Currently we have 2 types of vhost backends in QEMU: vhost kernel and
vhost-user. The above patch provides a generic device for vDPA purpose,
this vDPA device exposes to user space a non-vendor-specific configuration
interface for setting up a vhost HW accelerator, this patch set introduces
a third vhost backend called vhost-vdpa based on the vDPA interface.
Vhost-vdpa usage:
qemu-system-x86_64 -cpu host -enable-kvm \
......
-netdev type=vhost-vdpa,vhostdev=/dev/vhost-vdpa-id,id=vhost-vdpa0 \
-device virtio-net-pci,netdev=vhost-vdpa0,page-per-vq=on \
Signed-off-by: Lingshan zhu <lingshan.zhu@intel.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Cindy Lu <lulu@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200701145538.22333-14-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Add a pair of configure options --{enable,disable}-libdaxctl to control
whether QEMU is compiled with libdaxctl [1]. Libdaxctl is a utility
library for managing the device dax subsystem.
QEMU uses mmap(2) to maps vNVDIMM backends and aligns the mapping
address to the page size (getpagesize(2)) by default. However, some
types of backends may require an alignment different than the page
size. The 'align' option is provided to memory-backend-file to allow
users to specify the proper alignment.
For device dax (e.g., /dev/dax0.0), the 'align' option needs to match
the alignment requirement of the device dax, which can be fetched
through the APIs of libdaxctl version 57 or up.
[1] Libdaxctl is a part of ndctl project.
The project's repository is: https://github.com/pmem/ndctl
For more information about libdaxctl APIs, you can refer to the
comments in source code of: pmem/ndctl/daxctl/lib/libdaxctl.c.
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jingqi Liu <jingqi.liu@intel.com>
Message-Id: <20200429085011.63752-4-jingqi.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a flag to enable/disable the SafeStack instrumentation
provided by LLVM.
On enable, make sure that the compiler supports the flags, and that we
are using the proper coroutine implementation (coroutine-ucontext).
On disable, explicitly disable the option if it was enabled by default.
While SafeStack is supported only on Linux, NetBSD, FreeBSD and macOS,
we are not checking for the O.S. since this is already done by LLVM.
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-id: 20200529205122.714-4-dbuono@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On aarch64, gcc 9.3 is generating
qemu/exec.c: In function ‘address_space_translate_iommu’:
qemu/exec.c:431:28: note: parameter passing for argument of type \
‘MemTxAttrs’ {aka ‘struct MemTxAttrs’} changed in GCC 9.1
and many other repetitions. This structure, and the functions
amongst which it is passed, are not part of a QEMU public API.
Therefore we do not care how the compiler passes the argument,
so long as the compiler is self-consistent.
The only portion of QEMU which does have a public api, and so
must have a stable abi, is "qemu/plugin.h". We test this by
forcing -Wpsabi in tests/plugin/Makefile.
Buglink: https://bugs.launchpad.net/qemu/+bug/1881552
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200617201309.1640952-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clang 10 enables this by default with -Wtype-limit.
All of the instances flagged by this Werror so far have been
cases in which we really do want the compiler to optimize away
the test completely. Disabling the warning will avoid having
to add ifdefs to work around this.
Cc: Eric Blake <eblake@redhat.com>
Buglink: https://bugs.launchpad.net/qemu/+bug/1878628
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200617201309.1640952-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use a helper function to tidy the assembly of gcc_flags.
Separate flags that disable warnings from those that enable,
and sort the disable warnings to the end.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200617201309.1640952-4-richard.henderson@linaro.org
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We tried running QEMU under tsan in 2016, but tsan's lack of support for
longjmp-based fibers was a blocker:
https://groups.google.com/forum/#!topic/thread-sanitizer/se0YuzfWazw
Fortunately, thread sanitizer gained fiber support in early 2019:
https://reviews.llvm.org/D54889
This patch brings tsan support upstream by importing the patch that annotated
QEMU's coroutines as tsan fibers in Android's QEMU fork:
https://android-review.googlesource.com/c/platform/external/qemu/+/844675
Tested with '--enable-tsan --cc=clang-9 --cxx=clang++-9 --disable-werror'
configure flags.
Signed-off-by: Lingfeng Yang <lfy@google.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
[cota: minor modifications + configure changes]
Signed-off-by: Robert Foley <robert.foley@linaro.org>
[RF: configure changes, coroutine fix + minor modifications]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200609200738.445-2-robert.foley@linaro.org>
Message-Id: <20200612190237.30436-5-alex.bennee@linaro.org>
dtc submodule update, now call the libfdt target from the new
dtc Makefile, which has been changed to not require bison, flex, etc.
