Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200717105426.51134-4-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For Linux block devices, being able to open the device read-write
doesn't necessarily mean that the device is actually writable (one
example is a read-only LV, as you get with lvchange -pr <device>). We
have check_hdev_writable() to check this condition and fail opening the
image read-write if it's not actually writable.
However, this check doesn't take auto-read-only into account, but
results in a hard failure instead of downgrading to read-only where
possible.
Fix this and do the writable check not based on BDRV_O_RDWR, but only
when this actually results in opening the file read-write. A second
check is inserted in raw_reconfigure_getfd() to have the same check when
dynamic auto-read-only upgrades an image file from read-only to
read-write.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200717105426.51134-3-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We'll need to call it in raw_open_common(), so move the function to
avoid a forward declaration.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200717105426.51134-2-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit a6b257a08e ('file-posix: Handle undetectable alignment'),
we assume that if we open a file with O_DIRECT and alignment probing
returns 1, we just couldn't find out the real alignment requirement
because some filesystems make the requirement only for allocated blocks.
In this case, a safe default of 4k is used.
This is too strict for NFS, which does actually allow byte-aligned
requests even with O_DIRECT. Because we can't distinguish both cases
with generic code, let's just look at the file system magic and disable
s->needs_alignment for NFS. This way, O_DIRECT can still be used on NFS
for images that are not aligned to 4k.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200716142601.111237-3-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The vxhs code doesn't compile since v2.12.0. There's no point in fixing
and then adding CI for a config that our users have demonstrated that
they do not use; better to just remove it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200711065926.2204721-1-marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- file-posix: Mitigate file fragmentation with extent size hints
- Tighten qemu-img rules on missing backing format
- qemu-img map: Don't limit block status request size
- Fix crash with virtio-scsi and iothreads
-----BEGIN PGP SIGNATURE-----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=DB0q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- file-posix: Mitigate file fragmentation with extent size hints
- Tighten qemu-img rules on missing backing format
- qemu-img map: Don't limit block status request size
- Fix crash with virtio-scsi and iothreads
# gpg: Signature made Tue 14 Jul 2020 14:24:19 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
block: Avoid stale pointer dereference in blk_get_aio_context()
qemu-img: Deprecate use of -b without -F
block: Add support to warn on backing file change without format
iotests: Specify explicit backing format where sensible
qcow2: Deprecate use of qemu-img amend to change backing file
block: Error if backing file fails during creation without -u
qcow: Tolerate backing_fmt=
vmdk: Add trivial backing_fmt support
sheepdog: Add trivial backing_fmt support
block: Finish deprecation of 'qemu-img convert -n -o'
qemu-img: Flush stdout before before potential stderr messages
file-posix: Mitigate file fragmentation with extent size hints
iotests/059: Filter out disk size with more standard filter
qemu-img map: Don't limit block status request size
iotests: Simplify _filter_img_create() a bit
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is possible for blk_remove_bs() to race with blk_drain_all(), causing
the latter to dereference a stale blk->root pointer:
blk_remove_bs(blk)
bdrv_root_unref_child(blk->root)
child_bs = blk->root->bs
bdrv_detach_child(blk->root)
...
g_free(blk->root) <============== blk->root becomes stale
bdrv_unref(child_bs) <============ yield at some point
A blk_drain_all() can be triggered by some guest action in the
meantime, eg. on POWER, SLOF might disable bus mastering on
a virtio-scsi-pci device:
virtio_write_config()
virtio_pci_stop_ioeventfd()
virtio_bus_stop_ioeventfd()
virtio_scsi_dataplane_stop()
blk_drain_all()
blk_get_aio_context()
bs = blk->root ? blk->root->bs : NULL
^^^^^^^^^
stale
Then, depending on one's luck, QEMU either crashes with SEGV or
hits the assertion in blk_get_aio_context().
blk->root is set by blk_insert_bs() which calls bdrv_root_attach_child()
first. The blk_remove_bs() function should rollback the changes made
by blk_insert_bs() in the opposite order (or it should be documented
somewhere why this isn't the case). Clear blk->root before calling
bdrv_root_unref_child() in blk_remove_bs().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159430264541.389456.11925072456012783045.stgit@bahia.lan>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, this is a mechanical addition; all callers pass false. But
the next patch will use it to improve 'qemu-img rebase -u' when
selecting a backing file with no format.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Message-Id: <20200706203954.341758-10-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The use of 'qemu-img amend' to change qcow2 backing files is not
tested very well. In particular, our implementation has a bug where
if a new backing file is provided without a format, then the prior
format is blindly reused, even if this results in data corruption, but
this is not caught by iotests.
There are also situations where amending other options needs access to
the original backing file (for example, on a downgrade to a v2 image,
knowing whether a v3 zero cluster must be allocated or may be left
unallocated depends on knowing whether the backing file already reads
as zero), but the command line does not have a nice way to tell us
both the backing file to use for opening the image as well as the
backing file to install after the operation is complete.
Even if we do allow changing the backing file, it is redundant with
the existing ability to change backing files via 'qemu-img rebase -u'.
It is time to deprecate this support (leaving the existing behavior
intact, even if it is buggy), and at a point in the future, require
the use of only 'qemu-img rebase' for adjusting backing chain
relations, saving 'qemu-img amend' for changes unrelated to the
backing chain.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-8-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow has no space in the metadata to store a backing format, and there
are existing qcow images backed both by raw or by other formats
(usually qcow) images, reliant on probing to tell the difference. On
the bright side, because we probe every time, raw files are marked as
probed and we thus forbid a commit action into the backing file where
guest-controlled contents could change the result of the probe next
time around (the iotest added here proves that).
Still, allowing the user to specify the backing format during
creation, even if we can't record it, is a good thing. This patch
blindly allows any value that resolves to a known driver, even if the
user's request is a mismatch from what probing finds; then the next
patch will further enhance things to verify that the user's request
matches what we actually probe. With this and the next patch in
place, we will finally be ready to deprecate the creation of images
where a backing format was not explicitly specified by the user.
Note that this is only for QemuOpts usage; there is no change to the
QAPI to allow a format through -blockdev.
Add a new iotest 301 just for qcow, to demonstrate the latest
behavior, and to make it easier to show the improvements made in the
next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-6-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vmdk already requires that if backing_file is present, that it be
another vmdk image (see vmdk_co_do_create). Meanwhile, we want to
move towards always being explicit about the backing format for other
drivers where it matters. So for convenience, make qemu-img create -F
vmdk work, while rejecting all other explicit formats (note that this
is only for QemuOpts usage; there is no change to the QAPI to allow a
format through -blockdev).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-5-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sheepdog already requires that if backing_file is present, that it be
another sheepdog image (see sd_co_create). Meanwhile, we want to move
towards always being explicit about the backing format for other
drivers where it matters. So for convenience, make qemu-img create -F
sheepdog work, while rejecting all other explicit formats (note that
this is only for QemuOpts usage; there is no change to the QAPI to
allow a format through -blockdev).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-4-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Especially when O_DIRECT is used with image files so that the page cache
indirection can't cause a merge of allocating requests, the file will
fragment on the file system layer, with a potentially very small
fragment size (this depends on the requests the guest sent).
On Linux, fragmentation can be reduced by setting an extent size hint
when creating the file (at least on XFS, it can't be set any more after
the first extent has been allocated), basically giving raw files a
"cluster size" for allocation.
This adds a create option to set the extent size hint, and changes the
default from not setting a hint to setting it to 1 MB. The main reason
why qcow2 defaults to smaller cluster sizes is that COW becomes more
expensive, which is not an issue with raw files, so we can choose a
larger size. The tradeoff here is only potentially wasted disk space.
For qcow2 (or other image formats) over file-posix, the advantage should
even be greater because they grow sequentially without leaving holes, so
there won't be wasted space. Setting even larger extent size hints for
such images may make sense. This can be done with the new option, but
let's keep the default conservative for now.
The effect is very visible with a test that intentionally creates a
badly fragmented file with qemu-img bench (the time difference while
creating the file is already remarkable) and then looks at the number of
extents and the time a simple "qemu-img map" takes.
Without an extent size hint:
$ ./qemu-img create -f raw -o extent_size_hint=0 ~/tmp/test.raw 10G
Formatting '/home/kwolf/tmp/test.raw', fmt=raw size=10737418240 extent_size_hint=0
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 0
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 0, step size 8192)
Run completed in 25.848 seconds.
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 4096
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 4096, step size 8192)
Run completed in 19.616 seconds.
$ filefrag ~/tmp/test.raw
/home/kwolf/tmp/test.raw: 2000000 extents found
$ time ./qemu-img map ~/tmp/test.raw
Offset Length Mapped to File
0 0x1e8480000 0 /home/kwolf/tmp/test.raw
real 0m1,279s
user 0m0,043s
sys 0m1,226s
With the new default extent size hint of 1 MB:
$ ./qemu-img create -f raw -o extent_size_hint=1M ~/tmp/test.raw 10G
Formatting '/home/kwolf/tmp/test.raw', fmt=raw size=10737418240 extent_size_hint=1048576
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 0
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 0, step size 8192)
Run completed in 11.833 seconds.
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 4096
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 4096, step size 8192)
Run completed in 10.155 seconds.
$ filefrag ~/tmp/test.raw
/home/kwolf/tmp/test.raw: 178 extents found
$ time ./qemu-img map ~/tmp/test.raw
Offset Length Mapped to File
0 0x1e8480000 0 /home/kwolf/tmp/test.raw
real 0m0,061s
user 0m0,040s
sys 0m0,014s
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200707142329.48303-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When snprintf returns the same value as the buffer size, the final
byte was truncated to ensure a NUL terminator. Fortunately, such long
export names are unusual enough, with no real impact other than what
is displayed to the user.
Fixes: 5c86bdf120
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200622210355.414941-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
When an I/O request failed, now we only return correct
value on scsi check condition. We should also have a
default errno such as -EIO in other case.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20200701105444.3226-2-xieyongji@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The handling of check condition was incorrect because
we would only do it after retries exceed maximum.
Fixes: 8c460269aa ("iscsi: base all handling of check condition on scsi_sense_to_errno")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20200701105444.3226-1-xieyongji@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we want to check error after errp-function call, we need to
introduce local_err and then propagate it to errp. Instead, use
the ERRP_GUARD() macro, benefits are:
1. No need of explicit error_propagate call
2. No need of explicit local_err variable: use errp directly
3. ERRP_GUARD() leaves errp as is if it's not NULL or
&error_fatal, this means that we don't break error_abort
(we'll abort on error_set, not on error_propagate)
If we want to add some info to errp (by error_prepend() or
error_append_hint()), we must use the ERRP_GUARD() macro.
Otherwise, this info will not be added when errp == &error_fatal
(the program will exit prior to the error_append_hint() or
error_prepend() call). Fix several such cases, e.g. in nbd_read().
This commit is generated by command
sed -n '/^Network Block Device (NBD)$/,/^$/{s/^F: //p}' \
MAINTAINERS | \
xargs git ls-files | grep '\.[hc]$' | \
xargs spatch \
--sp-file scripts/coccinelle/errp-guard.cocci \
--macro-file scripts/cocci-macro-file.h \
--in-place --no-show-diff --max-width 80
Reported-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200707165037.1026246-8-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and
auto-propagated-errp.cocci to errp-guard.cocci. Commit message
tweaked again.]
When migrate_add_blocker(blocker, &errp) is followed by
error_propagate(errp, err), we can often just as well do
migrate_add_blocker(..., errp).
Do that with this Coccinelle script:
@@
expression blocker, err, errp;
expression ret;
@@
- ret = migrate_add_blocker(blocker, &err);
- if (err) {
+ ret = migrate_add_blocker(blocker, errp);
+ if (ret < 0) {
... when != err;
- error_propagate(errp, err);
...
}
@@
expression blocker, err, errp;
@@
- migrate_add_blocker(blocker, &err);
- if (err) {
+ if (migrate_add_blocker(blocker, errp) < 0) {
... when != err;
- error_propagate(errp, err);
...
}
Double-check @err is not used afterwards. Dereferencing it would be
use after free, but checking whether it's null would be legitimate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-43-armbru@redhat.com>
Convert
visit_type_FOO(v, ..., &ptr, &err);
...
if (err) {
...
}
to
visit_type_FOO(v, ..., &ptr, errp);
...
if (!ptr) {
...
}
for functions that set @ptr to non-null / null on success / error.
Eliminate error_propagate() that are now unnecessary. Delete @err
that are now unused.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-40-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-39-armbru@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away, even when we need to keep error_propagate() for other
error paths.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-38-armbru@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. The previous two commits did that for sufficiently simple
cases with Coccinelle. Do it for several more manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-37-armbru@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. The previous commit did that with a Coccinelle script I
consider fairly trustworthy. This commit uses the same script with
the matching of return taken out, i.e. we convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
}
to
if (!foo(..., errp)) {
...
...
}
This is unsound: @err could still be read between afterwards. I don't
know how to express "no read of @err without an intervening write" in
Coccinelle. Instead, I manually double-checked for uses of @err.
