'node-name' and 'driver' should not be changed during a reopen
operation. It is, however, valid to specify them with the same value as
they already had.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This is doing a more complete test on setting cache modes both while
opening an image (i.e. in a -drive command line) and in reopen
situations. It checks that reopen can specify options for child nodes
and that cache modes are correctly inherited from parent nodes where
they are not specified.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This is a basic test for specifying cache modes for child nodes on the
command line. It doesn't take much time and works without O_DIRECT
support.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Specifying the cache mode for a driver without a medium is not a useful
thing to do: As long as there is no medium, the cache mode doesn't make
a difference, and once the 'change' command is used to insert a medium,
it ignores the old cache mode and makes the new medium use
cache=writethrough.
Later patches will make it an error to specify the cache mode for an
empty drive. Remove the corresponding test case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Creating an empty drive while specifying 'format' doesn't make sense.
The specified format driver would simply be ignored.
Make a set 'format' option an indication that a non-empty drive should
be created. This makes 'format' consistent with 'driver' and allows
using it with a block driver that doesn't need any other options (like
null-co/null-aio).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Don't create two interfaces to the same drive in the recently moved
failure test.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Code motion only, in preparation for adjusting
the setUp procedure for this test.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Split it into an abstract test class and an implementation class.
The split is primarily to facilitate more flexible setUp variations
for other kinds of tests without having to rewrite or shuffle around
all of these helpers.
See the following two patches for more of the "why."
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a QIOChannel subclass that is capable of performing I/O
to/from a memory buffer. This implementation does not attempt
to support concurrent readers & writers. It is designed for
serialized access where by a single thread at a time may write
data, seek and then read data back out.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QIOChannel subclass that is capable of performing I/O
to/from a separate process, via a pair of pipes. The command
can be used for unidirectional or bi-directional I/O.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QIOChannel subclass that can run the TLS protocol over
the top of another QIOChannel instance. The object provides a
simplified API to perform the handshake when starting the TLS
session. The layering of TLS over the underlying channel does
not have to be setup immediately. It is possible to take an
existing QIOChannel that has done some handshake and then swap
in the QIOChannelTLS layer. This allows for use with protocols
which start TLS right away, and those which start plain text
and then negotiate TLS.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a QIOChannel subclass that is capable of operating on things
that are files, such as plain files, pipes, character/block
devices, but notably not sockets.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Implement a QIOChannel subclass that supports sockets I/O.
The implementation is able to manage a single socket file
descriptor, whether a TCP/UNIX listener, TCP/UNIX connection,
or a UDP datagram. It provides APIs which can listen and
connect either asynchronously or synchronously. Since there
is no asynchronous DNS lookup API available, it uses the
QIOTask helper for spawning a background thread to ensure
non-blocking operation.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A number of I/O operations need to be performed asynchronously
to avoid blocking the main loop. The caller of such APIs need
to provide a callback to be invoked on completion/error and
need access to the error, if any. The small QIOTask provides
a simple framework for dealing with such probes. The API
docs inline provide an outline of how this is to be used.
Some functions don't have the ability to run asynchronously
(eg getaddrinfo always blocks), so to facilitate their use,
the task class provides a mechanism to run a blocking
function in a thread, while triggering the completion
callback in the main event loop thread. This easily allows
any synchronous function to be made asynchronous, albeit
at the cost of spawning a thread.
In this series, the QIOTask class will be used for things like
the TLS handshake, the websockets handshake and TCP connect()
progress.
The concept of QIOTask is inspired by the GAsyncResult
interface / GTask class in the GIO libraries. The min
version requirements on glib don't allow those to be
used from QEMU, so QIOTask provides a facsimilie which
can be easily switched to GTask in the future if the
min version is increased.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The aim of these tests is to combine with an appropriate kernel
image (with symbol-file vmlinux) and check it behaves as it should.
Given a kernel it checks:
- single step
- software breakpoint
- hardware breakpoint
- access, read and write watchpoints
On success it returns 0 to the calling process.
