Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-8-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
All other peripherals' IRQs are in the format of decimal value.
Change SIFIVE_U_GEM_IRQ to be consistent.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-7-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the QSPI2 controller to the SoC, and connects an SD
card to it. The generation of corresponding device tree source
fragment is also added.
Specify machine property `msel` to 11 to boot the same upstream
U-Boot SPL and payload image for the SiFive HiFive Unleashed board.
Note subsequent payload is stored in the SD card image.
$ qemu-system-riscv64 -nographic -M sifive_u,msel=11 -smp 5 -m 8G \
-bios u-boot-spl.bin -drive file=sdcard.img,if=sd
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-6-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the QSPI0 controller to the SoC, and connects an ISSI
25WP256 flash to it. The generation of corresponding device tree
source fragment is also added.
Since the direct memory-mapped mode is not supported by the SiFive
SPI model, the <reg> property does not populate the second group
which represents the memory mapped address of the SPI flash.
With this commit, upstream U-Boot for the SiFive HiFive Unleashed
board can boot on QEMU 'sifive_u' out of the box. This allows users
to develop and test the recommended RISC-V boot flow with a real
world use case: ZSBL (in QEMU) loads U-Boot SPL from SPI flash to
L2LIM, then U-Boot SPL loads the payload from SPI flash that is
combined with OpenSBI fw_dynamic firmware and U-Boot proper.
Specify machine property `msel` to 6 to allow booting from the SPI
flash. U-Boot spl is directly loaded via `-bios`, and subsequent
payload is stored in the SPI flash image. Example command line:
$ qemu-system-riscv64 -nographic -M sifive_u,msel=6 -smp 5 -m 8G \
-bios u-boot-spl.bin -drive file=spi-nor.img,if=mtd
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-5-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the SiFive SPI controller model for the FU540 SoC.
The direct memory-mapped SPI flash mode is unsupported.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-4-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This updates the flash information table to include various ISSI
flashes that are supported by upstream U-Boot and Linux kernel.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-3-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This adds the ISSI SPI flash support. The number of dummy cycles in
fast read, fast read dual output and fast read quad output commands
is currently using the default 8. Likewise, the same default value
is used for fast read dual/quad I/O command. Per the datasheet [1],
the number of dummy cycles is configurable, but this is not modeled
at present.
For flash whose size is larger than 16 MiB, the sequence of 3-byte
address along with EXTADD bit in the bank address register (BAR) is
not supported. We assume that guest software always uses op codes
with 4-byte address sequence. Fortunately, this is the case for both
U-Boot and Linux spi-nor drivers.
QPI (Quad Peripheral Interface) that supports 2-cycle instruction
has different default values for dummy cycles of fast read family
commands, and is unsupported at the time being.
[1] http://www.issi.com/WW/pdf/25LP-WP256.pdf
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210126060007.12904-2-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add the support needed for creating prstatus elf notes. This allows
us to use QMP dump-guest-memory.
Now ELF notes of RISC-V only contain prstatus elf notes.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Message-id: 20210201124458.1248-2-jiangyifei@huawei.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present when blk_pread() / blk_pwrite() fails, a guest error
is logged, but this is not really a guest error. Change to use
error_report() instead.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1611026585-29971-1-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
csr_ops[] is currently declared with an unknown size in cpu.h.
Since the array size is known, let's do a complete declaration.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1611024723-14293-1-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Fix xattrmap to drop remapped security.capability capabilities.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=jN7p
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-virtiofs-20210304' into staging
virtiofs minor security fix
Fix xattrmap to drop remapped security.capability capabilities.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Thu 04 Mar 2021 10:36:45 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert-gitlab/tags/pull-virtiofs-20210304:
virtiofs: drop remapped security.capability xattr as needed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On Linux, the 'security.capability' xattr holds a set of
capabilities that can change when an executable is run, giving
a limited form of privilege escalation to those programs that
the writer of the file deemed worthy.
Any write causes the 'security.capability' xattr to be dropped,
stopping anyone from gaining privilege by modifying a blessed
file.
Fuse relies on the daemon to do this dropping, and in turn the
daemon relies on the host kernel to drop the xattr for it. However,
with the addition of -o xattrmap, the xattr that the guest
stores its capabilities in is now not the same as the one that
the host kernel automatically clears.
Where the mapping changes 'security.capability', explicitly clear
the remapped name to preserve the same behaviour.
