When qauthz_list_file_load() rejects JSON values other than JSON
object with a rather confusing error message:
$ echo 1 | qemu-system-x86_64 -nodefaults -S -display none -object authz-list-file,id=authz0,filename=/dev/stdin
qemu-system-x86_64: -object authz-list-file,id=authz0,filename=/dev/stdin: Invalid parameter type for 'obj', expected: dict
Improve to
qemu-system-x86_64: -object authz-list-file,id=authz0,filename=/dev/stdin: File '/dev/stdin' must contain a JSON object
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
qauthz_list_file_complete() is wrong that way: it passes @errp to
qauthz_list_file_complete() without checking for failure. If it runs
into another failure, it trips error_setv()'s assertion. Reproducer:
$ qemu-system-x86_64 -nodefaults -S -display none -object authz-list-file,id=authz0,filename=
qemu-system-x86_64: ../util/error.c:59: error_setv: Assertion `*errp == NULL' failed.
Aborted (core dumped)
Fix it to check for failure.
Fixes: 55d869846d
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This series was largely built on the assumption that IPI numbers are
numerically equal to vCPU ids. Even if this happens to be the case
in practice with the default machine settings, this ceases to be true
if VSMT is set to a different value than the number of vCPUs per core.
This causes bogus IPI numbers to be created in KVM from a guest stand
point. This leads to unknow results in the guest, including crashes
or missing vCPUs (see BugLink) and even non-fatal oopses in current
KVM that lacks a check before accessing misconfigured HW (see [1]).
A tentative patch was sent (see [2]) but it seems too complex to be
merged in an RC. Since the original changes are essentially an
optimization, it seems safer to revert them for now. The damage is
done by commit acbdb9956f ("spapr/xive: Allocate IPIs independently
from the other sources") but the previous patches in the series are
really preparatory patches. So this reverts the whole series:
eab0a2d06e ("spapr/xive: Allocate vCPU IPIs from the vCPU contexts")
acbdb9956f ("spapr/xive: Allocate IPIs independently from the other sources")
fa94447a2c ("spapr/xive: Use kvmppc_xive_source_reset() in post_load")
235d3b1162 ("spapr/xive: Modify kvm_cpu_is_enabled() interface")
[1] https://marc.info/?l=kvm-ppc&m=160458409722959&w=4
[2] https://lists.gnu.org/archive/html/qemu-devel/2020-11/msg03626.html
Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Fixes: acbdb9956f ("spapr/xive: Allocate IPIs independently from the other sources")
BugLink: https://bugs.launchpad.net/qemu/+bug/1900241
Signed-off-by: Greg Kurz <groug@kaod.org>
Acked-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <160554086275.1325084.12110142252189044646.stgit@bahia.lan>
Since commits 0979ed017f ("meson: rename .inc.h files to .h.inc")
and 139c1837db ("meson: rename included C source files to .c.inc")
'git-diff --function-context' stopped displaying C function context
correctly.
We can help git-diff by providing attributes to the .[ch].inc path
names. See:
https://git-scm.com/docs/gitattributes#_generating_diff_text
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201014082209.3712625-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Requested Privilege Level field is 2 bits, the Table Indicator field
is 1 bit and the Index field is the remaining 15 bits, with TI=0 meaning
GDT and TI=1 meaning LDT.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Message-Id: <20201116200414.28286-1-jrtc27@jrtc27.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes regression on curses detection in msys2
by commit#925a40df2828d32d3aaaf022282cba81082fb263
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20201116213106.589-1-luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The QGA MSI target requires several macros which are only available
without --disable-guest-agent-msi.
Don't define that target if configure was called with --disable-guest-agent-msi.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20201117201834.408892-1-sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix also a similar typo in a code comment.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20201117193448.393472-1-sw@weilnetz.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
`make installer` with a DLL directory was broken.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20201117190640.390359-1-sw@weilnetz.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- quorum: Fix crash with rewrite-corrupted and without read-write user
- io_uring: do not use pointer after free
- file-posix: Use fallback path for -EBUSY from FALLOC_FL_PUNCH_HOLE
- iotests: Fix failure on Python 3.9 due to use of a deprecated function
- char-stdio: Fix QMP default for 'signal'
-----BEGIN PGP SIGNATURE-----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=0pFF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Patches for 5.2.0-rc2:
- quorum: Fix crash with rewrite-corrupted and without read-write user
- io_uring: do not use pointer after free
- file-posix: Use fallback path for -EBUSY from FALLOC_FL_PUNCH_HOLE
- iotests: Fix failure on Python 3.9 due to use of a deprecated function
- char-stdio: Fix QMP default for 'signal'
# gpg: Signature made Tue 17 Nov 2020 11:43:17 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
iotests/081: Test rewrite-corrupted without WRITE
iotests/081: Filter image format after testdir
quorum: Require WRITE perm with rewrite-corrupted
io_uring: do not use pointer after free
file-posix: allow -EBUSY errors during write zeros on raw block devices
iotests: Replace deprecated ConfigParser.readfp()
char-stdio: Fix QMP default for 'signal'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In qobject_type(), NULL is returned when the 'QObject' returned from parse_value() is not of QString type,
and this 'QObject' memory will leaked.