Suboptimal line breaks tweaked manually. qdev_realize() simplified
further to placate scripts/checkpatch.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-36-armbru@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
Replace
error_setg(&err, ...);
error_propagate(errp, err);
by
error_setg(errp, ...);
Related pattern:
if (...) {
error_setg(&err, ...);
goto out;
}
...
out:
error_propagate(errp, err);
return;
When all paths to label out are that way, replace by
if (...) {
error_setg(errp, ...);
return;
}
and delete the label along with the error_propagate().
When we have at most one other path that actually needs to propagate,
and maybe one at the end that where propagation is unnecessary, e.g.
foo(..., &err);
if (err) {
goto out;
}
...
bar(..., &err);
out:
error_propagate(errp, err);
return;
move the error_propagate() to where it's needed, like
if (...) {
foo(..., &err);
error_propagate(errp, err);
return;
}
...
bar(..., errp);
return;
and transform the error_setg() as above.
In some places, the transformation results in obviously unnecessary
error_propagate(). The next few commits will eliminate them.
Bonus: the elimination of gotos will make later patches in this series
easier to review.
Candidates for conversion tracked down with this Coccinelle script:
@@
identifier err, errp;
expression list args;
@@
- error_setg(&err, args);
+ error_setg(errp, args);
... when != err
error_propagate(errp, err);
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-34-armbru@redhat.com>
The previous commit used Coccinelle to convert from checking the Error
object to checking the return value. Convert a few more manually.
Also tweak control flow in places to conform to the conventional "if
error bail out" pattern.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-20-armbru@redhat.com>
The previous commit enables conversion of
visit_foo(..., &err);
if (err) {
...
}
to
if (!visit_foo(..., errp)) {
...
}
for visitor functions that now return true / false on success / error.
Coccinelle script:
@@
identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*";
expression list args;
typedef Error;
Error *err;
@@
- fun(args, &err);
- if (err)
+ if (!fun(args, &err))
{
...
}
A few line breaks tidied up manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-19-armbru@redhat.com>
Convert uses like
opts = qemu_opts_create(..., &err);
if (err) {
...
}
to
opts = qemu_opts_create(..., errp);
if (!opts) {
...
}
Eliminate error_propagate() that are now unnecessary. Delete @err
that are now unused.
Note that we can't drop parallels_open()'s error_propagate() here. We
continue to execute it even in the converted case. It's a no-op then:
local_err is null.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200707160613.848843-8-armbru@redhat.com>
The other four drivers that support backing files (qcow, qcow2,
parallels, vmdk) all rely on the block layer to populate zeroes when
reading beyond EOF of a short backing file. We can simplify the qed
code by doing likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200528094405.145708-11-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently this field only set by qed and qcow2. But in fact, all
backing-supporting formats (parallels, qcow, qcow2, qed, vmdk) share
these semantics: on unallocated blocks, if there is no backing file they
just memset the buffer with zeroes.
So, document this behavior for .supports_backing and drop
.unallocated_blocks_are_zero
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528094405.145708-10-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
vhdx doesn't have .bdrv_co_block_status handler, so DATA|ALLOCATED is
always assumed for it in bdrv_co_block_status().
unallocated_blocks_are_zero is useless (it doesn't affect the only user
of the field: bdrv_co_block_status()), drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528094405.145708-9-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
raw_co_block_status() in block/file-posix.c never returns 0, so
unallocated_blocks_are_zero is useless (it doesn't affect the only user
of the field: bdrv_co_block_status()). Drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528094405.145708-8-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We set bdi->unallocated_blocks_are_zero = iscsilun->lbprz, but
iscsi_co_block_status doesn't return 0 in case of iscsilun->lbprz, it
returns ZERO when appropriate. So actually unallocated_blocks_are_zero
is useless (it doesn't affect the only user of the field:
bdrv_co_block_status()). Drop it now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528094405.145708-7-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It's false by default, no needs to set it. We are going to drop this
variable at all, so drop it now here, it doesn't hurt.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528094405.145708-6-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In case when get_image_offset() returns -1, we do zero out the
corresponding chunk of qiov. So, this should be reported as ZERO.
Note that this changes visible output of "qemu-img map --output=json"
and "qemu-io -c map" commands. For qemu-img map, the change is obvious:
we just mark as zero what is really zero. For qemu-io it's less
obvious: what was unallocated now is allocated.
There is an inconsistency in understanding of unallocated regions in
Qemu: backing-supporting format-drivers return 0 block-status to report
go-to-backing logic for this area. Some protocol-drivers (iscsi) return
0 to report fs-unallocated-non-zero status (i.e., don't occupy space on
disk, read result is undefined).
BDRV_BLOCK_ALLOCATED is defined as something more close to
go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from
iscsi is treated as unallocated. It doesn't influence backing-chain
behavior, as iscsi can't have backing file. But it does influence
"qemu-io -c map".
We should solve this inconsistency at some future point. Now, let's
just make backing-not-supporting format drivers (vdi in the previous
patch and vpc now) to behave more like backing-supporting drivers
and not report 0 block-status. More over, returning ZERO status is
absolutely valid thing, and again, corresponds to how the other
format-drivers (backing-supporting) work.
After block-status update, it never reports 0, so setting
unallocated_blocks_are_zero doesn't make sense (as the only user of it
is bdrv_co_block_status and it checks unallocated_blocks_are_zero only
for unallocated areas). Drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528094405.145708-5-vsementsov@virtuozzo.com>
[mreitz: qemu-io -c map as used by iotest 146 now reports everything as
allocated; in order to make the test do something useful, we
use qemu-img map --output=json now]
Signed-off-by: Max Reitz <mreitz@redhat.com>
In case of !VDI_IS_ALLOCATED[], we do zero out the corresponding chunk
of qiov. So, this should be reported as ZERO.
Note that this changes visible output of "qemu-img map --output=json"
and "qemu-io -c map" commands. For qemu-img map, the change is obvious:
we just mark as zero what is really zero. For qemu-io it's less
obvious: what was unallocated now is allocated.
There is an inconsistency in understanding of unallocated regions in
Qemu: backing-supporting format-drivers return 0 block-status to report
go-to-backing logic for this area. Some protocol-drivers (iscsi) return
0 to report fs-unallocated-non-zero status (i.e., don't occupy space on
disk, read result is undefined).
BDRV_BLOCK_ALLOCATED is defined as something more close to
go-to-backing logic. Still it is calculated as ZERO | DATA, so 0 from
iscsi is treated as unallocated. It doesn't influence backing-chain
behavior, as iscsi can't have backing file. But it does influence
"qemu-io -c map".
We should solve this inconsistency at some future point. Now, let's
just make backing-not-supporting format drivers (vdi at this patch and
vpc with the following) to behave more like backing-supporting drivers
and not report 0 block-status. More over, returning ZERO status is
absolutely valid thing, and again, corresponds to how the other
format-drivers (backing-supporting) work.
After block-status update, it never reports 0, so setting
unallocated_blocks_are_zero doesn't make sense (as the only user of it
is bdrv_co_block_status and it checks unallocated_blocks_are_zero only
for unallocated areas). Drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528094405.145708-4-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The function has only one user: bdrv_co_block_status(). Inline it to
simplify reviewing of the following patches, which will finally drop
unallocated_blocks_are_zero field too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528094405.145708-3-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently the implementation only supports amending the encryption
options, unlike the qemu-img version
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608094030.670121-14-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608094030.670121-13-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
blockdev-amend will be used similiar to blockdev-create
to allow on the fly changes of the structure of the format based block devices.
Current plan is to first support encryption keyslot management for luks
based formats (raw and embedded in qcow2)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200608094030.670121-12-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that we have all the infrastructure in place,
wire it in the qcow2 driver and expose this to the user.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608094030.670121-9-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This implements the encryption key management using the generic code in
qcrypto layer and exposes it to the user via qemu-img
This code adds another 'write_func' because the initialization
write_func works directly on the underlying file, and amend
works on instance of luks device.
This commit also adds a 'hack/workaround' I and Kevin Wolf (thanks)
made to make the driver both support write sharing (to avoid breaking the users),
and be safe against concurrent metadata update (the keyslots)
Eventually the write sharing for luks driver will be deprecated
and removed together with this hack.
The hack is that we ask (as a format driver) for BLK_PERM_CONSISTENT_READ
and then when we want to update the keys, we unshare that permission.
So if someone else has the image open, even readonly, encryption
key update will fail gracefully.
Also thanks to Daniel Berrange for the idea of
unsharing read, rather that write permission which allows
to avoid cases when the other user had opened the image read-only.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608094030.670121-8-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
rename the write_func to create_write_func, and init_func to create_init_func.
This is preparation for other write_func that will be used to update the encryption keys.
No functional changes
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200608094030.670121-7-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some qcow2 create options can't be used for amend.
Remove them from the qcow2 create options and add generic logic to detect
such options in qemu-img
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[mreitz: Dropped some iotests reference output hunks that became
unnecessary thanks to
"iotests: Make _filter_img_create more active"]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200625125548.870061-12-mreitz@redhat.com>
Some options are only useful for creation
(or hard to be amended, like cluster size for qcow2), while some other
options are only useful for amend, like upcoming keyslot management
options for luks
Since currently only qcow2 supports amend, move all its options
to a common macro and then include it in each action option list.
In future it might be useful to remove some options which are
not supported anyway from amend list, which currently
cause an error message if amended.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608094030.670121-5-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
'force' option will be used for some unsafe amend operations.
This includes things like erasing last keyslot in luks based formats
(which destroys the data, unless the master key is backed up
by external means), but that _might_ be desired result.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608094030.670121-4-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will be used first to implement luks keyslot management.
block_crypto_amend_opts_init will be used to convert
qemu-img cmdline to QCryptoBlockAmendOptions
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200608094030.670121-2-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When resizing an image with qcow2_co_truncate() using the falloc or
full preallocation modes the code assumes that both the old and new
sizes are cluster-aligned.
There are two problems with this:
1) The calculation of how many clusters are involved does not always
get the right result.
Example: creating a 60KB image and resizing it (with
preallocation=full) to 80KB won't allocate the second cluster.
2) No copy-on-write is performed, so in the previous example if
there is a backing file then the first 60KB of the first cluster
won't be filled with data from the backing file.
This patch fixes both issues.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200617140036.20311-1-berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
ret may be > 0 on success path at this point. Fix assertion, which may
crash currently.
Fixes: 4ce5dd3e9b
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200526181347.489557-1-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
array_remove_slice() calls array_roll() with array->next - 1 as the
destination index. This is only correct for count == 1, otherwise we're
writing past the end of the array. array->next - count would be correct.
However, this is the only place ever calling array_roll(), so this
rather complicated operation isn't even necessary.
Fix the problem and simplify the code by replacing it with a single
memmove() call. array_roll() can now be removed.
Reported-by: Nathan Huckleberry <nhuck15@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200623175534.38286-3-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
FAT allows only a restricted set of characters in file names, and for
some of the illegal characters, it's actually important that we catch
them: If filenames can contain '/', the guest can construct filenames
containing "../" and escape from the assigned vvfat directory. The same
problem could arise if ".." was ever accepted as a literal filename.
Fix this by adding a check that all filenames are valid in
check_directory_consistency().
Reported-by: Nathan Huckleberry <nhuck15@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200623175534.38286-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEMU block drivers are supposed to support aio_poll() from I/O
completion callback functions. This means completion processing must be
re-entrant.
The standard approach is to schedule a BH during completion processing
and cancel it at the end of processing. If aio_poll() is invoked by a
callback function then the BH will run. The BH continues the suspended
completion processing.
All of this means that request A's cb() can synchronously wait for
request B to complete. Previously the nvme block driver would hang
because it didn't process completions from nested aio_poll().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200617132201.1832152-8-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Passing around both BDRVNVMeState and NVMeQueuePair is unwieldy. Reduce
the number of function arguments by keeping the BDRVNVMeState pointer in
NVMeQueuePair. This will come in handly when a BH is introduced in a
later patch and only one argument can be passed to it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200617132201.1832152-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There are three issues with the current NVMeRequest->busy field:
1. The busy field is accidentally accessed outside q->lock when request
submission fails.
2. Waiters on free_req_queue are not woken when a request is returned
early due to submission failure.
2. Finding a free request involves scanning all requests. This makes
request submission O(n^2).
Switch to an O(1) freelist that is always accessed under the lock.
Also differentiate between NVME_QUEUE_SIZE, the actual SQ/CQ size, and
NVME_NUM_REQS, the number of usable requests. This makes the code
simpler than using NVME_QUEUE_SIZE everywhere and having to keep in mind
that one slot is reserved.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200617132201.1832152-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Do not access a CQE after incrementing q->cq.head and releasing q->lock.
It is unlikely that this causes problems in practice but it's a latent
bug.
The reason why it should be safe at the moment is that completion
processing is not re-entrant and the CQ doorbell isn't written until the
end of nvme_process_completion().
Make this change now because QEMU expects completion processing to be
re-entrant and later patches will do that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200617132201.1832152-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A lot of CPU time is spent simply locking/unlocking q->lock during
polling. Check for completion outside the lock to make q->lock disappear
from the profile.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200617132201.1832152-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For now, we don't have persistent bitmaps in any other formats, but
that might not be true in the future. Make it obvious that our
incoming parameter is not necessarily a qcow2 image, and therefore is
limited to just the bdrv_dirty_bitmap_* API calls (rather than probing
into qcow2 internals).
