Commit Graph

1941 Commits

Author SHA1 Message Date
Philippe Mathieu-Daudé 44cbf34975 hw/arm/musicpal: Only use qdev_get_gpio_in() when necessary
We don't need to fill the full pic[] array if we only use
few of the interrupt lines. Directly call qdev_get_gpio_in()
when necessary.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201107193403.436146-6-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-10 11:03:48 +00:00
Philippe Mathieu-Daudé 498661dd22 hw/arm/musicpal: Don't connect two qemu_irqs directly to the same input
The MusicPal board code connects both of the IRQ outputs of the UART
to the same INTC qemu_irq. Connecting two qemu_irqs outputs directly
to the same input is not valid as it produces subtly wrong behaviour
(for instance if both the IRQ lines are high, and then one goes
low, the INTC input will see this as a high-to-low transition
even though the second IRQ line should still be holding it high).

This kind of wiring needs an explicitly created OR gate; add one.

Inspired-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201107193403.436146-5-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-10 11:03:48 +00:00
Philippe Mathieu-Daudé bdad3654d3 hw/arm/nseries: Remove invalid/unnecessary n8x0_uart_setup()
omap2420_mpu_init() introduced in commit 827df9f3c5 ("Add basic
OMAP2 chip support") takes care of creating the 3 UARTs.

Then commit 58a26b477e ("Emulate a serial bluetooth HCI with H4+
extensions and attach to n8x0's UART") added n8x0_uart_setup()
which create the UART and connects it to an IRQ output,
overwritting the existing peripheral and its IRQ connection.
This is incorrect.

Fortunately we don't need to fix this, because commit 6da68df7f9
("hw/arm/nseries: Replace the bluetooth chardev with a "null"
chardev") removed the use of this peripheral. We can simply
remove the code.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201107193403.436146-4-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-10 11:03:48 +00:00
Philippe Mathieu-Daudé 2108e5092a hw/misc/stm32f2xx_syscfg: Remove extraneous IRQ
The system configuration controller (SYSCFG) doesn't have
any output IRQ (and the INTC input #71 belongs to the UART6).
Remove the invalid code.

Fixes: db635521a0 ("stm32f205: Add the stm32f205 SoC")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201107193403.436146-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-10 11:03:48 +00:00
Philippe Mathieu-Daudé 509602eed4 hw/arm/armsse: Correct expansion MPC interrupt lines
We can use one MPC per SRAM bank, but we currently only wire the
IRQ from the first expansion MPC to the IRQ splitter. Fix that.

Fixes: bb75e16d5e ("hw/arm/iotkit: Wire up MPC interrupt lines")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201107193403.436146-2-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-10 11:03:48 +00:00
Philippe Mathieu-Daudé bec3c97e0c hw/arm/virt: Remove dependency on Cortex-A15 MPCore peripherals
When using a Cortex-A15, the Virt machine does not use any
MPCore peripherals. Remove the dependency.

Fixes: 7951c7b7c0 ("hw/arm: Express dependencies of the virt machine with Kconfig")
Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201107114852.271922-1-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-10 11:03:48 +00:00
Andrew Jones 9ad5f6b05f hw/arm/Kconfig: ARM_V7M depends on PTIMER
commit 32bd322a01 ("hw/timer/armv7m_systick: Rewrite to use ptimers")
changed armv7m_systick to build on ptimers. Make sure we have ptimers
in the build when building armv7m_systick.

Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201104103343.30392-1-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-10 11:03:47 +00:00
Rémi Denis-Courmont 3f0b59070c hw/arm/boot: fix SVE for EL3 direct kernel boot
When booting a CPU with EL3 using the -kernel flag, set up CPTR_EL3 so
that SVE will not trap to EL3.

Signed-off-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201030151541.11976-1-remi@remlab.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:52:16 +00:00
Philippe Mathieu-Daudé 744a790ec0 hw/arm/smmuv3: Fix potential integer overflow (CID 1432363)
Use the BIT_ULL() macro to ensure we use 64-bit arithmetic.
This fixes the following Coverity issue (OVERFLOW_BEFORE_WIDEN):

  CID 1432363 (#1 of 1): Unintentional integer overflow:

  overflow_before_widen:
    Potentially overflowing expression 1 << scale with type int
    (32 bits, signed) is evaluated using 32-bit arithmetic, and
    then used in a context that expects an expression of type
    hwaddr (64 bits, unsigned).

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20201030144617.1535064-1-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-11-02 16:52:16 +00:00
Peter Maydell a19d4bc452 ppc patch queue 2020-10-28
Here's the next pull request for ppc and spapr related patches, which
 should be the last things for soft freeze.  Includes:
 
  * Numerous error handling cleanups from Greg Kurz
  * Cleanups to cpu realization and hotplug handling from Greg Kurz
  * A handful of other small fixes and cleanups
 
 This does include a change to pc_dimm_plug() that isn't in my normal
 areas of concern.  That's there as a a prerequisite for ppc specific
 changes, and has an ack from Igor.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAl+YKwEACgkQbDjKyiDZ
 s5LNmg/+J/nKfe494WPSDhOgpQNz4NJD1GZUOsADwuvDPQWmMdl4dY3MKd+ipN1X
 HYmor7t+A5cvtm5zS0sHEZR/lg9qz3Oqc1nWpR+IJ7JmZMlmPbCKc6Iah4R1rQgA
 N17C2LSdBXGN84cmi3B0IbMPxpogFM7SqiSG7T4QIy7nZ/gm/aYwejVs+lLA7vjl
 hZmRnX76GE8fU0SzzmvIKTYwIqPbaZELP4LDmzKczdsWKvwOfeyUEp2loZ+xtyzc
 s1ecJTaTRcgaiB5Ylu10Bv5/L07P4YxV2lMhd8WJqq6Ki/fdUIeVyP6lnZyTQVkj
 YxtfrFsObVjNkHl8JtXG07QoQkGvkJLXGNyoPoCQy8ZEahYjjwP88UltAhENCllY
 uDtR6fLj0YnpHu9gW1onGpkxjI93QaiWA0ePoF/z1gQ8E6G3vwSmI4h5FC4UHNv5
 NNtHIJNgFj1icf8C8lyh5DBNqYNt8FFTS2iAmtl7eDbWcaDj1+fZWXQHqJS1CUI1
 P8d2TNJXEyJ7fxfzk56LovdwvLs4/fLb4Lu5loi5CC4JPaYiwC7dEbhRPsxq8F++
 l9gwfnnKo1WYkx8Y3PZEpXcoypCOGQToVAi519lx8YfRYeFTIXrR8vqOAfpeQpXY
 9tktUFMgFZDoJl/Jc81enMjWy+mnmcIPfFR12vZ2LIR3X0tHE/g=
 =igPS
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20201028' into staging

ppc patch queue 2020-10-28

Here's the next pull request for ppc and spapr related patches, which
should be the last things for soft freeze.  Includes:

 * Numerous error handling cleanups from Greg Kurz
 * Cleanups to cpu realization and hotplug handling from Greg Kurz
 * A handful of other small fixes and cleanups

This does include a change to pc_dimm_plug() that isn't in my normal
areas of concern.  That's there as a a prerequisite for ppc specific
changes, and has an ack from Igor.

# gpg: Signature made Tue 27 Oct 2020 14:13:21 GMT
# gpg:                using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-5.2-20201028:
  ppc/: fix some comment spelling errors
  spapr: Improve spapr_reallocate_hpt() error reporting
  target/ppc: Fix kvmppc_load_htab_chunk() error reporting
  spapr: Use error_append_hint() in spapr_reallocate_hpt()
  spapr: Simplify error handling in spapr_memory_plug()
  spapr: Pass &error_abort when getting some PC DIMM properties
  spapr: Use appropriate getter for PC_DIMM_SLOT_PROP
  spapr: Use appropriate getter for PC_DIMM_ADDR_PROP
  pc-dimm: Drop @errp argument of pc_dimm_plug()
  spapr: Simplify spapr_cpu_core_realize() and spapr_cpu_core_unrealize()
  spapr: Make spapr_cpu_core_unrealize() idempotent
  spapr: Drop spapr_delete_vcpu() unused argument
  spapr: Unrealize vCPUs with qdev_unrealize()
  spapr: Fix leak of CPU machine specific data
  spapr: Move spapr_create_nvdimm_dr_connectors() to core machine code
  hw/net: move allocation to the heap due to very large stack frame
  ppc/spapr: re-assert IRQs during event-scan if there are pending
  spapr: Clarify why DR connectors aren't user creatable

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-29 14:30:58 +00:00
Peter Maydell 802427bcda target-arm queue:
* raspi: add model of cprman clock manager
  * sbsa-ref: add an SBSA generic watchdog device
  * arm/trace: Fix hex printing
  * raspi: Add models of Pi 3 model A+, Pi Zero and Pi A+
  * hw/arm/smmuv3: Set the restoration priority of the vSMMUv3 explicitly
  * Nuvoton NPCM7xx: Add USB, RNG, GPIO and watchdog support
  * hw/arm: fix min_cpus for xlnx-versal-virt platform
  * hw/arm/highbank: Silence warnings about missing fallthrough statements
  * linux-user: Support Aarch64 BTI
  * Armv7M systick: fix corner case bugs by rewriting to use ptimer
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAl+YBA4ZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3rWRD/9hqjzL4d7xKcFQdQdRXsxv
 7zX82arHdxg9pNvusie/tuhX0PLswQ8TPEHEBVQvngxF7y/HqLBFuZAQvFf4ou6R
 9+myTXE2RuWHOYKlrr/M6p4csABXNMm7PiA3VMeKcTEh4DoamLyBz6j1X4obPiA+
 tLaRw4azzYAZnHoCaF6BX+4uf4bQZoqAtAS4IodJAAbDXJStl0VUFoS34MPhgW6/
 dwGF8DbQJVYRqa7xEXck4Yx7dkx13I66+iYUf9kCyoCkdyz1sIq58fbKhXQP4lqN
 I3e5XGBVJfeku7w/TGOpsw8OCyTng0z636iglfLVOrsj5N03fT8j72ehY7jJsN9f
 CgHvQ1JAX1DvA/v23oxs3WccwAOfJJsOERtf9QxyMbTR1czCeIY1LYMnkOFtyL87
 6IQpwM0WF1z4lja0dmrvhKJWjqn+kVI2cDtxrprsulCHi+pcIdJMq8vJDfxjpqqe
 SnDXVSAn8KjBrClaJRqHfbi+5ggsTwsLpBtEToQ4AOR342XVRfEY8IfTLb1D2+6q
 z99BFiyJtZ6iiJq5jgGMhppN6tEuHFK7Vr6IwhGDgFTchWb6by+K3i8/VzrbWVk9
 O+KEeO92dg6jVd+6FyXOPnJ3DcUXEp6EVUVrKBBUC+LTU8Lf1MCgeprjSi87UHIX
 xQg635uOQU3gxkqxCaE0XA==
 =OFlu
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20201027-1' into staging

target-arm queue:
 * raspi: add model of cprman clock manager
 * sbsa-ref: add an SBSA generic watchdog device
 * arm/trace: Fix hex printing
 * raspi: Add models of Pi 3 model A+, Pi Zero and Pi A+
 * hw/arm/smmuv3: Set the restoration priority of the vSMMUv3 explicitly
 * Nuvoton NPCM7xx: Add USB, RNG, GPIO and watchdog support
 * hw/arm: fix min_cpus for xlnx-versal-virt platform
 * hw/arm/highbank: Silence warnings about missing fallthrough statements
 * linux-user: Support Aarch64 BTI
 * Armv7M systick: fix corner case bugs by rewriting to use ptimer

# gpg: Signature made Tue 27 Oct 2020 11:27:10 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20201027-1: (48 commits)
  hw/timer/armv7m_systick: Rewrite to use ptimers
  hw/core/ptimer: Support ptimer being disabled by timer callback
  hw/arm/sbsa-ref: add SBSA watchdog device
  hw/watchdog: Implement SBSA watchdog device
  hw/arm/bcm2835_peripherals: connect the UART clock
  hw/char/pl011: add a clock input
  hw/misc/bcm2835_cprman: add sane reset values to the registers
  hw/misc/bcm2835_cprman: add the DSI0HSCK multiplexer
  hw/misc/bcm2835_cprman: implement clock mux behaviour
  hw/misc/bcm2835_cprman: add a clock mux skeleton implementation
  hw/misc/bcm2835_cprman: implement PLL channels behaviour
  hw/misc/bcm2835_cprman: add a PLL channel skeleton implementation
  hw/misc/bcm2835_cprman: implement PLLs behaviour
  hw/misc/bcm2835_cprman: add a PLL skeleton implementation
  hw/arm/raspi: add a skeleton implementation of the CPRMAN
  hw/arm/raspi: fix CPRMAN base address
  hw/core/clock: trace clock values in Hz instead of ns
  hw/core/clock: provide the VMSTATE_ARRAY_CLOCK macro
  arm/trace: Fix hex printing
  hw/arm/raspi: Add the Raspberry Pi 3 model A+
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-29 11:40:04 +00:00
Greg Kurz 84fd549619 pc-dimm: Drop @errp argument of pc_dimm_plug()
pc_dimm_plug() doesn't use it. It only aborts on error.

Drop @errp and adapt the callers accordingly.

[dwg: Removed unused label to fix compile]
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160309728447.2739814.12831204841251148202.stgit@bahia.lan>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-10-28 01:08:53 +11:00
Shashi Mallela baabe7d03c hw/arm/sbsa-ref: add SBSA watchdog device
Included the newly implemented SBSA generic watchdog device model into
SBSA platform

Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201027015927.29495-3-shashi.mallela@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Shashi Mallela 4204c5f703 hw/watchdog: Implement SBSA watchdog device
Generic watchdog device model implementation as per ARM SBSA v6.0

Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Message-id: 20201027015927.29495-2-shashi.mallela@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Luc Michel 581bb849f7 hw/arm/bcm2835_peripherals: connect the UART clock
Connect the 'uart-out' clock from the CPRMAN to the PL011 instance.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Luc Michel <luc@lmichel.fr>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Luc Michel fc14176ba2 hw/arm/raspi: add a skeleton implementation of the CPRMAN
The BCM2835 CPRMAN is the clock manager of the SoC. It is composed of a
main oscillator, and several sub-components (PLLs, multiplexers, ...) to
generate the BCM2835 clock tree.

This commit adds a skeleton of the CPRMAN, with a dummy register
read/write implementation. It embeds the main oscillator (xosc) from
which all the clocks will be derived.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Luc Michel <luc@lmichel.fr>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Luc Michel 74de7145fd hw/arm/raspi: fix CPRMAN base address
The CPRMAN (clock controller) was mapped at the watchdog/power manager
address. It was also split into two unimplemented peripherals (CM and
A2W) but this is really the same one, as shown by this extract of the
Raspberry Pi 3 Linux device tree:

    watchdog@7e100000 {
            compatible = "brcm,bcm2835-pm\0brcm,bcm2835-pm-wdt";
            [...]
            reg = <0x7e100000 0x114 0x7e00a000 0x24>;
            [...]
    };

    [...]
    cprman@7e101000 {
            compatible = "brcm,bcm2835-cprman";
            [...]
            reg = <0x7e101000 0x2000>;
            [...]
    };

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Luc Michel <luc@lmichel.fr>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Dr. David Alan Gilbert 43f828e155 arm/trace: Fix hex printing
Use of 0x%d - make up our mind as 0x%x

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20201014193355.53074-1-dgilbert@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Philippe Mathieu-Daudé 5be94252d3 hw/arm/raspi: Add the Raspberry Pi 3 model A+
The Pi 3A+ is a stripped down version of the 3B:
- 512 MiB of RAM instead of 1 GiB
- no on-board ethernet chipset

Add it as it is a closer match to what we model.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201024170127.3592182-10-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Philippe Mathieu-Daudé 3c8f9927fd hw/arm/raspi: Add the Raspberry Pi Zero machine
Similarly to the Pi A, the Pi Zero uses a BCM2835 SoC (ARMv6Z core).

The only difference between the revision 1.2 and 1.3 is the latter
exposes a CSI camera connector. As we do not implement the Unicam
peripheral, there is no point in exposing a camera connector :)
Therefore we choose to model the 1.2 revision.

Example booting the machine using content from [*]:

  $ qemu-system-arm -M raspi0 -serial stdio \
      -kernel raspberrypi/firmware/boot/kernel.img \
      -dtb raspberrypi/firmware/boot/bcm2708-rpi-zero.dtb \
      -append 'printk.time=0 earlycon=pl011,0x20201000 console=ttyAMA0'
  [    0.000000] Booting Linux on physical CPU 0x0
  [    0.000000] Linux version 4.19.118+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1311 Mon Apr 27 14:16:15 BST 2020
  [    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  [    0.000000] CPU: VIPT aliasing data cache, unknown instruction cache
  [    0.000000] OF: fdt: Machine model: Raspberry Pi Zero
  ...

[*] http://archive.raspberrypi.org/debian/pool/main/r/raspberrypi-firmware/raspberrypi-kernel_1.20200512-2_armhf.deb

Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201024170127.3592182-9-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Philippe Mathieu-Daudé ac6bc6ebb4 hw/arm/raspi: Add the Raspberry Pi A+ machine
The Pi A is almost the first machine released.
It uses a BCM2835 SoC which includes a ARMv6Z core.

Example booting the machine using content from [*]
(we use the device tree from the B model):

  $ qemu-system-arm -M raspi1ap -serial stdio \
      -kernel raspberrypi/firmware/boot/kernel.img \
      -dtb raspberrypi/firmware/boot/bcm2708-rpi-b-plus.dtb \
      -append 'earlycon=pl011,0x20201000 console=ttyAMA0'
  [    0.000000] Booting Linux on physical CPU 0x0
  [    0.000000] Linux version 4.19.118+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1311 Mon Apr 27 14:16:15 BST 2020
  [    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  [    0.000000] CPU: VIPT aliasing data cache, unknown instruction cache
  [    0.000000] OF: fdt: Machine model: Raspberry Pi Model B+
  ...

[*] http://archive.raspberrypi.org/debian/pool/main/r/raspberrypi-firmware/raspberrypi-kernel_1.20200512-2_armhf.deb

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201024170127.3592182-8-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Philippe Mathieu-Daudé df6cf08dea hw/arm/bcm2836: Introduce the BCM2835 SoC
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201024170127.3592182-7-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Philippe Mathieu-Daudé f5600924ad hw/arm/bcm2836: Split out common realize() code
The realize() function is clearly composed of two parts,
each described by a comment:

  void realize()
  {
     /* common peripherals from bcm2835 */
     ...
     /* bcm2836 interrupt controller (and mailboxes, etc.) */
     ...
   }

Split the two part, so we can reuse the common part with other
SoCs from this family.

Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201024170127.3592182-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Philippe Mathieu-Daudé 96c741d7ce hw/arm/bcm2836: Only provide "enabled-cpus" property to multicore SoCs
It makes no sense to set enabled-cpus=0 on single core SoCs.

Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201024170127.3592182-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Philippe Mathieu-Daudé 25ea288459 hw/arm/bcm2836: Introduce BCM283XClass::core_count
The BCM2835 has only one core. Introduce the core_count field to
be able to use values different than BCM283X_NCPUS (4).

Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201024170127.3592182-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Philippe Mathieu-Daudé 34d1a4f591 hw/arm/bcm2836: QOM'ify more by adding class_init() to each SoC type
Remove usage of TypeInfo::class_data. Instead fill the fields in
the corresponding class_init().

So far all children use the same values for almost all fields,
but we are going to add the BCM2711/BCM2838 SoC for the raspi4
machine which use different fields.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201024170127.3592182-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Philippe Mathieu-Daudé 58b350280e hw/arm/bcm2836: Restrict BCM283XInfo declaration to C source
No code out of bcm2836.c uses (or requires) the BCM283XInfo
declarations. Move it locally to the C source file.

Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201024170127.3592182-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Zenghui Yu a55aab6181 hw/arm/smmuv3: Set the restoration priority of the vSMMUv3 explicitly
Ensure the vSMMUv3 will be restored before all PCIe devices so that DMA
translation can work properly during migration.

Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20201019091508.197-1-yuzenghui@huawei.com
Acked-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:44 +00:00
Havard Skinnemoen 526dbbe087 hw/gpio: Add GPIO model for Nuvoton NPCM7xx
The NPCM7xx chips have multiple GPIO controllers that are mostly
identical except for some minor differences like the reset values of
some registers. Each controller controls up to 32 pins.

Each individual pin is modeled as a pair of unnamed GPIOs -- one for
emitting the actual pin state, and one for driving the pin externally.
Like the nRF51 GPIO controller, a gpio level may be negative, which
means the pin is not driven, or floating.

Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:32 +00:00
Havard Skinnemoen e23e7b1259 hw/arm/npcm7xx: Add EHCI and OHCI controllers
The NPCM730 and NPCM750 chips have a single USB host port shared between
a USB 2.0 EHCI host controller and a USB 1.1 OHCI host controller. This
adds support for both of them.

Testing notes:
  * With -device usb-kbd, qemu will automatically insert a full-speed
    hub, and the keyboard becomes controlled by the OHCI controller.
  * With -device usb-kbd,bus=usb-bus.0,port=1, the keyboard is directly
    attached to the port without any hubs, and the device becomes
    controlled by the EHCI controller since it's high speed capable.
  * With -device usb-kbd,bus=usb-bus.0,port=1,usb_version=1, the
    keyboard is directly attached to the port, but it only advertises
    itself as full-speed capable, so it becomes controlled by the OHCI
    controller.

In all cases, the keyboard device enumerates correctly.

Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:21 +00:00
Havard Skinnemoen 326ccfe240 hw/misc: Add npcm7xx random number generator
The RNG module returns a byte of randomness when the Data Valid bit is
set.

This implementation ignores the prescaler setting, and loads a new value
into RNGD every time RNGCS is read while the RNG is enabled and random
data is available.

A qtest featuring some simple randomness tests is included.

Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:10 +00:00
Hao Wu 7d378ed6e3 hw/timer: Adding watchdog for NPCM7XX Timer.
The watchdog is part of NPCM7XX's timer module. Its behavior is
controlled by the WTCR register in the timer.

When enabled, the watchdog issues an interrupt signal after a pre-set
amount of cycles, and issues a reset signal shortly after that.

Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: deleted blank line at end of npcm_watchdog_timer-test.c]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 11:10:01 +00:00
Pavel Dovgalyuk 7854104897 hw/arm: fix min_cpus for xlnx-versal-virt platform
This patch sets min_cpus field for xlnx-versal-virt platform,
because it always creates XLNX_VERSAL_NR_ACPUS cpus even with
-smp 1 command line option.

Signed-off-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 160343854912.8460.17915238517799132371.stgit@pasha-ThinkPad-X280
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 10:44:03 +00:00
Thomas Huth 83d5e19d3e hw/arm/highbank: Silence warnings about missing fallthrough statements
When compiling with -Werror=implicit-fallthrough, gcc complains about
missing fallthrough annotations in this file. Looking at the code,
the fallthrough is very likely intended here, so add some comments
to silence the compiler warnings.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20201020105938.23209-1-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-27 10:44:03 +00:00
Philippe Mathieu-Daudé 06972067c4 hw/arm/tosa: Replace fprintf() calls by LED devices
The recently added LED device reports LED status changes with
the 'led_set_intensity' trace event. It is less invasive than
the fprintf() calls. We need however to have a binary built
with tracing support.

Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200912134041.946260-8-f4bug@amsat.org>
2020-10-26 13:44:58 +01:00
Philippe Mathieu-Daudé 7cfbde5ea1 hw/arm/aspeed: Add the 3 front LEDs drived by the PCA9552 #1
The Witherspoon has 3 LEDs connected to a PCA9552. Add them.
The names and reset values are taken from:
https://github.com/open-power/witherspoon-xml/blob/master/witherspoon.xml

Example booting obmc-phosphor-image:

  $ qemu-system-arm -M witherspoon-bmc -trace led_change_intensity
  1592693373.997015:led_change_intensity LED desc:'front-fault-4' color:green intensity 0% -> 100%
  1592693373.997632:led_change_intensity LED desc:'front-power-3' color:green intensity 0% -> 100%
  1592693373.998239:led_change_intensity LED desc:'front-id-5' color:green intensity 0% -> 100%
  1592693500.291805:led_change_intensity LED desc:'front-power-3' color:green intensity 100% -> 0%
  1592693500.312041:led_change_intensity LED desc:'front-power-3' color:green intensity 0% -> 100%
  1592693500.821254:led_change_intensity LED desc:'front-power-3' color:green intensity 100% -> 0%
  1592693501.331517:led_change_intensity LED desc:'front-power-3' color:green intensity 0% -> 100%
  1592693501.841367:led_change_intensity LED desc:'front-power-3' color:green intensity 100% -> 0%
  1592693502.350839:led_change_intensity LED desc:'front-power-3' color:green intensity 0% -> 100%
  1592693502.861134:led_change_intensity LED desc:'front-power-3' color:green intensity 100% -> 0%
  1592693503.371090:led_change_intensity LED desc:'front-power-3' color:green intensity 0% -> 100%

We notice the front-power LED starts to blink at a ~2Hz rate.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200912134041.946260-5-f4bug@amsat.org>
2020-10-26 13:44:58 +01:00
Philippe Mathieu-Daudé b3267ff675 hw/arm/nseries: Fix loading kernel image on n8x0 machines
Commit 7998beb9c2 removed the ram_size initialization in the
arm_boot_info structure, however it is used by arm_load_kernel().

Initialize the field to fix:

  $ qemu-system-arm -M n800 -append 'console=ttyS1' \
    -kernel meego-arm-n8x0-1.0.80.20100712.1431-vmlinuz-2.6.35~rc4-129.1-n8x0
  qemu-system-arm: kernel 'meego-arm-n8x0-1.0.80.20100712.1431-vmlinuz-2.6.35~rc4-129.1-n8x0' is too large to fit in RAM (kernel size 1964608, RAM size 0)

Noticed while running the test introduced in commit 050a82f0c5
("tests/acceptance: Add a test for the N800 and N810 arm machines").

Fixes: 7998beb9c2 ("arm/nseries: use memdev for RAM")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20201019095148.1602119-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-20 16:12:01 +01:00
Philippe Mathieu-Daudé 722bde6789 hw/arm/bcm2835_peripherals: Correctly wire the SYS_timer IRQs
The SYS_timer is not directly wired to the ARM core, but to the
SoC (peripheral) interrupt controller.

Fixes: 0e5bbd7406 ("hw/arm/bcm2835_peripherals: Use the SYS_timer")
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201010203709.3116542-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-20 16:12:00 +01:00
Philippe Mathieu-Daudé b77a52a0c1 hw/arm: Restrict APEI tables generation to the 'virt' machine
While APEI is a generic ACPI feature (usable by X86 and ARM64), only
the 'virt' machine uses it, by enabling the RAS Virtualization. See
commit 2afa8c8519: "hw/arm/virt: Introduce a RAS machine option").

Restrict the APEI tables generation code to the single user: the virt
machine. If another machine wants to use it, it simply has to 'select
ACPI_APEI' in its Kconfig.

Fixes: aa16508f1d ("ACPI: Build related register address fields via hardware error fw_cfg blob")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201008161414.2672569-1-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-20 16:12:00 +01:00
Philippe Mathieu-Daudé 8ddd611a50 hw/arm/strongarm: Fix 'time to transmit a char' unit comment
The time to transmit a char is expressed in nanoseconds, not in ticks.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201014213601.205222-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-20 16:12:00 +01:00
Andrew Jones 68970d1e0d hw/arm/virt: Implement kvm-steal-time
We add the kvm-steal-time CPU property and implement it for machvirt.
A tiny bit of refactoring was also done to allow pmu and pvtime to
use the same vcpu device helper functions.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-7-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-08 15:24:32 +01:00
Andrew Jones 946f1bb18c hw/arm/virt: Move kvm pmu setup to virt_cpu_post_init
Move the KVM PMU setup part of fdt_add_pmu_nodes() to
virt_cpu_post_init(), which is a more appropriate location. Now
fdt_add_pmu_nodes() is also named more appropriately, because it
no longer does anything but fdt node creation.

No functional change intended.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-5-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-08 15:24:32 +01:00
Andrew Jones fe11f058c5 hw/arm/virt: Move post cpu realize check into its own function
We'll add more to this new function in coming patches so we also
state the gic must be created and call it below create_gic().

No functional change intended.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-4-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-08 15:24:32 +01:00
Graeme Gregory 04788fd5c5 hw/arm/sbsa-ref : allocate IRQs for SMMUv3
Original commit did not allocate IRQs for the SMMUv3 in the irqmap
effectively using irq 0->3 (shared with other devices). Assuming
original intent was to allocate unique IRQs then add an allocation
to the irqmap.

Fixes: e9fdf45324 ("hw/arm: Add arm SBSA reference machine, devices part")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20201007100732.4103790-3-graeme@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-08 15:24:32 +01:00
Graeme Gregory b8bf3472cc hw/arm/sbsa-ref : Fix SMMUv3 Initialisation
SMMUv3 has an error in a previous patch where an i was transposed to a 1
meaning interrupts would not have been correctly assigned to the SMMUv3
instance.

Fixes: 48ba18e6d3 ("hw/arm/sbsa-ref: Simplify by moving the gic in the machine state")
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20201007100732.4103790-2-graeme@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-08 15:24:32 +01:00
Peter Maydell 625581c260 target-arm queue:
* Make isar_feature_aa32_fp16_arith() handle M-profile
  * Fix SVE splice
  * Fix SVE LDR/STR
  * Remove ignore_memory_transaction_failures on the raspi2
  * raspi: Various cleanup/refactoring
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAl9169cZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3l40EACLY1pu2qyCWA2VLNjwI6Xa
 XScSzHH2cqq7GDRjloVAqbSp1PGnQc5agZT86im78yo6Xz7AMMg79dxyUTb4pv6d
 dm0i3g610avVMphbpl1LCGuMEWq9mqsEkpSwj9KlkavZWCT5Qwp6FQj5YPLhF5Xt
 lIH+vclXPUrhgIBHerOHAYMJQEjygBWeF2DQFcmjjEWL3bjD/n32SQ3TaYf8B3kE
 Zt/XVB3gMDleitBCrzmfmMEvfXoCC2d5QcPkWM1LsDgZo+/llB99mI1ndHoQJexJ
 clAZqggpVHCLhO3MwsRy1Nc2TkT8AdvYHfOk0I44/58VHARmgcOmPkY7VubsKVnz
 No9cgdVQEbnfWK/kh4vUKNf1UBTZDnNim0BdNLo1YsxDnSsNLrQRDx3XKg03653p
 49Dp9u0/w3iqTNvdil8kBUVIH/ACwuEFJ79YAQaQ5J2XR7hen57GGZGuq/NVAcxp
 fx1U0iwE9KBwSfrkhvCmZ0bTedyq1ZuaXp0Rf0Yrh3xWH2COHHr0fVCAZh23Pc7N
 n5ovkUCfUozRvrCJsdP0sYk3JikYYfLet8nqAewTCM+Jc1gVAc55l8jmlUn+0O9p
 RqNRktGFfNc6sS5H0ToysdIijeMrQqjClZbpON7NLH9/sFeWlf04NkF9CzDyKkQH
 EAk6kXmxVkhECpj5KHkLTA==
 =vKOh
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20201001' into staging

target-arm queue:
 * Make isar_feature_aa32_fp16_arith() handle M-profile
 * Fix SVE splice
 * Fix SVE LDR/STR
 * Remove ignore_memory_transaction_failures on the raspi2
 * raspi: Various cleanup/refactoring

# gpg: Signature made Thu 01 Oct 2020 15:46:47 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20201001:
  hw/arm/raspi: Remove use of the 'version' value in the board code
  hw/arm/raspi: Use RaspiProcessorId to set the firmware load address
  hw/arm/raspi: Introduce RaspiProcessorId enum
  hw/arm/raspi: Use more specific machine names
  hw/arm/raspi: Avoid using TypeInfo::class_data pointer
  hw/arm/raspi: Move arm_boot_info structure to RaspiMachineState
  hw/arm/raspi: Load the firmware on the first core
  hw/arm/raspi: Display the board revision in the machine description
  hw/arm/raspi: Remove ignore_memory_transaction_failures on the raspi2
  hw/arm/bcm2835: Add more unimplemented peripherals
  hw/arm/raspi: Define various blocks base addresses
  target/arm: Fix SVE splice
  target/arm: Fix sve ldr/str
  target/arm: Make isar_feature_aa32_fp16_arith() handle M-profile
  target/arm: Add ID register values for Cortex-M0
  hw/intc/armv7m_nvic: Only show ID register values for Main Extension CPUs
  target/arm: Move id_pfr0, id_pfr1 into ARMISARegisters
  target/arm: Replace ARM_FEATURE_PXN with ID_MMFR0.VMSA check

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01 16:41:30 +01:00
Philippe Mathieu-Daudé cdfaa57dcb hw/arm/raspi: Remove use of the 'version' value in the board code
We expected the 'version' ID to match the board processor ID,
but this is not always true (for example boards with revision
id 0xa02042/0xa22042 are Raspberry Pi 2 with a BCM2837 SoC).
This was not important because we were not modelling them, but
since the recent refactor now allow to model these boards, it
is safer to check the processor id directly. Remove the version
check.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-9-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01 15:31:01 +01:00
Philippe Mathieu-Daudé 1af702690e hw/arm/raspi: Use RaspiProcessorId to set the firmware load address
The firmware load address depends on the SoC ("processor id") used,
not on the version of the board.

Suggested-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-8-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01 15:31:01 +01:00
Philippe Mathieu-Daudé 696788d6a9 hw/arm/raspi: Introduce RaspiProcessorId enum
As we only support a reduced set of the REV_CODE_PROCESSOR id
encoded in the board revision, define the PROCESSOR_ID values
as an enum. We can simplify the board_soc_type and cores_count
methods.

Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-7-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01 15:31:01 +01:00
Philippe Mathieu-Daudé aa35ec2213 hw/arm/raspi: Use more specific machine names
Now that we can instantiate different machines based on their
board_rev register value, we can have various raspi2 and raspi3.

In commit fc78a990ec we corrected the machine description.
Correct the machine names too. For backward compatibility, add
an alias to the previous generic name.

Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01 15:31:01 +01:00
Philippe Mathieu-Daudé f0eeb4b615 hw/arm/raspi: Avoid using TypeInfo::class_data pointer
Using class_data pointer to create a MachineClass is not
the recommended way anymore. The correct way is to open-code
the MachineClass::fields in the class_init() method.

We can not use TYPE_RASPI_MACHINE::class_base_init() because
it is called *before* each machine class_init(), therefore the
board_rev field is not populated. We have to manually call
raspi_machine_class_common_init() for each machine.

This partly reverts commit a03bde3674.

Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01 15:31:01 +01:00
Philippe Mathieu-Daudé 0f15c6e338 hw/arm/raspi: Move arm_boot_info structure to RaspiMachineState
The arm_boot_info structure belong to the machine,
move it to RaspiMachineState.

Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01 15:31:01 +01:00
Philippe Mathieu-Daudé 02058e4b40 hw/arm/raspi: Load the firmware on the first core
The 'first_cpu' is more a QEMU accelerator-related concept
than a variable the machine requires to use.
Since the machine is aware of its CPUs, directly use the
first one to load the firmware.

Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01 15:31:01 +01:00
Philippe Mathieu-Daudé 62f06f7137 hw/arm/raspi: Display the board revision in the machine description
Display the board revision in the machine description.

Before:

  $ qemu-system-aarch64 -M help | fgrep raspi
  raspi2               Raspberry Pi 2B
  raspi3               Raspberry Pi 3B

After:

  raspi2               Raspberry Pi 2B (revision 1.1)
  raspi3               Raspberry Pi 3B (revision 1.2)

Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200924111808.77168-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01 15:31:01 +01:00
Philippe Mathieu-Daudé e79f01f3ae hw/arm/raspi: Remove ignore_memory_transaction_failures on the raspi2
Commit 1c3db49d39 added the raspi3, which uses the same peripherals
than the raspi2 (but with different ARM cores). The raspi3 was
introduced without the ignore_memory_transaction_failures flag.
Almost 2 years later, the machine is usable running U-Boot and
Linux.
In commit 00cbd5bd74 we mapped a lot of unimplemented devices,
commit d442d95f added thermal block and commit 0e5bbd7406 the
system timer.
As we are happy with the raspi3, let's remove this flag on the
raspi2.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200921034729.432931-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01 15:31:00 +01:00
Philippe Mathieu-Daudé 8c1e992790 hw/arm/bcm2835: Add more unimplemented peripherals
The bcm2835-v3d is used since Linux 4.7, see commit
49ac67e0c39c ("ARM: bcm2835: Add VC4 to the device tree"),
and the bcm2835-txp since Linux 4.19, see commit
b7dd29b401f5 ("ARM: dts: bcm283x: Add Transposer block").

