The interesting part of reopening an image is from which sources the
effective options should be taken, i.e. which options take precedence
over which other options. This patch documents the precedence that will
be implemented in the following patches.
It also refactors bdrv_reopen_queue(), so that the top-level reopened
node is handled the same way as children are. Option/flag inheritance
from the parent becomes just one item in the list and is done at the
beginning of the function, similar to how the other items are/will be
handled.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If the child was defined in the same context (-drive argument or
blockdev-add QMP command) as its parent, a reopen of the parent should
work the same and allow changing options of the child.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Instead of passing a separate drv argument to bdrv_open_common(), just
make sure that a "driver" option is set in the QDict. This also means
that a "driver" entry is consistently present in bs->options now.
This is another step towards keeping all options in the QDict (which is
the represenation of the blockdev-add QMP command).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In order to decide whether a blkdebug: filename can be produced or a
json: one is necessary, blkdebug checked whether bs->options had more
options than just "config", "x-image" or "image" (the latter including
nested options). That doesn't work well when generic block layer options
are present.
This patch passes an option QDict to the driver that contains only
driver-specific options, i.e. the options for the general block layer as
well as child nodes are already filtered out. Works much better this
way.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Some drivers have nested options (e.g. blkdebug rule arrays), which
don't belong to a child node and shouldn't be removed. Don't remove all
options with "." in their name, but check for the complete prefixes of
actually existing child nodes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The code already special-cased "node-name", which is currently the only
option passed in the QDict that isn't driver-specific. Generalise the
code to take all general block layer options into consideration.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
For bs->file, using references to existing BDSes has been possible for a
while already. This patch enables the same for bs->backing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This fixes bdrv_reopen() calls like the following one:
qemu-io -c 'open -o overlap-check.template=all /tmp/test.qcow2' \
-c 'reopen -o overlap-check=none'
The approach taken so far would result in an options QDict that has both
"overlap-check.template=all" and "overlap-check=none", which obviously
conflicts. In this case, the old option should be overridden by the
newly specified option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
No need to keep two separate enums, where editing one is likely
to forget the other. Now that we can specify a qapi enum prefix,
we don't even have to change the bulk of the uses.
get_event_by_name() could perhaps be replaced by qapi_enum_parse(),
but I left that for another day.
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The "need_check_timer" is used to clear the "NEED_CHECK" flag in the
image header after a grace period once metadata update has finished. In
compliance to the bdrv_drain semantics we should make sure it remains
deleted once .bdrv_drain is called.
We cannot reuse qed_need_check_timer_cb because here it doesn't satisfy
the assertion. Do the "plug" and "flush" calls manually.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1447064214-29930-10-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A few uses of error_set(ERROR_CLASS_GENERIC_ERROR) were missed in
c6bd8c706, or have snuck in since. Nuke them.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447224690-9743-19-git-send-email-eblake@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
[Indentation tidied up, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There are two ways to check for I/O limits in a BlockDriverState:
- bs->throttle_state: if this pointer is not NULL, it means that this
BDS is member of a throttling group, its ThrottleTimers structure
has been initialized and its I/O limits are ready to be applied.
- bs->io_limits_enabled: if true it means that the throttle_state
pointer is valid _and_ the limits are currently enabled.
The latter is used in several places to check whether a BDS has I/O
limits configured, but what it really checks is whether requests
are being throttled or not. For example, io_limits_enabled can be
temporarily set to false in cases like bdrv_read_unthrottled() without
otherwise touching the throtting configuration of that BDS.
This patch replaces bs->io_limits_enabled with bs->throttle_state in
all cases where what we really want to check is the existence of I/O
limits, not whether they are currently enabled or not.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Passing an empty string allows opening an image but not its backing
file. This was already described in the API documentation, only the
implementation was missing.
This is useful for creating snapshots using images opened with
blockdev-add, since they are not supposed to have a backing image
before the operation.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When inserting a BDS tree into a BB, we will need to add the root BDS to
this list. Since we will want to do that in the blockdev-insert-medium
implementation in blockdev.c, we will need access to it there.
This patch is not exactly elegant, but bdrv_states will be removed in
the future anyway because we no longer need it since we have BBs.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blk_bs() will not necessarily return a non-NULL value any more (unless
blk_is_available() is true or it can be assumed to otherwise, e.g.
because it is called immediately after a successful blk_new_with_bs() or
blk_new_open()).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These options are only relevant for the user of a whole BDS tree (like a
guest device or a block job) and should thus be moved into the
BlockBackend.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As the comment above bdrv_get_stats() says, BlockAcctStats is something
which belongs to the device instead of each BlockDriverState. This patch
therefore moves it into the BlockBackend.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
guest_block_size is a guest device property so it should be moved into
the interface between block layer and guest devices, which is the
BlockBackend.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to handle host device passthrough, some guest device models
may call blk_is_inserted() to check whether the medium is inserted on
the host, when checking the guest tray status.
This tray status is inquired by blk_dev_change_media_cb(); because
bdrv_is_inserted() (invoked by blk_is_inserted()) always returns false
for BDS with drv set to NULL, blk_dev_change_media_cb() should therefore
be called before drv is set to NULL.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If bdrv_is_inserted() is called on the top level BDS, it should make
sure all nodes in the BDS tree are actually inserted.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make bdrv_is_inserted(), blk_is_inserted(), and the callback
BlockDriver.bdrv_is_inserted() return a bool.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This flag should not be set for the root BDS only, but for any BDS that
is being created while incoming migration is pending, so setting it is
moved from blockdev_init() to bdrv_fill_options().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The coroutine files are currently referenced by the block-obj-y
variable. The coroutine functionality though is already used by
more than just the block code. eg migration code uses coroutine
yield. In the future the I/O channel code will also use the
coroutine yield functionality. Since the coroutine code is nicely
self-contained it can be easily built as part of the libqemuutil.a
library, making it widely available.
The headers are also moved into include/qemu, instead of the
include/block directory, since they are now part of the util
codebase, and the impl was never in the block/ directory
either.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If a node-name is not specified, automatically generate the node-name.
Generated node-names will use the "block" sub-system identifier.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_unref() can be called with a NULL argument and doesn't do anything
then. Make bdrv_unref_child() consistent with it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
bdrv_swap() is unused now. Remove it and all functions that have
no other users than bdrv_swap(). In particular, this removes the
.bdrv_rebind callbacks from block drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This cleans up the mess we left behind in the mirror code after the
previous patch. Instead of using bdrv_swap(), just change pointers.
