Commit Graph

75 Commits

Author SHA1 Message Date
Cornelia Huck 5f8c92e1d5 9pfs: fix dependencies
Nothing in fsdev/ or hw/9pfs/ depends on pci; it should rather depend
on CONFIG_VIRTFS and CONFIG_VIRTIO/CONFIG_XEN only.

Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30 18:23:25 +02:00
Paolo Bonzini 9f57061c35 acpi: filter based on CONFIG_ACPI_X86 rather than TARGET
Copy the mechanism of hw/smbios/smbios-stub.c to implement an ACPI-stub
instead, so that -acpitable can be later extended to ARM.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Paolo Bonzini a0f80010b3 stubs: move vhost stubs to stubs/vhost.o
No need to include them in libqemustub.a, since only system emulators
need them.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Leif Lindholm 1007a37e20 smbios: filter based on CONFIG_SMBIOS rather than TARGET
-smbios command line options were accepted but silently ignored on
TARGET_ARM, due to a test for TARGET_I386 in arch_init.c.

Copy the mechanism of hw/pci/pci-stub.c to implement an smbios-stub
instead, enabled for all targets without CONFIG_SMBIOS.

Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Message-Id: <20161222151828.28292-1-leif.lindholm@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:34 +01:00
Alistair Francis d1f711d407 STM32F2xx: Add the ADC device
Add the STM32F2xx ADC device. This device randomly
generates values on each read.

This also includes creating a hw/adc directory.

Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 3240e660adaf537f55a63ce06096e844aece8cda.1474742262.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04 13:28:07 +01:00
Corey Minyard 23076bb34b Add a base IPMI interface
Add the basic IPMI types and infrastructure to QEMU.  Low-level
interfaces and simulation interfaces will register with this; it's
kind of the go-between to tie them together.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22 18:39:19 +02:00
Wei Huang 60d8f328b8 smbios: move smbios code into a common folder
To share smbios among different architectures, this patch moves SMBIOS
code (smbios.c and smbios.h) from x86 specific folders into new
hw/smbios directories. As a result, CONFIG_SMBIOS=y is defined in
x86 default config files.

Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13 14:08:30 +03:00
Kim Phillips cf7087db10 vfio: move hw/misc/vfio.c to hw/vfio/pci.c Move vfio.h into include/hw/vfio
This is done in preparation for the addition of VFIO platform
device support.

Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-12-19 15:24:06 -07:00
Vasilis Liaskovitis 10b7e74bf2 pc: implement pc-dimm device abstraction
Each hotplug-able memory slot is a PCDIMMDevice.
A hot-add operation for a memory device:
- creates a new PCDIMMDevice and makes hotplug controller to map it into
  guest address space

Hotplug operations are done through normal device_add commands.
For migration case, all hotplugged memory devices on source should be
specified on target's command line using '-device' option with
properties set to the same values as on source.

To simplify review, patch introduces only PCDIMMDevice QOM skeleton that
will be extended by following patches to implement actual memory hotplug
and related functions.

Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19 16:41:47 +03:00
Aneesh Kumar K.V 993c91a0e9 hw/9pfs: Include virtio-9p-device.o in build
After commit ba1183da9a we are including
hw/Makefile.objs directly from Makefile.target. Make sure hw/Makefile.objs
rules doesn't depend on variable defined in Makefile.objs

Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2014-03-04 09:20:49 +05:30
Andreas Färber 1f9c4cfda4 ipack: Move IndustryPack out of hw/char/
Move the header defining an IPackBus and IPackDevice base class into
a new include/ directory and move their implementation and a
PCI-IndustryPack bridge out of hw/char/ directory into a new hw/ipack/.

Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14 21:11:53 +01:00
Andreas Färber d1f2c96a81 pcmcia: QOM'ify PCMCIACardState and MicroDriveState
Turn PCMCIACardState into a device.
Move callbacks to new PCMCIACardClass.

Derive TYPE_MICRODRIVE from TYPE_PCMCIA_CARD.
Replace ide_init2_with_non_qdev_drives().

Signed-off-by: Othmar Pasteka <pasteka@kabsi.at>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-11-05 18:06:52 +01:00
Paolo Bonzini e9cd423fa8 virtio: simplify Makefile conditionals
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-19 16:18:11 +02:00
Paolo Bonzini bdee56f546 tpm: reorganize headers and split hardware part
The TPM subsystem does not have a full front-end/back-end separation.
The sole available backend, tpm_passthrough, depends on the data
structures of the sole available frontend, tpm_tis.

