Commit Graph

1463 Commits

Author SHA1 Message Date
Paolo Bonzini c8ee0a445a linux-user: convert DEBUG_SIGNAL logging to tracepoints
"Unimplemented" messages go to stderr, everything else goes to tracepoints

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:48 +01:00
Paolo Bonzini 120a9848c2 linux-user: avoid "naked" qemu_log
Ensure that all log writes are protected by qemu_loglevel_mask or,
in serious cases, go to both the log and stderr.

Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:48 +01:00
Paolo Bonzini 1382902055 user: introduce "-d page"
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:48 +01:00
Paolo Bonzini 013a29424c qemu-log: introduce qemu_log_separate
In some cases, the same message is printed both on stderr and in the log.
Avoid duplicate output in the default case where stderr _is_ the log,
and standardize this to stderr+log where it used to use stdio+log.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17 17:33:47 +01:00
Paolo Bonzini 0c2d70c448 translate-all: ensure host page mask is always extended with 1's
Anthony reported that >4GB guests on Xen with 32bit QEMU broke after
commit 4ed023c ("Round up RAMBlock sizes to host page sizes", 2015-11-05).

In that patch sizes are masked against qemu_host_page_size/mask which
are uintptr_t, and thus 32bit on a 32bit QEMU, even though the ram space
might be bigger than 4GB on Xen.

Since ram_addr_t is not available on user-mode emulation targets, ensure
that we get a sign extension when masking away the low bits of the address.
Remove the ~10 year old scary comment that the type of these variables
is probably wrong, with another equally scary comment.  The new comment
however does not have "???" in it, which is arguably an improvement.

For completeness use the alignment macros in linux-user and bsd-user
instead of manually doing an &.  linux-user and bsd-user are not affected
by the Xen issue, however.

Reviewed-by: Juan Quintela <quintela@redhat.com>
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Fixes: 4ed023ce2a
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-02 13:12:30 +01:00
Thomas Huth e9d49d518d linux-user/syscall: Replace g_malloc0 + memcpy with g_memdup
No need to use g_malloc0 to zero the memory if we memcpy to
the whole buffer afterwards anyway. Actually, there is even
a function which combines both steps, g_memdup, so let's use
this function here instead.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-11-06 15:42:38 +03:00
Stefan Weil d1c002b6ae linux-user: Remove type casts to union type
Casting to a union type is a gcc (and clang) extension. Other compilers
might not support it. This is not a problem today, but the type casts
can be removed easily. Smatch now no longer complains like before:

linux-user/syscall.c:3190:18: warning: cast to non-scalar
linux-user/syscall.c:7348:44: warning: cast to non-scalar

Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08 19:46:47 +03:00
Markus Armbruster c78d65e8a7 linux-user: Use g_new() & friends where that makes obvious sense
g_new(T, n) is neater than g_malloc(sizeof(T) * n).  It's also safer,
for two reasons.  One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.

This commit only touches allocations with size arguments of the form
sizeof(T).  Same Coccinelle semantic patch as in commit b45c03f.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08 19:46:47 +03:00
Christopher Covington 4a7428c5a7 s/cpu_get_real_ticks/cpu_get_host_ticks/
This should help clarify the purpose of the function that returns
the host system's CPU cycle count.

Signed-off-by: Christopher Covington <cov@codeaurora.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
ppc portion
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08 19:46:01 +03:00
Richard Henderson a0577d2aa9 target-tilegx: Use TILEGX_EXCP_SIGNAL instead of TILEGX_EXCP_SEGV
Consolidate signal handling under a single exception.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:03:15 +11:00
Chen Gang dd8070d865 target-tilegx: Decode ill pseudo-instructions
Notice raise and bpt, decoding the constants embedded in the
nop addil instruction in the x0 slot.

[rth: Generalize TILEGX_EXCP_OPCODE_ILL to TILEGX_EXCP_SIGNAL.
Drop validation of signal values.]

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Message-Id: <1443243635-4886-1-git-send-email-gang.chen.5i5j@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:03:15 +11:00
Chen Gang bf0f60a61b linux-user/tilegx: Implement tilegx signal features
[rth: Remove the spreg[EX1] handling, as it's irrelevant to user-mode.]

