Commit Graph

27 Commits

Author SHA1 Message Date
John Snow fc3d8e1138 AHCI: Protect cmd register
Many bits in the CMD register are supposed to be strictly read-only.
We should not be deleting them on every write.

As a side-effect: pay explicit attention to when a guest marks off
the FIS Receive or Start bits, and disable the status bits ourselves,
instead of letting them implicitly fall off.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1426283454-15590-3-git-send-email-jsnow@redhat.com
2015-03-27 15:48:11 -04:00
Stefan Hajnoczi 17fcb74af9 ahci: replace SATA FIS type magic numbers with constants
SATA 3.0 "10.3.1 FIS Type values" defines the constants used to
differentiate between FIS types.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1415874281-7371-3-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-12-10 10:31:12 +01:00
John Snow 72a065dbb1 ahci: add is_ncq predicate helper
A small helper to determine which S/ATA commands
are destined to be routed to the NCQ pathways.

This references SATA 3.2 section 13.6,
Native Command Queueing. See sections 13.6.4,
13.6.5, 13.6.6, 13.6.7 and 13.6.8 for all
SATA commands considered to be part of the
NCQ feature set. This is summarized in a small
list in section 13.6.3.1 and again in 13.6.3.2.

Not all of these NCQ commands are currently supported,
so the error pathways are adjusted slightly to be more
informative in the case they are encountered.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1415058979-16604-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-14 09:20:35 +00:00
John Snow 54a7f8f38d ahci: Fix SDB FIS Construction
The SDB FIS creation was mangled;
We were writing the error byte to byte 0,
and omitting the SDB FIS magic byte.

Though the SDB packet layout states that:
byte 0: Must be 0xA1 to indicate SDB FIS.
byte 1: Port multiplier select & other flags
byte 2: status byte.
byte 3: error byte.

This patch adds an SDB FIS structure with
human-readable names, and ensures that we
are filling the structure appropriately.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412204151-18117-7-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-03 09:48:41 +00:00
Markus Armbruster 7c84b1b831 block: Rename BlockDriverAIOCB* to BlockAIOCB*
I'll use BlockDriverAIOCB with block backends shortly, and the name is
going to fit badly there.  It's a block layer thing anyway, not just a
block driver thing.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 13:41:27 +02:00
John Snow d93162e13c q35/ahci: Pick up -cdrom and -hda options
This patch implements the backend for the Q35 board
for us to be able to pick up and use drives defined
by the -cdrom, -hda, or -drive if=ide shorthand options.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1412187569-23452-7-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-03 10:30:33 +01:00
Paolo Bonzini 1f88f77348 ahci: remove duplicate PORT_IRQ_* constants
These are defined twice, just use one set consistently.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:12 +01:00
Reza Jelveh d02f8adc6d ahci.c: mask unused flags when reading size PRDT DBC
The data byte count(DBC) read from the description information is defined for
bits 21:00. Bits 30:22 are reserved and bit 31 is the Interrupt on Completion
(I) flag.

Completion interrupts are triggered after every transaction instead of on
I-flag in QEMU. tbl_entry_size is a signed integer and improperly reading the
DBC leads to a negative offset that causes sglist allocation to fail.

Signed-off-by: Reza Jelveh <reza.jelveh@tuhh.de>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-07 09:15:29 +02:00
Peter Maydell 2c02f88780 hw/ide/ahci.h: Avoid shifting left into sign bit
Add 'U' suffixes to avoid undefined behaviour shifting left into
the signed bit of a signed integer type. Clang's sanitizer will
warn about this:

 hw/ide/ahci.c:1210:27: runtime error: left shift of 1 by 31 places cannot be represented in type 'int'

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-07 11:29:21 +01:00
Andreas Färber 0d3aea5603 ide/ich: QOM parent field cleanup
Replace direct uses of AHCIPCIState::card with QOM casts and rename it
to parent_obj.

Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 00:37:33 +02:00
Peter Crosthwaite fd58922cf4 ide/ich: QOM Upcast Sweep
Define and use standard QOM cast macro. Remove usages of DO_UPCAST()
and direct -> style upcasting.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[AF: Renamed to TYPE_ICH9_AHCI and used typedef in pci_ich9_reset()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 00:37:33 +02:00
Paolo Bonzini df32fd1c9f dma: eliminate DMAContext
The DMAContext is a simple pointer to an AddressSpace that is now always
already available.  Make everyone hold the address space directly,
and clean up the DMA API to use the AddressSpace directly.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-20 16:39:52 +02:00
Jason Baron a26230218d ahci: Add migration support
Jason tested these patches by migrating Windows 7 and Fedora 17 guests
(while under I/O) on both piix with ahci attached and on q35 (which has
a built-in AHCI controller).

