Commit Graph

556 Commits

Author SHA1 Message Date
Leonid Bloch e3a7b4556e qcow2: Fix cache-clean-interval documentation
Fixing cache-clean-interval documentation following the recent change to
a default of 600 seconds on supported plarforms (only Linux currently).

Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-01 19:13:55 +02:00
Leonid Bloch e957b50b8d qcow2: Set the default cache-clean-interval to 10 minutes
The default cache-clean-interval is set to 10 minutes, in order to lower
the overhead of the qcow2 caches (before the default was 0, i.e.
disabled).

* For non-Linux platforms the default is kept at 0, because
  cache-clean-interval is not supported there yet.

Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-01 12:51:12 +02:00
Leonid Bloch 80668d0fb7 qcow2: Increase the default upper limit on the L2 cache size
The upper limit on the L2 cache size is increased from 1 MB to 32 MB
on Linux platforms, and to 8 MB on other platforms (this difference is
caused by the ability to set intervals for cache cleaning on Linux
platforms only).

This is done in order to allow default full coverage with the L2 cache
for images of up to 256 GB in size (was 8 GB). Note, that only the
needed amount to cover the full image is allocated. The value which is
changed here is just the upper limit on the L2 cache size, beyond which
it will not grow, even if the size of the image will require it to.

Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-01 12:51:12 +02:00
Leonid Bloch b749562d98 qcow2: Assign the L2 cache relatively to the image size
Sufficient L2 cache can noticeably improve the performance when using
large images with frequent I/O.

Previously, unless 'cache-size' was specified and was large enough, the
L2 cache was set to a certain size without taking the virtual image size
into account.

Now, the L2 cache assignment is aware of the virtual size of the image,
and will cover the entire image, unless the cache size needed for that is
larger than a certain maximum. This maximum is set to 1 MB by default
(enough to cover an 8 GB image with the default cluster size) but can
be increased or decreased using the 'l2-cache-size' option. This option
was previously documented as the *maximum* L2 cache size, and this patch
makes it behave as such, instead of as a constant size. Also, the
existing option 'cache-size' can limit the sum of both L2 and refcount
caches, as previously.

Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-01 12:51:12 +02:00
Leonid Bloch 40fb215d48 qcow2: Options' documentation fixes
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-10-01 12:51:12 +02:00
Thomas Huth d18572dd9a net: Remove the deprecated -tftp, -bootp, -redir and -smb options
These options likely do not work as expected as soon as the user
tries to use more than one network interface at once. The parameters
have been marked as deprecated since QEMU v2.6, so users had plenty
of time to move their scripts to the new syntax. Time to remove the
old parameters now.

Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-08-31 09:53:03 +02:00
Thomas Huth fdaf2d5885 Remove the deprecated options -startdate, -localtime and -rtc-td-hack
Deprecated since two releases, nobody complained, thus it's time to
remove them now.

Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-08-31 09:52:55 +02:00
Thomas Huth 2feac451d2 Remove the deprecated -nodefconfig option
It's the same as -no-user-config and marked as deprecated since three
releases already. Time to remove it now.

Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-08-31 09:52:46 +02:00
Thomas Huth 1d9cb42c56 Remove the deprecated -balloon option
The "-balloon" option has been replaced by "-device virtio-balloon".
It's been marked as deprecated since two releases, and nobody
complained, so let's remove it now.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-08-31 09:52:13 +02:00
Peter Maydell 025573be71 ui: misc fixes which piled up during 3.0 release freeze
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJbg7vzAAoJEEy22O7T6HE4ipQQAJ9KnrLLr23moSW+RwMjNbma
 m0ZK1ySWwRTFLcfvW2mREKW7smeRWRXILrD0KH8OYNf+AIqXzbVo160lV1LnWYLO
 9VtwGUsUpy36hYlBbc1ZwW9d0vZ8suF2j1k5uESUS8ZJg9QczyPGYWaa4Be9pC7y
 tIud4iPcukSnM42bF9EZCmUdi5rxhqBN6rLZtE/Bg+B7JJAxIh3fR4c2Bi27o1d4
 RX4gyoyl7WQmN77ejmZBelEQsUYWLFDrK1RL5Ir8Ib0O0mzSm7fnJQ5WgYv8R8Na
 wTS1t+ue7wa8GGQonUwRl5ttVf0BppvOu5NZLFaQyCVODTgjVO/IjbKpkijBgHsB
 DqOh4bYK8CgnQtre/m10nGrbVzNsX9FmcCLAAqwmWtCZ1sozjT3rOxVgJD8hn7ro
 J0LEYZuQ0TaCzS2Kaf6+BdXNMWJQShPPyi4UJI490RswzTeg4z2weNIPdlFoyJZd
 Wr7GDPkpHkpFnx65XbBvzOpMNIdJESW9WZLkwy95HfgSkty+3DpmvoKhLyzWOCsF
 AbVJOkjbNgKYJpfu8HmZsV/WB9Ll8aKkMieisY0Y2PHyNv853YkJBuRhLRopx7Ke
 NsGa2jZofuWJxpO0v9FqeVJB1B4iHJ5w2obWixcvGTUJD1Bg30WsQudGVO4tO4SD
 nvt+6vsxYFHr9QaOXIyV
 =WC8K
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/ui-20180827-v4-pull-request' into staging

ui: misc fixes which piled up during 3.0 release freeze

# gpg: Signature made Mon 27 Aug 2018 09:53:07 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20180827-v4-pull-request:
  util: promote qemu_egl_rendernode_open() to libqemuutil
  dmabuf: add y0_top, pass it to spice
  ui/vnc: Remove useless parenthesis around DIV_ROUND_UP macro
  ui/sdl2: Fix broken -full-screen CLI option
  spice-display: fix qemu_spice_cursor_refresh_bh locking
  spice-display: access ptr_x/ptr_y under Mutex
  vnc: remove support for deprecated tls, x509, x509verify options
  doc: switch to modern syntax for VNC TLS setup
  sdl2: redraw correctly when scanout_mode enabled.
  ui: use enum to string helpers
  vnc: fix memleak of the "vnc-worker-output" name
  ui/sdl2: Remove the obsolete SDL_INIT_NOPARACHUTE flag

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-27 12:30:51 +01:00
Daniel P. Berrangé ec86faa934 vnc: remove support for deprecated tls, x509, x509verify options
The 'tls-creds' option accepts the name of a TLS credentials
object. This replaced the usage of 'tls', 'x509' and 'x509verify'
options in 2.5.0. These deprecated options were grandfathered in
when the deprecation policy was introduded in 2.10.0, so can now
finally be removed.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20180725092751.21767-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-08-24 08:40:11 +02:00
Emilio G. Cota 12df189de1 vl: add -enable-sync-profile
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-23 18:46:25 +02:00
Peter Maydell 55f4e79d79 pc: fixes
This includes nvdimm persistence fixes queued before the release.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJbepoTAAoJECgfDbjSjVRpLioH/3BPps8FLh4x2gZSq3B+u72O
 RYUA3I3TilEGyc9yf8o7e1Hf+pQAJBEmulcnKxXFVWZIJ1GVLPt4NZCMQGiPDnJL
 +RCT/Q64PUy09hRjddAasikrvXa4YOsRgBgJJToO7v9PSQSaU3fC7O3hNea7KcF/
 C4SSqkUgxyDhCCYHHblpKxFz/wtwy4ZaCGSdozIdmKNPJ6/ye8wOQ1Mq9e1Mwp18
 S6ilJub5IwB6aM2KVMmX4AFomF4u2cn153ts8fI+Dyo4/NE6P4+viDlz3BOBKdzm
 kmd49h6/n4Lenoo4oI1yNHSuIJJTVfvnoLu6rG7mPbQKgxNd1uN4KuUIygU5PCY=
 =Xcaj
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc: fixes

