Commit Graph

117 Commits

Author SHA1 Message Date
Peter Maydell e0f3728d81 Makefile: Ensure we don't run Sphinx in parallel for manpages
Sphinx will corrupt its doctree cache if we run two copies
of it in parallel. In commit 6bda415c10 we worked
around this by having separate doctrees for 'html' vs 'manpage'
runs. However now that we have more than one manpage produced
from a single manual we can run into this again when trying
to produce the two manpages.

Use the trick described in 'Atomic Rules in GNU Make'
https://www.cmcrossroads.com/article/atomic-rules-gnu-make
to ensure that we only run the Sphinx manpage builder once
for each manual, even if we're producing several manpages.
This fixes doctree corruption in parallel builds and also
avoids pointlessly running Sphinx more often than we need to.

(In GNU Make 4.3 there is builtin support for this, via
the "&:" syntax, but we can't wait for that to be available
in all the distros we support...)

The generic "one invocation for multiple output files"
machinery is provided as a macro named 'atomic' in rules.mak;
we then wrap this in a more specific macro for defining
the rule and dependencies for the manpages in a Sphinx
manual, to avoid excessive repetition.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200124162606.8787-2-peter.maydell@linaro.org
2020-02-03 10:46:32 +00:00
Paolo Bonzini db5adeaa84 build-sys: clean up flags included in the linker command line
Some of the CFLAGS that are discovered during configure, for example
compiler warnings, are being included on the linker command line because
QEMU_CFLAGS is added to it.  Other flags, such as the -m32, appear twice
because they are included in both QEMU_CFLAGS and LDFLAGS.  All this
leads to confusion with respect to what goes in which Makefile variables
(and we have plenty).

So, introduce QEMU_LDFLAGS for flags discovered by configure, following
the lead of QEMU_CFLAGS, and stop adding to it:

1) options that are already in CFLAGS, for example "-g"

2) duplicate options

At the same time, options that _are_ needed by both compiler and linker
must now be added to both QEMU_CFLAGS and QEMU_LDFLAGS, which is clearer.
This is mostly -fsanitize options.  For now, --extra-cflags has this behavior
(but --extra-cxxflags does not).

Meson will not include CFLAGS on the linker command line, do the same in our
build system as well.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 20:59:17 +01:00
Marc-André Lureau d52c454aad contrib: add vhost-user-gpu
Add a vhost-user gpu backend, based on virtio-gpu/3d device. It is
associated with a vhost-user-gpu device.

Various TODO and nice to have items:
- multi-head support
- crash & resume handling
- accelerated rendering/display that avoids the waiting round trips
- edid support

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-6-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-29 06:30:45 +02:00
Paolo Bonzini e0e312f352 build: switch to Kconfig
The make_device_config.sh script is replaced by minikconf, which
is modified to support the same command line as its predecessor.

The roots of the parsing are default-configs/*.mak, Kconfig.host and
hw/Kconfig.  One difference with make_device_config.sh is that all symbols
have to be defined in a Kconfig file, including those coming from the
configure script.  This is the reason for the Kconfig.host file introduced
in the previous patch. Whenever a file in default-configs/*.mak used
$(...) to refer to a config-host.mak symbol, this is replaced by a
Kconfig dependency; this part must be done already in this patch
for bisectability.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 21:45:53 +01:00
Markus Armbruster 9ab71e5ee5 build: Correct explanation of unnest-vars example
Cc: Fam Zheng <fam@euphon.net>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190213130240.15492-1-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-03-06 11:10:35 +01:00
Paolo Bonzini 9df43317b8 test: replace gtester with a TAP driver
gtester is deprecated by upstream glib (see for example the announcement
at https://blog.gtk.org/2018/07/11/news-from-glib-2-58/) and it does
not support tests that call g_test_skip in some glib stable releases.

