This reverts commit b320e21c48,
which accidentally broke TCG, because it made the TCG -cpu max
report the presence of MTE to the guest even if the board hadn't
enabled MTE by wiring up the tag RAM. This meant that if the guest
then tried to use MTE QEMU would segfault accessing the
non-existent tag RAM:
==346473==ERROR: UndefinedBehaviorSanitizer: SEGV on unknown address (pc 0x55f328952a4a bp 0x00000213a400 sp 0x7f7871859b80 T346476)
==346473==The signal is caused by a READ memory access.
==346473==Hint: this fault was caused by a dereference of a high value address (see register values below). Disassemble the provided pc to learn which register was used.
#0 0x55f328952a4a in address_space_to_flatview /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/memory.h:1108:12
#1 0x55f328952a4a in address_space_translate /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/exec/memory.h:2797:31
#2 0x55f328952a4a in allocation_tag_mem /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../target/arm/tcg/mte_helper.c:176:10
#3 0x55f32895366c in helper_stgm /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/arm-clang/../../target/arm/tcg/mte_helper.c:461:15
#4 0x7f782431a293 (<unknown module>)
It's also not clear that the KVM logic is correct either:
MTE defaults to on there, rather than being only on if the
board wants it on.
Revert the whole commit for now so we can sort out the issues.
(We didn't catch this in CI because we have no test cases in
avocado that use guests with MTE support.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230519145808.348701-1-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmRmgQgACgkQewJE+xLe
RCJLtAf8C/0kQRa4mjnbsztXuFyca53UxAv3BSBEDla4ZcMfFBoVJsGB3OP7IPXd
KBQpkLyJAVye9idex5xqdp9nIfoGKDTsc6YtCfGujZ17cDpzLRDpHdUTex8PcZYK
wpfM3hoVJsYRBMsojZ4OaxatjFQ+FWzrIH6FcgH086Q8TH4w9dZLNEJzHC4lOj0s
7qOuw2tgm+vOVlzsk/fv6/YD/BTeZTON3jgTPvAnvdRLb/482UpM9JkJ8E4rbte3
Ss5PUK8QTQHU0yamspGy/PfsYxiptM+jIWGd836fAGzwF12Ug27mSc1enndRtQVW
pQTdnOnWuuRzOwEpd7x3xh9upACm4g==
=1CyJ
-----END PGP SIGNATURE-----
Merge tag 'pull-hex-20230518-1' of https://github.com/quic/qemu into staging
Hexagon update
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmRmgQgACgkQewJE+xLe
# RCJLtAf8C/0kQRa4mjnbsztXuFyca53UxAv3BSBEDla4ZcMfFBoVJsGB3OP7IPXd
# KBQpkLyJAVye9idex5xqdp9nIfoGKDTsc6YtCfGujZ17cDpzLRDpHdUTex8PcZYK
# wpfM3hoVJsYRBMsojZ4OaxatjFQ+FWzrIH6FcgH086Q8TH4w9dZLNEJzHC4lOj0s
# 7qOuw2tgm+vOVlzsk/fv6/YD/BTeZTON3jgTPvAnvdRLb/482UpM9JkJ8E4rbte3
# Ss5PUK8QTQHU0yamspGy/PfsYxiptM+jIWGd836fAGzwF12Ug27mSc1enndRtQVW
# pQTdnOnWuuRzOwEpd7x3xh9upACm4g==
# =1CyJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 May 2023 12:48:24 PM PDT
# gpg: using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* tag 'pull-hex-20230518-1' of https://github.com/quic/qemu: (44 commits)
Hexagon (linux-user/hexagon): handle breakpoints
Hexagon (gdbstub): add HVX support
Hexagon (gdbstub): fix p3:0 read and write via stub
Hexagon: add core gdbstub xml data for LLDB
gdbstub: add test for untimely stop-reply packets
gdbstub: only send stop-reply packets when allowed to
Remove test_vshuff from hvx_misc tests
Hexagon (decode): look for pkts with multiple insns at the same slot
Hexagon (iclass): update J4_hintjumpr slot constraints
Hexagon: append eflags to unknown cpu model string
Hexagon: list available CPUs with `-cpu help`
Hexagon (target/hexagon/*.py): raise exception on reg parsing error
target/hexagon: fix = vs. == mishap
Hexagon (target/hexagon) Additional instructions handled by idef-parser
Hexagon (target/hexagon) Move items to DisasContext
Hexagon (target/hexagon) Move pkt_has_store_s1 to DisasContext
Hexagon (target/hexagon) Move pred_written to DisasContext
Hexagon (target/hexagon) Move new_pred_value to DisasContext
Hexagon (target/hexagon) Move new_value to DisasContext
Hexagon (target/hexagon) Make special new_value for USR
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Each slot in a packet can be assigned to at most one instruction.