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200608190821.3293867-1-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rather than listing block/monitor from the top-level Makefile.objs, we
should instead list monitor from block/Makefile.objs.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Fixes: bb4e58c613
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200608173339.3244211-1-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 93676c88 relaxed our NBD client code to request export names up
to the NBD protocol maximum of 4096 bytes without NUL terminator, even
though the block layer can't store anything longer than 4096 bytes
including NUL terminator for display to the user. Since this means
there are some export names where we have to truncate things, we can
at least try to make the truncation a bit more obvious for the user.
Note that in spite of the truncated display name, we can still
communicate with an NBD server using such a long export name; this was
deemed nicer than refusing to even connect to such a server (since the
server may not be under our control, and since determining our actual
length limits gets tricky when nbd://host:port/export and
nbd+unix:///export?socket=/path are themselves variable-length
expansions beyond the export name but count towards the block layer
name length).
Reported-by: Xueqiang Wei <xuwei@redhat.com>
Fixes: https://bugzilla.redhat.com/1843684
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200610163741.3745251-3-eblake@redhat.com>
We have a few bdrv_*() functions that can either spawn a new coroutine
and wait for it with BDRV_POLL_WHILE() or use a fastpath if they are
alreeady running in a coroutine. All of them duplicate basically the
same code.
Factor the common code into a new function bdrv_run_co().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20200520144901.16589-1-vsementsov@virtuozzo.com
[Factor out bdrv_run_co_entry too]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In qemu_luring_poll_cb() we are not using the cqe peeked from the
CQ ring. We are using io_uring_peek_cqe() only to see if there
are cqes ready, so we can replace it with io_uring_cq_ready().
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20200519134942.118178-1-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As recently documented [1], io_uring_enter(2) syscall can return an
error (errno=EINTR) if the operation was interrupted by a delivery
of a signal before it could complete.
This should happen when IORING_ENTER_GETEVENTS flag is used, for
example during io_uring_submit_and_wait() or during io_uring_submit()
when IORING_SETUP_IOPOLL is enabled.
We shouldn't have this problem for now, but it's better to prevent it.
[1] 344355ec66
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20200519133041.112138-1-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It's useful to know how much space can be occupied by qcow2 persistent
bitmaps, even though such metadata is unrelated to the guest-visible
data. Report this value as an additional QMP field, present when
measuring an existing image and output format that both support
bitmaps. Update iotest 178 and 190 to updated output, as well as new
coverage in 190 demonstrating non-zero values made possible with the
recently-added qemu-img bitmap command (see 3b51ab4b).
The new 'bitmaps size:' field is displayed automatically as part of
'qemu-img measure' any time it is present in QMP (that is, any time
both the source image being measured and destination format support
bitmaps, even if the measurement is 0 because there are no bitmaps
present). If the field is absent, it means that no bitmaps can be
copied (source, destination, or both lack bitmaps, including when
measuring based on size rather than on a source image). This behavior
is compatible with an upcoming patch adding 'qemu-img convert
--bitmaps': that command will fail in the same situations where this
patch omits the field.
The addition of a new field demonstrates why we should always
zero-initialize qapi C structs; while the qcow2 driver still fully
populates all fields, the raw and crypto drivers had to be tweaked to
avoid uninitialized data.
Consideration was also given towards having a 'qemu-img measure
--bitmaps' which errors out when bitmaps are not possible, and
otherwise sums the bitmaps into the existing allocation totals rather
than displaying as a separate field, as a potential convenience
factor. But this was ultimately decided to be more complexity than
necessary when the QMP interface was sufficient enough with bitmaps
remaining a separate field.
See also: https://bugzilla.redhat.com/1779904
Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200521192137.1120211-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
To be used for bitmap migration in further commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200521220648.3255-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Upcoming patches want to add some basic bitmap manipulation abilities
to qemu-img. But blockdev.o is too heavyweight to link into qemu-img
(among other things, it would drag in block jobs and transaction
support - qemu-img does offline manipulation, where atomicity is less
important because there are no concurrent modifications to compete
with), so it's time to split off the bare bones of what we will need
into a new file block/monitor/bitmap-qmp-cmds.o.
This is sufficient to expose 6 QMP commands for use by qemu-img (add,
remove, clear, enable, disable, merge), as well as move the three
helper functions touched in the previous patch. Regarding
MAINTAINERS, the new file is automatically part of block core, but
also makes sense as related to other dirty bitmap files.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513011648.166876-6-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Upcoming patches will enhance bitmap support in qemu-img, but in doing
so, it turns out to be nice to suppress output when persistent bitmaps
make no sense (such as on a qcow2 v2 image). Add a hook to make this
easier to query.
This patch adds a new callback .bdrv_supports_persistent_dirty_bitmap,
rather than trying to shoehorn the answer in via existing callbacks.
In particular, while it might have been possible to overload
.bdrv_co_can_store_new_dirty_bitmap to special-case a NULL input to
answer whether any persistent bitmaps are supported, that is at odds
with whether a particular bitmap can be stored (for example, even on
an image that supports persistent bitmaps but has currently filled up
the maximum number of bitmaps, attempts to store another one should
fail); and the new functionality doesn't require coroutine safety.
Similarly, we could have added one more piece of information to
.bdrv_get_info, but then again, most callers to that function tend to
already discard extraneous information, and making it a catch-all
rather than a series of dedicated scalar queries hasn't really
simplified life.
In the future, when we improve the ability to look up bitmaps through
a filter, we will probably also want to teach the block layer to
automatically let filters pass this request on through.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513011648.166876-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
block_copy_do_copy() is static, only used in block_copy_task_entry
with the error_is_read argument set. No need to check for it,
simplify.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200507121129.29760-3-philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix when building with -Os:
CC block/block-copy.o
block/block-copy.c: In function ‘block_copy_task_entry’:
block/block-copy.c:428:38: error: ‘error_is_read’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
428 | t->call_state->error_is_read = error_is_read;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200507121129.29760-2-philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Implementations should decide the necessary permissions based on @role.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-35-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These calls have no real use for the child role yet, but it will not
harm to give one.
Notably, the bdrv_root_attach_child() call in blockjob.c is left
unmodified because there is not much the generic BlockJob object wants
from its children.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-34-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_default_perms() can decide which permission profile to use based on
the BdrvChildRole, so block drivers do not need to select it explicitly.
The blkverify driver now no longer shares the WRITE permission for the
image to verify. We thus have to adjust two places in
test-block-iothread not to take it. (Note that in theory, blkverify
should behave like quorum in this regard and share neither WRITE nor
RESIZE for both of its children. In practice, it does not really
matter, because blkverify is used only for debugging, so we might as
well keep its permissions rather liberal.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-30-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace child_file by child_of_bds in all remaining places (excluding
tests).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-28-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Note that some filters have secondary children, namely blkverify (the
image to be verified) and blklogwrites (the log). This patch does not
touch those children.
Note that for blkverify, the filtered child should not be format-probed.
While there is nothing enforcing this here, in practice, it will not be:
blkverify implements .bdrv_file_open. The block layer ensures (and in
fact, asserts) that BDRV_O_PROTOCOL is set for every BDS whose driver
implements .bdrv_file_open. This flag will then be bequeathed to
blkverify's children, and they will thus (by default) not be probed
either.
("By default" refers to the fact that blkverify's other child (the
non-filtered one) will have BDRV_O_PROTOCOL force-unset, because that is
what happens for all non-filtered children of non-format drivers.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-27-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commonly, they need to pass the BDRV_CHILD_IMAGE set as the
BdrvChildRole; but there are exceptions for drivers with external data
files (qcow2 and vmdk).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-26-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make all parents of backing files pass the appropriate BdrvChildRole.
By doing so, we can switch their BdrvChildClass over to the generic
child_of_bds, which will do the right thing when given a correct
BdrvChildRole.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-24-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Both users (quorum and blkverify) use child_format for
not-really-filtered children, so the appropriate BdrvChildRole in both
cases is DATA. (Note that this will cause bdrv_inherited_options() to
force-allow format probing.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-22-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Split raw_read_options() into one function that actually just reads the
options, and another that applies them. This will allow us to detect
whether the user has specified any options before attaching the file
child (so we can decide on its role based on the options).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-21-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We plan to unify the generic .inherit_options() functions. The
resulting common function will need to decide whether to force-enable
format probing, force-disable it, or leave it as-is. To make this
decision, it will need to know whether the parent node is a format node
or not (because we never want format probing if the parent is a format
node already (except for the backing chain)).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-9-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, all callers (effectively) pass 0 and no callee evaluates thie
value. Later patches will change both.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-8-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, all callers pass 0 and no callee evaluates this value. Later
patches will change both.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-7-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, it is always set to 0. Later patches in this series will
ensure that all callers pass an appropriate combination of flags.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-6-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This structure nearly only contains parent callbacks for child state
changes. It cannot really reflect a child's role, because different
roles may overlap (as we will see when real roles are introduced), and
because parents can have custom callbacks even when the child fulfills a
standard role.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200513110544.176672-4-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to unify child_format and child_file at some point. One of the
important things that set format drivers apart from other drivers is
that they do not expect other format nodes under them (except in the
backing chain), i.e. we must not probe formats inside of formats. That
means we need something on which to distinguish format drivers from
others, and hence this flag.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200513110544.176672-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The commit, mirror, and blkreplay block nodes are filters, so they should
be marked as such.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513110544.176672-2-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200429141126.85159-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is just a bandaid to keep tests/test-replication working after
bdrv_make_empty() starts to assert that we're not trying to call it on a
read-only child.
For the real solution in the future, replication should not steal the
BdrvChild from its backing file (this is never correct to do!), but
instead have its own child node references, with the appropriate
permissions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_commit() already has a BlockBackend pointing to the BDS that we
want to empty, it just has the wrong permissions.
qemu-img commit has no BlockBackend pointing to the old backing file
yet, but introducing one is simple.
After this commit, bdrv_make_empty() is the only remaining caller of
BlockDriver.bdrv_make_empty().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200429141126.85159-5-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[kwolf: Fixed up reference output for 098]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Two callers of BlockDriver.bdrv_make_empty() remain that should not call
this method directly. Both do not have access to a BdrvChild, but they
can use a BlockBackend, so we add this function that lets them use it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200429141126.85159-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If qemu in colo secondary mode is stopped, it crashes because
s->backup_job is canceled twice: First with job_cancel_sync_all()
in qemu_cleanup() and then in replication_stop().
Fix this by assigning NULL to s->backup_job when the job completes
so replication_stop() and replication_do_checkpoint() won't touch
the job.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Message-Id: <20200511090801.7ed5d8f3@luklap>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the target is shorter than the source, mirror would copy data until
it reaches the end of the target and then fail with an I/O error when
trying to write past the end.
If the target is longer than the source, the mirror job would complete
successfully, but the target wouldn't actually be an accurate copy of
the source image (it would contain some additional garbage at the end).
Fix this by checking that both images have the same size when the job
starts.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200511135825.219437-4-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
Obviously, we should g_free the task after trace point and offset
update.
Reported-by: Coverity (CID 1428756)
Fixes: 4ce5dd3e9b
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200507183800.22626-1-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
zstd significantly reduces cluster compression time.
It provides better compression performance maintaining
the same level of the compression ratio in comparison with
zlib, which, at the moment, is the only compression
method available.
The performance test results:
Test compresses and decompresses qemu qcow2 image with just
installed rhel-7.6 guest.
Image cluster size: 64K. Image on disk size: 2.2G
The test was conducted with brd disk to reduce the influence
of disk subsystem to the test results.
The results is given in seconds.
compress cmd:
time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd]
src.img [zlib|zstd]_compressed.img
decompress cmd
time ./qemu-img convert -O qcow2
[zlib|zstd]_compressed.img uncompressed.img
compression decompression
zlib zstd zlib zstd
------------------------------------------------------------
real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %)
user 65.0 15.8 5.3 2.5
sys 3.3 0.2 2.0 2.0
Both ZLIB and ZSTD gave the same compression ratio: 1.57
compressed image size in both cases: 1.4G
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-4-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The patch enables processing the image compression type defined
for the image and chooses an appropriate method for image clusters
(de)compression.
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200507082521.29210-3-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that there are no clients of bdrv_has_zero_init_truncate, none of
the drivers need to worry about providing it.