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Message-Id: <1443312618-13641-1-git-send-email-gang.chen.5i5j@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:03:15 +11:00
Chen Gang de2fdd56b1 linux-user/syscall_defs.h: Sync the latest si_code from Linux kernel
They content several new macro members, also contents TARGET_N*.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Message-Id: <1443240605-2924-1-git-send-email-gang.chen.5i5j@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07 20:03:15 +11:00
Paolo Bonzini 86abac06c1 linux-user: assert that target_mprotect cannot fail
All error conditions that target_mprotect checks are also checked
by target_mmap.  EACCESS cannot happen because we are just removing
PROT_WRITE.  ENOMEM should not happen because we are modifying a
whole VMA (and we have bigger problems anyway if it happens).

Fixes a Coverity false positive, where Coverity complains about
target_mprotect's return value being passed to tb_invalidate_phys_range.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-10-01 11:43:42 +03:00
Chen Gang d0924a26d8 linux-user/signal.c: Use setup_rt_frame() instead of setup_frame() for target openrisc
qemu has already considered about some targets may have no traditional
signals. And openrisc's setup_frame() is dummy, but it can be supported
by setup_rt_frame().

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-10-01 11:13:55 +03:00
Chen Gang 08703b9f7b linux-user/syscall.c: Add EAGAIN to host_to_target_errno_table for
Under Alpha host, EAGAIN is redefined to 35, so it need be remapped too.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28 16:57:54 +03:00
Laurent Vivier 0f0426f343 linux-user: add name_to_handle_at/open_by_handle_at
This patch allows to run example given by open_by_handle_at(2):

      The following shell session demonstrates the use of these two programs:

           $ echo 'Can you please think about it?' > cecilia.txt
           $ ./t_name_to_handle_at cecilia.txt > fh
           $ ./t_open_by_handle_at < fh
           open_by_handle_at: Operation not permitted
           $ sudo ./t_open_by_handle_at < fh      # Need CAP_SYS_ADMIN
           Read 31 bytes
           $ rm cecilia.txt

       Now  we delete and (quickly) re-create the file so that it has the same
       content and (by chance) the  same  inode.[...]

           $ stat --printf="%i\n" cecilia.txt     # Display inode number
           4072121
           $ rm cecilia.txt
           $ echo 'Can you please think about it?' > cecilia.txt
           $ stat --printf="%i\n" cecilia.txt     # Check inode number
           4072121
           $ sudo ./t_open_by_handle_at < fh
           open_by_handle_at: Stale NFS file handle

See the man page for source code.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28 16:44:46 +03:00
Timothy E Baldwin 93b4eff80a linux-user: Return target error number in do_fork()
Whilst calls to do_fork() are wrapped in get_errno() this does not
translate return values.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28 16:40:12 +03:00
Jonathan Neuschäfer ee1045877a linux-user: fix cmsg conversion in case of multiple headers
Currently, __target_cmsg_nxthdr compares a pointer derived from
target_cmsg against the msg_control field of target_msgh (through
subtraction).  This failed for me when emulating i386 code under x86_64,
because pointers in the host address space and pointers in the guest
address space were not the same.  This patch passes the initial value of
target_cmsg into __target_cmsg_nxthdr.

I found and fixed two more related bugs:
- __target_cmsg_nxthdr now returns the new cmsg pointer instead of the
  old one.
- tgt_space (in host_to_target_cmsg) doesn't count "sizeof (struct
  target_cmsghdr)" twice anymore.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28 16:39:43 +03:00
Stefan Brüns 59baae9a62 linux-user: remove MAX_ARG_PAGES limit
Instead of creating a temporary copy for the whole environment and
the arguments, directly copy everything to the target stack.

For this to work, we have to change the order of stack creation and
copying the arguments.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28 16:29:11 +03:00
Stefan Brüns 84646ee25b linux-user: remove unused image_info members
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28 16:29:01 +03:00
Meador Inge ba02577cad linux-user: Treat --foo options the same as -foo
The system mode binaries provide a similar alias
and it makes common options like --version and --help
work as expected.

Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28 16:13:22 +03:00
Riku Voipio 4d1275c24d linux-user: use EXIT_SUCCESS and EXIT_FAILURE
As suggested by Laurent, use EXIT_SUCCESS and EXIT_FAILURE from
stdlib.h instead of numeric values.

Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28 16:12:16 +03:00
Meador Inge 138940bf08 linux-user: Add proper error messages for bad options
This patch adds better support for diagnosing option
parser errors.  The previous implementation just printed
the usage text and exited when a bad option or argument
was found.  This made it very difficult to determine why
the usage was being displayed and it was doubly confusing
for cases like '--help' (it wasn't clear that --help was
actually an error).

Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28 16:04:20 +03:00
Meador Inge daaf8c8eb7 linux-user: Add -help
This option is already available on the system mode
binaries.  It would be better if long options were
supported (i.e. --help), but this is okay for now.

Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28 16:03:36 +03:00
Meador Inge d03f9c3202 linux-user: Exit 0 when -h is used
Signed-off-by: Meador Inge <meadori@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2015-09-28 16:02:50 +03:00
Peter Crosthwaite 4ecd4d16a0 ppc: Rename ELF_MACHINE to be PPC specific
Rename ELF_MACHINE to be PPC specific. This is used as-is by the
various PPC bootloaders and is locally defined to ELF_MACHINE in linux
user in PPC specific ifdeffery.

This removes another architecture specific definition from the global
namespace (as desired by multi-arch).

Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-ppc@nongnu.org
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25 12:04:44 +02:00
Peter Crosthwaite b597c3f7da arm: Remove ELF_MACHINE from cpu.h
The only generic code relying on this is linux-user. Linux user
already has a lot of #ifdef TARGET_ customisation so instead, define
ELF_ARCH as either EM_ARM or EM_AARCH64 appropriately.

The armv7m bootloader can just pass EM_ARM directly, as that
is architecture specific code. Note that arm_boot already has its own
logic selecting an arm specific elf machine so this makes V7M more
consistent with arm_boot.

This removes another architecture specific definition from the global
namespace.

Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25 12:04:43 +02:00
Peter Crosthwaite d276a604bf linux-user: elfload: Provide default for elf_check_arch
For many arch's this macro is defined as the predicatable behaviour
of checking the argument for eqaulity against ELF_ARCH. Provide a
default define as such, so only archs with special handling (usually
allowing multiple EM values) need to provide a def.

Arches that do any of:

1: provide this def exactly the same way as the new default
        (alpha, x86_64)
2: check against ELF_MACHINE while defining ELF_ARCH == ELF_MACHINE
        (arm, aarch64)
3: check against EM_FOO directly while defining ELF_ARCH == EM_FOO
        (unicore32, sparc32, ppc32, mips, openrisc, sh4, cris, m86k)

have their elf_check_arch removed as the default will provide the
correct behaviour.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25 12:04:43 +02:00
Peter Crosthwaite 75be901cdc linux_user: elfload: Default ELF_MACHINE to ELF_ARCH
In most (but not all) cases, ELF_MACHINE and ELF_ARCH are safely the
same. Default ELF_MACHINE to ELF_ARCH. This makes defining ELF_MACHINE
optional for target-*/cpu.h when they are known to match.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-By: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25 12:04:43 +02:00
Anton Blanchard 6bb9a0a9ef target-ppc: Fix SRR0 when taking unaligned exceptions
We are setting SRR0 to the instruction before the one causing the
unaligned exception. A quick testcase:

. = 0x100
.globl _start
_start:
	/* Cause a 0x600 */
	li	3,0x1
	stwcx.	3,0,3
1:	b	1b

. = 0x600
1:	b	1b

Built into something we can load as a BIOS image:

gcc -mbig -c test.S
ld -EB -Ttext 0x0 -o test test.o
objcopy -O binary test test.bin

Run with:

qemu-system-ppc64 -nographic -bios test.bin

Shows an incorrect SRR0 (points at the li):

SRR0 0000000000000100

With the patch we get the correct SRR0:

SRR0 0000000000000104

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2015-09-20 22:48:39 +02:00
Richard Henderson 0583b23323 target-tilegx: Handle atomic instructions
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-15 07:45:34 -07:00
Richard Henderson 9b9dc7acec target-tilegx: Generate SEGV properly
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-15 07:45:28 -07:00
Chen Gang 704eff6c23 linux-user: Conditionalize syscalls which are not defined in tilegx
Some of architectures (e.g. tilegx), several syscall macros are not
supported, so switch them.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP457D6FC9B2B9BA87AEB22CB9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-15 07:41:35 -07:00
Chen Gang b16189b222 linux-user: Support tilegx architecture in linux-user
Add main working flow feature, system call processing feature, and elf64
tilegx binary loading feature, based on Linux kernel tilegx 64-bit
implementation.

