When we connect to vnc by websocket channel, and disconnect
(maybe by some network exception) before handshake,
qemu will left CLOSE_WAIT socket and never close it
After 04d2529da2 ("ui: convert VNC server to use QIOChannelSocket")
and dd154c4d9f ("io: fix handling of EOF / error conditions in websock GSource"),
the vnc call qio_channel_add_watch only care about G_IO_IN,
but mising G_IO_HUP and G_IO_ERR.
When the websocket channel get EOF or error, it cannot callback,
because the caller ignore the event, that leads to resource leak
We need handle G_IO_HUP and G_IO_ERR event, then cleanup the channel
Fixes: 04d2529da2 ("ui: convert VNC server to use QIOChannelSocket")
Fixes: dd154c4d9f ("io: fix handling of EOF / error conditions in websock GSource")
Cc: qemu-stable@nongnu.org
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Message-id: 20201029032241.11040-1-dinghui@sangfor.com.cn
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Thanks to the monitors' coroutine support (merge commit b7092cda1b),
the screendump handler can trigger a graphic_hw_update(), yield and let
the main loop run until update is done. Then the handler is resumed, and
ppm_save() will write the screen image to disk in the coroutine context.
The IO is still blocking though, as the file is set blocking so far,
this could be addressed by some future change (with other caveats).
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1230527
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20201027133602.3038018-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function is going to be called from a coroutine, and may yield.
Let's ensure our image reference doesn't change over time (due to resize
etc) by keeping a ref.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201027133602.3038018-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The assert() was added in commit b681a1c73e ("block: Repair the
throttling code."), when the qemu_co_queue_do_restart() function
required to be running in a coroutine. It was later made unnecessary in
commit a9d9235567 ("coroutine-lock: reschedule coroutine on the
AioContext it was running on").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201027133602.3038018-2-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Note that whilst the device does not do anything with these values, they are
logged with trace events and stored to allow future implementation.
The default flow control is set to none at reset as documented in the Linux
ftdi_sio.h header file.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20201027150456.24606-9-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Also implement the behaviour reported in Linux's ftdi_sio.c whereby if an invalid
data_bits value is provided then the hardware defaults to using 8.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201027150456.24606-8-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some operating systems will generate a new device ID when a USB device is unplugged
and then replugged into the USB. If this is done whilst switching between multiple
applications over a virtual serial port, the change of device ID requires going
back into the OS/application to locate the new device accordingly.
Add a new always-plugged property that if specified will ensure that the device
always remains attached to the USB regardless of the state of the backend
chardev.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20201027150456.24606-7-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The DeviceOutVendor and DeviceInVendor macros can be replaced with their
equivalent VendorDeviceOutRequest and VendorDeviceRequest macros from usb.h.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201027150456.24606-6-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Refuse get_config() in excess of sizeof(struct virtio_blk_config).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201027173528.213464-6-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Refuse get_config() requests in excess of sizeof(struct virtio_blk_config).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201027173528.213464-5-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO 1.0 devices have little-endian configuration space. The
vhost-user-blk-server.c code already uses little-endian for virtqueue
processing but not for the configuration space fields. Fix this so the
vhost-user-blk export works on big-endian hosts.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201027173528.213464-4-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make it possible to compile out the vhost-user-blk server. It is enabled
by default on Linux.
Note that vhost-user-server.c depends on libvhost-user, which requires
CONFIG_LINUX. The CONFIG_VHOST_USER dependency was erroneous since that
option controls vhost-user frontends (previously known as "master") and
not device backends (previously known as "slave").
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201027173528.213464-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201027173528.213464-2-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Virtqueue has split and packed, so before setting inflight,
you need to inform the back-end virtqueue format.
Signed-off-by: Jin Yu <jin.yu@intel.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20201103123617.28256-1-jin.yu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit adb29c0273.
The commit broke -device vhost-user-blk-pci because the
vhost_dev_prepare_inflight() function it introduced segfaults in
vhost_dev_set_features() when attempting to access struct vhost_dev's
vdev pointer before it has been assigned.
