According to KVM commit 75d61fbc, it needs to delete the slot before
changing the KVM_MEM_READONLY flag. But QEMU commit 235e8982 only check
whether KVM_MEM_READONLY flag is set instead of changing. It doesn't
need to delete the slot if the KVM_MEM_READONLY flag is not changed.
This fixes a issue that migrating a VM at the OVMF startup stage and
VM is executing the codes in rom. Between the deleting and adding the
slot in kvm_set_user_memory_region, there is a chance that guest access
rom and trap to KVM, then KVM can't find the corresponding memslot.
While KVM (on ARM) injects an abort to guest due to the broken hva, then
guest will get stuck.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Message-Id: <1526462314-19720-1-git-send-email-zhaoshenglong@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Place them in exec.c, exec-all.h and ram_addr.h. This removes
knowledge of translate-all.h (which is an internal header) from
several files outside accel/tcg and removes knowledge of
AddressSpace from translate-all.c (as it only operates on ram_addr_t).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We do not trace guest atomic accesses. Fix it.
Tested with a modified atomic_add-bench so that it executes
a deterministic number of instructions, i.e. fixed seeding,
no threading and fixed number of loop iterations instead
of running for a certain time.
Before:
- With parallel_cpus = false (no clone syscall so it is never set to true):
220070 memory accesses
- With parallel_cpus = true (hard-coded):
212105 memory accesses <-- we're not tracing the atomics!
After:
220070 memory accesses regardless of parallel_cpus.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-id: 1527028012-21888-6-git-send-email-cota@braap.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add support for MMU protection regions that are smaller than
TARGET_PAGE_SIZE. We do this by marking the TLB entry for those
pages with a flag TLB_RECHECK. This flag causes us to always
take the slow-path for accesses. In the slow path we can then
special case them to always call tlb_fill() again, so we have
the correct information for the exact address being accessed.
This change allows us to handle reading and writing from small
regions; we cannot deal with execution from the small region.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180620130619.11362-2-peter.maydell@linaro.org
Fix the --disable-tcg breakage introduced by tb_lock's removal by
relying on the fact that tcg_enabled() is set to 0 at
compile-time under --disable-tcg.
While at it, add further asserts to fix builds that enable both
--disable-tcg and --enable-debug, which were broken even before
tb_lock's removal.
Tested to build x86_64-softmmu and i386-softmmu targets.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use mmap_lock in user-mode to protect TCG state and the page descriptors.
In !user-mode, each vCPU has its own TCG state, so no locks needed.
Per-page locks are used to protect the page descriptors.
Per-TB locks are used in both modes to protect TB jumps.
Some notes:
- tb_lock is removed from notdirty_mem_write by passing a
locked page_collection to tb_invalidate_phys_page_fast.
- tcg_tb_lookup/remove/insert/etc have their own internal lock(s),
so there is no need to further serialize access to them.
- do_tb_flush is run in a safe async context, meaning no other
vCPU threads are running. Therefore acquiring mmap_lock there
is just to please tools such as thread sanitizer.
- Not visible in the diff, but tb_invalidate_phys_page already
has an assert_memory_lock.
- cpu_io_recompile is !user-only, so no mmap_lock there.
- Added mmap_unlock()'s before all siglongjmp's that could
be called in user-mode while mmap_lock is held.
+ Added an assert for !have_mmap_lock() after returning from
the longjmp in cpu_exec, just like we do in cpu_exec_step_atomic.
Performance numbers before/after:
Host: AMD Opteron(tm) Processor 6376
ubuntu 17.04 ppc64 bootup+shutdown time
700 +-+--+----+------+------------+-----------+------------*--+-+
| + + + + + *B |
| before ***B*** ** * |
|tb lock removal ###D### *** |
600 +-+ *** +-+
| ** # |
| *B* #D |
| *** * ## |
500 +-+ *** ### +-+
| * *** ### |
| *B* # ## |
| ** * #D# |
400 +-+ ** ## +-+
| ** ### |
| ** ## |
| ** # ## |
300 +-+ * B* #D# +-+
| B *** ### |
| * ** #### |
| * *** ### |
200 +-+ B *B #D# +-+
| #B* * ## # |
| #* ## |
| + D##D# + + + + |
100 +-+--+----+------+------------+-----------+------------+--+-+
1 8 16 Guest CPUs 48 64
png: https://imgur.com/HwmBHXe
debian jessie aarch64 bootup+shutdown time
90 +-+--+-----+-----+------------+------------+------------+--+-+
| + + + + + + |
| before ***B*** B |
80 +tb lock removal ###D### **D +-+
| **### |
| **## |
70 +-+ ** # +-+
| ** ## |
| ** # |
60 +-+ *B ## +-+
| ** ## |
| *** #D |
50 +-+ *** ## +-+
| * ** ### |
| **B* ### |
40 +-+ **** # ## +-+
| **** #D# |
| ***B** ### |
30 +-+ B***B** #### +-+
| B * * # ### |
| B ###D# |
20 +-+ D ##D## +-+
| D# |
| + + + + + + |
10 +-+--+-----+-----+------------+------------+------------+--+-+
1 8 16 Guest CPUs 48 64
png: https://imgur.com/iGpGFtv
The gains are high for 4-8 CPUs. Beyond that point, however, unrelated
lock contention significantly hurts scalability.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tb_lock was needed when the function did retranslation. However,
since fca8a500d5 ("tcg: Save insn data and use it in
cpu_restore_state_from_tb") we don't do retranslation.
