Handle POWERPC_EXCP_TRAP in cpu_loop to deliver SIGTRAP on tw[i]/td[i].
The si_code comes from do_program_check in the kernel source file
arch/powerpc/kernel/traps.c
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220113170456.1796911-2-matheus.ferst@eldorado.org.br>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The PowerPC 601 processor is the first generation of processors to
implement the PowerPC architecture. It was designed as a bridge
processor and also could execute most of the instructions of the
previous POWER architecture. It was found on the first Macs and IBM
RS/6000 workstations.
There is not much interest in keeping the CPU model of this
POWER-PowerPC bridge processor. We have the 603 and 604 CPU models of
the 60x family which implement the complete PowerPC instruction set.
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203142756.1302515-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Use the new function instead of setting up a target_siginfo_t
and calling queue_signal. Fill in the missing PC for SIGTRAP.
The fault address for POWERPC_EXCP_ISI is nip exactly, not nip - 4.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220107213243.212806-20-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This value is fully internal to qemu, and so is not a TARGET define.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This value is fully internal to qemu, and so is not a TARGET define.
We use this as an extra marker for both host and target errno.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will raise SIGBUS directly from cpu_loop_exit_sigbus.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
qemu.h is included in various non-linux-user files (which
mostly want the TaskState struct and the functions for
doing usermode access to guest addresses like lock_user(),
unlock_user(), get_user*(), etc).
Split out the parts that are only used in linux-user itself
into a new user-internals.h. This leaves qemu.h with basically
three things:
* the definition of the TaskState struct
* the user-access functions and macros
* do_brk()
all of which are needed by code outside linux-user that
includes qemu.h.
The addition of all the extra #include lines was done with
sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user)
(and then undoing the change to fpa11.h).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Split the signal related prototypes into the existing header file
signal-common.h, and include it in those places that now require it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The translation of branch instructions always results in exit from
the TB. Remove the synthetic "exception" after no more uses.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210517205025.3777947-4-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Remove the synthetic "exception" after no more uses.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210517205025.3777947-3-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In save_user_regs, there are two bugs where we OR in a bit number
instead of the bit, clobbering the low bits of MSR. However:
The MSR_VR and MSR_SPE bits control the availability of the insns.
If the bits were not already set in MSR, then any attempt to access
those registers would result in SIGILL.
For linux-user, we always initialize MSR to the capabilities
of the cpu. We *could* add checks vs MSR where we currently
check insn_flags and insn_flags2, but we know they match.
Also, there's a stray cut-and-paste comment in restore.
Then, do not force little-endian binaries into big-endian mode.
Finally, use ppc_store_msr for the update to affect hflags.
Which is the reason none of these bugs were previously noticed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-10-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
POWER9 adds scv and rfscv instructions and the system call vectored
interrupt. Linux does not support this instruction yet but it has
been tested with a modified kernel that runs on real hardware.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200507115328.789175-1-npiggin@gmail.com>
[dwg: Corrected an overlong line]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The virtual timebase register (VTB) is a 64-bit register which
increments at the same rate as the timebase register, present on POWER8
and later processors.
The register is able to be read/written by the hypervisor and read by
the supervisor. All other accesses are illegal.
Currently the VTB is just an alias for the timebase (TB) register.
Implement the VTB so that is can be read/written independent of the TB.
Make use of the existing method for accessing timebase facilities where
by the compensation is stored and used to compute the value on reads/is
updated on writes.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[ clg: rebased on current ppc tree ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191128134700.16091-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Cleanup in the boilerplate that each target must define.
Replace ppc_env_get_cpu with env_archcpu. The combination
CPU(ppc_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The CPU main-loop routines for linux-user generally
call gdb_handlesig() when they're about to queue a
SIGTRAP signal. This is wrong, because queue_signal()
will cause us to pend a signal, and process_pending_signals()
will then call gdb_handlesig() itself. So the effect is that
we notify gdb of the SIGTRAP, and then if gdb says "OK,
continue with signal X" we will incorrectly notify
gdb of the signal X as well. We don't do this double-notify
for anything else, only SIGTRAP.
Remove this unnecessary and incorrect code from all
the targets except for nios2 (whose main loop is
doing something different and broken, and will be handled
in a separate patch).
This bug only manifests if the user responds to the reported
SIGTRAP using "signal SIGFOO" rather than "continue"; since
the latter is the overwhelmingly common thing to do after a
breakpoint most people won't have hit this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181019174958.26616-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Always use the gen_conditional_store implementation that uses
atomic_cmpxchg. Make sure and clear reserve_addr across most
interrupts crossing the cpu_loop.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
No code change, only move code from main.c to
ppc/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-7-laurent@vivier.eu>
Create a cpu_loop-common.h for future use by
these new files and use it in the existing
main.c
Introduce target_cpu_copy_regs():
declare the function in cpu_loop-common.h
and an empty function for each target,
to move all the cpu_loop prologues to this function.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-2-laurent@vivier.eu>
