The previous patches replaced u_int8_t, u_int16_t, u_int32_t, u_int64_t
by standard int types from stdint.h,
so we can now remove their declarations which are no longer needed.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There is no need to have a second set of integral types.
Replace them by the standard types from stdint.h.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There is no need to have a second set of integral types.
Replace them by the standard types from stdint.h.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There is no need to have a second set of integral types.
Replace them by the standard types from stdint.h.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit 36388314fe moved most of the
interrupt logic to cpu-exec.c. Remove the remaining useless code
and fix software interrupts.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Edgar E. Iglesias <edgar@axis.com>
Tested-by: Edgar E. Iglesias <edgar@axis.com>
Use setcond for evaluating the condition for branches.
In the future, we could do better for branches without
delay slots.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
this patch removes unused function cpu_restore_state_copy().
Signed-off-by: Jun Koi <junkoi2004@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch replaces constant value assigned for (DisasContext
*)->is_jmp with DISAS_TB_JUMP.
Signed-off-by: Jun Koi <junkoi2004@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
When hw interrupt pending bits in CP0_Cause are set, the CPU should
see the hw interrupt line as active. The CPU may or may not take the
interrupt based on internal state (global irq mask etc) but the glue
logic shouldn't care.
This fixes MIPS external hw interrupts in combination with -icount.
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
There is disagreement between microblaze glibc and the kernel
to what the third arg of signal handlers should point to.
Change QEMU linux-user to match the kernel port. glibc patches
are pending.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
Both values are only used in exec.c, so there is no need
to make them globally available.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The request completion callback of the LSI controller may start the next
request that can use the same tag as the completed one. As the latter is
still enqueued at that point, scsi_send_command will complain about the
tag reuse and cancel the completed request. That will cause a double
free later on when the completion path cleans up as well.
Fix this by dequeuing the request before invoking the callback.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This change fixes initialization of e1000's microwire EEPROM internal
state values so that qemu's e1000 emulation works on NetBSD,
which doesn't use Intel's em driver but has its own wm driver
for the Intel i8254x Gigabit Ethernet.
Previously set_eecd() function in e1000.c clears EEPROM internal state
values on SK rising edge during CS==L, but according to FM93C06 EEPROM
(which is MicroWire compatible) data sheet, EEPROM internal status
should be cleared on CS rise edge regardless of SK input:
"... a rising edge on this (CS) signal is required to reset the internal
state-machine to accept a new cycle .."
and nothing should be changed during CS (chip select) is inactive.
Intel's em driver seems to explicitly raise SK output after CS is negated
in em_standby_eeprom() so many other OSes that use Intel's driver
don't have this problem even on the previous e1000.c implementation,
but I can't find any articles that say the MICROWIRE or EEPROM spec
requires such sequence, and actually hardware works fine without it
(i.e. real i82540EM has been working on NetBSD).
This fix also changes initialization to clear each state value in
struct eecd_state individually rather than using memset() against
the whole structre. The old_eecd member stores the last SK and CS
signal levels and it should be preserved even after reset of internal
EEPROM state to detect next signal edges for proper EEPROM emulation.
Signed-off-by: Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Guest debugging is currently broken under CONFIG_IOTHREAD. The reason is
inconsistent or even lacking signaling the debug events from the source
VCPU to the main loop and the gdbstub.
This patch addresses the issue by pushing this signaling into a
CPUDebugExcpHandler: cpu_debug_handler is registered as first handler,
thus will be executed last after potential breakpoint emulation
handlers. It sets informs the gdbstub about the debug event source,
requests a debug exit of the main loop and stops the current VCPU. This
mechanism works both for TCG and KVM, with and without IO-thread.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
These functions are also used for kvm under !CONFIG_IOTHREAD, having
'tcg' in their name is just misleading.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When checking for I/O events in the tcg CPU loop, make sure that we
call qemu_wait_io_event_common for all CPUs, not only the current one.
Otherwise pause_all_vcpus may lock up or run_on_cpu requests may starve.
Rename qemu_wait_io_event to qemu_tcg_wait_io_event at this chance and
purge its argument list as it has no use for it.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If a cpu_exit request is pending, ensure that we leave the CPU loop
quickly. For this purpose, keep the global exit_request pending until
we are about to leave tcg_cpu_exec. Also, immediately break out of the
SMP loop if the request is set, do not run till the end of the chain.