Although the assembler generally ought to enforce this rule, we better
be safe than sorry and also do some check to properly throw an "invalid
packet" exception on wrong slot assignments.
This should also make it easier to debug possible future errors caused
by missing updates to `find_iclass_slots()` rules in
target/hexagon/iclass.c.
Co-authored-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <f8b829443523568823d062adf8bf6659bc6d4a3f.1683552984.git.quic_mathbern@quicinc.com>
The Hexagon PRM says that "The assembler automatically encodes
instructions in the packet in the proper order. In the binary encoding
of a packet, the instructions must be ordered from Slot 3 down to
Slot 0."
Prior to the architecture version v73, the slot constraints from
instruction "hintjr" only allowed it to be executed at slot 2.
With that in mind, consider the packet:
{
hintjr(r0)
nop
nop
if (!p0) memd(r1+#0) = r1:0
}
To satisfy the ordering rule quoted from the PRM, the assembler would,
thus, move one of the nops to the first position, so that it can be
assigned to slot 3 and the subsequent hintjr to slot 2.
However, since v73, hintjr can be executed at either slot 2 or 3. So
there is no need to reorder that packet and the assembler will encode it
as is. When QEMU tries to execute it, however, we end up hitting a
"misaliged store" exception because both the store and the hintjr will
be assigned to store 0, and some functions like `slot_is_predicated()`
expect the decode machinery to assign only one instruction per slot. In
particular, the mentioned function will traverse the packet until it
finds the first instruction at the desired slot which, for slot 0, will
be hintjr. Since hintjr is not predicated, the result is that we try to
execute the store regardless of the predicate. And because the predicate
is false, we had not previously loaded hex_store_addr[0] or
hex_store_width[0]. As a result, the store will decide de width based on
trash memory, causing it to be misaligned.
Update the slot constraints for hintjr so that QEMU can properly handle
such encodings.
Note: to avoid similar-but-not-identical issues in the future, we should
look for multiple instructions at the same slot during decoding time and
throw an invalid packet exception. That will be done in the subsequent
commit.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <0fcd8293642c6324119fbbab44741164bcbd04fb.1673616964.git.quic_mathbern@quicinc.com>
Currently, qemu-hexagon only models the v67 cpu. Nonetheless if we try
to get this information with `-cpu help`, qemu just exists with an error
code and no output. Let's correct that.
The code is basically a copy from target/alpha/cpu.h, but we strip the
"-hexagon-cpu" suffix before printing. This is to avoid confusing
situations like the following:
$ qemu-hexagon -cpu help
Available CPUs:
v67-hexagon-cpu
$ qemu-hexagon -cpu v67-hexagon-cpu ./prog
qemu-hexagon: unable to find CPU model 'v67-hexagon-cpu'
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <b946e17c7e17eed9095700b54c5ead36e5d55dfa.1683225804.git.quic_mathbern@quicinc.com>
Currently, the python scripts used for the hexagon building will not
abort the compilation when there is an error parsing a register. Let's
make the compilation properly fail in such cases by rasing an exception
instead of just printing a warning message, which might get lost in the
output.
This patch was generated with:
git grep -l "Bad register" *hexagon* | \
xargs sed -i "" -e 's/print("Bad register parse: "[, ]*\([^)]*\))/hex_common.bad_register(\1)/g'
Plus the bad_register() helper added to hex_common.py.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <1f5dbd92f68fdd89e2647e4ba527a2c32cf0f070.1683217043.git.quic_mathbern@quicinc.com>
**** Changes in v2 ****
Fix yyassert's for sign and zero extends
Coverity reports a parameter that is "set but never used". This is caused
by an assignment operator being used instead of equality.
Co-authored-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Tested-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230428204411.1400931-1-tsimpson@quicinc.com>
**** Changes in v3 ****
Fix bugs exposed by dpmpyss_rnd_s0 instruction
Set correct size/signedness for constants
Test cases added to tests/tcg/hexagon/misc.c
**** Changes in v2 ****
Fix bug in imm_print identified in clang build
Currently, idef-parser skips all floating point instructions. However,
there are some floating point instructions that can be handled.