This includes nvdimm persistence fixes queued before the release.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 20 Aug 2018 11:38:11 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  migration/ram: ensure write persistence on loading all data to PMEM.
  migration/ram: Add check and info message to nvdimm post copy.
  mem/nvdimm: ensure write persistence to PMEM in label emulation
  hostmem-file: add the 'pmem' option
  configure: add libpmem support
  memory, exec: switch file ram allocation functions to 'flags' parameters
  memory, exec: Expose all memory block related flags.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-08-21 10:23:53 +01:00
Cornelia Huck 36699ab480 s390x: remove 's390-squash-mcss' option
This option has been deprecated for two releases; remove it.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-08-20 14:18:49 +02:00
Kevin Wolf 572023f7b2 block: Remove deprecated -drive option serial
This reinstates commit b008326744,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.

The -drive option serial was deprecated in QEMU 2.10. It's time to
remove it.

Tests need to be updated to set the serial number with -global instead
of using the -drive option.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-08-15 12:50:39 +02:00
Kevin Wolf 7f8fc97155 block: Remove deprecated -drive option addr
This reinstates commit eae3bd1eb7,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.

The -drive option addr was deprecated in QEMU 2.10. It's time to remove
it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-08-15 12:50:39 +02:00
Kevin Wolf b24ec3c462 block: Remove deprecated -drive geometry options
This reinstates commit a7aff6dd10,
which was temporarily reverted for the 3.0 release so that libvirt gets
some extra time to update their command lines.

The -drive options cyls, heads, secs and trans were deprecated in
QEMU 2.10. It's time to remove them.

hd-geo-test tested both the old version with geometry options in -drive
and the new one with -device. Therefore the code using -drive doesn't
have to be replaced there, we just need to remove the -drive test cases.
This in turn allows some simplification of the code.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-08-15 12:50:39 +02:00
Junyan He a4de8552b2 hostmem-file: add the 'pmem' option
When QEMU emulates vNVDIMM labels and migrates vNVDIMM devices, it
needs to know whether the backend storage is a real persistent memory,
in order to decide whether special operations should be performed to
ensure the data persistence.

This boolean option 'pmem' allows users to specify whether the backend
storage of memory-backend-file is a real persistent memory. If
'pmem=on', QEMU will set the flag RAM_PMEM in the RAM block of the
corresponding memory region. If 'pmem' is set while lack of libpmem
support, a error is generated.

Signed-off-by: Junyan He <junyan.he@intel.com>
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-10 13:29:39 +03:00
Peter Maydell 59b5552f02 Bug fixes.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJbTgXfAAoJEL/70l94x66DTbYH/3NutBAkNZKX7EImj/d0I1O8
 nERMVH1R70KBcugdsjhaBfTRoATDXdrBng4MBqloIK9dEMT3g6D4TFZJLU+WAjOc
 8sItx0BrUR7Sl8SnAvWNFoqVtvVancFiLnu11DsFGM0l8mJHRlZSkQZ0Fd0FL2W/
 OPnW7t6F7B2bc1VlPfSs093FVCoD3S+lJmbj64dwNrn8+fOX918V6gSaYQe92aIY
 pSbJjkRDx2iULmzMY8QH4OQiHgnd/Pijj+D628DMrUc0iW1Rsw5V2Yq7SMY6zoa8
 MoI/YDwX6eRMU2mq74BrKlULZrpmQn+6ZCdZTvXzLwc2zpKD4puO4FuMBOA7yx4=
 =GcxI
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

Bug fixes.

