Modern way is using blockdev-add + blockdev-backup, which provides a
lot more control on how target is opened.
As example of drive-backup problems consider the following:
User of drive-backup expects that target will be opened in the same
cache and aio mode as source. Corresponding logic is in
drive_backup_prepare(), where we take bs->open_flags of source.
It works rather bad if source was added by blockdev-add. Assume source
is qcow2 image. On blockdev-add we should specify aio and cache options
for file child of qcow2 node. What happens next:
drive_backup_prepare() looks at bs->open_flags of qcow2 source node.
But there no BDRV_O_NOCAHE neither BDRV_O_NATIVE_AIO: BDRV_O_NOCAHE is
places in bs->file->bs->open_flags, and BDRV_O_NATIVE_AIO is nowhere,
as file-posix parse options and simply set s->use_linux_aio.
The documentation is updated in a minimal way, so that drive-backup is
noted only as a deprecated command, and blockdev-backup used in most of
places.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We are going to deprecate drive-backup, so use modern interface here.
In examples where target image creation is shown, show blockdev-add as
well. If target creation omitted, omit blockdev-add as well.
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
We are going to deprecate drive-backup, so don't mention it here.
Moreover, blockdev-backup seems more correct in the context.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Commit 497a30dbb0 ("qemu-img: Require -F with -b backing image")
removed the content of the "Related binaries" section but forgot
to remove the section title. Since it is now empty, remove it too.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Joaquin de Andres <me@xcancerberox.com.ar>
Message-Id: <20211105142656.145791-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
To run user-mode emulation tests, we introduced the
avocado_qemu.QemuUserTest which inherits from avocado_qemu.QemuBaseTest.
System-mode emulation tests are based on the avocado_qemu.Test class,
which also inherits avocado_qemu.QemuBaseTest. To avoid confusion,
rename it as avocado_qemu.QemuSystemTest.
Suggested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211105143416.148332-7-f4bug@amsat.org>
In the discussion about renaming the `tests/acceptance` [1], the
conclusion was that the folders inside `tests` are related to the
framework running the tests and not directly related to the type of
the tests.
This changes the folder to `tests/avocado` and adjusts the MAKEFILE, the
CI related files and the documentation.
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-05/msg06553.html
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20211105155354.154864-3-willianr@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
* extend --extra-*flags behavior to meson-based tests
* allow using snappy in static builds
* i386 TCG fixes
* fix build failure when libgbm is not available
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGJB/gUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM0+gf/STwGM2h7I/1V/rAQnLzpA4Y9iMwB
urMjz5rBqSpBSvyxA83JAj7a/6V70U+gm+03Nh4zdKyvKKzVmsSHtLU6EbZFUy5y
+agY6AoB/3VLIWSf8zJ5KsxLS3r030mvu6XBbs94AEDbQ5O4YjO+Tb5r/dIOVhJb
W1B59cPvkSmmBoFnJe2/CNcHf0AMDQ96ge2su+Sx909Lyo94r6kibFb1bkjep/ke
0f21o3nAXSN/GBoZutLyZvMdEpwddrYwjVIyV2zCKL2XjTVXDKIphHM2iLyJxNli
mnsQY51ZVdNkNAVy76nUWQ4+nJ/kT8Dhcl+6kWvI373PgokmEVpgZ0QKHQ==
=GH6j
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Fix off-by-one in MODE SELECT commands
* extend --extra-*flags behavior to meson-based tests
* allow using snappy in static builds
* i386 TCG fixes
* fix build failure when libgbm is not available
# gpg: Signature made Mon 08 Nov 2021 12:20:24 PM CET
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* remotes/bonzini/tags/for-upstream:
ui/gtk-egl: Fix build failure when libgbm is not available
configure: ignore preexisting QEMU_*FLAGS envvars
configure: propagate --extra-cflags and --extra-ldflags to meson compile tests
configure: preserve CFLAGS, CXXFLAGS and LDFLAGS in config.status
configure: simplify calls to meson_quote
docs: adjust for demise of scripts/create_config
meson: perform snappy test with the C++ compiler if used
hw/scsi/scsi-disk: MODE_PAGE_ALLS not allowed in MODE SELECT commands
target-i386: mmu: fix handling of noncanonical virtual addresses
target-i386: mmu: use pg_mode instead of HF_LMA_MASK
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The config-host.h, $TARGET_NAME-config-target.h,
$TARGET_NAME-config-devices.h files are now generated by
configure_file() rather than scripts/create_config. Adjust
he relevant paragraph in docs/devel/build-system.rst, and take
the occasion to fix a preexisting confusion of *.h vs *.mak.
Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This interprets single-backtick syntax in all of our Sphinx docs as a
cross-reference to *something*, including Python symbols.
From here on out, new uses of `backticks` will cause a build failure if
the target cannot be referenced.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20211004215238.1523082-4-jsnow@redhat.com>
The series rotted already. Here's the new changes.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
[ extra backticks fixes ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211004215238.1523082-3-jsnow@redhat.com>
The single backtick markup in ReST is the "default role". Currently,
Sphinx's default role is called "content". Sphinx suggests you can use
the "Any" role instead to turn any single-backtick enclosed item into a
cross-reference.
This is useful for things like autodoc for Python docstrings, where it's
often nicer to reference other types with `foo` instead of the more
laborious :py:meth:`foo`. It's also useful in multi-domain cases to
easily reference definitions from other Sphinx domains, such as
referencing C code definitions from outside of kerneldoc comments.
Before we do that, though, we'll need to turn all existing usages of the
"content" role to inline verbatim markup wherever it does not correctly
resolve into a cross-refernece by using double backticks instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20211004215238.1523082-2-jsnow@redhat.com>
This is pretty ubiquitous. ('/' is already taken by some browsers for
quick search)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Allow navigating to the previous/next page using the keyboard's left and
right arrows. I wish this would be the default, and that the themes
would provide more key navigation, but that doesn't seem on the roadmap.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Static files dependencies is now handled by depfile.py.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Module dependencies is now handled by depfile.py.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
cache plugin now allows optional L2 per-core cache emulation that can be
configured through plugin arguments, this commit adds this functionality
to the docs.
While I'm at it, I editted the bullet point for cache plugin to say:
contrib/plugins/cache.c
instead of
contrib/plugins/cache
to match other plugins.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210810134844.166490-6-ma.mandourr@gmail.com>
Message-Id: <20211026102234.3961636-18-alex.bennee@linaro.org>
* DMA support in the multiboot option ROM
* Rename default-bus-bypass-iommu
* Deprecate -watchdog and cleanup -watchdog-action
* HVF fix for <PAGE_SIZE regions
* Support TSC scaling for AMD nested virtualization
* Fix for ESP fuzzing bug
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGBUeEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOh+Qf+OMRhRiv6dYjbK/5zXrx81AgxYAY3
dBUSr8v16LyrMl1U3DZWzhD+MzQsC83m/Xsh4lGxlHDWtkK9QQA5xDG95JZdY26i
MGCbbjnFHISbyBQV9Y724gPfPjOOODuoFbzafSx6VLITOcyv1ye0cm7TOjOPB+tt
E4c3JqTZ7g8a5yMe8ItkVhz5pPY+oVw8dxMNRp6Sup5Dbfx0DjacIwLasLsHfPL7
qBADfqB20ovHUzLjXu7oWgEd4KxJ6kiSCaJJu/KD36hg0wB8+WVP1o43j4PkczHT
QjU7eZaeaTrN5Cf34ttPge6QReMi5SFNCaA9O9/HLqrQgdEtt/diZWuqjQ==
=a2mC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Build system fixes and cleanups
* DMA support in the multiboot option ROM
* Rename default-bus-bypass-iommu
* Deprecate -watchdog and cleanup -watchdog-action
* HVF fix for <PAGE_SIZE regions
* Support TSC scaling for AMD nested virtualization
* Fix for ESP fuzzing bug
# gpg: Signature made Tue 02 Nov 2021 10:57:37 AM EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* remotes/bonzini/tags/for-upstream: (27 commits)
configure: fix --audio-drv-list help message
configure: Remove the check for the __thread keyword
Move the l2tpv3 test from configure to meson.build
meson: remove unnecessary coreaudio test program
meson: remove pointless warnings
meson.build: Allow to disable OSS again
meson: bump submodule to 0.59.3
qtest/am53c974-test: add test for cancelling in-flight requests
esp: ensure in-flight SCSI requests are always cancelled
KVM: SVM: add migration support for nested TSC scaling
hw/i386: fix vmmouse registration
watchdog: remove select_watchdog_action
vl: deprecate -watchdog