What's more, this eliminates a source of some confusion: a literal
reading of the documentation as written in ceaca56f and implemented in
commit 1dcaf527 claims that a driver which returns 0 for
bdrv_has_zero_init_truncate() must not return 1 for
bdrv_has_zero_init(); this condition was violated for parallels, qcow,
and sometimes for vdi, although in practice it did not matter since
those drivers also lacked .bdrv_co_truncate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-10-eblake@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The vhdx driver uses truncation for image growth, with a special case
for blocks that already read as zero but which are only being
partially written. But with a bit of rearranging, it's just as easy
to defer the decision on whether truncation resulted in zeroes to the
actual allocation attempt, reducing the number of places that still
use bdrv_has_zero_init_truncate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-9-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The parallels driver tries to use truncation for image growth, but can
only do so when reads are guaranteed as zero. Now that we have a way
to request zero contents from truncation, we can defer the decision to
actual allocation attempts rather than up front, reducing the number
of places that still use bdrv_has_zero_init_truncate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-8-eblake@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Our .bdrv_has_zero_init_truncate can detect when the remote side
always zero fills; we can reuse that same knowledge to implement
BDRV_REQ_ZERO_WRITE by ignoring it when the server gives it to us for
free.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-7-eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Our .bdrv_has_zero_init_truncate always returns 1 because sheepdog
always 0-fills; we can use that same knowledge to implement
BDRV_REQ_ZERO_WRITE by ignoring it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-6-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Our .bdrv_has_zero_init_truncate always returns 1 because rbd always
0-fills; we can use that same knowledge to implement
BDRV_REQ_ZERO_WRITE by ignoring it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-5-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Our .bdrv_has_zero_init_truncate returns 1 if we detect that the OS
always 0-fills; we can use that same knowledge to implement
BDRV_REQ_ZERO_WRITE by ignoring it when the OS gives it to us for
free.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-4-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When using bdrv_file, .bdrv_has_zero_init_truncate always returns 1;
therefore, we can behave just like file-posix, and always implement
BDRV_REQ_ZERO_WRITE by ignoring it since the OS gives it to us for
free (note that file-posix.c had to use an 'if' because it shared code
between regular files and block devices, but in file-win32.c,
bdrv_host_device uses a separate .bdrv_file_open).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-3-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block.c already defaults to 0 if we don't provide a callback; there's
no need to write a callback that always fails.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200428202905.770727-2-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Calling bdrv_getlength() to get the pre-truncate file size will not
really work on block devices, because they have always the same length,
and trying to write beyond it will fail with a rather cryptic error
message.
Instead, we should use qcow2_get_last_cluster() and bdrv_getlength()
only as a fallback.
Before this patch:
$ truncate -s 1G test.img
$ sudo losetup -f --show test.img
/dev/loop0
$ sudo qemu-img create -f qcow2 -o preallocation=full /dev/loop0 64M
Formatting '/dev/loop0', fmt=qcow2 size=67108864 cluster_size=65536
preallocation=full lazy_refcounts=off refcount_bits=16
qemu-img: /dev/loop0: Could not resize image: Failed to resize refcount
structures: No space left on device
With this patch:
$ sudo qemu-img create -f qcow2 -o preallocation=full /dev/loop0 64M
Formatting '/dev/loop0', fmt=qcow2 size=67108864 cluster_size=65536
preallocation=full lazy_refcounts=off refcount_bits=16
qemu-img: /dev/loop0: Could not resize image: Failed to resize
underlying file: Preallocation mode 'full' unsupported for this
non-regular file
So as you can see, it still fails, but now the problem is missing
support on the block device level, so we at least get a better error
message.
Note that we cannot preallocate block devices on truncate by design,
because we do not know what area to preallocate. Their length is always
the same, the truncate operation does not change it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200505141801.1096763-1-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since the introduction of a backup filter node in commit 00e30f05d, the
backup block job crashes when the target image is smaller than the
source image because it will try to write after the end of the target
node without having BLK_PERM_RESIZE. (Previously, the BlockBackend layer
would have caught this and errored out gracefully.)
We can fix this and even do better than the old behaviour: Check that
source and target have the same image size at the start of the block job
and unshare BLK_PERM_RESIZE. (This permission was already unshared
before the same commit 00e30f05d, but the BlockBackend that was used to
make the restriction was removed without a replacement.) This will
immediately error out when starting the job instead of only when writing
to a block that doesn't exist in the target.
Longer target than source would technically work because we would never
write to blocks that don't exist, but semantically these are invalid,
too, because a backup is supposed to create a copy, not just an image
that starts with a copy.
Fixes: 00e30f05de
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1778593
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430142755.315494-4-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_get_device_name() will be an empty string with modern management
tools that don't use -drive. Use bdrv_get_device_or_node_name() instead
so that the node name is used if the BlockBackend is anonymous.
While at it, start with upper case to make the message consistent with
the rest of the function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200430142755.315494-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we have a backup L2 table, we currently flush once after writing to
the active L2 table and again after writing to the backup table. A
single flush is enough and makes things a little less slow.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430133007.170335-6-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a cluster is already zeroed, we don't have to call vmdk_L2update(),
which is rather slow because it flushes the image file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430133007.170335-5-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When overwriting a zero cluster, we must not perform copy-on-write from
the backing file, but from a zeroed buffer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430133007.170335-4-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
m_data must contain valid data even for zero clusters when no cluster
was allocated in the image file. Without this, zero writes segfault with
images that have zeroed_grain=on.
For zero writes, we don't want to allocate a cluster in the image file
even in compressed files.
Fixes: 524089bce4
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430133007.170335-3-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
m_data is used for zero clusters even though valid == 0. It really only
means that a new cluster was allocated in the image file. Rename it to
reflect this.
While at it, change it from int to bool, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430133007.170335-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After commit f01643fb8b when an image is
extended and BDRV_REQ_ZERO_WRITE is set then the new clusters are
zeroized.
The code however does not detect correctly situations when the old and
the new end of the image are within the same cluster. The problem can
be reproduced with these steps:
qemu-img create -f qcow2 backing.qcow2 1M
qemu-img create -f qcow2 -F qcow2 -b backing.qcow2 top.qcow2
qemu-img resize --shrink top.qcow2 520k
qemu-img resize top.qcow2 567k
In the last step offset - zero_start causes an integer wraparound.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200504155217.10325-1-berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently if you attampt to create too large file with luks you
get the following error message:
Formatting 'test.luks', fmt=luks size=17592186044416 key-secret=sec0
qemu-img: test.luks: Could not resize file: File too large
While for raw format the error message is
qemu-img: test.img: The image size is too large for file format 'raw'
The reason for this is that qemu-img checks for errono of the failure,
and presents the later error when it is -EFBIG
However crypto generic code 'swallows' the errno and replaces it
with -EIO.
As an attempt to make it better, we can make luks driver,
detect -EFBIG and in this case present a better error message,
which is what this patch does
The new error message is:
qemu-img: error creating test.luks: The requested file size is too large
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1534898
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
- reduce client-side fragmentation of NBD trim and status requests
- fix iotest 41 when run in deep tree
- fix socket activation in qemu-nbd
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAl6whTUACgkQp6FrSiUn
Q2r4nAf7BtGSFMkUu6nWYeq+Ggg+Xwmz2FLAzWTK/rccGDC44c9ETzOIbWEddo6X
FHpU07VXdLW1h2M7ox8lQVo0DZEFxTRBYTPtUtjB7izfkAs4CkYeElJsZAPAZKgU
GsKqa3RM6uXubsQaXXXjMFCGlYgqi1dVkmkgtPebt7evSe0ATlTfYfd0y9gb5f9C
cbHD3CVcGKQe4ZtNcSBpTzOvXJSrBZznyCyhBO2qmVXTynt/5Ygog+Ulq3DHZsPX
UkRkTPohKA0BhXuS7wD49danlzCLiTlvswr62fAncM1+AJTbmIa+apy3SwiOkwMh
Aawq5vDtaFV+HEBKbMC0QRhgtoEe1w==
=ExlI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2020-05-04' into staging
nbd patches for 2020-05-04
- reduce client-side fragmentation of NBD trim and status requests
- fix iotest 41 when run in deep tree
- fix socket activation in qemu-nbd
# gpg: Signature made Mon 04 May 2020 22:12:21 BST
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2020-05-04:
block/nbd-client: drop max_block restriction from discard
block/nbd-client: drop max_block restriction from block_status
iotests/041: Fix NBD socket path
tools: Fix use of fcntl(F_SETFD) during socket activation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
-----BEGIN PGP SIGNATURE-----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=ibgH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging
trivial patches (20200504)
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
# gpg: Signature made Mon 04 May 2020 16:45:18 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-for-5.1-pull-request:
hw/timer/pxa2xx_timer: Add assertion to silent static analyzer warning
hw/timer/stm32f2xx_timer: Remove dead assignment
hw/gpio/aspeed_gpio: Remove dead assignment
hw/isa/i82378: Remove dead assignment
hw/ide/sii3112: Remove dead assignment
hw/input/adb-kbd: Remove dead assignment
hw/i2c/pm_smbus: Remove dead assignment
blockdev: Remove dead assignment
block: Avoid dead assignment
Compress lines for immediate return
chardev: Add macOS to list of OSes that support -chardev serial
MAINTAINERS: Update Keith Busch's email address
elf_ops: Don't try to g_mapped_file_unref(NULL)
hw/mem/pc-dimm: Fix line over 80 characters warning
hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug()
MAINTAINERS: Mark the LatticeMico32 target as orphan
timer/exynos4210_mct: Remove redundant statement in exynos4210_mct_write()
display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32()
scsi/esp-pci: add g_assert() for fix clang analyzer warning in esp_pci_io_write()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Run block_copy iterations in parallel in aio tasks.
Changes:
- BlockCopyTask becomes aio task structure. Add zeroes field to pass
it to block_copy_do_copy
- add call state - it's a state of one call of block_copy(), shared
between parallel tasks. For now used only to keep information about
first error: is it read or not.
- convert block_copy_dirty_clusters to aio-task loop.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200429130847.28124-6-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of just relying on the comment "Called only on full-dirty
region" in block_copy_task_create() let's move initial dirty area
search directly to block_copy_task_create(). Let's also use effective
bdrv_dirty_bitmap_next_dirty_area instead of looping through all
non-dirty clusters.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200429130847.28124-5-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to use aio-task-pool API, so we'll need state pointer in
BlockCopyTask anyway. Add it now and use where possible.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200429130847.28124-4-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to use aio-task-pool API, so tasks will be handled in
parallel. We need therefore separate allocated task on each iteration.
Introduce this logic now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200429130847.28124-3-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are going to use aio-task-pool API and extend in-flight request
structure to be a successor of AioTask, so rename things appropriately.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200429130847.28124-2-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It's been a while since we got rid of the sector-based bdrv_read and
bdrv_write (commit 2e11d756); let's finish the job on a few remaining
comments.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428213807.776655-1-eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Our comment did not actually match the code. Rewrite the comment to
be less sensitive to any future changes to qcow2-bitmap.c that might
implement scenarios that we currently reject.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200428192648.749066-4-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We originally refused to allow resize of images with internal
snapshots because the v2 image format did not require the tracking of
snapshot size, making it impossible to safely revert to a snapshot
with a different size than the current view of the image. But the
snapshot size tracking was rectified in v3, and our recent fixes to
qemu-img amend (see 0a85af35) guarantee that we always have a valid
snapshot size. Thus, we no longer need to artificially limit image
resizes, but it does become one more thing that would prevent a
downgrade back to v2. And now that we support different-sized
snapshots, it's also easy to fix reverting to a snapshot to apply the
new size.
Upgrade iotest 61 to cover this (we previously had NO coverage of
refusal to resize while snapshots exist). Note that the amend process
can fail but still have effects: in particular, since we break things
into upgrade, resize, downgrade, a failure during resize does not roll
back changes made during upgrade, nor does failure in downgrade roll
back a resize. But this situation is pre-existing even without this
patch; and without journaling, the best we could do is minimize the
chance of partial failure by collecting all changes prior to doing any
writes - which adds a lot of complexity but could still fail with EIO.
On the other hand, we are careful that even if we have partial
modification but then fail, the image is left viable (that is, we are
careful to sequence things so that after each successful cluster
write, there may be transient leaked clusters but no corrupt
metadata). And complicating the code to make it more transaction-like
is not worth the effort: a user can always request multiple 'qemu-img
amend' changing one thing each, if they need finer-grained control
over detecting the first failure than what they get by letting qemu
decide how to sequence multiple changes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200428192648.749066-3-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There are several callers that need to create a new block backend from
an existing BDS; make the task slightly easier with a common helper
routine.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424190903.522087-2-eblake@redhat.com>
[mreitz: Set @ret only in error paths, see
https://lists.nongnu.org/archive/html/qemu-block/2020-04/msg01216.html]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200428192648.749066-2-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The NBD spec was updated (see nbd.git commit 9f30fedb) so that
max_block doesn't relate to NBD_CMD_TRIM. So, drop the restriction.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200401150112.9557-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: tweak commit message to call out NBD commit]
Signed-off-by: Eric Blake <eblake@redhat.com>
The NBD spec was updated (see nbd.git commit 9f30fedb) so that
max_block doesn't relate to NBD_CMD_BLOCK_STATUS. So, drop the
restriction.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200401150112.9557-2-vsementsov@virtuozzo.com>
[eblake: tweak commit message to call out NBD commit]
Signed-off-by: Eric Blake <eblake@redhat.com>
- ran regexp "qemu_mutex_lock\(.*\).*\n.*if" to find targets
- replaced result with QEMU_LOCK_GUARD if all unlocks at function end
- replaced result with WITH_QEMU_LOCK_GUARD if unlock not at end
Signed-off-by: Daniel Brodsky <dnbrdsky@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20200404042108.389635-3-dnbrdsky@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Compress two lines into a single line if immediate return statement is found.
It also remove variables progress, val, data, ret and sock
as they are no longer needed.
Remove space between function "mixer_load" and '(' to fix the
checkpatch.pl error:-
ERROR: space prohibited between function name and open parenthesis '('
Done using following coccinelle script:
@@
local idexpression ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Simran Singhal <singhalsimran0@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200401165314.GA3213@simran-Inspiron-5558>
[lv: in handle_aiocb_write_zeroes_unmap() move "int ret" inside the #ifdef]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The BDRV_REQ_ZERO_WRITE is currently implemented in a way that first the
image is possibly preallocated and then the zero flag is added to all
clusters. This means that a copy-on-write operation may be needed when
writing to these clusters, despite having used preallocation, negating
one of the major benefits of preallocation.