So we need to first cache the 'QObject' returned from parse_value(), and finally
free 'QObject' memory at the end of the function.
Also, we add a testcast about invalid dict key.
The memleak stack is as follows:
Direct leak of 32 byte(s) in 1 object(s) allocated from:
#0 0xfffe4b3c34fb in __interceptor_malloc (/lib64/libasan.so.4+0xd34fb)
#1 0xfffe4ae48aa3 in g_malloc (/lib64/libglib-2.0.so.0+0x58aa3)
#2 0xaaab3557d9f7 in qnum_from_int qemu/qobject/qnum.c:25
#3 0xaaab35584d23 in parse_literal qemu/qobject/json-parser.c:511
#4 0xaaab35584d23 in parse_value qemu/qobject/json-parser.c:554
#5 0xaaab35583d77 in parse_pair qemu/qobject/json-parser.c:270
#6 0xaaab355845db in parse_object qemu/qobject/json-parser.c:327
#7 0xaaab355845db in parse_value qemu/qobject/json-parser.c:546
#8 0xaaab35585b1b in json_parser_parse qemu/qobject/json-parser.c:580
#9 0xaaab35583703 in json_message_process_token qemu/qobject/json-streamer.c:92
#10 0xaaab355ddccf in json_lexer_feed_char qemu/qobject/json-lexer.c:313
#11 0xaaab355de0eb in json_lexer_feed qemu/qobject/json-lexer.c:350
#12 0xaaab354aff67 in tcp_chr_read qemu/chardev/char-socket.c:525
#13 0xfffe4ae429db in g_main_context_dispatch (/lib64/libglib-2.0.so.0+0x529db)
#14 0xfffe4ae42d8f (/lib64/libglib-2.0.so.0+0x52d8f)
#15 0xfffe4ae430df in g_main_loop_run (/lib64/libglib-2.0.so.0+0x530df)
#16 0xaaab34d70bff in iothread_run qemu/iothread.c:82
#17 0xaaab3559d71b in qemu_thread_start qemu/util/qemu-thread-posix.c:519
Fixes: 532fb53284 ("qapi: Make more of qobject_to()")
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113145525.85151-1-alex.chen@huawei.com>
[Commit message tweaked]
With iproute2-5.8.0, the route, link and addr show commands fail:
root@sid:~# ip addr show
RTNETLINK answers: Unknown error 352321537
Dump terminated
root@sid:~# ip link show
RTNETLINK answers: Unknown error 352321537
Dump terminated
root@sid:~# ip route show
RTNETLINK answers: Unknown error 352321537
Dump terminated
This patch correctly decodes the GETROUTE and GETLINK commands and adds
the RTA_TABLE message.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20201116163622.791442-1-laurent@vivier.eu>
* Update NetBSD VM to version 9.1
* Misc fixes (e.g. categorize some devices)
-----BEGIN PGP SIGNATURE-----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=A3/B
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-11-17' into staging
* Fixes for compiling on Haiku, and add Haiku VM for compile-testing
* Update NetBSD VM to version 9.1
* Misc fixes (e.g. categorize some devices)
# gpg: Signature made Tue 17 Nov 2020 09:20:31 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-11-17:
max111x: put it into the 'misc' category
nand: put it into the 'storage' category
ads7846: put it into the 'input' category
ssd0323: put it into the 'display' category
gitlab-ci: Use $CI_REGISTRY instead of hard-coding registry.gitlab.com
target/microblaze: Fix possible array out of bounds in mmu_write()
tests/vm: update NetBSD to 9.1
tests/vm: Add Haiku test based on their vagrant images
configure: Add a proper check for sys/ioccom.h and use it in tpm_ioctl.h
configure: Do not build pc-bios/optionrom on Haiku
configure: Fix the _BSD_SOURCE define for the Haiku build
qemu/bswap: Remove unused qemu_bswap_len()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The TMP105 datasheet says that in Interrupt Mode (when TM==1) the device
signals an alert when the temperature equals or exceeds the T_high value and
then remains high until a device register is read or the device responds to
the SMBUS Alert Response address, or the device is put into Shutdown Mode.
