Commit Graph

1523 Commits

Author SHA1 Message Date
Daniel P. Berrange 9024603776 configure: avoid polluting global CFLAGS with tasn1 flags
The previous commit

  commit 9a2fd4347c
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Mon Apr 13 14:01:39 2015 +0100

    crypto: add sanity checking of TLS x509 credentials

defined new variables $TEST_LIBS and $TEST_CFLAGS and
used them in tests/Makefile to augment $LIBS and $CFLAGS.

Unfortunately this overlooks the fact that tests/Makefile
is not executed via recursive-make, it is just pulled into
the top level Makefile via an include statement. So rather
than just augmenting the compiler/linker flags for tests
it polluted the global flags.

This is thought to be behind a reported failure when
building the pixman module as a sub-module, since global
$CFLAGS are passed down to configure in pixman.

This change removes the $TEST_LIBS and $TEST_CFLAGS
replacing them with $TASN1_LIBS and $TASN1_CFLAGS,
setting only against specific objects/executables
that need them.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-22 19:03:08 +01:00
Daniel P. Berrange 91bfcdb01d crypto: allow use of nettle/gcrypt to be selected explicitly
Currently the choice of whether to use nettle or gcrypt is
made based on what gnutls is linked to. There are times
when it is desirable to be able to force build against a
specific library. For example, if testing changes to QEMU's
crypto code all 3 possible backends need to be checked
regardless of what the local gnutls uses.

It is also desirable to be able to enable nettle/gcrypt
for cipher/hash algorithms, without enabling gnutls
for TLS support.

This gives two new configure flags, which allow the
following possibilities

Automatically determine nettle vs gcrypt from what
gnutls links to (recommended to minimize number of
crypto libraries linked to)

 ./configure

Automatically determine nettle vs gcrypt based on
which is installed

 ./configure --disable-gnutls

Force use of nettle

 ./configure --enable-nettle

Force use of gcrypt

 ./configure --enable-gcrypt

Force use of built-in AES & crippled-DES

 ./configure --disable-nettle --disable-gcrypt

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-22 19:03:07 +01:00
Peter Maydell ca3e40e233 vhost, pc, virtio features, fixes, cleanups
New features:
     VT-d support for devices behind a bridge
     vhost-user migration support
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWKMrnAAoJECgfDbjSjVRpVL0H/iRc31o00QE4nWBRpxUpf8WJ
 V5RWE8qKkDgBha5bS5Nt4vs8K4jkkHGXCbmygMidWph96hUPK8/yHy1A/wmpBibB
 5hVSPDK8onavNGJwpaWDrkhd9OhKAaKOuu49T6+VWJGZY/uX5ayqmcN934y0NPUa
 4EhH5tyxPpYOYeW9i/VOMQ374gCJcpzYBMug4NJZRyFpfz/b2mzAQtoqw3EsPtB0
 vpVJ+fKiCyG39HFKQJW7cL12yBeXOoyhjfDxpumLqwLWMfmde+vJwTFx6wbechgV
 aU3jIdvUX8wHCNYaB937NsMaDALoGNqUjbpKnf+xD1w7xr9pwTzdyrGH3rpGLEE=
 =+G1+
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

vhost, pc, virtio features, fixes, cleanups

New features:
    VT-d support for devices behind a bridge
    vhost-user migration support

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 22 Oct 2015 12:39:19 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream: (37 commits)
  hw/isa/lpc_ich9: inject the SMI on the VCPU that is writing to APM_CNT
  i386: keep cpu_model field in MachineState uptodate
  vhost: set the correct queue index in case of migration with multiqueue
  piix: fix resource leak reported by Coverity
  seccomp: add memfd_create to whitelist
  vhost-user-test: check ownership during migration
  vhost-user-test: add live-migration test
  vhost-user-test: learn to tweak various qemu arguments
  vhost-user-test: wrap server in TestServer struct
  vhost-user-test: remove useless static check
  vhost-user-test: move wait_for_fds() out
  vhost: add migration block if memfd failed
  vhost-user: use an enum helper for features mask
  vhost user: add rarp sending after live migration for legacy guest
  vhost user: add support of live migration
  net: add trace_vhost_user_event
  vhost-user: document migration log
  vhost: use a function for each call
  vhost-user: add a migration blocker
  vhost-user: send log shm fd along with log_base
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-22 12:41:44 +01:00
Marc-André Lureau 751bcc3981 configure: probe for memfd
Check if memfd_create() is part of system libc.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
2015-10-22 14:34:48 +03:00
Michael Roth fafcaf1d74 build: qemu-ga: add 'qemu-ga' build target for w32
Currently POSIX builds rely on 'qemu-ga' target to do qga-only
distributable build. On w32, as with most standalone binary targets,
we rely on 'qemu-ga.exe' target.

Unlike with POSIX, qemu-ga for w32 has a number of related targets
such as VSS DLL and MSI package. We can do the full distributable
qga-only build on w32 with:

  make qemu-ga.exe

or:

  make msi

To make that work, we tie VSS dependencies onto qemu-ga.exe.
However, in reality the DLL isn't part of the binary, so we use a
filter to pull them out of the LINK recipe, which attempts to link
against prereqs for binary targets. Additionally, it could be argued
that VSS is a separate distributable, and shouldn't be implied by
qemu-ga.exe binary target.