The interface change of the mirror job that callers must consider is
that after job completion, their local BDS pointers still point to the
same node now. qemu-img must change its code accordingly (which makes it
easier to understand); the other callers stays unchanged because after
completion they don't do anything with the BDS, but just with the job,
and the job is still owned by the source BDS.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Remember all parent nodes and just change the pointers there instead of
swapping the contents of the BlockDriverState.
Handling of snapshot=on must be moved further down in bdrv_open()
because *pbs (which is the bs pointer in the BlockBackend) must already
be set before bdrv_append() is called. Otherwise bdrv_append() changes
the BB's pointer to the temporary snapshot, but bdrv_open() overwrites
it with the read-only original image.
We also need to be careful to update callers as the interface changes
(becomes less insane): Previously, the meaning of the two parameters was
inverted when bdrv_append() returns. Now any BDS pointers keep pointing
to the same node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
After bdrv_swap(), some fields must be moved back to their original BDS
to compensate for the effects that a swap of the contents of the objects
has while keeping the old addresses. Other fields must be moved back
because they should logically be moved and must stay on top
When replacing bdrv_swap() with operations changing the pointers in the
parents, we only need the latter and must avoid swapping the former.
Split the function accordingly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This simplifies the code somewhat, especially when dropping whole
backing file subchains.
The exception is the mirroring code that does adventurous things with
bdrv_swap() and in order to keep it working, I had to duplicate most of
bdrv_set_backing_hd() locally. We'll get rid again of this ugliness
shortly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This is the final step in converting all of the BlockDriverState
pointers that block drivers use to BdrvChild.
After this patch, bs->children contains the full list of child nodes
that are referenced by a given BDS, and these children are only
referenced through BdrvChild, so that updating the pointer in there is
enough for changing edges in the graph.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
It is unused now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch removes the temporary duplication between bs->file and
bs->file_child by converting everything to BdrvChild.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Store the BdrvChild for bs->file. At this point, bs->file_child->bs just
duplicates the bs->file pointer. Later, it will completely replace it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Disabling I/O limits from a BDS also drains all pending throttled
requests, so it should be done at the beginning of bdrv_close() with
the rest of the bdrv_drain() calls before the BlockDriver is closed.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is unused by now, so we can drop it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that this parameter is effectively unused, we can drop it and change
the function accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that this parameter is effectively unused, we can drop it and just
pass NULL to bdrv_fill_options().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that this parameter is effectively unused, we can drop it and just
pass NULL on to bdrv_open_inherit().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change all callers of bdrv_open() to pass the driver name in the options
QDict instead of passing its BlockDriver pointer.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will let us print options in a format that the user would actually
write it on the command line (foo=bar,baz=asd,etc=def), without
prepending a spurious comma at the beginning of the list, or quoting
values unnecessarily. This patch provides the following changes:
* write and id=, if the option has an id
* do not print separator before the first element
* do not quote string arguments
* properly escape commas (,) for QEMU
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We use mirror+replace to fix quorum's broken child. bs/s->common.bs
is quorum, and to_replace is the broken child. The new child is target_bs.
Without this patch, the replace node can be any node, and it can be
top BDS with BB, or another quorum's child. We just check if the broken
child is part of the quorum BDS in this patch.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Message-id: 55A86486.1000404@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch moves bdrv_attach_child() from the individual places that add
a backing file to a BDS to bdrv_set_backing_hd(), which is called by all
of them. It also adds bdrv_detach_child() there.
For normal operation (starting with one backing file chain and not
changing it until the topmost image is closed) and live snapshots, this
constitutes no change in behaviour.
For all other cases, this is a fix for the bug that the old backing file
was still referenced as a child, and the new one wasn't referenced.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Block drivers may still want to access their child nodes in their
.bdrv_close handler. If they unref and/or detach a child by themselves,
this should not result in a double free.
There is additional code for backing files, which are just a special
case of child nodes. The same applies for them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This is the counterpart for bdrv_open_child(). It decreases the
reference count of the child BDS and removes it from the list of
children of the given parent BDS.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
It is the same as bdrv_open_image(), except that it doesn't only return
success or failure, but the newly created BdrvChild object for the new
child node.
As the BdrvChild object already contains a BlockDriverState pointer (and
this is supposed to become the only pointer so that bdrv_append() and
friends can just change a single pointer in BdrvChild), the pbs
parameter is removed for bdrv_open_child().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Let the callers of bdrv_open_inherit() call bdrv_attach_child(). It
needs to be called in all cases where bdrv_open_inherit() succeeds (i.e.
returns 0) and a child_role is given.
bdrv_attach_child() is moved upwards to avoid a forward declaration.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
There callers work on a single BlockDriverState subtree, where using
bdrv_drain() is more accurate.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Using this function would always be wrong because a dirty bitmap must
have a specific owner that consumes the dirty bits and calls
bdrv_reset_dirty_bitmap().
Remove the unused function to avoid future misuse.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of checking bs->sg use bdrv_is_sg() consistently throughout
the code.
Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435056300-14924-2-git-send-email-dimara@arrikto.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The function bdrv_clear_dirty_bitmap() is updated to use
faster hbitmap_reset_all() call.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 555E868A.60506@cn.fujitsu.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=QgYk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer core and image format patches
# gpg: Signature made Fri Jun 12 16:08:53 2015 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (25 commits)
block: Fix reopen flag inheritance
block: Add BlockDriverState.inherits_from
block: Add list of children to BlockDriverState
queue.h: Add QLIST_FIX_HEAD_PTR()
block: Drain requests before swapping nodes in bdrv_swap()
block: Move flag inheritance to bdrv_open_inherit()
block: Use QemuOpts in bdrv_open_common()
block: Use macro for cache option names
vmdk: Use bdrv_open_image()
quorum: Use bdrv_open_image()
check-qdict: Test cases for new functions
qdict: Add qdict_{set,copy}_default()
qdict: Add qdict_array_entries()
iotests: Add tests for overriding BDRV_O_PROTOCOL
block: driver should override flags in bdrv_open()
block: Change bitmap truncate conditional to assertion
block: record new size in bdrv_dirty_bitmap_truncate
raw-posix: Fix .bdrv_co_get_block_status() for unaligned image size
vmdk: Use vmdk_find_index_in_cluster everywhere
vmdk: Fix index_in_cluster calculation in vmdk_co_get_block_status
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When reopening an image, the block layer already takes care to reopen
bs->file as well with recalculated inherited flags. The same must happen
for any other child (most notably missing before this patch: backing
files).
