Add support for stripping/inserting VLAN for VFs.
Had to move CSUM calculation back into the for loop, since packet data
is pulled inside the loop based on strip VLAN decision for every VF.
net_rx_pkt_fix_l4_csum should be extended to accept a buffer instead for
igb. Work for a future patch.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Please note that loopback counters for VM to VM traffic is not
implemented yet: VFGOTLBC, VFGPTLBC, VFGORLBC and VFGPRLBC.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
RSS for VFs is only enabled if VMOLR[n].RSSE is set.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
IGB uses RXDW ICR bit to indicate that rx descriptor has been written
back. This is the same as RXT0 bit in older HW.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use PFRSTD to reset RSTI bit for VFs, and raise VFLRE interrupt when VF
is reset.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Align the l3_hdr member of NetTxPkt by defining it as a union of
ip_header, ip6_header, and an array of octets.
Fixes: e263cd49c7 ("Packet abstraction for VMWARE network devices")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1544
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
No segmentation should be performed if gso type is
VIRTIO_NET_HDR_GSO_NONE even if ECN bit is set.
Fixes: e263cd49c7 ("Packet abstraction for VMWARE network devices")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1544
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
igb used to specify the PF as DMA requester when reading Tx packets.
This made Tx requests from VFs to be performed on the address space of
the PF, defeating the purpose of SR-IOV. Add some logic to change the
requester depending on the queue, which can be assigned to a VF.
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The current implementation of igb uses only part of a advanced Tx
context descriptor and first data descriptor because it misses some
features and sniffs the trait of the packet instead of respecting the
packet type specified in the descriptor. However, we will certainly
need the entire Tx context descriptor when we update igb to respect
these ignored fields. Save the entire context descriptor and first
data descriptor except the buffer address to prepare for such a change.
This also introduces the distinction of contexts with different
indexes, which was not present in e1000e but in igb.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This change introduces emulation for the Intel 82576 adapter, AKA igb.
The details of the device will be provided by the documentation that
will follow this change.
This initial implementation of igb does not cover the full feature set,
but it selectively implements changes necessary to pass tests of Linut
Test Project, and Windows HLK. The below is the list of the implemented
changes; anything not listed here is not implemented:
New features:
- igb advanced descriptor handling
- Support of 16 queues
- SRRCTL.BSIZEPACKET register field
- SRRCTL.RDMTS register field
- Tx descriptor completion writeback
- Extended RA registers
- VMDq feature
- MRQC "Multiple Receive Queues Enable" register field
- DTXSWC.Loopback_en register field
- VMOLR.ROMPE register field
- VMOLR.AUPE register field
- VLVF.VLAN_id register field
- VLVF.VI_En register field
- VF
- Mailbox
- Reset
- Extended interrupt registers
- Default values for IGP01E1000 PHY registers
Removed features:
- e1000e extended descriptor
- e1000e packet split descriptor
- Legacy descriptor
- PHY register paging
- MAC Registers
- Legacy interrupt timer registers
- Legacy EEPROM registers
- PBA/POEM registers
- RSRPD register
- RFCTL.ACKDIS
- RCTL.DTYPE
- Copper PHY registers
Misc:
- VET register format
- ICR register format
Signed-off-by: Gal Hammer <gal.hammer@sap.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
[Jason: don't abort on msi(x)_init()]
Signed-off-by: Jason Wang <jasowang@redhat.com>
Some definitions in the header files are invalid for igb so extract
them to new header files to keep igb from referring to them.
Signed-off-by: Gal Hammer <gal.hammer@sap.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
igb, a new network device emulation, will need SCTP checksum offloading.
Currently eth_get_protocols() has a bool parameter for each protocol
currently it supports, but there will be a bit too many parameters if
we add yet another protocol.
Introduce an enum type, EthL4HdrProto to represent all L4 protocols
eth_get_protocols() support with one parameter.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The system clock is necessary to implement PTP features. While we are
not implementing PTP features for e1000e yet, we do have a plan to
implement them for igb, a new network device derived from e1000e,
so add system clock to the common base first.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The values returned by eth_get_protocols() are used to perform RSS,
checksumming and segmentation. Even when a packet signals the use of the
protocols which these operations can be applied to, the headers for them
may not be present because of too short packet or fragmentation, for
example. In such a case, the operations cannot be applied safely.
Report the presence of headers instead of whether the use of the
protocols are indicated with eth_get_protocols(). This also makes
corresponding changes to the callers of eth_get_protocols() to match
with its new signature and to remove redundant checks for fragmentation.