The following instructions are now parsed
F2_sfimm_p
F2_sfimm_n
F2_dfimm_p
F2_dfimm_n
F2_dfmpyll
F2_dfmpylh
To make these instructions work, we fix some bugs in parser-helpers.c
gen_rvalue_extend
gen_cast_op
imm_print
lexer properly sets size/signedness of constants
Test cases added to tests/tcg/hexagon/fpstuff.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230501203125.4025991-1-tsimpson@quicinc.com>
The following items in the CPUHexagonState are only used for bookkeeping
within the translation of a packet. With recent changes that eliminate
the need to free TCGv variables, these make more sense to be transient
and kept in DisasContext.
The following items are moved
dczero_addr
branch_taken
this_PC
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-22-tsimpson@quicinc.com>
The pkt_has_store_s1 field is only used for bookkeeping helpers with
a load. With recent changes that eliminate the need to free TCGv
variables, it makes more sense to make this transient.
These helpers already take the instruction slot as an argument. We
combine the slot and pkt_has_store_s1 into a single argument called
slotval.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-21-tsimpson@quicinc.com>
The pred_written variable in the CPUHexagonState is only used for
bookkeeping within the translation of a packet. With recent changes
that eliminate the need to free TCGv variables, these make more sense
to be transient and kept in DisasContext.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-20-tsimpson@quicinc.com>
The new_pred_value array in the CPUHexagonState is only used for
bookkeeping within the translation of a packet. With recent changes
that eliminate the need to free TCGv variables, these make more sense
to be transient and kept in DisasContext.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-19-tsimpson@quicinc.com>
The new_value array in the CPUHexagonState is only used for bookkeeping
within the translation of a packet. With recent changes that eliminate
the need to free TCGv variables, these make more sense to be transient
and kept in DisasContext.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-18-tsimpson@quicinc.com>
Precursor to moving new_value from the global state to DisasContext
USR will need to stay in the global state because some helpers will
set it's value
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-17-tsimpson@quicinc.com>
The following have overrides
S2_insert
S2_insert_rp
S2_asr_r_svw_trun
A2_swiz
These instructions have semantics that write to the destination
before all the operand reads have been completed. Therefore,
the idef-parser versions were disabled with the short-circuit patch.
Test cases added to tests/tcg/hexagon/read_write_overlap.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-16-tsimpson@quicinc.com>
The generated helpers for HVX use pass-by-reference, so they can't
short-circuit when the reads/writes overlap. The instructions with
overrides are OK because they use tcg_gen_gvec_*.
We add a flag has_hvx_helper to DisasContext and extend gen_analyze_funcs
to set the flag when the instruction is an HVX instruction with a
generated helper.
We add an override for V6_vcombine so that it can be short-circuited
along with a test case in tests/tcg/hexagon/hvx_misc.c
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-15-tsimpson@quicinc.com>
In certain cases, we can avoid the overhead of writing to future_VRegs
and write directly to VRegs. We consider HVX reads/writes when computing
ctx->need_commit. Then, we can early-exit from gen_commit_hvx.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-14-tsimpson@quicinc.com>
In certain cases, we can avoid the overhead of writing to hex_new_pred_value
and write directly to hex_pred. We consider predicate reads/writes when
computing ctx->need_commit. The get_result_pred() function uses this
field to decide between hex_new_pred_value and hex_pred. Then, we can
early-exit from gen_pred_writes.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-13-tsimpson@quicinc.com>
In certain cases, we can avoid the overhead of writing to hex_new_value
and write directly to hex_gpr. We add need_commit field to DisasContext
indicating if the end-of-packet commit is needed. If it is not needed,
get_result_gpr() and get_result_gpr_pair() can return hex_gpr.
We pass the ctx->need_commit to helpers when needed.
Finally, we can early-exit from gen_reg_writes during packet commit.
There are a few instructions whose semantics write to the result before
reading all the inputs. Therefore, the idef-parser generated code is
incompatible with short-circuit. We tell idef-parser to skip them.
For debugging purposes, we add a cpu property to turn off short-circuit.
When the short-circuit property is false, we skip the analysis and force
the end-of-packet commit.
Here's a simple example of the TCG generated for
0x004000b4: 0x7800c020 { R0 = #0x1 }
BEFORE:
---- 004000b4
movi_i32 new_r0,$0x1
mov_i32 r0,new_r0
AFTER:
---- 004000b4
movi_i32 r0,$0x1
This patch reintroduces a use of check_for_attrib, so we remove the
G_GNUC_UNUSED added earlier in this series.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20230427230012.3800327-12-tsimpson@quicinc.com>
Have gen_analyze_funcs mark the registers that are read by the
instruction. We also mark the implicit reads using instruction
attributes.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-11-tsimpson@quicinc.com>
When generating TCG, make sure we have read all the operand registers
before writing to the destination registers.