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20200921034729.432931-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-01 15:31:00 +01:00
Gerd Hoffmann 06d2dd4911 arm: use acpi_dsdt_add_gpex
Fill gpex config struct from memory map, then call the new
acpi_dsdt_add_gpex helper function.  No functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-4-kraxel@redhat.com
2020-09-30 11:29:56 +02:00
Gerd Hoffmann 52f5903a27 move MemMapEntry
It is defined twice already.  Move to a common header file to
remove duplication and make it available to everybody.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-2-kraxel@redhat.com
2020-09-30 11:29:56 +02:00
BALATON Zoltan 617160c9e1 load_elf: Remove unused address variables from callers
Several callers of load_elf() pass pointers for lowaddr and highaddr
parameters which are then not used for anything. This may stem from a
misunderstanding that load_elf need a value here but in fact it can
take NULL to ignore these values. Remove such unused variables and
pass NULL instead from callers that don't need these.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20200705174020.BDD0174633F@zero.eik.bme.hu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-25 16:52:08 -07:00
Eduardo Habkost f93a83c004 xlnx-zcu102: Register properties as class properties
Class properties make QOM introspection simpler and easier, as
they don't require an object to be instantiated.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200921221045.699690-20-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-22 16:48:29 -04:00
Daniel P. Berrangé efba15959c qom: simplify object_find_property / object_class_find_property
When debugging QEMU it is often useful to put a breakpoint on the
error_setg_internal method impl.

Unfortunately the object_property_add / object_class_property_add
methods call object_property_find / object_class_property_find methods
to check if a property exists already before adding the new property.

As a result there are a huge number of calls to error_setg_internal
on startup of most QEMU commands, making it very painful to set a
breakpoint on this method.

Most callers of object_find_property and object_class_find_property,
however, pass in a NULL for the Error parameter. This simplifies the
methods to remove the Error parameter entirely, and then adds some
new wrapper methods that are able to raise an Error when needed.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200914135617.1493072-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-22 16:45:16 -04:00
Eduardo Habkost 8063396bf3 Use OBJECT_DECLARE_SIMPLE_TYPE when possible
This converts existing DECLARE_INSTANCE_CHECKER usage to
OBJECT_DECLARE_SIMPLE_TYPE when possible.

$ ./scripts/codeconverter/converter.py -i \
  --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20200916182519.415636-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18 14:12:32 -04:00
Eduardo Habkost a489d1951c Use OBJECT_DECLARE_TYPE when possible
This converts existing DECLARE_OBJ_CHECKERS usage to
OBJECT_DECLARE_TYPE when possible.

 $ ./scripts/codeconverter/converter.py -i \
   --pattern=AddObjectDeclareType $(git grep -l '' -- '*.[ch]')

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20200916182519.415636-5-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18 14:12:32 -04:00
Peter Maydell e883b492c2 Aspeed patches :
* Couple of cleanups
 * New machine properties to define the flash models
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAl9kYGcACgkQUaNDx8/7
 7KF8ZhAAz1sMrIMCfMovyO+MOIo2ejCDzbCamPulme8GctKf+E3yJ+BTtYkyuxJk
 8VxmvFe730KNYC/eUaxddqvFlNDkWbbsoN0YrzqOz1pJKvy7HLUzVt8cX68vcC7i
 K+uKdUh1uCf8SRVOdPXrfjbpRE48OZDQEmwfd+Dd+zm/J3LO/z+c3UK2ZvUSidZ7
 LefiZYdAAqKLkjr+bVRuuWl92+ZXU1hotciac291CArJ+UaKrHF2WgUYq/SmB0Cr
 Bmtl1E5Be2DqvfiIjcJw8/vhE4pGgZEjr8vhLQatxonH4LBKhQVX0KedmmgAheuH
 J49TgrKV+s5cMw6XDfJv5h29FgDxM07Te0y1Os8R8GpWJEVQ3JB6u3FFYpGxywBz
 u/zRtZRZMDVrnNzUdl/FsYauD167hhVUn9LfVy7DTTv+Vi49NwGy3+Tl/rakUxgq
 YjEw99kDaBAWimW/CX40R9qodshxQ4pzN+1C4i6qWdXCFL9xJVXxOwGVlDg7BqGq
 uw6FRGC9sv7qp22PIGBv5sHL1YWSgMZtJpHaruBPDKom0zeI6rvjIm7ZlXONnTXj
 Fo4xW/JJVqL0+e0gAsChgeTA89zWXGPx72IFs+I7nPMRkDdmtBqQwSd0zSh3VaCJ
 bhOixgDhaFhKzKIdOHzDrCj413NoYM/NhDzC4U0Rx0nZKuMsmZk=
 =jN+V
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20200918' into staging

Aspeed patches :

* Couple of cleanups
* New machine properties to define the flash models

# gpg: Signature made Fri 18 Sep 2020 08:23:19 BST
# gpg:                using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B  0B60 51A3 43C7 CFFB ECA1

* remotes/legoater/tags/pull-aspeed-20200918:
  misc: aspeed_scu: Update AST2600 silicon id register
  hw/arm/aspeed: Add machine properties to define the flash models
  hw/arm/aspeed: Map the UART5 device unconditionally

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-18 13:36:42 +01:00
Cédric Le Goater 9820e52fbe hw/arm/aspeed: Add machine properties to define the flash models
Some machines don't have much differences a part from the flash model
being used. Introduce new machine properties to change them from the
command line.

For instance, to start the ast2500-evb machine with a different FMC
chip and a 64M SPI chip, use :

  -M ast2500-evb,fmc-model=mx25l25635e,spi-model=mx66u51235f

Cc: 郁雷 <yulei.sh@bytedance.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Lei YU <yulei.sh@bytedance.com>
Message-Id: <20200915054859.2338477-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-09-18 09:04:36 +02:00
Philippe Mathieu-Daudé a6b2f1fc36 hw/arm/aspeed: Map the UART5 device unconditionally
The UART5 is present on the machine regardless there is a
character device connected to it. Map it unconditionally.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200905212415.760452-1-f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-09-18 09:04:36 +02:00
Gerd Hoffmann 7bf2567c12 acpi: move acpi_dsdt_add_power_button() to ged
Allow reuse for microvm.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200915120909.20838-7-kraxel@redhat.com
2020-09-17 14:16:19 +02:00
Havard Skinnemoen 2ddae9cc04 hw/arm/npcm7xx: add board setup stub for CPU and UART clocks
When booting directly into a kernel, bypassing the boot loader, the CPU and
UART clocks are not set up correctly. This makes the system appear very
slow, and causes the initrd boot test to fail when optimization is off.

The UART clock must run at 24 MHz. The default 25 MHz reference clock
cannot achieve this, so switch to PLL2/2 @ 480 MHz, which works
perfectly with the default /20 divider.

The CPU clock should run at 800 MHz, so switch it to PLL1/2. PLL1 runs
at 800 MHz by default, so we need to double the feedback divider as well
to make it run at 1600 MHz (so PLL1/2 runs at 800 MHz).

We don't bother checking for PLL lock because we know our emulated PLLs
lock instantly.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-13-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14 14:24:59 +01:00
Havard Skinnemoen 0eb73f2346 hw/arm: Wire up BMC boot flash for npcm750-evb and quanta-gsj
This allows these NPCM7xx-based boards to boot from a flash image, e.g.
one built with OpenBMC. For example like this:

IMAGE=${OPENBMC}/build/tmp/deploy/images/gsj/image-bmc
qemu-system-arm -machine quanta-gsj -nographic \
	-drive file=${IMAGE},if=mtd,bus=0,unit=0,format=raw,snapshot=on

Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200911052101.2602693-12-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14 14:24:59 +01:00
Havard Skinnemoen b821242c7b hw/ssi: NPCM7xx Flash Interface Unit device model
This implements a device model for the NPCM7xx SPI flash controller.

Direct reads and writes, and user-mode transactions have been tested in
various modes. Protection features are not implemented yet.

All the FIU instances are available in the SoC's address space,
regardless of whether or not they're connected to actual flash chips.

Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-11-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14 14:24:59 +01:00
Havard Skinnemoen 1351f89246 hw/mem: Stubbed out NPCM7xx Memory Controller model
This just implements the bare minimum to cause the boot block to skip
memory initialization.

Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-10-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14 14:24:59 +01:00
Havard Skinnemoen c752bb079b hw/nvram: NPCM7xx OTP device model
This supports reading and writing OTP fuses and keys. Only fuse reading
has been tested. Protection is not implemented.

Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-9-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14 14:24:59 +01:00
Havard Skinnemoen 4e89ccd685 hw/arm: Load -bios image as a boot ROM for npcm7xx
If a -bios option is specified on the command line, load the image into
the internal ROM memory region, which contains the first instructions
run by the CPU after reset.

If -bios is not specified, the vbootrom included with qemu is loaded by
default.

Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-8-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14 14:24:59 +01:00
Havard Skinnemoen b773acf4a6 hw/arm: Add two NPCM7xx-based machines
This adds two new machines, both supported by OpenBMC:

  - npcm750-evb: Nuvoton NPCM750 Evaluation Board.
  - quanta-gsj: A board with a NPCM730 chip.

They rely on the NPCM7xx SoC device to do the heavy lifting. They are
almost completely identical at the moment, apart from the SoC type,
which currently only changes the reset contents of one register
(GCR.MDLR), but they might grow apart a bit more as more functionality
is added.

Both machines can boot the Linux kernel into /bin/sh.

Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-6-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14 14:24:58 +01:00
Havard Skinnemoen 2d8f048c25 hw/arm: Add NPCM730 and NPCM750 SoC models
The Nuvoton NPCM7xx SoC family are used to implement Baseboard
Management Controllers in servers. While the family includes four SoCs,
this patch implements limited support for two of them: NPCM730 (targeted
for Data Center applications) and NPCM750 (targeted for Enterprise
applications).

This patch includes little more than the bare minimum needed to boot a
Linux kernel built with NPCM7xx support in direct-kernel mode:

  - Two Cortex-A9 CPU cores with built-in periperhals.
  - Global Configuration Registers.
  - Clock Management.
  - 3 Timer Modules with 5 timers each.
  - 4 serial ports.

The chips themselves have a lot more features, some of which will be
added to the model at a later stage.

Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-5-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14 14:24:58 +01:00
Havard Skinnemoen e5a7ba8788 hw/misc: Add NPCM7xx System Global Control Registers device model
Implement a device model for the System Global Control Registers in the
NPCM730 and NPCM750 BMC SoCs.

This is primarily used to enable SMP boot (the boot ROM spins reading
the SCRPAD register) and DDR memory initialization; other registers are
best effort for now.

The reset values of the MDLR and PWRON registers are determined by the
SoC variant (730 vs 750) and board straps respectively.

Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-2-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14 14:24:15 +01:00
Edgar E. Iglesias 07fe5bb537 hw/arm: versal-virt: Correct the tx/rx GEM clocks
Correct the GEMs tx/rx clocks to use the 125Mhz fixed-clock.
This matches the setup with the fixed-link 100Mbit PHY.
It also avoids the following warnings from the Linux kernel
driver:

eth0: unable to generate target frequency: 125000000 Hz

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200909174647.662864-2-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-14 14:24:15 +01:00
Peter Maydell 6d4811c4b6 hw/arm/mps2: New board model mps2-an500
Implement a model of the MPS2 with the AN500 firmware. This is
similar to the AN385, with the following differences:
 * Cortex-M7 CPU
 * PSRAM is at 0x6000_0000
 * Ethernet is at 0xa000_0000
 * No zbt_boot_ctrl remapping of the low 16K
   (but QEMU doesn't implement this anyway)
 * no "block RAM" at 0x01000000

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200903202048.15370-3-peter.maydell@linaro.org
2020-09-14 14:23:19 +01:00
Peter Maydell 897d27260a hw/arm/mps2: New board model mps2-an386
Implement a model of the MPS2 with the AN386 firmware. This is
essentially identical to the AN385 firmware, but it has a
Cortex-M4 rather than a Cortex-M3.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200903202048.15370-2-peter.maydell@linaro.org
2020-09-14 14:23:19 +01:00
Peter Maydell f00f57f344 This PR includes multiple fixes and features for RISC-V:
- Fixes a bug in printing trap causes
  - Allows 16-bit writes to the SiFive test device. This fixes the
    failure to reboot the RISC-V virt machine
  - Support for the Microchip PolarFire SoC and Icicle Kit
  - A reafactor of RISC-V code out of hw/riscv
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl9aa4YACgkQIeENKd+X
 cFTJjgf5ASfFIO5HqP1l80/UM5Pswyq0IROZDq0ItZa6U4EPzLXoE2N0POriIj4h
 Ds2JbMg0ORDqY0VbSxHlgYHMgJ9S6cuVOMnATsPG0d2jaJ3gSxLBu5k/1ENqe+Vw
 sSYXZv5uEAUfOFz99zbuhKHct5HzlmBFW9dVHdflUQS+cRgsSXq27mz1BvZ8xMWl
 lMhwubqdoNx0rOD3vKnlwrxaf54DcJ2IQT3BtTCjEar3tukdNaLijAuwt2hrFyr+
 IwpeFXA/NWar+mXP3M+BvcLaI33j73/ac2+S5SJuzHGp/ot5nT5gAuq3PDEjHMeS
 t6z9Exp776VXxNE2iUA5NB65Yp3/6w==
 =07oA
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging

This PR includes multiple fixes and features for RISC-V:
 - Fixes a bug in printing trap causes
 - Allows 16-bit writes to the SiFive test device. This fixes the
   failure to reboot the RISC-V virt machine
 - Support for the Microchip PolarFire SoC and Icicle Kit
 - A reafactor of RISC-V code out of hw/riscv

# gpg: Signature made Thu 10 Sep 2020 19:08:06 BST
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8  CE8F 21E1 0D29 DF97 7054

* remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits)
  hw/riscv: Sort the Kconfig options in alphabetical order
  hw/riscv: Drop CONFIG_SIFIVE
  hw/riscv: Always build riscv_hart.c
  hw/riscv: Move sifive_test model to hw/misc
  hw/riscv: Move sifive_uart model to hw/char
  hw/riscv: Move riscv_htif model to hw/char
  hw/riscv: Move sifive_plic model to hw/intc
  hw/riscv: Move sifive_clint model to hw/intc
  hw/riscv: Move sifive_gpio model to hw/gpio
  hw/riscv: Move sifive_u_otp model to hw/misc
  hw/riscv: Move sifive_u_prci model to hw/misc
  hw/riscv: Move sifive_e_prci model to hw/misc
  hw/riscv: sifive_u: Connect a DMA controller
  hw/riscv: clint: Avoid using hard-coded timebase frequency
  hw/riscv: microchip_pfsoc: Hook GPIO controllers
  hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs
  hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
  hw/net: cadence_gem: Add a new 'phy-addr' property
  hw/riscv: microchip_pfsoc: Connect a DMA controller
  hw/dma: Add SiFive platform DMA controller emulation
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	hw/riscv/trace-events
2020-09-13 20:29:35 +01:00
Peter Maydell 842038f55c trivial patches pull request 20200911
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl9b0MsSHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748UH0QAIQYMn0U5eMWREg+DOEEj2n/6h04lTeE
 K93RsaQ9OsB0cZvwZ08sGoHI6FyfPR8S5yFe5as1ykGcGyO4vNwqxxPeRvqSfgwX
 2nkldYwgkOLYsjOD+1G16f/TGJ3MWbUxyn6ta/cSVg+BhbSvMHT3SXTLQ3PB7Lvf
 1j3Y3B0BUBAjPh1sNIvBkEV1ZGlV9tqu+XviUf4hfqZOVSTsSb7prtuGVYz9GsH2
 RxEcPXQKNWei2eQET4l8otcBpV3dz0D/6sap8nAP8pz0VARn7hJXIn5f8USFHHfg
 LMWbXrB9I2bjqSmRqhGofxhGMaH2uKQvpv46MyCDel7eMENNj6F+ER2a+7J8Apy8
 vVWYg8qVA85rfxQcb7nHuDrLQiD/C1o1uZcV1O/Mwkm7typUcpPn00pQLxhEDf9O
 xta1/EU8X+7kgTIKWMwpC0HwponOfHiG1TCyzbQ91FiTb/peeOzejTQi88YRNZFV
 NEg1XIo79Q/no05F/j3nrju2ESzBQTA1F+Jms8aI6Q40nXPaXEjg7IA510os7Py7
 uCEtoQ7qEM4lHfuSl67AR2J/NVWlWbZDsjqhxiMsYLR85rkARIf/7fsVIi9ELKOQ
 AYZdfA/LebovUcp9kDfYHPvDzifGMmv2ppD3mcZWhGuuQTJ06sRMPxQbUF6LBVMc
 64FEl8o3wFgv
 =/CqY
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging

trivial patches pull request 20200911

# gpg: Signature made Fri 11 Sep 2020 20:32:27 BST
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-5.2-pull-request:
  target/i386/kvm: Add missing fallthrough comment
  util/hexdump: Reorder qemu_hexdump() arguments
  util/hexdump: Convert to take a void pointer argument
  hw/arm/pxa2xx: Add missing fallthrough comment
  target/i386/kvm: Rename host_tsx_blacklisted() as host_tsx_broken()
  test-vmstate: remove unnecessary code in match_interval_mapping_node
  hw: hyperv: vmbus: Fix 32bit compilation
  kconfig: fix comment referring to old Makefiles
  meson.build: tweak sdl-image error message
  hw/net/e1000e: Remove duplicated write handler for FLSWDATA register
  hw/net/e1000e: Remove overwritten read handler for STATUS register
  Makefile: Skip the meson subdir in cscope/TAGS/ctags
  Makefile: Drop extra phony cscope
  hw/gpio/max7310: Replace disabled printf() by qemu_log_mask(UNIMP)
  hw/gpio/omap_gpio: Replace fprintf() by qemu_log_mask(GUEST_ERROR)
  hw/acpi/tco: Remove unused definitions
  hw/isa/isa-bus: Replace hw_error() by assert()
  hw/mips/fuloong2e: Convert pointless error message to an assert()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	net/colo-compare.c
2020-09-12 14:23:15 +01:00
Thomas Huth 5ace4cc0e8 hw/arm/pxa2xx: Add missing fallthrough comment
Let's make this file compilable with -Werror=implicit-fallthrough :
Looking at the code, it seems like the fallthrough is intended here,
so we should add the corresponding "/* fallthrough */" comment here.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200911121844.404434-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-11 21:25:59 +02:00
Bin Meng dfc388797c hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
When cadence_gem model was created for Xilinx boards, the PHY address
was hard-coded to 23 in the GEM model. Now that we have introduced a
property we can use that to tell GEM model what our PHY address is.
Change all boards' GEM 'phy-addr' property value to 23, and set the
PHY address default value to 0 in the GEM model.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1598924352-89526-13-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09 15:54:18 -07:00
Eduardo Habkost 8110fa1d94 Use DECLARE_*CHECKER* macros
Generated using:

 $ ./scripts/codeconverter/converter.py -i \
   --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-12-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-13-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09 09:27:09 -04:00
Eduardo Habkost db1015e92e Move QOM typedefs and add missing includes
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.