Instead, try to forward the BDRV_REQ_ZERO_WRITE to the protocol driver,
and if the protocol driver can ensure that the new area reads as zeros,
we can skip setting the zero flag in the qcow2 layer.
Unfortunately, the same approach doesn't work for metadata
preallocation, so we'll still set the zero flag there.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424142701.67053-1-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When extending the size of an image that has a backing file larger than
its old size, make sure that the backing file data doesn't become
visible in the guest, but the added area is properly zeroed out.
Consider the following scenario where the overlay is shorter than its
backing file:
base.qcow2: AAAAAAAA
overlay.qcow2: BBBB
When resizing (extending) overlay.qcow2, the new blocks should not stay
unallocated and make the additional As from base.qcow2 visible like
before this patch, but zeros should be read.
A similar case happens with the various variants of a commit job when an
intermediate file is short (- for unallocated):
base.qcow2: A-A-AAAA
mid.qcow2: BB-B
top.qcow2: C--C--C-
After commit top.qcow2 to mid.qcow2, the following happens:
mid.qcow2: CB-C00C0 (correct result)
mid.qcow2: CB-C--C- (before this fix)
Without the fix, blocks that previously read as zeros on top.qcow2
suddenly turn into A.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200424125448.63318-8-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For regular files, we always get BDRV_REQ_ZERO_WRITE behaviour from the
OS, so we can advertise the flag and just ignore it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-7-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The raw format driver can simply forward the flag and let its bs->file
child take care of actually providing the zeros.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200424125448.63318-6-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If BDRV_REQ_ZERO_WRITE is set and we're extending the image, calling
qcow2_cluster_zeroize() with flags=0 does the right thing: It doesn't
undo any previous preallocation, but just adds the zero flag to all
relevant L2 entries. If an external data file is in use, a write_zeroes
request to the data file is made instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200424125448.63318-5-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that node level interface bdrv_truncate() supports passing request
flags to the block driver, expose this on the BlockBackend level, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that block drivers can support flags for .bdrv_co_truncate, expose
the parameter in the node level interfaces bdrv_co_truncate() and
bdrv_truncate().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a new BdrvRequestFlags parameter to the .bdrv_co_truncate()
driver callbacks, and a supported_truncate_flags field in
BlockDriverState that allows drivers to advertise support for request
flags in the context of truncate.
For now, we always pass 0 and no drivers declare support for any flag.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The previous few commits have made this more obvious, and removed the
one exception. Time to clarify the documentation, and drop dead error
checking.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-13-armbru@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
check_cache_dropped() calls error_setg() in a loop. It fails to break
the loop in one instance. If a subsequent iteration error_setg()s
again, it trips error_setv()'s assertion.
Fix it to break the loop.
Fixes: 31be8a2a97
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200422130719.28225-3-armbru@redhat.com>
Fixes the following coccinelle warnings:
$ spatch --sp-file --verbose-parsing ... \
scripts/coccinelle/remove_local_err.cocci
...
SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5213
SUSPICIOUS: a \ character appears outside of a #define at ./target/ppc/translate_init.inc.c:5261
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:166
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:167
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:169
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:170
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:171
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:172
SUSPICIOUS: a \ character appears outside of a #define at ./target/microblaze/cpu.c:173
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5787
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5789
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5800
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5801
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5802
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5804
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5805
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:5806
SUSPICIOUS: a \ character appears outside of a #define at ./target/i386/cpu.c:6329
SUSPICIOUS: a \ character appears outside of a #define at ./hw/sd/sdhci.c:1133
SUSPICIOUS: a \ character appears outside of a #define at ./hw/scsi/scsi-disk.c:3081
SUSPICIOUS: a \ character appears outside of a #define at ./hw/net/virtio-net.c:1529
SUSPICIOUS: a \ character appears outside of a #define at ./hw/riscv/sifive_u.c:468
SUSPICIOUS: a \ character appears outside of a #define at ./dump/dump.c:1895
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2209
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2215
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2221
SUSPICIOUS: a \ character appears outside of a #define at ./block/vhdx.c:2222
SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:172
SUSPICIOUS: a \ character appears outside of a #define at ./block/replication.c:173
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200412223619.11284-2-f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There is an overflow, the source 'datain.data[2]' is 100 bytes,
but the 'ss' is 252 bytes.This may cause a security issue because
we can access a lot of unrelated memory data.
The len for sbp copy data should take the minimum of mx_sb_len and
sb_len_wr, not the maximum.
If we use iscsi device for VM backend storage, ASAN show stack:
READ of size 252 at 0xfffd149dcfc4 thread T0
#0 0xaaad433d0d34 in __asan_memcpy (aarch64-softmmu/qemu-system-aarch64+0x2cb0d34)
#1 0xaaad45f9d6d0 in iscsi_aio_ioctl_cb /qemu/block/iscsi.c:996:9
#2 0xfffd1af0e2dc (/usr/lib64/iscsi/libiscsi.so.8+0xe2dc)
#3 0xfffd1af0d174 (/usr/lib64/iscsi/libiscsi.so.8+0xd174)
#4 0xfffd1af19fac (/usr/lib64/iscsi/libiscsi.so.8+0x19fac)
#5 0xaaad45f9acc8 in iscsi_process_read /qemu/block/iscsi.c:403:5
#6 0xaaad4623733c in aio_dispatch_handler /qemu/util/aio-posix.c:467:9
#7 0xaaad4622f350 in aio_dispatch_handlers /qemu/util/aio-posix.c:510:20
#8 0xaaad4622f350 in aio_dispatch /qemu/util/aio-posix.c:520
#9 0xaaad46215944 in aio_ctx_dispatch /qemu/util/async.c:298:5
#10 0xfffd1bed12f4 in g_main_context_dispatch (/lib64/libglib-2.0.so.0+0x512f4)
#11 0xaaad46227de0 in glib_pollfds_poll /qemu/util/main-loop.c:219:9
#12 0xaaad46227de0 in os_host_main_loop_wait /qemu/util/main-loop.c:242
#13 0xaaad46227de0 in main_loop_wait /qemu/util/main-loop.c:518
#14 0xaaad43d9d60c in qemu_main_loop /qemu/softmmu/vl.c:1662:9
#15 0xaaad4607a5b0 in main /qemu/softmmu/main.c:49:5
#16 0xfffd1a460b9c in __libc_start_main (/lib64/libc.so.6+0x20b9c)
#17 0xaaad43320740 in _start (aarch64-softmmu/qemu-system-aarch64+0x2c00740)
0xfffd149dcfc4 is located 0 bytes to the right of 100-byte region [0xfffd149dcf60,0xfffd149dcfc4)
allocated by thread T0 here:
#0 0xaaad433d1e70 in __interceptor_malloc (aarch64-softmmu/qemu-system-aarch64+0x2cb1e70)
#1 0xfffd1af0e254 (/usr/lib64/iscsi/libiscsi.so.8+0xe254)
#2 0xfffd1af0d174 (/usr/lib64/iscsi/libiscsi.so.8+0xd174)
#3 0xfffd1af19fac (/usr/lib64/iscsi/libiscsi.so.8+0x19fac)
#4 0xaaad45f9acc8 in iscsi_process_read /qemu/block/iscsi.c:403:5
#5 0xaaad4623733c in aio_dispatch_handler /qemu/util/aio-posix.c:467:9
#6 0xaaad4622f350 in aio_dispatch_handlers /qemu/util/aio-posix.c:510:20
#7 0xaaad4622f350 in aio_dispatch /qemu/util/aio-posix.c:520
#8 0xaaad46215944 in aio_ctx_dispatch /qemu/util/async.c:298:5
#9 0xfffd1bed12f4 in g_main_context_dispatch (/lib64/libglib-2.0.so.0+0x512f4)
#10 0xaaad46227de0 in glib_pollfds_poll /qemu/util/main-loop.c:219:9
#11 0xaaad46227de0 in os_host_main_loop_wait /qemu/util/main-loop.c:242
#12 0xaaad46227de0 in main_loop_wait /qemu/util/main-loop.c:518
#13 0xaaad43d9d60c in qemu_main_loop /qemu/softmmu/vl.c:1662:9
#14 0xaaad4607a5b0 in main /qemu/softmmu/main.c:49:5
#15 0xfffd1a460b9c in __libc_start_main (/lib64/libc.so.6+0x20b9c)
#16 0xaaad43320740 in _start (aarch64-softmmu/qemu-system-aarch64+0x2c00740)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200418062602.10776-1-kuhn.chenqun@huawei.com
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Fix crashes and hangs related to iothreads, bdrv_drain and block jobs:
- Fix some AIO context locking in jobs
- Fix blk->in_flight during blk_wait_while_drained()
- vpc: Don't round up already aligned BAT sizes
-----BEGIN PGP SIGNATURE-----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=oODf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Fix crashes and hangs related to iothreads, bdrv_drain and block jobs:
- Fix some AIO context locking in jobs
- Fix blk->in_flight during blk_wait_while_drained()
- vpc: Don't round up already aligned BAT sizes
# gpg: Signature made Tue 07 Apr 2020 15:25:24 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
vpc: Don't round up already aligned BAT sizes
block: Fix blk->in_flight during blk_wait_while_drained()
block: Increase BB.in_flight for coroutine and sync interfaces
block-backend: Reorder flush/pdiscard function definitions
backup: don't acquire aio_context in backup_clean
replication: assert we own context before job_cancel_sync
job: take each job's lock individually in job_txn_apply
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As reported on Launchpad, Azure apparently doesn't accept images for
upload that are not both aligned to 1 MB blocks and have a BAT size that
matches the image size exactly.
As far as I can tell, there is no real reason why we create a BAT that
is one entry longer than necessary for aligned image sizes, so change
that.
(Even though the condition is only mentioned as "should" in the spec and
previous products accepted larger BATs - but we'll try to maintain
compatibility with as many of Microsoft's ever-changing interpretations
of the VHD spec as possible.)
Fixes: https://bugs.launchpad.net/bugs/1870098
Reported-by: Tobias Witek
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200402093603.2369-1-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Waiting in blk_wait_while_drained() while blk->in_flight is increased
for the current request is wrong because it will cause the drain
operation to deadlock.
This patch makes sure that blk_wait_while_drained() is called with
blk->in_flight increased exactly once for the current request, and that
it temporarily decreases the counter while it waits.
Fixes: cf3129323f
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200407121259.21350-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
External callers of blk_co_*() and of the synchronous blk_*() functions
don't currently increase the BlockBackend.in_flight counter, but calls
from blk_aio_*() do, so there is an inconsistency whether the counter
has been increased or not.
This patch moves the actual operations to static functions that can
later know they will always be called with in_flight increased exactly
once, even for external callers using the blk_co_*() coroutine
interfaces.
If the public blk_co_*() interface is unused, remove it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200407121259.21350-3-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move all variants of the flush/pdiscard functions to a single place and
put the blk_co_*() version first because it is called by all other
variants (and will become static in the next patch).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200407121259.21350-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All code-paths leading to backup_clean (via job_clean) have the job's
context already acquired. The job's context is guaranteed to be the same
as the one used by backup_top via backup_job_create.
Since the previous logic effectively acquired the lock twice, this
broke cleanup of backups for disks using IO threads, since the BDRV_POLL_WHILE
in bdrv_backup_top_drop -> bdrv_do_drained_begin would only release the lock
once, thus deadlocking with the IO thread.
This is a partial revert of 0abf258171.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200407115651.69472-4-s.reiter@proxmox.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
job_cancel_sync requires the job's lock to be held, all other callers
already do this (replication_stop, drive_backup_abort,
blockdev_backup_abort, job_cancel_sync_all, cancel_common).
In this case we're in a BlockDriver handler, so we already have a lock,
just assert that it is the same as the one used for the commit_job.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Message-Id: <20200407115651.69472-3-s.reiter@proxmox.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When issuing a compressed write request the number of bytes must be a
multiple of the cluster size or reach the end of the last cluster.
With the current code such requests are allowed and we hit an
assertion:
$ qemu-img create -f qcow2 img.qcow2 1M
$ qemu-io -c 'write -c 0 32k' img.qcow2
qemu-io: block/qcow2.c:4257: qcow2_co_pwritev_compressed_task:
Assertion `bytes == s->cluster_size || (bytes < s->cluster_size &&
(offset + bytes == bs->total_sectors << BDRV_SECTOR_BITS))' failed.
Aborted
This patch fixes a regression introduced in 0d483dce38
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200406143401.26854-1-berto@igalia.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
A discard request deallocates the selected clusters so they read back
as zeroes. This is done by clearing the cluster offset field and
setting QCOW_OFLAG_ZERO in the L2 entry.
This flag is however only supported when qcow_version >= 3. In older
images the cluster is simply deallocated, exposing any possible stale
data from the backing file.
Since discard is an advisory operation it's safer to simply forbid it
in this scenario.
