The BDRV_REQ_FUA flag can trivially be allowed in the crypt driver
as a passthrough to the underlying block driver.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170927125340.12360-7-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of sector offset, take the bytes offset when encrypting
or decrypting data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170927125340.12360-6-berrange@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make the crypto driver implement the bdrv_co_preadv|pwritev
callbacks, and also use bdrv_co_preadv|pwritev for I/O
with the protocol driver beneath. This replaces sector based
I/O with byte based I/O, and allows us to stop assuming the
physical sector size matches the encryption sector size.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170927125340.12360-5-berrange@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The crypto APIs report the offset of the data payload as an uint64_t
type, but the block driver is casting to size_t or ssize_t which will
potentially truncate.
Most of the block APIs use int64_t for offsets meanwhile, so even if
using uint64_t in the crypto block driver we are still at risk of
truncation.
Change the block crypto driver to use uint64_t, but add asserts that
the value is less than INT64_MAX.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170927125340.12360-4-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Using 16KB bounce buffers creates a significant performance
penalty for I/O to encrypted volumes on storage which high
I/O latency (rotating rust & network drives), because it
triggers lots of fairly small I/O operations.
On tests with rotating rust, and cache=none|directsync,
write speed increased from 2MiB/s to 32MiB/s, on a par
with that achieved by the in-kernel luks driver. With
other cache modes the in-kernel driver is still notably
faster because it is able to report completion of the
I/O request before any encryption is done, while the
in-QEMU driver must encrypt the data before completion.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170927125340.12360-2-berrange@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
For block drivers that just pass a truncate request to the underlying
protocol, we can now pass the preallocation mode instead of aborting if
it is not PREALLOC_MODE_OFF.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a PreallocMode parameter to the bdrv_truncate() function implemented
by each block driver. Currently, we always pass PREALLOC_MODE_OFF and no
driver accepts anything else.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
While the crypto layer uses a fixed option name "key-secret",
the upper block layer may have a prefix on the options. e.g.
"encrypt.key-secret", in order to avoid clashes between crypto
option names & other block option names. To ensure the crypto
layer can report accurate error messages, we must tell it what
option name prefix was used.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-19-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that all encryption keys must be provided upfront via
the QCryptoSecret API and associated block driver properties
there is no need for any explicit encryption handling APIs
in the block layer. Encryption can be handled transparently
within the block driver. We only retain an API for querying
whether an image is encrypted or not, since that is a
potentially useful piece of metadata to report to the user.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-18-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This converts the qcow driver to make use of the QCryptoBlock
APIs for encrypting image content. This is only wired up to
permit use of the legacy QCow encryption format. Users who wish
to have the strong LUKS format should switch to qcow2 instead.
With this change it is now required to use the QCryptoSecret
object for providing passwords, instead of the current block
password APIs / interactive prompting.
$QEMU \
-object secret,id=sec0,file=/home/berrange/encrypted.pw \
-drive file=/home/berrange/encrypted.qcow,encrypt.format=aes,\
encrypt.key-secret=sec0
Though note that running QEMU system emulators with the AES
encryption is no longer supported, so while the above syntax
is valid, QEMU will refuse to actually run the VM in this
particular example.
Likewise when creating images with the legacy AES-CBC format
qemu-img create -f qcow \
--object secret,id=sec0,file=/home/berrange/encrypted.pw \
-o encrypt.format=aes,encrypt.key-secret=sec0 \
/home/berrange/encrypted.qcow 64M
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-10-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When integrating the crypto support with qcow/qcow2, we don't
want to use the bare LUKS option names "hash-alg", "key-secret",
etc. We need to namespace them to match the nested QAPI schema.
e.g. "encrypt.hash-alg", "encrypt.key-secret"
so that they don't clash with any general qcow options at a later
date.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-3-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The block/crypto.c defines a set of QemuOpts that provide
parameters for encryption. This will also be needed by
the qcow/qcow2 integration, so expose the relevant pieces
in a new block/crypto.h header. Some helper methods taking
QemuOpts are changed to take QDict to simplify usage in
other places.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-2-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Previous commit moved 'opaque' to be the 2nd parameter in the list:
commit 375092332e
Author: Fam Zheng <famz@redhat.com>
Date: Fri Apr 21 20:27:02 2017 +0800
crypto: Make errp the last parameter of functions
Move opaque to 2nd instead of the 2nd to last, so that compilers help
check with the conversion.
this puts it back to the 2nd to last position.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add an Error parameter to the block drivers' bdrv_truncate() interface.