This preserves the VCPU scheduling order in SMP mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If a signal hit after the env->exit_request check but before cpu_exec
updated env->current_tb, cpu_unlink_tb called from the signal hander
will not unlink the current TB. This may leave us stuck in a guest loop
if no further unlink is invoked.
Fix this by reordering current_tb update and exit_request check,
additionally enforcing the correct order via a compiler barrier.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Starting with qemu -M pc-0.12 -device virtio-serial
results in
-device virtio-serial: Property 'virtio-serial-pci.max_nr_ports' not found
The property name 'max_ports' is incorrectly named 'max_nr_ports'. Fix
that.
Also fix the ppc440 machine type bamboo-0.12 which has this typo.
Reported-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
As it is done for qemu-system with "-cpu ?", when cpu_list_id() is missing
for a target, call cpu_list() instead.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use empty_slot to reserve addresses for several unimplemented devices so they won't fault.
- BPP (parallel port), DBRI (audio), SX (pixel processor), and vsimms (framebuffer)
OBP for SS-20 either assumes these devices exist or probes without expecting faults.
Signed-off-by: Bob Breuer <breuerr@mc.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
CVE-2008-2004 described a vulnerability in QEMU whereas a malicious user could
trick the block probing code into accessing arbitrary files in a guest. To
mitigate this, we added an explicit format parameter to -drive which disabling
block probing.
Fast forward to today, and the vast majority of users do not use this parameter.
libvirt does not use this by default nor does virt-manager.
Most users want block probing so we should try to make it safer.
This patch adds some logic to the raw device which attempts to detect a write
operation to the beginning of a raw device. If the first 4 bytes happen to
match an image file that has a backing file that we support, it scrubs the
signature to all zeros. If a user specifies an explicit format parameter, this
behavior is disabled.
I contend that while a legitimate guest could write such a signature to the
header, we would behave incorrectly anyway upon the next invocation of QEMU.
This simply changes the incorrect behavior to not involve a security
vulnerability.
I've tested this pretty extensively both in the positive and negative case. I'm
not 100% confident in the block layer's ability to deal with zero sized writes
particularly with respect to the aio functions so some additional eyes would be
appreciated.
Even in the case of a single sector write, we have to make sure to invoked the
completion from a bottom half so just removing the zero sized write is not an
option.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 5989020bc1 introduced a chardev
option to disable signals on stdio. Add the corresponding documentation.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Disks without media make no sense. For SCSI, a Linux guest kernel
complains during boot. I didn't try other combinations.
scsi-generic doesn't need the additional check, because it already
requires bdrv_is_sg(), which fails without media.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the check from virtio_blk_init_pci(), where it protects only
virtio-blk-pci, to virtio_blk_init(). Without that, virtio-blk-s390
initializes without a drive. I figure that can lead to null pointer
dereferences.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It can't actually fail now, but the next commit will change that.
s390_virtio_blk_init() already checks for failure, but
virtio_blk_init_pci() doesn't. Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When there is no block driver associate with BlockDriverState bdrv_getlength
returns -ENOMEDIUM that cause block migration to fail
Signed-off-by: Shahar Havivi <shaharh@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace rebase by resize in documentation of resize command.
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In addition to the previous fix for calling do_flush_queued_data() only
when the virtqueue is ready, ensure do_flush_queued_data() gets a vq
that's suitably initialised.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If a virtio-serial port is removed before the guest comes up and
initialises the virtqueues, qemu exits with the message
Guest moved used index from 0 to 61440
This happens because we try to clear any pending buffers from the
virtqueue.
Ensure the virtqueue is initialised before calling any virtqueue
operations.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While running in debug mode if 9P server is unable to open the log file
it results in a SEGV deep down in glibc:
Program received signal SIGSEGV, Segmentation fault.
