Now the function returned errno, so it is better the new name.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
QEMUFile * is only intended for migration nowadays. Using it for
anything else just adds pain and a layer of buffers for no good
reason.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
This allows to drop various stubs and move the i8359 into hwlib.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This key cleanup step requires to move the IRQ debugging bit from
i8259_set_irq directly to the per-PIC pic_set_irq, to pass the PIC
parameters (I/O base, ELCR address and mask, master/slave mode) as
qdev properties, and to interconnect the PICs with their environment via
GPIO pins.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Introduce a reference to the slave PIC for the few cases we need to
access it without a proper pointer at hand and drop PicState2. We could
even live without slave_pic if we had a better way of modeling the
cascade bus the PICs are attached to (in addition to the ISA bus).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This reflects how real PICs indentify their role (in non-buffered mode):
Pass the state of the /SP input on pic_init and use it instead of
pics_state to differentiate between master and slave mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
There is nothing in the i8259 spec that justifies the special
pic_intack_read. At least the Linux PREP kernels configure the PICs
properly so that pic_read_irq returns identical values, and setting
read_reg_select in PIC0 cannot be derived from any special i8259 mode.
So switch ppc_prep to pic_read_irq and drop the now unused PIC code.
CC: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This was probably never used so far: According to the spec, polling
means ack'ing the pending IRQ and setting its corresponding bit in isr.
Moreover, we have to signal a pending IRQ via bit 7 of the returned
value, and we must not return a spurious IRQ if none is pending.
This implements the poll command without the help of pic_poll_read which
is left untouched as pic_intack_read is still using it.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This converts pic_update_irq to work against a single PIC instead of the
complete cascade. Along this change, the required update after
pic_set_irq1 is now moved into that function.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The ELCR is actually part of the chipset but we model it here for
simplicity reasons. The PIIX3 clears the ELCR on reset, which was once
broken by 4dbe19e181. Fix this by splitting up pic_init_reset from
pic_reset and clearing the register in the latter.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
MIPS and PPC users of the i8259 output signal expect us to report state
updates also after reset. As no consumer (including the master PIC) can
misinterpret the deassert as an activation event, it is safe to simply
update the IRQ state after reset.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
As we want to move the IRQ update to pic_intack, ordering matters: the
slave ack must be executed before the master ack to avoid missing
further pending slave IRQs.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
If pic_poll_read finds no pending IRQ and return a spurious one instead,
no PIC state is changed, thus we do not need to call pic_update_irq.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
As a first step towards more generic master-slave support, remove
parent_irq in favor of a per-PIC output interrupt line. The slave's
line is attached to IRQ2 of the master, but it remains unused for now.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We are about to call the latter from the former. No functional changes.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The compiler is smarter in choosing the right optimization.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The master PIC is connected to the LINTIN0 of the APICs. As the APIC
currently does not track the state of that line, we have to ask the PIC
to reinject its IRQ after the CPU picked up an event from the APIC.
This introduces pic_get_output to read the master PIC IRQ line state
without changing it. The APIC uses this function to decide if a PIC IRQ
should be reinjected on apic_update_irq. This reflects better how the
real hardware works.
The patch fixes some failures of the kvm unit tests apic and eventinj by
allowing to enable the proper CPU IRQ deassertion when the guest masks
some pending IRQs at PIC level.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Will be required when we no longer let i8259_init allocate the PIC IRQs
but convert that chips to qdev.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The ISA bus IRQ range is 0..15. What isa_irq_handler and IsaIrqState are
actually dealing with are the Global System Interrupts. Refactor the
code to clarify this.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
IsaIrqState::ioapic is always non-NULL. Probably, the concrete
qemu_irq was supposed to be tested, but that's already done by
qemu_set_irq.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These boards carry similar hardware: SDRAM (48M for LX110, 64M for LX60,
96M for LX200), 16 Mbyte FLASH, FPGA, 10/100 Mbps Ethernet PHY and 16550
UART. FPGA may be loaded with almost any Tensilica processor. It is also
used to implement Ethernet MAC, e.g. OpenCores 10/100 Mbps Ethernet MAC
and LED/DIP switches access.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is OpenCores Ethernet MAC + subset of National Semiconductors
DP83838C PHY.
OpenCores Ethernet MAC project: http://opencores.org/project,ethmac
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is to get aligned with the linux name for this machine.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Xtensa cores may have different mapping of external interrupt pins to
internal IRQ numers. Implement API to acquire core IRQ by its external
interrupt number.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
QEMU timer is used to post CCOMPARE interrupt when the core is halted.
If that CCOMPARE interrupt is masked off then the timer must be rearmed
in the callback, otherwise it will be rearmed next time the core goes to
halt by the waiti instruction.
Add test case into timer testsuite.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is conceptually cleaner and will allow us to drop the nographic
timer. Moreover, it will be mandatory to fully exploit future per-device
coalesced MMIO rings.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
interrput -> interrupt
Cc: Paul Brook <paul@codesourcery.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Calling usb_packet_complete() recursively when passing up the completion
event up the chain for devices connected via usb hub will trigger an
assert. So don't do that, make the usb hub emulation call the upstream
completion callback directly instead.
Based on a patch from Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qemu uses the ps/2 mouse by default. The usb tablet (or mouse) is
activated as soon as qemu sees some guest activity on the device,
i.e. polling for HID events. That used to work fine for both fresh
boot and migration.
Remote wakeup support changed the picture though: There will be no
polling after migration in case the guest suspended the usb bus,
waiting for wakeup events. Result is that the ps/2 mouse stays
active.
Fix this by activating the usb tablet / mouse in post_load() in case
the guest enabled remote wakeup.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Honour the maximum packet size for endpoints; this applies when
sending non-isochronous data and means we transfer only as
much as the endpoint allows, leaving the transfer descriptor
on the list for another go next time around. This allows
usb-net to work when connected to an OHCI controller model.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The OHCI Transfer Descriptor T (DataToggle) bits are 24 and 25;
fix an error which accidentally overlaid them both on the same bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
commit 891fb2cd45 removed the implicit
detach before (re-)attaching in usb_attach(). Some usb host controllers
used that behavior though to do a port reset by a detach+attach
sequence.
This patch establishes old behavior by adding a new usb_reset() function
for port resets and putting it into use, thereby also unifying port
reset behavior of all host controllers. The patch also adds asserts to
usb_attach() and usb_detach() to make sure the calls are symmetrical.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When a usb packet is canceled we need to check whenever we actually have
a scsi request in flight before we try to cancel it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All users have been converted to either isa_register_ioport
or isa_register_old_portio_list.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
[jan: fix cut'n'paste errors]
[avi: adjust pci variants not to use isa functions]
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