Get rid of the comment.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The acquisition of tb_lock was added when the async tlb_flush
was introduced in e3b9ca810 ("cputlb: introduce tlb_flush_* async work.")
tb_lock was there to allow us to do memset() on the tb_jmp_cache's.
However, since f3ced3c592 ("tcg: consistently access cpu->tb_jmp_cache
atomically") all accesses to tb_jmp_cache are atomic, so tb_lock
is not needed here. Get rid of it.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This applies to both user-mode and !user-mode emulation.
Instead of relying on a global lock, protect the list of incoming
jumps with tb->jmp_lock. This lock also protects tb->cflags,
so update all tb->cflags readers outside tb->jmp_lock to use
atomic reads via tb_cflags().
In order to find the destination TB (and therefore its jmp_lock)
from the origin TB, we introduce tb->jmp_dest[].
I considered not using a linked list of jumps, which simplifies
code and makes the struct smaller. However, it unnecessarily increases
memory usage, which results in a performance decrease. See for
instance these numbers booting+shutting down debian-arm:
Time (s) Rel. err (%) Abs. err (s) Rel. slowdown (%)
------------------------------------------------------------------------------
before 20.88 0.74 0.154512 0.
after 20.81 0.38 0.079078 -0.33524904
GTree 21.02 0.28 0.058856 0.67049808
GHashTable + xxhash 21.63 1.08 0.233604 3.5919540
Using a hash table or a binary tree to keep track of the jumps
doesn't really pay off, not only due to the increased memory usage,
but also because most TBs have only 0 or 1 jumps to them. The maximum
number of jumps when booting debian-arm that I measured is 35, but
as we can see in the histogram below a TB with that many incoming jumps
is extremely rare; the average TB has 0.80 incoming jumps.
n_jumps: 379208; avg jumps/tb: 0.801099
dist: [0.0,1.0)|▄█▁▁▁▁▁▁▁▁▁▁▁ ▁▁▁▁▁▁ ▁▁▁ ▁▁▁ ▁|[34.0,35.0]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the recently-gained QHT feature of returning the matching TB if it
already exists. This allows us to get rid of the lookup we perform
right after acquiring tb_lock.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The appended adds assertions to make sure we do not longjmp with page
locks held. Note that user-mode has nothing to check, since page_locks
are !user-mode only.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is only compiled under CONFIG_DEBUG_TCG to avoid
bloating the binary.
In user-mode, assert_page_locked is equivalent to assert_mmap_lock.
Note: There are some tb_lock assertions left that will be
removed by later patches.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting parallel TCG generation.
Instead of using a global lock (tb_lock) to protect changes
to pages, use fine-grained, per-page locks in !user-mode.
User-mode stays with mmap_lock.
Sometimes changes need to happen atomically on more than one
page (e.g. when a TB that spans across two pages is
added/invalidated, or when a range of pages is invalidated).
We therefore introduce struct page_collection, which helps
us keep track of a set of pages that have been locked in
the appropriate locking order (i.e. by ascending page index).
This commit first introduces the structs and the function helpers,
to then convert the calling code to use per-page locking. Note
that tb_lock is not removed yet.
While at it, rename tb_alloc_page to tb_page_add, which pairs with
tb_page_remove.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This greatly simplifies next commit's diff.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
So that we pass a same-page range to tb_invalidate_phys_page_range,
instead of always passing an end address that could be on a different
page.