If bs->file (or any other child) didn't originally inherit from bs, e.g.
because it was created separately and then only referenced, it must not
inherit flags on reopen either, so check the inherited_from field before
propagation the reopen down.
VMDK already reopened its extents manually; this code can now be
dropped.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Currently, the block layer assumes that any block node can have only one
parent, and if it has a parent, that it inherits some options/flags from
this parent.
This is not true any more: With references used in block device
creation, a single node can be used by multiple parents, or it can be
created separately and not inherit flags from any parent.
To handle reopens correctly, a node must know from which parent it
inherited options. This patch adds the information to BlockDriverState.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This allows iterating over all children of a given BDS, not only
including bs->file and bs->backing_hd, but also driver-specific
ones like VMDK extents or Quorum children.
For bdrv_swap(), the list of children of the swapped BDS stays at that
BDS (because that's where the pointers stay as well). The list head
moves and pointers to it must be fixed up therefore.
The list of children in the parent of the swapped BDS is not affected by
the swap. The contents of the BDS objects is swapped, so the existing
pointer in the parent automatically points to the newly swapped in BDS.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
bdrv_swap() requires that there are no requests in flight on either of
the two devices. The request coroutine would work on the wrong
BlockDriverState object (with bs->opaque even being interpreted as a
different type potentially) and all sorts of bad things would result
from this.
The currently existing callers mostly ensure that there is no I/O
pending on nodes that are swapped. In detail, this is:
1. Live snapshots. This goes through qmp_transaction(), which calls
bdrv_drain_all() before doing anything. The command is executed
synchronously, so no new I/O can be issued concurrently.
2. snapshot=on in bdrv_open(). We're in the middle of opening the image
(both the original image and its temporary overlay), so there can't
be any I/O in flight yet.
3. Mirroring. bdrv_drain() is already used on the source device so that
the mirror doesn't miss anything. However, the main loop runs between
that and the bdrv_swap() (which is actually a bug, being addressed in
another series), so there is a small window in which new I/O might be
issued that would be in flight during bdrv_swap().
It is safer to just drain the request queue of both devices in
bdrv_swap() instead of relying on callers to do the right thing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Instead of letting every caller of bdrv_open() determine the right flags
for its child node manually and pass them to the function, pass the
parent node and the role of the newly opened child (like backing file,
protocol layer, etc.).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Instead of manually parsing options and then deleting them from the
options QDict, just use QemuOpts like most other places that deal with
block device options.
More options will be added there and then QemuOpts is a lot more
manageable than open-coding everything.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The BDRV_O_PROTOCOL flag should have an impact only if no driver is
specified explicitly. Therefore, if bdrv_open() is called with an
explicit block driver argument (either through the options QDict or
through the drv parameter) and that block driver is a protocol block
driver, BDRV_O_PROTOCOL should be set; if it is a format block driver,
BDRV_O_PROTOCOL should be unset.
While there was code to unset the flag in case a format block driver
has been selected, it only followed the bdrv_fill_options() function
call whereas the flag in fact needs to be adjusted before it is used
there.
With that change, BDRV_O_PROTOCOL will always be set if the BDS should
be a protocol driver; if the driver has been specified explicitly, the
new code will set it; and bdrv_fill_options() will only "probe" a
protocol driver if BDRV_O_PROTOCOL is set. The probing after
bdrv_fill_options() cannot select a protocol driver.
Thus, bdrv_open_image() to open BDS.file is never called if a protocol
BDS is about to be created. With that change in turn it is impossible to
call bdrv_open_common() with a protocol drv and file != NULL, which
allows us to remove the bdrv_swap() call.
This change breaks a test case in qemu-iotest 051:
"-drive file=t.qcow2,file.driver=qcow2" now works because the explicitly
specified "qcow2" overrides the BDRV_O_PROTOCOL which is automatically
set for the "file" BDS (and the filename is just passed down).
Therefore, this patch removes that test case.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is an artifact of an older version that had both all-bitmap and
single-bitmap truncate functions, and some info got lost in the shuffle.
Bitmaps can only be frozen during a backup operation, and a backup
operation should prevent a resize operation, so just assert that this
cannot happen.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ce1ffea8 neglected to update the BdrvDirtyBitmap structure
itself for internal consistency. It's currently not an issue,
but for migration and persistence series this will cause headaches.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_swap() touches the fields of a BlockDriverState that are
protected by the ThrottleGroup lock. Although those fields end up in
their original place, they are temporarily swapped in the process,
so there's a chance that an operation on a member of the same group
happening on a different thread can try to use them.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: d92dc40d7c4f1fc5cda5cbbf4ffb7a4670b79d17.1433779731.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The throttle group support use a cooperative round robin scheduling
algorithm.
The principles of the algorithm are simple:
- Each BDS of the group is used as a token in a circular way.
- The active BDS computes if a wait must be done and arms the right
timer.
- If a wait must be done the token timer will be armed so the token
will become the next active BDS.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: f0082a86f3ac01c46170f7eafe2101a92e8fde39.1433779731.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Group throttling will share ThrottleState between multiple bs.
As a consequence the ThrottleState will be accessed by multiple aio
context.
Timers are tied to their aio context so they must go out of the
ThrottleState structure.
This commit paves the way for each bs of a common ThrottleState to
have its own timer.
Signed-off-by: Benoit Canet <benoit.canet@nodalink.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 6cf9ea96d8b32ae2f8769cead38f68a6a0c8c909.1433779731.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Bitmaps can be in a handful of different states with potentially
more to come as we tool around with migration and persistence patches.
Management applications may need to know why certain bitmaps are
unavailable for various commands, e.g. busy in another operation,
busy being migrated, etc.
Right now, all we offer is BlockDirtyInfo's boolean member 'frozen'.
Instead of adding more booleans, replace it by an enumeration member
'status' with values 'active' and 'frozen'. Then add new value
'disabled'.
Incompatible change. Fine because the changed part hasn't been
released so far.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Bogus image may have a large total_sectors that will overflow the
multiplication. For cleanness, fix the return code so the error message
will be meaningful.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The following sequence
int fd = open(argv[1], O_RDWR | O_CREAT | O_DIRECT, 0644);
for (i = 0; i < 100000; i++)
write(fd, buf, 4096);
performs 5% better if buf is aligned to 4096 bytes.
The difference is quite reliable.
On the other hand we do not want at the moment to enforce bounce
buffering if guest request is aligned to 512 bytes.