This bug is assigned CVE-2021-20263.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Fixes all over the place. Specifically this fixes
a bug which made windows guests lose device config
(such as the configured fixed IP) after upgrading
to the new QEMU.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmA+SYcPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpUAAIALa9WkjdxjZhb4FzP1OLBSTEISLEfrPE4Zk/
s5yY1wEDvH83D6fxTHv1B8tISwJ3RJn8ZhsP0c0Mb6stT7D33m7YfMFtNXBEfENX
gMgwdC2QxGMZXKGR+dIpxtYghjvuzAVN+e9w27C+s855JJ8y+chghtLuDJIbqpAk
QopftjiZix2bPYmrxlVw/A7inXL2jseJyYsgGAzIACmsGC70jK4Rk1vxrAF+2n15
D4qKOG3QLJXrfIVa8iDz/ojlVUmLWl8jnoE+oY+rjtckQHJKqodlJi5yeJxGEa3/
G7db+AIzEBge78dq7LBSJOTjoUFoQ+6Hv1QtKk2GcMKdEnsj0ng=
=NGys
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,virtio,pci: bug fixes
Fixes all over the place. Specifically this fixes
a bug which made windows guests lose device config
(such as the configured fixed IP) after upgrading
to the new QEMU.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 02 Mar 2021 14:19:51 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
vhost: simplify vhost_dev_init() fail_busyloop label
hw/pci: Have safer pcie_bus_realize() by checking error path
virtio-net: handle zero mac for a vdpa peer
i386/acpi: restore device paths for pre-5.1 vms
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* target/i386: Add bus lock debug exception support (Chenyi)
* update documentation for preferred boolean option syntax (Daniel)
* make SCSI io_timeout configurable (Hannes)
* fix handling of guest recoverable SCSI errors (myself)
* misc fixes (Pavel, Zheng Zhan Liang, Zihao)
* fix installation of binaries with entitlements (Akihiko)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmA3tzQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMsngf+OkbgTDouxq3qnn1K89n6j2wKlAj0
qPP+57o1sv5u5MjX0BkawXCMJfvTKJaOt/Cs8S0FaPTehfR5H0T2tL76KZBEdlEP
/+V3EC0Qmd1S47LKIOuDkV15szvnccyjpgwaL7Osjb0Eh0SxeXd4pBTc3yYtkacu
zb/srZ63U2iJZr93QwGmEJjuW57WNym6QWXF3Mrg9PFXybkXFTGumB2vZMlQc+MN
RWPTUKZKAiIr/HfdvpIETXY+HzJhylvIQ8OVWtM3XDorl48OWcOat/jyeNEVYgG3
o+gxIRnfvIL+42GkmUFbOKLzT5SV6p9EYYGLTuE1kU7nc6HWoD0CdPxA3A==
=UBVO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* fix --enable-fuzzing linker failures (Alexander)
* target/i386: Add bus lock debug exception support (Chenyi)
* update documentation for preferred boolean option syntax (Daniel)
* make SCSI io_timeout configurable (Hannes)
* fix handling of guest recoverable SCSI errors (myself)
* misc fixes (Pavel, Zheng Zhan Liang, Zihao)
* fix installation of binaries with entitlements (Akihiko)
# gpg: Signature made Thu 25 Feb 2021 14:41:56 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (29 commits)
tcg/i386: rdpmc: fix the the condtions
chardev: do not use short form boolean options in non-QemuOpts character device descriptions
vl: deprecate -writeconfig
target/i386: Add bus lock debug exception support
qom/object.c: Fix typo
target/i386: update to show preferred boolean syntax for -cpu
docs: update to show preferred boolean syntax for -cpu
docs: update to show preferred boolean syntax for -vnc
docs: update to show preferred boolean syntax for -chardev
qemu-options: update to show preferred boolean syntax for -vnc
qemu-options: update to show preferred boolean syntax for -incoming
qemu-options: update to show preferred boolean syntax for -netdev
qemu-options: update to show preferred boolean syntax for -spice
qemu-options: update to show preferred boolean syntax for -chardev
gdbstub: use preferred boolean option syntax
char: don't fail when client is not connected
scsi: drop 'result' argument from command_complete callback
scsi-disk: pass guest recoverable errors through even for rerror=stop
scsi-disk: pass SCSI status to scsi_handle_rw_error
scsi: introduce scsi_sense_from_errno()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Requiring a conditional for every goto is tedious:
if (busyloop_timeout) {
goto fail_busyloop;
} else {
goto fail;
}
Move the conditional to into the fail_busyloop label so that it's safe
to jump to this label unconditionally.