As discussed with Peter Maydell on the list [1], tb_invalidate_phys_page_range
doesn't actually do much with 'end', which explains why we have never
hit a bug despite going against what the comment on top of
tb_invalidate_phys_page_range requires:
> * Invalidate all TBs which intersect with the target physical address range
> * [start;end[. NOTE: start and end must refer to the *same* physical page.
The appended honours the comment, which avoids confusion.
While at it, rework the loop into a for loop, which is less error prone
(e.g. "continue" won't result in an infinite loop).
[1] https://lists.gnu.org/archive/html/qemu-devel/2017-07/msg09165.html
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting parallel TCG generation.
Move the hole to the end of the struct, so that a u32
field can be added there without bloating the struct.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Groundwork for supporting parallel TCG generation.
We never remove entries from the radix tree, so we can use cmpxchg
to implement lockless insertions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This commit does several things, but to avoid churn I merged them all
into the same commit. To wit:
- Use uintptr_t instead of TranslationBlock * for the list of TBs in a page.
Just like we did in (c37e6d7e "tcg: Use uintptr_t type for
jmp_list_{next|first} fields of TB"), the rationale is the same: these
are tagged pointers, not pointers. So use a more appropriate type.
- Only check the least significant bit of the tagged pointers. Masking
with 3/~3 is unnecessary and confusing.
- Introduce the TB_FOR_EACH_TAGGED macro, and use it to define
PAGE_FOR_EACH_TB, which improves readability. Note that
TB_FOR_EACH_TAGGED will gain another user in a subsequent patch.
- Update tb_page_remove to use PAGE_FOR_EACH_TB. In case there
is a bug and we attempt to remove a TB that is not in the list, instead
of segfaulting (since the list is NULL-terminated) we will reach
g_assert_not_reached().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Thereby making it per-TCGContext. Once we remove tb_lock, this will
avoid an atomic increment every time a TB is invalidated.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This paves the way for enabling scalable parallel generation of TCG code.
Instead of tracking TBs with a single binary search tree (BST), use a
BST for each TCG region, protecting it with a lock. This is as scalable
as it gets, since each TCG thread operates on a separate region.
The core of this change is the introduction of struct tcg_region_tree,
which contains a pointer to a GTree and an associated lock to serialize
accesses to it. We then allocate an array of tcg_region_tree's, adding
the appropriate padding to avoid false sharing based on
qemu_dcache_linesize.
Given a tc_ptr, we first find the corresponding region_tree. This
is done by special-casing the first and last regions first, since they
might be of size != region.size; otherwise we just divide the offset
by region.stride. I was worried about this division (several dozen
cycles of latency), but profiling shows that this is not a fast path.
Note that region.stride is not required to be a power of two; it
is only required to be a multiple of the host's page size.
Note that with this design we can also provide consistent snapshots
about all region trees at once; for instance, tcg_tb_foreach
acquires/releases all region_tree locks before/after iterating over them.
For this reason we now drop tb_lock in dump_exec_info().
As an alternative I considered implementing a concurrent BST, but this
can be tricky to get right, offers no consistent snapshots of the BST,
and performance and scalability-wise I don't think it could ever beat
having separate GTrees, given that our workload is insert-mostly (all
concurrent BST designs I've seen focus, understandably, on making
lookups fast, which comes at the expense of convoluted, non-wait-free
insertions/removals).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The meaning of "existing" is now changed to "matches in hash and
ht->cmp result". This is saner than just checking the pointer value.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
qht_lookup now uses the default cmp function. qht_lookup_custom is defined
to retain the old behaviour, that is a cmp function is explicitly provided.
qht_insert will gain use of the default cmp in the next patch.
Note that we move qht_lookup_custom's @func to be the last argument,
which makes the new qht_lookup as simple as possible.
Instead of this (i.e. keeping @func 2nd):
0000000000010750 <qht_lookup>:
10750: 89 d1 mov %edx,%ecx
10752: 48 89 f2 mov %rsi,%rdx
10755: 48 8b 77 08 mov 0x8(%rdi),%rsi
10759: e9 22 ff ff ff jmpq 10680 <qht_lookup_custom>
1075e: 66 90 xchg %ax,%ax
We get:
0000000000010740 <qht_lookup>:
10740: 48 8b 4f 08 mov 0x8(%rdi),%rcx
10744: e9 37 ff ff ff jmpq 10680 <qht_lookup_custom>
10749: 0f 1f 80 00 00 00 00 nopl 0x0(%rax)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently we don't support board configurations that put an IOMMU
in the path of the CPU's memory transactions, and instead just
assert() if the memory region fonud in address_space_translate_for_iotlb()
is an IOMMUMemoryRegion.