This removes warnings during the build.
scripts/ symlink and tests directory creation are not necessary,
and neither is calling the clean rule explicitly.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200518160319.18861-2-cfontana@suse.de>
Message-Id: <20200612190237.30436-3-alex.bennee@linaro.org>
The git-submodule.sh script is called by make and initialize the
submodules listed in the GIT_SUBMODULES variable generated by
./configure.
SLOF is required for building the s390-ccw firmware on s390x, since
it is using the libnet code from SLOF for network booting.
Add it to the GIT_SUBMODULES when building the s390-ccw firmware.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200615074919.12552-1-f4bug@amsat.org>
[thuth: Tweaked the commit message a little bit]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add tests:
test_secret_keyring_good;
test_secret_keyring_revoked_key;
test_secret_keyring_expired_key;
test_secret_keyring_bad_serial_key;
test_secret_keyring_bad_key_access_right;
Added tests require libkeyutils. The absence of this library is not
critical, because these tests will be skipped in this case.
Signed-off-by: Alexey Krasikov <alex-krasikov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add the ability for the secret object to obtain secret data from the
Linux in-kernel key managment and retention facility, as an extra option
to the existing ones: reading from a file or passing directly as a
string.
The secret is identified by the key serial number. The upper layers
need to instantiate the key and make sure the QEMU process has access
permissions to read it.
Signed-off-by: Alexey Krasikov <alex-krasikov@yandex-team.ru>
- Fixed up detection logic default behaviour in configure
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In case of not using random-number needing feature, it makes sense to
skip RNG init too. This is especially helpful when QEMU is sandboxed in
Stubdomain under Xen, where there is very little entropy so initial
getrandom() call delays the startup several seconds. In that setup, no
random bytes are needed at all.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch introduces a vhost-user device for vsock, using the
vhost-vsock-common parent class.
The vhost-user-vsock device can be used to implement the virtio-vsock
device emulation in user-space.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200522122512.87413-3-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Not checking the value of malloc will cause a warning with GCC 10.1,
which may result in configuration failure, with the following line in
config.log:
config-temp/qemu-conf.c:2:18: error: ignoring return value of ‘malloc’ declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
2 | int main(void) { malloc(1); return 0; }
| ^~~~~~~~~
Signed-off-by: Leonid Bloch <lb.workbox@gmail.com>
Message-Id: <20200524221204.9791-1-lb.workbox@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid building TCG when building only tools:
./configure --enable-tools --disable-system --disable-user
This saves us from running the soft-float tests enabled since
commit 7617010250.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200522172510.25784-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Preparing for Loongson-3 virtualization, add KVM target support for
MIPS64 in configure script.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <1588501221-1205-2-git-send-email-chenhc@lemote.com>
Not all distros ship genisoimage which is a Debian fork from the
original cdrtools. As the options are pretty much the same support it
as a fallback binary.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200519132259.405-2-robert.foley@linaro.org>
This commit adds a new audiodev backend to allow QEMU to use JACK as
both an audio sink and source.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-Id: <20200512101603.E3DB73A038E@moya.office.hostfission.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Based on a mail on the qemu-devel mailing list at
https://lists.nongnu.org/archive/html/qemu-devel/2020-05/msg02909.html
and some internet research the GTK3 versions on supported
platforms are:
RHEL-7.4: 3.22.10
RHEL-7.5: 3.22.26
Debian (Stretch): 3.22.11
Debian (Buster): 3.24.5
OpenBSD (Ports): 3.22.30
FreeBSD (Ports): 3.22.29
OpenSUSE Leap 15: 3.22.30
SLE12-SP2: Unknown
SLE15: 3.22.30
Ubuntu (Bionic): 3.22.30
Ubuntu (Focal): 3.24.18
macOS (Homebrew): 3.22.30
This justifies increasing the minimum required GTK version in
QEMU to 3.22.0.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200516072014.7766-11-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
GDB's remote protocol requires M-profile cores to use the feature
name 'org.gnu.gdb.arm.m-profile' instead of the 'org.gnu.gdb.arm.core'
feature used for A- and R-profile cores. We weren't doing this, which
meant GDB treated our M-profile cores like A-profile ones. This mostly
doesn't matter, but for instance means that it doesn't correctly
handle backtraces where an M-profile exception frame is involved.