# gpg: Signature made Tue 17 Jul 2018 16:06:07 BST
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  Document command line options with single dash
  opts: remove redundant check for NULL parameter
  i386: only parse the initrd_filename once for multiboot modules
  i386: fix regression parsing multiboot initrd modules
  virtio-scsi: fix hotplug ->reset() vs event race
  qdev: add HotplugHandler->post_plug() callback
  hw/char/serial: retry write if EAGAIN
  PC Chipset: Improve serial divisor calculation
  vhost-user-test: added proper TestServer *dest initialization in test_migrate()
  hyperv: ensure VP index equal to QEMU cpu_index
  hyperv: rename vcpu_id to vp_index
  accel: Fix typo and grammar in comment
  dump: add kernel_gs_base to QEMU CPU state

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-17 17:06:32 +01:00
BALATON Zoltan dfaa7d50b0 Document command line options with single dash
QEMU options have a single dash (but also work as double dash for
convenience and compatibility). Most options are listed with single
dash in command line help but some were listed with two dashes.
Normalize these to have the same format as the others.

Left --preconfig as that is mentioned as double dash everywhere so I
assume that is the preferred form for that.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20180716193312.A5BA17456B9@zero.eik.bme.hu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-17 16:24:50 +02:00
Markus Armbruster 361ac948a5 cli qmp: Mark --preconfig, exit-preconfig experimental
Committing to the current --preconfig / exit-preconfig interface
before it has seen any use is premature.  Mark both as experimental,
the former in documentation, the latter by renaming it to
x-exit-preconfig.

See the previous commit for more detailed rationale.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180705091402.26244-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
[Straightforward conflict with commit 514337c142 resolved]
2018-07-16 15:38:19 +02:00
Cornelia Huck 6703db131f Revert "block: Remove deprecated -drive geometry options"
This reverts commit a7aff6dd10.

Hold off removing this for one more QEMU release (current libvirt
release still uses it.)

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-10 14:36:12 +02:00
Cornelia Huck 75f4cd2979 Revert "block: Remove deprecated -drive option addr"
This reverts commit eae3bd1eb7.

Reverted to avoid conflicts for geometry options revert.

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-10 14:36:12 +02:00
Cornelia Huck 44e8b4689c Revert "block: Remove deprecated -drive option serial"
This reverts commit b008326744.

Hold off removing this for one more QEMU release (current libvirt
release still uses it.)

Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-10 14:36:11 +02:00
Richard W.M. Jones e1a6dc91dd crypto: Implement TLS Pre-Shared Keys (PSK).
Pre-Shared Keys (PSK) is a simpler mechanism for enabling TLS
connections than using certificates.  It requires only a simple secret
key:

  $ mkdir -m 0700 /tmp/keys
  $ psktool -u rjones -p /tmp/keys/keys.psk
  $ cat /tmp/keys/keys.psk
  rjones:d543770c15ad93d76443fb56f501a31969235f47e999720ae8d2336f6a13fcbc

The key can be secretly shared between clients and servers.  Clients
must specify the directory containing the "keys.psk" file and a
username (defaults to "qemu").  Servers must specify only the
directory.

Example NBD client:

  $ qemu-img info \
    --object tls-creds-psk,id=tls0,dir=/tmp/keys,username=rjones,endpoint=client \
    --image-opts \
    file.driver=nbd,file.host=localhost,file.port=10809,file.tls-creds=tls0,file.export=/

Example NBD server using qemu-nbd:

  $ qemu-nbd -t -x / \
    --object tls-creds-psk,id=tls0,endpoint=server,dir=/tmp/keys \
    --tls-creds tls0 \
    image.qcow2

Example NBD server using nbdkit:

  $ nbdkit -n -e / -fv \
    --tls=on --tls-psk=/tmp/keys/keys.psk \
    file file=disk.img

Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-07-03 13:04:38 +01:00
Michael S. Tsirkin 6f131f13e6 kvm: support -overcommit cpu-pm=on|off
With this flag, kvm allows guest to control host CPU power state.  This
increases latency for other processes using same host CPU in an
unpredictable way, but if decreases idle entry/exit times for the
running VCPU, so to use it QEMU needs a hint about whether host CPU is
overcommitted, hence the flag name.