watchdog: add information from -watchdog help to -device help
hw/i386: Rename default_bus_bypass_iommu
hvf: Avoid mapping regions < PAGE_SIZE as ram
configure: do not duplicate CPU_CFLAGS into QEMU_LDFLAGS
configure: remove useless NPTL probe
target/i386: use DMA-enabled multiboot ROM for new-enough QEMU machine types
optionrom: add a DMA-enabled multiboot ROM
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is obsolete since SeaBIOS 1.11.0 introduced native support for
sending messages to the serial console. The new support can be
activated using -machine graphics=off on x86 targets.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210909123219.862652-1-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We no longer wish to have commands implemented in HMP only. All commands
should start with a QMP implementation and the HMP merely be a shim
around this. To reduce the burden of implementing QMP commands where
there is low expectation of machine usage, requirements for QAPI
modelling are relaxed provided the command is under the "x-" name
prefix.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This illustrates how to add a QMP command returning unstructured text,
following the guidelines added in the previous patch. The example uses
a simplified version of 'info roms'.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Traditionally we have required that newly added QMP commands will model
any returned data using fine grained QAPI types. This is good for
commands that are intended to be consumed by machines, where clear data
representation is very important. Commands that don't satisfy this have
generally been added to HMP only.
In effect the decision of whether to add a new command to QMP vs HMP has
been used as a proxy for the decision of whether the cost of designing a
fine grained QAPI type is justified by the potential benefits.
As a result the commands present in QMP and HMP are non-overlapping
sets, although HMP comamnds can be accessed indirectly via the QMP
command 'human-monitor-command'.
One of the downsides of 'human-monitor-command' is that the QEMU monitor
APIs remain tied into various internal parts of the QEMU code. For
example any exclusively HMP command will need to use 'monitor_printf'
to get data out. It would be desirable to be able to fully isolate the
monitor implementation from QEMU internals, however, this is only
possible if all commands are exclusively based on QAPI with direct
QMP exposure.
The way to achieve this desired end goal is to finese the requirements
for QMP command design. For cases where the output of a command is only
intended for human consumption, it is reasonable to want to simplify
the implementation by returning a plain string containing formatted
data instead of designing a fine grained QAPI data type. This can be
permitted if-and-only-if the command is exposed under the 'x-' name
prefix. This indicates that the command data format is liable to
future change and that it is not following QAPI design best practice.
The poster child example for this would be the 'info registers' HMP
command which returns printf formatted data representing CPU state.
This information varies enourmously across target architectures and
changes relatively frequently as new CPU features are implemented.
It is there as debugging data for human operators, and any machine
usage would treat it as an opaque blob. It is thus reasonable to
expose this in QMP as 'x-query-registers' returning a 'str' field.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Best practice is to use the 'hmp_handle_error' function, not
'monitor_printf' or 'error_report_err'. This ensures that the
message always gets an 'Error: ' prefix, distinguishing it
from normal command output.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The new headings reflect the intended structure of the document and will
better suit additions that follow.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The file already covers writing HMP commands, in addition to
the QMP commands, so it deserves a more general name.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
-watchdog is the same as -device except that it is case insensitive (and it
allows only watchdog devices of course). Now that "-device help" can list
as such the available watchdog devices, we can deprecate it.