If a block driver does not set this in case of an error, the generic
bdrv_truncate() implementation will do so.
Where it is obvious, this patch also makes some block drivers set this
value.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-4-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
For one thing, this allows us to drop the error message generation from
qemu-img.c and blockdev.c and instead have it unified in
bdrv_truncate().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-3-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Move opaque to 2nd instead of the 2nd to last, so that compilers help
check with the conversion.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170421122710.15373-7-famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message typo corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This makes use of the .bdrv_child_perm() implementation for formats that
we just added. All format drivers expose the permissions they actually
need nows, so that they can be set accordingly and updated when parents
are attached or detached.
The only format not included here is raw, which was already converted
with the other filter drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
The way that attaching bs->file worked was a bit unusual in that it was
the only child that would be attached to a node which is not opened yet.
Because of this, the block layer couldn't know yet which permissions the
driver would eventually need.
This patch moves the point where bs->file is attached to the beginning
of the individual .bdrv_open() implementations, so drivers already know
what they are going to do with the child. This is also more consistent
with how driver-specific children work.
For a moment, bdrv_open() gets its own BdrvChild to perform image
probing, but instead of directly assigning this BdrvChild to the BDS, it
becomes a temporary one and the node name is passed as an option to the
drivers, so that they can simply use bdrv_open_child() to create another
reference for their own use.
This duplicated child for (the not opened yet) bs is not the final
state, a follow-up patch will change the image probing code to use a
BlockBackend, which is completely independent of bs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
As protection against bruteforcing passphrases, the PBKDF
algorithm is tuned by counting the number of iterations
needed to produce 1 second of running time. If the machine
that the image will be used on is much faster than the
machine where the image is created, it can be desirable
to raise the number of iterations. This change adds a new
'iter-time' property that allows the user to choose the
iteration wallclock time.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemu-img info command has the ability to expose format
specific metadata about volumes. Wire up this facility for
the LUKS driver to report on cipher configuration and key
slot usage.
$ qemu-img info ~/VirtualMachines/demo.luks
image: /home/berrange/VirtualMachines/demo.luks
file format: luks
virtual size: 98M (102760448 bytes)
disk size: 100M
encrypted: yes
Format specific information:
ivgen alg: plain64
hash alg: sha1
cipher alg: aes-128
uuid: 6ddee74b-3a22-408c-8909-6789d4fa2594
cipher mode: xts
slots:
[0]:
active: true
iters: 572706
key offset: 4096
stripes: 4000
[1]:
active: false
key offset: 135168
[2]:
active: false
key offset: 266240
[3]:
active: false
key offset: 397312
[4]:
active: false
key offset: 528384
[5]:
active: false
key offset: 659456
[6]:
active: false
key offset: 790528
[7]:
active: false
key offset: 921600
payload offset: 2097152
master key iters: 142375
One somewhat undesirable artifact is that the data fields are
printed out in (apparently) random order. This will be addressed
later by changing the way the block layer pretty-prints the
image specific data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1469192015-16487-3-git-send-email-berrange@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXfMjDAAoJEDhwtADrkYZTyKwP/i5Lva3qhDk9AJhvPNSbnps/
sxVGVkUTeUM0UoXdKmDChkk2zScv2AOVxL3oibb22PmU1MvDU+XoKYokae/VucVS
WL16t/Z77QxSJ1yKhXT3i0P7+9sR9Gq2eDHchSSITLreVO8/jNb7u1JjnV4nPyQP
Scg6sCCnfgSw8W4EOz0wDhwXHbRv7obSY0lGUD1R6FifETHQ98rTpII0BS1AyvbF
HIJMcGpirAe62BGNQeJv933mrD1EgRfBytQAkEL/l6DDlz/xk9AE26bsjdP5Xa9A
MwEBje9CPm0ICleqq1ZVKNQQqng2PVfXXXdJYKQKVnIHL+REzRDKbTGTlS4njdVi
