Move the various memalign-related functions out of osdep.h and into
their own header, which we include only where they are used.
While we're doing this, add some brief documentation comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
block_crypto_amend_options_generic_luks uses the block layer
permission API, therefore it should be called with the BQL held.
However, the same function is being called by two BlockDriver
callbacks: bdrv_amend_options (under BQL) and bdrv_co_amend (I/O).
The latter is I/O because it is invoked by block/amend.c's
blockdev_amend_run(), a .run callback of the amend JobDriver.
Therefore we want to change this function to still perform
the permission check, but making sure it is done under BQL regardless
of the caller context.
Remove the permission check in block_crypto_amend_options_generic_luks()
and:
- in block_crypto_amend_options_luks() (BQL case, called by
.bdrv_amend_options()), reuse helper functions
block_crypto_amend_{prepare/cleanup} that take care of checking
permissions.
- for block_crypto_co_amend_luks() (I/O case, called by
.bdrv_co_amend()), don't check for permissions but delegate
.bdrv_amend_pre_run() and .bdrv_amend_clean() to do it,
performing these checks before and after the job runs in its aiocontext.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220209105452.1694545-3-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the permission API calls into driver-specific callbacks
that always run under BQL. In this case, bdrv_crypto_luks
needs to perform permission checks before and after
qcrypto_block_amend_options(). The problem is that the caller,
block_crypto_amend_options_generic_luks(), can also run in I/O
from .bdrv_co_amend(). This does not comply with Global State-I/O API split,
as permissions API must always run under BQL.
Firstly, introduce .bdrv_amend_pre_run() and .bdrv_amend_clean()
callbacks. These two callbacks are guaranteed to be invoked under
BQL, respectively before and after .bdrv_co_amend().
They take care of performing the permission checks
in the same way as they are currently done before and after
qcrypto_block_amend_options().
These callbacks are in preparation for next patch, where we
delete the original permission check. Right now they just add redundant
control.
Then, call .bdrv_amend_pre_run() before job_start in
qmp_x_blockdev_amend(), so that it will be run before the job coroutine
is created and stay in the main loop.
As a cleanup, use JobDriver's .clean() callback to call
.bdrv_amend_clean(), and run amend-specific cleanup callbacks under BQL.
After this patch, permission failures occur early in the blockdev-amend
job to update a LUKS volume's keys. iotest 296 must now expect them in
x-blockdev-amend's QMP reply instead of waiting for the actual job to
fail later.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220209105452.1694545-2-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220304153729.711387-6-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver write handlers parameters which are already 64bit to
signed type.
While being here, convert also flags parameter to be BdrvRequestFlags.
Now let's consider all callers. Simple
git grep '\->bdrv_\(aio\|co\)_pwritev\(_part\)\?'
shows that's there three callers of driver function:
bdrv_driver_pwritev() and bdrv_driver_pwritev_compressed() in
block/io.c, both pass int64_t, checked by bdrv_check_qiov_request() to
be non-negative.
qcow2_save_vmstate() does bdrv_check_qiov_request().
Still, the functions may be called directly, not only by drv->...
Let's check:
git grep '\.bdrv_\(aio\|co\)_pwritev\(_part\)\?\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done
shows several callers:
qcow2:
qcow2_co_truncate() write at most up to @offset, which is checked in
generic qcow2_co_truncate() by bdrv_check_request().
qcow2_co_pwritev_compressed_task() pass the request (or part of the
request) that already went through normal write path, so it should
be OK
qcow:
qcow_co_pwritev_compressed() pass int64_t, it's updated by this patch
quorum:
quorum_co_pwrite_zeroes() pass int64_t and int - OK
throttle:
throttle_co_pwritev_compressed() pass int64_t, it's updated by this
patch
vmdk:
vmdk_co_pwritev_compressed() pass int64_t, it's updated by this
patch
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver read handlers parameters which are already 64bit to
signed type.