glib suggests instead using Automake's TAP support, which gtest itself
supports since version 2.38 (QEMU's minimum requirement is 2.40).
We do not support Automake, but we can use Automake's code to beautify
the TAP output.  I chose to use the Perl copy rather than the shell/awk
one, with some changes so that it can accept TAP through stdin, in order
to reuse Perl's TAP parsing package.  This also avoids duplicating the
parser between tap-driver.pl and tap-merge.pl.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1543513531-1151-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11 15:46:52 +01:00
Alex Bennée 5609c5127d tests/docker/Makefile.include: handle empty TARGET_LIST
If the user doesn't specify a TARGET_LIST they get the current
configuration but with spaces and hilarity ensues. This adds some make
magic to turn the TARGET_LIST back into a comma separated list.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Message-Id: <20180521103504.26432-1-alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
2018-06-04 14:39:18 +08:00
Philippe Mathieu-Daudé 8a99e9a30c configure: Really use local libfdt if the system one is too old
QEMU requires libfdt version >= 1.4.2.
If the host has an older libfdt installed, the configure script will use
a (git cloned) local version.

Example with Debian 8:
    $ dpkg-query --showformat='${Version}\n' --show libfdt-dev
    1.4.0+dfsg-1
    $ ./configure
    [...]
    fdt support       yes          # from git submodule 'dtc'

If this case occurs, the linker will have 2 different libfdt available in
the library search path. The default behavior is to search the system path
first, then the local path.

Even if the configure script noticed the libfdt is too old and clone a more
recent locally, when linking the system library is selected first, and the
link process eventually fails:

      LINK    mips64el-softmmu/qemu-system-mips64el
    ../hw/core/loader-fit.o: In function `load_fit':
    /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:278: undefined reference to `fdt_first_subnode'
    /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:286: undefined reference to `fdt_next_subnode'
    /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:277: undefined reference to `fdt_first_subnode'
    collect2: error: ld returned 1 exit status
    Makefile:201: recipe for target 'qemu-system-mips64el' failed
    make[1]: *** [qemu-system-mips64el] Error 1

QEMU already uses a kludge to enforce local CFLAGS before system ones for
libpixman and libfdt, add a similar kludge for the LDFLAGS to enforce using
the local libfdt.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180415230522.24404-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2018-05-11 14:33:39 +02:00
Michael S. Tsirkin 9edc19c939 make: switch from -I to -iquote
Our rule right now is to use <> for external headers,
"" for internal ones. The idea was to avoid conflicts
between e.g. a system file named <trace.h> and an
internal one by the same name.

Unfortunately we use -I compiler flag so it does not
help: a system file doing #include <trace.h> will
still pick up ours first.

To fix, switch to -iquote which is supported by both
gcc and clang and only affects #include "" directives.

As a side effect, this catches any future uses of
 #include <> for internal headers.

Suggested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-03-23 18:38:55 +03:00
Daniel P. Berrange 8cc357b5a8 Revert "build-sys: silence make by default or V=0"
This reverts commit 42a77f1ce4.

The primary intention of this change was to silence messages
like

  make[1]: '/home/berrange/src/virt/qemu/capstone/libcapstone.a' is up to date.

which we get when calling make recursively with explicit
targets.

The problem is that this change affected every make target,
not merely the targets that triggered these "is up to date"
messages. As a result any targets that were not invoking
commands via "$(call quiet-command ...)" suddenly become
silent. This is particularly bad for "make install" which
now appears todo nothing.

Rather than go through every make rule and try to identify
places where we now need to explicitly print a message to
show work taking place, just revert the change.

To address the original problem of silencing "is up to date"
messages, we simply add --quiet to the SUBDIR_MAKEVARS
variable, so it only affects us on recursive make calls.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20180123164718.12714-2-berrange@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-13 11:44:13 +01:00
Marc-André Lureau 42a77f1ce4 build-sys: silence make by default or V=0
Move generic make flags in MAKEFLAGS (SUBDIR_MAKEFLAGS is more qemu specific).

Use --quiet to silence make 'is up to date' message.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180104160523.22995-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-12 13:22:02 +01:00
Paolo Bonzini d59157ea05 docs: create interop/ subdirectory
This is for the future interoperability & management guide.  It includes
the QAPI docs, including the automatically generated ones, other socket
protocols (vhost-user, VNC), and the qcow2 file format.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-15 11:18:39 +02:00
Bruno Dominguez 11cde1c810 configure: split c and cxx extra flags
There was no possibility to add specific cxx flags using the configure
file. So A new entrance has been created to support it.