v2i4E7MwDPIf86zRUXJ6eUkWDHgld4of2WZmoxNPZmWWmHMb31iqGcb0//mYmP06
QOPd/uxpxg9pze4JeQMhzHCbFum2/s43cyqaH24lrwhTw3EsI45t4sgJQTG1NIFt
ZdPXVwNBfa6ur50dsRWHYonQimpofW94YYupWLggiVGKTzvfSWVQJGc9Ho65P23y
ZJrkbN3bWNnwVFzIbWFI5TKnE/TsnWvTPwk+9cGSP4MKf1sy6t5nIycoTiP3vC9x
PesENYYKy5ZkOkKQpC6lGwjkMl24ii3lVl5g4vWXXjtZHwGNmq/7/UJ7Dm4htqIk
B5gm5gQ/2Tul4Dihlteb
=BgpV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2016-07-06' into staging
QAPI patches for 2016-07-06
# gpg: Signature made Wed 06 Jul 2016 10:00:51 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2016-07-06:
replay: Use new QAPI cloning
sockets: Use new QAPI cloning
qapi: Add new clone visitor
qapi: Add new visit_complete() function
tests: Factor out common code in qapi output tests
tests: Clean up test-string-output-visitor
qmp-output-visitor: Favor new visit_free() function
string-output-visitor: Favor new visit_free() function
qmp-input-visitor: Favor new visit_free() function
string-input-visitor: Favor new visit_free() function
opts-visitor: Favor new visit_free() function
qapi: Add new visit_free() function
qapi: Add parameter to visit_end_*
qemu-img: Don't leak errors when outputting JSON
qapi: Improve use of qmp/types.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have a polymorphic visit_free(), we no longer need
opts_visitor_cleanup(); which in turn means we no longer need
to return a subtype from opts_visitor_new() nor a public upcast
function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-6-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rather than making the dealloc visitor track of stack of pointers
remembered during visit_start_* in order to free them during
visit_end_*, it's a lot easier to just make all callers pass the
same pointer to visit_end_*. The generated code has access to the
same pointer, while all other users are doing virtual walks and
can pass NULL. The dealloc visitor is then greatly simplified.
All three visit_end_*() functions intentionally take a void**,
even though the visit_start_*() functions differ between void**,
GenericList**, and GenericAlternate**. This is done for several
reasons: when doing a virtual walk, passing NULL doesn't care
what the type is, but when doing a generated walk, we already
have to cast the caller's specific FOO* to call visit_start,
while using void** lets us use visit_end without a cast. Also,
an upcoming patch will add a clone visitor that wants to use
the same implementation for all three visit_end callbacks,
which is made easier if all three share the same signature.
For visitors with already track per-object state (the QMP visitors
via a stack, and the string visitors which do not allow nesting),
add an assertion that the caller is indeed passing the same
pointer to paired calls.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-4-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Using int for values that are only used as booleans is confusing.
While at it, rearrange a couple of members so that all the bools
are contiguous.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=NbjJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Thu 12 May 2016 14:37:05 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (69 commits)
qemu-iotests: iotests: fail hard if not run via "check"
block: enable testing of LUKS driver with block I/O tests
block: add support for encryption secrets in block I/O tests
block: add support for --image-opts in block I/O tests
qemu-io: Add 'write -z -u' to test MAY_UNMAP flag
qemu-io: Add 'write -f' to test FUA flag
qemu-io: Allow unaligned access by default
qemu-io: Use bool for command line flags
qemu-io: Make 'open' subcommand more like command line
qemu-io: Add missing option documentation
qmp: add monitor command to add/remove a child
quorum: implement bdrv_add_child() and bdrv_del_child()
Add new block driver interface to add/delete a BDS's child
qemu-img: check block status of backing file when converting.
iotests: fix the redirection order in 083
block: Inactivate all children
block: Drop superfluous invalidating bs->file from drivers
block: Invalidate all children
nbd: Simplify client FUA handling
block: Honor BDRV_REQ_FUA during write_zeroes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have several block drivers that understand BDRV_REQ_FUA,
and emulate it in the block layer for the rest by a full flush.