I've not plumbed this into the "make check" logic though as we need a
solution for providing non-host binaries to the tests. However the test
is structured to work with pretty much any Linux kernel image as it
uses the basic kernel_init code which is common across architectures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-7-git-send-email-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It should be fairly obvious that qapi base classes need to
form an acyclic graph, since QMP cannot specify the same
key more than once, while base classes are included as flat
members alongside other members added by the child. But the
old check_member_clash() parser function was not prepared to
check for this, and entered an infinite recursion (at least
until Python gives up, complaining about nesting too deep).
Now that check_member_clash() has been recently removed,
attempts at self-inheritance trigger an assertion failure
introduced by commit ac88219a. The obvious fix is to turn
the assertion into a conditional.
This patch includes both the tests (base-cycle-direct and
base-cycle-indirect) and the fix, since the .err file output
for the unfixed case is not useful (particularly when it was
warning about unbounded recursion, as that limit may be
platform-specific).
We don't need to worry about cycles in flat unions (neither
the base type nor the type of a variant can be a union) nor
in alternates (alternate branches cannot themselves be an
alternate). But if we later allow a union type as a variant,
we will still be okay, as QAPISchemaObjectTypeVariants.check()
triggers the same QAPISchemaObjectType.check() that will
detect any loops.
Likewise, we need not worry about the case of diamond
inheritance where the same class is used for a flat union base
class and one of its variants; either both uses will introduce
a collision in trying to insert the same member name twice, or
the shared type is empty and changes nothing.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-16-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
With the recent commit 'qapi: Detect collisions in C member
names', we have two different locations for detecting clashes -
one at parse time, and another at QAPISchema*.check() time.
Remove all of the ad hoc parser checks, and delete associated
code (for example, the global check_member_clash() method is
no longer needed).
Testing this showed that the test union-bad-branch wasn't adding
much: union-clash-branches also exposes the error message when
branches collide, and we've recently fixed things to avoid an
implicit collision with max. Likewise, the error for
enum-clash-member changes to report our new detection of
upper case in a value name, unless we modify the test to use
all lower case.
The wording of several error messages has changed, but the
change is generally an improvement rather than a regression.
No change to generated code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-15-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We document that members of enums and objects should be
'lower-case', although we were not enforcing it. We have to
whitelist a few pre-existing entities that violate the norms.
Add three new tests to expose the new error message, each of
which first uses the whitelisted name 'UuidInfo' to prove the
whitelist works, then triggers the failure (this is the same
pattern used in the existing returns-whitelist.json test).
Note that by adding this check, we have effectively forbidden
an entity with a case-insensitive clash of member names, for
any entity that is not on the whitelist (although there is
still the possibility to clash via '-' vs. '_').
Not done here: a future patch should also add naming convention
support and whitelist exceptions for command, event, and type
names.
The additions to QAPISchemaMember.check_clash() check whether
info['name'] is in the whitelist (the top-most entity name at
the point 'info' tracks), rather than self.owner (the type,
possibly implicit, that directly owns the member), because it
is easier to maintain the whitelist by the names actually in
the user's .json file, rather than worrying about the names
of implicit types.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-14-git-send-email-eblake@redhat.com>
[Simplified a bit as per discussion with Eric]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The QMP input visitor allows integral values to be assigned by
promotion to a QTYPE_QFLOAT. However, when parsing an alternate,
we did not take this into account, such that an alternate that
accepts 'number' and some other type, but not 'int', would reject
integral values.
With this patch, we now have the following desirable table:
alternate has case selected for
'int' 'number' QTYPE_QINT QTYPE_QFLOAT
no no error error
no yes 'number' 'number'
yes no 'int' error
yes yes 'int' 'number'
While it is unlikely that we will ever use 'number' in an
alternate other than in the testsuite, it never hurts to be
more precise in what we allow.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-8-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Previously, working with alternates required two lookup arrays
and some indirection: for type Foo, we created Foo_qtypes[]
which maps each qtype to a value of the generated FooKind enum,
then look up that value in FooKind_lookup[] like we do for other
union types.