Duplication of information in configure and rules.mak. Taking
QEMU_CFLAGS and add them to QEMU_CXXFLAGS, now the value of
QEMU_CXXFLAGS is stored in config-host.mak, so there is no need for
it.

The makefile for libvixl was adding flags for QEMU_CXXFLAGS in
QEMU_CFLAGS because of the addition in rules.mak. That was removed, so
adding them where it should be.

Signed-off-by: Bruno Dominguez <bru.dominguez@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1496754467-20893-1-git-send-email-bru.dominguez@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-06-07 15:29:46 +01:00
Markus Armbruster bd7f974796 qapi: Clean up build of generated documentation
Rename intermediate qemu-qapi.texi to qemu-qmp-qapi.texi to match its
user qemu-qmp-ref.texi, just like qemu-ga-qapi.texi matches
qemu-ga-ref.texi.

Build the intermediate .texi next to the sources and the final output
in docs/ instead of dumping them into the build root.

Fix version.texi dependencies so that only the targets that actually
need it depend on it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1489582656-31133-8-git-send-email-armbru@redhat.com>
2017-03-16 07:13:02 +01:00
Daniel P. Berrange ac7568bd3f rules: don't try to create missing include dirs
In

  commit ba78db44f6
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Wed Jan 25 16:14:10 2017 +0000

  make: move top level dir to end of include search path

The dir $(BUILD_DIR)/$(@D) was added to the include
path. This would sometimes point to a non-existant
directory, if the sub-dir in question did not contain
any target-independant files (eg tcg/). To deal with
this the rules.mak attempted to create the directory.

While this was succesful, it also caused accidental
creation of files in the parent of the build dir.
e.g. when building common source files into target
specific output files.

Rather than trying to workaround this, just revert
the code that attempted to mkdir the missing include
directories. Instead just turn off the compiler warning
in question as the missing dir is expected & harmless
in general.

NB: you can clean up a build directory parent that has
been filled with empty directories by commit ba78db44f6
using this GNU find command in that parent directory:
  find audio backends block chardev crypto disas fsdev hw io linux-user \
    migration nbd net qapi qom replay slirp target ui util \
    -type d -empty -delete

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Tested-by: Alberto Garcia <berto@igalia.com>
[PMM: added note about how to clean up a polluted directory]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-07 11:52:34 +00:00
Daniel P. Berrange ba78db44f6 make: move top level dir to end of include search path
Currently the search path is

  1. source dir corresponding to input file (implicit by compiler)
  2. top level build dir
  3. top level source dir
  4. top level source include/ dir
  5. source dir corresponding to input file
  6. build dir corresponding to output file

Search item 5 is an effective no-op, since it duplicates item 1.
When srcdir == builddir, item 6 also duplicates item 1, which
causes a semantic difference between VPATH and non-VPATH builds.

Thus to ensure consistent semantics we need item 6 to be present
immediately after item 1. e.g.

  1. source dir corresponding to input file (implicit by compiler)
  2. build dir corresponding to output file
  3. top level build dir
  4. top level source dir
  5. top level source include/ dir

When srcdir == builddir, items 1 & 2 collapse into one, and items
3 & 4 collapse into one, but the overall search order is still
consistent with srcdir != builddir

A further complication is that while most of the source files
are built with a current directory of $BUILD_DIR, target dependant
files are built with a current directory of $BUILD_DIR/$TARGET.

As a result, search item 2 resolves to a different location for
target independant vs target dependant files. For example when
building 'migration/ram.o', the use of '-I$(@D)' (which expands
to '-Imigration') would not find '$BUILD_DIR/migration', but
rather '$BUILD_DIR/$TARGET/migration'.