Patch generated using:

 $ ./scripts/codeconverter/converter.py -i \
   --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')

which will split "typdef struct { ... } TypedefName"
declarations.

Followed by:

 $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
    $(git grep -l '' -- '*.[ch]')

which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09 09:26:43 -04:00
Paolo Bonzini feabc71dfa configure: do not include dependency flags in QEMU_CFLAGS and LIBS
All Meson executables should specify their dependencies explicitly, either
directly or indirectly via declare_dependency.  Makefiles instead did
not propagate dependencies correctly from static libraries, for example.
Therefore, flags for dependencies need not be included in QEMU_CFLAGS.
LIBS is not used at all, so drop that one as well.

In a few cases the dependencies were not yet specified, so add them.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-08 11:43:16 +02:00
Peter Maydell 3dd23a4fb8 Various fixes of Aspeed machines :
* New Supermicro X11 BMC machine (Erik)
 * Fixed valid access size on AST2400 SCU
 * Improved robustness of the ftgmac100 model.
 * New flash models in m25p80 (Igor)
 * Fixed reset sequence of SDHCI/eMMC controllers
 * Improved support of the AST2600 SDMC  (Joel)
 * Couple of SMC cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAl9OQPgACgkQUaNDx8/7
 7KHzsRAAmXw6963D3wIuE2Nzb1G5Zvn6nup3AsF5Xs1IZU/cLqNijiz220KslFtQ
 y8KrTO/eyBmAsEjrg1f6bWwCTZsouKq/2vWPtmTx3eU4HgeJdPbkln7E1YGmMfBR
 T4WJU6mNqkWfFT3WAW3IbB4qCoH3l0DRkgawYPWbdJmTs5CBtXOYCT14TijDVWQ5
 p8S4QjTtfRPwG9csHJ1W93t8jadTzderefkN6Zcmf9y6iOCif6SVDFvF769hzg6e
 Pzp3xxRV3ewxhSLrGdCK+fQk/IcPaLVUnh+mM3mGLk2rDQoomFXBpaz1N94rw43s
 lGuIyLkUGiHbgONmlZMXj03WWQbgGqjYpDWme1rAKJSX6CRJRixucejsRFTG5Evx
 odgY1MGNrdg0K8L0O1SQEx7O+URZZO68WrtrMTwLbOHErE7pWAR+h5RqzclwMr3v
 0hwQxDeNjhDBj+nUwoPUjXsgfVafzeywFfKuMymnygGog5hFSWiqAFIqyxj+u6YI
 HUG8kMHdLqzAgX1NWAomn2cxUEc4Q2wxDlzUgvjcvBwa6HZD+3nrjMRStHTmeVy5
 yPKWmRanXH6xIUJoRd2dMEU6SrwGjmjfnKAbG3vgxJ6B5sk4BrfKOFeaCF9M2zP6
 ZePWf6XrsPQY7aZgQRTexmXK83jqn73DOkavI2pM9s/6Ts61mdc=
 =ZQHA
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20200901' into staging

Various fixes of Aspeed machines :

* New Supermicro X11 BMC machine (Erik)
* Fixed valid access size on AST2400 SCU
* Improved robustness of the ftgmac100 model.
* New flash models in m25p80 (Igor)
* Fixed reset sequence of SDHCI/eMMC controllers
* Improved support of the AST2600 SDMC  (Joel)
* Couple of SMC cleanups

# gpg: Signature made Tue 01 Sep 2020 13:39:20 BST
# gpg:                using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B  0B60 51A3 43C7 CFFB ECA1

* remotes/legoater/tags/pull-aspeed-20200901:
  hw: add a number of SPI-flash's of m25p80 family
  arm: aspeed: add strap define `25HZ` of AST2500
  aspeed/smc: Open AHB window of the second chip of the AST2600 FMC controller
  aspeed/sdmc: Simplify calculation of RAM bits
  aspeed/sdmc: Allow writes to unprotected registers
  aspeed/sdmc: Perform memory training
  ftgmac100: Improve software reset
  ftgmac100: Fix integer overflow in ftgmac100_do_tx()
  ftgmac100: Check for invalid len and address before doing a DMA transfer
  ftgmac100: Change interrupt status when a DMA error occurs
  ftgmac100: Fix interrupt status "Packet moved to RX FIFO"
  ftgmac100: Fix interrupt status "Packet transmitted on ethernet"
  ftgmac100: Fix registers that can be read
  aspeed/sdhci: Fix reset sequence
  aspeed/smc: Fix max_slaves of the legacy SMC device
  aspeed/smc: Fix MemoryRegionOps definition
  hw/arm/aspeed: Add board model for Supermicro X11 BMC
  aspeed/scu: Fix valid access size on AST2400
  m25p80: Add support for n25q512ax3
  m25p80: Return the JEDEC ID twice for mx25l25635e

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-03 14:12:48 +01:00
Peter Maydell 8d90bfc5c3 target-arm queue:
* Implement fp16 support for AArch32 VFP and Neon
  * hw/arm/sbsa-ref: add "reg" property to DT cpu nodes
  * hw/arm/sbsa-ref : Add embedded controller in secure memory
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAl9OZgMZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3uRfD/4kjn9wRlcHJkFYajL6nk1f
 6CI8CAeb6Fv2+snzcDfbutqC1jdL2V9qeojsq6K1L/k59rQgOlBJNJCWNB06KLWq
 /kbmK6Wa0jTscMTf2Kzo5USUFK9TckrHcpAzAYzPTtJdIVDZOJ01npmaxwRvoQ5V
 D84VVfKs73Pkpn1PwBVAVpOjn3VeE01vK+A+71kj0Jo9cPoyzqL/ObmJmjVI1MjP
 aEMRHDvQLl+Co59jjWYOWKyAEPhofo9mDVmCjDapHGppeAWH6E81AJYF6sG8K08Y
 VJutzsJbe9o9limkVzAGj2Z/i5lFCyX49NL0YBUO2iwDpNd2ijxDUUy+s4rLGyMK
 ehkgFjXp7qm91R5RAf/xkBtvTbEbQm/tbyYxGdnjN/Vpknpl1hk9O0QW6ItOqZUC
 FGZbvzn1fdT4xG7bWsaFmy1fwX8nwLPmCeKclQlnpGaBoai9b1Xu/au8QUku82Kb
 lNfhJeJLe8UiQvNHXmMZvDYGHIICAQApmuPEPjspsAmHYIJWWVPtq18A3Ac8jZ3a
 D1dq7sZqPD/7Lwl9Bci0froAioUhgaJgT4WCv4irhzpRjvz5ftN4D+iq41edoTQb
 XGLabaj9cXQqYD87uSB42+aHlCq3a+i+FOrh/NDKZb/tn8eaT/IKjSkl1LF6lbu/
 8yyMd3mncxFtRxtN9t1AXw==
 =NZ+q
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200901' into staging

target-arm queue:
 * Implement fp16 support for AArch32 VFP and Neon
 * hw/arm/sbsa-ref: add "reg" property to DT cpu nodes
 * hw/arm/sbsa-ref : Add embedded controller in secure memory

# gpg: Signature made Tue 01 Sep 2020 16:17:23 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200901: (47 commits)
  hw/arm/sbsa-ref : Add embedded controller in secure memory
  hw/misc/sbsa_ec : Add an embedded controller for sbsa-ref
  hw/arm/sbsa-ref: add "reg" property to DT cpu nodes
  target/arm: Enable FP16 in '-cpu max'
  target/arm: Implement fp16 for Neon VMUL, VMLA, VMLS
  target/arm/vec_helper: Add gvec fp indexed multiply-and-add operations
  target/arm/vec_helper: Handle oprsz less than 16 bytes in indexed operations
  target/arm: Implement fp16 for Neon VRINTX
  target/arm: Implement fp16 for Neon VRINT-with-specified-rounding-mode
  target/arm: Implement fp16 for Neon VCVT with rounding modes
  target/arm: Implement fp16 for Neon VCVT fixed-point
  target/arm: Convert Neon VCVT fixed-point to gvec
  target/arm: Implement fp16 for Neon float-integer VCVT
  target/arm: Implement fp16 for Neon pairwise fp ops
  target/arm: Implement fp16 for Neon VRSQRTS
  target/arm: Implement fp16 for Neon VRECPS
  target/arm: Implement fp16 for Neon fp compare-vs-0
  target/arm: Implement fp16 for Neon VFMA, VMFS
  target/arm: Implement fp16 for Neon VMLA, VMLS operations
  target/arm: Implement fp16 for Neon VMAXNM, VMINNM
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-01 16:51:37 +01:00
Graeme Gregory 3f462bf0f6 hw/arm/sbsa-ref : Add embedded controller in secure memory
Add the previously created sbsa-ec device to the sbsa-ref machine in
secure memory so the PSCI implementation in ARM-TF can access it, but
not expose it to non secure firmware or OS except by via ARM-TF.

Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Tested-by: Leif Lindholm <leif@nuviainc.com>
Message-id: 20200826141952.136164-3-graeme@nuviainc.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-01 14:01:34 +01:00
Leif Lindholm 999f6ebde5 hw/arm/sbsa-ref: add "reg" property to DT cpu nodes
The sbsa-ref platform uses a minimal device tree to pass amount of memory
as well as number of cpus to the firmware. However, when dumping that
minimal dtb (with -M sbsa-virt,dumpdtb=<file>), the resulting blob
generates a warning when decompiled by dtc due to lack of reg property.

Add a simple reg property per cpu, representing a 64-bit MPIDR_EL1.

This also ends up being cleaner than having the firmware calculating its
own IDs for generating APCI.

Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200827124335.30586-1-leif@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-01 13:22:07 +01:00
Erik Smit 40a38df55e hw/arm/aspeed: Add board model for Supermicro X11 BMC
The BMC Firmware can be downloaded from :

  https://www.supermicro.com/en/products/motherboard/X11SSL-F

Signed-off-by: Erik Smit <erik.lucas.smit@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: Prettified Erik's name in email
       Modified commit log ]
Message-Id: <20200715173418.186-1-erik.lucas.smit@gmail.com>
Message-Id: <20200819100956.2216690-6-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-09-01 14:21:50 +02:00
Chen Qun aa139a7cd0 hw/arm/omap1:Remove redundant statement in omap_clkdsp_read()
Clang static code analyzer show warning:
hw/arm/omap1.c:1760:15: warning: Value stored to 'cpu' during its
initialization is never read
    CPUState *cpu = CPU(s->cpu);
              ^~~   ~~~~~~~~~~~

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20200827110311.164316-3-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-01 11:53:44 +02:00
Chen Qun b3b0e81458 hw/arm/virt-acpi-build:Remove dead assignment in build_madt()
Clang static code analyzer show warning:
hw/arm/virt-acpi-build.c:641:5: warning: Value stored to 'madt' is never read
    madt = acpi_data_push(table_data, sizeof *madt);
    ^      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200827110311.164316-2-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-01 11:52:25 +02:00
Peter Maydell ea1bb830cb target-arm queue:
* target/arm: Cleanup and refactoring preparatory to SVE2
  * armsse: Define ARMSSEClass correctly
  * hw/misc/unimp: Improve information provided in log messages
  * hw/qdev-clock: Avoid calling qdev_connect_clock_in after DeviceRealize
  * hw/arm/xilinx_zynq: Call qdev_connect_clock_in() before DeviceRealize
  * hw/net/allwinner-sun8i-emac: Use AddressSpace for DMA transfers
  * hw/sd/allwinner-sdhost: Use AddressSpace for DMA transfers
  * target/arm: Fill in the WnR syndrome bit in mte_check_fail
  * target/arm: Clarify HCR_EL2 ARMCPRegInfo type
  * hw/arm/musicpal: Use AddressSpace for DMA transfers
  * hw/clock: Minor cleanups
  * hw/arm/sbsa-ref: fix typo breaking PCIe IRQs
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAl9IzPYZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3u0ND/9BvrjVquzqD83keJkZe8e1
 txQK2bdHHili/kGoJRXeWdca5wtmlKMcHUw5dUHfgUrQo3p3hDw2P0jWB39Pqbz4
 Uoc1M1fMMckV/wygpRIXzB6Y6+kTOc3E+xY+6xreXQHNl/Fv+nkATVwbHX1rKxcg
 SGIyjHRB8DiiQ8s1Szhyr6+jr/FVN5xHHHt+DSArYoM0UoXNyzzdrUzcTA1c5AfS
 lBH5Slz+rLLHoN1rmycb//X1CZ+hAv0jZl9O8+70S1aOLIuin3YewEBDfV+sEo88
 P9qfhdRer1j/HwRa00R30g86z2FgoSFqyewX96SetuhoUz4EH8TZb5NIpKWONbai
 PhWl4Bul6xXS051AARoewbNcXZ9scFXNc4BYQEW4EkTgX3J2AekN3m8HncuoNWAm
 w8MEFgGKDqD/CoAKTNHtZKnP8Iwz/8widGjFe86bzzBsM2OWi7VT+ApdSxtom95z
 5CNFpQDPGc7p4hDgGPXR3pvuRSbOT04E/rs4JF7R9TQAFWDESPWSyi3HvULFTC+Y
 7W4iwSl0WNXLUGoZTIZ4EIf6MaGVRcjJNWWb4dXpZzN9c13o70uknRGu+kma08Ic
 kZO3jF/W1tFEsAeI+hJeTQk7oEFn7YL8S7D6X+77sdy9JI8Csr6rqHUBJmcMIaJJ
 78vsbH079zJbuVIV2f3p6g==
 =YCxD
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200828' into staging

target-arm queue:
 * target/arm: Cleanup and refactoring preparatory to SVE2
 * armsse: Define ARMSSEClass correctly
 * hw/misc/unimp: Improve information provided in log messages
 * hw/qdev-clock: Avoid calling qdev_connect_clock_in after DeviceRealize
 * hw/arm/xilinx_zynq: Call qdev_connect_clock_in() before DeviceRealize
 * hw/net/allwinner-sun8i-emac: Use AddressSpace for DMA transfers
 * hw/sd/allwinner-sdhost: Use AddressSpace for DMA transfers
 * target/arm: Fill in the WnR syndrome bit in mte_check_fail
 * target/arm: Clarify HCR_EL2 ARMCPRegInfo type
 * hw/arm/musicpal: Use AddressSpace for DMA transfers
 * hw/clock: Minor cleanups
 * hw/arm/sbsa-ref: fix typo breaking PCIe IRQs

# gpg: Signature made Fri 28 Aug 2020 10:23:02 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200828: (35 commits)
  target/arm: Convert sq{, r}dmulh to gvec for aa64 advsimd
  target/arm: Convert integer multiply-add (indexed) to gvec for aa64 advsimd
  target/arm: Convert integer multiply (indexed) to gvec for aa64 advsimd
  target/arm: Generalize inl_qrdmlah_* helper functions
  target/arm: Tidy SVE tszimm shift formats
  target/arm: Split out gen_gvec_ool_zz
  target/arm: Split out gen_gvec_ool_zzz
  target/arm: Split out gen_gvec_ool_zzp
  target/arm: Merge helper_sve_clr_* and helper_sve_movz_*
  target/arm: Split out gen_gvec_ool_zzzp
  target/arm: Use tcg_gen_gvec_bitsel for trans_SEL_pppp
  target/arm: Clean up 4-operand predicate expansion
  target/arm: Merge do_vector2_p into do_mov_p
  target/arm: Rearrange {sve,fp}_check_access assert
  target/arm: Split out gen_gvec_fn_zzz, do_zzz_fn
  target/arm: Split out gen_gvec_fn_zz
  qemu/int128: Add int128_lshift
  armsse: Define ARMSSEClass correctly
  hw/misc/unimp: Display the offset with width of the region size
  hw/misc/unimp: Display the value with width of the access size
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28 15:14:40 +01:00
Peter Maydell 3e39dac035 Machine queue + QOM fixes and cleanups
Bug fix:
 * numa: hmat: fix cache size check (Igor Mammedov)
 
 QOM fixes and cleanups:
 * Move QOM macros and typedefs to header files
 * Use TYPE_* constants on TypeInfo structs
 * Rename QOM type checking macros for consistency
 * Rename enum values and typedefs that conflict with QOM
   type checking amcros
 * Fix typos on QOM type checking macros
 * Delete unused QOM type checking macros that use
   non-existing typedefs
 * hvf: Add missing include
 * xen-legacy-backend: Add missing typedef XenLegacyDevice
 -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEEWjIv1avE09usz9GqKAeTb5hNxaYFAl9IB2UUHGVoYWJrb3N0
 QHJlZGhhdC5jb20ACgkQKAeTb5hNxaaLcA//RRqE3DOpAqUSDnaPHAVy7UDyjUwN
 1uytGKafNIBytuRmMxK76y2kez/URFxyisdWY91I7KF58S+2unggzSQF59AFt/4W
 VqSLnZxLy22xKaUBQq14VJIa4CxSOg+FfJHhLsBt2gRxbuRbvnScYcFnmZW1b/AB
 hfuibtj5m22/dMKpKquUV0xmC9JAAJqDAzwz88WA2Ybi8wqGc/6tnCQHfVG/4fsF
 TGcIn+0UzfsQlYQ+RmJYaA8FPKOjsjbHMixw3j0MfTTVLMLlqQWJaTreIvipXvC2
 Fo5S2aFBTcsoG5WIT49wbLCL2UbwiHULOC665qBy6bun/EJhhTYe4dq0zM5oTZp/
 LOT6U9BZxdLKQv53HfLDq0fWEKp05/6HZnTcwX6fG8Fi1c06aD7fQgOlwva+3sI6
 F/CuoNrbnZrwtVxi2v3lrGaUrggLZbEs33v5kieeYyszhE+gupDO5nG6zboSM0pf
 UBKHCr/5oMb8U0wEchY7/cDcZtuiMGoFNhsInE41edyA7Ss8OY+R85HQaltMrMJr
 dGnuAMEBOIOaFrJGrK5rwfBqhC4Qv4Ditrj4pJA+GAXNy3buW/TsBFJh1Pm9iiZR
 WwQHjj6kQdFJm+QgmPace3qA1+Pc8JzS44QfFO4JEkHb+/px+4icNSbcsqOxtlY2
 GdJV9NuE94Mf3W0=
 =lK8z
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

Machine queue + QOM fixes and cleanups

Bug fix:
* numa: hmat: fix cache size check (Igor Mammedov)

QOM fixes and cleanups:
* Move QOM macros and typedefs to header files
* Use TYPE_* constants on TypeInfo structs
* Rename QOM type checking macros for consistency
* Rename enum values and typedefs that conflict with QOM
  type checking amcros
* Fix typos on QOM type checking macros
* Delete unused QOM type checking macros that use
  non-existing typedefs
* hvf: Add missing include
* xen-legacy-backend: Add missing typedef XenLegacyDevice

# gpg: Signature made Thu 27 Aug 2020 20:20:05 BST
# gpg:                using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg:                issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request: (53 commits)
  dc390: Use TYPE_DC390_DEVICE constant
  ppce500: Use TYPE_PPC_E500_PCI_BRIDGE constant
  tosa: Use TYPE_TOSA_MISC_GPIO constant
  xlnx-zcu102: Use TYPE_ZCU102_MACHINE constant
  sclpconsole: Use TYPE_* constants
  amd_iommu: Use TYPE_AMD_IOMMU_PCI constant
  nios2_iic: Use TYPE_ALTERA_IIC constant
  etsec: Use TYPE_ETSEC_COMMON constant
  migration: Rename class type checking macros
  swim: Rename struct SWIM to Swim
  s390-virtio-ccw: Rename S390_MACHINE_CLASS macro
  nubus: Rename class type checking macros
  vfio/pci: Move QOM macros to header
  kvm: Move QOM macros to kvm.h
  mptsas: Move QOM macros to header
  pxa2xx: Move QOM macros to header
  rocker: Move QOM macros to header
  auxbus: Move QOM macros to header
  piix: Move QOM macros to header
  virtio-serial-bus: Move QOM macros to header
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28 11:05:08 +01:00
Eduardo Habkost 512c65e62e armsse: Define ARMSSEClass correctly
TYPE_ARM_SSE is a TYPE_SYS_BUS_DEVICE subclass, but
ARMSSEClass::parent_class is declared as DeviceClass.