Note that even though -watchdog tries to be case insensitive, it fails
at that: "-watchdog i6300xyz" fails with "Unknown -watchdog device",
but "-watchdog i6300ESB" also fails (when the generated -device option
is processed) with an error "'i6300ESB' is not a valid device model name".
For this reason, the documentation update does not mention the case
insensitivity of -watchdog.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use consistent capitalization, and fix a missed line (we duplicate the
qemu-img synopses in too many places).
Fixes: 1899bf4737 (qemu-img: Add -F shorthand to convert)
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210921142812.2631605-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
By convention, names starting with "x-" are experimental. The parts
of external interfaces so named may be withdrawn or changed
incompatibly in future releases.
The naming convention makes unstable interfaces easy to recognize.
Promoting something from experimental to stable involves a name
change. Client code needs to be updated. Occasionally bothersome.
Worse, the convention is not universally observed:
* QOM type "input-barrier" has properties "x-origin", "y-origin".
Looks accidental, but it's ABI since 4.2.
* QOM types "memory-backend-file", "memory-backend-memfd",
"memory-backend-ram", and "memory-backend-epc" have a property
"x-use-canonical-path-for-ramblock-id" that is documented to be
stable despite its name.
We could document these exceptions, but documentation helps only
humans. We want to recognize "unstable" in code, like "deprecated".
So support recognizing it the same way: introduce new special feature
flag "unstable". It will be treated specially by the QAPI generator,
like the existing feature flag "deprecated", and unlike regular
feature flags.
This commit updates documentation and prepares tests. The next commit
updates the QAPI schema. The remaining patches update the QAPI
generator and wire up -compat policy checking.
Management applications can then use query-qmp-schema and -compat to
manage or guard against use of unstable interfaces the same way as for
deprecated interfaces.
docs/devel/qapi-code-gen.txt no longer mandates the naming convention.
Using it anyway might help writers of programs that aren't
full-fledged management applications. Not using it can save us
bothersome renames. We'll see how that shakes out.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20211028102520.747396-2-armbru@redhat.com>
This is quite similar to commit 84ab008687 "qapi: Add feature flags to
struct members", only for enums instead of structs.
Special feature flag 'deprecated' is silently ignored there. This is
okay only because it will be implemented shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20211025042405.3762351-3-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
The next commit will add feature flags to enum members. There's a
problem, though: query-qmp-schema shows an enum type's members as an
array of member names (SchemaInfoEnum member @values). If it showed
an array of objects with a name member, we could simply add more
members to these objects. Since it's just strings, we can't.
I can see three ways to correct this design mistake:
1. Do it the way we should have done it, plus compatibility goo.
We want a ['SchemaInfoEnumMember'] member in SchemaInfoEnum. Since
changing @values would be a compatibility break, add a new member
@members instead.
@values is now redundant. In my testing, output of
qemu-system-x86_64's query-qmp-schema grows by 11% (18.5KiB).
We can deprecate @values now and drop it later. This will break
outmoded clients. Well-behaved clients such as libvirt are
expected to break cleanly.
2. Like 1, but omit "boring" elements of @member, and empty @member.
@values does not become redundant. @members augments it. Somewhat
cumbersome, but output of query-qmp-schema grows only as we make
enum members non-boring.
There is nothing to deprecate here.
3. Versioned query-qmp-schema.
query-qmp-schema provides either @values or @members. The QMP
client can select which version it wants. There is no redundant
output.
We can deprecate old versions and eventually drop them. This will
break outmoded clients. Breaking cleanly is easier than for 1.
