Commit Graph

149 Commits

Author SHA1 Message Date
Markus Armbruster 361ac948a5 cli qmp: Mark --preconfig, exit-preconfig experimental
Committing to the current --preconfig / exit-preconfig interface
before it has seen any use is premature.  Mark both as experimental,
the former in documentation, the latter by renaming it to
x-exit-preconfig.

See the previous commit for more detailed rationale.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180705091402.26244-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
[Straightforward conflict with commit 514337c142 resolved]
2018-07-16 15:38:19 +02:00
Peter Maydell 4fd1cbaf14 Monitor patches for 2018-07-03
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbO+iNAAoJEDhwtADrkYZTX9gQAJFT0DPtUYQsqbYAhrUIJo/a
 lT5OAnMnMou6Qu0XHjSYrqdZu7Ega00rvyeYgtB54lmLcOVrjAxF0SwcPcoOuz7K
 O9o00ZmwuFPUugJuYBLDRqJryejbZTCGSOg3cp+YlV6naW6Omck97iu7G/MZWLvB
 FJvIIUaPIAGklRhSodhC+yePp1PNbfGVcpDjAxn4e1UQ/2M6gwSFx9iPbNl2WotN
 CXjRHmkB4ZcxwcDtzzFLwkXTDkryZE27sOgFjDG5xFWO/oCS+Px7a0vME8YM+j2r
 eNa93g16ZohNqHb9t6GarlqrqNqbQF2t6JAPpmlIX5qb3Dtb87MQ/ExdN+FJ4btD
 IfBkTnXbs7qkZpConRlrhdd2J01ChnCdcmddUeenlq+8mIMjQJXH2RCwRVKyoZYs
 4Z74XWy2A+xMJgjqY9WO7E4jy4QVDSckKIm6je/O8fXzXWxthi4H1/2EN5nAv1hY
 zNxP/SW0vpqiR/cVQAr2N6VGz2/m9cWQIf0NwFc765gypPBbCL5HLrb+/xC86Bi3
 ylg9YlTw84oXtpSauTYu3oE989iDndu/s9BEUe5fW5g+8azs+h5SHVTwq0Y8dzSZ
 n2FsGxr76BlOIu5i1oIYNUUhAoU3txddueT4SNHE5Iaz1x6fAKnMP2hxoo5DWDzn
 1Rzgq4ATB8H+V6Og942n
 =/2SW
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2018-07-03-v2' into staging

Monitor patches for 2018-07-03

# gpg: Signature made Tue 03 Jul 2018 22:20:13 BST
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-monitor-2018-07-03-v2: (32 commits)
  qapi: Polish command flags documentation in qapi-code-gen.txt
  monitor: Improve some comments
  qmp: Clean up capability negotiation after commit 02130314d8
  qobject: Let qobject_from_jsonf() fail instead of abort
  qmp: Switch timestamp_put() to qdict_from_jsonf_nofail()
  qmp: Add some comments around null responses
  qmp: Simplify monitor_qmp_respond()
  qmp: Replace get_qmp_greeting() by qmp_greeting()
  qmp: Replace monitor_json_emitter{,raw}() by qmp_{queue,send}_response()
  qmp: Use QDict * instead of QObject * for response objects
  qmp: De-duplicate error response building
  qobject: New qdict_from_jsonf_nofail()
  monitor: Peel off @mon_global wrapper
  monitor: Rename use_io_thr to use_io_thread
  qmp: Don't let JSON errors jump the queue
  qmp: Don't let malformed in-band commands jump the queue
  tests/qmp-test: Demonstrate QMP errors jumping the queue
  qmp: Simplify code around monitor_qmp_dispatch_one()
  qmp: Always free QMPRequest with qmp_request_free()
  qmp: Revert change to handle_qmp_command tracepoint
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-05 11:25:14 +01:00
Markus Armbruster 97ca0712c8 qmp: Get rid of x-oob-test command
tests/qmp-test tests an out-of-band command overtaking a slow in-band
command.  To do that, it needs:

1. An in-band command that *reliably* takes long enough to be
   overtaken.

2. An out-of-band command to do the overtaking.

3. To avoid delays, a way to make the in-band command complete quickly
   after it was overtaken.

To satisfy these needs, commit 469638f9cb provides the rather
peculiar oob-capable QMP command x-oob-test:

* With "lock": true, it waits for a global semaphore.

* With "lock": false, it signals the global semaphore.