[rth: Moved all of the implementation of atomic instructions to a later patch.]

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP938552D42808AA60634582B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-15 07:41:19 -07:00
Chen Gang 2cb154bc19 linux-user: tilegx: Add architecture related features
They are based on Linux kernel tilegx architecture for 64 bit binary,
and also based on tilegx ABI reference document, and also reference from
other targets implementations.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP2508945F92945BB525605A3B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-15 07:17:51 -07:00
Peter Maydell a2aa09e181 * Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
 * cutils: qemu_strto* wrappers
 * iohandler.c simplification
 * Many other fixes and misc patches.
 
 And some MTTCG work (with Emilio's fixes squashed):
 * Signal-free TCG kick
 * Removing spinlock in favor of QemuMutex
 * User-mode emulation multi-threading fixes/docs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJV8Tk7AAoJEL/70l94x66Ds3QH/3bi0RRR2NtKIXAQrGo5tfuD
 NPMu1K5Hy+/26AC6mEVNRh4kh7dPH5E4NnDGbxet1+osvmpjxAjc2JrxEybhHD0j
 fkpzqynuBN6cA2Gu5GUNoKzxxTmi2RrEYigWDZqCftRXBeO2Hsr1etxJh9UoZw5H
 dgpU3j/n0Q8s08jUJ1o789knZI/ckwL4oXK4u2KhSC7ZTCWhJT7Qr7c0JmiKReaF
 JEYAsKkQhICVKRVmC8NxML8U58O8maBjQ62UN6nQpVaQd0Yo/6cstFTZsRrHMHL3
 7A2Tyg862cMvp+1DOX3Bk02yXA+nxnzLF8kUe0rYo6llqDBDStzqyn1j9R0qeqA=
 =nB06
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.

And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs

# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream: (44 commits)
  cutils: work around platform differences in strto{l,ul,ll,ull}
  cpu-exec: fix lock hierarchy for user-mode emulation
  exec: make mmap_lock/mmap_unlock globally available
  tcg: comment on which functions have to be called with mmap_lock held
  tcg: add memory barriers in page_find_alloc accesses
  remove unused spinlock.
  replace spinlock by QemuMutex.
  cpus: remove tcg_halt_cond and tcg_cpu_thread globals
  cpus: protect work list with work_mutex
  scripts/dump-guest-memory.py: fix after RAMBlock change
  configure: Add support for jemalloc
  add macro file for coccinelle
  configure: factor out adding disas configure
  vhost-scsi: fix wrong vhost-scsi firmware path
  checkpatch: remove tests that are not relevant outside the kernel
  checkpatch: adapt some tests to QEMU
  CODING_STYLE: update mixed declaration rules
  qmp: Add example usage of strto*l() qemu wrapper
  cutils: Add qemu_strtoull() wrapper
  cutils: Add qemu_strtoll() wrapper
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 16:13:16 +01:00
Veres Lajos 67cc32ebfd typofixes - v4
Signed-off-by: Veres Lajos <vlajos@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11 10:45:43 +03:00
Stefan Weil 8cb7675561 linux-user: Fix warnings caused by missing 'static' attribute
Warnings from the Sparse static analysis tool:

linux-user/main.c:40:12: warning:
 symbol 'filename' was not declared. Should it be static?
linux-user/main.c:41:12: warning:
 symbol 'argv0' was not declared. Should it be static?
linux-user/main.c:42:5: warning:
 symbol 'gdbstub_port' was not declared. Should it be static?
linux-user/main.c:43:11: warning:
 symbol 'envlist' was not declared. Should it be static?