To avoid this, we can tie the VSS dependencies only to the 'msi'
target, but that would make it impossible to do a qga-only build of
the w32 distributable without building the 'msi' package, which was
supported in the past.

An alternative approach is to add a new target to build the whole
distributable. w32 allows us to use the same build target we use
on POSIX, 'qemu-ga', since the current binary-only target on w32
is 'qemu-ga.exe'.

To further simplify the build, we also make 'qemu-ga' build the MSI
package if the appropriate ./configure options are set, making the
full qga-only build the same on both POSIX and w32: `make qemu-ga`

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-10-19 18:28:06 -05:00
Markus Armbruster fec21036ff configure: Require Python 2.6
RHEL-6 and SLES-11 provide Python 2.6.  It'll also work on OS X back
to 10.6.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1441396383-17304-1-git-send-email-armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-12 18:29:25 +02:00
Peter Maydell c9003eb466 virtio-gpu: add 3d rendering support using virgl, misc fixes.
ui/gtk: add opengl context and scanout support (for virtio-gpu).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJWFjjrAAoJEEy22O7T6HE4DcoP/39p/sB46aGiIZI/5DieJVuS
 HGVKrNkOBEXBJItxgrC9z+ihcPE0F7sqkbalBZf/aJpQIszqwJraPKfZl2c63Uag
 fuJ3YGYh7MG3l601SUmPL3SwvaarBEn4pcChzv7lthLRHWWh0fA5sTAUECgKoZ/N
 TnLeCe+78Kn9LNqq4Cwib51H/b9Vijc8i04rsdc9okxoLA9QoRxl11nXkBY1RLnt
 rIUKMFGPegLxedDFdNi3gF7c5+vSw7u1xZvJK4vsSotoQaZxlHAqUR35w8ZH8TaE
 B7kTMD5cbF2hnJuaC33L/MfWTIED2Ru7LoQru91roW74tXP13o367jlT4jwD5MPb
 soxnJW+39Ipi8u8daZ9JzbQLR4l7tWi8SLFIMF2Vz1npPOGjjybhHl6DrHdo0X5w
 0IEZSN418GOYg76mX8mR1NEVIsAbx2EYGEJeuE/7vNmGipYr/eq8l5WqcqWZ2Iov
 2ZhqA1w+aopUJDA/M/iHFucb5vAq+Od6HnpCe3kB/kd7+1YPn1FE5gRfDC3BbRIQ
 qftYT4sVTHErJsLyOomd1YXSIMfbWXG9/CIEB4VZdKjYU0MJAIQbYbnUbKxhKRUa
 4CsnJYvMxYGpk9wYvHaM0Y7wRQFdfy8enTbs4Mte29ewRyc6YGcTnjAO+yeitLTn
 +k+Yp4qiwztkwVIEOlPn
 =cpgf
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-virgl-20151008-1' into staging

virtio-gpu: add 3d rendering support using virgl, misc fixes.
ui/gtk: add opengl context and scanout support (for virtio-gpu).

# gpg: Signature made Thu 08 Oct 2015 10:35:39 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-virgl-20151008-1:
  gtk/opengl: add opengl context and scanout support (GtkGLArea)
  gtk/opengl: add opengl context and scanout support (egl)
  opengl: add egl-context.[ch] helpers
  virtio-gpu: add cursor update tracepoint
  virtio-gpu: add 3d mode and virgl rendering support.
  virtio-gpu: update headers for virgl/3d
  virtio-gpu: change licence from GPLv2 to GPLv2+
  virtio-gpu: move iov free to virtio_gpu_cleanup_mapping_iov
  ui/console: add opengl context and scanout support interfaces.
  sdl2: stop flickering
  shaders: initialize vertexes once

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-09 17:30:03 +01:00
Gerd Hoffmann 925a040002 gtk/opengl: add opengl context and scanout support (GtkGLArea)
This allows virtio-gpu to render in 3d mode.
Uses native opengl support which is present
in gtk versions 3.16 and newer.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-10-08 10:34:53 +02:00
Gerd Hoffmann 9d9e152136 virtio-gpu: add 3d mode and virgl rendering support.
Add virglrenderer library detection.  Add 3d mode to virtio-gpu,
wire up virglrenderer library.  When in 3d mode render using the
new context management and texture scanout callbacks.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2015-10-08 10:31:35 +02:00
David Hildenbrand 8a641ff60f s390x/gdb: expose virtualization specific registers
Let's expose some virtual/fake registers as virtualization specific
registers.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1443689387-34473-3-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-02 13:31:52 +02:00
Daniel P. Berrange 4d9310f427 oslib-win32: only provide localtime_r/gmtime_r if missing
The oslib-win32 file currently provides a localtime_r and
gmtime_r replacement unconditionally. Some versions of
Mingw-w64 would provide crude macros for localtime_r/gmtime_r
which QEMU takes care to disable. Latest versions of Mingw-w64
now provide actual functions for localtime_r/gmtime_r, but
with a twist that you have to include unistd.h or pthread.h
before including time.h.  By luck some files in QEMU have
such an include order, resulting in compile errors:

  CC    util/osdep.o
In file included from include/qemu-common.h:48:0,
                 from util/osdep.c:48:
include/sysemu/os-win32.h:77:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls]
 struct tm *gmtime_r(const time_t *timep, struct tm *result);
            ^
In file included from include/qemu-common.h:35:0,
                 from util/osdep.c:48:
/usr/i686-w64-mingw32/sys-root/mingw/include/time.h:272:107: note: previous definition of 'gmtime_r' was here
In file included from include/qemu-common.h:48:0,
                 from util/osdep.c:48:
include/sysemu/os-win32.h:79:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls]
 struct tm *localtime_r(const time_t *timep, struct tm *result);
            ^
In file included from include/qemu-common.h:35:0,
                 from util/osdep.c:48:
/usr/i686-w64-mingw32/sys-root/mingw/include/time.h:269:107: note: previous definition of 'localtime_r' was here

This change adds a configure test to see if localtime_r
exits, and only enables the QEMU impl if missing. We also
re-arrange qemu-common.h try attempt to guarantee that all
source files get unistd.h before time.h and thus see the
localtime_r/gmtime_r defs.

[sw: Use "official" spellings for Mingw-w64, MinGW in comments.]
[sw: Terminate sentences with a dot in comments.]

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
2015-09-24 21:13:49 +02:00
Marc-André Lureau 7b02f5447c libcacard: use the standalone project
libcacard is now a standalone project hosted with the Spice project (see
the 2.5.0 release announcement), remove it from qemu tree.

Use the library if found during configure or if --enable-smartcard.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-23 23:34:17 +02:00
Peter Maydell 1a3abef74b TileGX basic instructions
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJV+DHEAAoJEK0ScMxN0CebJOQH+wUhU4FsXu4BIsoQTKW+JYnW
 0PFQMUfUzFeJfAPr/9YOrPsYNak0mSYLyPUuPdpuc5MYXzx7sQwMJ9G3fAD/gM9G
 oKwcyusZspPIa4s7+/7tYlgN4FVAq/DEQg8H69q1XkpUYiYB+wBNUcQRwu9okpdM
 2r710d+L0Qqa7aXNRERtDjiZH0FvmBy/n3tgmdTgbw/M8j98Z9ZMfl9ZPpuCDf/M
 qqIv4NQE+AyfBR2H7iPr94pcKRPhTG3XjpMzmePcmjVmrRf4WdLwjgEomEQKLGCP
 fBML12NxtnxQT7Z7CHHnNa3PmbdXB54fDmX3/2tFGZk3ExKjp5sSGtePD2Ngjhg=
 =MjL9
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/rth/tags/pull-tile-20150915' into staging

TileGX basic instructions

# gpg: Signature made Tue 15 Sep 2015 15:57:08 BST using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/pull-tile-20150915: (35 commits)
  target-tilegx: Handle v1shl, v1shru, v1shrs
  target-tilegx: Handle v1shli, v1shrui
  target-tilegx: Handle v4int_l/h
  target-tilegx: Handle atomic instructions
  target-tilegx: Handle mtspr, mfspr
  target-tilegx: Handle v1cmpeq, v1cmpne
  target-tilegx: Handle mask instructions
  target-tilegx: Handle scalar multiply instructions
  target-tilegx: Handle conditional move instructions
  target-tilegx: Handle shift instructions
  target-tilegx: Handle bitfield instructions
  target-tilegx: Implement system and memory management instructions
  target-tilegx: Handle comparison instructions
  target-tilegx: Handle conditional branch instructions
  target-tilegx: Handle unconditional jump instructions
  target-tilegx: Handle post-increment load and store instructions
  target-tilegx: Handle basic load and store instructions
  target-tilegx: Handle most bit manipulation instructions
  target-arm: Use new revbit functions
  host-utils: Add revbit functions
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-15 17:24:28 +01:00
Chen Gang 444e06b172 target-tilegx: Add TILE-Gx building files
Add related configuration and make files for tilegx.
The target can now build, though not run anything.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP1588E5A03AD5E94B07E988B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-15 07:45:32 -07:00
Daniel P. Berrange 3e305e4a47 ui: convert VNC server to use QCryptoTLSSession
Switch VNC server over to using the QCryptoTLSSession object
for the TLS session. This removes the direct use of gnutls
from the VNC server code. It also removes most knowledge
about TLS certificate handling from the VNC server code.
This has the nice effect that all the CONFIG_VNC_TLS
conditionals go away and the user gets an actual error
message when requesting TLS instead of it being silently
ignored.

With this change, the existing configuration options for
enabling TLS with -vnc are deprecated.

Old syntax for anon-DH credentials:

  -vnc hostname:0,tls

New syntax:

  -object tls-creds-anon,id=tls0,endpoint=server \
  -vnc hostname:0,tls-creds=tls0

Old syntax for x509 credentials, no client certs:

  -vnc hostname:0,tls,x509=/path/to/certs

New syntax:

  -object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=no \
  -vnc hostname:0,tls-creds=tls0

Old syntax for x509 credentials, requiring client certs:

  -vnc hostname:0,tls,x509verify=/path/to/certs

New syntax:

  -object tls-creds-x509,id=tls0,dir=/path/to/certs,endpoint=server,verify-peer=yes \
  -vnc hostname:0,tls-creds=tls0

This aligns VNC with the way TLS credentials are to be
configured in the future for chardev, nbd and migration
backends. It also has the benefit that the same TLS
credentials can be shared across multiple VNC server
instances, if desired.