While being here, convert also flags parameter to be BdrvRequestFlags.
Now let's consider all callers. Simple
git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?'
shows that's there three callers of driver function:
bdrv_driver_preadv() in block/io.c, passes int64_t, checked by
bdrv_check_qiov_request() to be non-negative.
qcow2_load_vmstate() does bdrv_check_qiov_request().
do_perform_cow_read() has uint64_t argument. And a lot of things in
qcow2 driver are uint64_t, so converting it is big job. But we must
not work with requests that don't satisfy bdrv_check_qiov_request(),
so let's just assert it here.
Still, the functions may be called directly, not only by drv->...
Let's check:
git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done
The only one such caller:
QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1);
...
ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0);
in tests/unit/test-bdrv-drain.c, and it's OK obviously.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix typos]
Signed-off-by: Eric Blake <eblake@redhat.com>
This function wraps bdrv_co_delete_file for the common case of removing a file,
which was just created by format driver, on an error condition.
It hides the -ENOTSUPP error, and reports all other errors otherwise.
Use it in luks driver
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20201217170904.946013-3-mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the underlying block device doesn't support the
bdrv_co_delete_file interface, an 'Error' object was leaked.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201217170904.946013-2-mlevitsk@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
This patch contains all the files, whose maintainer I could not get
from ‘get_maintainer.pl’ script.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Adapted exec.c and qdev-monitor.c to new location]
Signed-off-by: Thomas Huth <thuth@redhat.com>
My commit 'block/crypto: implement the encryption key management'
accidently allowed raw luks images to be shared between different
qemu processes without share-rw=on explicit override.
Fix that.
Fixes: bbfdae91fb ("block/crypto: implement the encryption key management")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1857490
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200719122059.59843-2-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. The previous commit did that with a Coccinelle script I
consider fairly trustworthy. This commit uses the same script with
the matching of return taken out, i.e. we convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
}
to
if (!foo(..., errp)) {
...
...
}
This is unsound: @err could still be read between afterwards. I don't
know how to express "no read of @err without an intervening write" in
Coccinelle. Instead, I manually double-checked for uses of @err.
Suboptimal line breaks tweaked manually. qdev_realize() simplified
further to placate scripts/checkpatch.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-36-armbru@redhat.com>
It's false by default, no needs to set it. We are going to drop this
variable at all, so drop it now here, it doesn't hurt.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528094405.145708-6-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608094030.670121-13-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This implements the encryption key management using the generic code in
qcrypto layer and exposes it to the user via qemu-img
This code adds another 'write_func' because the initialization
write_func works directly on the underlying file, and amend
works on instance of luks device.
This commit also adds a 'hack/workaround' I and Kevin Wolf (thanks)
made to make the driver both support write sharing (to avoid breaking the users),
and be safe against concurrent metadata update (the keyslots)
Eventually the write sharing for luks driver will be deprecated
and removed together with this hack.
The hack is that we ask (as a format driver) for BLK_PERM_CONSISTENT_READ
and then when we want to update the keys, we unshare that permission.
So if someone else has the image open, even readonly, encryption
key update will fail gracefully.
Also thanks to Daniel Berrange for the idea of
unsharing read, rather that write permission which allows
to avoid cases when the other user had opened the image read-only.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608094030.670121-8-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
rename the write_func to create_write_func, and init_func to create_init_func.
This is preparation for other write_func that will be used to update the encryption keys.
No functional changes
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200608094030.670121-7-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will be used first to implement luks keyslot management.
block_crypto_amend_opts_init will be used to convert
qemu-img cmdline to QCryptoBlockAmendOptions
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200608094030.670121-2-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It's useful to know how much space can be occupied by qcow2 persistent
bitmaps, even though such metadata is unrelated to the guest-visible
data. Report this value as an additional QMP field, present when
measuring an existing image and output format that both support
bitmaps. Update iotest 178 and 190 to updated output, as well as new
coverage in 190 demonstrating non-zero values made possible with the
recently-added qemu-img bitmap command (see 3b51ab4b).