It never caused any problems by pure luck:

We were not setting class_size for TYPE_ARM_SSE, so class_size of
TYPE_SYS_BUS_DEVICE was being used (sizeof(SysBusDeviceClass)).
This made the system allocate enough memory for TYPE_ARM_SSE
devices even though ARMSSEClass was too small for a sysbus
device.

Additionally, the ARMSSEClass::info field ended up at the same
offset as SysBusDeviceClass::explicit_ofw_unit_address.  This
would make sysbus_get_fw_dev_path() crash for the device.
Luckily, sysbus_get_fw_dev_path() never gets called for
TYPE_ARM_SSE devices, because qdev_get_fw_dev_path() is only used
by the boot device code, and TYPE_ARM_SSE devices don't appear at
the fw_boot_order list.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 20200826181006.4097163-1-ehabkost@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28 10:02:47 +01:00
Philippe Mathieu-Daudé 3ab9287895 hw/arm/xilinx_zynq: Call qdev_connect_clock_in() before DeviceRealize
Clock canonical name is set in device_set_realized (see the block
added to hw/core/qdev.c in commit 0e6934f264).
If we connect a clock after the device is realized, this code is
not executed. This is currently not a problem as this name is only
used for trace events, however this disrupt tracing.

Fix by calling qdev_connect_clock_in() before realizing.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200803105647.22223-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28 10:02:45 +01:00
Philippe Mathieu-Daudé 31a171cc8b hw/arm/xilinx_zynq: Uninline cadence_uart_create()
As we want to call qdev_connect_clock_in() before the device
is realized, we need to uninline cadence_uart_create() first.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200803105647.22223-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28 10:02:45 +01:00
Philippe Mathieu-Daudé 4757cb8579 hw/net/allwinner-sun8i-emac: Use AddressSpace for DMA transfers
Allow the device to execute the DMA transfers in a different
AddressSpace.

The H3 SoC keeps using the system_memory address space,
but via the proper dma_memory_access() API.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200814122907.27732-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28 10:02:45 +01:00
Philippe Mathieu-Daudé b3aec952bf hw/sd/allwinner-sdhost: Use AddressSpace for DMA transfers
Allow the device to execute the DMA transfers in a different
AddressSpace.

The A10 and H3 SoC keep using the system_memory address space,
but via the proper dma_memory_access() API.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200814110057.307-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28 10:02:45 +01:00
Philippe Mathieu-Daudé 79ed6fd650 hw/arm/musicpal: Use AddressSpace for DMA transfers
Allow the device to execute the DMA transfers in a different
AddressSpace.

We keep using the system_memory address space, but via the
proper dma_memory_access() API.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200814125533.4047-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28 10:02:44 +01:00
Graeme Gregory 870f0051b4 hw/arm/sbsa-ref: fix typo breaking PCIe IRQs
Fixing a typo in a previous patch that translated an "i" to a 1
and therefore breaking the allocation of PCIe interrupts. This was
discovered when virtio-net-pci devices ceased to function correctly.

Cc: qemu-stable@nongnu.org
Fixes: 48ba18e6d3 ("hw/arm/sbsa-ref: Simplify by moving the gic in the machine state")
Signed-off-by: Graeme Gregory <graeme@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200821083853.356490-1-graeme@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28 10:02:43 +01:00
Eduardo Habkost c58a7deff8 tosa: Use TYPE_TOSA_MISC_GPIO constant
This will make future conversion to use OBJECT_DECLARE* easier.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20200826184334.4120620-7-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-27 14:21:48 -04:00
Eduardo Habkost 0b43132f30 xlnx-zcu102: Use TYPE_ZCU102_MACHINE constant
This will make future conversion to use OBJECT_DECLARE* easier.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20200826184334.4120620-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-27 14:21:48 -04:00
Eduardo Habkost 2d8eb5f85f pxa2xx: Move QOM macros to header
This will make future conversion to OBJECT_DECLARE* easier.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-By: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200825192110.3528606-40-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-27 14:04:55 -04:00
Eduardo Habkost 8055340fa5 armsse: Rename QOM macros to avoid conflicts
Rename TYPE_ARMSSE to TYPE_ARM_SSE, and ARMSSE*() type checking
macros to ARM_SSE*().

This will avoid a future conflict between an ARM_SSE() type
checking macro and the ARMSSE typedef name.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-By: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200825192110.3528606-26-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-27 14:04:54 -04:00
Eduardo Habkost 347df6f876 aspeed_soc: Rename memmap/irqmap enum constants
Some of the enum constant names conflict with the QOM type check
macros:

ASPEED_GPIO
ASPEED_I2C
ASPEED_RTC
ASPEED_SCU
ASPEED_SDHCI
ASPEED_SDMC
ASPEED_VIC
ASPEED_WDT
ASPEED_XDMA

This needs to be addressed to allow us to transform the QOM type
check macros into functions generated by OBJECT_DECLARE_TYPE().

Rename all the constants to ASPEED_DEV_*, to avoid conflicts.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-By: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200825192110.3528606-7-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-27 14:04:54 -04:00
Eduardo Habkost 4af44e1eca allwinner-h3: Rename memmap enum constants
Some of the enum constant names conflict with the QOM type check
macros (AW_H3_CCU, AW_H3_SYSCTRL).  This needs to be addressed to
allow us to transform the QOM type check macros into functions
generated by OBJECT_DECLARE_TYPE().

Rename all the constants to AW_H3_DEV_*, to avoid conflicts.

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-By: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200825192110.3528606-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-27 14:04:54 -04:00
Michael S. Tsirkin 9b897b399e arm/acpi: fix an out of spec _UID for PCI root
On ARM/virt machine type QEMU currently reports an incorrect _UID in
ACPI.

The particular node in question is the primary PciRoot (PCI0 in ACPI),
which gets assigned PCI0 in ACPI UID and 0 in the
DevicePath. This is due to the _UID assigned to it by build_dsdt in
hw/arm/virt-acpi-build.c Which does not correspond to the primary PCI
identifier given by pcibus_num in hw/pci/pci.c

In UEFI v2.8, section "10.4.2 Rules with ACPI _HID and _UID" ends with
the paragraph,

    Root PCI bridges will use the plug and play ID of PNP0A03, This will
    be stored in the ACPI Device Path _HID field, or in the Expanded
    ACPI Device Path _CID field to match the ACPI name space. The _UID
    in the ACPI Device Path structure must match the _UID in the ACPI
    name space.

(See especially the last sentence.)

A similar bug has been reported on i386, on that architecture it has
been reported to confuse at least macOS which uses ACPI UIDs to build
the DevicePath for NVRAM boot options, while OVMF firmware gets them via
an internal channel through QEMU.  When UEFI firmware and ACPI have
different values, this makes the underlying operating system unable to
report its boot option.

Cc: qemu-stable@nongnu.org
Reported-by: Vitaly Cheptsov <vit9696@protonmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2020-08-27 08:27:48 -04:00
Eric Auger de206dfd80 hw/arm/smmuv3: Advertise SMMUv3.2 range invalidation
Expose the RIL bit so that the guest driver uses range
invalidation. Although RIL is a 3.2 features, We let
the AIDR advertise SMMUv3.1 support as v3.x implementation
is allowed to implement features from v3.(x+1).

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200728150815.11446-12-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24 10:02:06 +01:00
Eric Auger e7c3b9d9a0 hw/arm/smmuv3: Support HAD and advertise SMMUv3.1 support
HAD is a mandatory features with SMMUv3.1 if S1P is set, which is
our case. Other 3.1 mandatory features come with S2P which we don't
have.

So let's support HAD and advertise SMMUv3.1 support in AIDR.

HAD support allows the CD to disable hierarchical attributes, ie.
if the HAD0/1 bit is set, the APTable field of table descriptors
walked through TTB0/1 is ignored.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200728150815.11446-11-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24 10:02:06 +01:00
Eric Auger 5888f0ad12 hw/arm/smmuv3: Let AIDR advertise SMMUv3.0 support
Add the support for AIDR register. It currently advertises
SMMU V3.0 spec.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200728150815.11446-10-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24 10:02:06 +01:00
Eric Auger f0ec277cd4 hw/arm/smmuv3: Fix IIDR offset
The SMMU IIDR register is at 0x018 offset.

Fixes: 10a83cb988 ("hw/arm/smmuv3: Skeleton")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200728150815.11446-9-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24 10:02:06 +01:00
Eric Auger d52915616c hw/arm/smmuv3: Get prepared for range invalidation
Enhance the smmu_iotlb_inv_iova() helper with range invalidation.
This uses the new fields passed in the NH_VA and NH_VAA commands:
the size of the range, the level and the granule.

As NH_VA and NH_VAA both use those fields, their decoding and
handling is factorized in a new smmuv3_s1_range_inval() helper.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200728150815.11446-8-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24 10:02:06 +01:00
Eric Auger c0f9ef7037 hw/arm/smmuv3: Introduce smmuv3_s1_range_inval() helper
Let's introduce an helper for S1 IOVA range invalidation.
This will be used for NH_VA and NH_VAA commands. It decodes
the same fields, trace, calls the UNMAP notifiers and
invalidate the corresponding IOTLB entries.

At the moment, we do not support 3.2 range invalidation yet.
So it reduces to a single IOVA invalidation.

Note the leaf bit now is also decoded for the CMD_TLBI_NH_VAA
command. At the moment it is only used for tracing.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200728150815.11446-7-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24 10:02:06 +01:00
Eric Auger 9e54dee71f hw/arm/smmu-common: Manage IOTLB block entries
At the moment each entry in the IOTLB corresponds to a page sized
mapping (4K, 16K or 64K), even if the page belongs to a mapped
block. In case of block mapping this unefficiently consumes IOTLB
entries.

Change the value of the entry so that it reflects the actual
mapping it belongs to (block or page start address and size).

Also the level/tg of the entry is encoded in the key. In subsequent
patches we will enable range invalidation. This latter is able
to provide the level/tg of the entry.

Encoding the level/tg directly in the key will allow to invalidate
using g_hash_table_remove() when num_pages equals to 1.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200728150815.11446-6-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24 10:02:06 +01:00
Eric Auger a755015855 hw/arm/smmu: Introduce SMMUTLBEntry for PTW and IOTLB value
Introduce a specialized SMMUTLBEntry to store the result of
the PTW and cache in the IOTLB. This structure extends the
generic IOMMUTLBEntry struct with the level of the entry and
the granule size.

Those latter will be useful when implementing range invalidation.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200728150815.11446-5-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24 10:02:06 +01:00
Eric Auger 60a61f1b31 hw/arm/smmu: Introduce smmu_get_iotlb_key()
Introduce the smmu_get_iotlb_key() helper and the
SMMU_IOTLB_ASID() macro. Also move smmu_get_iotlb_key and
smmu_iotlb_key_hash in the IOTLB related code section.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200728150815.11446-4-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24 10:02:06 +01:00
Eric Auger 6808bca939 hw/arm/smmu-common: Add IOTLB helpers
Add two helpers: one to lookup for a given IOTLB entry and
one to insert a new entry. We also move the tracing there.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200728150815.11446-3-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24 10:02:06 +01:00
Eric Auger 1733837d7c hw/arm/smmu-common: Factorize some code in smmu_ptw_64()
Page and block PTE decoding can share some code. Let's
first handle table PTE and factorize some code shared by
page and block PTEs.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200728150815.11446-2-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-24 10:02:06 +01:00
Peter Maydell d7df0ceee0 SD/MMC patches
- Convert legacy SD host controller to the SDBus API
 - Move legacy API to a separate "sdcard_legacy.h" header
 - Introduce methods to access multiple bytes on SDBus data lines
 - Fix 'switch function' group location
 - Fix SDSC maximum card size (2GB)
 
 CI jobs result:
   https://gitlab.com/philmd/qemu/-/pipelines/180605963
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAl9ABBYACgkQ4+MsLN6t
 wN4vng/8DEiJcb6RyjXXRbY6dY+k1mPRbUCCdkkSL/20OUF7edu8FXVO/YtTemky
 /rUbG8xa/WqxLXg5TqHkmJAHbQYjPu3YfakMTaNKAQfmAukepsqaWO4T2ROKtBNf
 Muj5X0idTnMSHYNLyJ9O59FiaGMmXN/1eWYkd6QcGl5IVyQQws1Sn/2Mwm4sXinU
 jkLzYSiibho/y9Y18MzvgD22/Z4dcRmdyCenHYaVAZVOJ1DNKNpJg0nem13lva8/
 9kZbtjV0WuGX+QkNd5KUSpJQEjemRuABsPSwu+MIA/1AWDhoowAITUbMba5GpRmT
 uIylUiVpVyJAD545UB5rVMlBb86hBEp/4cpxpZ8J05qd1L8Ko/F3ECUj1WrteqK7
 Wf6p4ZtF+unGELwk/7tu9o9MiEIU5Lb8IN2cr68gQ2p50rxR1ABkJo4K7FqR9Lvk
 QkmfqAJRl/dSvh9ChDE/xRMewYm69FE7MGpg4JaeW6KZ4CTX0JwWy9LSpdjQf5AG
 uhHqGTjiZkn9kzIGMIYaRuKDqYQcnslQpKxd0lRKNMw775LI/0L3MBIc1zfLA/Sb
 uUHdADDUibQaXaTHVgkyJDU96i3STkehEhbTejo36i+Qevd6bE8j3yDu483Kt2aV
 AStMJpW+8Iuq7T2hIRaggqhcuwCIsknKU3yhvV7rwAgHxnwy4Nc=
 =Pefc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/sd-next-20200821' into staging

SD/MMC patches

- Convert legacy SD host controller to the SDBus API
- Move legacy API to a separate "sdcard_legacy.h" header
- Introduce methods to access multiple bytes on SDBus data lines
- Fix 'switch function' group location
- Fix SDSC maximum card size (2GB)

CI jobs result:
  https://gitlab.com/philmd/qemu/-/pipelines/180605963

# gpg: Signature made Fri 21 Aug 2020 18:27:50 BST
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/sd-next-20200821: (23 commits)
  hw/sd: Correct the maximum size of a Standard Capacity SD Memory Card
  hw/sd: Fix incorrect populated function switch status data structure
  hw/sd: Use sdbus_read_data() instead of sdbus_read_byte() when possible
  hw/sd: Add sdbus_read_data() to read multiples bytes on the data line
  hw/sd: Use sdbus_write_data() instead of sdbus_write_byte when possible
  hw/sd: Add sdbus_write_data() to write multiples bytes on the data line
  hw/sd: Rename sdbus_read_data() as sdbus_read_byte()
  hw/sd: Rename sdbus_write_data() as sdbus_write_byte()
  hw/sd: Rename read/write_data() as read/write_byte()
  hw/sd: Move sdcard legacy API to 'hw/sd/sdcard_legacy.h'
  hw/sd/sdcard: Make sd_data_ready() static
  hw/sd/pl181: Replace disabled fprintf()s by trace events
  hw/sd/pl181: Do not create SD card within the SD host controller
  hw/sd/pl181: Expose a SDBus and connect the SDCard to it
  hw/sd/pl181: Use named GPIOs
  hw/sd/pl181: Add TODO to use Fifo32 API
  hw/sd/pl181: Rename pl181_send_command() as pl181_do_command()
  hw/sd/pl181: Replace fprintf(stderr, "*\n") with error_report()
  hw/sd/milkymist: Do not create SD card within the SD host controller
  hw/sd/milkymist: Create the SDBus at init()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-22 23:53:08 +01:00
Peter Maydell ca489cd037 Machine queue 2020-08-19
Regular post-release changes:
 * hw: add compat machines for 5.2 (Cornelia Huck)
 
 Features:
 * qmp: Expose MachineClass::default_ram_id
   (Michal Privoznik)
 
 Cleanups:
 * qdev: Document qdev_prop_set_drive_err() return value
   (Philippe Mathieu-Daudé)
 -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEEWjIv1avE09usz9GqKAeTb5hNxaYFAl89Q5MUHGVoYWJrb3N0
 QHJlZGhhdC5jb20ACgkQKAeTb5hNxabojA//TGPJt9ahDopULyUc0sUa53r98l5N
 HovMeUh19FVRD/Iuky+CojqDJwbEqxi06O07pumqye/3wfTNhwToSfBFXZdxsM1b
 vCjeTIVeNThVLYiYMAV36Eqk8jAQnt05/HLOPE9sEa+rjt+TROb8yQwP3YjVoDgJ
 MNyEugJX/BTUV8LsN0t/fWjobWRfQLssAsS7lx6aMgE3VXsFYCPvurWUY4IOB/Yx
 zBOtI3qqHAV5+1m0509Go+bDlQFKIR2/cVdSUdul9pmxmYK3JOi5dddEhiMXbgO6
 Ko8GJVoow6Dr7WNnVRcNKj4oHBcamXS7YCl1ddNyIlOV0yxH20IFqAG4VYE1G7JG
 3eWp21W2NepX+n9KgZSaCKls8A659fkmkYG2O/Qpui4BETpdM5SRpSdAGNt0kXlA
 fXC3iEBoVYdgic5H5yssr5AicDdFRQqgA0YvwleiSc997FkTYq4GdJwK07tk5O3c
 RbfOLNurSHPzvoceU7tDeJa6T6bIF1DCuB/rUupSgKFU3njdh7OgMYaMM5vkN+MO
 dGQ+mw1/LEh5NTgLLlFRVdQBPw98WS88M7qtMQg7ZHMNt7NwP2DyeQxEiZ+0l3p/
 IL519HY0ZJgWnkH7uKf2UclmzOQ24PoKJknhBNN1QiGJUGJWk6pxeEd8xFJlokKi
 26ljxYyTzYQE8tU=
 =0wqi
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

Machine queue 2020-08-19

Regular post-release changes:
* hw: add compat machines for 5.2 (Cornelia Huck)

Features:
* qmp: Expose MachineClass::default_ram_id
  (Michal Privoznik)

Cleanups:
* qdev: Document qdev_prop_set_drive_err() return value
  (Philippe Mathieu-Daudé)

# gpg: Signature made Wed 19 Aug 2020 16:21:55 BST
# gpg:                using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg:                issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
  hw: add compat machines for 5.2
  qmp: Expose MachineClass::default_ram_id
  qdev: Document qdev_prop_set_drive_err() return value

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-22 14:37:31 +01:00
Philippe Mathieu-Daudé 26c607b86b hw/sd/pl181: Do not create SD card within the SD host controller
SD/MMC host controllers provide a SD Bus to plug SD cards,
but don't come with SD card plugged in :) Let the machine/board
model create and plug the SD cards when required.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200705204630.4133-8-f4bug@amsat.org>
2020-08-21 16:22:43 +02:00
Philippe Mathieu-Daudé 26c5b0f4cb hw/sd/pl181: Use named GPIOs
To make the code easier to manage/review/use, rename the
cardstatus[0] variable as 'card_readonly' and name the GPIO
"card-read-only".
Similarly with cardstatus[1], renamed as 'card_inserted' and
name its GPIO "card-inserted".