Note that we are adding this check to qcow2_co_pdiscard() and not to
qcow2_cluster_discard() or discard_in_l2_slice() because the last
two are also used by qcow2_snapshot_create() to discard the clusters
used by the VM state. In this case there's no risk of exposing stale
data to the guest and we really want that the clusters are always
discarded.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200331114345.29993-1-berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
These fields were already removed in commit c3c10f72, but then commit
b58deb34 revived them probably due to bad merge conflict resolution.
They are still unused, so remove them again.
Fixes: b58deb344d
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200326170757.12344-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
mirror_wait_for_free_in_flight_slot() just picks a random operation to
wait for. However, a MirrorOp is already in s->ops_in_flight when
mirror_co_read() waits for free slots, so if not enough slots are
immediately available, an operation can end up waiting for itself, or
two or more operations can wait for each other to complete, which
results in a hang.
Fix this by adding a flag to MirrorOp that tells us if the request is
already in flight (and therefore occupies slots that it will later
free), and picking only such operations for waiting.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1794692
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200326153628.4869-3-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit 7e6c4ff792.
The fix was incomplete as it only protected against requests waiting for
themselves, but not against requests waiting for each other. We need a
different solution.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200326153628.4869-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Clang static code analyzer show warning:
block/iscsi.c:1920:9: warning: Value stored to 'flags' is never read
flags &= ~BDRV_O_RDWR;
^ ~~~~~~~~~~~~
In iscsi_allocmap_init() only checks BDRV_O_NOCACHE, which
is the same in both of flags and bs->open_flags.
We can use the flags instead bs->open_flags to prevent Clang warning.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200311032927.35092-1-kuhn.chenqun@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block_int.h claims that .bdrv_has_zero_init must return 0 if
.bdrv_has_zero_init_truncate does likewise; but this is violated if
only the former callback is provided if .bdrv_co_truncate also exists.
When adding the latter callback, it was mistakenly added to only one
of the three possible sheepdog instantiations.
Fixes: 1dcaf527
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200324174233.1622067-5-eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
As the feature name table can be quite large (over 9k if all 64 bits
of all three feature fields have names; a mere 8 features leaves only
8 bytes for a backing file name in a 512-byte cluster), it is unwise
to emit this optional header in images with small cluster sizes.
Update iotest 036 to skip running on small cluster sizes; meanwhile,
note that iotest 061 never passed on alternative cluster sizes
(however, I limited this patch to tests with output affected by adding
feature names, rather than auditing for other tests that are not
robust to alternative cluster sizes).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200324174233.1622067-4-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The feature table is supposed to advertise the name of all feature
bits that we support; however, we forgot to update the table for
autoclear bits. While at it, move the table to read-only memory in
code, and tweak the qcow2 spec to name the second autoclear bit.
Update iotests that are affected by the longer header length.
Fixes: 88ddffae
Fixes: 93c24936
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200324174233.1622067-3-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Various trivial typos noticed while working on this file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200324174233.1622067-2-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of checking the .bdrv_co_create_opts to see if we need the
fallback, just implement the .bdrv_co_create_opts in the drivers that
need it.
This way we don't break various places that need to know if the
underlying protocol/format really supports image creation, and this way
we still allow some drivers to not support image creation.
Fixes: fd17146cd9
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1816007
Note that technically this driver reverts the image creation fallback
for the vxhs driver since I don't have a means to test it, and IMHO it
is better to leave it not supported as it was prior to generic image
creation patches.
Also drop iscsi_create_opts which was left accidentally.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200326011218.29230-3-mlevitsk@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
[mreitz: Fixed alignment, and moved bdrv_co_create_opts_simple() and
bdrv_create_opts_simple from block.h into block_int.h]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will allow the reuse of a single generic .bdrv_co_create
implementation for several drivers.
No functional changes.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200326011218.29230-2-mlevitsk@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
local_err is used again in mirror_exit_common() after
bdrv_set_backing_hd(), so we must zero it. Otherwise try to set
non-NULL local_err will crash.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200324153630.11882-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
data_file being NULL doesn't seem to be a correct state, but it's
better than dead pointer and simpler to debug.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200316060631.30052-3-vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If we fail to get bitmap info, we must not leak the encryption info.
Fixes: b8968c875f
Fixes: Coverity CID 1421894
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200320183620.1112123-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Tested-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
store_bitmap_data() loop does bdrv_set_dirty_iter() on each iteration,
which means that we actually don't need iterator itself and we can use
simpler bitmap API.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200205112041.6003-11-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Firstly, _next_dirty_area is for scenarios when we may contiguously
search for next dirty area inside some limited region, so it is more
comfortable to specify "end" which should not be recalculated on each
iteration.
Secondly, let's add a possibility to limit resulting area size, not
limiting searching area. This will be used in NBD code in further
commit. (Note that now bdrv_dirty_bitmap_next_dirty_area is unused)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200205112041.6003-8-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
We have bdrv_dirty_bitmap_next_zero, let's add corresponding
bdrv_dirty_bitmap_next_dirty, which is more comfortable to use than
bitmap iterators in some cases.
For test modify test_hbitmap_next_zero_check_range to check both
next_zero and next_dirty and add some new checks.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200205112041.6003-7-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
We are going to introduce bdrv_dirty_bitmap_next_dirty so that same
variable may be used to store its return value and to be its parameter,
so it would int64_t.
Similarly, we are going to refactor hbitmap_next_dirty_area to use
hbitmap_next_dirty together with hbitmap_next_zero, therefore we want
hbitmap_next_zero parameter type to be int64_t too.
So, for convenience update all parameters of *_next_zero and
*_next_dirty_area to be int64_t.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200205112041.6003-6-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
* get/set_uint cleanups (Felipe)
* Lock guard support (Stefan)
* MemoryRegion ownership cleanup (Philippe)
* AVX512 optimization for buffer_is_zero (Robert)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJecOZiAAoJEL/70l94x66DgGkH/jpY4IgqlSAAWCgaxfe1n1vg
ahSzSLrC8wiJq2Jxbmxn+5BbH6BxQ9ibflsY5bvCY/sTb7UlOFCPkFhQ2iUgplkw
ciB5UfgCA6OHpKEhpHhXtzlybtNOlxXNWYJ1SrcVXbRES8f7XdhMKs15mnJJuOOE
k/tuZo/44yZRJl0Cv+nkvIFcCVgyu1q0Lln/1MMPngY2r9gt893cY9feTBSSWgnp
+7HZr5TXI7mcIytczFKzbdujlG4391DGejKX66IIxGcWg9vXS7TwAStzH1vSKVfJ
73SKZBoCU5gpHHHC+dqVyouMerV+UE+WQPNtF+LCsNgJBw/2NXc1ZgDrtz1OI2c=
=+LRX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Bugfixes all over the place
* get/set_uint cleanups (Felipe)
* Lock guard support (Stefan)
* MemoryRegion ownership cleanup (Philippe)
* AVX512 optimization for buffer_is_zero (Robert)
# gpg: Signature made Tue 17 Mar 2020 15:01:54 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (62 commits)
hw/arm: Let devices own the MemoryRegion they create
hw/arm: Remove unnecessary memory_region_set_readonly() on ROM alias
hw/ppc/ppc405: Use memory_region_init_rom() with read-only regions
hw/arm/stm32: Use memory_region_init_rom() with read-only regions
hw/char: Let devices own the MemoryRegion they create
hw/riscv: Let devices own the MemoryRegion they create
hw/dma: Let devices own the MemoryRegion they create
hw/display: Let devices own the MemoryRegion they create
hw/core: Let devices own the MemoryRegion they create
scripts/cocci: Patch to let devices own their MemoryRegions
scripts/cocci: Patch to remove unnecessary memory_region_set_readonly()
scripts/cocci: Patch to detect potential use of memory_region_init_rom
hw/sparc: Use memory_region_init_rom() with read-only regions
hw/sh4: Use memory_region_init_rom() with read-only regions
hw/riscv: Use memory_region_init_rom() with read-only regions
hw/ppc: Use memory_region_init_rom() with read-only regions
hw/pci-host: Use memory_region_init_rom() with read-only regions
hw/net: Use memory_region_init_rom() with read-only regions
hw/m68k: Use memory_region_init_rom() with read-only regions
hw/display: Use memory_region_init_rom() with read-only regions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Description copied from Linux kernel commit from Gustavo A. R. Silva
(see [3]):
--v-- description start --v--
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to
declare variable-length types such as these ones is a flexible
array member [1], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler
warning in case the flexible array does not occur last in the
structure, which will help us prevent some kind of undefined
behavior bugs from being unadvertenly introduced [2] to the
Linux codebase from now on.
--^-- description end --^--
Do the similar housekeeping in the QEMU codebase (which uses
C99 since commit 7be41675f7).
All these instances of code were found with the help of the
following command (then manual analysis, without modifying
structures only having a single flexible array member, such
QEDTable in block/qed.h):
git grep -F '[0];'
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f
[3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1
Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Description copied from Linux kernel commit from Gustavo A. R. Silva
(see [3]):
--v-- description start --v--
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to
declare variable-length types such as these ones is a flexible
array member [1], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler
warning in case the flexible array does not occur last in the
structure, which will help us prevent some kind of undefined
behavior bugs from being unadvertenly introduced [2] to the
Linux codebase from now on.
--^-- description end --^--
Do the similar housekeeping in the QEMU codebase (which uses
C99 since commit 7be41675f7).
All these instances of code were found with the help of the
following Coccinelle script:
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
};
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
} QEMU_PACKED;
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f
[3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1
Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prior to 1143ec5ebf it was OK to qemu_iovec_from_buf() from aligned-up
buffer to original qiov, as qemu_iovec_from_buf() will stop at qiov end
anyway.
But after 1143ec5ebf we assume that bdrv_co_do_copy_on_readv works on
part of original qiov, defined by qiov_offset and bytes. So we must not
touch qiov behind qiov_offset+bytes bound. Fix it.
Cc: qemu-stable@nongnu.org # v4.2
Fixes: 1143ec5ebf
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20200312081949.5350-1-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When using a non-UTF8 secret to create a volume using qemu-img, the
following error happens:
$ qemu-img create -f luks --object secret,id=vol_1_encrypt0,file=vol_resize_pool.vol_1.secret.qzVQrI -o key-secret=vol_1_encrypt0 /var/tmp/pool_target/vol_1 10240K
Formatting '/var/tmp/pool_target/vol_1', fmt=luks size=10485760 key-secret=vol_1_encrypt0
qemu-img: /var/tmp/pool_target/vol_1: Data from secret vol_1_encrypt0 is not valid UTF-8
However, the created file '/var/tmp/pool_target/vol_1' is left behind in the
file system after the failure. This behavior can be observed when creating
the volume using Libvirt, via 'virsh vol-create', and then getting "volume
target path already exist" errors when trying to re-create the volume.
The volume file is created inside block_crypto_co_create_opts_luks(), in
block/crypto.c. If the bdrv_create_file() call is successful but any
succeeding step fails*, the existing 'fail' label does not take into
account the created file, leaving it behind.
This patch changes block_crypto_co_create_opts_luks() to delete
'filename' in case of failure. A failure in this point means that
the volume is now truncated/corrupted, so even if 'filename' was an
existing volume before calling qemu-img, it is now unusable. Deleting
the file it is not much worse than leaving it in the filesystem in
this scenario, and we don't have to deal with checking the file
pre-existence in the code.
* in our case, block_crypto_co_create_generic calls qcrypto_block_create,
which calls qcrypto_block_luks_create, and this function fails when
calling qcrypto_secret_lookup_as_utf8.
Reported-by: Srikanth Aithal <bssrikanth@in.ibm.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200130213907.2830642-4-danielhb413@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Adding to Block Drivers the capability of being able to clean up
its created files can be useful in certain situations. For the
LUKS driver, for instance, a failure in one of its authentication
steps can leave files in the host that weren't there before.
This patch adds the 'bdrv_co_delete_file' interface to block
drivers and add it to the 'file' driver in file-posix.c. The
implementation is given by 'raw_co_delete_file'.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200130213907.2830642-2-danielhb413@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Hide structure definitions and add explicit API instead, to keep an
eye on the scope of the shared fields.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311103004.7649-10-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, block_copy operation lock the whole requested region. But
there is no reason to lock clusters, which are already copied, it will
disturb other parallel block_copy requests for no reason.
Let's instead do the following:
Lock only sub-region, which we are going to operate on. Then, after
copying all dirty sub-regions, we should wait for intersecting
requests block-copy, if they failed, we should retry these new dirty
clusters.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200311103004.7649-9-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
offset/bytes pair is more usual naming in block layer, let's use it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311103004.7649-8-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We have a lot of "chunk_end - start" invocations, let's switch to
bytes/cur_bytes scheme instead.
While being here, improve check on block_copy_do_copy parameters to not
overflow when calculating nbytes and use int64_t for bytes in
block_copy for consistency.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311103004.7649-7-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Split find_conflicting_inflight_req to be used separately.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311103004.7649-6-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Use bdrv_block_status_above to chose effective chunk size and to handle
zeroes effectively.
This substitutes checking for just being allocated or not, and drops
old code path for it. Assistance by backup job is dropped too, as
caching block-status information is more difficult than just caching
is-allocated information in our dirty bitmap, and backup job is not
good place for this caching anyway.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311103004.7649-5-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In block_copy_do_copy we fallback to read+write if copy_range failed.