If there are generated headers files to be used by the migration
code in '$BUILD_DIR/migration', these will not be found by the
relative include, an absolute include is needed instead. This
has not been a problem so far, since nothing has been generating
headers in sub-dirs, but the trace code will shortly be doing
that. So it is needed to list '-I$(BUILD_DIR)/$(@D)' as well as
'-I$(@D)' to ensure both directories are searched when building
target dependant code. So the search order ends up being:

  1. source dir corresponding to input file (implicit by compiler)
  2. build dir corresponding to output file (absolute)
  3. build dir corresponding to output file (relative to cwd)
  4. top level build dir
  5. top level source dir
  6. top level source include/ dir

One final complication is that the absolute '-I$(BUILD_DIR)/$(@D)'
will sometimes end up pointing to a non-existant directory if
that sub-dir does not have any target-independant files to be
built. Rather than try to dynamically filter this, a simple
'mkdir' ensures $(BUILD_DIR)/$(@D) is guaranteed to exist at
all times.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170125161417.31949-2-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-31 17:11:17 +00:00
Marc-André Lureau 56e8bdd46a build-sys: add qapi doc generation targets
Generate and install the man, txt and html versions of QAPI
documentation (generate and install qemu-doc.txt too).

Add it also to optional pdf/info targets.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170113144135.5150-22-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-01-16 10:11:43 +01:00
Marc-André Lureau 76480423a8 build-sys: use a generic TEXI2MAN rule
The recipe for making a man page from .texi is duplicated several
times over.  Capture it in suitable pattern rules instead.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170113144135.5150-20-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-01-16 10:11:43 +01:00
Paolo Bonzini a273f4cedf rules.mak: add more rules to avoid chaining
Really rule chaining is not a particularly expensive task, since
GNU Make caches the directory listing.  However it is easy to
avoid it for most files and for phony targets (one was missing).

After this patch, only "Makefile", "scripts/hxtool" and
"scripts/create_config" attempt to use chained rules.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-22 16:00:24 +01:00
Paolo Bonzini 5ffb350541 rules.mak: speedup save-vars load-vars
Unnesting variables spends a lot of time parsing and executing foreach
and if functions.  Because actually very few variables have to be
saved and restored, a good strategy is to remember what has to be done
in load-vars, and only iterate the right variables in load-vars.
For save-vars, unroll the foreach loop to provide another small
improvement.

This speeds up a "noop" build from around 15.5 seconds on my laptop
to 11.7 (25% roughly).

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-12-22 16:00:23 +01:00
Paolo Bonzini 7ecf44a579 rules.mak: Also try -r to build modules
Building qemu fails in distributions where gcc enables PIE by default
(e.g. Debian unstable) with:

/usr/bin/ld: -r and -pie may not be used together

You have to use -r instead of -Wl,-r to avoid gcc passing -pie to the linker
when PIE is enabled and a relocatable object is passed.  However, clang
does not know about -r, so try -Wl,-r first.

[This is a fix for commit c96f0ee6a6
("rules.mak: Use -r instead of -Wl, -r to fix building when PIE is
default") which mostly worked but broke the ./configure --enable-modules
build with clang.
--Stefan]

Reported-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161129153720.29747-1-pbonzini@redhat.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-29 16:21:05 +00:00
Adrian Bunk c96f0ee6a6 rules.mak: Use -r instead of -Wl, -r to fix building when PIE is default
Building qemu fails in distributions where gcc enables PIE by default
(e.g. Debian unstable) with:

/usr/bin/ld: -r and -pie may not be used together

Use -r instead of -Wl,-r to avoid gcc passing -pie to the linker
when PIE is enabled and a relocatable object is passed.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Message-Id: <20161127162817.15144-1-bunk@stusta.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-28 16:45:12 +01:00
Marc-André Lureau 88071589e8 build-sys: fix find-in-path
Fix spelling, the GNU make text functions is not called "find-string"
but "findstring".

Broken in commit 2b2e59e.  Fairly harmless: its only use is in
tests/tcg/Makefile, where the bug can cause the I386_TESTS not to
run when they should.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-08 11:25:29 +03:00
Peter Maydell 0bdb12c7c5 rules.mak: quiet-command: Split command name and args to print
The quiet-command make rule currently takes two arguments:
the command and arguments to run, and a string to print if
the V flag is not set (ie we are not being verbose).
By convention, the string printed is of the form
"  NAME   some args". Unfortunately to get nicely lined up
output all the strings have to agree about what column the
arguments should start in, which means that if we add a
new quiet-command usage which wants a slightly longer CMD
name then we either put up with misalignment or change
every quiet-command string.