Adapt the users accordingly by using the qdev_init_gpio_out_named()
function.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200705204630.4133-6-f4bug@amsat.org>
2020-08-21 16:22:43 +02:00
Philippe Mathieu-Daudé d7ebca748e hw/sd/pxa2xx_mmci: Do not create SD card within the SD host controller
SD/MMC host controllers provide a SD Bus to plug SD cards,
but don't come with SD card plugged in :)

The machine/board object is where the SD cards are created.
Since the PXA2xx is not qdevified, for now create the cards
in pxa270_init() which is the SoC model.
In the future we will move this to the board model.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200705213350.24725-2-f4bug@amsat.org>
2020-08-21 16:22:43 +02:00
Marc-André Lureau 2c44220d05 meson: convert hw/arch*
Each architecture's sourceset is placed in an hw_arch dictionary, and picked up
from there when building the per-emulator static_library.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21 06:30:33 -04:00
Paolo Bonzini 243af0225a trace: switch position of headers to what Meson requires
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path.  In particular the tracing headers are using
$(build_root)/$(<D).

In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".

This patch is too ugly to be applied to the Makefiles now.  It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21 06:18:24 -04:00
Cornelia Huck 3ff3c5d317 hw: add compat machines for 5.2
Add 5.2 machine types for arm/i440fx/q35/s390x/spapr.

Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200819144016.281156-1-cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-19 10:45:48 -04:00
Peter Maydell ce4f70e81e hw/arm/nrf51_soc: Set system_clock_scale
The nrf51 SoC model wasn't setting the system_clock_scale
global.which meant that if guest code used the systick timer in "use
the processor clock" mode it would hang because time never advances.

Set the global to match the documented CPU clock speed for this SoC.

This SoC in fact doesn't have a SysTick timer (which is the only thing
currently that cares about the system_clock_scale), because it's
a configurable option in the Cortex-M0. However our Cortex-M0 and
thus our nrf51 and our micro:bit board do provide a SysTick, so
we ought to provide a functional one rather than a broken one.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200727193458.31250-1-peter.maydell@linaro.org
2020-08-03 17:55:31 +01:00
Peter Maydell fc6bb6e67e msf2-soc, stellaris: Don't wire up SYSRESETREQ
The MSF2 SoC model and the Stellaris board code both wire
SYSRESETREQ up to a function that just invokes
    qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
This is now the default action that the NVIC does if the line is
not connected, so we can delete the handling code.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200728103744.6909-4-peter.maydell@linaro.org
2020-08-03 17:55:03 +01:00
Peter Maydell e7e5a9595a hw/arm/netduino2, netduinoplus2: Set system_clock_scale
The netduino2 and netduinoplus2 boards forgot to set the system_clock_scale
global, which meant that if guest code used the systick timer in "use
the processor clock" mode it would hang because time never advances.

Set the global to match the documented CPU clock speed of these boards.
Judging by the data sheet this is slightly simplistic because the
SoC allows configuration of the SYSCLK source and frequency via the
RCC (reset and clock control) module, but we don't model that.

Fixes: https://bugs.launchpad.net/qemu/+bug/1876187
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200727162617.26227-1-peter.maydell@linaro.org
2020-08-03 17:55:03 +01:00
Richard Henderson 7ad01d78a9 hw/arm/boot: Fix MTE for EL3 direct kernel boot
When booting an EL3 cpu with -kernel, we set up EL3 and then
drop down to EL2.  We need to enable access to v8.5-MemTag
tag allocation at EL3 before doing so.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200724163853.504655-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-27 16:12:10 +01:00
Richard Henderson 24ac0d309a hw/arm/boot: Fix PAUTH for EL3 direct kernel boot
When booting an EL3 cpu with -kernel, we set up EL3 and then
drop down to EL2.  We need to enable access to v8.3-PAuth
keys and instructions at EL3 before doing so.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200724163853.504655-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-27 16:12:10 +01:00
Thomas Huth 8d942986be hw: Only compile the usb-dwc2 controller if it is really needed
The USB_DWC2 switch is currently "default y", so it is included in all
qemu-system-* builds, even if it is not needed. Even worse, it does a
"select USB", so USB devices are now showing up as available on targets
that do not support USB at all. This sysbus device should only be
included by the boards that need it, i.e. by the Raspi machines.

Fixes: 153ef1662c ("dwc-hsotg (dwc2) USB host controller emulation")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200722154719.10130-1-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-07-24 16:15:28 +02:00
Peter Maydell b50dab9eca QOM patches for 2020-07-21
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl8XDGsSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTPTYP/11AHdREDvz+KDl7AXtndxE9wo6GPGUy
 GhMSXODgOm6a4/nk4xQQR7MU+57C2IMnYbAAdrNXA3YVHjUPMURVsAeTsl9ruchC
 1JiNrtXKgaWv5P8WeNzuXcH9B7n3UZ/mV4FH8v0FhjZhsH6EHP0zOhgNScPyQurz
 AsmYN5hSoSz8jRFQ8xlNzBhNrYX5dG6fOs4M6yBRUgzaCuRcSn/+cgjngfAmcH4k
 F0KK+rBQA+KUAKYp0QUaUcbD5oj/6KaQMsfqsFROR8m+AAJrhkP2ffmcDCHfCW8A
 SQsp8k2SkdHXNgRoDJSea1TYMitCFrTBDv+MfBWOLH4ewQrGAzvsuG5o3FlnVeN7
 CKHkkxqOEifJ/vnThVBTIsqxf8/HefDXi1B5BXSKYSvnPKnnh8HCZ7VxvAsNGZiR
 epr4gEGBCcb9/bXFUmVVPz6H+lUWORzhF4P0spNJwH5BT9FLybWgJt9o4KH+pxYA
 DL4GF5vOkBgIhgUR+vn535vik7M38u6gsB8m22s2FRkZmIxTpxp9eH2ehHGSoVYM
 Yl1kVzJmFMPakl0gG1dMmM4+DJGRTHLCfBFS4pzMs9DaCNHUF3CB8FjXQs3NIFCS
 XGnChbri/wF83DEueTIrUAqF2w0XgEy55aVBOZkmFT6DXPXbx+Y3Q/AomaktBLyv
 FFUe9SfMn63P
 =HTNj
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-qom-2020-07-21' into staging

QOM patches for 2020-07-21

# gpg: Signature made Tue 21 Jul 2020 16:40:27 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qom-2020-07-21:
  qom: Make info qom-tree sort children more efficiently
  qom: Document object_get_canonical_path() returns malloced string
  qom: Change object_get_canonical_path_component() not to malloc

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-21 18:31:52 +01:00
Markus Armbruster 7a309cc95b qom: Change object_get_canonical_path_component() not to malloc
object_get_canonical_path_component() returns a malloced copy of a
property name on success, null on failure.

19 of its 25 callers immediately free the returned copy.

Change object_get_canonical_path_component() to return the property
name directly.  Since modifying the name would be wrong, adjust the
return type to const char *.

Drop the free from the 19 callers become simpler, add the g_strdup()
to the other six.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200714160202.3121879-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
2020-07-21 16:23:43 +02:00
Markus Armbruster 7ad36e2e24 hw: Mark nd_table[] misuse in realize methods FIXME
nd_table[] contains NIC configuration for boards to pick up.  Device
code has no business looking there.  Several devices do it anyway.
Two of them already have a suitable FIXME comment: "allwinner-a10" and
"msf2-soc".  Copy it to the others: "allwinner-h3", "xlnx-versal",
"xlnx,zynqmp", "sparc32-ledma", "riscv.sifive.u.soc".

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200715140440.3540942-3-armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-07-21 08:41:15 +02:00
Markus Armbruster 2b0650205b msf2: Unbreak device-list-properties for "msf-soc"
Watch this:

    $ qemu-system-aarch64 -M ast2600-evb -S -display none -qmp stdio
    {"QMP": {"version": {"qemu": {"micro": 50, "minor": 0, "major": 5}, "package": "v5.0.0-2464-g3a9163af4e"}, "capabilities": ["oob"]}}
    {"execute": "qmp_capabilities"}
    {"return": {}}
    {"execute": "device-list-properties", "arguments": {"typename": "msf2-soc"}}
    Unsupported NIC model: ftgmac100
    armbru@dusky:~/work/images$ echo $?
    1

This is what breaks "make check SPEED=slow".

Root cause is m2sxxx_soc_initfn()'s messing with nd_table[] via
qemu_check_nic_model().  That's wrong.

We fixed the exact same bug for device "allwinner-a10" in commit
8aabc5437b "hw/arm/allwinner-a10: Do not use nd_table in instance_init
function".  Fix this instance the same way: move the offending code to
m2sxxx_soc_realize(), where it's less wrong, and add a FIXME comment.

Fixes: 05b7374a58 ("msf2: Add EMAC block to SmartFusion2 SoC")
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200715140440.3540942-2-armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-07-21 08:40:54 +02:00
Peter Maydell 3f410039b7 hw/arm/armsse: Assert info->num_cpus is in-bounds in armsse_realize()
In armsse_realize() we have a loop over [0, info->num_cpus), which
indexes into various fixed-size arrays in the ARMSSE struct.  This
confuses Coverity, which warns that we might overrun those arrays
(CID 1430326, 1430337, 1430371, 1430414, 1430430).  This can't
actually happen, because the info struct is always one of the entries
in the armsse_variants[] array and num_cpus is either 1 or 2; we also
already assert in armsse_init() that num_cpus is not too large.
However, adding an assert to armsse_realize() like the one in
armsse_init() should help Coverity figure out that these code paths
aren't possible.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200713143716.9881-1-peter.maydell@linaro.org
2020-07-20 11:35:17 +01:00
Richard Henderson 19bd6aafbd hw/arm/virt: Disable memory hotplug when MTE is enabled
When MTE is enabled, tag memory must exist for all RAM.

It might be possible to simultaneously hot plug tag memory
alongside the corresponding normal memory, but for now just
disable hotplug.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200713213341.590275-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-20 11:35:17 +01:00
Richard Henderson 7f6185ed9c hw/arm/virt: Error for MTE enabled with KVM
While we expect KVM to support MTE at some future point,
it certainly won't be ready in time for qemu 5.1.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200713213341.590275-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-20 11:35:17 +01:00
Richard Henderson 6f4e1405b9 hw/arm/virt: Enable MTE via a machine property
Control this cpu feature via a machine property, much as we do
with secure=on, since both require specialized support in the
machine setup to be functional.

Default MTE to off, since this feature implies extra overhead.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200713213341.590275-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-20 11:35:15 +01:00
Peter Maydell 873ec69aeb Minor changes to:
Add an SMBus config entry
 
 Cleanup/simplify/document some I2C interfaces
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE/Q1c5nzg9ZpmiCaGYfOMkJGb/4EFAl8Qko8ACgkQYfOMkJGb
 /4FZTw//bMJWaXncOCYGJS8k4mCAgE7Bbo7tz2AkIqE59ty6kQ0fjDX/olMa9bLi
 mxFEEPw1mO2A65A6najWMjhxJnuNa+a66xWpQQRfuWXTXO4zM7I8QxC6pnYjCXrN
 iYPfv6IS5TQMsKrRP3kvXueW3jkpYYyUocww9CF/CoB1YiNhVpx/p7Ov4nwdBV+6
 GU7EBenu+X0a4mk5mX7DZJ7IPvIXUSa8HTfhpiV3doAe+31W2c839+u6ZcuN6JQ5
 Vxdg5ApWasoMdEyaFvWowx2cKMZK/TYNRLJcKtxHgS5ZpfXr+lwMe3Hiv++QJw6a
 aedaZl1eYklHcY6qOD9JFlbSOx6y4pJUi2NB4SXHtji7tcTgErygRVf8PukyXuU3
 laKsavBmM0Lc/w4BbyUP+L+a/YTY+vv8WHi+bOQH06HohQpZGrycf7iPL3MwYmdG
 oCf8uls5MPdPL1N6wNcGbd1F921IVd5mnNwuSfAau5ocgyUjHMuxlXradeFuJfY4
 ihIp49i3dS+f01txeM+zPIMAxImM+tpuH02nzDK9isztCZIo34P4iNMYTB0v4e4L
 ESRqohhyC55Tg6vudJBpjJLK/trz7TpyZnEOnCo5pwHvbnFyWOZY0F8Pj1LTfDMf
 sD+Nvm9yk6bNIvmRHBCvCiWX2D/Y6OC5vZdVNt+kqpSkUavxMGE=
 =SsWF
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-i2c-5' into staging

Minor changes to:

Add an SMBus config entry

Cleanup/simplify/document some I2C interfaces

# gpg: Signature made Thu 16 Jul 2020 18:46:55 BST
# gpg:                using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg:                 aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg:                 aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg:                 aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688  2686 61F3 8C90 919B FF81

* remotes/cminyard/tags/for-qemu-i2c-5:
  hw/i2c: Document the I2C qdev helpers
  hw/i2c: Rename i2c_create_slave() as i2c_slave_create_simple()
  hw/i2c: Rename i2c_realize_and_unref() as i2c_slave_realize_and_unref()
  hw/i2c: Rename i2c_try_create_slave() as i2c_slave_new()
  hw/i2c/aspeed_i2c: Simplify aspeed_i2c_get_bus()
  hw/i2c/Kconfig: Add an entry for the SMBus

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-20 11:03:09 +01:00
Philippe Mathieu-Daudé 1373b15bb5 hw/i2c: Rename i2c_create_slave() as i2c_slave_create_simple()
We use "create_simple" names for functions that allocate, initialize,
configure and realize device objects: pci_create_simple(),
isa_create_simple(), usb_create_simple(). For consistency, rename
i2c_create_slave() as i2c_slave_create_simple(). Since we have
to update all the callers, also let it return a I2CSlave object.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200705224154.16917-5-f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-07-16 12:30:54 -05:00
Philippe Mathieu-Daudé 2616f57231 hw/i2c: Rename i2c_realize_and_unref() as i2c_slave_realize_and_unref()
The other i2c functions are called i2c_slave_FOO(). Rename as
i2c_slave_realize_and_unref() to be consistent.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200705224154.16917-4-f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-07-16 12:30:54 -05:00
Philippe Mathieu-Daudé db437ca6df hw/i2c: Rename i2c_try_create_slave() as i2c_slave_new()
We use "new" names for functions that allocate and initialize
device objects: pci_new(), isa_new(), usb_new().
Let's call this one i2c_slave_new(). Since we have to update
all the callers, also let it return a I2CSlave object.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200705224154.16917-3-f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-07-16 12:30:54 -05:00
Philippe Mathieu-Daudé 7a204cbdc2 hw/i2c/aspeed_i2c: Simplify aspeed_i2c_get_bus()
All the callers of aspeed_i2c_get_bus() have a AspeedI2CState and
cast it to a DeviceState with DEVICE(), then aspeed_i2c_get_bus()
cast the DeviceState to an AspeedI2CState with ASPEED_I2C()...

Simplify aspeed_i2c_get_bus() callers by using AspeedI2CState
argument.

Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200705224154.16917-2-f4bug@amsat.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2020-07-16 12:30:54 -05:00
Philippe Mathieu-Daudé 756f739b16 hw/arm/aspeed: Do not create and attach empty SD cards by default
Since added in commit 2bea128c3d, each SDHCI is wired with a SD
card, using empty card when no block drive provided. This is not
the desired behavior. The SDHCI exposes a SD bus to plug cards
on, if no card available, it is fine to have an unplugged bus.

Avoid creating unnecessary SD card device when no block drive
provided.

Fixes: 2bea128c3d ("hw/sd/aspeed_sdhci: New device")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200705173402.15620-1-f4bug@amsat.org
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-13 14:36:12 +01:00
Peter Maydell ad938fc1d5 hw/arm/palm.c: Encapsulate misc GPIO handling in a device
Replace the free-floating set of IRQs and palmte_onoff_gpios()
function with a simple QOM device that encapsulates this
behaviour.

This fixes Coverity issue CID 1421944, which points out that
the memory returned by qemu_allocate_irqs() is leaked.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200628214230.2592-3-peter.maydell@linaro.org
2020-07-13 14:36:12 +01:00
Peter Maydell c1abd462d9 hw/arm/palm.c: Detabify
Remove hard-tabs from palm.c.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200628214230.2592-2-peter.maydell@linaro.org
2020-07-13 14:36:11 +01:00
Peter Maydell d4e1d8f57e hw/arm/tosa: Encapsulate misc GPIO handling in a device
Currently we have a free-floating set of IRQs and a function
tosa_out_switch() which handle the GPIO lines on the tosa board which
connect to LEDs, and another free-floating IRQ and tosa_reset()
function to handle the GPIO line that resets the system.  Encapsulate
this behaviour in a simple QOM device.