But without a way to actually request BDRV_REQ_FUA during a
pass-through blk_pwrite(), FUA-aware block drivers like NBD are
forced to repeat the emulation logic of a full flush regardless
of whether the backend they are writing to could do it more
efficiently.
This patch just wires up a flags argument; followup patches
will actually make use of it in the NBD driver and in qemu-io.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As mentioned in previous patches, we want to call visit_end_struct()
functions unconditionally, so that visitors can release resources
tied up since the matching visit_start_struct() without also having
to worry about error priority if more than one error occurs.
Even though error_propagate() can be safely used to ignore a second
error during cleanup caused by a first error, it is simpler if the
cleanup cannot set an error. So, split out the error checking
portion (basically, input visitors checking for unvisited keys) into
a new function visit_check_struct(), which can be safely skipped if
any earlier errors are encountered, and leave the cleanup portion
(which never fails, but must be called unconditionally if
visit_start_struct() succeeded) in visit_end_struct().
Generated code in qapi-visit.c has diffs resembling:
|@@ -59,10 +59,12 @@ void visit_type_ACPIOSTInfo(Visitor *v,
| goto out_obj;
| }
| visit_type_ACPIOSTInfo_members(v, obj, &err);
|- error_propagate(errp, err);
|- err = NULL;
|+ if (err) {
|+ goto out_obj;
|+ }
|+ visit_check_struct(v, &err);
| out_obj:
|- visit_end_struct(v, &err);
|+ visit_end_struct(v);
| out:
and in qapi-event.c:
@@ -47,7 +47,10 @@ void qapi_event_send_acpi_device_ost(ACP
| goto out;
| }
| visit_type_q_obj_ACPI_DEVICE_OST_arg_members(v, ¶m, &err);
|- visit_end_struct(v, err ? NULL : &err);
|+ if (!err) {
|+ visit_check_struct(v, &err);
|+ }
|+ visit_end_struct(v);
| if (err) {
| goto out;
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-20-git-send-email-eblake@redhat.com>
[Conflict with a doc fixup resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit 7836857 introduced a memory leak due to invalid use of
Error vs. visit_type_end(). If visiting the intermediate
members fails, we clear the error and unconditionally use
visit_end_struct() on the same error object; but if that
cleanup succeeds, we then skip the qapi_free call.
Until a later patch adds visit_check_struct(), the only safe
approach is to use two separate error objects.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 1459526222-30052-1-git-send-email-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
All callers of blk_new_open() either don't rely on the WCE bit set after
blk_new_open() because they explicitly set it anyway, or they pass
BDRV_O_CACHE_WB unconditionally.
This patch changes blk_new_open() so that it always enables writeback
mode and asserts that BDRV_O_CACHE_WB is clear. For those callers that
used to pass BDRV_O_CACHE_WB unconditionally, the flag is removed now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Add a block driver that is capable of supporting any full disk
encryption format. This utilizes the previously added block
encryption code, and at this time supports the LUKS format.
The driver code is capable of supporting any format supported
by the QCryptoBlock module, so it registers one block driver
for each format. This patch only registers the "luks" driver
since the "qcow" driver is there only for back-compatibility
with existing qcow built-in encryption.
New LUKS compatible volumes can be formatted using qemu-img
with defaults for all settings.
$ qemu-img create --object secret,data=123456,id=sec0 \
-f luks -o key-secret=sec0 demo.luks 10G
Alternatively the cryptographic settings can be explicitly
set
$ qemu-img create --object secret,data=123456,id=sec0 \
-f luks -o key-secret=sec0,cipher-alg=aes-256,\
cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \
demo.luks 10G
And query its size
$ qemu-img info demo.img
image: demo.img
file format: luks
virtual size: 10G (10737418240 bytes)
disk size: 132K
encrypted: yes
Note that it was not necessary to provide the password
when querying info for the volume. The password is only
required when performing I/O on the volume
All volumes created by this new 'luks' driver should be
capable of being opened by the kernel dm-crypt driver.
The only algorithms listed in the LUKS spec that are
not currently supported by this impl are sha512 and
ripemd160 hashes and cast6 cipher.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
[ kwolf - Added #include to resolve conflict with da34e65c ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