Split the quiet-mode string into two, the "NAME" and
the "same args" part, and use printf(1) to format the
string automatically. This means we only need to change
one place if we want to support a longer maximum name.

In particular, we can now print 7-character names lined
up properly (they are needed for the OSX "SETTOOL" invocation).

Change all the uses of quiet-command to the new syntax.
(Any which are missed or inadvertently reintroduced
via later merges will result in slightly misformatted
quiet output rather than disaster.)

A few places in the pc-bios/ makefiles are updated to use
"BUILD", "SIGN" and "STRIP" rather than "Building",
"Signing" and "Stripping" for consistency and to keep them
below 7 characters. Module .mo links now print "LD" rather
than the nonstandard "LD -r".

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
2016-10-06 12:11:51 +01:00
Fam Zheng 5b1b6dbd94 rules.mak: Don't extract libs from .mo-libs in link command
For module build, .mo objects are passed to LINK and consumed in
process-archive-undefs. The reason behind that is documented in the
comment above process-archive-undefs.

Similarly, extract-libs should be called with .mo filtered out too.
Otherwise, the .mo-libs are added to the link command incorrectly,
spoiling the purpose of modularization.

Currently we don't have any .mo-libs usage, but it will be used soon
when we modularize more multi-source objects, like sdl and gtk.

Reported-by: Colin Lord <clord@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1469600777-30413-2-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13 19:08:44 +02:00
Michael Mueller dced7eec3c s390x/cpumodel: generate CPU feature lists for CPU models
This patch introduces the helper "gen-features" which allows to generate
feature list definitions at compile time. Its flexibility is better and the
error-proneness is lower when compared to static programming time added
statements.

The helper includes "target-s390x/cpu_features.h" to be able to use named
facility bits instead of numbers. The generated defines will be used for
the definition of CPU models.

We generate feature lists for each HW generation and GA for EC models. BC
models are always based on a EC version and have no separate definitions.

Base features: Features we expect to be always available in sane setups.
Migration safe - will never change. Can be seen as "minimum features
required for a CPU model".

Default features: Features we expect to be stable and around in latest
setups (e.g. having KVM support) - not migration safe.

Max features: All supported features that are theoretically allowed for a
CPU model. Exceeding these features could otherwise produce problems with
IBC (instruction blocking controls) in KVM.

Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
[generate base, default and models. renaming and cleanup]
Message-Id: <20160905085244.99980-6-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06 17:06:49 +02:00
Paolo Bonzini 036999e93e optionrom: fix detection of -Wa,-32
The cc-option macro runs $(CC) in -S mode (generate assembly) to avoid a
pointless run of the assembler.  However, this does not work when you want
to detect support for cc->as option passthrough.  clang ignores -Wa unless
-c is provided, and exits successfully even if the -Wa,-32 option is not
supported.

Reported-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1469043409-14033-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-29 13:56:52 +01:00
Richard Henderson cdbd727c20 build: Use $(AS) for optionrom explicitly
For clang before 3.5, -fno-integrated-as does not exist,
so the workaround in 5f6f0e27fb fails to build.

Use clang's default assembler for linux-user/safe-syscall.S,
and explicitly change to use the system assembler for the
option roms.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-07-10 10:05:46 -07:00
Richard Henderson 5f6f0e27fb build: Use $(CCAS) for compiling .S files
We fail to pass to $(AS) all of the different flags that may be required
for a given set of CFLAGS.  Rather than figuring out the host-specific
mapping, it's better to allow the compiler driver to do that.

However, simply using $(CC) runs afoul of clang trying to build the
option roms.  C.f. 3dd46c7852, wherein we changed from
using $(CC) to using $(AS) in the first place.