This has a couple of subtle bugs. First, the generator was
creating a call with a parameter '(int *) &(*obj)->type' where
type is an enum type; this is unsafe if the compiler chooses
to store the enum type in a different size than int, where
assigning through the wrong size pointer can corrupt data or
cause a SIGBUS.
Related bug, not not fixed in this patch: qapi-visit.py's
gen_visit_enum() generates a cast of its enum * argument to
int *. Marked FIXME.
Second, since the values of the FooKind enum start at zero, all
entries of the Foo_qtypes[] array that were not explicitly
initialized will map to the same branch of the union as the
first member of the alternate, rather than triggering a desired
failure in visit_get_next_type(). Fortunately, the bug seldom
bites; the very next thing the input visitor does is try to
parse the incoming JSON with the wrong parser, which normally
fails; the output visitor is not used with a C struct in that
state, and the dealloc visitor has nothing to clean up (so
there is no leak).
However, the second bug IS observable in one case: parsing an
integer causes unusual behavior in an alternate that contains
at least a 'number' member but no 'int' member, because the
'number' parser accepts QTYPE_QINT in addition to the expected
QTYPE_QFLOAT (that is, since 'int' is not a member, the type
QTYPE_QINT accidentally maps to FooKind 0; if this enum value
is the 'number' branch the integer parses successfully, but if
the 'number' branch is not first, some other branch tries to
parse the integer and rejects it). A later patch will worry
about fixing alternates to always parse all inputs that a
non-alternate 'number' would accept, for now this is still
marked FIXME in the updated test-qmp-input-visitor.c, to
merely point out that new undesired behavior of 'ans' matches
the existing undesired behavior of 'asn'.
This patch fixes the default-initialization bug by deleting the
indirection, and modifying get_next_type() to directly assign a
QTypeCode parameter. This in turn fixes the type-casting bug,
as we are no longer casting a pointer to enum to a questionable
size. There is no longer a need to generate an implicit FooKind
enum associated with the alternate type (since the QMP wire
format never uses the stringized counterparts of the C union
member names). Since the updated visit_get_next_type() does not
know which qtypes are expected, the generated visitor is
modified to generate an error statement if an unexpected type is
encountered.
Callers now have to know the QTYPE_* mapping when looking at the
discriminator; but so far, only the testsuite was even using the
C struct of an alternate types. I considered the possibility of
keeping the internal enum FooKind, but initialized differently
than most generated arrays, as in:
typedef enum FooKind {
FOO_KIND_A = QTYPE_QDICT,
FOO_KIND_B = QTYPE_QINT,
} FooKind;
to create nicer aliases for knowing when to use foo->a or foo->b
when inspecting foo->type; but it turned out to add too much
complexity, especially without a client.
There is a user-visible side effect to this change, but I
consider it to be an improvement. Previously,
the invalid QMP command:
{"execute":"blockdev-add", "arguments":{"options":
{"driver":"raw", "id":"a", "file":true}}}
failed with:
{"error": {"class": "GenericError",
"desc": "Invalid parameter type for 'file', expected: QDict"}}
(visit_get_next_type() succeeded, and the error comes from the
visit_type_BlockdevOptions() expecting {}; there is no mention of
the fact that a string would also work). Now it fails with:
{"error": {"class": "GenericError",
"desc": "Invalid parameter type for 'file', expected: BlockdevRef"}}
(the error when the next type doesn't match any expected types for
the overall alternate).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-5-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
What's more meta than using qapi to define qapi? :)
Convert QType into a full-fledged[*] builtin qapi enum type, so
that a subsequent patch can then use it as the discriminator
type of qapi alternate types. Fortunately, the judicious use of
'prefix' in the qapi definition avoids churn to the spelling of
the enum constants.
To avoid circular definitions, we have to flip the order of
inclusion between "qobject.h" vs. "qapi-types.h". Back in commit
28770e0, we had the latter include the former, so that we could
use 'QObject *' for our implementation of 'any'. But that usage
also works with only a forward declaration, whereas the
definition of QObject requires QType to be a complete type.