The patch changes default bounce buffer optimal alignment to
MAX(page size, 4k). 4k is chosen as maximal known sector size on real
HDD.
The justification of the performance improve is quite interesting.
From the kernel point of view each request to the disk was split
by two. This could be seen by blktrace like this:
9,0 11 1 0.000000000 11151 Q WS 312737792 + 1023 [qemu-img]
9,0 11 2 0.000007938 11151 Q WS 312738815 + 8 [qemu-img]
9,0 11 3 0.000030735 11151 Q WS 312738823 + 1016 [qemu-img]
9,0 11 4 0.000032482 11151 Q WS 312739839 + 8 [qemu-img]
9,0 11 5 0.000041379 11151 Q WS 312739847 + 1016 [qemu-img]
9,0 11 6 0.000042818 11151 Q WS 312740863 + 8 [qemu-img]
9,0 11 7 0.000051236 11151 Q WS 312740871 + 1017 [qemu-img]
9,0 5 1 0.169071519 11151 Q WS 312741888 + 1023 [qemu-img]
After the patch the pattern becomes normal:
9,0 6 1 0.000000000 12422 Q WS 314834944 + 1024 [qemu-img]
9,0 6 2 0.000038527 12422 Q WS 314835968 + 1024 [qemu-img]
9,0 6 3 0.000072849 12422 Q WS 314836992 + 1024 [qemu-img]
9,0 6 4 0.000106276 12422 Q WS 314838016 + 1024 [qemu-img]
and the amount of requests sent to disk (could be calculated counting
number of lines in the output of blktrace) is reduced about 2 times.
Both qemu-img and qemu-io are affected while qemu-kvm is not. The guest
does his job well and real requests comes properly aligned (to page).
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1431441056-26198-3-git-send-email-den@openvz.org
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The patch introduces new concept: minimal memory alignment for bounce
buffers. Original so called "optimal" value is actually minimal required
value for aligment. It should be used for validation that the IOVec
is properly aligned and bounce buffer is not required.
Though, from the performance point of view, it would be better if
bounce buffer or IOVec allocated by QEMU will be aligned stricter.
The patch does not change any alignment value yet.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1431441056-26198-2-git-send-email-den@openvz.org
CC: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The block.c file has grown to over 6000 lines. It is time to split this
file so there are fewer conflicts and the code is easier to maintain.
Extract I/O request processing code:
* Read
* Write
* Zero writes and making the image empty
* Flush
* Discard
* ioctl
* Tracked requests and queuing
* Throttling and copy-on-read
* Block status and allocated functions
* Refreshing block limits
* Reading/writing vmstate
* qemu_blockalign() and friends
The patch simply moves code from block.c into block/io.c.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the code to install coroutine and aio emulation function pointers
in a BlockDriver to its own function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The dirty bitmap functions are called from the block I/O processing
code. Make them visible to block_int.h users so they can be used
outside block.c.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bdrv_states list is a static variable in block.c.
bdrv_drain_all() and bdrv_flush_all() use this variable to iterate over
all drives.
The next patch will move bdrv_drain_all() and bdrv_flush_all() out of
block.c so it's necessary to switch to the public bdrv_next() interface.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-16-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We often don't need the BlockDriverState for functions
that operate on bitmaps. Remove it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-15-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-14-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the "frozen" status booleans, to inform clients
when a bitmap is occupied doing a task.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1429314609-29776-13-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add bdrv_clear_dirty_bitmap and a matching QMP command,
qmp_block_dirty_bitmap_clear that enables a user to reset
the bitmap attached to a drive.
This allows us to reset a bitmap in the event of a full
drive backup.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1429314609-29776-12-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For "dirty-bitmap" sync mode, the block job will iterate through the
given dirty bitmap to decide if a sector needs backup (backup all the
dirty clusters and skip clean ones), just as allocation conditions of
"top" sync mode.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-11-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A bitmap successor is an anonymous BdrvDirtyBitmap that is intended to
be created just prior to a sensitive operation (e.g. Incremental Backup)
that can either succeed or fail, but during the course of which we still
want a bitmap tracking writes.
On creating a successor, we "freeze" the parent bitmap which prevents
its deletion, enabling, anonymization, or creating a bitmap with the
same name.
On success, the parent bitmap can "abdicate" responsibility to the
successor, which will inherit its name. The successor will have been
tracking writes during the course of the backup operation. The parent
will be safely deleted.
On failure, we can "reclaim" the successor from the parent, unifying
them such that the resulting bitmap describes all writes occurring since
the last successful backup, for instance. Reclamation will thaw the
parent, but not explicitly re-enable it.
BdrvDirtyBitmap operations that target a single bitmap are protected
by assertions that the bitmap is not frozen and/or disabled.
BdrvDirtyBitmap operations that target a group of bitmaps, such as
bdrv_{set,reset}_dirty will ignore frozen/disabled drives with a
conditional instead.
Internal functions that enable/disable dirty bitmaps have assertions
added to them to prevent modifying frozen bitmaps.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1429314609-29776-10-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a status indicating the enabled/disabled state of the bitmap.
A bitmap is by default enabled, but you can lock the bitmap into
a read-only state by setting disabled = true.
A previous version of this patch added a QMP interface for changing
the state of the bitmap, but it has since been removed for now until
a use case emerges where this state must be revealed to the user.
The disabled state WILL be used internally for bitmap migration and
bitmap persistence.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-9-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This returns the granularity (in bytes) of dirty bitmap,
which matches the QMP interface and the existing query
interface.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new command pair is added to manage a user created dirty bitmap. The
dirty bitmap's name is mandatory and must be unique for the same device,
but different devices can have bitmaps with the same names.
The granularity is an optional field. If it is not specified, we will
choose a default granularity based on the cluster size if available,
clamped to between 4K and 64K to mirror how the 'mirror' code was
already choosing granularity. If we do not have cluster size info
available, we choose 64K. This code has been factored out into a helper
shared with block/mirror.
This patch also introduces the 'block_dirty_bitmap_lookup' helper,
which takes a device name and a dirty bitmap name and validates the
lookup, returning NULL and setting errp if there is a problem with
either field. This helper will be re-used in future patches in this
series.
The types added to block-core.json will be re-used in future patches
in this series, see:
'qapi: Add transaction support to block-dirty-bitmap-{add, enable, disable}'
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1429314609-29776-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We treat this field with a variety of different types everywhere
in the code. Now it's just uint32_t.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This field will be set for user created dirty bitmap. Also pass in an
error pointer to bdrv_create_dirty_bitmap, so when a name is already
taken on this BDS, it can report an error message. This is not global
check, two BDSes can have dirty bitmap with a common name.