This commit fixes Coverity issue CID 1421929 (which pointed out that
the 'outsignals' in tosa_gpio_setup() were leaked), because it
removes the use of the qemu_allocate_irqs() API from this code
entirely.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200628203748.14250-3-peter.maydell@linaro.org
2020-07-13 14:36:11 +01:00
Peter Maydell ad9d854b70 hw/arm/tosa.c: Detabify
Remove the hardcoded tabs from hw/arm/tosa.c. There aren't
many, but since they're all in constant #defines they're not
going to go away with our usual "only when we touch a function"
policy on reformatting.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200628203748.14250-2-peter.maydell@linaro.org
2020-07-13 14:36:11 +01:00
Jean-Christophe Dubois 1f7197deb0 Add the ability to change the FEC PHY MDIO devices numbers on i.MX7 processor
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: c850187322be9930e47c8b234c385a7d0da245cb.1593806826.git.jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: updated for object_property_set_uint() argument reordering]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-13 14:36:08 +01:00
Jean-Christophe Dubois a9c167a3c4 Add the ability to change the FEC PHY MDIO device number on i.MX6 processor
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 05a64e83eb1c0c865ac077b22c599425c024c02c.1593806826.git.jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: updated for object_property_set_uint() argument reordering]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-13 14:36:08 +01:00
Jean-Christophe Dubois 74c1330582 Add the ability to change the FEC PHY MDIO device number on i.MX25 processor
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 9f8923ecd974160ae8f634c275b1100c2cbe66d7.1593806826.git.jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: updated for object_property_set_uint() argument reordering]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-13 14:36:07 +01:00
Markus Armbruster 668f62ec62 error: Eliminate error_propagate() with Coccinelle, part 1
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away.  Convert

    if (!foo(..., &err)) {
        ...
        error_propagate(errp, err);
        ...
        return ...
    }

to

    if (!foo(..., errp)) {
        ...
        ...
        return ...
    }

where nothing else needs @err.  Coccinelle script:

    @rule1 forall@
    identifier fun, err, errp, lbl;
    expression list args, args2;
    binary operator op;
    constant c1, c2;
    symbol false;
    @@
         if (
    (
    -        fun(args, &err, args2)
    +        fun(args, errp, args2)
    |
    -        !fun(args, &err, args2)
    +        !fun(args, errp, args2)
    |
    -        fun(args, &err, args2) op c1
    +        fun(args, errp, args2) op c1
    )
            )
         {
             ... when != err
                 when != lbl:
                 when strict
    -        error_propagate(errp, err);
             ... when != err
    (
             return;
    |
             return c2;
    |
             return false;
    )
         }

    @rule2 forall@
    identifier fun, err, errp, lbl;
    expression list args, args2;
    expression var;
    binary operator op;
    constant c1, c2;
    symbol false;
    @@
    -    var = fun(args, &err, args2);
    +    var = fun(args, errp, args2);
         ... when != err
         if (
    (
             var
    |
             !var
    |
             var op c1
    )
            )
         {
             ... when != err
                 when != lbl:
                 when strict
    -        error_propagate(errp, err);
             ... when != err
    (
             return;
    |
             return c2;
    |
             return false;
    |
             return var;
    )
         }

    @depends on rule1 || rule2@
    identifier err;
    @@
    -    Error *err = NULL;
         ... when != err

Not exactly elegant, I'm afraid.

The "when != lbl:" is necessary to avoid transforming

         if (fun(args, &err)) {
             goto out
         }
         ...
     out:
         error_propagate(errp, err);

even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().

Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly.  I don't know what exactly "when strict" does, only that
it helps here.

The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err".  For
an example where it's too narrow, see vfio_intx_enable().

Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there.  Converted manually.

Line breaks tidied up manually.  One nested declaration of @local_err
deleted manually.  Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster 778a2dc592 qom: Use returned bool to check for failure, Coccinelle part
The previous commit enables conversion of

    foo(..., &err);
    if (err) {
        ...
    }

to

    if (!foo(..., errp)) {
        ...
    }

for QOM functions that now return true / false on success / error.
Coccinelle script:

    @@
    identifier fun = {
        object_apply_global_props, object_initialize_child_with_props,
        object_initialize_child_with_propsv, object_property_get,
        object_property_get_bool, object_property_parse, object_property_set,
        object_property_set_bool, object_property_set_int,
        object_property_set_link, object_property_set_qobject,
        object_property_set_str, object_property_set_uint, object_set_props,
        object_set_propv, user_creatable_add_dict,
        user_creatable_complete, user_creatable_del
    };
    expression list args, args2;
    typedef Error;
    Error *err;
    @@
    -    fun(args, &err, args2);
    -    if (err)
    +    if (!fun(args, &err, args2))
         {
             ...
         }

Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.

Line breaks tidied up manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-29-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster 5325cc34a2 qom: Put name parameter before value / visitor parameter
The object_property_set_FOO() setters take property name and value in
an unusual order:

    void object_property_set_FOO(Object *obj, FOO_TYPE value,
                                 const char *name, Error **errp)

Having to pass value before name feels grating.  Swap them.

Same for object_property_set(), object_property_get(), and
object_property_parse().

Convert callers with this Coccinelle script:

    @@
    identifier fun = {
        object_property_get, object_property_parse, object_property_set_str,
        object_property_set_link, object_property_set_bool,
        object_property_set_int, object_property_set_uint, object_property_set,
        object_property_set_qobject
    };
    expression obj, v, name, errp;
    @@
    -    fun(obj, v, name, errp)
    +    fun(obj, name, v, errp)

Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information".  Convert that one manually.

Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.

Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually.  The other files using RXCPU that way don't need
conversion.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]
2020-07-10 15:18:08 +02:00
Markus Armbruster 4d21fcd524 qom: Don't handle impossible object_property_get_link() failure
Don't handle object_property_get_link() failure that can't happen
unless the programmer screwed up, pass &error_abort.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200707160613.848843-25-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster 118bfd76c9 qdev: Use returned bool to check for qdev_realize() etc. failure
Convert

    foo(..., &err);
    if (err) {
        ...
    }

to

    if (!foo(..., &err)) {
        ...
    }

for qdev_realize(), qdev_realize_and_unref(), qbus_realize() and their
wrappers isa_realize_and_unref(), pci_realize_and_unref(),
sysbus_realize(), sysbus_realize_and_unref(), usb_realize_and_unref().
Coccinelle script:

    @@
    identifier fun = {
        isa_realize_and_unref, pci_realize_and_unref, qbus_realize,
        qdev_realize, qdev_realize_and_unref, sysbus_realize,
        sysbus_realize_and_unref, usb_realize_and_unref
    };
    expression list args, args2;
    typedef Error;
    Error *err;
    @@
    -    fun(args, &err, args2);
    -    if (err)
    +    if (!fun(args, &err, args2))
         {
             ...
         }

Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information".  Nothing to convert there; skipped.

Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Converted manually.

A few line breaks tidied up manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200707160613.848843-5-armbru@redhat.com>
2020-07-10 15:01:06 +02:00
Peter Maydell c8eaf81fd2 virtio,acpi: features, fixes, cleanups.
vdpa support
 virtio-mem support
 a handy script for disassembling acpi tables
 misc fixes and cleanups
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl8EY+MPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRpOMkIAMMhfbzZXlwv1xiQ/pMTtEqXDnLeic7NK6xF
 RJkAFlMM+eEXBRZLYJXhPAFjneTA813vR0xlygHn2pYhCF3ozTfLqEABfQsG0w+d
 VDSYTnFHAx2GwGGQBNYltsIs+8lAADYhlo9VG/qC5nAsNaoVBeTJLuF96un1WGDz
 vWH0Cx/AG+yhiKvlSHA/CCSXMVGVTkRfUCjGF8Yq0mVtx23OZ9blQkJRkGfHWctB
 GxQlh/b+4YLaXhy+V1+/Iu2U45KgKN7qrsyKvHBMgKd2qazowr/D8Aexh4hN/eg5
 jibmxurDHXze+VUDCySy6qLBBySNkz++qLKfPOQ0iszDHLXQzOQ=
 =H/KL
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,acpi: features, fixes, cleanups.

vdpa support
virtio-mem support
a handy script for disassembling acpi tables
misc fixes and cleanups

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 07 Jul 2020 13:00:35 BST
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (41 commits)
  vhost-vdpa: introduce vhost-vdpa net client
  vhost-vdpa: introduce vhost-vdpa backend
  vhost_net: introduce set_config & get_config
  vhost: implement vhost_force_iommu method
  vhost: introduce new VhostOps vhost_force_iommu
  vhost: implement vhost_vq_get_addr method
  vhost: introduce new VhostOps vhost_vq_get_addr
  vhost: implement vhost_dev_start method
  vhost: introduce new VhostOps vhost_dev_start
  vhost: check the existence of vhost_set_iotlb_callback
  virtio-pci: implement queue_enabled method
  virtio-bus: introduce queue_enabled method
  vhost_net: use the function qemu_get_peer
  net: introduce qemu_get_peer
  MAINTAINERS: add VT-d entry
  docs: vhost-user: add Virtio status protocol feature
  tests/acpi: remove stale allowed tables
  numa: Auto-enable NUMA when any memory devices are possible
  virtio-mem: Exclude unplugged memory during migration
  virtio-mem: Add trace events
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	hw/arm/virt.c
#	hw/virtio/trace-events
2020-07-07 17:37:44 +01:00
Peter Maydell 213f63df77 Replace uses of FROM_SSI_SLAVE() macro with QOM casts
The FROM_SSI_SLAVE() macro predates QOM and is used as a typesafe way
to cast from an SSISlave* to the instance struct of a subtype of
TYPE_SSI_SLAVE.  Switch to using the QOM cast macros instead, which
have the same effect (by writing the QOM macros if the types were
previously missing them.)

(The FROM_SSI_SLAVE() macro allows the SSISlave member of the
subtype's struct to be anywhere as long as it is named "ssidev",
whereas a QOM cast macro insists that it is the first thing in the
subtype's struct.  This is true for all the types we convert here.)

This removes all the uses of FROM_SSI_SLAVE() so we can delete the
definition.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-18-peter.maydell@linaro.org
2020-07-03 16:59:46 +01:00
Peter Maydell 62a4d34020 hw/arm/spitz: Provide usual QOM macros for corgi-ssp and spitz-lcdtg
The QOM types "spitz-lcdtg" and "corgi-ssp" are missing the
usual QOM TYPE and casting macros; provide and use them.

In particular, we can safely use the QOM cast macros instead of
FROM_SSI_SLAVE() because in both cases the 'ssidev' field of
the instance state struct is the first field in it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-17-peter.maydell@linaro.org
2020-07-03 16:59:46 +01:00
Peter Maydell e53652ebea hw/arm/pxa2xx_pic: Use LOG_GUEST_ERROR for bad guest register accesses
Instead of using printf() for logging guest accesses to invalid
register offsets in the pxa2xx PIC device, use the usual
qemu_log_mask(LOG_GUEST_ERROR,...).

This was the only user of the REG_FMT macro in pxa.h, so we can
remove that.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-16-peter.maydell@linaro.org
2020-07-03 16:59:45 +01:00
Peter Maydell eb2d6dbc98 hw/arm/spitz: Use LOG_GUEST_ERROR for bad guest register accesses
Instead of logging guest accesses to invalid register offsets in the
Spitz flash device with zaurus_printf() (which just prints to stderr),
use the usual qemu_log_mask(LOG_GUEST_ERROR,...).

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-15-peter.maydell@linaro.org
2020-07-03 16:59:45 +01:00
Peter Maydell a0a8cf78e0 hw/gpio/zaurus.c: Use LOG_GUEST_ERROR for bad guest register accesses
Instead of logging guest accesses to invalid register offsets in this
device using zaurus_printf() (which just prints to stderr), use the
usual qemu_log_mask(LOG_GUEST_ERROR,...).

Since this was the only use of the zaurus_printf() macro outside
spitz.c, we can move the definition of that macro from sharpsl.h
to spitz.c.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-14-peter.maydell@linaro.org
2020-07-03 16:59:45 +01:00
Peter Maydell eb2dc887a4 hw/arm/spitz: Encapsulate misc GPIO handling in a device
Currently we have a free-floating set of IRQs and a function
spitz_out_switch() which handle some miscellaneous GPIO lines for the
spitz board.  Encapsulate this behaviour in a simple QOM device.

At this point we can finally remove the 'max1111' global, because the
ADC battery-temperature value is now handled by the misc-gpio device
writing the value to its outbound "adc-temp" GPIO, which the board
code wires up to the appropriate inbound GPIO line on the max1111.

This commit also fixes Coverity issue CID 1421913 (which pointed out
that the 'outsignals' in spitz_scoop_gpio_setup() were leaked),
because it removes the use of the qemu_allocate_irqs() API from this
code entirely.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-13-peter.maydell@linaro.org
2020-07-03 16:59:45 +01:00
Peter Maydell 3029681235 hw/misc/max111x: Create header file for documentation, TYPE_ macros
Create a header file for the hw/misc/max111x device, in the
usual modern style for QOM devices:
 * definition of the TYPE_ constants and macros
 * definition of the device's state struct so that it can
   be embedded in other structs if desired
 * documentation of the interface

This allows us to use TYPE_MAX_1111 in the spitz.c code rather
than the string "max1111".

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200628142429.17111-12-peter.maydell@linaro.org
2020-07-03 16:59:45 +01:00
Peter Maydell 871f82722c hw/misc/max111x: Use GPIO lines rather than max111x_set_input()
The max111x ADC device model allows other code to set the level on
the 8 ADC inputs using the max111x_set_input() function.  Replace
this with generic qdev GPIO inputs, which also allow inputs to be set
to arbitrary values.

Using GPIO lines will make it easier for board code to wire things
up, so that if device A wants to set the ADC input it doesn't need to
have a direct pointer to the max111x but can just set that value on
its output GPIO, which is then wired up by the board to the
appropriate max111x input.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-11-peter.maydell@linaro.org
2020-07-03 16:59:45 +01:00
Peter Maydell 4aed7b51c2 hw/arm/spitz: Use max111x properties to set initial values
Use the new max111x qdev properties to set the initial input
values rather than calling max111x_set_input(); this means that
on system reset the inputs will correctly return to their initial
values.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200628142429.17111-10-peter.maydell@linaro.org
2020-07-03 16:59:44 +01:00
Peter Maydell 2e354c028a hw/arm/spitz: Implement inbound GPIO lines for bit5 and power signals
Currently the Spitz board uses a nasty hack for the GPIO lines
that pass "bit5" and "power" information to the LCD controller:
the lcdtg realize function sets a global variable to point to
the instance it just realized, and then the functions spitz_bl_power()
and spitz_bl_bit5() use that to find the device they are changing
the internal state of. There is a comment reading:
 FIXME: Implement GPIO properly and remove this hack.
which was added in 2009.

Implement GPIO properly and remove this hack.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-6-peter.maydell@linaro.org
2020-07-03 16:59:44 +01:00
Peter Maydell ffe7f90698 hw/arm/spitz: Keep pointers to scp0, scp1 in SpitzMachineState
Keep pointers to scp0, scp1 in SpitzMachineState, and just pass
that to spitz_scoop_gpio_setup().

(We'll want to use some of the other fields in SpitzMachineState
in that function in the next commit.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-5-peter.maydell@linaro.org
2020-07-03 16:59:44 +01:00
Peter Maydell 39854425d7 hw/arm/spitz: Keep pointers to MPU and SSI devices in SpitzMachineState
Keep pointers to the MPU and the SSI devices in SpitzMachineState.
We're going to want to make GPIO connections between some of the
SSI devices and the SCPs, so we want to keep hold of a pointer to
those; putting the MPU into the struct allows us to pass just
one thing to spitz_ssp_attach() rather than two.

We have to retain the setting of the global "max1111" variable
for the moment as it is used in spitz_adc_temp_on(); later in
this series of commits we will be able to remove it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-4-peter.maydell@linaro.org
2020-07-03 16:59:44 +01:00
Peter Maydell e3d986da47 hw/arm/spitz: Create SpitzMachineClass abstract base class
For the four Spitz-family machines (akita, borzoi, spitz, terrier)
create a proper abstract class SpitzMachineClass which encapsulates
the common behaviour, rather than having them all derive directly
from TYPE_MACHINE:
 * instead of each machine class setting mc->init to a wrapper
   function which calls spitz_common_init() with parameters,
   put that data in the SpitzMachineClass and make spitz_common_init
   the SpitzMachineClass machine-init function
 * move the settings of mc->block_default_type and
   mc->ignore_memory_transaction_failures into the SpitzMachineClass
   class init rather than repeating them in each machine's class init

(The motivation is that we're going to want to keep some state in
the SpitzMachineState so we can connect GPIOs between devices created
in one sub-function of the machine init to devices created in a
different sub-function.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200628142429.17111-3-peter.maydell@linaro.org
2020-07-03 16:59:43 +01:00
Peter Maydell f6319db25d hw/arm/spitz: Detabify
The spitz board has been around a long time, and still has a fair number
of hard-coded tab characters in it. We're about to do some work on
this source file, so start out by expanding out the tabs.

This commit is a pure whitespace only change.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200628142429.17111-2-peter.maydell@linaro.org
2020-07-03 16:59:43 +01:00
Andrew Jones 2c1fb4d5c0 hw/arm/virt-acpi-build: Only expose flash on older machine types
The flash device is exclusively for the host-controlled firmware, so
we should not expose it to the OS. Exposing it risks the OS messing
with it, which could break firmware runtime services and surprise the
OS when all its changes disappear after reboot.

As firmware needs the device and uses DT, we leave the device exposed
there. It's up to firmware to remove the nodes from DT before sending
it on to the OS. However, there's no need to force firmware to remove
tables from ACPI (which it doesn't know how to do anyway), so we
simply don't add the tables in the first place. But, as we've been
adding the tables for quite some time and don't want to change the
default hardware exposed to versioned machines, then we only stop
exposing the flash device tables for 5.1 and later machine types.

Suggested-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200629140938.17566-4-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-03 16:59:43 +01:00
Eric Auger 1b6f99d84f hw/arm/virt: Let the virtio-iommu bypass MSIs
At the moment the virtio-iommu translates MSI transactions.
This behavior is inherited from ARM SMMU. The virt machine
code knows where the guest MSI doorbells are so we can easily
declare those regions as VIRTIO_IOMMU_RESV_MEM_T_MSI. With that
setting the guest will not map MSIs through the IOMMU and those
transactions will be simply bypassed.