[*] The type has to be builtin, rather than declared in
qapi/common.json, because we want to use it for alternates even
when common.json is not included. But since it is the first
builtin enum type, we have to add special cases to qapi-types
and qapi-visit to only emit definitions once, even when two
qapi files are being compiled into the same binary (the way we
already handled builtin list types like 'intList'). We may
need to revisit how multiple qapi files share common types,
but that's a project for another day.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1449033659-25497-4-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we no longer collide with an implicit _MAX enum member,
we no longer need to reject it in the ad hoc parser, and can
remove several tests that are no longer needed.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-24-git-send-email-eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we guarantee the user doesn't have any enum values
beginning with a single underscore, we can use that for our
own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious
that the sentinel is generated.
This patch was mostly generated by applying a temporary patch:
|diff --git a/scripts/qapi.py b/scripts/qapi.py
|index e6d014b..b862ec9 100644
|--- a/scripts/qapi.py
|+++ b/scripts/qapi.py
|@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = {
| max_index = c_enum_const(name, 'MAX', prefix)
| ret += mcgen('''
| [%(max_index)s] = NULL,
|+// %(max_index)s
| };
| ''',
| max_index=max_index)
then running:
$ cat qapi-{types,event}.c tests/test-qapi-types.c |
sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list
$ git grep -l _MAX | xargs sed -i -f list
The only things not generated are the changes in scripts/qapi.py.
Rejecting enum members named 'MAX' is now useless, and will be dropped
in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Rebased to current master, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We already documented that qapi names should match specific
patterns (such as starting with a letter unless it was an enum
value or a downstream extension). Tighten that from a suggestion
into a hard requirement, which frees up names beginning with a
single underscore for qapi internal usage.
The tighter regex doesn't forbid everything insane that a user
could provide (for example, a user could name a type 'Foo-lookup'
to collide with the generated 'Foo_lookup[]' for an enum 'Foo'),
but does a good job at protecting the most obvious uses, and
also happens to reserve single leading underscore for later use.
The handling of enum values starting with a digit is tricky:
commit 9fb081e introduced a subtle bug by using c_name() on
a munged value, which would allow an enum to include the
member 'q-int' in spite of our reservation. Furthermore,
munging with a leading '_' would fail our tighter regex. So
fix it by only munging for leading digits (which are never
ticklish in c_name()) and by using a different prefix (I
picked 'D', although any letter should do).
Add new tests, reserved-member-underscore and reserved-enum-q,
to demonstrate the tighter checking.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-22-git-send-email-eblake@redhat.com>
Message-Id: <1447883135-18020-1-git-send-email-eblake@redhat.com>
[Eric's fixup squashed in]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Our qapi conventions document that '.' should only be used in
the prefix of downstream names. BlkdebugEvent was a lone
exception to this. Changing this is not backwards compatible
to the 'blockdev-add' QMP command; however, that command is
not yet fully stable. It can also be argued that the testsuite
is the biggest user of blkdebug, and that any other user can
be taught to deal with the change by paying attention to
introspection results.
Done with:
$ for str in \
l1_grow.{alloc,write,activate}_table \
l2_alloc.{cow_read,write} \
refblock_alloc.{hookup,write,write_blocks,write_table,switch_table} \
pwritev_rmw.{head,after_head,tail,after_tail}; do
str1=$(echo "$str" | sed 's/\./\\./')
str2=$(echo "$str" | sed 's/\./_/')
git grep -l "$str1" | xargs -r sed -i "s/$str1/$str2/g"
done
followed by a manual touchup to test 77 to keep the test working.
Reported-by: Markus Armbruster <armbru@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-21-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The method c_name() is supposed to do two different actions: munge
'-' into '_', and add a 'q_' prefix to ticklish names. But it did
these steps out of order, making it possible to submit input that
is not ticklish until after munging, where the output then lacked
the desired prefix.