Implemented bdrv_find_dirty_bitmap to find a dirty bitmap by name, will
be used later when other QMP commands want to reference dirty bitmap by
name.
Add bdrv_dirty_bitmap_make_anon. This unsets the name of dirty bitmap.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The image field in BlockDeviceInfo is supposed to contain an ImageInfo
object. However that is being filled in by bdrv_query_info(), not by
bdrv_block_device_info(), which is where BlockDeviceInfo is actually
created.
Anyone calling bdrv_block_device_info() directly will get a null image
field. As a consequence of this, the HMP command 'info block -n -v'
crashes QEMU.
This patch moves the code that fills in that field from
bdrv_query_info() to bdrv_block_device_info().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 1429271563-3765-1-git-send-email-berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are several error messages that identify a BlockDriverState by
its device name. However those errors can be produced in nodes that
don't have a device name associated.
In those cases we should use bdrv_get_device_or_node_name() to fall
back to the node name and produce a more meaningful message. The
messages are also updated to use the more generic term 'node' instead
of 'device'.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 9823a1f0514fdb0692e92868661c38a9e00a12d6.1428485266.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function gets the device name associated with a BlockDriverState,
or its node name if the device name is empty.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 4fa30aa8d61d9052ce266fd5429a59a14e941255.1428485266.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_aio_* APIs can use coroutines to achieve asynchronicity. However,
the coroutine may terminate without having yielded back to the caller
(for example because of something that invokes a nested event loop,
or because the coroutine is doing nothing at all). In this case,
the bdrv_aio_* API must delay the completion to the next iteration
of the main loop, because bdrv_aio_* will never invoke the callback
before returning.
This can be done with a bottom half, and indeed bdrv_aio_* is always
using one for simplicity. It is possible to gain some performance
(~3%) by avoiding this in the common case. A new field in the
BlockAIOCBCoroutine struct is set to true until the first time the
corotine has yielded to its creator, and completion goes through a
new function bdrv_co_complete. If the flag is false, bdrv_co_complete
invokes the callback immediately. If it is true, the caller will
notice that the coroutine has completed and schedule the bottom
half itself.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427524638-28157-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is necessary to suppress more IO requests from being generated from
block job coroutines.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1428069921-2957-3-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, throttle timers won't make any progress when VCPU is not
running, which would stall the request queue in utils, qtest, vm
suspending, and live migration, without special handling.
Block jobs are confusingly inconsistent between with and without
throttling: if user sets a bps limit, stops the vm, then start a block
job, the block job will not make any progress; in contrary, if user
unsets the bps limit, or if it's not set, the block job will run
normally.
After this patch, with the host clock, even if the VCPUs are stopped,
the throttle queues will be processed.
This patch also enables potential to add throttle to bdrv_drain_all.
Currently all requests are drained immediately. In other words whenever
it is called, IO throttling goes ineffective (examples: system reset,
migration and many block job operations.). This is a loophole that guest
could exploit. If we use the host clock, we can later just trust the
nested poll. This could be done on top.
Note that for qemu-iotests case 093, which uses qtest, we still keep vm
clock so the script can control the clock stepping in order to be
deterministic.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1427268446-6426-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit was generated mechanically by coccinelle from the following
semantic patch:
@@
expression val;
@@
- (ffs(val) - 1)
+ ctz32(val)
The call sites have been audited to ensure the ffs(0) - 1 == -1 case
never occurs (due to input validation, asserts, etc). Therefore we
don't need to worry about the fact that ctz32(0) == 32.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-5-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the zero write is not aligned, bdrv_co_do_pwritev will segfault
because of accessing to the NULL qiov passed in by bdrv_co_write_zeroes.
Fix this by allocating a local qiov in bdrv_co_do_pwritev if the request
is not aligned. (In this case the padding iovs are necessary anyway, so
it doesn't hurt.)
Also add a check at the end of bdrv_co_do_pwritev to clear the zero flag
if padding is involved.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1427160230-4489-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
All callers are converted, so drop it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1425296209-1476-5-git-send-email-famz@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We've steered users away from QCOW/QCOW2 encryption for a while,
because it's a flawed design (commit 136cd19 Describe flaws in
qcow/qcow2 encryption in the docs).
In addition to flawed crypto, we have comically bad usability, and
plain old bugs. Let me show you.
= Example images =
I'm going to use a raw image as backing file, and two QCOW2 images,
one encrypted, and one not:
$ qemu-img create -f raw backing.img 4m
Formatting 'backing.img', fmt=raw size=4194304
$ qemu-img create -f qcow2 -o encryption,backing_file=backing.img,backing_fmt=raw geheim.qcow2 4m
Formatting 'geheim.qcow2', fmt=qcow2 size=4194304 backing_file='backing.img' backing_fmt='raw' encryption=on cluster_size=65536 lazy_refcounts=off
$ qemu-img create -f qcow2 -o backing_file=backing.img,backing_fmt=raw normal.qcow2 4m
Formatting 'normal.qcow2', fmt=qcow2 size=4194304 backing_file='backing.img' backing_fmt='raw' encryption=off cluster_size=65536 lazy_refcounts=off
= Usability issues =
== Confusing startup ==
When no image is encrypted, and you don't give -S, QEMU starts the
guest immediately:
$ qemu-system-x86_64 -nodefaults -display none -monitor stdio normal.qcow2
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) info status
VM status: running
But as soon as there's an encrypted image in play, the guest is *not*
started, with no notification whatsoever:
$ qemu-system-x86_64 -nodefaults -display none -monitor stdio geheim.qcow2
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) info status
VM status: paused (prelaunch)
If the user figured out that he needs to type "cont" to enter his
keys, the confusion enters the next level: "cont" asks for at most
*one* key. If more are needed, it then silently does nothing. The
user has to type "cont" once per encrypted image:
$ qemu-system-x86_64 -nodefaults -display none -monitor stdio -drive if=none,file=geheim.qcow2 -drive if=none,file=geheim.qcow2
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) info status
VM status: paused (prelaunch)
(qemu) c
none0 (geheim.qcow2) is encrypted.
Password: ******
(qemu) info status
VM status: paused (prelaunch)
(qemu) c
none1 (geheim.qcow2) is encrypted.
Password: ******
(qemu) info status
VM status: running
== Incorrect passwords not caught ==
All existing encryption schemes give you the GIGO treatment: garbage
password in, garbage data out. Guests usually refuse to mount
garbage, but other usage is prone to data loss.