The new 'bitmaps size:' field is displayed automatically as part of
'qemu-img measure' any time it is present in QMP (that is, any time
both the source image being measured and destination format support
bitmaps, even if the measurement is 0 because there are no bitmaps
present). If the field is absent, it means that no bitmaps can be
copied (source, destination, or both lack bitmaps, including when
measuring based on size rather than on a source image). This behavior
is compatible with an upcoming patch adding 'qemu-img convert
--bitmaps': that command will fail in the same situations where this
patch omits the field.
The addition of a new field demonstrates why we should always
zero-initialize qapi C structs; while the qcow2 driver still fully
populates all fields, the raw and crypto drivers had to be tweaked to
avoid uninitialized data.
Consideration was also given towards having a 'qemu-img measure
--bitmaps' which errors out when bitmaps are not possible, and
otherwise sums the bitmaps into the existing allocation totals rather
than displaying as a separate field, as a potential convenience
factor. But this was ultimately decided to be more complexity than
necessary when the QMP interface was sufficient enough with bitmaps
remaining a separate field.
See also: https://bugzilla.redhat.com/1779904
Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200521192137.1120211-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
bdrv_default_perms() can decide which permission profile to use based on
the BdrvChildRole, so block drivers do not need to select it explicitly.
The blkverify driver now no longer shares the WRITE permission for the
image to verify. We thus have to adjust two places in
test-block-iothread not to take it. (Note that in theory, blkverify
should behave like quorum in this regard and share neither WRITE nor
RESIZE for both of its children. In practice, it does not really
matter, because blkverify is used only for debugging, so we might as
well keep its permissions rather liberal.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-30-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commonly, they need to pass the BDRV_CHILD_IMAGE set as the
BdrvChildRole; but there are exceptions for drivers with external data
files (qcow2 and vmdk).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-26-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, it is always set to 0. Later patches in this series will
ensure that all callers pass an appropriate combination of flags.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200513110544.176672-6-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to unify child_format and child_file at some point. One of the
important things that set format drivers apart from other drivers is
that they do not expect other format nodes under them (except in the
backing chain), i.e. we must not probe formats inside of formats. That
means we need something on which to distinguish format drivers from
others, and hence this flag.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200513110544.176672-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently if you attampt to create too large file with luks you
get the following error message:
Formatting 'test.luks', fmt=luks size=17592186044416 key-secret=sec0
qemu-img: test.luks: Could not resize file: File too large
While for raw format the error message is
qemu-img: test.img: The image size is too large for file format 'raw'
The reason for this is that qemu-img checks for errono of the failure,
and presents the later error when it is -EFBIG
However crypto generic code 'swallows' the errno and replaces it
with -EIO.
As an attempt to make it better, we can make luks driver,
detect -EFBIG and in this case present a better error message,
which is what this patch does
The new error message is:
qemu-img: error creating test.luks: The requested file size is too large
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1534898
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There are several callers that need to create a new block backend from
an existing BDS; make the task slightly easier with a common helper
routine.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424190903.522087-2-eblake@redhat.com>
[mreitz: Set @ret only in error paths, see
https://lists.nongnu.org/archive/html/qemu-block/2020-04/msg01216.html]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200428192648.749066-2-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that node level interface bdrv_truncate() supports passing request
flags to the block driver, expose this on the BlockBackend level, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that block drivers can support flags for .bdrv_co_truncate, expose
the parameter in the node level interfaces bdrv_co_truncate() and
bdrv_truncate().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-3-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a new BdrvRequestFlags parameter to the .bdrv_co_truncate()
driver callbacks, and a supported_truncate_flags field in
BlockDriverState that allows drivers to advertise support for request
flags in the context of truncate.
For now, we always pass 0 and no drivers declare support for any flag.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will allow the reuse of a single generic .bdrv_co_create
implementation for several drivers.