To satisfy 1., the test runs x-oob-test in-band with "lock": true.
To satisfy 2. and 3., it runs x-oob-test out-of-band with "lock": false.

Note that waiting for a semaphore violates the rules for oob-capable
commands.  Running x-oob-test with "lock": true hangs the monitor
until you run x-oob-test with "lock": false on another monitor (which
you might not have set up).

Having an externally visible QMP command that may hang the monitor is
not nice.  Let's apply a little more ingenuity to the problem.  Idea:
have an existing command block on reading a FIFO special file, unblock
it by opening the FIFO for writing.

For 1., use

    {"execute": "blockdev-add",  "id": ID1,
     "arguments": {
        "driver": "blkdebug", "node-name": ID1, "config": FIFO,
        "image": { "driver": "null-co"}}}

where ID1 is an arbitrary string, and FIFO is the name of the FIFO.

For 2., use

    {"execute": "migrate-pause", "id": ID2, "control": {"run-oob": true}}

where ID2 is a different arbitrary string.  Since there's no migration
to pause, the command will fail, but that's fine; instant failure is
still a test of out-of-band responses overtaking in-band commands.

For 3., open FIFO for writing.

Drop QMP command x-oob-test.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-6-armbru@redhat.com>
[Error checking tweaked]
2018-07-03 23:15:43 +02:00
Marc-André Lureau 514337c142 qapi: add conditions to SPICE type/commands/events on the schema
Add #if defined(CONFIG_SPICE) in generated code, and adjust the
qmp/hmp code accordingly.

query-qmp-schema no longer reports the command/events etc as
available when disabled at compile time.

Commands made conditional:

* query-spice

  Before the patch, the command for !CONFIG_SPICE is unregistered. It
  will fail with the same error.

Events made conditional:

* SPICE_CONNECTED, SPICE_INITIALIZED, SPICE_DISCONNECTED,
  SPICE_MIGRATE_COMPLETED

Add TODO for conditional SPICE chardevs, delayed until the supports
for conditional members lands.

No HMP change, the code was already conditional.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-15-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03 18:38:54 +02:00
Marc-André Lureau 05eb4a25ae qapi: add conditions to VNC type/commands/events on the schema
Add #if defined(CONFIG_VNC) in generated code, and adjust the
qmp/hmp code accordingly.

query-qmp-schema no longer reports the command/events etc as
available when disabled at compile.

Commands made conditional:

* query-vnc, query-vnc-servers, change-vnc-password

  Before the patch, the commands for !CONFIG_VNC are stubs that fail
  like this:

    {"error": {"class": "GenericError",
               "desc": "The feature 'vnc' is not enabled"}}

  Afterwards, they fail like this:

    {"error": {"class": "CommandNotFound",
               "desc": "The command FOO has not been found"}}

  I call that an improvement, because it lets clients distinguish
  between command unavailable (class CommandNotFound) and command failed
  (class GenericError).

Events made conditional:

* VNC_CONNECTED, VNC_INITIALIZED, VNC_DISCONNECTED

HMP change:

* info vnc

  Will return "unknown command: 'info vnc'" when VNC is compiled
  out (same as error for spice when --disable-spice)

Occurrences of VNC (case insensitive) in the schema that aren't
covered by this change:

* add_client

  Command has other uses, including "socket bases character devices".
  These are unconditional as far as I can tell.

* set_password, expire_password

  In theory, these commands could be used for managing any service's
  password.  In practice, they're used for VNC and SPICE services.
  They're documented for "remote display session" / "remote display
  server".

  The service is selected by argument @protocol.  The code special-cases
  protocol-specific argument checking, then calls a protocol-specific
  function to do the work.  If it fails, the command fails with "Could
  not set password".  It does when the service isn't compiled in (it's a
  stub then).

  We could make these commands conditional on the conjunction of all
  services [currently: defined(CONFIG_VNC) || defined(CONFIG_SPICE)],
  but I doubt it's worthwhile.

* change

  Command has other uses, namely changing media.
  This patch inlines a stub; no functional change.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180703155648.11933-14-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-07-03 18:38:54 +02:00
Igor Mammedov 047f7038f5 cli: add --preconfig option
This option allows pausing QEMU in the new RUN_STATE_PRECONFIG state,
allowing the configuration of QEMU from QMP before the machine jumps
into board initialization code of machine_run_board_init()

The intent is to allow management to query machine state and additionally
configure it using previous query results within one QEMU instance
(i.e. eliminate the need to start QEMU twice, 1st to query board specific
parameters and 2nd for actual VM start using query results for
additional parameters).