== Need to stop the guest to add an encrypted image ==
$ qemu-system-x86_64 -nodefaults -display none -monitor stdio
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) info status
VM status: running
(qemu) drive_add "" if=none,file=geheim.qcow2
Guest must be stopped for opening of encrypted image
(qemu) stop
(qemu) drive_add "" if=none,file=geheim.qcow2
OK
Commit c3adb58 added this restriction. Before, we could expose images
lacking an encryption key to guests, with potentially catastrophic
results. See also "Use without key is not always caught".
= Bugs =
== Use without key is not always caught ==
Encrypted images can be in an intermediate state "opened, but no key".
The weird startup behavior and the need to stop the guest are there to
ensure the guest isn't exposed to that state. But other things still
are!
* drive_backup
$ qemu-system-x86_64 -nodefaults -display none -monitor stdio geheim.qcow2
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) drive_backup -f ide0-hd0 out.img raw
Formatting 'out.img', fmt=raw size=4194304
I guess this writes encrypted data to raw image out.img. Good luck
with figuring out how to decrypt that again.
* commit
$ qemu-system-x86_64 -nodefaults -display none -monitor stdio geheim.qcow2
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) commit ide0-hd0
I guess this writes encrypted data into the unencrypted raw backing
image, effectively destroying it.
== QMP device_add of usb-storage fails when it shouldn't ==
When the image is encrypted, device_add creates the device, defers
actually attaching it to when the key becomes available, then fails.
This is wrong. device_add must either create the device and succeed,
or do nothing and fail.
$ qemu-system-x86_64 -nodefaults -display none -usb -qmp stdio -drive if=none,id=foo,file=geheim.qcow2
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}}
{ "execute": "qmp_capabilities" }
{"return": {}}
{ "execute": "device_add", "arguments": { "driver": "usb-storage", "id": "bar", "drive": "foo" } }
{"error": {"class": "DeviceEncrypted", "desc": "'foo' (geheim.qcow2) is encrypted"}}
{"execute":"device_del","arguments": { "id": "bar" } }
{"timestamp": {"seconds": 1426003440, "microseconds": 237181}, "event": "DEVICE_DELETED", "data": {"path": "/machine/peripheral/bar/bar.0/legacy[0]"}}
{"timestamp": {"seconds": 1426003440, "microseconds": 238231}, "event": "DEVICE_DELETED", "data": {"device": "bar", "path": "/machine/peripheral/bar"}}
{"return": {}}
This stuff is worse than useless, it's a trap for users.
If people become sufficiently interested in encrypted images to
contribute a cryptographically sane implementation for QCOW2 (or
whatever other format), then rewriting the necessary support around it
from scratch will likely be easier and yield better results than
fixing up the existing mess.
Let's deprecate the mess now, drop it after a grace period, and move
on.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add driver functions for geometry and blocksize detection
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424087278-49393-2-git-send-email-tumanova@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
img_convert() and img_amend() use qemu_opts_do_parse(), which reports
errors with qerror_report_err(). Its error messages aren't helpful
here, the caller reports one that actually makes sense. Reproducer:
$ qemu-img convert -o backing_format=raw in.img out.img
qemu-img: Invalid parameter 'backing_format'
qemu-img: Invalid options for file format 'raw'
To fix, propagate errors through qemu_opts_do_parse(). This lifts the
error reporting into callers. Drop it from img_convert() and
img_amend(), keep it in qemu_chr_parse_compat(), bdrv_img_create().
Since I'm touching qemu_opts_do_parse() anyway, write a function
comment for it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().
Most of its users assume the function can't fail. Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.
Just two users remain, in util/qemu-config.c. Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
bdrv_img_create() uses qemu_opt_set(), which reports errors with
qerror_report_err(). Its error messages aren't helpful here, the
caller reports one that actually makes sense. I don't know how to
trigger the error conditions, though.
Switch to qemu_opt_set_err() to get rid of the unwanted messages.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Return the Error object instead of reporting it with
qerror_report_err().
Change callers that assume the function can't fail to pass
&error_abort, so that should the assumption ever break, it'll break
noisily.
Turns out all callers outside its unit test assume that. We could
drop the Error ** argument, but that would make the interface less
regular, so don't.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Do not throw away the value returned by bdrv_check_request() and
bdrv_check_byte_request().
Fix up some coding style issues in the proximity of the affected hunks.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1423162705-32065-17-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that request clamping is done in the BlockBackend, the "growable"
field can be removed from the BlockDriverState. All BDSs are now treated
as being "growable" (that is, they are allowed to grow; they are not
necessarily actually able to).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-16-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The argument given to bdrv_find_protocol() is just a file name, which
makes it difficult for the caller to reconstruct what protocol
bdrv_find_protocol() was hoping to find. This patch adds an Error
parameter to that function to solve this issue.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1423162705-32065-4-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The QERR_ macros are leftovers from the days of "rich" error objects.
They're used with error_set() and qerror_report(), and expand into the
first *two* arguments. This trickiness has become pointless. Clean
up QERR_DEVICE_ENCRYPTED and QERR_DEVICE_NOT_ENCRYPTED.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1422524221-8566-5-git-send-email-armbru@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1422524221-8566-4-git-send-email-armbru@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
we check and adjust request sizes at several places with
sometimes inconsistent checks or default values:
INT_MAX
INT_MAX >> BDRV_SECTOR_BITS
UINT_MAX >> BDRV_SECTOR_BITS
SIZE_MAX >> BDRV_SECTOR_BITS
This patches introdocues a macro for the maximal allowed sectors
per request and uses it at several places.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
do not trim requests if the driver does not supply a limit
through BlockLimits. For write zeroes we still keep a limit
for the unsupported path to avoid allocating a big bounce buffer.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As Stefan pointed out, the variable 'filename' in bdrv_commit is unused,
despite being maintained in previous patches.
With this patch, get rid of the variable for good.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Like BLOCK_OP_TYPE_BACKUP_SOURCE and BLOCK_OP_TYPE_BACKUP_TARGET,
block-commit involves two asymmetric devices.
This change is not user-visible (yet), because commit only works with
device names.
But once we enable backing reference in blockdev-add, or specifying
node-name in block-commit command, we don't want the user to start two
commit jobs on the same backing chain, which will corrupt things because
of the final bdrv_swap.
Before we have per category blockers, splitting this type is still
better.