Thereafter the Alert pin will only be re-signalled when temperature falls
below T_low; alert can then be cleared in the same set of ways, and the
device returns to its initial "alert when temperature goes above T_high"
mode. (If this textual description is confusing, see figure 3 in the
TI datasheet at https://www.ti.com/lit/gpn/tmp105 .)
We were misimplementing this as a simple "always alert if temperature is
above T_high or below T_low" condition, which gives a spurious alert on
startup if using the "T_high = 80 degrees C, T_low = 75 degrees C" reset
limit values.
Implement the correct (hysteresis) behaviour by tracking whether we
are currently looking for the temperature to rise over T_high or
for it to fall below T_low. Our implementation of the comparator
mode (TM==0) wasn't wrong, but rephrase it to match the way that
interrupt mode is now handled for clarity.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20201110150023.25533-3-peter.maydell@linaro.org
The TMP105 datasheet (https://www.ti.com/lit/gpn/tmp105) says that the
power-up reset values for the T_low and T_high registers are 80 degrees C
and 75 degrees C, which are 0x500 and 0x4B0 hex according to table 5. These
values are then shifted right by four bits to give the register reset
values, since both registers store the 12 bits of temperature data in bits
[15..4] of a 16 bit register.
We were resetting these registers to zero, which is problematic for Linux
guests which enable the alert interrupt and then immediately take an
unexpected overtemperature alert because the current temperature is above
freezing...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20201110150023.25533-2-peter.maydell@linaro.org
In commit 76346b6264 we tried to add a configure check that
the libgio pkg-config data was correct, which builds an executable
linked against it. Unfortunately this doesn't catch the problem
(missing static library dependency info), because a "do nothing" test
source file doesn't have any symbol references that cause the linker
to pull in .o files from libgio.a, and so we don't see the "missing
symbols from libmount" error that a full QEMU link triggers.
(The ineffective test went unnoticed because of a typo that
effectively disabled libgio unconditionally, but after commit
3569a5dfc1 fixed that, a static link of the system emulator on
Ubuntu stopped working again.)
Improve the gio test by having the test source fragment reference a
g_dbus function (which is what is indirectly causing us to end up
wanting functions from libmount).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20201116104617.18333-1-peter.maydell@linaro.org
Fix Coverity CID 1435957: Memory - illegal accesses (OVERRUN):
>>> Overrunning array "suffixes" of 7 8-byte elements at element
index 7 (byte offset 63) using index "idx" (which evaluates to 7).
Note, the biggest input value freq_to_str() can accept is UINT64_MAX,
which is ~18.446 EHz, less than 1000 EHz.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20201101215755.2021421-1-f4bug@amsat.org
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch fixes CID 1432800 by removing an unnecessary check.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the mtspr helper we attempt to check for "is the timer disabled"
with "if (env->ttmr & TIMER_NONE)". This is wrong because TIMER_NONE
is zero and the condition is always false (Coverity complains about
the dead code.)
The correct check would be to test whether the TTMR_M field in the
register is equal to TIMER_NONE instead. However, the
cpu_openrisc_timer_update() function checks whether the timer is
enabled (it looks at cpu->env.is_counting, which is set to 0 via
cpu_openrisc_count_stop() when the TTMR_M field is set to
TIMER_NONE), so there's no need to check for "timer disabled" in the
target/openrisc code. Instead, simply remove the dead code.
Fixes: Coverity CID 1005812
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stafford Horne <shorne@gmail.com>
Message-id: 20201103114654.18540-1-peter.maydell@linaro.org
In commit 5edab03d40 we added tracepoints to the ps2 keyboard
and mouse emulation. However we didn't remove all the debug-by-printf
support. In fact there is only one printf() remaining, and it is
redundant with the trace_ps2_write_mouse() event next to it.