This is a prerequesite for short-circuiting where the source and dest
operands could be the same.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-10-tsimpson@quicinc.com>
Only endloop instructions will conditionally write to a predicate.
When there is an endloop instruction, we preload the values into
new_pred_value.
The only place pred_written is needed is when HEX_DEBUG is on.
We remove the last use of check_for_attrib. However, new uses will be
introduced later in this series, so we mark it with G_GNUC_UNUSED.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-9-tsimpson@quicinc.com>
These instructions have implicit writes to registers, so we don't
want them to be helpers when idef-parser is off.
The following instructions are overriden
S2_cabacdecbin
SA1_cmpeqi
Remove the log_pred_write function from op_helper.c
Remove references in macros.h
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-8-tsimpson@quicinc.com>
With the overrides added in prior commits, this function is not used
Remove references in macros.h
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-7-tsimpson@quicinc.com>
These instructions have implicit reads from p0, so we don't want
them in helpers when idef-parser is off.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-6-tsimpson@quicinc.com>
These instructions have implicit writes to registers, so we don't
want them to be helpers when idef-parser is off.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-5-tsimpson@quicinc.com>
These instructions have implicit writes to registers, so we don't
want them to be helpers when idef-parser is off.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-4-tsimpson@quicinc.com>
Add DisasContext arg to gen_log_reg_write_pair also
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427230012.3800327-3-tsimpson@quicinc.com>
The following instructions are added
J2_callrh
J2_junprh
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-9-tsimpson@quicinc.com>
The following instructions are added
V6_vasrvuhubrndsat
V6_vasrvuhubsat
V6_vasrvwuhrndsat
V6_vasrvwuhsat
V6_vassign_tmp
V6_vcombine_tmp
V6_vmpyuhvs
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-7-tsimpson@quicinc.com>
The following instructions are added
V6_v6mpyvubs10_vxx
V6_v6mpyhubs10_vxx
V6_v6mpyvubs10
V6_v6mpyhubs10
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-5-tsimpson@quicinc.com>
The following instructions are added
L2_loadw_aq
L4_loadd_aq
R6_release_at_vi
R6_release_st_vi
S2_storew_rl_at_vi
S4_stored_rl_at_vi
S2_storew_rl_st_vi
S4_stored_rl_st_vi
The release instructions are nop's in qemu. The others behave as
loads/stores.
The encodings for these instructions changed some "don't care" bits
L2_loadw_locked
L4_loadd_locked
S2_storew_locked
S4_stored_locked
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-3-tsimpson@quicinc.com>
Add support for the ELF flags
Move target/hexagon/cpu.[ch] to be v73
Change the compiler flag used by "make check-tcg"
The decbin instruction is removed in Hexagon v73, so check the
version before trying to compile the instruction.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-2-tsimpson@quicinc.com>
* target/i386: new features
* target/i386: AVX fixes
* configure: create a python venv unconditionally
* meson: bump to 0.63.0 and move tests from configure
* meson: Pass -j option to sphinx
* drop support for Python 3.6
* fix check-python-tox
* fix "make clean" in the source directory
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRmDYQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOXSwf/WKmYPe09yHfxfVSFsSz83QpB3e+f
KJx6FdyMMt26ZQJpcqorobrDV23R8FyxngXPkwoxqobAEtXB/AH0/S/u8RUZ46Qt
IrF8FXr4ZdyLW7CW6nmIejmlul0iRmFD7D98E6dZ3QXfype3Ifra7gG74spZ1B44
ZNvaomJKUK8Ga8rbChs9KtgrxlOC5q8IfTWF5ZExmZszPC9NRnZmU5Oncnuwek9T
Ic6zDPoAeF3jDtovZhxg1HAB9e/ENZX/V9NjO92yZa8u/TITQ88l4tJctf7uiLxO
2oGY12ln8i//pbjyUe4iM+bNh5+reAChEI8iv7WxEsj9s2HBUJ68f3tpbQ==
=Zg00
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* kvm: enable dirty ring for arm64
* target/i386: new features
* target/i386: AVX fixes
* configure: create a python venv unconditionally
* meson: bump to 0.63.0 and move tests from configure
* meson: Pass -j option to sphinx
* drop support for Python 3.6
* fix check-python-tox
* fix "make clean" in the source directory
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRmDYQUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOXSwf/WKmYPe09yHfxfVSFsSz83QpB3e+f
# KJx6FdyMMt26ZQJpcqorobrDV23R8FyxngXPkwoxqobAEtXB/AH0/S/u8RUZ46Qt
# IrF8FXr4ZdyLW7CW6nmIejmlul0iRmFD7D98E6dZ3QXfype3Ifra7gG74spZ1B44
# ZNvaomJKUK8Ga8rbChs9KtgrxlOC5q8IfTWF5ZExmZszPC9NRnZmU5Oncnuwek9T
# Ic6zDPoAeF3jDtovZhxg1HAB9e/ENZX/V9NjO92yZa8u/TITQ88l4tJctf7uiLxO
# 2oGY12ln8i//pbjyUe4iM+bNh5+reAChEI8iv7WxEsj9s2HBUJ68f3tpbQ==
# =Zg00
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 May 2023 04:35:32 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (68 commits)