The failure is exposed easily if you have a compiler that recognizes
C11 keywords, and try to name a member '_Thread-local', as it would
result in trying to compile the declaration 'uint64_t _Thread_local;'
which is not valid. However, this name violates our conventions
(ultimately, want to enforce that no qapi names start with single
underscore), so the test is slightly weaker by instead testing
'wchar-t'; the declaration 'uint64_t wchar_t;' is valid in C (where
wchar_t is only a typedef) but would fail with a C++ compiler (where
it is a keyword).
Fix things by reversing the order of actions within c_name().
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-18-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Detect attempts to declare two object members that would result
in the same C member name, by keying the 'seen' dictionary off
of the C name rather than the qapi name. It also requires passing
info through the check_clash() methods.
This addresses a TODO and fixes the previously-broken
args-name-clash test. The resulting error message demonstrates
the utility of the .describe() method added previously. No change
to generated code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-17-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that branches are in a separate C namespace, we can remove
the restrictions in the parser that claim a branch name would
collide with QMP, and delete the negative tests that are no
longer problematic. A separate patch can then add positive
tests to qapi-schema-test to test that any corner cases will
compile correctly.
This reverts the scripts/qapi.py portion of commit 7b2a5c2,
now that the assertions that it plugged are no longer possible.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-15-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We were previously creating all unions with an empty list for
local_members. However, it will make it easier to unify struct
and union generation if we include the generated tag member in
local_members. That way, we can have a common code pattern:
visit the base (if any), visit the local members (if any), visit
the variants (if any). The local_members of a flat union
remains empty (because the discriminator is already visited as
part of the base). Then, by visiting tag_member.check() during
AlternateType.check(), we no longer need to call it during
Variants.check().
The various front end entities now exist as follows:
struct: optional base, optional local_members, no variants
simple union: no base, one-element local_members, variants with tag_member
from local_members
flat union: base, no local_members, variants with tag_member from base
alternate: no base, no local_members, variants
With the new local members, we require a bit of finesse to
avoid assertions in the clients.
No change to generated code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-2-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
While in the long term we want throttling to be its own block filter
BDS, in the short term we want it to be part of the BB instead of a BDS;
even in the long term we may want legacy throttling to be automatically
tied to the BB.
blockdev-insert-medium and blockdev-remove-medium do not retain
throttling information in the BB (deliberately so). Therefore, using
them means tying this information to a BDS, which would break the model
described above. (The same applies to other flags such as
detect_zeroes.) We probably want to move this information to the BB or
its own filter BDS before blockdev-{insert,remove}-medium can be
considered completely stable.
Therefore, mark these functions experimental for the time being.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1449847385-13986-2-git-send-email-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
[PMM: fixed format nit (underlining) in qmp-commands.hx]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Before this patch ASAN reported:
SUMMARY: AddressSanitizer: 677165875 byte(s) leaked in 1272437 allocation(s)
After this patch:
SUMMARY: AddressSanitizer: 465 byte(s) leaked in 32 allocation(s)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1448551895-871-1-git-send-email-marcandre.lureau@redhat.com>
[Straightforwardly rebased onto the previous patch]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
We have several function parameters declared as void (*fn). This is
just a stupid way to write void *, and the only purpose writing it
like that could serve is obscuring the sin of bypassing the type
system without need.
The original sin is commit 49ee359: its qtest_add_func() is a wrapper
for g_test_add_func(). Fix the parameter type to match
g_test_add_func()'s. This uncovers type errors in ide-test.c; fix
them.
Commit 7949c0e faithfully repeated the sin for qtest_add_data_func().
Fix it the same way, along with a harmless type error uncovered in
vhost-user-test.c.
Commit 063c23d repeated it for qtest_add_abrt_handler(). The screwy
parameter gets assigned to GHook member func, so change its type to
match. Requires wrapping kill_qemu() to keep the type checker happy.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[AF/armbru: Inline GTestFunc/GTestDataFunc typedef for old GLib]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit e253c28 ("tests: Fix how qom-test is run") introduced
$(qtest-generic-y) and used it for check-qtest-% target, but did not
update check-report-qtest-%. This causes check-report-qtest-aarch64.xml
target to fail with a gtester usage error for lack of test arguments.