No functional changes.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200326011218.29230-2-mlevitsk@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When using a non-UTF8 secret to create a volume using qemu-img, the
following error happens:
$ qemu-img create -f luks --object secret,id=vol_1_encrypt0,file=vol_resize_pool.vol_1.secret.qzVQrI -o key-secret=vol_1_encrypt0 /var/tmp/pool_target/vol_1 10240K
Formatting '/var/tmp/pool_target/vol_1', fmt=luks size=10485760 key-secret=vol_1_encrypt0
qemu-img: /var/tmp/pool_target/vol_1: Data from secret vol_1_encrypt0 is not valid UTF-8
However, the created file '/var/tmp/pool_target/vol_1' is left behind in the
file system after the failure. This behavior can be observed when creating
the volume using Libvirt, via 'virsh vol-create', and then getting "volume
target path already exist" errors when trying to re-create the volume.
The volume file is created inside block_crypto_co_create_opts_luks(), in
block/crypto.c. If the bdrv_create_file() call is successful but any
succeeding step fails*, the existing 'fail' label does not take into
account the created file, leaving it behind.
This patch changes block_crypto_co_create_opts_luks() to delete
'filename' in case of failure. A failure in this point means that
the volume is now truncated/corrupted, so even if 'filename' was an
existing volume before calling qemu-img, it is now unusable. Deleting
the file it is not much worse than leaving it in the filesystem in
this scenario, and we don't have to deal with checking the file
pre-existence in the code.
* in our case, block_crypto_co_create_generic calls qcrypto_block_create,
which calls qcrypto_block_luks_create, and this function fails when
calling qcrypto_secret_lookup_as_utf8.
Reported-by: Srikanth Aithal <bssrikanth@in.ibm.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200130213907.2830642-4-danielhb413@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add qemu-img measure support in the "luks" block driver.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200221112522.1497712-3-stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When truncating a format node, the @exact parameter is generally handled
simply by virtue of the format storing the new size in the image
metadata. Such formats do not need to pass on the parameter to their
file nodes.
There are exceptions, though:
- raw and crypto cannot store the image size, and thus must pass on
@exact.
- When using qcow2 with an external data file, it just makes sense to
keep its size in sync with the qcow2 virtual disk (because the
external data file is the virtual disk). Therefore, we should pass
@exact when truncating it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190918095144.955-7-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We have two drivers (iscsi and file-posix) that (in some cases) return
success from their .bdrv_co_truncate() implementation if the block
device is larger than the requested offset, but cannot be shrunk. Some
callers do not want that behavior, so this patch adds a new parameter
that they can use to turn off that behavior.
This patch just adds the parameter and lets the block/io.c and
block/block-backend.c functions pass it around. All other callers
always pass false and none of the implementations evaluate it, so that
this patch does not change existing behavior. Future patches take care
of that.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190918095144.955-5-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This adds a new parameter to blk_new() which requires its callers to
declare from which AioContext this BlockBackend is going to be used (or
the locks of which AioContext need to be taken anyway).
The given context is only stored and kept up to date when changing
AioContexts. Actually applying the stored AioContext to the root node
is saved for another commit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new field can be set by block drivers to list the runtime options
they accept that may influence the contents of the respective BDS. As of
a follow-up patch, this list will be used by the common
bdrv_refresh_filename() implementation to decide which options to put
into BDS.full_open_options (and consequently whether a JSON filename has
to be created), thus freeing the drivers of having to implement that
logic themselves.
Additionally, this patch adds the field to all of the block drivers that
need it and sets it accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-22-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Inform a user in case qcow2_get_specific_info fails to obtain
QCOW2 image specific information. This patch is preliminary to
the one "qcow2: Add list of bitmaps to ImageInfoSpecificQCow2".