Depending on which MSI controller is in use (ITS or GICV2M),
we declare either:
- the ITS interrupt translation space (ITS_base + 0x10000),
  containing the GITS_TRANSLATOR or
- The GICV2M single frame, containing the MSI_SETSP_NS register.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20200629070404.10969-6-eric.auger@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-03 16:59:42 +01:00
Jean-Christophe Dubois 6552bbc6a3 Select MDIO device 2 and 1 as PHY devices for i.MX6UL EVK board.
The i.MX6UL EVK 14x14 board uses:
- PHY 2 for FEC 1
- PHY 1 for FEC 2

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: fb41992126c091a71d76ab3d1898959091f60583.1593296112.git.jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-03 16:59:41 +01:00
Jean-Christophe Dubois 456914afc6 Add the ability to select a different PHY for each i.MX6UL FEC interface
Add properties to the i.MX6UL processor to be able to select a
particular PHY on the MDIO bus for each FEC device.

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: ea1d604198b6b73ea6521676e45bacfc597aba53.1593296112.git.jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-03 16:59:41 +01:00
David Hildenbrand 195784a0cf numa: Auto-enable NUMA when any memory devices are possible
Let's auto-enable it also when maxmem is specified but no slots are
defined. This will result in us properly creating ACPI srat tables,
indicating the maximum possible PFN to the guest OS. Based on this, e.g.,
Linux will enable the swiotlb properly.

This avoids having to manually force the switolb on (swiotlb=force) in
Linux in case we're booting only using DMA memory (e.g., 2GB on x86-64),
and virtio-mem adds memory later on that really needs the swiotlb to be
used for DMA.

Let's take care of backwards compatibility if somebody has a setup that
specifies "maxram" without "slots".

Reported-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Sergio Lopez <slp@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: qemu-arm@nongnu.org <qemu-arm@nongnu.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-22-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-03 07:57:04 -04:00
Markus Armbruster 7cd1c981eb arm/{bcm2835,fsl-imx25,fsl-imx6}: Fix realize error API violations
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.

bcm2835_peripherals_realize(), fsl_imx25_realize() and
fsl_imx6_realize() are wrong that way: they pass &err to
object_property_set_uint() and object_property_set_bool() without
checking it, and then to sysbus_realize().  Harmless, because the
former can't actually fail here.

Fix by passing &error_abort instead.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Andrew Baumann <Andrew.Baumann@microsoft.com>
Cc: "Philippe Mathieu-Daudé" <philmd@redhat.com>
Cc: Jean-Christophe Dubois <jcd@tribudubois.net>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-26-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-07-02 11:54:47 +02:00
Markus Armbruster 17d5d49a4e hw/arm/armsse: Fix armsse_realize() error API violation
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.

armsse_realize() is wrong that way: it passes &err to
object_property_set_int() multiple times without checking it, and then
to sysbus_realize().  Harmless, because the former can't actually fail
here.

Fix by passing &error_abort instead.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-25-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-07-02 11:54:47 +02:00
Markus Armbruster 2255f6b796 aspeed: Fix realize error API violation
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.

aspeed_soc_ast2600_realize() and aspeed_soc_realize() are wrong that
way: they pass &err to object_property_set_int() and
object_property_set_bool() without checking it, and then to
sysbus_realize().  Harmless, because the former can't actually fail
here.

Fix by passing &error_abort instead.

Cc: "Cédric Le Goater" <clg@kaod.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-24-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-07-02 11:54:47 +02:00
Markus Armbruster b40181942e arm/stm32f205 arm/stm32f405: Fix realize error API violation
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.

stm32f205_soc_realize() and stm32f405_soc_realize() are wrong that
way: they pass &err to object_property_set_int() without checking it,
and then to qdev_realize().  Harmless, because the former can't
actually fail here.

Fix by passing &error_abort instead.

Cc: Alistair Francis <alistair@alistair23.me>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200630090351.1247703-23-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-07-02 11:54:47 +02:00
Markus Armbruster c24d97168a hw/arm: Drop useless object_property_set_link() error handling
object_property_set_link() fails when the property doesn't exist, is
not settable, or its .check() method fails.  These are all programming
errors here, so passing it &error_abort is appropriate.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Cédric Le Goater" <clg@kaod.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200630090351.1247703-17-armbru@redhat.com>
2020-07-02 06:25:29 +02:00
Markus Armbruster 123327d14e aspeed: Clean up roundabout error propagation
Replace

        sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), &local_err);
        error_propagate(&err, local_err);
        if (err) {
            error_propagate(errp, err);
            return;
	}

by

        sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), &err);
        if (err) {
            error_propagate(errp, err);
            return;
	}

Cc: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200630090351.1247703-13-armbru@redhat.com>
2020-07-02 06:25:29 +02:00
Markus Armbruster 9261ef5e32 Clean up some calls to ignore Error objects the right way
Receiving the error in a local variable only to free it is less clear
(and also less efficient) than passing NULL.  Clean up.

Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Jerome Forissier <jerome@forissier.org>
CC: Greg Kurz <groug@kaod.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200630090351.1247703-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-07-02 06:25:28 +02:00
Peter Maydell 553cf5d7c4 target-arm queue:
* hw/arm/aspeed: improve QOM usage
  * hw/misc/pca9552: trace GPIO change events
  * target/arm: Implement ARMv8.5-MemTag for system emulation
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAl72EJcZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3pFyEACkbCVp4G+L5152dVbuACEM
 pIIINMusEj8Liyx9HRv6K0QnK2+Vd9OITx0lzxER36FrHumgDEXtjWOTJnnJiUbM
 wCLsVuSMybh01UtyI6bDyl0H8wb5uctrnow/UKQTOAPaucQQoss6Wq17z5xJ/gKT
 aNDW4rPrAfdqAWbd/Pd4Z2YMaI3JzUDofj4ea5kcmYZI8lP7nfGI+nVgC02a8S7z
 GVAxhLmTIXBMJDiwBQcW33qiUQOhVvEZWo2u72uTb8eTRhHz4lsVSm6VnHZCCaXN
 Q1lIknJWYhN/g3JE/2RQZXEV4f8imjUau3j+U6CZmftD/kYU9a9CInX0feP3Tjb1
 OCfNezvtD6KLXsJmYsrqjOe0FwJFck2gWcesamr7WJ3lzLI/V3VDmRahwc7hwp4o
 29F5cJ3uhICVDTrDyGQ4rW7qhDaoeqo6F+kwPI1cmiGexDUPhDyIQ1UwGRkSRllN
 scWeTyET6aI7AB1iwYitJZ6wQ3fmymZYhbZa0BMPVn4U/pV58uMhNQ9MZ1K+g7NQ
 /d24jWSmZFyhGqqKaXSlFFTDon4rglov2JgXcsktrfG5GAzjKgXaFtnqE4qURiJ3
 0MRzc/s6WcMWvy1adBbZNwgFWx1KIZuW8eXn6o8Ghpl+X/4y1zCEkMPJyFCgQr59
 lp3WtCOCzGOOKP0T/slNyg==
 =uHRc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200626' into staging

target-arm queue:
 * hw/arm/aspeed: improve QOM usage
 * hw/misc/pca9552: trace GPIO change events
 * target/arm: Implement ARMv8.5-MemTag for system emulation

# gpg: Signature made Fri 26 Jun 2020 16:13:27 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200626: (57 commits)
  target/arm: Enable MTE
  target/arm: Add allocation tag storage for system mode
  target/arm: Create tagged ram when MTE is enabled
  target/arm: Cache the Tagged bit for a page in MemTxAttrs
  target/arm: Always pass cacheattr to get_phys_addr
  target/arm: Set PSTATE.TCO on exception entry
  target/arm: Implement data cache set allocation tags
  target/arm: Complete TBI clearing for user-only for SVE
  target/arm: Add mte helpers for sve scatter/gather memory ops
  target/arm: Handle TBI for sve scalar + int memory ops
  target/arm: Add mte helpers for sve scalar + int ff/nf loads
  target/arm: Add mte helpers for sve scalar + int stores
  target/arm: Add mte helpers for sve scalar + int loads
  target/arm: Add arm_tlb_bti_gp
  target/arm: Tidy trans_LD1R_zpri
  target/arm: Use mte_check1 for sve LD1R
  target/arm: Use mte_checkN for sve unpredicated stores
  target/arm: Use mte_checkN for sve unpredicated loads
  target/arm: Add helper_mte_check_zva
  target/arm: Implement helper_mte_checkN
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 18:22:36 +01:00
Igor Mammedov 32a354dc6c numa: forbid '-numa node, mem' for 5.1 and newer machine types
Deprecation period is run out and it's a time to flip the switch
introduced by cd5ff8333a.  Disable legacy option for new machine
types (since 5.1) and amend documentation.

'-numa node,memdev' shall be used instead of disabled option
with new machine types.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200609135635.761587-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-26 09:39:39 -04:00
Richard Henderson 8bce44a2f6 target/arm: Create tagged ram when MTE is enabled
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200626033144.790098-44-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 14:31:12 +01:00
Philippe Mathieu-Daudé 15ce12cfdd hw/arm/aspeed: Describe each PCA9552 device
We have 2 distinct PCA9552 devices. Set their description
to distinguish them when looking at the trace events.

Description name taken from:
https://github.com/open-power/witherspoon-xml/blob/master/witherspoon.xml

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-8-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 14:30:28 +01:00
Philippe Mathieu-Daudé 888b2b034a hw/arm/aspeed: QOM'ify AspeedMachineState
AspeedMachineState seems crippled. We use incorrectly 2
different structures to do the same thing. Merge them
altogether:
- Move AspeedMachine fields to AspeedMachineState
- AspeedMachineState is now QOM
- Remove unused AspeedMachine structure

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072132.2868-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 14:30:28 +01:00
Philippe Mathieu-Daudé 612b219a2a hw/arm/aspeed: Rename AspeedBoardState as AspeedMachineState
To have a more consistent naming, rename AspeedBoardState
as AspeedMachineState.

Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072132.2868-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 14:30:28 +01:00
Philippe Mathieu-Daudé f489960d36 hw/arm/aspeed: Remove extraneous MemoryRegion object owner
I'm confused by this code, 'bmc' is created as:

  bmc = g_new0(AspeedBoardState, 1);

Then we use it as QOM owner for different MemoryRegion objects.
But looking at memory_region_init_ram (similarly for ROM):

  void memory_region_init_ram(MemoryRegion *mr,
                              struct Object *owner,
                              const char *name,
                              uint64_t size,
                              Error **errp)
  {
      DeviceState *owner_dev;
      Error *err = NULL;

      memory_region_init_ram_nomigrate(mr, owner, name, size, &err);
      if (err) {
          error_propagate(errp, err);
          return;
      }
      /* This will assert if owner is neither NULL nor a DeviceState.
       * We only want the owner here for the purposes of defining a
       * unique name for migration. TODO: Ideally we should implement
       * a naming scheme for Objects which are not DeviceStates, in
       * which case we can relax this restriction.
       */
      owner_dev = DEVICE(owner);
      vmstate_register_ram(mr, owner_dev);
  }

The expected assertion is not triggered ('bmc' is not NULL neither
a DeviceState).

'bmc' structure is defined as:

  struct AspeedBoardState {
      AspeedSoCState soc;
      MemoryRegion ram_container;
      MemoryRegion max_ram;
  };

What happens is when using 'OBJECT(bmc)', the QOM macros cast the
memory pointed by bmc, which first member is 'soc', which is
initialized ...:

  object_initialize_child(OBJECT(machine), "soc",
                          &bmc->soc, amc->soc_name);

The 'soc' object is indeed a DeviceState, so the assertion passes.

Since this is fragile and only happens to work by luck, remove the
dangerous OBJECT(bmc) owner argument.

Note, this probably breaks migration for this machine.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200623072132.2868-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-26 14:30:28 +01:00
Peter Maydell 63d211993b virtio,acpi,pci: fixes, cleanups.
Fixes, cleanups in ACPI, PCI, virtio.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl70SM8PHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRpmlYIAMX7h46FSx8jXJPLMVHYjlOnzwSCZdFXnNt+
 qj6GZfIrLSDsnz+X7hRA5QlX23NBjhwDvcQC3ucvGwzFMmQRjGwCK8tJJSfFWYTB
 oL1/YpTU6qHxOtR8UynuZak/Rq822Ug6PSAazQDG39HbS2v5srHXC1aVNSbhiMIi
 7SdE8wBWae3R7Y7sVfIU4pMc3GeztPiqgXewAyOskVqrTQzuwuBhwQiK7kd6Md2Y
 fdTP+pZrXl7czMjnb9dM6Wq1griFrGDQVesSiggfGGI3rQ3W8Z24k5k+u81DKi+1
 fVXwXsebRokCpEYgWgmyK9D2SajNjmDWBdyCHvO64FClpAzZWlc=
 =J1qe
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,acpi,pci: fixes, cleanups.

Fixes, cleanups in ACPI, PCI, virtio.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 25 Jun 2020 07:48:47 BST
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  Rename use_acpi_pci_hotplug to more appropriate use_acpi_hotplug_bridge
  Stop vhost-user sending uninitialized mmap_offsets
  docs/specs/tpm: ACPI boot now supported for TPM/ARM
  arm/acpi: Add the TPM2.0 device under the DSDT
  acpi: Some build_tpm2() code reshape
  tests/acpi: update expected data files
  acpi: q35: drop _SB.PCI0.ISA.LPCD opregion.
  acpi: drop build_piix4_pm()
  acpi: drop serial/parallel enable bits from dsdt
  acpi: simplify build_isa_devices_aml()
  acpi: factor out fw_cfg_add_acpi_dsdt()
  acpi: move aml builder code for i8042 (kbd+mouse) device
  floppy: move cmos_get_fd_drive_type() from pc
  floppy: make isa_fdc_get_drive_max_chs static
  acpi: move aml builder code for floppy device
  acpi: bios-tables-test: show more context on asl diffs
  qtest: allow DSDT acpi table changes

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-25 16:52:42 +01:00
Peter Maydell 0250c595c9 Qdev patches for 2020-06-23
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl7yDNwSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTHQkP/jAhlXBYO80EWl9dt/0o3tcJhzc8w/WU
 micNJPpRA90hLhAARivGbfHiiUl0sUpqiBN37/vacV3WhV9kTQoJr2owbhoGTAeg
 arvH0RyEPUWszy84kIISWpMLBEkDZZG8dHtSbqOfexFmf05vb47obqAz8okVE7kH
 7nylEzNn//D8IR9owR7qt2lSnDE8ISVPiZsd4djL9sE+5B+t0wx/dwudnlE8Q4fh
 jdLHGDJJ8xNQEQwfKZAtMb/82K+hEhQhv/JZ2Z+e3WWcsUtDyXKken8kxxbK86ZP
 Oz0FE1cFW2xh9NVsTYuLmS2sczCbq0LRAY5PWC+0O8EDqhDQAXjSMYCDvaIADOhs
 iGhl4SjExWRVq7xScSrrOi4S6yUTSWNxMhCxWSft9JU7fOZPQ/Fw3l6SudBIACbm
 YgkRatruLWnQTyFRdQa+HuYFdUyo6WlpUWBhVIpESCVB8tQMVuFK6bremKvD4A9y
 ZxzDI0FDOzXBUWf7Ebyhf6HV98UqAt39n2yyXPvHmG1PDunPrqwvTmpD0bVcGbdb
 l7jR9Pj7mUZc69QAkZ6g5wYivEkTmsZX7PhQn9M8RZoIrk0g5kHfP7FR9/pYr9g9
 9EQjGX5CWuRzxkRJHqWPYIWTVZI6uxePyeGSchsV1mTr0/1S/3zm7qu8Tr8mzBds
 m5iHhdz/xB23
 =Fhsu
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-qdev-2020-06-23' into staging

Qdev patches for 2020-06-23

# gpg: Signature made Tue 23 Jun 2020 15:08:28 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qdev-2020-06-23:
  sd/milkymist-memcard: Fix error API violation
  sd/pxa2xx_mmci: Don't crash on pxa2xx_mmci_init() error
  arm/aspeed: Drop aspeed_board_init_flashes() parameter @errp
  qdev: Make qdev_prop_set_drive() match the other helpers
  qdev: Reject chardev property override
  qdev: Reject drive property override
  qdev: Improve netdev property override error a bit
  qdev: Eliminate get_pointer(), set_pointer()
  blockdev: Deprecate -drive with bogus interface type
  docs/qdev-device-use.txt: Update section "Default Devices"
  fdc: Deprecate configuring floppies with -global isa-fdc
  fdc: Open-code fdctrl_init_isa()
  fdc: Reject clash between -drive if=floppy and -global isa-fdc
  iotests/172: Cover -global floppy.drive=...
  iotests/172: Cover empty filename and multiple use of drives
  iotests/172: Include "info block" in test output

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-25 09:34:52 +01:00
Eric Auger 5ab540e9b7 arm/acpi: Add the TPM2.0 device under the DSDT
In case it is dynamically instantiated, add the TPM 2.0 device object
under the DSDT table in the ACPI namespace. Its HID is MSFT0101
while its current resource settings (CRS) property is initialized
with the guest physical address and MMIO size of the device.

Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

Message-Id: <20200622140620.17229-3-eric.auger@redhat.com>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-06-24 17:18:28 -04:00
Markus Armbruster c20b4ccce0 arm/aspeed: Drop aspeed_board_init_flashes() parameter @errp
We always pass &error_abort.  Drop the parameter, use &error_abort
directly.

Cc: Cédric Le Goater <clg@kaod.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622094227.1271650-15-armbru@redhat.com>
2020-06-23 16:07:07 +02:00
Markus Armbruster 934df91296 qdev: Make qdev_prop_set_drive() match the other helpers
qdev_prop_set_drive() can fail.  None of the other qdev_prop_set_FOO()
can; they abort on error.

To clean up this inconsistency, rename qdev_prop_set_drive() to
qdev_prop_set_drive_err(), and create a qdev_prop_set_drive() that
aborts on error.

Coccinelle script to update callers:

    @ depends on !(file in "hw/core/qdev-properties-system.c")@
    expression dev, name, value;
    symbol error_abort;
    @@
    -    qdev_prop_set_drive(dev, name, value, &error_abort);
    +    qdev_prop_set_drive(dev, name, value);

    @@
    expression dev, name, value, errp;
    @@
    -    qdev_prop_set_drive(dev, name, value, errp);
    +    qdev_prop_set_drive_err(dev, name, value, errp);

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622094227.1271650-14-armbru@redhat.com>
2020-06-23 16:07:07 +02:00
Shameer Kolothum 539533b85f arm/virt: Add memory hot remove support
This adds support for memory(pc-dimm) hot remove on arm/virt that
uses acpi ged device.

NVDIMM hot removal is not yet supported.

Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Message-id: 20200622124157.20360-1-shameerali.kolothum.thodi@huawei.com
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-23 11:39:48 +01:00