Work around this by passing -fno-integrated-as to clang, so that we use
the external assembler, and the clang driver still passes along all of
the options that the assembler might require.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1466703558-7723-1-git-send-email-rth@twiddle.net>
2016-07-05 20:50:11 -07:00
Peter Maydell c503a85599 * max-ram-below-4g improvement (Gerd)
* escc fix (xiaoqiang)
 * ESP fix (Prasad)
 * scsi-disk tweaks/fix (me)
 * Makefile dependency fixes (me)
 * PKGVERSION improvement (Fam)
 * -vnc man improvement (Robert)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJXVv8OAAoJEL/70l94x66DghsH/0PPdBRPsYiZcCuh6VRZnSRc
 mEPwmIOjpVzBeqwIafX+nd3EbYQpNk5arVKQ4SBSyPRdRjpiawzC7UVAwO1M+1xT
 fyVcbzIgkfxwPyV+NP+CIojELowUFydlVksAPmAmBmqslTxzmkepB2cqO7sYdG4o
 QEt2cRWZwQ4QlbCFin3EV79Y59Fe4aF1TfYD0HjRSaATaRTAR+bXydpv2BFVLlV8
 QBw24QsPR3sQl+j7ywPti7WI+ULvR3ONokDv2/hzpxsKQsTieE5pUsSUn6TAOG0u
 a1Evcag3GCcYA5mRT5SKp5rrQRivLyFEEUbV2LeheoIXtEEI22NBPi6l8g+sy/M=
 =dVRp
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* max-ram-below-4g improvement (Gerd)
* escc fix (xiaoqiang)
* ESP fix (Prasad)
* scsi-disk tweaks/fix (me)
* Makefile dependency fixes (me)
* PKGVERSION improvement (Fam)
* -vnc man improvement (Robert)

# gpg: Signature made Tue 07 Jun 2016 18:06:22 BST
# gpg:                using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream:
  vnc: list the 'to' parameter of '-vnc' in the qemu man page
  scsi-disk: add missing break
  Makefile: Derive "PKGVERSION" from "git describe" by default
  Makefile: add dependency on scripts/hxtool
  Makefile: add dependency on scripts/make_device_config.sh
  Makefile: add dependency on scripts/create_config
  Makefile: Add a "FORCE" target
  scsi: megasas: null terminate bios version buffer
  scsi: mark TYPE_SCSI_DISK_BASE as abstract
  scsi: esp: check TI buffer index before read/write
  hw/char: QOM'ify escc.c (fix)
  pc: allow raising low memory via max-ram-below-4g option
  tests: Rename tests/Makefile to tests/Makefile.include

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-08 14:45:28 +01:00
James Clarke 6969ec6cfd Fix linking relocatable objects on Sparc
On Sparc, gcc implicitly passes --relax to the linker, but -r is
incompatible with this. Therefore, if --no-relax is supported, it should
be passed to the linker.

Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-06-07 18:19:06 +03:00
Paolo Bonzini 553350156d Makefile: add dependency on scripts/create_config
Make sure that config-host.h and config-target.h are rebuilt whenever
there is a change in the scripts that generates them; add the dependency
to the pattern rule as suggested by Peter.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-07 14:14:30 +02:00
Fam Zheng 2f4e4dc237 rules.mak: Add "COMMA" constant
Using "," literal in $(call quiet-command, ...) arguments is awkward.
Add this constant to make it at least doable.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1464755128-32490-3-git-send-email-famz@redhat.com
2016-06-01 17:25:50 +08:00
Michael S. Tsirkin cefa2bbd6a rules: filter out irrelevant files
It's often handy to make executables depend on each other, e.g. make a
test depend on a helper. This doesn't work now, as linker
will attempt to use the helper as an object.
To fix, filter only relevant file types before linking an executable.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-17 16:59:36 +02:00
Michael Tokarev e999ee4434 remove libtool support
Libtool support was needed to build shared library for libcacard.
Now there's no need to use libtool, and since the build system is
already complicated enough, we have a way to slightly de-complicate
it.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
2016-02-11 15:15:46 +03:00
Victor Kaplansky 27fa747980 make: load only required dependency files.
The old rules.mak loads dependency .d files using include directive
with file glob pattern "*.d". This breaks the build when build tree has
left-over *.d files from another build.

