Commit Graph

15 Commits

Author SHA1 Message Date
Alberto Garcia 764ba3ae51 block: remove redundant check before g_slist_find()
An empty GSList is represented by a NULL pointer, therefore it's a
perfectly valid argument for g_slist_find() and there's no need to
make any additional check.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 1435583533-5758-1-git-send-email-berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-02 10:06:23 +01:00
Fam Zheng 508249952c block: Fix dirty bitmap in bdrv_co_discard
Unsetting dirty globally with discard is not very correct. The discard may zero
out sectors (depending on can_write_zeroes_with_unmap), we should replicate
this change to destination side to make sure that the guest sees the same data.

Calling bdrv_reset_dirty also troubles mirror job because the hbitmap iterator
doesn't expect unsetting of bits after current position.

So let's do it the opposite way which fixes both problems: set the dirty bits
if we are to discard it.

Reported-by: wangxiaolong@ucloud.cn
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-02 10:06:23 +01:00
Fam Zheng ba3f0e2545 block: Add bdrv_get_block_status_above
Like bdrv_is_allocated_above, this function follows the backing chain until seeing
BDRV_BLOCK_ALLOCATED.  Base is not included.

Reimplement bdrv_is_allocated on top.

[Initialized bdrv_co_get_block_status_above() ret to 0 to silence
mingw64 compiler warning about the unitialized variable.  assert(bs !=
base) prevents that case but I suppose the program could be compiled
with -DNDEBUG.
--Stefan]

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-07-02 10:03:50 +01:00
Dimitris Aragiorgis 1b6bc94d5d Fix migration in case of scsi-generic
During migration, QEMU uses fsync()/fdatasync() on the open file
descriptor for read-write block devices to flush data just before
stopping the VM.

However, fsync() on a scsi-generic device returns -EINVAL which
causes the migration to fail. This patch skips flushing data in case
of an SG device, since submitting SCSI commands directly via an SG
character device (e.g. /dev/sg0) bypasses the page cache completely,
anyway.

Note that fsync() not only flushes the page cache but also the disk
cache. The scsi-generic device never sends flushes, and for
migration it assumes that the same SCSI device is used by the
destination host, so it does not issue any SCSI SYNCHRONIZE CACHE
(10) command.

Finally, remove the bdrv_is_sg() test from iscsi_co_flush() since
this is now redundant (we flush the underlying protocol at the end
of bdrv_co_flush() which, with this patch, we never reach).

Signed-off-by: Dimitris Aragiorgis <dimara@arrikto.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1435056300-14924-3-git-send-email-dimara@arrikto.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-23 15:08:52 +01:00
Alexander Yarygin f406c03c09 block: Let bdrv_drain_all() to call aio_poll() for each AioContext
After the commit 9b536adc ("block: acquire AioContext in
bdrv_drain_all()") the aio_poll() function got called for every
BlockDriverState, in assumption that every device may have its own
AioContext. If we have thousands of disks attached, there are a lot of
BlockDriverStates but only a few AioContexts, leading to tons of
unnecessary aio_poll() calls.

This patch changes the bdrv_drain_all() function allowing it find shared
AioContexts and to call aio_poll() only for unique ones.

Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1433936297-7098-4-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-23 15:06:16 +01:00
Markus Armbruster d49b683644 qerror: Move #include out of qerror.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Alberto Garcia 76f4afb40f throttle: Add throttle group support
The throttle group support use a cooperative round robin scheduling
algorithm.

The principles of the algorithm are simple:
- Each BDS of the group is used as a token in a circular way.
- The active BDS computes if a wait must be done and arms the right
  timer.
- If a wait must be done the token timer will be armed so the token
  will become the next active BDS.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: f0082a86f3ac01c46170f7eafe2101a92e8fde39.1433779731.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 14:00:00 +01:00
Benoît Canet 0e5b0a2d54 throttle: Extract timers from ThrottleState into a separate structure
Group throttling will share ThrottleState between multiple bs.
As a consequence the ThrottleState will be accessed by multiple aio
context.

Timers are tied to their aio context so they must go out of the
ThrottleState structure.

This commit paves the way for each bs of a common ThrottleState to
have its own timer.

Signed-off-by: Benoit Canet <benoit.canet@nodalink.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 6cf9ea96d8b32ae2f8769cead38f68a6a0c8c909.1433779731.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 14:00:00 +01:00
Paolo Bonzini a53f1a95f9 block: get_block_status: use "else" when testing the opposite condition
A bit of Boolean algebra (and common sense) tells us that the
second "if" here is looking for blocks that are not allocated.
This is the opposite of the "if" that sets BDRV_BLOCK_ALLOCATED,
and thus it can use an "else".

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1431599702-10431-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22 09:37:33 +01:00
Fam Zheng 9eeb6dd1b2 block: Fix NULL deference for unaligned write if qiov is NULL
For zero write, callers pass in NULL qiov (qemu-io "write -z" or
scsi-disk "write same").