Ship a copy of GDB's arm-m-profile.xml and use it on the M-profile
cores. The integer registers have the same offsets as the
arm-core.xml, but register 25 is the M-profile XPSR rather than the
A-profile CPSR, so we need to update arm_cpu_gdb_read_register() and
arm_cpu_gdb_write_register() to handle XSPR reads and writes.
Fixes: https://bugs.launchpad.net/qemu/+bug/1877136
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200507134755.13997-1-peter.maydell@linaro.org
zstd significantly reduces cluster compression time.
It provides better compression performance maintaining
the same level of the compression ratio in comparison with
zlib, which, at the moment, is the only compression
method available.
The performance test results:
Test compresses and decompresses qemu qcow2 image with just
installed rhel-7.6 guest.
Image cluster size: 64K. Image on disk size: 2.2G
The test was conducted with brd disk to reduce the influence
of disk subsystem to the test results.
The results is given in seconds.
compress cmd:
time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd]
src.img [zlib|zstd]_compressed.img
decompress cmd
time ./qemu-img convert -O qcow2
[zlib|zstd]_compressed.img uncompressed.img
compression decompression
zlib zstd zlib zstd
------------------------------------------------------------
real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %)
user 65.0 15.8 5.3 2.5
sys 3.3 0.2 2.0 2.0
Both ZLIB and ZSTD gave the same compression ratio: 1.57
compressed image size in both cases: 1.4G
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-4-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently "cf-core.xml" is sent to GDB when using any m68k flavor. Thing is
it uses the "org.gnu.gdb.coldfire.core" feature name and gdb 8.3 then expects
a coldfire FPU instead of the default m68881 FPU.
This is not OK because the m68881 floats registers are 96 bits wide so it
crashes GDB with the following error message:
(gdb) target remote localhost:7960
Remote debugging using localhost:7960
warning: Register "fp0" has an unsupported size (96 bits)
warning: Register "fp1" has an unsupported size (96 bits)
...
Remote 'g' packet reply is too long (expected 148 bytes, got 180 bytes): \
00000000000[...]0000
With this patch: qemu-system-m68k -M none -cpu m68020 -s -S
(gdb) tar rem :1234
Remote debugging using :1234
warning: No executable has been specified and target does not support
determining executable automatically. Try using the "file" command.
0x00000000 in ?? ()
(gdb) p $fp0
$1 = nan(0xffffffffffffffff)
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1588094279-17913-3-git-send-email-frederic.konrad@adacore.com>
Message-Id: <20200430190122.4592-10-alex.bennee@linaro.org>
As gdb will generally be talking to "foreign" guests lets use that if
we can. Otherwise the chances of gdb barfing are considerably higher.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200430190122.4592-2-alex.bennee@linaro.org>
It seems on some compilers the test can pass but still give you
broken binaries.
Fixes: d2cd29e307
Fixes: https://bugs.launchpad.net/qemu/+bug/1871798
Cc: Bug 1871798 <1871798@bugs.launchpad.net>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Tested-by: James Le Cuirot <chewi@aura-online.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200414200631.12799-9-alex.bennee@linaro.org>
Otherwise it's hard to debug whats going on.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200414200631.12799-8-alex.bennee@linaro.org>
If we are not making warnings fatal for compilation, make them
non-fatal when building the Sphinx documentation also. (For instance
Sphinx 3.0 warns about some constructs that older versions were happy
with, which is a build failure if we use the warnings-as-errors
flag.)
This provides a workaround at least for LP:1872113.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200411182934.28678-2-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Without -Werror, the probe may succeed, but then compilation fails
later when -Werror is added for other reasons. Shows up on windows,
where the compiler complains about -fPIC.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200401214756.6559-1-richard.henderson@linaro.org>
Message-Id: <20200403191150.863-13-alex.bennee@linaro.org>
Recent toolchains support static and pie at the same time.
As with normal dynamic builds, allow --static to default to PIE
if supported by the toolchain. Allow --enable/--disable-pie to
override the default.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Fix --disable-pie --static
v3: Update for QEMU_LDFLAGS.
Some distributions, e.g. Ubuntu 19.10, enable PIE by default.
If for some reason one wishes to build a non-pie binary, we
must provide additional options to override.
At the same time, reorg the code to an elif chain.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Update for QEMU_LDFLAGS.
There is nothing about these options that is related to PIE.
Use them unconditionally.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Fangrui Song <i@maskray.me>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Do not split into two tests.
v3: Update to QEMU_LDFLAGS.
The CFLAGS_NOPIE and LDFLAGS_NOPIE variables are used
in pc-bios/optionrom/Makefile, which has nothing to do
with the PIE setting of the main qemu executables.