The new option complements -S option and could be used with or without
it. The difference is that -S pauses QEMU when the machine is completely
initialized with all devices wired up and ready to execute guest code
(QEMU needs only to unpause VCPUs to let guest execute its code),
while the "preconfig" option pauses QEMU early before board specific init
callback (machine_run_board_init) is executed and allows the configuration
of machine parameters which will be used by board init code.

When early introspection/configuration is done, command 'exit-preconfig'
should be used to exit RUN_STATE_PRECONFIG and transition to the next
requested state (i.e. if -S is used then QEMU will pause the second
time when board/device initialization is completed or start guest
execution if -S isn't provided on CLI)

PS:
Initially 'preconfig' is planned to be used for configuring numa
topology depending on board specified possible cpus layout.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1526059483-42847-1-git-send-email-imammedo@redhat.com>
[ehabkost: Changed "since 2.13" to "since 3.0"]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-05-30 13:19:14 -03:00
David Hildenbrand 2cc0e2e814 pc-dimm: factor out MemoryDevice interface
On the qmp level, we already have the concept of memory devices:
    "query-memory-devices"
Right now, we only support NVDIMM and PCDIMM.

We want to map other devices later into the address space of the guest.
Such device could e.g. be virtio devices. These devices will have a
guest memory range assigned but won't be exposed via e.g. ACPI. We want
to make them look like memory device, but not glued to pc-dimm.

Especially, it will not always be possible to have TYPE_PC_DIMM as a parent
class (e.g. virtio devices). Let's use an interface instead. As a first
part, convert handling of
- qmp_pc_dimm_device_list
- get_plugged_memory_size
to our new model. plug/unplug stuff etc. will follow later.

A memory device will have to provide the following functions:
- get_addr(): Necessary, as the property "addr" can e.g. not be used for
              virtio devices (already defined).
- get_plugged_size(): The amount this device offers to the guest as of
                      now.
- get_region_size(): Because this can later on be bigger than the
                     plugged size.
- fill_device_info(): Fill MemoryDeviceInfo, e.g. for qmp.

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180423165126.15441-2-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-05-07 10:00:02 -03:00
Marc-André Lureau cb3e7f08ae qobject: Replace qobject_incref/QINCREF qobject_decref/QDECREF
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.

The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked().  Unlike
qobject_decref(), qobject_unref() doesn't accept void *.

Note that the new macros evaluate their argument exactly once, thus no
need to shout them.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-05-04 08:27:53 +02:00
Peter Maydell ed627b2ad3 virtio,vhost,pci,pc: features, cleanups
SRAT tables for DIMM devices
 new virtio net flags for speed/duplex
 post-copy migration support in vhost
 cleanups in pci
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJasR1rAAoJECgfDbjSjVRpOocH/R9A3g/TkpGjmLzJBrrX1NGO
 I/iq0ttHjqg4OBIChA4BHHjXwYUMs7XQn26B3efrk1otLAJhuqntZIIo3uU0WraA
 5J+4DT46ogs5rZWNzDCZ0zAkSaATDA6h9Nfh7TvPc9Q2WpcIT0cTa/jOtrxRc9Vq
 32hbUKtJSpNxRjwbZvk6YV21HtWo3Tktdaj9IeTQTN0/gfMyOMdgxta3+bymicbJ
 FuF9ybHcpXvrEctHhXHIL4/YVGEH/4shagZ4JVzv1dVdLeHLZtPomdf7+oc0+07m
 Qs+yV0HeRS5Zxt7w5blGLC4zDXczT/bUx8oln0Tz5MV7RR/+C2HwMOHC69gfpSc=
 =vomK
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,vhost,pci,pc: features, cleanups

SRAT tables for DIMM devices
new virtio net flags for speed/duplex
post-copy migration support in vhost
cleanups in pci