If someone uses the deprecated syntax, it will internally
result in the creation of a 'tls-creds' object with an ID
based on the VNC server ID. This allows backwards compat
with the CLI syntax, while still deleting all the original
TLS code from the VNC server.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-15 15:20:55 +01:00
Daniel P. Berrange 9a2fd4347c crypto: add sanity checking of TLS x509 credentials
If the administrator incorrectly sets up their x509 certificates,
the errors seen at runtime during connection attempts are very
obscure and difficult to diagnose. This has been a particular
problem for people using openssl to generate their certificates
instead of the gnutls certtool, because the openssl tools don't
turn on the various x509 extensions that gnutls expects to be
present by default.

This change thus adds support in the TLS credentials object to
sanity check the certificates when QEMU first loads them. This
gives the administrator immediate feedback for the majority of
common configuration mistakes, reducing the pain involved in
setting up TLS. The code is derived from equivalent code that
has been part of libvirt's TLS support and has been seen to be
valuable in assisting admins.

It is possible to disable the sanity checking, however, via
the new 'sanity-check' property on the tls-creds object type,
with a value of 'no'.

Unit tests are included in this change to verify the correctness
of the sanity checking code in all the key scenarios it is
intended to cope with. As part of the test suite, the pkix_asn1_tab.c
from gnutls is imported. This file is intentionally copied from the
(long since obsolete) gnutls 1.6.3 source tree, since that version
was still under GPLv2+, rather than the GPLv3+ of gnutls >= 2.0.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-09-15 15:05:09 +01:00
Peter Maydell a2aa09e181 * Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
 * cutils: qemu_strto* wrappers
 * iohandler.c simplification
 * Many other fixes and misc patches.
 
 And some MTTCG work (with Emilio's fixes squashed):
 * Signal-free TCG kick
 * Removing spinlock in favor of QemuMutex
 * User-mode emulation multi-threading fixes/docs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJV8Tk7AAoJEL/70l94x66Ds3QH/3bi0RRR2NtKIXAQrGo5tfuD
 NPMu1K5Hy+/26AC6mEVNRh4kh7dPH5E4NnDGbxet1+osvmpjxAjc2JrxEybhHD0j
 fkpzqynuBN6cA2Gu5GUNoKzxxTmi2RrEYigWDZqCftRXBeO2Hsr1etxJh9UoZw5H
 dgpU3j/n0Q8s08jUJ1o789knZI/ckwL4oXK4u2KhSC7ZTCWhJT7Qr7c0JmiKReaF
 JEYAsKkQhICVKRVmC8NxML8U58O8maBjQ62UN6nQpVaQd0Yo/6cstFTZsRrHMHL3
 7A2Tyg862cMvp+1DOX3Bk02yXA+nxnzLF8kUe0rYo6llqDBDStzqyn1j9R0qeqA=
 =nB06
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.

And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs

# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream: (44 commits)
  cutils: work around platform differences in strto{l,ul,ll,ull}
  cpu-exec: fix lock hierarchy for user-mode emulation
  exec: make mmap_lock/mmap_unlock globally available
  tcg: comment on which functions have to be called with mmap_lock held
  tcg: add memory barriers in page_find_alloc accesses
  remove unused spinlock.
  replace spinlock by QemuMutex.
  cpus: remove tcg_halt_cond and tcg_cpu_thread globals
  cpus: protect work list with work_mutex
  scripts/dump-guest-memory.py: fix after RAMBlock change
  configure: Add support for jemalloc
  add macro file for coccinelle
  configure: factor out adding disas configure
  vhost-scsi: fix wrong vhost-scsi firmware path
  checkpatch: remove tests that are not relevant outside the kernel
  checkpatch: adapt some tests to QEMU
  CODING_STYLE: update mixed declaration rules
  qmp: Add example usage of strto*l() qemu wrapper
  cutils: Add qemu_strtoull() wrapper
  cutils: Add qemu_strtoll() wrapper
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14 16:13:16 +01:00
Konrad Rzeszutek Wilk 20a544c7dc xen: use errno instead of rc for xc_domain_add_to_physmap
In Xen 4.6 commit cd2f100f0f61b3f333d52d1737dd73f02daee592
"libxc: Fix do_memory_op to return negative value on errors"
made the libxc API less odd-ball: On errors, return value is
-1 and error code is in errno. On success the return value
is either 0 or an positive value.

Since we could be running with an old toolstack in which the
Exx value is in rc or the newer, we add an wrapper around
the xc_domain_add_to_physmap (called xen_xc_domain_add_to_physmap)
which will always return the EXX.

Xen 4.6 did not change the libxc functions mentioned (same parameters)
so we piggyback on the fact that Xen 4.6 has a new function:
commit 504ed2053362381ac01b98db9313454488b7db40 "tools/libxc: Expose
new hypercall xc_reserved_device_memory_map" and check for that.

Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Suggested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10 12:04:30 +00:00
Jan Beulich d8b441a3fb xen/HVM: atomically access pointers in bufioreq handling
The number of slots per page being 511 (i.e. not a power of two) means
that the (32-bit) read and write indexes going beyond 2^32 will likely
disturb operation. The hypervisor side gets I/O req server creation
extended so we can indicate that we're using suitable atomic accesses
where needed, allowing it to atomically canonicalize both pointers when
both have gone through at least one cycle.