Remove this limitation by having the function handle IOMMUs.
This is mostly straightforward, but we must make sure we have
a notifier registered for every IOMMU that a transaction has
passed through, so that we can flush the TLB appropriately
when any of the IOMMUs change their mappings.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180604152941.20374-5-peter.maydell@linaro.org
The API for cpu_transaction_failed() says that it takes the physical
address for the failed transaction. However we were actually passing
it the offset within the target MemoryRegion. We don't currently
have any target CPU implementations of this hook that require the
physical address; fix this bug so we don't get confused if we ever
do add one.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180611125633.32755-3-peter.maydell@linaro.org
The 'addr' field in the CPUIOTLBEntry struct has a rather non-obvious
use; add a comment documenting it (reverse-engineered from what
the code that sets it is doing).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180611125633.32755-2-peter.maydell@linaro.org
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to address_space_translate()
and address_space_translate_cached(). Callers either have an
attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-4-peter.maydell@linaro.org
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to tb_invalidate_phys_addr().
Its callers either have an attrs value to hand, or don't care
and can use MEMTXATTRS_UNSPECIFIED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180521140402.23318-3-peter.maydell@linaro.org
Usually the logging of the CPU state produced by -d cpu is sufficient
to diagnose problems, but sometimes you want to see the state of
the floating point registers as well. We don't want to enable that
by default as it adds a lot of extra data to the log; instead,
allow it to be optionally enabled via -d fpu.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180510130024.31678-1-peter.maydell@linaro.org
* dtc configure fixes
* MemoryRegionCache second try
* Deprecated option removal
* add support for Hyper-V reenlightenment MSRs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJa9Y2qAAoJEL/70l94x66Df8EIAI4pi+zf1mTlH0Koi+oqOg+d
geBC6N9IA+n1p90XERnPbuiT19NjON2R1Z907SbzDkijxdNRoYUoQf7Z+ZBTENjn
dYsVvgLYzajGLWWtJetPPaNFAqeF2z8B3lbVQnGVLzH5pQQ2NS1NJsvXQA2LslLs
2ll1CJ2EEBhayoBSbHK+0cY85f+DUgK/T1imIV2T/rwcef9Rw218nvPfGhPBSoL6
tI2xIOxz8bBOvZNg2wdxpaoPuDipBFu6koVVbaGSgXORg8k5CEcKNxInztufdELW
KZK5ORa3T0uqu5T/GGPAfm/NbYVQ4aTB5mddshsXtKbBhnbSfRYvpVsR4kQB/Hc=
=oC1r
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Don't silently truncate extremely long words in the command line
* dtc configure fixes
* MemoryRegionCache second try
* Deprecated option removal
* add support for Hyper-V reenlightenment MSRs
# gpg: Signature made Fri 11 May 2018 13:33:46 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (29 commits)
rename included C files to foo.inc.c, remove osdep.h
pc-dimm: fix error messages if no slots were defined
build: Silence dtc directory creation
shippable: Remove Debian 8 libfdt kludge
configure: Display if libfdt is from system or git
configure: Really use local libfdt if the system one is too old
i386/kvm: add support for Hyper-V reenlightenment MSRs
qemu-doc: provide details of supported build platforms
qemu-options: Remove deprecated -no-kvm-irqchip
qemu-options: Remove deprecated -no-kvm-pit-reinjection
qemu-options: Bail out on unsupported options instead of silently ignoring them
qemu-options: Remove remainders of the -tdf option
qemu-options: Mark -virtioconsole as deprecated
target/i386: sev: fix memory leaks
opts: don't silently truncate long option values
opts: don't silently truncate long parameter keys
accel: use g_strsplit for parsing accelerator names
update-linux-headers: drop hyperv.h
qemu-thread: always keep the posix wrapper layer
exec: reintroduce MemoryRegion caching
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/iotkit.c: fix minor memory leak
* softfloat: fix wrong-exception-flags bug for multiply-add corner case
* arm: isolate and clean up DTB generation
* implement Arm v8.1-Atomics extension
* Fix some bugs and missing instructions in the v8.2-FP16 extension
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uXY+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180510' into staging
target-arm queue:
* hw/arm/iotkit.c: fix minor memory leak