This overrides any operating system default to build
all executables as PIE, which is important for ROMs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PIE is supported on many other hosts besides x86.
The default for non-x86 is now the same as x86: pie is used
if supported, and may be forced via --enable/--disable-pie.
The original commit (40d6444e91) said:
"Non-x86 are not changed, as they require TCG changes"
but I think that's wrong -- there's nothing about PIE that
affects TCG one way or another.
Tested on aarch64 (bionic) and ppc64le (centos 7) hosts.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This adjustment was random and unnecessary. The user mode
startup code in probe_guest_base() will choose a value for
guest_base that allows the host qemu binary to not conflict
with the guest binary.
With modern distributions, this isn't even used, as the default
is PIE, which does the same job in a more portable way.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v2: Remove mention of config-host.ld from make distclean
While debugging check-acceptance failures I found an instability in
the mips64el test case. Briefly the test case:
retry.py -n 100 -c -- ./mips64el-softmmu/qemu-system-mips64el \
-display none -vga none -serial mon:stdio \
-machine malta -kernel ./vmlinux-4.7.0-rc1.I6400 \
-cpu I6400 -smp 8 -vga std \
-append "printk.time=0 clocksource=GIC console=tty0 console=ttyS0 panic=-1" \
--no-reboot
Reports about a 9% failure rate:
Results summary:
0: 91 times (91.00%), avg time 5.547 (0.45 varience/0.67 deviation)
-6: 9 times (9.00%), avg time 3.394 (0.02 varience/0.13 deviation)
Ran command 100 times, 91 passes
When re-run with "--accel tcg,thread=single" the instability goes
away.
Results summary:
0: 100 times (100.00%), avg time 17.318 (249.76 varience/15.80 deviation)
Ran command 100 times, 100 passes
Which seems to indicate there is some aspect of the MIPS MTTCG fixes
that has been missed. Ideally we would fix that but I'm afraid I don't
have time to investigate and am not super familiar with the
architecture anyway. In lieu of someone tracking down the failure lets
disable it for now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Message-Id: <20200323161514.23952-7-alex.bennee@linaro.org>
This patch fixes two problems:
- it cleanups linux-user variants (for instance ppc64-linux-user
and ppc64le-linux-user)
- it removes the .o file when it removes the .d file, otherwise the .o
file is never updated
Fixes: 5f29856b85 ("linux-user, configure: improve syscall_nr.h dependencies checking")
Fixes: 4d6a835dea ("linux-user: introduce parameters to generate syscall_nr.h")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200325075757.1959961-1-laurent@vivier.eu>
This is mostly a fix for in-tree build.
It removes errors on .d directories:
grep: ./.gitlab-ci.d: Is a directory
grep: ./scripts/qemu-guest-agent/fsfreeze-hook.d: Is a directory
and improves performance by only checking <ARCH>-linux-user directories.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200323114116.163609-1-laurent@vivier.eu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Copy syscall_n32.tbl, syscall_n64.tbl and syscallhdr.sh from
linux/arch/parisc/kernel/syscalls v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
Move the offsets (6000 for n32 and 5000 for n64) from the file to
the Makefile.objs to be passed to syscallhdr.sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-18-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Copy syscall.tbl and syscallhdr.sh from linux/arch/mips/kernel/syscalls/syscall_o32.tbl v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
Move the offset (4000) from the file to the Makefile.objs to be passed
to syscallhdr.sh
Rename on the fly fadvise64 to fadvise64_64.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-17-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Copy syscall.tbl and syscallhdr.sh from linux/arch/ppc/kernel/syscalls v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
and to not generate the entry if entry point is sys_ni_syscall.
Fix ppc/signal.c to define do_sigreturn() for TARGET_ABI32.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-10-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Copy syscall.tbl and syscallhdr.sh from linux/arch/arm/tools/syscalls v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
Update syscall.c to manage TARGET_NR_arm_sync_file_range as it has
replaced TARGET_NR_sync_file_range2
Move existing stuff from linux-user/Makefile.objs to
linux-user/arm/Makefile.objs
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200310103403.3284090-9-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Cindy Lu
Peter Maydell
Jingqi Liu
Daniele Buono
Richard Henderson
Lingfeng Yang
Claudio Fontana
Philippe Mathieu-Daudé
Alexey Krasikov
Marek Marczykowski-Górecki
Stefano Garzarella
Leonid Bloch
Philippe Mathieu-Daudé
Huacai Chen
Alex Bennée
Geoffrey McRae
Volker Rümelin
Denis Plotnikov
KONRAD Frederic
Laurent Vivier