This change makes the migrate_add_blocker() error case more consistent.
It jumped to fail_busyloop unconditionally whereas the memslots limits
error case was conditional.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210222114931.272308-1-stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While pci_bus_realize() currently does not use the Error* argument,
it would be an error to leave pcie_bus_realize() setting bus->flags
if pci_bus_realize() had failed.
Fix by using a local Error* and return early (propagating the error)
if pci_bus_realize() failed.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210201153700.618946-1-philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some mlx vdpa devices with kernels at least up to 5.11 currently present
0 as their MAC address. This is because they have not been
pre-configured with a MAC: they have a learning bridge and only learn
the MAC once guest is up. Kernel patches and tools to allow programming
the MAC from host are being developed. For now - since these
combinations exist in the field - let's detect zero mac and just try to
proceed with the mac from the qemu command line.
This makes the guest use this MAC to send packets in turn teaching
the MAC to the card, and things work.
TODO:
report the actual MAC from QEMU commad line in the info message.
TODO:
detect that a (non-zero) hardware MAC does not match QEMU command line
and fail init.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20210225165506.18321-2-lulu@redhat.com>
mst: rewritten code comments, message printed and the commit log.
Cc: Eli Cohen <elic@nvidia.com>
Cc: Parav Pandit <parav@nvidia.com>
Tested-by: Adrian Moreno <amorenoz@redhat.com>
Tested-by: Sean Mooney <smooney@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After fixing the _UID value for the primary PCI root bridge in
af1b80ae it was discovered that this change updates Windows
configuration in an incompatible way causing network configuration
failure unless DHCP is used. More details provided on the list:
https://lists.gnu.org/archive/html/qemu-devel/2021-02/msg08484.html
This change reverts the _UID update from 1 to 0 for q35 and i440fx
VMs before version 5.2 to maintain the original behaviour when
upgrading.
Cc: qemu-stable@nongnu.org
Cc: qemu-devel@nongnu.org
Reported-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Vitaly Cheptsov <cheptsov@ispras.ru>
Message-Id: <20210301195919.9333-1-cheptsov@ispras.ru>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: af1b80ae56 ("i386/acpi: fix inconsistent QEMU/OVMF device paths")
Options such as "-gdb" or "-serial" accept a part-QemuOpts part-parsed-by-hand
character device description. Do not use short form boolean options in the
QemuOpts part.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The functionality of -writeconfig is limited and the code
does not even try to detect cases where it prints incorrect
syntax (for example if values have a quote in them, since
qemu_config_parse does not support any kind of escaping)
so remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes all over the place, a new test.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmA1Jp0PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpLBAH/iOdSXXEdBsz1sgstJfMouEWZGM1SzJBJF+X
rU25zU083Se8CimHLQF5rpShGzxvi32KbHAKTiOgZSUsozb3/oErUhfQYqYWZozW
oJyxET74S1tpoXEsPbw7w4uqo5/+B+W3Jwf7vlGtBS/m9TbSl++XwcUFDsmufarN
DiEdkPdrc6mgKprfoR8qPOzjscoSTZSX7nSgK10mcwNWXbC8d/AUbz+iCiNChcsM
zHY+0IyFvHmYke1rp0QzR8f1oupSfECipuMMHAK2d3BqcMcl09jKAES+TO+qwqo+
XK09WIYZgc/65vEckmfc0uOy1UiTj12oX4pkJHS4Qz4cvy6hAi0=
=Af1H
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,virtio,pci: fixes, tests
Fixes all over the place, a new test.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 23 Feb 2021 16:00:29 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
qtest/acpi/bios-tables-test: update acpi tables
acpi: add test case for -no-hpet
i386: acpi: Don't build HPET ACPI entry if HPET is disabled
hw/i386: declare ACPI mother board resource for MMCONFIG region
acpi: add test case for smm unsupported -machine smm=off
acpi: set fadt.smi_cmd to zero when SMM is not supported
acpi/core: always set SCI_EN when SMM isn't supported
ich9, piix4: add property, smm-compat, to keep compatibility of SMM
qtest: update tests/qtest/bios-tables-test-allowed-diff.h
checkpatch: don't emit warning on newly created acpi data files
tests/data/acpi/virt/DSDT.pxb: update with _CCA
acpi/gpex: Fix cca attribute check for pxb device
acpi: Allow pxb DSDT acpi table changes
pcie: don't set link state active if the slot is empty
failover: really display a warning when the primary device is not found
virtio-net: add missing object_unref()
pci: cleanup failover sanity check
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bus lock debug exception is a feature that can notify the kernel by
generate an #DB trap after the instruction acquires a bus lock when
CPL>0. This allows the kernel to enforce user application throttling or
mitigations.