The Xen side counterpart (which is not a functional prereq to this
change, albeit a build one) went in already (commit b7007bc6f9).

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10 12:04:29 +00:00
Alexandre Derumier 7b01cb974f configure: Add support for jemalloc
This adds "--enable-jemalloc" and "--disable-jemalloc" to allow linking
to jemalloc memory allocator.

We have already tcmalloc support,
but it seem to not working well with a lot of iothreads/disks.

The main problem is that tcmalloc use a shared thread cache of 16MB
by default.
With more threads, this cache is shared, and some bad garbage collections
can occur if the cache is too low.

It's possible to tcmalloc cache increase it with a env var:
TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=256MB

With default 16MB, performances are  really bad with more than 2 disks.
Increasing to 256MB, it's helping but still have problem with 16 disks/iothreads.

Jemalloc don't have performance problem with default configuration.

Here the benchmark results in iops of 1 qemu vm randread 4K iodepth=32,
with rbd block backend (librbd is doing a lot of memory allocation),
1 iothread by disk

glibc malloc
------------

1 disk      29052
2 disks     55878
4 disks     127899
8 disks     240566
15 disks    269976

jemalloc
--------

1 disk      41278
2 disks     75781
4 disks     195351
8 disks     294241
15 disks    298199

tcmalloc 2.2.1 default 16M cache
--------------------------------

1 disk   37911
2 disks  67698
4 disks  41076
8 disks  43312
15 disks 37569

tcmalloc : 256M cache
---------------------------

1 disk     33914
2 disks    58839
4 disks    148205
8 disks    213298
15 disks   218383

Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
Message-Id: <1434711418-20429-1-git-send-email-aderumier@odiso.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09 15:34:55 +02:00
Peter Crosthwaite c765fcac96 configure: factor out adding disas configure
Every arch adds its disas configury to both its own config as well
config_disas_all. Make a small function do to both at once.

Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <1440844439-19391-1-git-send-email-crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09 15:34:55 +02:00
David Hildenbrand 5b9f6345a6 s390x/gdb: support reading/writing of control registers
Let's support reading and writing of control registers for kvm and tcg.

We have to take care of flushing the tlb (tcg) and pushing the changed
registers into kvm.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-09-07 16:10:43 +02:00
Michael Roth f33ca81f13 build: qemu-ga: fix VSS dependencies
Currently VSS dll/tlb files for use in w32 builds are only built as a
result of having been added to the general 'tools' target alongside
qemu-ga. This is fine for default make target, but if we build
qemu-ga directly via `make qemu-ga.exe`, the VSS files are not
created.

Fix this by moving the VSS dependencies to qemu-ga.exe directly.
With this move we can move the VSS files back out of 'tools',
and drop the extra handling from MSI target in Makefile.

Now we can build qemu-ga MSI package with:
  ./configure ...
  make qemu-ga.exe
  make msi

or simply:
  ./configure ...
  make msi

and no longer need to do a full build beforehand.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01 13:16:26 -05:00
Michael Roth 1a34904e5b configure: qemu-ga: explicitly enable qemu-ga MSI support when probed
Currently, if we don't explicitly disable support for MSI installer
via --disable-guest-agent-msi, the configure variable that tracks
the flag, 'guest_agent_msi', never gets set unless one of the probes
fails. Subsequent code then treats this unset value the same as if it
were a "yes" value (via != "no" style checks).

Instead, set the default "yes" value explicitly after the probes, then
make subsequent code expect the values to be set.

This makes it easier to report on whether or not MSI support was
enabled via probe by looking at the ./configure summary.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01 13:16:26 -05:00
Michael Roth 9d6bc27b7e configure: qemu-ga: move MSI installer probe after qga probe
MSI probe assumes that qemu-ga support has been probed already, but in
cases where --enable-guest-agent/--disable-guest-agent have not been
passed to configure, qemu-ga support may end up getting enabled later,
as is the case with w32 builds. This leads to MSI probe prematurely
reporting error due to lack of qemu-ga support.

Fix this by moving MSI installer probe after the final qga probes.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01 13:16:26 -05:00
Marc-André Lureau 259434b806 qemu-ga: implement win32 guest-set-user-password
Use NetUserSetInfo() to set the user password.

This function is notoriously known to be problematic for users with EFS
encrypted files. But the alternative, NetUserChangePassword() requires
the old password. Nevertheless, The EFS file should be recovered by
changing back to the old password.

Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01 13:16:26 -05:00
Michael Roth 4c875d89cb configure: qemu-ga: report MSI install support in summary
Currently we need to examine config-host.mak to determine whether
options/probes for MSI package generation had desired result. Report
this more prominently in ./configure summary as we do with other
guest agent configure options.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-09-01 11:07:09 -05:00
Laurent Vivier 4cbea59869 linux-user: remove --enable-guest-base/--disable-guest-base
All tcg host architectures now support the guest base and as
there is no real performance lost, it can be always enabled.

Anyway, guest base use can be disabled lively by setting guest
base to 0.

