Don't use strncpy when the source string is known to fit
in the destination buffer. Use equivalent memcpy.
We could even use strcpy, here, but some static analyzers
warn about that, so don't add new uses.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The pseries platform already contains an IOMMU implementation, since it is
essential for the platform's paravirtualized VIO devices. This IOMMU
support is currently built into the implementation of the VIO "bus" and
the various VIO devices.
This patch converts this code to make use of the new common IOMMU
infrastructure.
We don't yet handle synchronization of map/unmap callbacks vs. invalidations,
this will require some complex interaction with the kernel and is not a
major concern at this stage.
Cc: Alex Graf <agraf@suse.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We were incorrectly g_free'ing an object that isn't allocated
in one error path and failed to release it completely in another
This fixes qemu crashes with some cases of IO errors.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
PAPR virtual IO (VIO) devices require a unique, but otherwise arbitrary,
"address" used as a token to the hypercalls which manipulate them.
Currently the pseries machine code does an ok job of allocating these
addresses when the legacy -net nic / -serial and so forth options are used
but will fail to allocate them properly when using -device.
Specifically, you can use -device if all addresses are explicitly assigned.
Without explicit assignment, only one VIO device of each type (network,
console, SCSI) will be assigned properly, any further ones will attempt
to take the same address leading to a fatal error.
This patch fixes the situation by adding a proper address allocator to the
VIO "bus" code. This is used both by -device and the legacy options and
default devices. Addresses can still be explicitly assigned with -device
options if desired.
This patch changes the (guest visible) numbering of VIO devices, but since
their addresses are discovered using the device tree and already differ
from the numbering found on existing PowerVM systems, this does not break
compatibility.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the PAPR vscsi implementation does not properly clear its table
of request tags when the system is reset. This patch adds a reset hook
to do so.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The PAPR VSCSI emulation contains a few lines of code which were once used
for debug but now do nothing at all. This patch removes them.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
With the upcoming sglist support, HBAs will not see any transfer_data
call and will not have a way to detect short transfers. So pass the
residual amount of data upon command completion.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace device_init() with generalized type_init().
While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This was done in a mostly automated fashion. I did it in three steps and then
rebased it into a single step which avoids repeatedly touching every file in
the tree.
The first step was a sed-based addition of the parent type to the subclass
registration functions.
The second step was another sed-based removal of subclass registration functions
while also adding virtual functions from the base class into a class_init
function as appropriate.
Finally, a python script was used to convert the DeviceInfo structures and
qdev_register_subclass functions to TypeInfo structures, class_init functions,
and type_register_static calls.
We are almost fully converted to QOM after this commit.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These are various small stylistic changes which help make things more
consistent such that the automated conversion script can be simpler.
It's not necessary to agree or disagree with these style changes because all
of this code is going to be rewritten by the patch monkey script anyway.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This also requires little more than adding the new argument to
scsi_device_find, and the qdev property. All devices by default
end up on channel 0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This only requires changes in two places: in SCSIBus, we need to look
for a free LUN if somebody creates a device with a pre-existing scsi-id
but the default LUN (-1, meaning "search for a free spot"); in vSCSI,
we need to actually parse the LUN according to the SCSI spec.
For vSCSI, max_target/max_lun are set according to the logical unit
addressing format in SAM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change the devs array into a linked list, and add a scsi_device_find
function to navigate the children list instead. This lets the SCSI
bus use more complex addressing, and HBAs can talk to the correct device
when there are multiple LUNs per target.
scsi_device_find may return another LUN on the same target if none is
found that matches exactly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I introduced this bug in commit 05751d3 (vscsi: always use get_sense,
2011-08-03) because at the time there was no way to expose a sense
condition to SLOF and Linux manages to work around the bug. However,
the bug becomes evident now that SCSI devices also report unit
attention on reset.
SLOF also has problems dealing with unit attention conditions, so
it still will not boot even with this fix (just like OpenBIOS).
IBM folks are aware of their part of the bug. :-)
Reported-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Restructure common properties for sPAPR devices so that IRQ definitions
can be added in one place.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Right now the spapr devices cannot be instantiated with -device,
because the IRQs need to be passed to the spapr_*_create functions.
Do this instead in the bus's init wrapper.
This is particularly important with the conversion from scsi-disk
to scsi-{cd,hd} that Markus made. After his patches, if you
specify a scsi-cd device attached to an if=none drive, the default
VSCSI controller will not be created and, without qdevification,
you will not be able to add yours.
NOTE from agraf: added small compile fix
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Right now the CDB is not passed to the SCSIBus until scsi_req_enqueue.
Passing it to scsi_req_new will let scsi_req_new dispatch common requests
through different reqops.
Moving the memcpy to scsi_req_new is a hack that will go away as
soon as scsi_req_new will also take care of the parsing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
vscsi supports autosensing by providing sense data directly in the
response. When get_sense was added, the older state machine approach
that sent REQUEST SENSE commands separately was left in place. Remove
it, all existing SCSIDevices do support autosensing and the next patches
will make the support come for free from the SCSIBus.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
'tag' is just an abstraction to identify the command
from the driver. So we should make that explicit by
replacing 'tag' with a driver-defined pointer 'hba_private'.
This saves the lookup for driver handling several commands
in parallel.
'tag' is still being kept for tracing purposes.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The get_sense callback copies existing sense information into
the provided buffer. This is required if sense information
should be transferred together with the command response.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
... and remove some SCSIDevice variables or fields that now become unused.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the common part of scsi-disk.c and scsi-generic.c to the SCSI layer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This is for when the request must be dropped in the void,
but still memory should be freed. To this end, the devices
register a second callback in SCSIBusOps.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This covers the case of canceling a request's I/O and still
completing it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Currently the SCSIRequest structure is abstracted away and cannot accessed
directly from the driver. This requires the handler to do a lookup on
an abstract 'tag' which identifies the SCSIRequest structure.
With this patch the SCSIRequest structure is exposed to the driver. This
allows use to use it directly as an argument to the SCSIDeviceInfo
callback functions and remove the lookup.
A new callback function 'alloc_req' is introduced matching 'free
req'; unref'ing to free up resources after use is moved into the
scsi_command_complete callbacks.
This temporarily introduces a leak of requests that are cancelled,
when they are removed from the queue and not from the driver. This
is fixed later by introducing scsi_req_cancel. That patch in turn
depends on this one, because the argument to scsi_req_cancel is a
SCSIRequest.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There are more operations than a SCSI bus can handle, besides completing
commands. One example, which this series will introduce, is cleaning up
after a request is cancelled.
More long term, a "SCSI bus" can represent the LUNs attached to a
target; in this case, while all commands will ultimately reach a logical
unit, it is the target who is in charge of answering REPORT LUNs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
cppcheck reports this error:
hw/spapr_vscsi.c:274: error: Uninitialized variable: rc
If llen == 0, rc was indeed used without being initialized.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch implements the infrastructure and hypercalls necessary for
the PAPR specified Virtual SCSI interface. This is the normal method
for providing (virtual) disks to PAPR partitions.
Signed-off-by: Ben Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Paolo Bonzini
Jim Meyering
David Gibson
Benjamin Herrenschmidt
Andreas Färber
Anthony Liguori
Hannes Reinecke
Stefan Weil