Follow-up patches will expose this capability to guest
(using mwait leaf).

Based on a patch by Wanpeng Li <kernellwp@gmail.com> .

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20180622192148.178309-2-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28 19:05:37 +02:00
Thomas Huth c44df2ff9b Deprecate the -enable-hax option
We currently have got three ways of turning on the HAX accelerator:
"-machine accel=hax", "-accel hax" and "-enable-hax". That's really
confusing and overloaded. Since "-accel" is our preferred way to enable
an accelerator nowadays, and "-accel hax" is even less to type than
"-enable-hax", let's deprecate the "-enable-hax" option now.

Note: While "-enable-kvm" is available since a long time and can hardly be
removed since it is used in a lot of upper layer tools and scripts, the
"-enable-hax" option is still rather new and not very widespread yet, so
I think that it should be OK if we remove this in a couple of releases again
(we'll see whether someone complains after seeing the deprecation message -
then we could still reconsider to keep it if there a well-founded reasons).

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1529950933-28347-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28 19:05:34 +02:00
Eduardo Habkost 0b3c5c81bf qemu-options: Add missing newline to -accel help text
The newline was removed by commit c97d6d2c, and broke -help output:

Before this patch:

  $ qemu-system-x86_64 -help | grep smp
                  thread=single|multi (enable multi-threaded TCG)-smp [...]

After this patch:

  $ qemu-system-x86_64 -help  | grep smp
  -smp [cpus=]n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]

Fixes: c97d6d2cdf
Cc: Sergio Andres Gomez Del Real <sergio.g.delreal@gmail.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180611195607.3015-1-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28 19:05:32 +02:00
Kevin Wolf b008326744 block: Remove deprecated -drive option serial
The -drive option serial was deprecated in QEMU 2.10. It's time to
remove it.

Tests need to be updated to set the serial number with -global instead
of using the -drive option.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-06-15 14:49:44 +02:00
Kevin Wolf eae3bd1eb7 block: Remove deprecated -drive option addr
The -drive option addr was deprecated in QEMU 2.10. It's time to remove
it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
2018-06-15 14:49:44 +02:00
Kevin Wolf a7aff6dd10 block: Remove deprecated -drive geometry options
The -drive options cyls, heads, secs and trans were deprecated in
QEMU 2.10. It's time to remove them.

hd-geo-test tested both the old version with geometry options in -drive
and the new one with -device. Therefore the code using -drive doesn't
have to be replaced there, we just need to remove the -drive test cases.
This in turn allows some simplification of the code.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-06-15 14:49:44 +02:00
Benjamin Drung f18d137542 slirp: Add domainname option to slirp's DHCP server
This patch will allow the user to include the domainname option in
replies from the built-in DHCP server.

Signed-off-by: Benjamin Drung <benjamin.drung@profitbricks.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2018-05-31 21:19:08 +02:00
Igor Mammedov 047f7038f5 cli: add --preconfig option
This option allows pausing QEMU in the new RUN_STATE_PRECONFIG state,
allowing the configuration of QEMU from QMP before the machine jumps
into board initialization code of machine_run_board_init()

The intent is to allow management to query machine state and additionally
configure it using previous query results within one QEMU instance
(i.e. eliminate the need to start QEMU twice, 1st to query board specific
parameters and 2nd for actual VM start using query results for
additional parameters).

The new option complements -S option and could be used with or without
it. The difference is that -S pauses QEMU when the machine is completely
initialized with all devices wired up and ready to execute guest code
(QEMU needs only to unpause VCPUs to let guest execute its code),
while the "preconfig" option pauses QEMU early before board specific init
callback (machine_run_board_init) is executed and allows the configuration
of machine parameters which will be used by board init code.