Commit fc3959e466 fixed bdrv_co_write_zeroes which is the common case
for this bug, but it still exists in bdrv_aio_write_zeroes. A simpler
fix would be in bdrv_co_do_pwritev which is the NULL dereference point
and covers both cases.

So don't access it in bdrv_co_do_pwritev in this case, use three aligned
writes.

[Initialize ret to 0 in bdrv_co_do_zero_pwritev() to avoid uninitialized
variable warning with gcc 4.9.2.
--Stefan]

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1431522721-3266-3-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22 09:37:33 +01:00
Fam Zheng d01c07f222 Revert "block: Fix unaligned zero write"
This reverts commit fc3959e466.

The core write code already handles the case, so remove this
duplication.

Because commit 61007b316 moved the touched code from block.c to
block/io.c, the change is manually reverted.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1431522721-3266-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22 09:37:33 +01:00
Denis V. Lunev 459b4e6612 block: align bounce buffers to page
The following sequence
    int fd = open(argv[1], O_RDWR | O_CREAT | O_DIRECT, 0644);
    for (i = 0; i < 100000; i++)
            write(fd, buf, 4096);
performs 5% better if buf is aligned to 4096 bytes.

The difference is quite reliable.

On the other hand we do not want at the moment to enforce bounce
buffering if guest request is aligned to 512 bytes.

The patch changes default bounce buffer optimal alignment to
MAX(page size, 4k). 4k is chosen as maximal known sector size on real
HDD.

The justification of the performance improve is quite interesting.
From the kernel point of view each request to the disk was split
by two. This could be seen by blktrace like this:
  9,0   11  1     0.000000000 11151  Q  WS 312737792 + 1023 [qemu-img]
  9,0   11  2     0.000007938 11151  Q  WS 312738815 + 8 [qemu-img]
  9,0   11  3     0.000030735 11151  Q  WS 312738823 + 1016 [qemu-img]
  9,0   11  4     0.000032482 11151  Q  WS 312739839 + 8 [qemu-img]
  9,0   11  5     0.000041379 11151  Q  WS 312739847 + 1016 [qemu-img]
  9,0   11  6     0.000042818 11151  Q  WS 312740863 + 8 [qemu-img]
  9,0   11  7     0.000051236 11151  Q  WS 312740871 + 1017 [qemu-img]
  9,0    5  1     0.169071519 11151  Q  WS 312741888 + 1023 [qemu-img]
After the patch the pattern becomes normal:
  9,0    6  1     0.000000000 12422  Q  WS 314834944 + 1024 [qemu-img]
  9,0    6  2     0.000038527 12422  Q  WS 314835968 + 1024 [qemu-img]
  9,0    6  3     0.000072849 12422  Q  WS 314836992 + 1024 [qemu-img]
  9,0    6  4     0.000106276 12422  Q  WS 314838016 + 1024 [qemu-img]
and the amount of requests sent to disk (could be calculated counting
number of lines in the output of blktrace) is reduced about 2 times.

Both qemu-img and qemu-io are affected while qemu-kvm is not. The guest
does his job well and real requests comes properly aligned (to page).

Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1431441056-26198-3-git-send-email-den@openvz.org
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22 09:37:33 +01:00
Denis V. Lunev 4196d2f030 block: minimal bounce buffer alignment
The patch introduces new concept: minimal memory alignment for bounce
buffers. Original so called "optimal" value is actually minimal required
value for aligment. It should be used for validation that the IOVec
is properly aligned and bounce buffer is not required.

Though, from the performance point of view, it would be better if
bounce buffer or IOVec allocated by QEMU will be aligned stricter.

The patch does not change any alignment value yet.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1431441056-26198-2-git-send-email-den@openvz.org
CC: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22 09:37:33 +01:00
Paolo Bonzini eaf5fe2dd4 block: return EPERM on writes or discards to read-only devices
This is the behavior in the operating system, for example Linux's
blkdev_write_iter has the following:

        if (bdev_read_only(I_BDEV(bd_inode)))
                return -EPERM;

This does not apply to opening a device for read/write, when the
device only supports read-only operation.  In this case any of
EACCES, EPERM or EROFS is acceptable depending on why writing is
not possible.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1431013548-22492-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-05-22 09:37:33 +01:00
Stefan Hajnoczi 61007b316c block: move I/O request processing to block/io.c
The block.c file has grown to over 6000 lines.  It is time to split this
file so there are fewer conflicts and the code is easier to maintain.

Extract I/O request processing code:
 * Read
 * Write
 * Zero writes and making the image empty
 * Flush
 * Discard
 * ioctl
 * Tracked requests and queuing
 * Throttling and copy-on-read
 * Block status and allocated functions
 * Refreshing block limits
 * Reading/writing vmstate
 * qemu_blockalign() and friends

The patch simply moves code from block.c into block/io.c.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-28 15:36:17 +02:00