Fix this by adding $(qtest-generic-y) in check-report-qtest-%.
Also add it in check-clean target, spotted by Markus.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The idea is to let the top level bs have a big request alignment with
blkdebug, so that the aio_write request issued from monitor will be
serialised. This tests that QEMU doesn't crash upon the read request
from the backup job's write notifier, which is a very special case of
"reentrant" request.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1448962590-2842-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This offers full manual control over the "-drive" options.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1448962590-2842-3-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This fixes file descriptor leakage in vhost-user-bridge
application. Whenever a new callfd or kickfd is set, the previous
one should be explicitly closed. File descriptors used to map
guest's memory are closed immediately after mmap call.
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The prepare callback needs to be implemented with glib < 2.36,
quoting glib documentation:
"Since 2.36 this may be NULL, in which case the effect is as if the
function always returns FALSE with a timeout of -1."
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
TCP port 1234 may be used by another process concurrently. Instead use a
temporary unix socket.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-user-tests uses a helper thread to dispatch the vhost-user servers
sources. However the CharDriverState is not thread-safe. Therefore, when
it's given to the thread, it shouldn't be manipulated concurrently.
We dispatch cleaning the server in an idle source. By the end of the
test, we ensure not to leave anything behind by joining the thread and
finishing the sources dispatch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Minor vhost fixes. HW version tweak for PC.
Documentation and test updates.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWVzX5AAoJECgfDbjSjVRp3UUH/jmankS57MaFIfB2plhrFlk0
BAjMLhJ6GCLrDEAaMaes9wJXJJMQHfoZnwAqkfkvjabKbiq6yPZz2FIfjSKuV86Z
F6XNuMxiM2qwt/HJ5IaBX0c0Bm9bsF3zQpVAs082KfLvTrmOf8SHk4b8OFOCJMvu
asSl9J8DTo3LZwC1TNpbxvTj5k3OFhB8i16WT3lvdLv9QUxBwdUaG6WxUCZD/35C
CJnjut7n09ZbG4dfVxAVl7KubX1llpNBopbTQEyoHaaVfOvFDL5R2Gf7/YG9G0+x
aI4+rMmRt0KCTii7xjN63j88+YpGlTgrAZETzwxVolZGMOe74jGtCNQqlIBwPZI=
=I1ki
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, pc: fixes for 2.5
Minor vhost fixes. HW version tweak for PC.
Documentation and test updates.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 26 Nov 2015 16:40:25 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
vhost-user-test: fix migration overlap test
Fix memory leak on error
Revert "vhost: send SET_VRING_ENABLE at start/stop"
tests/vhost-user-bridge: read command line arguments
tests/vhost-user-bridge: propose GUEST_ANNOUNCE feature
vhost-user: clarify start and enable
vhost-user: set link down when the char device is closed
pc: Don't set hw_version on pc-*-2.5
osdep: Change default value of qemu_hw_version() to "2.5+"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
During migration, source does GET_BASE, destination does SET_BASE.
