Finish the convertion started with commit de6cd7599b
("meson: Replace softmmu_ss -> system_ss"). If the
$target_type is 'system', then use the target_system_arch[]
source set :)
Mechanical change doing:
$ sed -i -e s/target_softmmu_arch/target_system_arch/g \
$(git grep -l target_softmmu_arch)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-13-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This function is now empty, so remove it. In the case of
m68k and tricore, this empties the class instance initfn,
so remove those as well.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow the name 'cpu_env' to be used for something else.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Retain the separate structure to emphasize its importance.
Enforce CPUArchState always follows CPUState without padding.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The omission of alignment has technically been wrong since
269bd5d8f6, where QEMU_ALIGNED was added to CPUTLBDescFast.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Wire up the hppa diag instruction to support Block-TLBs
when called with the 0x100 value.
The diag_btlb() helper function does all necessary steps
to emulate the PDC BTLB firmware function, which includes
providing BTLB info, adding a new BTLB, deleting a BTLB
and removing all BTLBs.
Signed-off-by: Helge Deller <deller@gmx.de>
Extract the immediate value given by the diagnose CPU instruction.
This is needed to distinguish the various diagnose calls.
Signed-off-by: Helge Deller <deller@gmx.de>
Change the TLB code to store the Block-TLBs at the beginning
of the TLB table. New 4k TLB entries which are added later
shall not overwrite any of the BTLB entries.
Make sure that when the TLB is cleared by the OS via the ptlbe
instruction, the Block-TLBs will not be dropped.
Signed-off-by: Helge Deller <deller@gmx.de>
All these files only access the translator_ld/st API declared
in "exec/translator.h". The CPU ld/st API from declared in
"exec/cpu_ldst.h" is not used, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230828221314.18435-5-philmd@linaro.org>
The MMU indices 9-15 will use shorter assembler instructions
when run on a x86-64 host. So, switch over to those to get
smaller code and maybe minimally faster emulation.
Signed-off-by: Helge Deller <deller@gmx.de>
Convert hppa_get_physical_address() to use the privilege helper macro.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Avoid using hardcoded values when calling the tlb_flush*() functions.
Instead, define and use HPPA_MMU_FLUSH_MASK (keeping the current
behavior, which doesn't flush the physical address MMU).
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add two macros which convert privilege level to/from MMU index:
- PRIV_TO_MMU_IDX(priv)
returns the MMU index for the given privilege level
- MMU_IDX_TO_PRIV(mmu_idx)
returns the corresponding privilege level for this MMU index
The introduction of those macros make the code easier to read and
will help to improve performance in follow-up patch.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The hppa CPU has 4 privilege levels (0-3).
Mention the missing PL1 and PL2 levels, although the Linux kernel
uses only 0 (KERNEL) and 3 (USER). Not sure about HP-UX.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
On hppa the Instruction Address Offset Queue (IAOQ) registers specifies
the next to-be-executed instructions addresses. Each generated TB writes those
registers at least once, so those registers are used heavily in generated
code.
Looking at the generated assembly, for a x86-64 host this code
to write the address $0x7ffe826f into iaoq_f is generated:
0x7f73e8000184: c7 85 d4 01 00 00 6f 82 movl $0x7ffe826f, 0x1d4(%rbp)
0x7f73e800018c: fe 7f
0x7f73e800018e: c7 85 d8 01 00 00 73 82 movl $0x7ffe8273, 0x1d8(%rbp)
0x7f73e8000196: fe 7f
With the trivial change, by moving the variables iaoq_f and iaoq_b to
the top of struct CPUArchState, the offset to %rbp is reduced (from
0x1d4 to 0), which allows the x86-64 tcg to generate 3 bytes less of
generated code per move instruction:
0x7fc1e800018c: c7 45 00 6f 82 fe 7f movl $0x7ffe826f, (%rbp)
0x7fc1e8000193: c7 45 04 73 82 fe 7f movl $0x7ffe8273, 4(%rbp)
Overall this is a reduction of generated code (not a reduction of
number of instructions).