However, we can at least try to split the user interface (tpm.c) from the
implementation (hw/tpm).  The patches makes tpm.c not include tpm_int.h,
which is shared between tpm_tis.c and tpm_passthrough.c; instead it
moves more stuff to tpm_backend.h.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15 18:19:25 +02:00
Paolo Bonzini ba25df88cc hw: move VFIO and ivshmem to hw/misc/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:14 +02:00
Paolo Bonzini c0907c9e64 hw: move PCI bridges to hw/pci-* or hw/ARCH
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:14 +02:00
Paolo Bonzini fc97bb5ba3 hw: move display devices to hw/display/, configure via default-configs/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:13 +02:00
Paolo Bonzini 6e7907468f hw: move virtio devices to hw/ subdirectories
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:12 +02:00
Paolo Bonzini 49ab747f66 hw: move target-independent files to subdirectories
This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:12 +02:00
Paolo Bonzini 1fd6bb44ed hw: make subdirectories for devices
Prepare the new directory structure.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:11 +02:00
Dmitry Fleytman 786fd2b0f8 VMXNET3 device implementation
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25 11:13:10 +01:00
Dmitry Fleytman e263cd49c7 Packet abstraction for VMWARE network devices
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25 11:13:10 +01:00
Peter Crosthwaite 06a1cea5f6 pl330: Initial version
Device model for Primecell PL330 DMA controller.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Tested-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 098aac26233d7334bed2bca4f06f539638ca6d24.1361853677.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-15 16:41:58 +00:00
Paolo Bonzini 530182169e hw: move boards and other isolated files to hw/ARCH
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01 15:01:19 +01:00
Paolo Bonzini 1559e0d4b5 hw: move device-hotplug.o to toplevel, compile it once
The situation with device-hotplug.c is similar to qdev-monitor.c.
Add a stub for pci_drive_hot_add, so that it can be compiled once,
and move it out of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01 13:57:13 +01:00
Paolo Bonzini b4a42f8138 hw: move qdev-monitor.o to toplevel directory
qdev-monitor.c is the only "core qdev" file that is not used in
user-mode emulation, and it does not define anything that is used
by hardware models.  Remove it from the hw/ directory and
remove hw/qdev-monitor.h from hw/qdev.h too; this requires
some files to have some new explicitly includes.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01 13:54:10 +01:00
Paolo Bonzini fd7f0d6617 hw: move fifo.[ch] to libqemuutil
fifo.c is generic code that can be easily unit tested.  So it
belongs in libqemuutil.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01 13:53:10 +01:00
Paolo Bonzini 159b6e9f14 hw: move char backends to backends/
Braille and msmouse support is in hw/, but it is not hardware.
Move it to the backends/ directory.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01 13:18:23 +01:00
Igor Mitsyanko d7dfca0807 hw/sdhci: introduce standard SD host controller
Device model for standard SD Host Controller Interface (SDHCI) compliant with
version 2.00 of SD association specification.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28 18:23:14 +00:00
Gerd Hoffmann 07d17e7720 allow disabling usb smartcard support
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-02-19 12:30:04 +01:00
Paolo Bonzini 82cb6b041c build: remove extra-obj-y
extra-obj-y is somewhat complicated to understand.  Replace it with a
special CONFIG_ALL symbol that is defined only at toplevel.
This limits the case of directories defining more than one
*-obj-y target.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-26 13:15:37 +00:00
Paolo Bonzini 000823449c build: remove universal-obj-y
All of universal-obj-y, user-obj-y (right now unused) and common-obj-y can
be unified into common-obj-y if we take care of defining CONFIG_SOFTMMU
and CONFIG_USER_ONLY in the toplevel makefile.  This is similar to how
we define symbols for hardware components.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-26 13:15:35 +00:00
KONRAD Frederic ff8eca5536 virtio-bus: introduce virtio-bus
Introduce virtio-bus. Refactored transport device will create a bus which
extends virtio-bus.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-21 13:23:12 -06:00
Alberto Garcia be657dea4b Add GE IP-Octal 232 IndustryPack emulation
The GE IP-Octal 232 is an IndustryPack module that implements eight
RS-232 serial ports, each one of which can be redirected to a
character device in the host.

Signed-off-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-14 13:26:12 -06:00
Alberto Garcia 9c16fa79bf Add TEWS TPCI200 IndustryPack emulation
The TPCI200 is a PCI board that supports up to 4 IndustryPack modules.

A new bus type called 'IndustryPack' has been created so any
compatible module can be attached to this board.

Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-14 13:26:12 -06:00
Paolo Bonzini 9444e9e640 build: consolidate multiple variables into universal-obj-y
The directory descent mechanism, and a less-flat tree both helped
in making some *-obj-y definitions very short.  Many of these
often end up in universal-obj-y, and used to be separate only
because of libuser (which is now part of history...).