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:36 +01:00
Kevin Wolf 4ac557c89b ahci: Change data types in preparation for migration
The size of an int depends on the host, so in order to be able to
migrate these fields, make them either int32_t or bool, depending on the
use.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:36 +01:00
Jason Baron 1147bb15a7 ahci: Remove unused AHCIDevice fields
'dma_status' and 'dma_cb' are written to, but never read.
Remove these fields in preparation for AHCI migration bits.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-01-25 18:18:36 +01:00
David Gibson 10ca2943aa ide/ahci: Use universal DMA helper functions
The AHCI device can provide both PCI and SysBus AHCI device
emulations.  For this reason, it wasn't previously converted to use
the pci_dma_*() helper functions.  Now that we have universal DMA
helper functions, this converts AHCI to use them.

The DMAContext is obtained from pci_dma_context() in the PCI case and
set to NULL in the SysBus case (i.e. we assume for now that a SysBus
AHCI has no IOMMU translation).

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 16:33:25 -05:00
Jan Kiszka 8ab60a0703 ahci: Clean up reset functions
Properly register reset functions via the device class.

CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-06-07 17:18:59 +03:00
Daniel Verkamp 465f1ab161 ahci: add port I/O index-data pair
Implement an I/O space index-data register pair as defined by the AHCI
spec, including the corresponding SATA PCI capability and BAR.

This allows real-mode code to access the AHCI registers; real-mode
code cannot address the memory-mapped register space because it is
beyond the first megabyte.

Signed-off-by: Daniel Verkamp <daniel@drv.nu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-21 14:32:20 +02:00
Stefan Weil 847f171e6a ahci: Remove unused struct member
Member variable is_read is written, but never read
(contrary to its name). Remove it.

Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12 15:17:22 +02:00
Stefan Weil 541dc0d47f Use new macro QEMU_PACKED for packed structures
Most changes were made using these commands:

git grep -la '__attribute__((packed))'|xargs perl -pi -e 's/__attribute__\(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/'
git grep -la '__attribute__((__packed__))'|xargs perl -pi -e 's/__attribute__\(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute__ ((__packed__))'|xargs perl -pi -e 's/__attribute__ \(\(__packed__\)\)/QEMU_PACKED/'
git grep -la '__attribute((packed))'|xargs perl -pi -e 's/__attribute\(\(packed\)\)/QEMU_PACKED/'

Whitespace in linux-user/syscall_defs.h was fixed manually
to avoid warnings from scripts/checkpatch.pl.

Manual changes were also applied to hw/pc.c.

I did not fix indentation with tabs in block/vvfat.c.
The patch will show 4 errors with scripts/checkpatch.pl.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-03 10:45:59 +00:00
Christoph Hellwig a597e79ce1 block: explicit I/O accounting
Decouple the I/O accounting from bdrv_aio_readv/writev/flush and
make the hardware models call directly into the accounting helpers.

This means:
 - we do not count internal requests from image formats in addition
   to guest originating I/O
 - we do not double count I/O ops if the device model handles it
   chunk wise
 - we only account I/O once it actuall is done
 - can extent I/O accounting to synchronous or coroutine I/O easily
 - implement I/O latency tracking easily (see the next patch)

I've conveted the existing device model callers to the new model,
device models that are using synchronous I/O and weren't accounted
before haven't been updated yet.  Also scsi hasn't been converted
to the end-to-end accounting as I want to defer that after the pending
scsi layer overhaul.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-25 18:18:42 +02:00
Avi Kivity 67e576c262 ahci: convert to memory API
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08 10:22:29 -05:00
Avi Kivity 667bb59d23 ich/ahci: convert to pci_register_bar_simple()
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-04-07 13:56:46 +03:00
Alexander Graf 2c4b9d0ea4 ahci: make number of ports runtime determined
Different AHCI controllers have a different number of ports, so the core
shouldn't care about the amount of ports available.

This patch makes the number of ports available to the AHCI core runtime
configurable, allowing us to have multiple different AHCI implementations
with different amounts of ports.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-02-07 11:40:31 +01:00
Alexander Graf 87e62065bb ahci: send init d2h fis on fis enable
The drive sends a d2h init fis on initialization. Usually, the guest doesn't
receive fises yet at that point though, so the delivery is deferred.

Let's reflect that by sending the init fis on fis receive enablement.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-02-07 11:38:35 +01:00
Alexander Graf f83a40dcd7 ahci: add license header in ahci.h
Due to popular request, this patch adds a license header to ahci.h

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-02-07 11:35:03 +01:00
Sebastian Herbszt 03c7a6a8e7 ahci: split ICH9 from core
There are multiple ahci devices out there. The currently implemented ich-9
is only one of the many. So let's split that one out into a separate file
to stress the difference.

Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-02-07 11:14:01 +01:00