CONFIG_USE_GUEST_BASE is defined as (USE_GUEST_BASE && USER_ONLY),
it should have to be replaced by CONFIG_USER_ONLY in non CONFIG_USER_ONLY
parts, but as some other parts are using !CONFIG_SOFTMMU I have chosen to
use !CONFIG_SOFTMMU instead.

Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440373328-9788-2-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24 11:14:17 -07:00
Peter Maydell a30878e708 configure: Don't permit SDL or GTK on OSX
The cocoa GUI frontend assumes it is the only GUI (it redefines
main() so it always gets control before the rest of QEMU), so
it does not play well with other UIs like SDL or GTK. (Mostly
people building QEMU on OSX don't have the necessary dependencies
available for configure to build those other front ends, so
mostly this problem goes unnoticed.)

Make configure automatically disable the SDL and GTK front ends
if the cocoa front end is enabled. (We were sort of attempting
to do this for SDL before, but not in a way that worked very well.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 1439565052-3457-1-git-send-email-peter.maydell@linaro.org
2015-08-19 20:29:30 +01:00
Peter Maydell 5452b6f61a * SCSI fixes from Stefan and Fam
* vhost-scsi fix from Igor and Lu Lina
 * a build system fix from Daniel
 * two more multi-arch-related patches from Peter C.
 * TCG patches from myself and Sergey Fedorov
 * RCU improvement from Wen Congyang
 * a few more simple cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJVzmCgAAoJEL/70l94x66DhFgH/1m3iGac2Ks3vAUAdS2HBcxC
 EeziMwWFmkrfbtzUkz/jE0NG5uA2Bs8OFHsC8vmQFwkpDbGUlJ1zd5/N5UOHMG3d
 zF0vd+nKNw9C1Fo0/LPyQSeP64/xXEMTmFLqmYf4ZOowz8lr/m6WYrMIzKUoXSEn
 FeRtq78moDT8qwF372j8aoQUUpsctXDHBQHORZdcERvlc4mxojeJ3+mNViR2bv3r
 92PwGvrJ26mQXEKmGo5O1VM4k7QVg7xJQfgE11x7ShE2E9fJDMgts0Q/xCjWCLwS
 BXtEtbd9QeFEfG/mlRFevGtuvksq98m0hN7lAWb13zWmlJFuLyyMmlGfGAlU55Q=
 =Y2DB
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* SCSI fixes from Stefan and Fam
* vhost-scsi fix from Igor and Lu Lina
* a build system fix from Daniel
* two more multi-arch-related patches from Peter C.
* TCG patches from myself and Sergey Fedorov
* RCU improvement from Wen Congyang
* a few more simple cleanups

# gpg: Signature made Fri 14 Aug 2015 22:41:52 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  disas: Defeature print_target_address
  hw: fix mask for ColdFire UART command register
  scsi-generic: identify AIO callbacks more clearly
  scsi-disk: identify AIO callbacks more clearly
  scsi: create restart bottom half in the right AioContext
  configure: only add CONFIG_RDMA to config-host.h once
  qemu-nbd: remove unnecessary qemu_notify_event()
  vhost-scsi: Clarify vhost_virtqueue_mask argument
  exec: use macro ROUND_UP for alignment
  rcu: Allow calling rcu_(un)register_thread() during synchronize_rcu()
  exec: drop cpu_can_do_io, just read cpu->can_do_io
  cpu_defs: Simplify CPUTLB padding logic
  cpu-exec: Do not invalidate original TB in cpu_exec_nocache()
  vhost/scsi: call vhost_dev_cleanup() at unrealize() time
  virtio-scsi-test: Add test case for tail unaligned WRITE SAME
  scsi-disk: Fix assertion failure on WRITE SAME
  tests: virtio-scsi: clear unit attention after reset
  scsi-disk: fix cmd.mode field typo
  virtio-scsi: use virtqueue_map_sg() when loading requests

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-18 17:06:41 +01:00
Daniel P. Berrange 4164719165 configure: only add CONFIG_RDMA to config-host.h once
For unknown reasons (probably a git rebase merge mistake)

  commit 2da776db48
  Author: Michael R. Hines <mrhines@us.ibm.com>
  Date:   Mon Jul 22 10:01:54 2013 -0400

    rdma: core logic

Adds CONFIG_RDMA to config-host.h twice, as can be seen
in the generated file:

 $ grep CONFIG_RDMA config-host.h
 #define CONFIG_RDMA 1
 #define CONFIG_RDMA 1

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1438345403-32467-1-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-08-14 23:40:32 +02:00
Andreas Färber f60c87154a configure: Drop vnc-ws feature from help text
Commit 8e9b0d2 (ui: convert VNC websockets to use crypto APIs) dropped
the --enable-vnc-ws option but forgot to update the help text. Fix this.

Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1437749257-3313-1-git-send-email-afaerber@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-03 15:32:17 +01:00
Peter Maydell 3737129917 configure: Work around broken static pkg-config info for Ubuntu gnutls
Unfortunately Ubuntu's pkg-config information for gnutls is broken
for the static linking case, and outputs --libs options which the
compiler does not recognize. Work around this problem by testing
that the --cflags/--libs output will at least allow compilation
before enabling gnutls support.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1437758888-22486-1-git-send-email-peter.maydell@linaro.org
2015-07-27 16:15:32 +01:00
Radim Krčmář becaeb726a crypto: fix build with nettle >= 3.0.0
In nettle 3, cbc_encrypt() accepts 'nettle_cipher_func' instead of
'nettle_crypt_func' and these two differ in 'const' qualifier of the
first argument.  The build fails with:

  In file included from crypto/cipher.c:71:0:
  ./crypto/cipher-nettle.c: In function ‘qcrypto_cipher_encrypt’:
  ./crypto/cipher-nettle.c:154:38: error: passing argument 2 of
  ‘nettle_cbc_encrypt’ from incompatible pointer type
           cbc_encrypt(ctx->ctx_encrypt, ctx->alg_encrypt,
                                               ^
  In file included from ./crypto/cipher-nettle.c:24:0,
                   from crypto/cipher.c:71:
  /usr/include/nettle/cbc.h:48:1: note: expected
  ‘void (*)(const void *, size_t, uint8_t *, const uint8_t *)
  but argument is of type
  ‘void (*)(      void *, size_t, uint8_t *, const uint8_t *)

To allow both versions, we switch to the new definition and #if typedef
it for old versions.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Message-Id: <1436548682-9315-2-git-send-email-rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-16 20:00:20 +02:00
Peter Maydell acf7b7fdf3 Bugfixes and Daniel Berrange's crypto library.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJVnQWdAAoJEL/70l94x66D6OgIAKJlzQfmy5w7Q9WD4vCMhD76
 JrpLSsn7Gx/Bws0Nu9nLQlqun5z4hiUxyG2kP/WqD9+tV3cpSMSyrG6ImVdqKnQ5
 +Z8WJZuREkQv0aqDUjQVST+eIDZuh2LWJXAjhgsCXUHY77eWb/7WmKT79xJOa+5C
 5xB1qxudqX5IsTvpiKKPbmUGYkAcvRX1dUSaFwRIMO0UyKn59B9WfM9a5slIbLW7
 XfI8+wEJshTVLuQkkTfdidWQc5M5DwlmO7ESUNR/BRPCPFeyjcDqgQY5pBM5XVo9
 C+S0R3zIt3Ew0fhCtLRyjlIT0bGfwjbU5HRiHcyldBKhNUZZjSUoOWJnYRHXUDY=
 =H8wA
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

Bugfixes and Daniel Berrange's crypto library.

# gpg: Signature made Wed Jul  8 12:12:29 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
  ossaudio: fix memory leak
  ui: convert VNC to use generic cipher API
  block: convert qcow/qcow2 to use generic cipher API
  ui: convert VNC websockets to use crypto APIs
  block: convert quorum blockdrv to use crypto APIs
  crypto: add a nettle cipher implementation
  crypto: add a gcrypt cipher implementation
  crypto: introduce generic cipher API & built-in implementation
  crypto: move built-in D3DES implementation into crypto/
  crypto: move built-in AES implementation into crypto/
  crypto: introduce new module for computing hash digests
  vl: move rom_load_all after machine init done

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-08 20:46:35 +01:00
Daniel P. Berrange 8e9b0d24fb ui: convert VNC websockets to use crypto APIs
Remove the direct use of gnutls for hash processing in the
websockets code, in favour of using the crypto APIs. This
allows the websockets code to be built unconditionally
removing countless conditional checks from the VNC code.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-9-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-08 13:11:01 +02:00
Daniel P. Berrange 488981a4af block: convert quorum blockdrv to use crypto APIs
Get rid of direct use of gnutls APIs in quorum blockdrv in
favour of using the crypto APIs. This avoids the need to
do conditional compilation of the quorum driver. It can
simply report an error at file open file instead if the
required hash algorithm isn't supported by QEMU.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-8-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-08 13:11:01 +02:00
Daniel P. Berrange ed754746fe crypto: add a nettle cipher implementation
If we are linking to gnutls already and gnutls is built against
nettle, then we should use nettle as a cipher backend in
preference to our built-in backend.

This will be used when linking against some GNUTLS 2.x versions
and all GNUTLS 3.x versions.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-7-git-send-email-berrange@redhat.com>
[Change "#elif" to "#elif defined". - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-08 13:11:01 +02:00
Daniel P. Berrange 62893b67cd crypto: add a gcrypt cipher implementation
If we are linking to gnutls already and gnutls is built against
gcrypt, then we should use gcrypt as a cipher backend in
preference to our built-in backend.

This will be used when linking against GNUTLS 1.x and many
GNUTLS 2.x versions.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-6-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-08 13:11:01 +02:00
Michael Roth c54e1eb492 qga: added GuestPCIAddress information
PCIAddress inforfation is obtained via SetupApi, which provides the
information about address, bus, etc. We look throught entire device tree
in the system and try to find device object for given volume. For this PDO
SetupDiGetDeviceRegistryProperty is called, which reads PCI configuration
for a given devicei if it is possible.

This is the most convinient way for a userspace service. The lookup is
performed for every volume available. However, this information is
not mandatory for vss-provider.

In order to use SetupApi we need to notify linker about it. We do not need
to install additional libs, so we do not make separate configuration
option to use libsetupapi.su

SetupApi gives as the same information as kernel driver
with IRP_MN_QUERY_INTERFACE.
https://support.microsoft.com/en-us/kb/253232

Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* stub out get_pci_info if !CONFIG_QGA_NTDDSCSI
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-07-07 20:59:04 -05:00
Michael Roth 50cbebb9a3 configure: add configure check for ntdddisk.h
This header file provides w32 ioctl definitions for working with disk
devices. Older versions of mingw do not expose this in a useable way,
so add a configure check and report it via CONFIG_QGA_NTDDSCSI.