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 20 Mar 2018 14:40:43 GMT
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (51 commits)
  postcopy shared docs
  libvhost-user: Claim support for postcopy
  postcopy: Allow shared memory
  vhost: Huge page align and merge
  vhost+postcopy: Wire up POSTCOPY_END notify
  vhost-user: Add VHOST_USER_POSTCOPY_END message
  libvhost-user: mprotect & madvises for postcopy
  vhost+postcopy: Call wakeups
  vhost+postcopy: Add vhost waker
  postcopy: postcopy_notify_shared_wake
  postcopy: helper for waking shared
  vhost+postcopy: Resolve client address
  postcopy-ram: add a stub for postcopy_request_shared_page
  vhost+postcopy: Helper to send requests to source for shared pages
  vhost+postcopy: Stash RAMBlock and offset
  vhost+postcopy: Send address back to qemu
  libvhost-user+postcopy: Register new regions with the ufd
  migration/ram: ramblock_recv_bitmap_test_byte_offset
  postcopy+vhost-user: Split set_mem_table for postcopy
  vhost+postcopy: Transmit 'listen' to slave
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	scripts/update-linux-headers.sh
2018-03-20 15:48:34 +00:00
Haozhong Zhang 52c95cae4e pc-dimm: make qmp_pc_dimm_device_list() sort devices by address
Make qmp_pc_dimm_device_list() return sorted by start address
list of devices so that it could be reused in places that
would need sorted list*. Reuse existing pc_dimm_built_list()
to get sorted list.

While at it hide recursive callbacks from callers, so that:

  qmp_pc_dimm_device_list(qdev_get_machine(), &list);

could be replaced with simpler:

  list = qmp_pc_dimm_device_list();

* follow up patch will use it in build_srat()

Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> for ppc part
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20 03:34:52 +02:00
Peter Xu 469638f9cb qmp: add command "x-oob-test"
This command is only used to test OOB functionality.  It should not be
used for any other purposes.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-22-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-19 14:58:37 -05:00
Max Reitz 7dc847ebba qapi: Replace qobject_to_X(o) by qobject_to(X, o)
This patch was generated using the following Coccinelle script:

@@
expression Obj;
@@
(
- qobject_to_qnum(Obj)
+ qobject_to(QNum, Obj)
|
- qobject_to_qstring(Obj)
+ qobject_to(QString, Obj)
|
- qobject_to_qdict(Obj)
+ qobject_to(QDict, Obj)
|
- qobject_to_qlist(Obj)
+ qobject_to(QList, Obj)
|
- qobject_to_qbool(Obj)
+ qobject_to(QBool, Obj)
)

and a bit of manual fix-up for overly long lines and three places in
tests/check-qjson.c that Coccinelle did not find.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: swap order from qobject_to(o, X), rebase to master, also a fix
to latent false-positive compiler complaint about hw/i386/acpi-build.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-19 14:58:36 -05:00
Alexey Kardashevskiy 961c47bb8b qmp: Add qom-list-properties to list QOM object properties
There is already 'device-list-properties' which does most of the job,
however it does not handle everything returned by qom-list-types such
as machines as they inherit directly from TYPE_OBJECT and not TYPE_DEVICE.
It does not handle abstract classes either.

This adds a new qom-list-properties command which prints properties
of a specific class and its instance. It is pretty much a simplified copy
of the device-list-properties handler.

Since it creates an object instance, device properties should appear
in the output as they are copied to QOM properties at the instance_init
hook.

This adds a object_class_property_iter_init() helper to allow class
properties enumeration uses it in the new QMP command to allow properties
listing for abstract classes.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20180301130939.15875-3-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-06 14:01:26 +01:00
Alexey Kardashevskiy 35f63767dc qmp: Merge ObjectPropertyInfo and DevicePropertyInfo
ObjectPropertyInfo is more generic and only missing @description.
This adds a description to ObjectPropertyInfo and removes
DevicePropertyInfo so the resulting ObjectPropertyInfo can be used
elsewhere.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20180301130939.15875-2-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-06 14:01:26 +01:00
Markus Armbruster 1ef1cee7db Fix up dangling references to qmp-commands.* in comment and doc
Fix up the reference to qmp-commands.hx in qmp.c.  Missed in commit
5032a16d1d.

Fix up the reference to qmp-commands.txt in
docs/xen-save-devices-state.txt.  Missed in commit 4d8bb958fa.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-29-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02 13:48:26 -06:00
Markus Armbruster 112ed241f5 qapi: Empty out qapi-schema.json
The previous commit improved compile time by including less of the
generated QAPI headers.  This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.

Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.

It's possible everywhere, except:

* monitor.c needs qmp-command.h to get qmp_init_marshal()

* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
  qapi-event.h to get enum QAPIEvent

Perhaps we'll get rid of those some other day.

Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02 13:45:50 -06:00
Markus Armbruster 922a01a013 Move include qemu/option.h from qemu-common.h to actual users
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter.  Drop the include, and add it
to the places that actually need it.