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11 10:21:38 +03:00
Daniel P. Berrange 8abae4d31d maint: remove unused include for assert.h
A number of files were including assert.h but not using any
of the functions it provides

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11 10:21:38 +03:00
Daniel P. Berrange b6af097528 maint: remove / fix many doubled words
Many source files have doubled words (eg "the the", "to to",
and so on). Most of these can simply be removed, but a couple
were actual mis-spellings (eg "to to" instead of "to do").
There was even one triple word score "to to to" :-)

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11 10:21:38 +03:00
Paolo Bonzini 8fd19e6cfd exec: make mmap_lock/mmap_unlock globally available
There is some iffy lock hierarchy going on in translate-all.c.  To
fix it, we need to take the mmap_lock in cpu-exec.c.  Make the
functions globally available.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09 15:34:56 +02:00
KONRAD Frederic 677ef6230b replace spinlock by QemuMutex.
spinlock is only used in two cases:
  * cpu-exec.c: to protect TranslationBlock
  * mem_helper.c: for lock helper in target-i386 (which seems broken).

It's a pthread_mutex_t in user-mode, so we can use QemuMutex directly,
with an #ifdef.  The #ifdef will be removed when multithreaded TCG
will need the mutex as well.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-Id: <1439220437-23957-5-git-send-email-fred.konrad@greensocs.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[Merge Emilio G. Cota's patch to remove volatile. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09 15:34:55 +02:00
Emilio G. Cota 7090376369 linux-user: call rcu_(un)register_thread on pthread_(exit|create)
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <1440375847-17603-13-git-send-email-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09 15:34:54 +02:00
Peter Maydell 8012c84ff9 target-arm: Wire up HLT 0xf000 as the A64 semihosting instruction
For the A64 instruction set, the semihosting call instruction
is 'HLT 0xf000'. Wire this up to call do_arm_semihosting()
if semihosting is enabled.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christopher Covington <christopher.covington@linaro.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-10-git-send-email-peter.maydell@linaro.org
2015-09-07 10:39:28 +01:00
Laurent Vivier b76f21a707 linux-user: remove useless macros GUEST_BASE and RESERVED_VA
As we have removed CONFIG_USE_GUEST_BASE, we always use a guest base
and the macros GUEST_BASE and RESERVED_VA become useless: replace
them by their values.

Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440420834-8388-1-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24 11:14:30 -07:00
Laurent Vivier 4cbea59869 linux-user: remove --enable-guest-base/--disable-guest-base
All tcg host architectures now support the guest base and as
there is no real performance lost, it can be always enabled.

Anyway, guest base use can be disabled lively by setting guest
base to 0.

CONFIG_USE_GUEST_BASE is defined as (USE_GUEST_BASE && USER_ONLY),
it should have to be replaced by CONFIG_USER_ONLY in non CONFIG_USER_ONLY
parts, but as some other parts are using !CONFIG_SOFTMMU I have chosen to
use !CONFIG_SOFTMMU instead.

Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440373328-9788-2-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24 11:14:17 -07:00
Andrew Bennett f01a361bfc linux-user: Fix MIPS N64 trap and break instruction bug
For the MIPS N64 ABI when QEMU reads the break/trap instruction so that
it can inspect the break/trap code it reads 8 rather than 4 bytes
which means it finds the code field from the instruction after the
break/trap instruction.  This then causes the break/trap handling
code to fail because it does not understand the code number.

The fix forces QEMU to always read 4 bytes of instruction data rather
than deciding how much to read based on the ABI.

Signed-off-by: Andrew Bennett <andrew.bennett@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-07-15 14:07:25 +01:00
Peter Crosthwaite ea3e984740 cpu-exec: Purge all uses of ENV_GET_CPU()
Remove un-needed usages of ENV_GET_CPU() by converting the APIs to use
CPUState pointers and retrieving the env_ptr as minimally needed.

Scripted conversion for target-* change:

for I in target-*/cpu.h; do
    sed -i \
    's/\(^int cpu_[^_]*_exec(\)[^ ][^ ]* \*s);$/\1CPUState *cpu);/' \
    $I;
done

Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09 15:20:40 +02:00
Peter Crosthwaite f7ec7f7b26 gdbstub: Change gdbserver_fork() to accept cpu instead of env
All callsites to this function navigate the cpu->env_ptr only for the
function to take the env ptr back to the original cpu ptr. Change the
function to just pass in the CPU pointer instead. Removes a core code
usage of ENV_GET_CPU() (in gdbstub.c).

Cc: Riku Voipio <riku.voipio@iki.fi>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09 15:20:40 +02:00