docs/devel: update build system docs
configure: remove unnecessary check
configure: reorder option parsing code
configure: remove unnecessary mkdir
configure: do not rerun the tests with -Werror
configure: remove compiler sanity check
build: move --disable-debug-info to meson
build: move compiler version check to meson
build: move remaining compiler flag tests to meson
build: move warning flag selection to meson
build: move stack protector flag selection to meson
build: move coroutine backend selection to meson
build: move SafeStack tests to meson
build: move sanitizer tests to meson
meson: prepare move of QEMU_CFLAGS to meson
configure, meson: move --enable-modules to Meson
configure: remove pkg-config functions
build: move glib detection and workarounds to meson
meson: drop unnecessary declare_dependency()
meson: add more version numbers to the summary
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The IMPDEF sysreg L2CTLR_EL1 found on the Cortex-A35, A53, A57, A72
and which we (arguably dubiously) also provide in '-cpu max' has a
2 bit field for the number of processors in the cluster. On real
hardware this must be sufficient because it can only be configured
with up to 4 CPUs in the cluster. However on QEMU if the board code
does not explicitly configure the code into clusters with the right
CPU count we default to "give the value assuming that all CPUs in
the system are in a single cluster", which might be too big to fit
in the field.
Instead of just overflowing this 2-bit field, saturate to 3 (meaning
"4 CPUs", so at least we don't overwrite other fields in the register.
It's unlikely that any guest code really cares about the value in
this field; at least, if it does it probably also wants the system
to be more closely matching real hardware, i.e. not to have more
than 4 CPUs.
This issue has been present since the L2CTLR was first added in
commit 377a44ec8f back in 2014. It was only noticed because
Coverity complains (CID 1509227) that the shift might overflow 32 bits
and inadvertently sign extend into the top half of the 64 bit value.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512170223.3801643-2-peter.maydell@linaro.org
Convert the exception-return insns ERET, ERETA and ERETB to
decodetree. These were the last insns left in the legacy
decoder function disas_uncond_reg_b(), which allows us to
remove it.
The old decoder explicitly decoded the DRPS instruction,
only in order to call unallocated_encoding() on it, exactly
as would have happened if it hadn't decoded it. This is
because this insn always UNDEFs unless the CPU is in
halting-debug state, which we don't emulate. So we list
the pattern in a comment in a64.decode, but don't actively
decode it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-21-peter.maydell@linaro.org
Convert the last four BR-with-pointer-auth insns to decodetree.
The remaining cases in the outer switch in disas_uncond_b_reg()
all return early rather than leaving the case statement, so we
can delete the now-unused code at the end of that function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-20-peter.maydell@linaro.org
Convert the single-register pointer-authentication variants of BR,
BLR, RET to decodetree. (BRAA/BLRAA are in a different branch of
the legacy decoder and will be dealt with in the next commit.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-19-peter.maydell@linaro.org
Convert the simple (non-pointer-auth) BR, BLR and RET insns
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-18-peter.maydell@linaro.org
Convert the immediate conditional branch insn B.cond to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-17-peter.maydell@linaro.org
Convert the test-and-branch-immediate insns TBZ and TBNZ
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-16-peter.maydell@linaro.org
Convert the compare-and-branch-immediate insns CBZ and CBNZ
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-15-peter.maydell@linaro.org
Convert the unconditional branch immediate insns B and BL to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-14-peter.maydell@linaro.org
Convert the EXTR instruction to decodetree (this is the
only one in the 'Extract" class). This is the last of
the dp-immediate insns in the legacy decoder, so we
can now remove disas_data_proc_imm().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230512144106.3608981-13-peter.maydell@linaro.org
Convert the MON, MOVZ, MOVK instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20230512144106.3608981-11-peter.maydell@linaro.org
[PMM: Rebased]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