In this case copy_size is larger than defined for buffered IO, and
there is corresponding commit. Still, backup copies data cluster by
cluster, and most of requests are limited to one cluster anyway, so the
only source of this one bad-limited request is copy-before-write
operation.
Further patch will move backup to use block_copy directly, than for
cases where copy_range is not supported, first request will be
oversized in each backup. It's not good, let's change it now.
Fix is simple: just limit first copy_range request like buffer-based
request. If it succeed, set larger copy_range limit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311103004.7649-4-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Assume we have two regions, A and B, and region B is in-flight now,
region A is not yet touched, but it is unallocated and should be
skipped.
Correspondingly, as progress we have
total = A + B
current = 0
If we reset unallocated region A and call progress_reset_callback,
it will calculate 0 bytes dirty in the bitmap and call
job_progress_set_remaining, which will set
total = current + 0 = 0 + 0 = 0
So, B bytes are actually removed from total accounting. When job
finishes we'll have
total = 0
current = B
, which doesn't sound good.
This is because we didn't considered in-flight bytes, actually when
calculating remaining, we should have set (in_flight + dirty_bytes)
as remaining, not only dirty_bytes.
To fix it, let's refactor progress calculation, moving it to block-copy
itself instead of fixing callback. And, of course, track in_flight
bytes count.
We still have to keep one callback, to maintain backup job bytes_read
calculation, but it will go on soon, when we turn the whole backup
process into one block_copy call.
Cc: qemu-stable@nongnu.org
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200311103004.7649-3-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
On success path we return what inflate() returns instead of 0. And it
most probably works for Z_STREAM_END as it is positive, but is
definitely broken for Z_BUF_ERROR.
While being here, switch to errno return code, to be closer to
qcow2_compress API (and usual expectations).
Revert condition in if to be more positive. Drop dead initialization of
ret.
Cc: qemu-stable@nongnu.org # v4.0
Fixes: 341926ab83
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200302150930.16218-1-vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
'crypto_opts' forgot to free in qcow2_close(), this patch fix the bellow leak stack:
Direct leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x7f0edd81f970 in __interceptor_calloc (/lib64/libasan.so.5+0xef970)
#1 0x7f0edc6d149d in g_malloc0 (/lib64/libglib-2.0.so.0+0x5249d)
#2 0x55d7eaede63d in qobject_input_start_struct /mnt/sdb/qemu-new/qemu_test/qemu/qapi/qobject-input-visitor.c:295
#3 0x55d7eaed78b8 in visit_start_struct /mnt/sdb/qemu-new/qemu_test/qemu/qapi/qapi-visit-core.c:49
#4 0x55d7eaf5140b in visit_type_QCryptoBlockOpenOptions qapi/qapi-visit-crypto.c:290
#5 0x55d7eae43af3 in block_crypto_open_opts_init /mnt/sdb/qemu-new/qemu_test/qemu/block/crypto.c:163
#6 0x55d7eacd2924 in qcow2_update_options_prepare /mnt/sdb/qemu-new/qemu_test/qemu/block/qcow2.c:1148
#7 0x55d7eacd33f7 in qcow2_update_options /mnt/sdb/qemu-new/qemu_test/qemu/block/qcow2.c:1232
#8 0x55d7eacd9680 in qcow2_do_open /mnt/sdb/qemu-new/qemu_test/qemu/block/qcow2.c:1512
#9 0x55d7eacdc55e in qcow2_open_entry /mnt/sdb/qemu-new/qemu_test/qemu/block/qcow2.c:1792
#10 0x55d7eacdc8fe in qcow2_open /mnt/sdb/qemu-new/qemu_test/qemu/block/qcow2.c:1819
#11 0x55d7eac3742d in bdrv_open_driver /mnt/sdb/qemu-new/qemu_test/qemu/block.c:1317
#12 0x55d7eac3e990 in bdrv_open_common /mnt/sdb/qemu-new/qemu_test/qemu/block.c:1575
#13 0x55d7eac4442c in bdrv_open_inherit /mnt/sdb/qemu-new/qemu_test/qemu/block.c:3126
#14 0x55d7eac45c3f in bdrv_open /mnt/sdb/qemu-new/qemu_test/qemu/block.c:3219
#15 0x55d7ead8e8a4 in blk_new_open /mnt/sdb/qemu-new/qemu_test/qemu/block/block-backend.c:397
#16 0x55d7eacde74c in qcow2_co_create /mnt/sdb/qemu-new/qemu_test/qemu/block/qcow2.c:3534
#17 0x55d7eacdfa6d in qcow2_co_create_opts /mnt/sdb/qemu-new/qemu_test/qemu/block/qcow2.c:3668
#18 0x55d7eac1c678 in bdrv_create_co_entry /mnt/sdb/qemu-new/qemu_test/qemu/block.c:485
#19 0x55d7eb0024d2 in coroutine_trampoline /mnt/sdb/qemu-new/qemu_test/qemu/util/coroutine-ucontext.c:115
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200227012950.12256-2-pannengyuan@huawei.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
RFC 7230 section 3.2 indicates that HTTP header field names are case
insensitive.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20200224101310.101169-3-david.edmondson@oracle.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
RFC 7230 section 3.2 indicates that whitespace is permitted between
the field name and field value and after the field value.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20200224101310.101169-2-david.edmondson@oracle.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add qemu-img measure support in the "luks" block driver.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200221112522.1497712-3-stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The qcow2 .bdrv_measure() code calculates the crypto payload offset.
This logic really belongs in crypto/block.c where it can be reused by
other image formats.
The "luks" block driver will need this same logic in order to implement
.bdrv_measure(), so extract the qcrypto_block_calculate_payload_offset()
function now.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200221112522.1497712-2-stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-12-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-11-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-10-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-9-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
hmp_snapshot_blkdev is from GPLv2 version of the hmp-cmds.c thus
have to change the licence to GPLv2
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-8-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-7-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Moved code was added after 2012-01-13, thus under GPLv2+
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-6-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed commit message
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-5-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
These days device-hotplug.c only contains the hmp_drive_add
In the next patch, rest of hmp_drive* functions will be moved
there.
Also add block-hmp-cmds.h to contain prototypes of these
functions
License for block-hmp-cmds.h since it contains the code
moved from sysemu.h which lacks license and thus according
to LICENSE is under GPLv2+
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200308092440.23564-4-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Clang static code analyzer show warning:
block/file-posix.c:891:9: warning: Value stored to 'op' is never read
op = RAW_PL_ABORT;
^ ~~~~~~~~~~~~
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200302130715.29440-5-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Clang static code analyzer show warning:
block/stream.c:186:9: warning: Value stored to 'ret' is never read
ret = 0;
^ ~
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200302130715.29440-3-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Starting from ceph Nautilus, RBD has support for namespaces, allowing
for finer grain ACLs on images inside a pool, and tenant isolation.
In the rbd cli tool documentation, the new image-spec and snap-spec are :
- [pool-name/[namespace-name/]]image-name
- [pool-name/[namespace-name/]]image-name@snap-name
When using an non namespace's enabled qemu, it complains about not
finding the image called namespace-name/image-name, thus we only need to
parse the image once again to find if there is a '/' in its name, and if
there is, use what is before it as the name of the namespace to later
pass it to rados_ioctx_set_namespace.
rados_ioctx_set_namespace if called with en empty string or a null
pointer as the namespace parameters pretty much does nothing, as it then
defaults to the default namespace.
The namespace is extracted inside qemu_rbd_parse_filename, stored in the
qdict, and used in qemu_rbd_connect to make it work with both qemu-img,
and qemu itself.
Signed-off-by: Florian Florensa <fflorensa@online.net>
Message-Id: <20200110111513.321728-2-fflorensa@online.net>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a --blockdev option to the storage daemon that works the same
as the -blockdev option of the system emulator.
In order to be able to link with blockdev.o, we also need to change
stream.o from common-obj to block-obj, which is where all other block
jobs already are.
In contrast to the system emulator, qemu-storage-daemon options will be
processed in the order they are given. The user needs to take care to
refer to other objects only after defining them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-7-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These commands make only sense for system emulators and their
implementations call functions that don't exist in tools (e.g. to
resolve qdev IDs). Move them out so that blockdev.c can be linked to
qemu-storage-daemon.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-4-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bitmap code requires writing the 'file' child when the qcow2 driver
is reopened in read-write mode.
If the 'file' child is being reopened due to a permissions change, the
modification is commited yet when qcow2_reopen_commit is called. This
means that any attempt to write the 'file' child will end with EBADFD
as the original fd was already closed.
Moving bitmap reopening to the new callback which is called after
permission modifications are commited fixes this as the file descriptor
will be replaced with the correct one.
The above problem manifests itself when reopening 'qcow2' format layer
which uses a 'file-posix' file child which was opened with the
'auto-read-only' property set.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <db118dbafe1955afbc0a18d3dd220931074ce349.1582893284.git.pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
handle_alloc() reuses preallocated zero clusters. If anything goes
wrong during the data write, we do not change their L2 entry, so we
must not let qcow2_alloc_cluster_abort() free them.
Fixes: 8b24cd1415
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200225143130.111267-2-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After failover the Secondary side of replication shouldn't change state, because
it now functions as our primary disk.
In replication_start, replication_do_checkpoint, replication_stop, ignore
the request if current state is BLOCK_REPLICATION_DONE (sucessful failover) or
BLOCK_REPLICATION_FAILOVER (failover in progres i.e. currently merging active
and hidden images into the base image).
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Acked-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
In currently implementation there will be a memory leak when
nbd_client_connect() returns error status. Here is an easy way to
reproduce:
1. run qemu-iotests as follow and check the result with asan:
./check -raw 143
Following is the asan output backtrack:
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f629688a560 in calloc (/usr/lib64/libasan.so.3+0xc7560)
#1 0x7f6295e7e015 in g_malloc0 (/usr/lib64/libglib-2.0.so.0+0x50015)
#2 0x56281dab4642 in qobject_input_start_struct /mnt/sdb/qemu-4.2.0-rc0/qapi/qobject-input-visitor.c:295
#3 0x56281dab1a04 in visit_start_struct /mnt/sdb/qemu-4.2.0-rc0/qapi/qapi-visit-core.c:49
#4 0x56281dad1827 in visit_type_SocketAddress qapi/qapi-visit-sockets.c:386
#5 0x56281da8062f in nbd_config /mnt/sdb/qemu-4.2.0-rc0/block/nbd.c:1716
#6 0x56281da8062f in nbd_process_options /mnt/sdb/qemu-4.2.0-rc0/block/nbd.c:1829
#7 0x56281da8062f in nbd_open /mnt/sdb/qemu-4.2.0-rc0/block/nbd.c:1873
Direct leak of 15 byte(s) in 1 object(s) allocated from:
#0 0x7f629688a3a0 in malloc (/usr/lib64/libasan.so.3+0xc73a0)
#1 0x7f6295e7dfbd in g_malloc (/usr/lib64/libglib-2.0.so.0+0x4ffbd)
#2 0x7f6295e96ace in g_strdup (/usr/lib64/libglib-2.0.so.0+0x68ace)
#3 0x56281da804ac in nbd_process_options /mnt/sdb/qemu-4.2.0-rc0/block/nbd.c:1834
#4 0x56281da804ac in nbd_open /mnt/sdb/qemu-4.2.0-rc0/block/nbd.c:1873
Indirect leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x7f629688a3a0 in malloc (/usr/lib64/libasan.so.3+0xc73a0)
#1 0x7f6295e7dfbd in g_malloc (/usr/lib64/libglib-2.0.so.0+0x4ffbd)
#2 0x7f6295e96ace in g_strdup (/usr/lib64/libglib-2.0.so.0+0x68ace)
#3 0x56281dab41a3 in qobject_input_type_str_keyval /mnt/sdb/qemu-4.2.0-rc0/qapi/qobject-input-visitor.c:536
#4 0x56281dab2ee9 in visit_type_str /mnt/sdb/qemu-4.2.0-rc0/qapi/qapi-visit-core.c:297
#5 0x56281dad0fa1 in visit_type_UnixSocketAddress_members qapi/qapi-visit-sockets.c:141
#6 0x56281dad17b6 in visit_type_SocketAddress_members qapi/qapi-visit-sockets.c:366
#7 0x56281dad186a in visit_type_SocketAddress qapi/qapi-visit-sockets.c:393
#8 0x56281da8062f in nbd_config /mnt/sdb/qemu-4.2.0-rc0/block/nbd.c:1716
#9 0x56281da8062f in nbd_process_options /mnt/sdb/qemu-4.2.0-rc0/block/nbd.c:1829
#10 0x56281da8062f in nbd_open /mnt/sdb/qemu-4.2.0-rc0/block/nbd.c:1873
Fixes: 8f071c9db5
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Cc: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1575517528-44312-3-git-send-email-pannengyuan@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The BDRVNBDState cleanup code is common in two places, add
nbd_clear_bdrvstate() function to do these cleanups.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1575517528-44312-2-git-send-email-pannengyuan@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix compilation error and commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
The NBD URI specification [1] states that only one leading slash at
the beginning of the URI path component is stripped, not all such
slashes. This becomes important to a patch I just proposed to nbdkit
[2], which would allow the exportname to select a file embedded within
an ext2 image: ext2fs demands an absolute pathname beginning with '/',
and because qemu was inadvertantly stripping it, my nbdkit patch had
to work around the behavior.