[Resolved virtio-blk dataplane conflict by replacing
BLOCK_OP_TYPE_COMMIT with both BLOCK_OP_TYPE_COMMIT_{SOURCE, TARGET}.
They are safe since the block job runs in the same AioContext as the
dataplane IOThread.
--Stefan]
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If bs->bl.max_write_zeroes is large and we end up in the unsupported
path we might allocate a lot of memory for the iovector and/or even
generate an oversized requests.
Fix this by limiting the request by the minimum of the reported
maximum transfer size or 16MB (32768 sectors).
Reported-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-id: 1420457389-16332-1-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Mirror and migration use dirty bitmaps for their purposes, and since
commit [block: per caller dirty bitmap] they use their own bitmaps, not
the global one. But they use old functions bdrv_set_dirty and
bdrv_reset_dirty, which change all dirty bitmaps.
Named dirty bitmaps series by Fam and Snow are affected: mirroring and
migration will spoil all (not related to this mirroring or migration)
named dirty bitmaps.
This patch fixes this by adding bdrv_set_dirty_bitmap and
bdrv_reset_dirty_bitmap, which change concrete bitmap. Also, to prevent
such mistakes in future, old functions bdrv_(set,reset)_dirty are made
static, for internal block usage.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@parallels.com>
CC: John Snow <jsnow@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: Denis V. Lunev <den@openvz.org>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417081246-3593-1-git-send-email-vsementsov@parallels.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Relative backing filenames are always relative to the backed image's
directory; the same applies to image creation. Therefore, if the backing
file has to be opened for determining its size (in case the size has not
been explicitly specified) its filename should be interpreted relative
to the new image's base directory and not relative to qemu's working
directory.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When using a relative backing file name, qemu needs to know the
directory of the top image file. For JSON filenames, such a directory
cannot be easily determined (e.g. how do you determine the directory of
a qcow2 BDS directly on top of a quorum BDS?). Therefore, do not allow
relative filenames for the backing file of BDSs only having a JSON
filename.
Furthermore, BDS::exact_filename should be used whenever possible. If
BDS::filename is not equal to BDS::exact_filename, the former will
always be a JSON object.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce bdrv_get_full_backing_filename_from_filename(), a function
which takes the name of the backed file and a potentially relative
backing filename to produce the full (absolute) backing filename.
Use this function from bdrv_get_full_backing_filename().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most reads do not go past the end of the file, and they can use the
input QEMUIOVector instead of creating one. This removes the
qemu_iovec_* functions from the profile.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change the message printing code to output a separator for each option
string before it instead of after, then we don't one more extra ' ' in
the end.
To update qemu-iotests output files, most of the times one would just
copy the *.out.bad to *.out. With this change we will not have the
space disliked by checkpatch.pl.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1418110684-19528-3-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If vmdk blindly tries to use path_combine() using bs->file->filename as
the base file name, this will result in a bad error message for JSON
file names when calling bdrv_open(). It is better to only try
bs->file->exact_filename; if that is empty, bs->file->filename will be
useless for path_combine() and an error should be emitted (containing
bs->file->filename because desc_file_path (which is
bs->file->exact_filename) is empty).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417615043-26174-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If a driver supports image creation, it needs to set the .create_opts
field. We can use that to make sure .create_opts for both drivers
involved is not NULL in bdrv_img_create(), which is important so that
the create_opts pointer in that function is not NULL after the
qemu_opts_append() calls and when going into qemu_opts_create().
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We can always assume raw, file and qcow2 being available; so do not use
bdrv_find_format() to locate their BlockDriver objects but statically
reference the respective objects.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a qcow2 image specifies a backing file format that doesn't correspond
to any format driver that qemu knows, we shouldn't fall back to probing,
but simply error out.
Not looking up the backing file driver in bdrv_open_backing_file(), but
just filling in the "driver" option if it isn't there moves us closer to
the goal of having everything in QDict options and gets us the error
handling of bdrv_open(), which correctly refuses unknown drivers.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416935562-7760-4-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the user neglects to specify the image format, QEMU probes the
image to guess it automatically, for convenience.
Relying on format probing is insecure for raw images (CVE-2008-2004).
If the guest writes a suitable header to the device, the next probe
will recognize a format chosen by the guest. A malicious guest can
abuse this to gain access to host files, e.g. by crafting a QCOW2
header with backing file /etc/shadow.
Commit 1e72d3b (April 2008) provided -drive parameter format to let
users disable probing. Commit f965509 (March 2009) extended QCOW2 to
optionally store the backing file format, to let users disable backing
file probing. QED has had a flag to suppress probing since the
beginning (2010), set whenever a raw backing file is assigned.
All of these additions that allow to avoid format probing have to be
specified explicitly. The default still allows the attack.
In order to fix this, commit 79368c8 (July 2010) put probed raw images
in a restricted mode, in which they wouldn't be able to overwrite the
first few bytes of the image so that they would identify as a different
image. If a write to the first sector would write one of the signatures
of another driver, qemu would instead zero out the first four bytes.
This patch was later reverted in commit 8b33d9e (September 2010) because
it didn't get the handling of unaligned qiov members right.
Today's block layer that is based on coroutines and has qiov utility
functions makes it much easier to get this functionality right, so this
patch implements it.
The other differences of this patch to the old one are that it doesn't
silently write something different than the guest requested by zeroing
out some bytes (it fails the request instead) and that it doesn't
maintain a list of signatures in the raw driver (it calls the usual
probe function instead).
Note that this change doesn't introduce new breakage for false positive
cases where the guest legitimately writes data into the first sector
that matches the signatures of an image format (e.g. for nested virt):
These cases were broken before, only the failure mode changes from
corruption after the next restart (when the wrong format is probed) to
failing the problematic write request.