A test run with checks the generated code size by running "/bin/ls"
with qemu-user shows that the code size shrinks from 1616767 to 1569273
bytes, which is ~97% of the former size.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: qemu-stable@nongnu.org
Replace the 0/-1 result with true/false.
Invert the sense of the test of all callers.
Document the function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230707204054.8792-25-richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-4-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
int_helper.c only contains system emulation code:
remove the #ifdef'ry and move the file to the meson
softmmu source set.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230602223016.58647-1-philmd@linaro.org>
New wrapper around gen_io_start which takes care of the USE_ICOUNT
check, as well as marking the DisasContext to end the TB.
Remove exec/gen-icount.h.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for compiling tcg/ only once, eliminate
the all_helpers array. Instantiate the info structs for
the generic helpers in accel/tcg/, and the structs for
the target-specific helpers in each translate.c.
Since we don't see all of the info structs at startup,
initialize at first use, using g_once_init_* to make
sure we don't race while doing so.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses were read-write, so replace with a new
allocation and initialization.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use a C test instead of a pre-processor test for the id.
Use tcg_constant_i64 instead of tcg_const_i64.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230306175230.7110-8-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These inline helpers are all used by target specific code so move them
out of the general header so we don't needlessly pollute the rest of
the API with target specific stuff.
Note we have to include cpu.h in semihosting as it was relying on a
side effect before.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-21-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-21-richard.henderson@linaro.org>
Translators are no longer required to free tcg temporaries.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This wasn't actually used at all, just some unused
macro re-definitions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation for returning the number of insns generated
via the same pointer. Adjust only the prototypes so far.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230227135202.9710-24-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221217173219.8715-3-philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221217173219.8715-2-philmd@linaro.org>
The 'hwaddr' type is only available / meaningful on system emulation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221216215519.5522-5-philmd@linaro.org>
The fid instruction (Floating-Point Identify) puts the FPU model and
revision into the Status Register. Since those values shouldn't be 0,
store values there which a PCX-L2 (for 32-bit) or a PCX-W2 (for 64-bit)
would return. Noticed while trying to install MPE/iX.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Qemu currently emulates a 32-bit CPU only, and crashes with this error
when it faces a 64-bit load (e.g. "ldd 0(r26),r0") or a 64-bit store
(e.g. "std r26,0(r26)") instruction in the guest:
ERROR:../qemu/tcg/tcg-op.c:2822:tcg_canonicalize_memop: code should not be reached
Add checks for 64-bit sizes and generate an illegal instruction
exception if necessary.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The availability of tb->pc will shortly be conditional.
Introduce accessor functions to minimize ifdefs.
Pass around a known pc to places like tcg_gen_code,
where the caller must already have the value.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Include the IIR register (which holds the opcode of the failing
instruction) when dumping the hppa registers.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220918194555.83535-7-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Pass these along to translator_loop -- pc may be used instead
of tb->pc, and host_pc is currently unused. Adjust all targets
at one time.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The proberi assembler instruction checks the read/write access rights
for the page of a given address and shall return a value of 1 if the
test succeeds and a value of 0 on failure in the target register.
But when run in linux-user mode, qemu currently simply returns the
return code of page_check_range() which returns 0 on success and -1 on
failure, which is the opposite of what proberi should return.
Fix it by checking the return code of page_check_range() and return the
expected return value.
The easiest way to reproduce the issue is by running
"/lib/ld.so.1 --version" in a chroot which fails without this patch.
At startup of ld.so the __canonicalize_funcptr_for_compare() function is
used to resolve the function address out of a function descriptor, which
fails because proberi (due to the wrong return code) seems to indicate
that the given address isn't accessible.
Signed-off-by: Helge Deller <deller@gmx.de>
We commonly define the header guard symbol without an explicit value.
Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-4-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
The types are no longer used in bswap.h since commit
f930224fff ("bswap.h: Remove unused float-access functions"), there
isn't much sense in keeping it there and having a dependency on fpu/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-29-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