While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.

This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09 13:52:16 +01:00
Markus Armbruster 452fcdbc49 Include qapi/qmp/qdict.h exactly where needed
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.

While there, separate #include from file comment with a blank line.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster 5ee9d2fe9e Include qapi/qmp/qobject.h exactly where needed
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-11-armbru@redhat.com>
2018-02-09 13:52:15 +01:00
Markus Armbruster e688df6bc4 Include qapi/error.h exactly where needed
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.

While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-09 13:50:17 +01:00
Daniel Henrique Barboza 49ccefde30 qmp: remove qmp_cpu
'qmp_cpu' was implemented in commit 755f196898 ("qapi: Convert the cpu
command") as a functional no-op, a QMP call that does nothing and
return success. The idea, apparently, was to provide a counterpart
for the HMP 'hmp_cpu' command, introduced in the same commit.

After 6 years of its creation, qmp_cpu remains a functional no-op
that does nothing, having no value for any caller/user. A proposal
was sent to implement qmp_cpu like hmp_cpu works, but it was denied
[1]. The reason is that QMP must be as stateless as possible and a
function that changes its state (the current CPU monitor in the case
of qmp_cpu) goes against it. Any QMP command that needs a specific
monitor CPU setup must provide it in its arguments, instead of relying
in the current QMP monitor state.

After discussions that happened in [2] it was decided that a command
that does nothing since its birth, no one uses for anything and will
not be implemented, should be deprecated and erased. Given that we will
*not* provide any replacement for qmp_cpu and we believe that there
is no user relying on it, there is no point in adding a deprecation
delay for it.

So, this patch nukes qmp_cpu from QEMU code, removing both its blank
implementation in qmp.c and its doc in qapi-schema.json.

[1] https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg02283.html
[2] https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg03696.html

Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20171220102304.8288-1-danielhb@linux.vnet.ibm.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-12-20 19:18:33 +01:00
Vadim Galitsyn 9aa3397f19 qmp: introduce query-memory-size-summary command
Add a new query-memory-size-summary command which provides the
following memory information in bytes:

  * base-memory - size of "base" memory specified with command line option -m.

  * plugged-memory - amount of memory that was hot-plugged.
    If target does not have CONFIG_MEM_HOTPLUG enabled, no
    value is reported.

Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Mohammed Gamal <mohammed.gamal@profitbricks.com>
Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com>
Reviewed-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: qemu-devel@nongnu.org
Message-Id: <20170829153022.27004-3-vadim.galitsyn@profitbricks.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Fixup comments as per Igor's review
  Added 'of' from Vadim's reply
2017-09-14 15:52:10 +01:00
Eduardo Habkost f86285c571 qmp: Include parent type on 'qom-list-types' output
Include name of parent type of each type on 'qom-list-types' output.

Without this, there's no way to figure out the parents of a given type
without making additional 'qom-list-types' queries.

In addition to the test case for the new feature, update the
abstract-interface test case to use the new field and avoid the
"qom-list-types implements=object" trick.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170707122215.8819-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-07-17 15:41:30 -03:00
Eduardo Habkost 87467eae37 qmp: Include 'abstract' field on 'qom-list-types' output
A client may be interested in getting the list of both abstract and
non-abstract types.  Instead of requiring them to make multiple queries
with different filter arguments, just return an 'abstract' field in
'qom-list-types'.

In addition to the new test code for validating this field, update the
abstract-interfaces test case to query for all 'interface' subtypes
(including abstract ones), and to look at the 'abstract' field directly.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170707122215.8819-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-07-17 15:41:30 -03:00
Fam Zheng 75ab905383 qmp: Use ObjectProperty.type if present
The dynamic value is more informative in the case of link property,
otherwise it is the same.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-5-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14 12:04:42 +02:00
Fam Zheng faabdbb792 qdev: Introduce PropertyInfo.create
This allows property implementation to provide a specialized property
creation method.

Update conditions guarding property types accordingly.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-3-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14 12:04:42 +02:00
Daniel P. Berrange 788cf9f8c8 block: rip out all traces of password prompting
Now that qcow & qcow2 are wired up to get encryption keys
via the QCryptoSecret object, nothing is relying on the
interactive prompting for passwords. All the code related
to password prompting can thus be ripped out.

Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-17-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:44:56 +02:00
Marc-André Lureau 8228e353d8 chardev: move headers to include/chardev
So they are all in one place. The following patch will move serial &
parallel declarations to the respective headers.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-02 11:33:52 +04:00
Eric Blake cf83f14005 shutdown: Add source information to SHUTDOWN and RESET
Time to wire up all the call sites that request a shutdown or
reset to use the enum added in the previous patch.

It would have been less churn to keep the common case with no
arguments as meaning guest-triggered, and only modified the
host-triggered code paths, via a wrapper function, but then we'd
still have to audit that I didn't miss any host-triggered spots;
changing the signature forces us to double-check that I correctly
categorized all callers.

Since command line options can change whether a guest reset request
causes an actual reset vs. a shutdown, it's easy to also add the
information to reset requests.

Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts]
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts]
Message-Id: <20170515214114.15442-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-23 13:28:17 +02:00
Kevin Wolf 4417ab7adf block: New BdrvChildRole.activate() for blk_resume_after_migration()
Instead of manually calling blk_resume_after_migration() in migration
code after doing bdrv_invalidate_cache_all(), integrate the BlockBackend
activation with cache invalidation into a single function. This is
achieved with a new callback in BdrvChildRole that is called by
bdrv_invalidate_cache_all().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2017-05-11 12:08:24 +02:00
Kevin Wolf ace21a5875 migration: Unify block node activation error handling
Migration code activates all block driver nodes on the destination when
the migration completes. It does so by calling
bdrv_invalidate_cache_all() and blk_resume_after_migration(). There is
one code path for precopy and one for postcopy migration, resulting in
four function calls, which used to have three different failure modes.

This patch unifies the behaviour so that failure to activate all block
nodes is non-fatal, but the error message is logged and the VM isn't
automatically started. 'cont' will retry activating the block nodes.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2017-05-11 12:08:24 +02:00
Laurent Vivier 08f00df4f4 qdev: remove cannot_destroy_with_object_finalize_yet
As all users have been removed, we can remove
cannot_destroy_with_object_finalize_yet field
from the DeviceClass structure.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170414083717.13641-5-lvivier@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-21 07:18:34 +02:00
Kevin Wolf d35ff5e6b3 block: Ignore guest dev permissions during incoming migration
Usually guest devices don't like other writers to the same image, so
they use blk_set_perm() to prevent this from happening. In the migration
phase before the VM is actually running, though, they don't have a
problem with writes to the image. On the other hand, storage migration
needs to be able to write to the image in this phase, so the restrictive
blk_set_perm() call of qdev devices breaks it.

This patch flags all BlockBackends with a qdev device as
blk->disable_perm during incoming migration, which means that the
requested permissions are stored in the BlockBackend, but not actually
applied to its root node yet.

Once migration has finished and the VM should be resumed, the
permissions are applied. If they cannot be applied (e.g. because the NBD
server used for block migration hasn't been shut down), resuming the VM
fails.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
2017-04-07 14:44:05 +02:00
Markus Armbruster 048abb7b20 qapi: Drop unused non-strict qobject input visitor
The split between tests/test-qobject-input-visitor.c and
tests/test-qobject-input-strict.c now makes less sense than ever.  The
next commit will take care of that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-20-git-send-email-armbru@redhat.com>
2017-03-05 09:14:19 +01:00
Marc-André Lureau 213dcb060f char: headers clean-up
Those could probably be squashed with earlier patches, however I
couldn't easily identify them, test them or check if there are still
necessary on various platforms.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2017-01-31 23:31:22 +04:00
Marc-André Lureau 0ec7b3e7f2 char: rename CharDriverState Chardev
Pick a uniform chardev type name.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27 18:07:59 +01:00
Lin Ma 7a8c153f0e qmp: Fix argument name in error message of device-list-properties
The argument is called "typename", not "name".

[Thanks to Markus for correcting the commit message]

Signed-off-by: Lin Ma <lma@suse.com>
Message-Id: <20170125052703.23571-1-lma@suse.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-01-27 08:23:06 +01:00
Anand J 814bb12a56 clean-up: removed duplicate #includes
Some files contain multiple #includes of the same header file.
Removed most of those unnecessary duplicate entries using
scripts/clean-includes.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Anand J <anand.indukala@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-10-28 18:17:24 +03:00
Daniel P. Berrange 09e68369a8 qapi: rename QmpInputVisitor to QObjectInputVisitor
The QmpInputVisitor has no direct dependency on QMP. It is
valid to use it anywhere that one has a QObject. Rename it
to better reflect its functionality as a generic QObject
to QAPI converter.