Fixes: 75020a7021 ("Common definitions for VMWARE devices")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The datasheet 8.19.29 "Good Packets Transmitted Count - GPTC (0x04080;
RC)" says:
> This register counts the number of good (no errors) packets
> transmitted. A good transmit packet is considered one that is 64 or
> more bytes in length (from <Destination Address> through <CRC>,
> inclusively) in length.
It also says similar for the other Tx statistics registers. Add the
number of bytes for CRC to those registers.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The Software Developer's Manual 13.7.4.5 "Packets Transmitted (64 Bytes)
Count" says:
> This register counts the number of packets transmitted that are
> exactly 64 bytes (from <Destination Address> through <CRC>,
> inclusively) in length.
It also says similar for the other Tx statistics registers. Add the
number of bytes for CRC to those registers.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Whether a packet will be written back to the guest depends on the
remaining space of the queue. Therefore, e1000e_rx_written_to_guest and
e1000e_rx_not_written_to_guest should log the index of the queue instead
of generated interrupts. This also removes the need of
e1000e_rx_rss_dispatched_to_queue, which logs the queue index.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Assertions will fail if MSI-X gets disabled while a timer for MSI-X
interrupts is running so remove them to avoid abortions. Fortunately,
nothing bad happens even if the assertions won't trigger as
msix_notify(), called by timer handlers, does nothing when MSI-X is
disabled.
This bug was found by Alexander Bulekov when fuzzing igb, a new
device implementation derived from e1000e:
https://patchew.org/QEMU/20230129053316.1071513-1-alxndr@bu.edu/
The fixed test case is:
fuzz/crash_aea040166819193cf9fedb810c6d100221da721a
Fixes: 6f3fbe4ed0 ("net: Introduce e1000e device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Check the payload length if checksumming to ensure the payload contains
the space for the resulting value.
This bug was found by Alexander Bulekov with the fuzzer:
https://patchew.org/QEMU/20230129053316.1071513-1-alxndr@bu.edu/
The fixed test case is:
fuzz/crash_6aeaa33e7211ecd603726c53e834df4c6d1e08bc
Fixes: e263cd49c7 ("Packet abstraction for VMWARE network devices")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
There was no proper implementation of TCP segmentation before this
change, and net_tx_pkt relied solely on IPv4 fragmentation. Not only
this is not aligned with the specification, but it also resulted in
corrupted IPv6 packets.
This is particularly problematic for the igb, a new proposed device
implementation; igb provides loopback feature for VMDq and the feature
relies on software segmentation.
Implement proper TCP segmentation in net_tx_pkt to fix such a scenario.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
e1000e didn't perform software segmentation for loopback if virtio-net
header is enabled, which is wrong.
To fix the problem, introduce net_tx_pkt_send_custom(), which allows the
caller to specify whether offloading should be assumed or not.
net_tx_pkt_send_custom() also allows the caller to provide a custom
sending function. Packets with virtio-net headers and ones without
virtio-net headers will be provided at the same time so the function
can choose the preferred version. In case of e1000e loopback, it prefers
to have virtio-net headers as they allows to skip the checksum
verification if VIRTIO_NET_HDR_F_DATA_VALID is set.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When virtio-net header is not set, net_rx_pkt_get_vhdr() returns
zero-filled virtio_net_hdr, which is actually valid. In fact, tap device
uses zero-filled virtio_net_hdr when virtio-net header is not provided
by the peer. Therefore, we can just remove net_rx_pkt_has_virt_hdr() and
always assume NetTxPkt has a valid virtio-net header.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The new function qemu_get_using_vnet_hdr() allows to automatically
determine if virtio-net header is used.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
e1000x_is_vlan_packet() had a pointer to uint8_t as a parameter, but
it does not have to be uint8_t. Change the type to void *.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
net_tx_pkt_build_vheader() inspects TCP header but had no check for
the header size, resulting in an undefined behavior. Check the header
size and drop the packet if the header is too small.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
e1000e_write_packet_to_guest() passes the reference of variable ba as a
pointer to an array, and that pointer indirection is just unnecessary;
all functions which uses the passed reference performs no pointer
operation on the pointer and they simply dereference the passed
pointer. Remove the extra pointer indirection.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This keeps Windows driver 12.18.9.23 from generating an event with ID
30. The description of the event is as follows:
> Intel(R) 82574L Gigabit Network Connection
> PROBLEM: The network adapter is configured for auto-negotiation but
> the link partner is not. This may result in a duplex mismatch.
> ACTION: Configure the link partner for auto-negotiation.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Before this change, e1000e_write_packet_to_guest() allocated the
receive descriptor buffer as an array of uint8_t. This does not ensure
the buffer is sufficiently aligned.
Introduce e1000_rx_desc_union type, a union type of all receive
descriptor types to correct this.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is part of recent efforts of refactoring e1000 and e1000e.