When early introspection/configuration is done, command 'exit-preconfig'
should be used to exit RUN_STATE_PRECONFIG and transition to the next
requested state (i.e. if -S is used then QEMU will pause the second
time when board/device initialization is completed or start guest
execution if -S isn't provided on CLI)

PS:
Initially 'preconfig' is planned to be used for configuring numa
topology depending on board specified possible cpus layout.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1526059483-42847-1-git-send-email-imammedo@redhat.com>
[ehabkost: Changed "since 2.13" to "since 3.0"]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-05-30 13:19:14 -03:00
Peter Maydell 7a9180b77e -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
 
 iQEcBAABAgAGBQJa+UAZAAoJEO8Ells5jWIRTJIIAIcpNROupxHEfcAQKU7lIqys
 qx/FxKp+lknzzQMwUfmZwT3PuBD+tWuE7ugXgzjVulvE11F+Z3QBPTDBtOObaMa1
 qpgIF3zzrNxtuWMc/72Q8/wEE1wtBUo+WTAGw9Xp1dVomYOOsg1wa7dsKdZhRfz7
 nIwDW2ftw3/mx+uTW2/a163v+IDDL9L+HOLibQHWUxOMM39ASchiqAXLF4mfhpwH
 xr0OPd7wtcmrDsD/CLbdkGCJ/+vsXnY8pzNmy1RjJuDpWpqlgYpJJPtLBfXBo9VA
 91sz5+KryzjpXXzKcQuhiU020O1dIKIe3PWqK6z0x0UjtZ1Yox5adZ3eFomHHwU=
 =bIws
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging

# gpg: Signature made Mon 14 May 2018 08:51:53 BST
# gpg:                using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F  3562 EF04 965B 398D 6211

* remotes/jasowang/tags/net-pull-request:
  net: Get rid of 'vlan' terminology and use 'hub' instead in the doc files
  net: Get rid of 'vlan' terminology and use 'hub' instead in the source files
  net: Remove the deprecated "vlan" parameter
  net: Fix memory leak in net_param_nic()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-05-14 14:15:27 +01:00
Thomas Huth af1a5c3eb4 net: Remove the deprecated "vlan" parameter
It's been marked as deprecated since QEMU v2.9.0, so that should have
been enough time for everybody to either just drop unnecessary "vlan=0"
parameters, to switch to the modern -device + -netdev syntax for connecting
guest NICs with host network backends, or to switch to the "hubport" netdev
in case hubs are really wanted instead.