The previous commit renamed the files, this one renames C identifiers.

Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1475246744-29302-5-git-send-email-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Straightforwardly rebased, split into file and identifier rename]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-25 16:25:54 +02:00
Daniel P. Berrange b3db211f3c qapi: rename *qmp-*-visitor* to *qobject-*-visitor*
The QMP visitors have no direct dependency on QMP. It is
valid to use them anywhere that one has a QObject. Rename them
to better reflect their functionality as a generic QObject
to QAPI converter.

This is the first of three parts: rename the files.  The next two
parts will rename C identifiers.  The split is necessary to make git
rename detection work.

Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Split into file and identifier rename, two comments touched up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-25 16:25:48 +02:00
Marc-André Lureau e64c75a975 qmp: fix object-add assert() without props
Since commit ad739706bb, user_creatable_add_type() expects to be
given a qdict. However, if object-add is called without props, you reach
the assert: "qemu/qom/object_interfaces.c:115: user_creatable_add_type:
Assertion `qdict' failed.", because the qdict isn't created in this
case (it's optional).

Furthermore, qmp_input_visitor_new() is not meant to be called without a
dict, and a further commit will assert in this situation.

If none given, create an empty qdict in qmp to avoid the
user_creatable_add_type() assert(qdict).

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20160922203927.28241-2-marcandre.lureau@redhat.com>
Tested-by: Xiao Long Jiang <zxiaol@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-10-06 14:47:41 +02:00
Peter Maydell 3b71ec8516 Block layer patches
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJX5RkyAAoJEH8JsnLIjy/WMnYP/i03Ii6nt8VY2PMX10NK3z+H
 5QskSnGzBgQg0OVFPQkvV1nW8bXPN07n/L2Q0H9FzQXTUzCbAkQC4MkzBZTMgaUp
 63XVRG151+AjqctvIncWQktUgMg6ywKBCug8G6gwMQ1BVsLerUJmE2tM0JGZF6WL
 q+F6uTtVMLNKR6miaTsJtFJA+ts9gGEecGNITRByEWbtD7ESF8TOXhCfpV/Ni45s
 5pMVOQT0o9jwgjekrUbJ9PrlxGSLfe/bi3ypqy6boe8EXQS6DImAiDKWkTQjGj2P
 cGlZ0oxWHq0g/15sgZOzqDtOXqE02+RK9C1UcASgObfdUos6gFpi6G7cAffzP9aq
 wzhi8u8Beth2WZP8tLLAJtoQjJhcjutWSw60HPhEcHZNkkaZF3KMXGDk8j1xp5EN
 8VVkWVZr+1ZOP+HsHCNrpvag+IP49DJ5j50W+oVqSKSzG37AC6SxNo3PEsg1urAi
 m5APFJbCgxMfDSnb8yw6ClBIe1IH624VMoELVzY1C9AqOnTxfJ08o4MbE8t1DEoa
 dQV/R3Mrqt3W+YflWNPXzVhRxD/mZW+RXPlBARYvFzHW12fh1PcwFWrB+ivdqu+4
 x0VvmZebJcEP+CxmRQOat80Zhos1Hs+ZyxUHyA5a0+Nt3YhK7k3sr4CQXxr5MIHA
 1c/D8znmWf9VksmW33U5
 =JG9f
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

# gpg: Signature made Fri 23 Sep 2016 12:59:46 BST
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (33 commits)
  block: Remove BB interface from blockdev-add/del
  qemu-iotests/141: Avoid blockdev-add with id
  block: Avoid printing NULL string in error messages
  qemu-iotests/139: Avoid blockdev-add with id
  qemu-iotests/124: Avoid blockdev-add with id
  qemu-iotests/118: Avoid blockdev-add with id
  qemu-iotests/117: Avoid blockdev-add with id
  qemu-iotests/087: Avoid blockdev-add with id
  qemu-iotests/081: Avoid blockdev-add with id
  qemu-iotests/071: Avoid blockdev-add with id
  qemu-iotests/067: Avoid blockdev-add with id
  qemu-iotests/041: Avoid blockdev-add with id
  qemu-iotests/118: Test media change with qdev name
  block: Accept device model name for block_set_io_throttle
  block: Accept device model name for blockdev-change-medium
  block: Accept device model name for eject
  block: Accept device model name for x-blockdev-remove-medium
  block: Accept device model name for x-blockdev-insert-medium
  block: Accept device model name for blockdev-open/close-tray
  qdev-monitor: Add blk_by_qdev_id()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-23 16:15:33 +01:00
Kevin Wolf 70e2cb3bd7 block: Accept device model name for blockdev-change-medium
In order to remove the need for BlockBackend names in the external API,
we want to allow qdev device names in all device related commands.