This feature is enumerated via CPUID.(EAX=7,ECX=0).ECX[bit 24].
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20210202090224.13274-1-chenyi.qiang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"+foo" or "-foo"
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-11-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"+foo" or "-foo"
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-10-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
The on|off syntax has been supported since -vnc switched to use
QemuOpts in commit 4db14629c3
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-9-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-8-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
The on|off syntax has been supported since -vnc switched to use
QemuOpts in commit 4db14629c3
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-7-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-6-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-5-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-4-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-3-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-2-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch checks that ioc is not null before
using it in tcp socket tcp_chr_add_watch function.
The failure occurs in replay mode of the execution,
when monitor and serial port are tcp servers,
and there are no clients connected to them:
-monitor tcp:127.0.0.1:8081,server,nowait
-serial tcp:127.0.0.1:8082,server,nowait
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <161284977034.741841.12565530923825663110.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command complete callback has a SCSIRequest as the first argument,
and the status field of that structure is identical to the 'status'
argument. So drop the argument from the callback.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Message-Id: <20201116184041.60465-3-hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now, recoverable sense values are only passed directly to the
guest only for rerror=report. However, when rerror/werror are 'stop'
we still don't want the host to be involved on every UNIT ATTENTION
(especially considered that the QMP event will not have enough information
to act on the report).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of fishing it from *r->status, just pass the SCSI status
as a positive value of the second parameter and an errno as a
negative value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new function is an extension of the switch statement in scsi-disk.c
which also includes the errno cases only found in sg_io_sense_from_errno.
This allows us to consolidate the errno handling.
Extracted from a patch by Hannes Reinecke <hare@suse.de>.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When requested to ignore errors, just do nothing and let the
request complete normally. This means that the request will
be accounted correctly.
This is what commit 40dce4ee61 ("scsi-disk: fix rerror/werror=ignore",
2018-10-19) was supposed to do:
Fixes: 40dce4ee61 ("scsi-disk: fix rerror/werror=ignore", 2018-10-19)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If virtio_scsi_dataplane_start fails, there is a small window when it drops the
aio lock (in aio_wait_bh_oneshot) and the dataplane's AIO handler can
still run during that window.
This is done after the dataplane was marked as fenced, thus we use this flag
to avoid it doing any IO.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201217150040.906961-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'enospc' is the default for -drive, but qemu allows user to set
drive option werror. If werror of scsi-generic is set to 'report'
by user, qemu will not allow vm to start.
This patch allow user to set werror as 'report' for scsi-generic.
Signed-off-by: Zihao Chang <changzihao1@huawei.com>
Reviewed-by: Fam Zheng <fam@euphon.net>
Message-Id: <20201103061240.1364-1-changzihao1@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add tracepoints for SG_IO commands to allow for debugging
of SG_IO commands.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Message-Id: <20201116183114.55703-4-hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current code sets an infinite timeout on SG_IO requests,
causing the guest to stall if the host experiences a frame
loss.
This patch adds an 'io_timeout' parameter for SCSIDevice to
make the SG_IO timeout configurable, and also shortens the
default timeout to 30 seconds to avoid infinite stalls.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Message-Id: <20201116183114.55703-3-hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With --enable-fuzzing, QEMU_CFLAGS include -fsanitize=fuzzer-no-link.
This should allow us to build non-fuzzer binaries using objects
instrumented for fuzzing. However, to do that, we also need to link with
-fsanitize=fuzzer-no-link. We were not doing that.
Reported-by: Li Qiang <liq3ea@163.com>,
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210221174510.22542-1-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before this change, the code signed during the build was installed
directly.
However, the signature gets invalidated because meson modifies the code
to fix dynamic library install names during the install process.
It also prevents meson to strip the code because the pre-signed file is
not marked as an executable (although it is somehow able to perform the
modification described above).
With this change, the unsigned code will be installed and modified by
meson first, and a script signs it later.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <20210225000614.46919-1-akihiko.odaki@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