Also note that like in the original patch, the restrictions only apply
if the image format has been guessed by probing. Explicitly specifying a
format allows guests to write anything they like.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1416497234-29880-8-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The only image format driver that even potentially accesses anything
after 512 bytes in its bdrv_probe() implementation is VMDK, which reads
a plain-text descriptor file. In practice, the field it's looking for
seems to come first and will be well within the first 512 bytes, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416497234-29880-7-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416497234-29880-6-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This returns the node name of a BDS. Remove the TODO comment and expect
the callers to be explicit.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Similar to bdrv_next, this traverses through graph_bdrv_states. Will be
useful to enumerate all the named nodes.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In bdrv_rw_co we report -EINVAL for nb_sectors > INT_MAX /
BDRV_SECTOR_SIZE, so a caller shouldn't exceed it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1415603264-21497-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJUYh9vAAoJEL7lnXSkw9fbgPQH/065L5+SpaJR1Nte9Lz3N2s1
a6tGSI22yu85tKvYCdYjeoVHSkSTyR57FdTfUd2xc2QPj+J4sWXpA81KILBGTJUp
NMpmLpWg4LOh8Ek4ViRgmFFdryzIFa4dT4gc1AcSAIAQ6jsgK1dM7m5kfncC3TN0
TUs248vJ2i/DaE0k8TOeJqxJTqInoFttlJEqG7RD+V5JznokE4zpFNXHDGx9BptE
W2J38GJ/TKRPe9UrHMKZI1r6+ZBdXyE/CaqsNNKLJdqrHgSQuAyK/PS6dQbM4BLg
M1qdP7Tp0wOlvv9qoEZMOEiUsi54XPqLgaLMbW74Yp5X459fqmLW2imy49pHXt8=
=klsW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2014-11-11' into staging
trivial patches for 2014-11-11
# gpg: Signature made Tue 11 Nov 2014 14:38:39 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2014-11-11:
block: Fix comment for bdrv_co_get_block_status
sysbus: Correct SYSTEM_BUS(obj) defines
target-i386: cpu: keeping function parameters alignment on new line
xen-hvm: Remove redundant variable 'xstate'
coroutine-sigaltstack: Change jmp_buf to sigjmp_buf
pc-bios: petalogix-s3adsp1800.dtb: Use 'xlnx, xps-ethernetlite-2.00.a' instead of 'xlnx, xps-ethernetlite-2.00.b'
gdbstub: Add a missing case of signal number translation in gdbstub
numa: make 'info numa' take into account hotplugged memory
slirp/smbd: modify/set several parameters in generated smbd.conf
qemu-doc.texi: fix typos in x509 examples
icc_bus: fix typo ICC_BRIGDE -> ICC_BRIDGE
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It returns more information than binary, fix the comment.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If the specified backing file could not be opened, do not generate a new
error message which contains the message which has been generated by
bdrv_open(), but just propagate the latter.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The mirror block job must run in the BlockDriverState AioContext so that
it works with dataplane.
Acquire the AioContext in blockdev.c so starting the block job is safe.
Note that to_replace is treated separately from other BlockDriverStates
in that it does not need to be in the same AioContext. Explicitly
acquire/release to_replace's AioContext when accessing it.
The completion code in block/mirror.c must perform BDS graph
manipulation and bdrv_reopen() from the main loop. Use
block_job_defer_to_main_loop() to achieve that.
The bdrv_drain_all() call is not allowed outside the main loop since it
could lead to lock ordering problems. Use bdrv_drain(bs) instead
because we have acquired the AioContext so nothing else can sneak in
I/O.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-10-git-send-email-stefanha@redhat.com
Now that op blockers are in use, we can ensure that no other sources are
generating I/O on a BlockDriverState. Therefore it is possible to drain
requests for a single BDS.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1413889440-32577-7-git-send-email-stefanha@redhat.com
Depending on the changed options and the image format,
bdrv_amend_options() may take a significant amount of time. In these
cases, a way to be informed about the operation's status is desirable.
Since the operation is rather complex and may fundamentally change the
image, implementing it as AIO or a coroutine does not seem feasible. On
the other hand, implementing it as a block job would be significantly
more difficult than a simple callback and would not add benefits other
than progress report to the amending operation, because it should not
actually be run as a block job at all.
A callback may not be very pretty, but it's very easy to implement and
perfectly fits its purpose here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1414404776-4919-2-git-send-email-mreitz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The local variable 'ac' in send_qmp_error_event() is declared with the
wrong type, which causes clang to complain when it is initialized
and again when it is used:
block.c:3655:20: warning: implicit conversion from enumeration type 'enum IoOperationType' to different enumeration type 'BlockErrorAction' (aka 'enum BlockErrorAction') [-Wenum-conversion]
ac = is_read ? IO_OPERATION_TYPE_READ : IO_OPERATION_TYPE_WRITE;
~ ^~~~~~~~~~~~~~~~~~~~~~
block.c:3655:45: warning: implicit conversion from enumeration type 'enum IoOperationType' to different enumeration type 'BlockErrorAction' (aka 'enum BlockErrorAction') [-Wenum-conversion]
ac = is_read ? IO_OPERATION_TYPE_READ : IO_OPERATION_TYPE_WRITE;
~ ^~~~~~~~~~~~~~~~~~~~~~~
block.c:3656:62: warning: implicit conversion from enumeration type 'BlockErrorAction' (aka 'enum BlockErrorAction') to different enumeration type 'IoOperationType' (aka 'enum IoOperationType') [-Wenum-conversion]
qapi_event_send_block_io_error(bdrv_get_device_name(bs), ac, action,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^~
Correct the type to IoOperationType, and rename the variable
to 'optype' to match its correct type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Message-id: 1412969583-21045-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When falling through to the underlying file in
bdrv_co_get_block_status(), if it returns that the query offset is
beyond the file end (by setting *pnum to 0), return the range to be
zero and do not let the number of sectors for which information could be
obtained be overwritten.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These functions call their non-0-counterparts and then fill the
allocated buffer with 0 (if the allocation has been successful).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move device model attachment / detachment and the BlockDevOps device
model callbacks and their wrappers from BlockDriverState to
BlockBackend.
Wrapper calls in block.c change from
bdrv_dev_FOO_cb(bs, ...)
to
if (bs->blk) {
bdrv_dev_FOO_cb(bs->blk, ...);
}
No change, because both bdrv_dev_change_media_cb() and
bdrv_dev_resize_cb() do nothing when no device model is attached, and
a device model can be attached only when bs->blk.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use it with block backends shortly, and the name is going to fit
badly there. It's a block layer thing anyway, not just a block driver
thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there. It's a block layer thing anyway, not just a
block driver thing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockBackend's name space is separate only to keep the initial patches
simple. Time to merge the two.
Retain bdrv_find() and bdrv_get_device_name() for now, to keep this
series manageable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
device_name[] can become non-empty only in bdrv_new_root() and
bdrv_move_feature_fields(). The latter is used only to undo damage
done by bdrv_swap(). The former is called only by blk_new_with_bs().
Therefore, when a BlockDriverState's device_name[] is non-empty, then
it's been created with a BlockBackend, and vice versa. Furthermore,
blk_new_with_bs() keeps the two names equal.
Therefore, device_name[] is redundant. Eliminate it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