This patch fixes this by
  - loading precise list of .d files made from *.o and *.mo.
  - specifying explicit list of required dependency info files for
     *.hex autogenerated sources.

Note that Makefile still includes some .d in root directory by including
"*.d".

Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13 14:08:25 +03:00
Victor Kaplansky 998b7b1db4 make: fix where dependency *.d are stored.
In rules like "bar/%.o: %.c" there is a difference between $(*D) and
$(@D). $(*D) expands to '.', while $(@D) expands to 'bar'.  It is
cleaner to generate *.d in the same directory where appropriate *.o
resides. This allows precise including of dependency info from .d files.

As a hack, we also touch two sources for generated *.hex files.  Without
this hack, anyone doing "git pull; make" will not get *.hex rebuilt
correctly since the dependency file would be missing.

Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13 14:08:24 +03:00
Fam Zheng d24697e182 rules.mak: Force CFLAGS for all objects in DSO
Because of the trick of process-archive-undefs, all .mo objects, even
with --enable-modules, are dependencies of executables.

This breaks CFLAGS propogation because the compiling of module object
will happen too early before building for DSO.

With GCC 5, the linking would fail because .o doesn't have -fPIC. Also,
BUILD_DSO will be missed. (module-common.o will have it, so the stamp
symbol was still liked in .so).

Fix the problem by forcing the CFLAGS on individual .o-cflags during
unnest-vars.

Reported-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Fam Zheng <famz@redhat.com>
Cc: qemu-stable@nongnu.org # 2.3
Message-Id: <1430981715-31465-1-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-05-08 14:45:11 +02:00
Fam Zheng c88f68ec3c rules.mak: Fix module build
Module build is broken since commit c261d774fb ( rules.mak: Fix DSO
build by pulling in archive symbols). That commit added .mo placeholders
of DSO to -y variables, in order to pull stub symbols to executable. But
the placeholders are unintentionally expanded in -y, rather than
filtered out while linking.

Fix it by moving the -objs expanding to before inserting .mo
placeholders.  Note that passing -cflags and -libs to member objects are
also moved to keep it happening before object expanding.

Reported-by: Bharata B Rao <bharata.rao@gmail.com>
Tested-by: Bharata B Rao <bharata.rao@gmail.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-14 10:38:57 +01:00
Fam Zheng 2d38853239 rules.mak: Allow .mo-objs and .mo-cflags in -y variables
Expand %.mo-objs in -y nested objects, so that we can write combined
object -cflags rules like what will be done in the coming patch.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-10-31 11:26:25 +01:00
Stefan Weil 4852ee95f3 Fix cross compilation (nm command)
Commit c261d774fb added one more binutils
tool: nm also needs a cross prefix.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1411070108-8954-1-git-send-email-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-19 17:20:11 +01:00
Fam Zheng c261d774fb rules.mak: Fix DSO build by pulling in archive symbols
This fixes an issue with module build system. block/iscsi.so is
currently broken:

    $ ~/build/last/qemu-img
    Failed to open module: /home/fam/build/master/block-iscsi.so:
    undefined symbol: qmp_query_uuid
    qemu-img: Not enough arguments
    Try 'qemu-img --help' for more information

To fix this, we should (at least) let qemu-img link qmp_query_uuid from
libqemustub.a. (There are a few other symbols missing, as well.)

This patch changes the linking rules to:

1) Build ".mo" with "ld -r -o $@ $^" for each ".so", and later build .so
   with it.

2) Always build all the .mo before linking the executables. This is
   achieved by adding those .mo files to the executables' "-y"
   variables.

3) When linking an executable, those .mo files in its "-y" variables are
   filtered out, and replaced by one or more -Wl,-u,$symbol flags. This
   is done in the added macro "process-archive-undefs".

   These "-Wl,-u,$symbol" flags will force ld to pull in the function
   definition from the archives when linking.