Consolidate these variables in a single one.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12 18:42:50 +01:00
Paolo Bonzini afd347ab38 build: remove CONFIG_SMARTCARD
The passthru smartcard does not have the shared library dependency, build
it unconditionally.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12 17:19:38 +01:00
Andreas Färber 63e3555e80 Merge branch 'master' of git://git.qemu.org/qemu into prep-up
Conflicts:
	hw/Makefile.objs
	hw/ppc_prep.c

Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2013-01-10 21:52:28 +01:00
Eduardo Habkost 507066f8a9 qdev: Include qdev code into *-user, too
The code depends on some functions from qemu-option.o, so add
qemu-option.o to universal-obj-y to make sure it's included.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-08 21:03:43 +01:00
Stefan Hajnoczi ef4929fb3c dataplane: use linux-headers/ for virtio includes
The hw/dataplane/vring.c code includes linux/virtio_ring.h.  Ensure that
we use linux-headers/ instead of the system-wide headers, which may be
out-of-date on older distros.

This resolves the following build error on Debian 6:

  CC    hw/dataplane/vring.o
cc1: warnings being treated as errors
hw/dataplane/vring.c: In function 'vring_enable_notification':
hw/dataplane/vring.c:71: error: implicit declaration of function 'vring_avail_event'
hw/dataplane/vring.c:71: error: nested extern declaration of 'vring_avail_event'
hw/dataplane/vring.c:71: error: lvalue required as left operand of assignment

Note that we now build dataplane/ for each target instead of only once.
There is no way around this since linux-headers/ is only available for
per-target objects - and it's how virtio, vfio, kvm, and friends are
built.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-03 07:13:25 -06:00
Stefan Hajnoczi 185ecf40e3 dataplane: add host memory mapping code
The data plane thread needs to map guest physical addresses to host
pointers.  Normally this is done with cpu_physical_memory_map() but the
function assumes the global mutex is held.  The data plane thread does
not touch the global mutex and therefore needs a thread-safe memory
mapping mechanism.

Hostmem registers a MemoryListener similar to how vhost collects and
pushes memory region information into the kernel.  There is a
fine-grained lock on the regions list which is held during lookup and
when installing a new regions list.

When the physical memory map changes the MemoryListener callbacks are
invoked.  They build up a new list of memory regions which is finally
installed when the list has been completed.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02 15:50:32 +01:00
Andreas Färber 501a7ce727 Merge branch 'master' of git://git.qemu.org/qemu into qom-cpu
Adapt header include paths.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-23 00:40:49 +01:00
Eduardo Habkost a404b61244 qdev-properties.c: Separate core from the code used only by qemu-system-*
This separates the qdev properties code in two parts:
 - qdev-properties.c, that contains most of the qdev properties code;
 - qdev-properties-system.c for code specific for qemu-system-*,
   containing:
   - Property types: drive, chr, netdev, vlan, that depend on code that
     won't be included on *-user
   - qemu_add_globals(), that depends on qemu-config.o.

This change should help on two things:
 - Allowing DeviceState to be used by *-user without pulling
   dependencies that are specific for qemu-system-*;
 - Writing qdev unit tests without pulling too many dependencies.

The copyright/license of qdev-properties.c isn't explicitly stated at
the file, so add a simple copyright/license header pointing to the
commit ID of the original file.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19 14:09:31 +01:00
Paolo Bonzini 525877c999 build: move rules from Makefile to */Makefile.objs
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:29:06 +01:00
Paolo Bonzini 6f991980a5 Merge commit '1dd3a74d2ee2d873cde0b390b536e45420b3fe05' into HEAD
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-17 18:56:22 +01:00
Michael S. Tsirkin 315a1350c4 pci: move pci core code to hw/pci
Move files and modify makefiles to pick them at the
new location.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-12-17 13:02:17 +02:00
Jason Baron a1c9304683 ich9: Add i82801b11 dmi-to-pci bridge
Add the dmi-to-pci i82801b11 bridge chip. This is the pci bridge chip
that q35 uses on its host bus for PCI bus arbitration.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-26 09:35:37 -06:00
Jason Baron 678e7b94b1 ich9: Add smbus
Add support for the ich9 smbus chip.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-26 09:35:36 -06:00
Jason Baron e516572fde ich9: Add acpi support and definitions
Lay the groundwork for subsequent ich9 support.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-26 09:35:35 -06:00
Isaku Yamahata 410edd922d pc/piix_pci: factor out smram/pam logic
Factor out smram/pam logic for use by other chipsets, namely q35
at this point.

Note: Should be factored out into a generic North Bridge Class.

[jbaron@redhat.com: changes for updated memory API]
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-11-26 09:35:35 -06:00