0x008fca8c in fwrite () from /lib/libc.so.6
(gdb) bt
#0 0x008fca8c in fwrite () from /lib/libc.so.6
#1 0x081eb87e in pprint_pdu (pdu=0x89a52e1c)
at /data/sripathi/code/qemu/new/qemu-next-upstream/hw/virtio-9p-debug.c:380
#2 0x0806dad8 in submit_pdu (s=0x897dc008, pdu=0x89a52e1c)
at /data/sripathi/code/qemu/new/qemu-next-upstream/hw/virtio-9p.c:3092
#3 0x0806dc63 in handle_9p_output (vdev=0x897dc008, vq=0x86d8218)
at /data/sripathi/code/qemu/new/qemu-next-upstream/hw/virtio-9p.c:3122
#4 0x081ac728 in virtio_queue_notify (vdev=0x897dc008, n=0)
at /data/sripathi/code/qemu/new/qemu-next-upstream/hw/virtio.c:563
#5 0x08063876 in virtio_ioport_write (opaque=0x86d7b98, addr=16, val=0)
at /data/sripathi/code/qemu/new/qemu-next-upstream/hw/virtio-pci.c:222
#6 0x08063e26 in virtio_pci_config_writew (opaque=0x86d7b98, addr=16, val=0)
at /data/sripathi/code/qemu/new/qemu-next-upstream/hw/virtio-pci.c:357
#7 0x080c881a in ioport_write (index=1, address=49296, data=0) at ioport.c:80
#8 0x080c8d4c in cpu_outw (addr=49296, val=0) at ioport.c:204
#9 0x08073010 in kvm_handle_io (port=49296, data=0xab393000, direction=1, size=2, count=1)
at /data/sripathi/code/qemu/new/qemu-next-upstream/kvm-all.c:735
...
...
This is ugly and misleading. The following patch adds a BUG_ON to catch this
error. With this patch we get an abort message like the following, which makes
it easier to analyze:
f12-kvm login: qemu: /data/sripathi/code/qemu/new/qemu-next-upstream/hw/virtio-9p-debug.c:353: pprint_pdu: Assertion `!(!llogfile)' failed.
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
No need to call cpu_register_physical_memory() for a zero sized area.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
- 17d3e46 smbios: Allow all fields to be set via qemu_cfg_smbios_load_field()
- 0d6b8d5 seabios: pciinit: use pci device initializer helper function.
- 968d3a8 seabios: pci: introduce helper function to initialize a given device.
- 4e0daae virtio: Clear interrupt status register in virtio-blk
- af0963d seabios: pciinit: initialize pci bridge filtering registers.
- f441666 seabios: pciinit: pci bridge bus initialization.
- 5d0de15 seabios: pciinit: make bar offset calculation pci bridge aware.
- a65821d seabios: pciinit: factor out bar offset calculation.
- 0a8eada seabios: pciinit: make pci bar assigner preferchable memory aware.
- dfd94fa seabios: pciinit: make pci memory space assignment 64bit aware.
- b9e4721 seabios: pciinit: factor out pci bar region allocation logic.
- edd9911 seabios: pci: introduce foreachpci_in_bus() helper macro.
- f79a462 Add romfile_size() wrapper for accessing cbfs/qemu_cfg files.
- afbed1b Initial bootsplash support.
- 83d6ed6 Update TODO
- 1d7d893 Fix bvprintf() to respect padding for hex printing.
- e230426 Unify optionrom cbfs/qemu_cfg rom pulling code.
- 8cb8ba5 SeaBIOS VGA hooks
- 203f6f3 SeaBIOS CD/DVD abbreviations
- 12cbb43 seabios: remove iasl output file when error.
- d5d02b6 Allocate cdemu buffer in low mem instead of ebda.
- 8f59aa3 Introduce memcpy_fl - a memcpy on "flat" pointers.
- 42a1d4c Rework malloc to use a "first fit" algorithm.
- 34e9cc5 Minor mptable changes.
- 0f3783b virtio: clean up memory barrier usage
- bfe4d60 virtio: remove NO_NOTIFY optimization
- bb68591 Don't use RTC to time boot menu delay.
- b5cc2ca Generalize timer based delay code.
- 144817b Rename check_time() to check_tsc().
- 9c447c3 Allow wait_irq to be called in 32bit code.
- 49cc72b Improve optionrom debugging statements.
- c65a4a6 Minor - compile out usb-msc code if CONFIG_USB_MSC not set.
- 456479e Minor ata cleanups.
- 2515a72 Make sure virtio-blk is fully compiled out if not wanted.
- c4fe135 Minor - split up virtio_blk_setup().
- 4030db0 fix two issues with virtio-blk
- ea8ac63 Minor improvements to virtio (allow irqs, allocate page aligned).
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