   Note that the .mo objects, that are actually meant to be linked in
   the executables, are already expanded in unnest-vars, before the
   linking command. So we are safe to simply filter out .mo for the
   purpose of pulling undefined symbols.

   process-archive-undefs works as this: For each ".mo", find all the
   undefined symbols in it, filter ones that are defined in the
   archives. For each of these symbols, generate a "-Wl,-u,$symbol" in
   the link command, and put them before archive names in the command
   line.

Suggested-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-09 13:13:05 +02:00
Michael Tokarev 0d65942611 build-sys: introduce install-prog macro to install&strip binaries and use it
Use common rule (macro) to install and strip binaries, and use
it in all places where we install binaries, instead of fixing
bugs like 1319493 in every place.
(This fixes https://bugs.launchpad.net/bugs/1319493)

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-24 20:01:24 +04:00
Paolo Bonzini f27701510c rules.mak: remove $(sort) from extract-libs
Duplicate removal was added to extract-libs in order to avoid including
the same library multiple times into the linking command line; this could
potentially happen when using "foo.mo-libs" (which adds the library to
all components, causing it to appear N times if the module is composed
of N objects).  However, sorting and removing duplicates causes problems
with static linking, and also with space-separated linker options as
found in some Mac OS X packaging systems.  Furthermore, the "optimization"
is really a non-problem since we do not expect .mo modules to be composed
of many files.

Reported-by: Sean Bruno <sbruno@ignoranthack.me>
Tested-by: Sean Bruno <sbruno@ignoranthack.me>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1402929805-16836-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-16 16:01:50 +01:00
Fam Zheng 1c33ac5716 rules.mak: Rewrite unnest-vars
The macro unnest-vars is the most important, complicated but hard to
track magic in QEMU's build system.

Rewrite it in a (hopefully) clearer way, with more comments, to make it
easier to understand and maintain.

Remove DSO_CFLAGS and module-objs-m that are not used.

A bonus fix of this version is, per object variables are properly
protected in save-objs and load-objs, before including sub-dir
Makefile.objs, just as nested variables are. So the occasional same
object name from different directory levels won't step on each other's
foot.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-10 13:59:02 +02:00
Paolo Bonzini 2a8e6c7a85 build: simplify and fix fix-obj-vars
fix-obj-vars has the undesired side effect of breaking -cflags
-objs and -libs variables in the toplevel Makefile.objs.  The
variables in the toplevel Makefile.objs do not need any fix,
so fix-obj-vars need not do anything.

Since we are touching it, remove the now unnecessary $(if)
in the callers.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-09 22:59:40 +02:00
Paolo Bonzini 0db564eee2 build: add support for per-object -cflags and -libs to all rules
This is needed in order to use per-object flags variables.

Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-08 15:27:49 +02:00
Paolo Bonzini 5a8b231e7e build: Fix per-object variables for Makefile.target
The compiling is done in a subdir, so the extraction of per-object libs
and cflags are referencing objects with ../ prefixed. So prefix the
per-object variables "foo.o-cflags" and "foo.o-libs" to
"../foo.o-cflags" and "../foo.o-libs".

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-08 15:09:04 +02:00
Fam Zheng 6295b98d7b rules.mak: Fix per object libs extraction
Don't sort the extracted options, sort the objects.

Reported-by: Christian Mahnke <cmahnke@googlemail.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-17 13:21:11 +01:00
Fam Zheng e26110cfc6 module: implement module loading
This patch adds loading, stamp checking and initialization of modules.

The init function of dynamic module is no longer directly called as
__attribute__((constructor)) in static linked version, it is called
only after passed the checking of presense of stamp symbol:

    qemu_stamp_$RELEASEHASH

where $RELEASEHASH is generated by hashing version strings and content
of configure script.

With this, modules built from a different tree/version/configure will
not be loaded.

The module loading code requires gmodule-2.0.

Modules are searched under
 - CONFIG_MODDIR
 - executable folder (to allow running qemu-{img,io} in the build
   directory)
 - ../ of executable folder (to allow running system emulator in the
   build directory)

Modules are linked under their subdir respectively, then copied to top
level of build directory for above convinience, e.g.:
    $(BUILD_DIR)/block/curl.so -> $(BUILD_DIR)/block-curl.so

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-20 13:14:18 +01:00