This converts blockdev-change-medium to accept a qdev device name.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-23 13:44:47 +02:00
Fam Zheng 9c5ce8db2e vl: Switch qemu_uuid to QemuUUID
Update all qemu_uuid users as well, especially get rid of the duplicated
low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API.

Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to
QemuUUID is done here too to keep everything in sync and avoid code
churn.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>
2016-09-23 11:42:52 +08:00
Fam Zheng cea25275a3 util: Add UUID API
A number of different places across the code base use CONFIG_UUID. Some
of them are soft dependency, some are not built if libuuid is not
available, some come with dummy fallback, some throws runtime error.

It is hard to maintain, and hard to reason for users.

Since UUID is a simple standard with only a small number of operations,
it is cleaner to have a central support in libqemuutil. This patch adds
qemu_uuid_* functions that all uuid users in the code base can
rely on. Except for qemu_uuid_generate which is new code, all other
functions are just copy from existing fallbacks from other files.

Note that qemu_uuid_parse is moved without updating the function
signature to use QemuUUID, to keep this patch simple.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-2-git-send-email-famz@redhat.com>
2016-09-23 11:42:52 +08:00
Marc-André Lureau 3688d8c717 build-sys: define QEMU_VERSION_{MAJOR, MINOR, MICRO}
There are better chances to find what went wrong at build time than a
later assert in qmp_query_version

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160912091913.15831-2-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-09-19 17:32:21 +02:00
David Hildenbrand b18b604334 qmp: add QMP interface "query-cpu-model-baseline"
Let's provide a standardized interface to baseline two CPU models, to
create a third, compatible one. This is especially helpful when two
CPU models are not identical, but a CPU model is required that is
guaranteed to run under both configurations, where the original models run.

"query-cpu-model-baseline" takes two CPU models and returns a third,
compatible model. The result will always be a static CPU model.

Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-28-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06 17:06:51 +02:00
David Hildenbrand 0031e0d683 qmp: add QMP interface "query-cpu-model-comparison"
Let's provide a standardized interface to compare two CPU models.
"query-cpu-model-compare" takes two models and returns  how they compare
in a specific configuration.

The result will give guarantees about runnability. E.g. if a CPU model A
is a subset of CPU model B, model A is guaranteed to run in configurations
where model B runs, but not the other way around (might or might not run).

Usually, CPU features or CPU generations are used to calculate the result.
If a model is not guaranteed to run in a certain environment (e.g.
incompatible), a  compatible one can be created by "baselining" both models
(follow up patch).

Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-27-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06 17:06:51 +02:00
David Hildenbrand e09484efbc qmp: add QMP interface "query-cpu-model-expansion"
Let's provide a standardized interface to expand CPU models. This interface
can be used by tooling to get details about a specific CPU model in a
certain configuration, e.g. about the "host" model.

To take care of all architectures, two detail levels for an expansion
are introduced. Certain architectures might not support all detail levels.
While "full" will expand and indicate all relevant properties/features
of a CPU model, "static" expands to a static base CPU model, that will
never change between QEMU versions and therefore have the same features
when used under different compatibility machines.

Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-26-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06 17:06:51 +02:00
Eric Blake b70ce1018a qmp-input-visitor: Favor new visit_free() function
Now that we have a polymorphic visit_free(), we no longer need
qmp_input_visitor_cleanup(); which in turn means we no longer
need to return a subtype from qmp_input_visitor_new() nor a
public upcast function.

Generated code changes to qmp-marshal.c look like:

|@@ -52,11 +52,10 @@ void qmp_marshal_add_fd(QDict *args, QOb
| {
|     Error *err = NULL;
|     AddfdInfo *retval;
|-    QmpInputVisitor *qiv = qmp_input_visitor_new(QOBJECT(args), true);
|     Visitor *v;
|     q_obj_add_fd_arg arg = {0};
|
|-    v = qmp_input_get_visitor(qiv);
|+    v = qmp_input_visitor_new(QOBJECT(args), true);
|     visit_start_struct(v, NULL, NULL, 0, &err);
|     if (err) {
|         goto out;

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-8-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06 10:52:04 +02:00