Buglink: https://bugs.launchpad.net/qemu/+bug/658904
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-05-14 15:47:14 +08:00
Thomas Huth d8ab6cb798 qemu-options: Remove deprecated -no-kvm-irqchip
We've never documented this option in our qemu-doc, so apart from the users
that already used the old qemu-kvm fork before, most users should not be
aware of this option at all. It's been marked as deprecated in the source
code for a long time already, and officially marked as deprecated in the
documentation since QEMU v2.10, so it should be fine to remove this now.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525453270-23074-5-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-09 00:13:40 +02:00
Thomas Huth ec910caba9 qemu-options: Remove deprecated -no-kvm-pit-reinjection
Deprecated since the beginning when it was added for compatibility with
the ancient qemu-kvm fork of QEMU, and it even printed out the deprecation
warning since right from the start (i.e. QEMU v1.3.0), so it's really time
to remove this now.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525453270-23074-4-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-09 00:13:40 +02:00
Thomas Huth 281b95231d qemu-options: Remove remainders of the -tdf option
The -tdf options has been removed with d07aa197c5,
but apparently I forgot to remove the corresponding two lines from
qemu-options.hx, so this option is still "available" and just silently
ignored. Kill it now for good.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525453270-23074-2-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-09 00:13:39 +02:00
Thomas Huth 454012997e qemu-options: Mark -virtioconsole as deprecated
The qemu-doc already states that this option is only maintained for
backward compatibility and "-device virtconsole" should be used
instead. So let's take the next step and mark this option officially
as deprecated.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1525446790-16139-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-09 00:13:39 +02:00
Peter Maydell 10f4718b51 vnc: fix use-after-free.
sdl2: gles support.
 vfio-display: add reset support.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJa4vNJAAoJEEy22O7T6HE4kP0P/iRErkXMYSuX6oKIaXCCSPLj
 KfK6Evw5YZ3IuntFg466D/1MthH8bZvAmSYD4uxGM8senIxqSzU4ta6026Orm6ds
 zrECnt4uiai261gdcwpQzt8wAo3NXTY6YSabO+pUaN7IDU5vO/nA8D6PNWPDwn1I
 NSz3LKCdwLHMlNVASF2GOjhhflB9vr1iQcGSB7YJtyeFN/R95j4qXKXcZ5XERTeR
 ue8eut39xOBikk5KZQj9gh+LjSmTMcENUJIOngb15FupKNhz55K+mLQ4FyC74kSQ
 csJrleD9kwbaDaw8tFPQ3LN9ZxelHhgByzEh7hPGgvXIk5tAOcqx9JPsHXgI/00w
 h6FiTgT8WpZ/xgriCtPAzKiEURvnNXQY25Zu5M+Wbj0CAMU5kDwoHDoRDqW7p4q2
 +YtmJpSmRhVWbAetslxJ+Qv5rP+XSCBdKALkyADOffkq/nEWgc3v/290N8/4kpP+
 +k7A9ClbhzJEt6LfKP5h09sSC0fbIb6TtmE/XqS0RyIKFoOctSBGU5n093lrMpL1
 Eo7WpUcC4qS+lTF+xASUJibbIiyVc+oPtdcF1ucYP0yrcEJgs5a2AEZrwLLHBZAB
 JtV29Z5eHVH0BdgKCN5DjN8NgiEPySDRk2WOje3sOiSvNv28YvzA+LR2pOppunqi
 Ho5Aays4s3sgmVdF4TpQ
 =gpOC
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/ui-20180427-pull-request' into staging

vnc: fix use-after-free.
sdl2: gles support.
vfio-display: add reset support.

# gpg: Signature made Fri 27 Apr 2018 10:54:17 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/ui-20180427-pull-request:
  ui: introduce vfio_display_reset
  console: introduce dpy_gfx_update_full
  sdl: Allow OpenGL ES context creation
  sdl: Move DisplayOptions global to sdl2_console
  qapi: Parameter gl of DisplayType now accept an enum
  vnc: fix use-after-free

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-04-27 11:39:31 +01:00
Elie Tournier 4867e47cb6 sdl: Allow OpenGL ES context creation
Signed-off-by: Elie Tournier <elie.tournier@collabora.com>
Message-id: 20180413135842.21325-4-tournier.elie@gmail.com

[ kraxel: fix indent ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-04-27 11:23:01 +02:00
Ian Jackson 2c42f1e801 os-posix: Provide new -runas <uid>:<gid> facility
This allows the caller to specify a uid and gid to use, even if there
is no corresponding password entry.  This will be useful in certain
Xen configurations.

We don't support just -runas <uid> because: (i) deprivileging without
calling setgroups would be ineffective (ii) given only a uid we don't
know what gid we ought to use (since uids may eppear in multiple
passwd file entries with different gids).

Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Daniel P. Berrange <berrange@redhat.com>
CC: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2018-04-26 16:29:51 +01:00
Christophe Fergeau 00e5e9df29 docs: Document -object tls-creds-x509 priority=xxx
This was added in 13f1243, but is missing from qemu-options.hx

Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-06 11:28:30 +01:00
Thomas Huth abbbb0350d qemu-doc: Rework the network options chapter to make "-net" less prominent
"-net" is clearly a legacy option. Yet we still use it in almost all
examples in the qemu documentation, and many other spots in the network
chapter. We should make it less prominent that users are not lured into
using it so often anymore. So instead of starting the network chapter with
"-net nic" and documenting "-net <backend>" below "-netdev <backend>"
everywhere, all the "-net" related documentation is now moved to the end
of the chapter. The new "-nic" option is moved to the beginning of the
chapter instead, with a new example that should demonstrate how "-nic"
can be used to shortcut "-device" with "-netdev". The examples in this
chapter are changed to use the "-device" and "-netdev" options or
"-nic" instead of "-net nic -net <backend>".

While we're at it, also remove a legacy remark about very old Linux
distributions. Also remove the "[...]" from the examples in this chapter
since we are not using this ellipsis in any other examples in our docu-
mentation.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-30 11:44:11 +08:00
Max Reitz 4f7be2806e block: Deprecate "backing": ""
We have a clear replacement, so let's deprecate it.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-8-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-19 14:58:36 -05:00
Brijesh Singh a9b4942f48 target/i386: add Secure Encrypted Virtualization (SEV) object
Add a new memory encryption object 'sev-guest'. The object will be used
to create encrypted VMs on AMD EPYC CPU. The object provides the properties
to pass guest owner's public Diffie-hellman key, guest policy and session
information required to create the memory encryption context within the
SEV firmware.

e.g to launch SEV guest
 # $QEMU \
    -object sev-guest,id=sev0 \
    -machine ....,memory-encryption=sev0

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-13 12:04:03 +01:00
Brijesh Singh db5881949f machine: add memory-encryption option
When CPU supports memory encryption feature, the property can be used to
specify the encryption object to use when launching an encrypted guest.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-13 12:04:03 +01:00
Thomas Huth 4060e671c3 balloon: Fix documentation of the --balloon parameter and deprecate it
There are two issues with the documentation of the --balloon parameter:
First, "--balloon none" is simply doing nothing. Even if a machine had a
balloon device by default, this option is not disabling anything, it is
simply ignored. Thus let's simply drop this option from the documentation
to avoid to confuse the users (but keep the code in vl.c for backward
compatibility).
Second, the documentation claims that "--balloon virtio" is the default
mode, but this is not true anymore since commit 382f074371.
Since that commit, the option also has no real use case anymore, since
you can simply use "--device virtio-balloon" nowadays instead. Thus to
simplify our complex parameter zoo a little bit, let's deprecate the
the parameter now and tell the user to use "--device virtio-balloon"
instead.

Fixes: 382f074371
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1519796303-13257-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-06 14:01:29 +01:00
Thomas Huth 78cd6f7bf6 net: Add a new convenience option "--nic" to configure default/on-board NICs
The legacy "-net" option can be quite confusing for the users since most
people do not expect to get a "vlan" hub between their emulated guest
hardware and the host backend. But so far, we are also not able to get
rid of "-net" completely, since it is the only way to configure on-board
NICs that can not be instantiated via "-device" yet. It's also a little
bit shorter to type "-net nic -net tap" instead of "-device xyz,netdev=n1
-netdev tap,id=n1".

So what we need is a new convenience option that is shorter to type than
the full -device + -netdev stuff, and which can be used to configure the
on-board NICs that can not be handled via -device yet. Thus this patch now
provides such a new option "--nic": It adds an entry in the nd_table to
configure a on-board / default NIC, creates a host backend and connects
the two directly, without a confusing "vlan" hub inbetween.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05 10:30:16 +08:00
Thomas Huth 857d20873d net: Remove the deprecated way of dumping network packets
"-net dump" has been marked as deprecated since QEMU v2.10, since it
only works with the deprecated 'vlan' parameter (or hubs). Network
dumping should be done with "-object filter-dump" nowadays instead.
Since nobody complained so far about the deprecation message, let's
finally get rid of "-net dump" now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-03-05 10:30:15 +08:00