While 1 and 2 operate within the common rules for compatible
evolution apply (section "Compatibility considerations" in
docs/devel/qapi-code-gen.rst), 3 bypasses them. Attractive when
operating within the rules is just too awkward. Not the case here.
This commit implements 1. Libvirt developers prefer it.
Deprecate @values in favour of @members. Since query-qmp-schema
compatibility is pretty fundamental for management applications, an
extended grace period is advised.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20211025042405.3762351-2-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Right now for xattr remapping, we support types of "prefix", "ok" or "bad".
Type "bad" returns -EPERM on setxattr and hides xattr in listxattr. For
getxattr, mapping code returns -EPERM but getxattr code converts it to -ENODATA.
I need a new semantics where if an xattr is unsupported, then
getxattr()/setxattr() return -ENOTSUP and listxattr() should hide the xattr.
This is needed to simulate that security.selinux is not supported by
virtiofs filesystem and in that case client falls back to some default
label specified by policy.
So add a new type "unsupported" which returns -ENOTSUP on getxattr() and
setxattr() and hides xattrs in listxattr().
For example, one can use following mapping rule to not support
security.selinux xattr and allow others.
"-o xattrmap=/unsupported/all/security.selinux/security.selinux//ok/all///"
Suggested-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <YUt9qbmgAfCFfg5t@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add description and example for the vhost-user based RNG implementation.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Message-Id: <20211012205904.4106769-4-mathieu.poirier@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Right now meson_options.txt lists about 90 options. Each option
needs code in configure to parse it and pass the option down to Meson as
a -D command-line argument; in addition the default must be duplicated
between configure and meson_options.txt. This series tries to remove
the code duplication by generating the case statement for those --enable
and --disable options, as well as the corresponding help text.
About 80% of the options can be handled completely by the new mechanism.
Eight meson options are not of the --enable/--disable kind. Six more need
to be parsed in configure for various reasons documented in the patch,
but they still have their help automatically generated.
The advantages are:
- less code in configure
- parsing and help is more consistent (for example --enable-blobs was
not supported)
- options are described entirely in one place, meson_options.txt.
This make it more attractive to use Meson options instead of
hand-crafted configure options and config-host.mak
A few options change name: --enable-tcmalloc and --enable-jemalloc
become --enable-malloc={tcmalloc,jemalloc}; --disable-blobs becomes
--disable-install-blobs; --enable-trace-backend becomes
--enable-trace-backends. However, the old names are allowed
for backwards compatibility.
Message-Id: <20211007130829.632254-19-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These functions are much closer to the softmmu helper
functions, in that they take the complete MemOpIdx,
and from that they may enforce required alignment.
The previous cpu_ldst.h functions did not have alignment info,
and so did not enforce it. Retain this by adding MO_UNALN to
the MemOp that we create in calling the new functions.
Note that we are not yet enforcing alignment for user-only,
but we now have the information with which to do so.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Meson 0.58.2 does not need b_staticpic=$pie anymore, and has
stabilized the keyval module. Remove the workaround and use a few
replacements for features deprecated in the 0.57.0 release cycle.
One feature that we would like to use is passing dependencies to
summary. However, that was broken in 0.59.0 and 0.59.1. Therefore,
use the embedded Meson if the host has anything older than 0.59.2,
but allow --meson= to use 0.58.2.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM PV features don't seem to be documented anywhere, in particular, the
fact that some of the features are enabled by default and some are not can
only be figured out from the code.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211004140445.624875-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up the heading levels to use === --- ~~~ ^^^ '''. Reorganize the
outline for the Avocado part, and always include headings for the
class names.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up the heading levels to use === --- ~~~, and move the command line
building near to the other execution steps.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM implements some Hyper-V 2016 functions so providing WS2008R2 version
is somewhat incorrect. While generally guests shouldn't care about it
and always check feature bits, it is known that some tools in Windows
actually check version info.
For compatibility reasons make the change for 6.2 machine types only.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210902093530.345756-9-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