To reproduce the segfault simply launch a vhost-user-blk device with the
contrib vhost-user-blk device backend:
$ build/contrib/vhost-user-blk/vhost-user-blk -s /tmp/vhost-user-blk.sock -r -b /var/tmp/foo.img
$ build/qemu-system-x86_64 \
-device vhost-user-blk-pci,id=drv0,chardev=char1,addr=4.0 \
-object memory-backend-memfd,id=mem,size=1G,share=on \
-M memory-backend=mem,accel=kvm \
-chardev socket,id=char1,path=/tmp/vhost-user-blk.sock
Segmentation fault (core dumped)
Cc: Jin Yu <jin.yu@intel.com>
Cc: Raphael Norwitz <raphael.norwitz@nutanix.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102165709.232180-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix the bug that while Check qemu supported netdev,
there is no vhost-vdpa
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20201016030909.9522-2-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
fix the bug that fd will still open after the cleanup
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20201016030909.9522-1-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IOMMUs may declare memory regions spanning from 0 to UINT64_MAX. When
attempting to deal with such region, vfio_listener_region_del() passes a
size of 2^64 to int128_get64() which throws an assertion failure. Even
ignoring this, the VFIO_IOMMU_DMA_MAP ioctl cannot handle this size
since the size field is 64-bit. Split the request in two.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20201030180510.747225-11-jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu_semihosting_console_init uses semihosting.chardev which is set
by qemu_semihosting_connect_chardevs. Thus qemu_semihosting_connect_chardevs
has to be called first.
Both have to be called after processing -serial and friends though, so
that the semihosting console can connect to a multiplexer as in
"-serial mon:stdio -semihosting-config chardev=serial0"
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Fixes: 619985e937 ("semihosting: defer connect_chardevs a little more to use serialx", 2020-07-27)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The code did not add offsets to FlatRange bases, so we did not fuzz
offsets within device MemoryRegions.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201029172901.534442-4-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We should be checking that the device is trying to read from RAM, before
filling the region with data. Otherwise, we will try to populate
nonsensical addresses in RAM for callbacks on PIO/MMIO reads. We did
this originally, however the final version I sent had the line commented
out..
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201029172901.534442-3-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This code had all sorts of issues. We used a loop similar to
address_space_write_rom, but I did not remove a "break" that only made
sense in the context of the switch statement in the original code. Then,
after the loop, we did a separate qtest_memwrite over the entire DMA
access range, defeating the purpose of the loop. Additionally, we
increment the buf pointer, and then try to g_free() it. Fix these
problems.
Reported-by: OSS-Fuzz (Issue 26725)
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reported-by: OSS-Fuzz (Issue 26691)
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201029172901.534442-2-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Microchip PFSoC to allow unmodified HSS and Linux boots.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl+hdREACgkQIeENKd+X
cFSb8gf+M3djD952RKJkqRFYEDoRkdsmfgSCR1vv4gv8tZyRoEoFT0r91Ne3xnu4
8UN6esV+n2ugbpXNIYxb/ZfBo664jWPYLIPFxaslEUYjshzxPmpvKFxF33k0e0MA
Xs41G8xeQmRijOFzERNWBTYdpez579MIy2mWUWlDcssZaayJyLkNDrdP4i938sry
GYsyr88ekeO/u/2SbviKQ7wkneqJZCFDGeztsAi3j8VLFzQeA2WvKx2z/cG4e4u5
33rl6UGuYS9/g8uS9UqOodkzWtGe9Sw/ddMCgFkMcMqa9DNUznd4b9FoUv2zRmO8
qIC7UCBsjt1v+lkofH7m4+rqm1BaFQ==
=SQpo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20201103' into staging
This series adds support for migration to RISC-V QEMU and expands the
Microchip PFSoC to allow unmodified HSS and Linux boots.