[1] https://github.com/NetworkBlockDevice/nbd/blob/master/doc/uri.md
[2] https://www.redhat.com/archives/libguestfs/2020-February/msg00109.html
Note that the qemu bug only affects handling of URIs such as
nbd://host:port//abs/path (where '/abs/path' should be the export
name); it is still possible to use --image-opts and pass the desired
export name with a leading slash directly through JSON even without
this patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200212023101.1162686-1-eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When printing the snapshot list (e.g. with qemu-img snapshot -l), the VM
size field is only seven characters wide. As of de38b5005e, this is
not necessarily sufficient: We generally print three digits, and this
may require a decimal point. Also, the unit field grew from something
as plain as "M" to " MiB". This means that number and unit may take up
eight characters in total; but we also want spaces in front.
Considering previously the maximum width was four characters and the
field width was chosen to be three characters wider, let us adjust the
field width to be eleven now.
Fixes: de38b5005e
Buglink: https://bugs.launchpad.net/qemu/+bug/1859989
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200117105859.241818-2-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The generic fallback implementation effectively does the same.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200122164532.178040-5-mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The generic fallback implementation effectively does the same.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200122164532.178040-4-mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When nbd_close() is called from a coroutine, the connection_co never
gets to run, and thus nbd_teardown_connection() hangs.
This is because aio_co_enter() only puts the connection_co into the main
coroutine's wake-up queue, so this main coroutine needs to yield and
wait for connection_co to terminate.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200122164532.178040-2-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
backup-top "supports" write-unchanged, by skipping CBW operation in
backup_top_co_pwritev. But it forgets to do the same in
backup_top_co_pwrite_zeroes, as well as declare support for
BDRV_REQ_WRITE_UNCHANGED.
Fix this, and, while being here, declare also support for flags
supported by source child.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200207161231.32707-1-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When initializing the LUKS header the size with default encryption
parameters will currently be 2068480 bytes. This is rounded up to
a multiple of the cluster size, 2081792, with 64k sectors. If the
end of the header is not the same as the end of the cluster we fill
the extra space with zeros. This was forgetting that not even the
space allocated for the header will be fully initialized, as we
only write key material for the first key slot. The space left
for the other 7 slots is never written to.
An optimization to the ref count checking code:
commit a5fff8d4b4 (refs/bisect/bad)
Author: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Date: Wed Feb 27 16:14:30 2019 +0300
qcow2-refcount: avoid eating RAM
made the assumption that every cluster which was allocated would
have at least some data written to it. This was violated by way
the LUKS header is only partially written, with much space simply
reserved for future use.
Depending on the cluster size this problem was masked by the
logic which wrote zeros between the end of the LUKS header and
the end of the cluster.
$ qemu-img create --object secret,id=cluster_encrypt0,data=123456 \
-f qcow2 -o cluster_size=2k,encrypt.iter-time=1,\
encrypt.format=luks,encrypt.key-secret=cluster_encrypt0 \
cluster_size_check.qcow2 100M
Formatting 'cluster_size_check.qcow2', fmt=qcow2 size=104857600
encrypt.format=luks encrypt.key-secret=cluster_encrypt0
encrypt.iter-time=1 cluster_size=2048 lazy_refcounts=off refcount_bits=16
$ qemu-img check --object secret,id=cluster_encrypt0,data=redhat \
'json:{"driver": "qcow2", "encrypt.format": "luks", \
"encrypt.key-secret": "cluster_encrypt0", \
"file.driver": "file", "file.filename": "cluster_size_check.qcow2"}'
ERROR: counting reference for region exceeding the end of the file by one cluster or more: offset 0x2000 size 0x1f9000
Leaked cluster 4 refcount=1 reference=0
...snip...
Leaked cluster 130 refcount=1 reference=0
1 errors were found on the image.
Data may be corrupted, or further writes to the image may corrupt it.
127 leaked clusters were found on the image.
This means waste of disk space, but no harm to data.
Image end offset: 268288
The problem only exists when the disk image is entirely empty. Writing
data to the disk image payload will solve the problem by causing the
end of the file to be extended further.
The change fixes it by ensuring that the entire allocated LUKS header
region is fully initialized with zeros. The qemu-img check will still
fail for any pre-existing disk images created prior to this change,
unless at least 1 byte of the payload is written to.
Fully writing zeros to the entire LUKS header is a good idea regardless
as it ensures that space has been allocated on the host filesystem (or
whatever block storage backend is used).
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200207135520.2669430-1-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When a management application manages node names there's no reason to
recurse into backing images in the output of query-named-block-nodes.
Add a parameter to the command which will return just the top level
structs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <4470f8c779abc404dcf65e375db195cd91a80651.1579509782.git.pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[mreitz: Fixed coding style]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Quorum is not a filter, for example because it cannot guarantee which of
its children will serve the next request. Thus, any of its children may
differ from the data visible to quorum's parents.
We have other filters with multiple children, but they differ in this
aspect:
- blkverify quits the whole qemu process if its children differ. As
such, we can always skip it when we want to skip it (as a filter node)
by going to any of its children. Both have the same data.
- replication generally serves requests from bs->file, so this is its
only actually filtered child.
- Block job filters currently only have one child, but they will
probably get more children in the future. Still, they will always
have only one actually filtered child.
Having "filters" as a dedicated node category only makes sense if you
can skip them by going to a one fixed child that always shows the same
data as the filter node. Quorum cannot fulfill this, so it is not a
filter.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-13-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no guarantee that we can still replace the node we want to
replace at the end of the mirror job. Double-check by calling
bdrv_recurse_can_replace().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-12-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It no longer has any users.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-11-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-8-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Quorum cannot share WRITE or RESIZE on its children. Presumably, it
only does so because as a filter, it seemed intuitively correct to point
its .bdrv_child_perm to bdrv_filter_default_perm().
However, it is not really a filter, and bdrv_filter_default_perm() does
not work for it, so we have to provide a custom .bdrv_child_perm
implementation.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200218103454.296704-6-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fixes: 6663a0a337
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200218094402.26625-5-philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block_job_error_action() needs to know if reading from the top node or
writing to the base node failed so that it can set the right 'operation'
in the BLOCK_JOB_ERROR QMP event.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-6-kwolf@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
commit_populate() is a very short function and only called in a single
place. Its return value doesn't tell us whether an error happened while
reading or writing, which would be necessary for sending the right data
in the BLOCK_JOB_ERROR QMP event.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-5-kwolf@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block_job_error_action() error call in the commit job gives the
on_err and is_read arguments in the wrong order. Fix this.
(Of course, hard-coded is_read = false is wrong, too, but that's a
separate problem for a separate patch.)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-4-kwolf@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bytes_written variable is only ever written to, it serves no
purpose. This has actually been the case since the commit job was first
introduced in commit 747ff60263.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-3-kwolf@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix warning reported by Clang static code analyzer:
CC block/qcow2-bitmap.o
block/qcow2-bitmap.c:650:5: warning: Value stored to 'ret' is never read
ret = -EINVAL;
^ ~~~~~~~
Fixes: 88ddffae8
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200215161557.4077-2-philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For external data file, cluster allocations return an offset in the data
file and are not refcounted. In this case, there is nothing to do for
qcow2_alloc_cluster_abort(). Freeing the same offset in the qcow2 file
is wrong and causes crashes in the better case or image corruption in
the worse case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200211094900.17315-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the case that update_refcount() frees a refcount block, it evicts it
from the metadata cache. Before doing so, however, it returns the
currently used refcount block to the cache because it might be the same.
Returning the refcount block early means that we need to reset
old_table_index so that we reload the refcount block in the next
iteration if it is actually still in use.
Fixes: f71c08ea8e
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200211094900.17315-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before this commit, BDRVVVFATState.qcow is unrefed in write_target_close
on closing backing bdrv of vvfat. However, qcow bdrv is opend as a child
of vvfat in enable_write_target() so it will be also unrefed on closing
vvfat itself. This causes use-after-free of qcow on freeing vvfat which
has backing bdrv and qcow bdrv as children in this order because
bdrv_close(vvfat) tries to free qcow bdrv after freeing backing bdrv
as QLIST_FOREACH_SAFE() loop keeps next pointer, but BdrvChild of qcow
is already freed in bdrv_close(backing bdrv).
Signed-off-by: Hikaru Nishida <hikarupsp@gmail.com>
Message-Id: <20200209175156.85748-1-hikarupsp@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I/O requests to encrypted media should be aligned to the sector size
used by the underlying encryption method, not to BDRV_SECTOR_SIZE.
Fortunately this doesn't break anything at the moment because
both existing QCRYPTO_BLOCK_*_SECTOR_SIZE have the same value as
BDRV_SECTOR_SIZE.
The checks in qcow2_co_preadv_encrypted() are also unnecessary because
they are repeated immediately afterwards in qcow2_co_encdec().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200213171646.15876-1-berto@igalia.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
mirror_wait_for_free_in_flight_slot() just picks a random operation to
wait for. However, when mirror_co_read() waits for free slots, its
MirrorOp is already in s->ops_in_flight, so if not enough slots are
immediately available, an operation can end up waiting for itself to
complete, which results in a hang.
Fix this by passing the current MirrorOp and skipping this operation
when picking an operation to wait for.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1794692
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a coroutine is launched, but the coroutine pointer isn't stored
anywhere, debugging any problems inside the coroutine is quite hard.
Let's store the coroutine pointer of a mirror operation in MirrorOp to
have it available in the debugger.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit 7a3f542fbd "block/io: refactor padding" occasionally dropped
aligning for zero-length request: bdrv_init_padding() blindly return
false if bytes == 0, like there is nothing to align.
This leads the following command to crash:
./qemu-io --image-opts -c 'write 1 0' \
driver=blkdebug,align=512,image.driver=null-co,image.size=512
>> qemu-io: block/io.c:1955: bdrv_aligned_pwritev: Assertion
`(offset & (align - 1)) == 0' failed.
>> Aborted (core dumped)
Prior to 7a3f542fbd we does aligning of such zero requests. Instead of
recovering this behavior let's just do nothing on such requests as it
is useless.
Note that driver may have special meaning of zero-length reqeusts, like
qcow2_co_pwritev_compressed_part, so we can't skip any zero-length
operation. But for unaligned ones, we can't pass it to driver anyway.
This commit also fixes crash in iotest 80 running with -nocache:
./check -nocache -qcow2 80
which crashes on same assertion due to trying to read empty extra data
in qcow2_do_read_snapshots().
Cc: qemu-stable@nongnu.org # v4.2
Fixes: 7a3f542fbd
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20200206164245.17781-1-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We can't access top after call bdrv_backup_top_drop, as it is already
freed at this time.
Also, no needs to unref target child by hand, it will be unrefed on
bdrv_close() automatically.
So, just do bdrv_backup_top_drop if append succeed and one bdrv_unref
otherwise.
Note, that in !appended case bdrv_unref(top) moved into drained section
on source. It doesn't really matter, but just for code simplicity.
Fixes: 7df7868b96
Cc: qemu-stable@nongnu.org # v4.2.0
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20200121142802.21467-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
qemu-img's convert_co_copy_range() operates at the sector level and
block_copy() operates at the cluster level so this condition is always
true, but it is not necessary to restrict this here, so let's leave it
to the driver implementation return an error if there is any.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: a4264aaee656910c84161a2965f7a501437379ca.1579374329.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When updating an L1 entry the qcow2 driver writes a (512-byte) sector
worth of data to avoid a read-modify-write cycle. Instead of always
writing 512 bytes we should follow the alignment requirements of the
storage backend.
(the only exception is when the alignment is larger than the cluster
size because then we could be overwriting data after the L1 table)
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 71f34d4ae4b367b32fb36134acbf4f4f7ee681f4.1579374329.git.berto@igalia.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
qcow2_alloc_cluster_offset() and qcow2_get_cluster_offset() always
return offsets that are cluster-aligned so don't just check that they
are sector-aligned.
The check in qcow2_co_preadv_task() is also replaced by an assertion
for the same reason.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 558ba339965f858bede4c73ce3f50f0c0493597d.1579374329.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The L1 table is read from disk using the byte-based bdrv_pread() and
is never accessed beyond its last element, so there's no need to
allocate more memory than that.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: b2e27214ec7b03a585931bcf383ee1ac3a641a10.1579374329.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is a bit more efficient than having to allocate and free memory
for each item.
The default size (60) is enough for all the existing incompatible
features or the "Unknown incompatible feature" message.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200115135626.19442-1-berto@igalia.com
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The standard cluster descriptor in L2 table entries has a field to
store the host cluster offset. When we need to get that offset from an
entry we use L2E_OFFSET_MASK to ensure that we only use the bits that
belong to that field.
But while that mask is used every time we read from an L2 entry, it
is never used when we write to it. Due to the QCOW_MAX_CLUSTER_OFFSET
limit set in the cluster allocation code QEMU can never produce
offsets that don't fit in that field so any such offset would indicate
a bug in QEMU.
Compressed cluster descriptors contain two fields (host cluster offset
and size of the compressed data) and the situation with them is
similar. In this case the masks are not constant but are stored in the
csize_mask and cluster_offset_mask fields of BDRVQcow2State.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20200113161146.20099-1-berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