* softfloat: fix wrong-exception-flags bug for multiply-add corner case
* arm: isolate and clean up DTB generation
* implement Arm v8.1-Atomics extension
* Fix some bugs and missing instructions in the v8.2-FP16 extension
# gpg: Signature made Thu 10 May 2018 18:44:34 BST
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20180510: (21 commits)
target/arm: Clear SVE high bits for FMOV
target/arm: Fix float16 to/from int16
target/arm: Implement vector shifted FCVT for fp16
target/arm: Implement vector shifted SCVF/UCVF for fp16
target/arm: Enable ARM_FEATURE_V8_ATOMICS for user-only
target/arm: Implement CAS and CASP
target/arm: Fill in disas_ldst_atomic
target/arm: Introduce ARM_FEATURE_V8_ATOMICS and initial decode
target/riscv: Use new atomic min/max expanders
tcg: Use GEN_ATOMIC_HELPER_FN for opposite endian atomic add
tcg: Introduce atomic helpers for integer min/max
target/xtensa: Use new min/max expanders
target/arm: Use new min/max expanders
tcg: Introduce helpers for integer min/max
atomic.h: Work around gcc spurious "unused value" warning
make sure that we aren't overwriting mc->get_hotplug_handler by accident
arm/boot: split load_dtb() from arm_load_kernel()
platform-bus-device: use device plug callback instead of machine_done notifier
pc: simplify MachineClass::get_hotplug_handler handling
softfloat: Handle default NaN mode after pickNaNMulAdd, not before
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# target/riscv/translate.c
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Given that this atomic operation will be used by both risc-v
and aarch64, let's not duplicate code across the two targets.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While at it, use int for both num_insns and max_insns to make
sure we have same-type comparisons.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is called just before os_setup_post. Currently none of the
accelerators provide this hook, but the Xen one is going to provide
one in a moment.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
In icount mode, instructions that access io memory spaces in the middle
of the translation block invoke TB recompilation. After recompilation,
such instructions become last in the TB and are allowed to access io
memory spaces.
When the code includes instruction like i386 'xchg eax, 0xffffd080'
which accesses APIC, QEMU goes into an infinite loop of the recompilation.
This instruction includes two memory accesses - one read and one write.
After the first access, APIC calls cpu_report_tpr_access, which restores
the CPU state to get the current eip. But cpu_restore_state_from_tb
resets the cpu->can_do_io flag which makes the second memory access invalid.
Therefore the second memory access causes a recompilation of the block.
Then these operations repeat again and again.
This patch moves resetting cpu->can_do_io flag from
cpu_restore_state_from_tb to cpu_loop_exit* functions.
It also adds a parameter for cpu_restore_state which controls restoring
icount. There is no need to restore icount when we only query CPU state
without breaking the TB. Restoring it in such cases leads to the
incorrect flow of the virtual time.
In most cases new parameter is true (icount should be recalculated).
But there are two cases in i386 and openrisc when the CPU state is only
queried without the need to break the TB. This patch fixes both of
these cases.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <20180409091320.12504.35329.stgit@pasha-VirtualBox>
[rth: Make can_do_io setting unconditional; move from cpu_exec;
make cpu_loop_exit_{noexc,restore} call cpu_loop_exit.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A mistake in the type passed to sizeof, that happens to work
when the out-of-line fallback itself is using host vectors,
but fails when using only the base types.
Tested-by: Emilio G. Cota <cota@braap.org>
Reported-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have confused the number of instructions that have been
executed in the TB with the number of instructions needed
to repeat the I/O instruction.
We have used cpu_restore_state_from_tb, which means that
the guest pc is pointing to the I/O instruction. The only
time the answer to the later question is not 1 is when
MIPS or SH4 need to re-execute the branch for the delay
slot as well.
We must rely on cpu->cflags_next_tb to generate the next TB,
as otherwise we have a race condition with other guest cpus
within the TB cache.