# gpg: Signature made Tue 03 Nov 2020 15:19:45 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20201103:
target/riscv/csr.c : add space before the open parenthesis '('
hw/riscv: microchip_pfsoc: Hook the I2C1 controller
hw/riscv: microchip_pfsoc: Correct DDR memory map
hw/riscv: microchip_pfsoc: Map the reserved memory at address 0
hw/riscv: microchip_pfsoc: Connect the SYSREG module
hw/misc: Add Microchip PolarFire SoC SYSREG module support
hw/riscv: microchip_pfsoc: Connect the IOSCB module
hw/misc: Add Microchip PolarFire SoC IOSCB module support
hw/riscv: microchip_pfsoc: Connect DDR memory controller modules
hw/misc: Add Microchip PolarFire SoC DDR Memory Controller support
hw/riscv: microchip_pfsoc: Document where to look at the SoC memory maps
target/riscv: Add sifive_plic vmstate
target/riscv: Add V extension state description
target/riscv: Add H extension state description
target/riscv: Add PMP state description
target/riscv: Add basic vmstate description of CPU
target/riscv: Merge m/vsstatus and m/vsstatush into one uint64_t unit
hw/riscv: virt: Allow passing custom DTB
hw/riscv: sifive_u: Allow passing custom DTB
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MIPSR6 (not only MIPS32R6) processors support unaligned access in
hardware, so set MO_UNALN in their default_tcg_memop_mask. Btw, new
Loongson-3 (such as Loongson-3A4000) also support unaligned access,
since both old and new Loongson-3 use the same binaries, we can simply
set MO_UNALN for all Loongson-3 processors.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1604053541-27822-3-git-send-email-chenhc@lemote.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201016143509.26692-1-chetan4windows@gmail.com>
[PMD: Split hw/ vs target/]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
According to the loongson spec
(http://www.loongson.cn/uploadfile/cpu/3B1500/Loongson_3B1500_cpu_user_1.pdf)
and the macro definition(#define R_PERCORE_ISR(x) (0x40 + 0x8 * x)), we know
that the ISR size per CORE is 8, so here we need to divide
(addr - R_PERCORE_ISR(0)) by 8, not 4.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <5FA12391.8090400@huawei.com>
[PMD: Shortened subject]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201023122633.19466-1-chetan4windows@gmail.com>
[PMD: Added hw/mips/ prefix in subject]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201016143509.26692-1-chetan4windows@gmail.com>
[PMD: Split hw/ vs target/]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We deprecated the support for the 'r4k' machine for the 5.0 release
(commit d32dc61421), which means that our deprecation policy allows
us to drop it in release 5.2. Remove the code.
To repeat the rationale from the deprecation note:
- this virtual machine has no specification
- the Linux kernel dropped support for it 10 years ago
Users are recommended to use the Malta board instead.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20201102201311.2220005-1-f4bug@amsat.org>
We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".
In addition, fix two error format problems found by checkpatch.pl:
ERROR: space required after that ',' (ctx:VxV)
+ fprintf(stderr,"%s attributes=0x%02x begin=%u size=%d\n",
^
ERROR: line over 90 characters
+ fprintf(stderr, "%d, %s (%u, %d)\n", i, commit->path ? commit->path : "(null)", commit->param.rename.cluster, commit->action);
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-Id: <5FA12620.6030705@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
pylint complains about the use of super with the current class and
instance as arguments in VM.__init__():
iotests.py:546:8: R1725: Consider using Python 3 style super() without arguments (super-with-arguments)
No reason not to follow the advice and make it happy, so let's do this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027163806.290960-4-kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When run with Python 3.9, pylint incorrectly warns about things like
Optional[foo] because it doesn't recognise Optional as unsubscriptable.
This is a known pylint bug:
https://github.com/PyCQA/pylint/issues/3882
Just disable this check to get rid of the warnings.
Disabling this shouldn't make us miss any real bug because mypy also
has a similar check ("... is not indexable").
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027163806.290960-3-kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 1847a4a8c2 clarified that event_wait() can return None (though
only with timeout=0) and commit f12a282ff4 annotated it as returning
Optional[QMPMessage].