Use that as opposed to fds being configured to detect
vhost user running on both source and destination.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=YrWd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2015-11-26' into staging
QMP and QObject patches
# gpg: Signature made Thu 26 Nov 2015 09:07:18 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-monitor-2015-11-26:
qjson: Limit number of tokens in addition to total size
qjson: surprise, allocating 6 QObjects per token is expensive
qjson: store tokens in a GQueue
qjson: Convert to parser to recursive descent
qjson: replace QString in JSONLexer with GString
qjson: Inline token_is_escape() and simplify
qjson: Inline token_is_keyword() and simplify
qjson: Give each of the six structural chars its own token type
qjson: Spell out some silent assumptions
check-qjson: Add test for JSON nesting depth limit
qjson: Don't crash when input exceeds nesting limit
qjson: Apply nesting limit more sanely
monitor: Plug memory leak on QMP error
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* include additional w32 MSI install components needed for
guest-exec
* fix 'make install' when compiling with --disable-tools
* fix potential data corruption/loss when accessing files
bi-directionally via guest-file-{read,write}
* explicitly document how integer args for guest-file-seek map to
SEEK_SET/SEEK_CUR/etc to avoid platform-specific differences
v2:
* fixed missing SoB
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWVks1AAoJEDNTyc7xCLWE0/oH/3q9DtEGB5dDUMCn3BPo+FCO
M7R4uL1MB2CSXHPZxpoueZL2ZNlCpWJgidOEfVTyVrPUI68qsEcPm2vmKAQu5y7e
Dxu+yD+qA3wWqgNRhH6O7X7owq+e5cM8ZZFPZ2T89wgsQbs+TwyrOfJfypIP/cAW
cjnowxVz9kB9f0qpOJViPN0lfbtc+n5pZOm2VNluHtEWCHS8X9tqvSDtHgIU/BKV
39y/UeSKNmvl7UlTeRi6dVUbKPo1eZSExjvHoWZjXBOu3Ky75wineVMASxuC632y
IQG+1YIBl5vv84he29U6O5lW2rcbld6vff8QqvR8HzNIxnD8kfykkpmxHlxWDIA=
=bIkC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2015-11-25-v2-tag' into staging
qemu-ga patch queue for 2.5
* include additional w32 MSI install components needed for
guest-exec
* fix 'make install' when compiling with --disable-tools
* fix potential data corruption/loss when accessing files
bi-directionally via guest-file-{read,write}
* explicitly document how integer args for guest-file-seek map to
SEEK_SET/SEEK_CUR/etc to avoid platform-specific differences
v2:
* fixed missing SoB
# gpg: Signature made Wed 25 Nov 2015 23:58:45 GMT using RSA key ID F108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg: aka "Michael Roth <mdroth@utexas.edu>"
# gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>"
* remotes/mdroth/tags/qga-pull-2015-11-25-v2-tag:
qga: added another non-interactive gspawn() helper file.
qga: Better mapping of SEEK_* in guest-file-seek
tests: add file-write-read test
qga: flush explicitly when needed
qga: gspawn() console helper to Windows guest agent msi build
makefile: fix qemu-ga make install for --disable-tools
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Even though we still have the "streamer" concept, the tokens can now
be deleted as they are read. While doing so convert from QList to
GQueue, since the next step will make tokens not a QObject and we
will have to do the conversion anyway.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1448300659-23559-4-git-send-email-pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This would have prevented the regression mentioned in the previous
commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1448486613-17634-4-git-send-email-armbru@redhat.com>
Exposing OS-specific SEEK_ constants in our qapi was a mistake
(if the host has SEEK_CUR as 1, but the guest has it as 2, then
the semantics are unclear what should happen); if we had a time
machine, we would instead expose only a symbolic enum. It's too
late to change the fact that we have an integer in qapi, but we
can at least document what mapping we want to enforce for all
qga clients (and luckily, it happens to be the mapping that both
Linux and Windows use); then fix the code to match that mapping.
It also helps us filter out unsupported SEEK_DATA and SEEK_HOLE.
In the future, we may wish to move our QGA_SEEK_* constants into
qga/qapi-schema.json, along with updating the schema to take an
alternate type (either the integer, or the string value of the
enum name) - but that's too much risk during hard freeze.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This test exhibits a POSIX behaviour regarding switching between write
and read. It's undefined result if the application doesn't ensure a
flush between the two operations (with glibc, the flush can be implicit
when the buffer size is relatively small). The previous commit fixes
this test.
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1210246
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Use explicit timeouts instead of trying to approximate it by counting
the cumulative duration of nsleep calls.
In practice, the timeout if inb() dwarfed the nsleep delays, and as a
result the real timeout value became a lot larger than 5 seconds.
So: change the semantics from "Not sooner than 5 seconds" to "no more
than 5 seconds" to ensure we don't hang the tester for very long.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1448393771-15483-2-git-send-email-jsnow@redhat.com