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1549638368-530182-2-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The two thing that should be handled are cipher and ivgen. For ivgen
the solution is just mutex, as iv calculations should not be long in
comparison with encryption/decryption. And for cipher let's just keep
per-thread ciphers.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Format drivers such as qcow2 don't allow sharing the same image between
two QEMU instances in order to prevent image corruptions, because of
metadata cache. LUKS driver don't modify metadata except for when
creating image, so it is safe to relax the permission. This makes
share-rw=on property work on virtual devices.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block_crypto_open_opts_init() and block_crypto_create_opts_init()
contain a virtual visit of QCryptoBlockOptions and
QCryptoBlockCreateOptions less member "format", respectively.
Change their callers to put member "format" in the QDict, so they can
use the generated visitors for these types instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_truncate() is an operation that can block (even for a quite long
time, depending on the PreallocMode) in I/O paths that shouldn't block.
Convert it to a coroutine_fn so that we have the infrastructure for
drivers to make their .bdrv_co_truncate implementation asynchronous.
This change could potentially introduce new race conditions because
bdrv_truncate() isn't necessarily executed atomically any more. Whether
this is a problem needs to be evaluated for each block driver that
supports truncate:
* file-posix/win32, gluster, iscsi, nfs, rbd, ssh, sheepdog: The
protocol drivers are trivially safe because they don't actually yield
yet, so there is no change in behaviour.
* copy-on-read, crypto, raw-format: Essentially just filter drivers that
pass the request to a child node, no problem.
* qcow2: The implementation modifies metadata, so it needs to hold
s->lock to be safe with concurrent I/O requests. In order to avoid
double locking, this requires pulling the locking out into
preallocate_co() and using qcow2_write_caches() instead of
bdrv_flush().
* qed: Does a single header update, this is fine without locking.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Coverity can't see that qobject_input_visitor_new_flat_confused()
returns non-null when it doesn't set @local_err. Check the return
value instead, like all the other callers do.
Fixes: CID 1393615
Fixes: CID 1393616
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remaining uses of qobject_input_visitor_new_keyval() in the block
subsystem:
* block_crypto_open_opts_init()
Currently doesn't visit any non-string scalars, thus safe. It's
called from
- block_crypto_open_luks()
Creates the QDict with qemu_opts_to_qdict_filtered(), which
creates only string scalars, but has a TODO asking for other types.
- qcow_open()
- qcow2_open(), qcow2_co_invalidate_cache(), qcow2_reopen_prepare()
* block_crypto_create_opts_init(), called from
- block_crypto_co_create_opts_luks()
Also creates the QDict with qemu_opts_to_qdict_filtered().
* vdi_co_create_opts()
Also creates the QDict with qemu_opts_to_qdict_filtered().
Replace these uses by qobject_input_visitor_new_flat_confused() for
robustness. This adds crumpling. Right now, that's a no-op, but if
we ever extend these things in non-flat ways, crumpling will be
needed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit e39e959e fixed an invalid assertion in the .bdrv_length
implementation, but left a similar assertion in place for
.bdrv_truncate. Instead of crashing when the user requests a too large
image size, fail gracefully.
A file size of exactly INT64_MAX caused failure before, but is actually
legal.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When you request an image size close to UINT64_MAX, the addition of the
crypto header may cause an integer overflow. Catch it instead of
silently truncating the image size.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The .bdrv_getlength implementation of the crypto block driver asserted
that the payload offset isn't after EOF. This is an invalid assertion to
make as the image file could be corrupted. Instead, check it and return
-EIO if the file is too small for the payload offset.
Zero length images are fine, so trigger -EIO only on offset > len, not
on offset >= len as the assertion did before.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Peter Maydell
Emanuele Giuseppe Esposito
Vladimir Sementsov-Ogievskiy
Maxim Levitsky
Chetan Pant
Markus Armbruster
Eric Blake
Max Reitz
Kevin Wolf
Daniel Henrique Barboza
Stefan Hajnoczi
Alberto Garcia
Andrey Shinkevich
Fam Zheng
Michael S. Tsirkin
Marc-André Lureau