Type checks in wait_migration() fail because of the unexpected optional
return type:
iotests.py:750: error: Value of type variable "Msg" of "log" cannot be "Optional[Dict[str, Any]]"
iotests.py:751: error: Value of type "Optional[Dict[str, Any]]" is not indexable
iotests.py:754: error: Value of type "Optional[Dict[str, Any]]" is not indexable
Fortunately, the non-zero default timeout is used in the event_wait()
call, so we can make mypy happy by just asserting this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027163806.290960-2-kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
@sn_opts is initialized at the beginning, so it should be deleted
after jumping to the lable 'fail_getopt'
Signed-off-by: Guoyi Tu <tu.guoyi@h3c.com>
Message-Id: <6ff1c5d372944494be3932274f75485d@h3c.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 9ce44e2ce2 "qmp: Move dispatcher to a coroutine" modified
aio_poll() in util/aio-posix.c to avoid an assertion failure. This
change is missing in util/aio-win32.c.
Apply the changes to util/aio-posix.c to util/aio-win32.c too.
This fixes an assertion failure on Windows whenever QEMU exits.
$ ./qemu-system-x86_64.exe -machine pc,accel=tcg -display gtk
**
ERROR:../qemu/util/aio-win32.c:337:aio_poll: assertion failed:
(in_aio_context_home_thread(ctx))
Bail out! ERROR:../qemu/util/aio-win32.c:337:aio_poll: assertion
failed: (in_aio_context_home_thread(ctx))
Fixes: 9ce44e2ce2 ("qmp: Move dispatcher to a coroutine")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20201021064033.8600-1-vr_qemu@t-online.de>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix code style. Space required before the open parenthesis '('.
Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com>
Signed-off-by: Kai Deng <dengkai1@huawei.com>
Reported-by: Euler Robot <euler.robot@huawei.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201030004815.4172849-1-zhangxinhao1@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The latest SD card image [1] released by Microchip ships a Linux
kernel with built-in PolarFire SoC I2C driver support. The device
tree file includes the description for the I2C1 node hence kernel
tries to probe the I2C1 device during boot.
It is enough to create an unimplemented device for I2C1 to allow
the kernel to continue booting to the shell.
[1] ftp://ftpsoc.microsemi.com/outgoing/core-image-minimal-dev-icicle-kit-es-sd-20201009141623.rootfs.wic.gz
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-11-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When system memory is larger than 1 GiB (high memory), PolarFire SoC
maps it at address 0x10_0000_0000. Address 0xC000_0000 and above is
aliased to the same 1 GiB low memory with different cache attributes.
At present QEMU maps the system memory contiguously from 0x8000_0000.
This corrects the wrong QEMU logic. Note address 0x14_0000_0000 is
the alias to the high memory, and even physical memory is only 1 GiB,
the HSS codes still tries to probe the high memory alias address.
It seems there is no issue on the real hardware, so we will have to
take that into the consideration in our emulation. Due to this, we
we increase the default system memory size to 1537 MiB (the minimum
required high memory size by HSS) so that user gets notified an error
when less than 1537 MiB is specified.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201101170538.3732-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Somehow HSS needs to access address 0 [1] for the DDR calibration data
which is in the chipset's reserved memory. Let's map it.
[1] See the config_copy() calls in various places in ddr_setup() in
the HSS source codes.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-9-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Previously SYSREG was created as an unimplemented device. Now that
we have a simple SYSREG module, connect it.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-8-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This creates a minimum model for Microchip PolarFire SoC SYSREG
module. It only implements the ENVM_CR register to tell guest
software that eNVM is running at the configured divider rate.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-7-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Previously IOSCB_CFG was created as an unimplemented device. With
the new IOSCB model, its memory range is already covered by the
IOSCB hence remove the previous unimplemented device creation in
the SoC codes.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-6-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This creates a model for PolarFire SoC IOSCB [1] module. It actually
contains lots of sub-modules like various PLLs to control different
peripherals. Only the mininum capabilities are emulated to make the
HSS DDR memory initialization codes happy. Lots of sub-modules are
created as an unimplemented devices.
[1] PF_SoC_RegMap_V1_1/MPFS250T/mpfs250t_ioscb_memmap_dri.htm in
https://www.microsemi.com/document-portal/doc_download/1244581-polarfire-soc-register-map
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-5-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Connect DDR SGMII PHY module and CFG module to the PolarFire SoC.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-4-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
