00
Leon Alrae 8ef3915263 disas/mips: disable unused mips16_to_32_reg_map[]
This array is used by print_mips16_insn_arg() which is guarded by #if 0.
Therefore doing the same with the array as it generates clang warnings.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-12-16 12:45:20 +00:00
Leon Alrae 8e5f757044 disas/mips: remove unused mips_msa_control_names_numeric[32]
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-16 12:45:20 +00:00
Yongbok Kim ed8a933f97 disas/mips.c: disassemble MSA instructions
disassemble MIPS SIMD Architecture instructions

Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03 11:48:35 +00:00
Leon Alrae 9456c2fbcd target-mips: add TLBINV support
For Standard TLB configuration (Config.MT=1):

TLBINV invalidates a set of TLB entries based on ASID. The virtual address is
ignored in the entry match. TLB entries which have their G bit set to 1 are not
modified.

TLBINVF causes all entries to be invalidated.

Single TLB entry can be marked as invalid on TLB entry write by having
EntryHi.EHINV set to 1.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03 11:48:34 +00:00
Yongbok Kim 0aefa33318 target-mips: remove JR, BLTZAL, BGEZAL and add NAL, BAL instructions
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-14 13:28:52 +01:00
Yongbok Kim 3f4938833c target-mips: add new Floating Point Comparison instructions
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-14 13:28:52 +01:00
Leon Alrae e7f16abbc5 target-mips: add new Floating Point instructions
In terms of encoding MIPS32R6 MIN.fmt, MAX.fmt, MINA.fmt, MAXA.fmt replaced
MIPS-3D RECIP1, RECIP2, RSQRT1, RSQRT2 instructions.

In R6 all Floating Point instructions are supposed to be IEEE-2008 compliant
i.e. FIR.HAS2008 always 1. However, QEMU softfloat for MIPS has not been
updated yet.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-10-14 13:28:51 +01:00
Leon Alrae d4ea6acdf6 target-mips: add AUI, LSA and PCREL instruction families
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-10-14 13:26:54 +01:00
Yongbok Kim 31837be3ee target-mips: add compact and CP1 branches
Introduce MIPS32R6 Compact Branch instructions which do not have delay slot -
they have forbidden slot instead. However, current implementation does not
support forbidden slot yet.

Add also BC1EQZ and BC1NEZ instructions.

Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-10-13 12:38:25 +01:00
Yongbok Kim 15eacb9b52 target-mips: add ALIGN, DALIGN, BITSWAP and DBITSWAP instructions
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-13 12:38:25 +01:00
Leon Alrae 4267d3e6e0 target-mips: move CLO, DCLO, CLZ, DCLZ, SDBBP and free special2 in R6
Also consider OPC_SPIM instruction as deleted in R6 because it is overlaping
with MIPS32R6 SDBBP.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-13 12:38:25 +01:00
Leon Alrae b42ee5e1d9 target-mips: redefine Integer Multiply and Divide instructions
Use "R6_" prefix in front of all new Multiply / Divide instructions for
easier differentiation between R6 and preR6.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-13 12:38:24 +01:00
Leon Alrae bf7910c6b1 target-mips: move PREF, CACHE, LLD and SCD instructions
The encoding of PREF, CACHE, LLD and SCD instruction changed in MIPS32R6.
Additionally, the hint codes in PREF instruction greater than or
equal to 24 generate Reserved Instruction Exception.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-13 12:38:24 +01:00
Leon Alrae 4368b29a26 target-mips: move LL and SC instructions
The encoding of LL and SC instruction has changed in MIPS32 Release 6.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
2014-10-13 12:38:24 +01:00
Leon Alrae b691d9d2a0 target-mips: add SELEQZ and SELNEZ instructions
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
2014-10-13 12:38:24 +01:00
Paolo Bonzini 76cad71136 build: kill libdis, move disassemblers to disas/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:29:06 +01:00