DeviceClass's reset member is deprecated so migrate to ResettableClass.
There is no behavioral difference.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is part of recent efforts of refactoring e1000 and e1000e.
DeviceClass's reset member is deprecated so migrate to ResettableClass.
There is no behavioral difference.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This change makes e1000e reset more things when software reset was
triggered. Some registers are exempted from software reset in the
datasheet and this change also implements the behavior accordingly.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
They are duplicate of running throttling timer flags and incomplete as
the flags are not cleared when the interrupts are fired or the device is
reset.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use memcpy instead of memmove to initialize registers. The initial
register templates and register table instances will never overlap.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use memcpy instead of memmove to initialize registers. The initial
register templates and register table instances will never overlap.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When a register has effective bits fewer than their width, the old code
inconsistently masked when writing or reading. Make the code consistent
by always masking when writing, and remove some code duplication.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
e1000e_set_16bit and e1000e_set_12bit look so similar so define a
generic macro.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When a register has effective bits fewer than their width, the old code
inconsistently masked when writing or reading. Make the code consistent
by always masking when writing, and remove some code duplication.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
hw/net/mii.h provides common definitions for MII.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
hw/net/mii.h provides common definitions for MII.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
igb implementation first starts off by copying e1000e code. Correct the
code style before that.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
XC_PAGE_SIZE comes from the actual Xen libraries, while XEN_PAGE_SIZE is
provided by QEMU itself in xen_backend_ops.h. For backends which may be
built for emulation mode, use the latter.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The previous commit introduced redirectable gnttab operations fairly
much like-for-like, with the exception of the extra arguments to the
->open() call which were always NULL/0 anyway.
This *changes* the arguments to the ->unmap() operation to include the
original ref# that was mapped. Under real Xen it isn't necessary; all we
need to do from QEMU is munmap(), then the kernel will release the grant,
and Xen does the tracking/refcounting for the guest.
When we have emulated grant tables though, we need to do all that for
ourselves. So let's have the back ends keep track of what they mapped
and pass it in to the ->unmap() method for us.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Since GUEST_ANNOUNCE is emulated the feature bit could be set without
backend support. This happens in the vDPA case.
However, backend vDPA parent may not have CVQ support. This causes an
incoherent feature set, and the driver may refuse to start. This
happens in virtio-net Linux driver.
This may be solved differently in the future. Qemu is able to emulate a
CVQ just for guest_announce purposes, helping guest to notify the new
location with vDPA devices that does not support it. However, this is
left as a TODO as it is way more complex to backport.
Tested with vdpa_net_sim, toggling manually VIRTIO_NET_F_CTRL_VQ in the
driver and migrating it with x-svq=on.
Fixes: 980003debd ("vdpa: do not handle VIRTIO_NET_F_GUEST_ANNOUNCE in vhost-vdpa")
Reported-by: Dawar, Gautam <gautam.dawar@amd.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230124161159.2182117-1-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Gautam Dawar <gautam.dawar@amd.com>
Tested-by: Gautam Dawar <gautam.dawar@amd.com>
Tested-by: Lei Yang <leiyang@redhat.com>
The QERR_ macros are leftovers from the days of "rich" error objects.
We've been trying to reduce their remaining use.
The stubbed out Rocker monitor commands are the last remaining users
of QERR_FEATURE_DISABLED. They fail like this:
(qemu) info rocker mumble
Error: The feature 'rocker' is not enabled
The real rocker commands fail like this when the named object doesn't
exist:
Error: rocker mumble not found
If that's good enough when Rocker is enabled, then it's good enough
when it's disabled, so replace QERR_FEATURE_DISABLED with that, and
drop the macro.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-13-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Currently, VMXNET3_MAX_MTU itself (being 9000) is not considered a
valid value for the MTU, but a guest running ESXi 7.0 might try to
set it and fail the assert [0].
In the Linux kernel, dev->max_mtu itself is a valid value for the MTU
and for the vmxnet3 driver it's 9000, so a guest running Linux will
also fail the assert when trying to set an MTU of 9000.
VMXNET3_MAX_MTU and s->mtu don't seem to be used in relation to buffer
allocations/accesses, so allowing the upper limit itself as a value
should be fine.
[0]: https://forum.proxmox.com/threads/114011/
Fixes: d05dcd94ae ("net: vmxnet3: validate configuration values during activate (CVE-2021-20203)")
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch replaces hw_error to guest error log for [read|write]b
accesses when mode_16bit is enabled. This avoids aborting qemu.
Fixes: 1248f8d4cb ("hw/lan9118: Add basic 16-bit mode support.")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1433
Reported-by: Qiang Liu <cyruscyliu@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Qiang Liu <cyruscyliu@gmail.com>
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