Remove the printf() and the now-unused DEBUG* macros.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20201101133258.4240-1-peter.maydell@linaro.org
We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-id: 20201111073651.72804-1-alex.chen@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The removal of the selection of A15MPCORE from ARM_VIRT also
removed what A15MPCORE selects, ARM_GIC. We still need ARM_GIC.
Fixes: bec3c97e0c ("hw/arm/virt: Remove dependency on Cortex-A15 MPCore peripherals")
Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201111143440.112763-1-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test what happens when a rewrite-corrupted quorum node performs such a
rewrite, while there is no parent that has taken the WRITE permission.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201113211718.261671-4-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Otherwise, this breaks whenever the test directory contains the image
format (e.g. "/tmp/test-raw-file" is filtered to "/tmp/test-IMGFMT-file"
instead of "TEST_DIR").
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201113211718.261671-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using rewrite-corrupted means quorum may issue writes to its children
just from receiving read requests from its parents. Thus, it must take
the WRITE permission when rewrite-corrupted is used.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201113211718.261671-2-mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Even though only the pointer value is only printed, it is untidy
and Coverity complains.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201113154102.1460459-1-pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On Linux, fallocate(fd, FALLOC_FL_PUNCH_HOLE) when it is used on a block device,
without O_DIRECT can return -EBUSY if it races with another write to the same page.
Since this is rare and discard is not a critical operation, ignore this error
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201111153913.41840-2-mlevitsk@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iotest 277 fails on Fedora 33 (Python 3.9) because a deprecation warning
changes the output:
nbd-fault-injector.py:230: DeprecationWarning: This method will be
removed in future versions. Use 'parser.read_file()' instead.
In fact, readfp() has already been deprecated in Python 3.2 and the
replacement has existed since the same version, so we can now
unconditionally switch to read_file().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201113100602.15936-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 02c4bdf1 tried to make signal=on the default for stdio chardevs
except for '-serial mon:stdio', but it forgot about QMP and accidentally
switched the QMP default from true (except for -nographic) to false
(always). The documentation was kept unchanged and still describes the
opposite of the old behaviour (which is an even older documentation
bug).
Fix all of this by making signal=true the default in ChardevStdio and
documenting it as such.
Fixes: 02c4bdf1d2
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201023101222.250147-2-kwolf@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Per the SD spec, to indicate a 2 GiB card, BLOCK_LEN shall be 1024
bytes, hence the READ_BL_LEN field in the CSD register shall be 10
instead of 9.
This fixes the acceptance test error for the NetBSD 9.0 test of the
Orange Pi PC that has an expanded SD card image of 2 GiB size.
Fixes: 6d2d4069c4 ("hw/sd: Correct the maximum size of a Standard Capacity SD Memory Card")
Reported-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-Id: <20201025152357.11865-1-bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The category of the max111x device is not set, put it into the 'misc'
category.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201112125824.763182-5-ganqixin@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The category of the nand device is not set, put it into the 'storage'
category.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201112125824.763182-4-ganqixin@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The category of the ads7846 device is not set, put it into the 'input'
category.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201112125824.763182-3-ganqixin@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The category of the ssd0323 device is not set, put it into the 'display'
category.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201112125824.763182-2-ganqixin@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When socket() fails, it returns -1, 0 is the normal return value and should not return error.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: AlexChen <alex.chen@huawei.com>
Message-Id: <5F9A5B48.9030509@huawei.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-Id: <5FA28106.6000901@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Update containers.yml to use the $CI_REGISTRY variable as other files
such as edk2.yml do.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201113172519.31056-1-rebecca@nuviainc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The size of env->mmu.regs is 3, but the range of 'rn' is [0, 5].
To avoid data access out of bounds, only if 'rn' is less than 3, we
can print env->mmu.regs[rn]. In other cases, we can print
env->mmu.regs[MMU_R_TLBX].
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-Id: <5FA10ABA.1080109@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alexander von Gluck IV <kallisti5@unixzen.com>
[PMD: Avoid recreating the image each time]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[thuth: Add ninja package, /usr/bin/env hack and --disable-slirp]
Message-Id: <20201114165137.15379-5-thuth@redhat.com>
Buglink: https://bugs.launchpad.net/qemu/+bug/1715203
Signed-off-by: Thomas Huth <thuth@redhat.com>
On Solaris and Haiku, the _IO() macros are defined in <sys/ioccom.h>.
Add a proper check for this header to our build system, and make sure
to include the header in tpm_ioctl.h to fix a build failure on Solaris
and Haiku.
Message-Id: <20201115152317.42752-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