Fixes: 0790f86861
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180319031545.29359-1-richard.henderson@linaro.org>
Tested-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJapqaMAAoJEL/70l94x66DQoUH/Rvg+a8giz/SrEA4P8D3Cb2z
4GNbNUUoy4oU0ltD5IAMskMwpOsvl1batE0D+pKIlfO9NV4+Cj2kpgo0p9TxoYqM
VCby3wRtx27zb5nVytC6M++iIKXmeEMqXmFw61I6umddNPSl4IR3hiHEE0DM+7dV
UPIOvJeEiazyQaw3Iw+ZctNn8dDBKc/+6oxP9xRcYTaZ6hB4G9RZkqGNNSLcJkk7
R0UotdjzIZhyWMOkjIwlpTF4sWv8gsYUV4bPYKMYho5B0Obda2dBM3I1kpA8yDa/
xZ5lheOaAVBZvM5aMIcaQPa65MO9hLyXFmhMOgyfpJhLBBz6Qpa4OLLI6DeTN+0=
=UAgA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel)
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
# gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
tcg: fix cpu_io_recompile
replay: update documentation
replay: save vmstate of the asynchronous events
replay: don't process async events when warping the clock
scripts/replay-dump.py: replay log dumper
replay: avoid recursive call of checkpoints
replay: check return values of fwrite
replay: push replay_mutex_lock up the call tree
replay: don't destroy mutex at exit
replay: make locking visible outside replay code
replay/replay-internal.c: track holding of replay_lock
replay/replay.c: bump REPLAY_VERSION again
replay: save prior value of the host clock
replay: added replay log format description
replay: fix save/load vm for non-empty queue
replay: fixed replay_enable_events
replay: fix processing async events
cpu-exec: fix exception_index handling
hw/i386/pc: Factor out the superio code
hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/i386-softmmu.mak
# default-configs/x86_64-softmmu.mak
Inorder to integerate the Secure Encryption Virtualization (SEV) support
add few high-level memory encryption APIs which can be used for encrypting
the guest memory region.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split from a patch by Brijesh Singh (brijesh.singh@amd.com).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
cpu_io_recompile() function was broken by
the commit 9b990ee5a3. Instead of regenerating
the block starting from PC of the original block, it just set the instruction
counter for TCG. In most cases this was unnoticed, but in icount mode
there was an exception for incorrect usage of CF_LAST_IO flag.
This patch recovers recompilation of the original block and also
configures translation for executing single IO instruction which
caused a recompilation.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20180227095338.1060.27385.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Function cpu_handle_interrupt calls cc->cpu_exec_interrupt to process
pending hardware interrupts. Under the hood cpu_exec_interrupt uses
cpu->exception_index to pass information to the internal function which
is usually common for exception and interrupt processing.
But this value is not reset after return and may be processed again
by cpu_handle_exception. This does not happen due to overwriting
the exception_index at the end of cpu_handle_interrupt.
But this branch may also overwrite the valid exception_index in some cases.
Therefore this patch:
1. resets exception_index just after the call to cpu_exec_interrupt
2. prevents overwriting the meaningful value of exception_index
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180227095140.1060.61357.stgit@pasha-VirtualBox>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
-----BEGIN PGP SIGNATURE-----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=DMbf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2018-02-07-v4' into staging
Miscellaneous patches for 2018-02-07
# gpg: Signature made Fri 09 Feb 2018 12:52:51 GMT
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-misc-2018-02-07-v4:
Move include qemu/option.h from qemu-common.h to actual users
Drop superfluous includes of qapi/qmp/qjson.h
Drop superfluous includes of qapi/qmp/dispatch.h
Include qapi/qmp/qnull.h exactly where needed
Include qapi/qmp/qnum.h exactly where needed
Include qapi/qmp/qbool.h exactly where needed
Include qapi/qmp/qstring.h exactly where needed
Include qapi/qmp/qdict.h exactly where needed
Include qapi/qmp/qlist.h exactly where needed
Include qapi/qmp/qobject.h exactly where needed
qdict qlist: Make most helper macros functions
Eliminate qapi/qmp/types.h
Typedef the subtypes of QObject in qemu/typedefs.h, too
Include qmp-commands.h exactly where needed
Drop superfluous includes of qapi/qmp/qerror.h
Include qapi/error.h exactly where needed
Drop superfluous includes of qapi-types.h and test-qapi-types.h
Clean up includes
Use #include "..." for our own headers, <...> for others
vnc: use stubs for CONFIG_VNC=n dummy functions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
Use dup to convert a non-constant scalar to a third vector.
Add addition, multiplication, and logical operations with an immediate.
Add addition, subtraction, multiplication, and logical operations with
a non-constant scalar. Allow for the front-end to build operations in
which the scalar operand comes first.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No vector ops as yet. SSE only has direct support for 8- and 16-bit
saturation; handling 32- and 64-bit saturation is much more expensive.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Shannon Zhao
Paolo Bonzini
Emilio G. Cota
Peter Maydell
Philippe Mathieu-Daudé
Laurent Vivier
Richard Henderson
Daniel P. Berrangé
Ian Jackson
Pavel Dovgalyuk
Brijesh Singh
Markus Armbruster