Subsequent patches will use this macro to stub out functionality that
relies on this in cases where it's not available.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-07-07 20:59:04 -05:00
Kirk Allan 601e5a0618 qga: add win32 library iphlpapi
Add the iphlpapi library to use APIs such as GetAdaptersInfo and
GetAdaptersAddresses.

Signed-off-by: Kirk Allan <kallan@suse.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2015-07-07 20:13:13 -05:00
Daniel P. Berrange ddbb0d0966 crypto: introduce new module for computing hash digests
Introduce a new crypto/ directory that will (eventually) contain
all the cryptographic related code. This initially defines a
wrapper for initializing gnutls and for computing hashes with
gnutls. The former ensures that gnutls is guaranteed to be
initialized exactly once in QEMU regardless of CLI args. The
block quorum code currently fails to initialize gnutls so it
only works by luck, if VNC server TLS is not requested. The
hash APIs avoids the need to litter the rest of the code with
preprocessor checks and simplifies callers by allocating the
correct amount of memory for the requested hash.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-07 12:04:07 +02:00
Peter Maydell dc1e1350f8 virtio, pci fixes, enhancements
Almost exclusively bugfixes, though in this case,
 we are adding functionality to the pxb in order
 to make OVMF work on it.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVjVb/AAoJECgfDbjSjVRpeaEH/2bwK7BGgczEQ7fhzIEaQSQq
 SV7aychNZvUFASXLV6aVmQCdYixZxlI9KDn0pMRYntUcjxRRB48U3N5Sy4km46Pw
 LLN3vxGzHazlE7AJ5c+WVDf0e2k7v3CpZ/TKXzPHmvZXIuBfjKXtKzBgyQYxGkmL
 JgRrRSHDrsbvfmhI4uHMpCTYs/WeY1cuA1IzvimBjmvVP5kkko4NoX+HEWmGJ6WK
 13fQuV+Cvz7Yk40HRpPAM0QPV2etGCj+dU7xgF9BWnn9mzbGC5iy8EUClyGil/af
 k3i/bCxs6IgpQ76LaezJtGPtn1jbohrO4qRqlatUAJCwgCYMCkxkIk+Pr4A3x4c=
 =6WvB
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pci fixes, enhancements

Almost exclusively bugfixes, though in this case,
we are adding functionality to the pxb in order
to make OVMF work on it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri Jun 26 14:43:27 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  Fix glib_subprocess test
  hw/pci-bridge: format special OFW unit address for PXB host
  hw/core: explicit OFW unit address callback for SysBusDeviceClass
  hw/pci-bridge: disable SHPC in PXB
  hw/pci-bridge: introduce "shpc" property
  hw/pci: introduce shpc_present() helper function
  hw/pci-bridge: add macro for "msi" property
  hw/pci-bridge: add macro for "chassis_nr" property
  hw/pci-bridge: expose _test parameter in SHPC_VMSTATE()
  migration: introduce VMSTATE_BUFFER_UNSAFE_INFO_TEST()
  add pci-bridge-seat
  pc: cleanup and convert TMP ACPI device description to AML API
  MAINTAINERS: add ACPI entry
  vhost: correctly pass error to caller in vhost_dev_enable_notifiers()
  balloon: add a feature bit to let Guest OS deflate balloon on oom
  qdev: fix OVERFLOW_BEFORE_WIDEN
  virito-pci: fix OVERRUN problem

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-26 15:57:43 +01:00
Dr. David Alan Gilbert d46f7c9e64 Fix glib_subprocess test
A typo means that the tests dependent on glib with subprocess
support are never run.

Fixes: 9d41401b90

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-24 13:00:43 +02:00
Michael Tokarev c23f23b970 configure: rearrange --help and consolidate enable/disable together
This is an attempt to rearrange configure --help output a bit
and consolidate pairs of --enable/disable into its own section.

After this, help text is easier to sort, manage and read.
More descriptive text can be added as well, since we now have
more space.

While at it, mention en/dis-able-vte.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23 20:23:33 +03:00
Alex Bennée a4969e90b8 configure: append --extra-ldflags to LDFLAGS
The help text says --extra-ldflags is appended to LDFLAGS so make it so.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23 19:57:27 +03:00
Yossi Hindin 9dacf32d2c qemu-ga: Building Windows MSI installation with configure/Makefile
New options were added to enable Windows MSI installation package
creation:

Option --enable-guest-agent-msi, like the name suggests, enables building
Windows MSI package for QEMU guest agent; option --disable-guest-agent-msi
disables MSI package creation; by default, no MSI package is created

Signed-off-by: Yossi Hindin <yhindin@redhat.com>
Message-Id: <1430913460-13174-5-git-send-email-yhindin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-17 16:03:47 +02:00
Gerd Hoffmann 307119e7d9 only enable dsound in case the header file is present
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-15 12:42:47 +02:00
Kővágó, Zoltán 3cec7cc22f audio: remove winwave audio driver
DirectSound should be a superior choice on Windows.

Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-15 10:50:31 +02:00