It's been deprecated since QEMU v3.1. We've explicitly asked in the
deprecation message that people should speak up on qemu-devel in case
they are still actively using the bluetooth part of QEMU, but nobody
ever replied that they are really still using it.
I've tried it on my own to use this bluetooth subsystem for one of my
guests, but I was also not able to get it running anymore: When I was
trying to pass-through a real bluetooth device, either the guest did
not see the device at all, or the guest crashed.
Even worse for the emulated device: When running
qemu-system-x86_64 -bt device:keyboard
QEMU crashes once you hit a key.
So it seems like the bluetooth stack is not only neglected, it is
completely bitrotten, as far as I can tell. The only attention that
this code got during the past years were some CVEs that have been
spotted there. So this code is a burden for the developers, without
any real benefit anymore. Time to remove it.
Note: hw/bt/Kconfig only gets cleared but not removed here yet.
Otherwise there is a problem with the *-softmmu/config-devices.mak.d
dependency files - they still contain a reference to this file which
gets evaluated first on some build hosts, before the file gets
properly recreated. To avoid breaking these builders, we still need
the file around for some time. It will get removed in a couple of
weeks instead.
Message-Id: <20191120091014.16883-4-thuth@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch adds basic support for the NuBus bus. This is used by 680x0
Macintosh.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20191026164546.30020-8-laurent@vivier.eu>
The PL031 is a Real Time Clock, not a timer.
Move it under the hw/rtc/ subdirectory.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20191003230404.19384-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The device directories must be included only for softmmu builds.
Instead of repeating $(CONFIG_SOFTMMU), use an "if".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for having some more common semihosting code let's
excise the current config magic from vl.c into its own file. We shall
later add more conditionals to the build configurations so we can
avoid building this if we don't need it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190123065618.3520-38-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The VIRTIO_9P || VIRTFS && XEN condition can be computed in hw/Makefile.objs,
removing an "if" from hw/9pfs/Makefile.objs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make hw/vfio configurable and add new CONFIG_VFIO_* to the
default-configs/s390x*-softmmu.mak. This allow a finer-grain
selection of the various VFIO backends.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190202072456.6468-28-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of wrapping the entire Makefile.objs with an ifeq/endif, just
include the directory only for Linux.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190202072456.6468-4-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some architectures might support memory devices, while they don't
support DIMM/NVDIMM. So let's
- Rename CONFIG_MEM_HOTPLUG to CONFIG_MEM_DEVICE
- Introduce CONFIG_DIMM and use it similarly to CONFIG NVDIMM
CONFIG_DIMM and CONFIG_NVDIMM require CONFIG_MEM_DEVICE.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-7-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
A significant part of hyperv.c is not actually tied to x86, and can
be moved to hw/.
This will allow to maintain most of Hyper-V and VMBus
target-independent, and to avoid conflicts with inclusion of
arch-specific headers down the road in VMBus implementation.
Also this stuff can now be opt-out with CONFIG_HYPERV.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082041.29380-4-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As all mapping for this device are from driver to device,
declare wrappers on top of pci_dma_*map functions.
In addition, declare macros to be used for debug messages.
Reviewed-by: Dotan Barak <dotanb@mellanox.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Nothing in fsdev/ or hw/9pfs/ depends on pci; it should rather depend
on CONFIG_VIRTFS and CONFIG_VIRTIO/CONFIG_XEN only.
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Copy the mechanism of hw/smbios/smbios-stub.c to implement an ACPI-stub
instead, so that -acpitable can be later extended to ARM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-smbios command line options were accepted but silently ignored on
TARGET_ARM, due to a test for TARGET_I386 in arch_init.c.
Copy the mechanism of hw/pci/pci-stub.c to implement an smbios-stub
instead, enabled for all targets without CONFIG_SMBIOS.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Message-Id: <20161222151828.28292-1-leif.lindholm@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the STM32F2xx ADC device. This device randomly
generates values on each read.
This also includes creating a hw/adc directory.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 3240e660adaf537f55a63ce06096e844aece8cda.1474742262.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the basic IPMI types and infrastructure to QEMU. Low-level
interfaces and simulation interfaces will register with this; it's
kind of the go-between to tie them together.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To share smbios among different architectures, this patch moves SMBIOS
code (smbios.c and smbios.h) from x86 specific folders into new
hw/smbios directories. As a result, CONFIG_SMBIOS=y is defined in
x86 default config files.
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is done in preparation for the addition of VFIO platform
device support.
Signed-off-by: Kim Phillips <kim.phillips@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Each hotplug-able memory slot is a PCDIMMDevice.
A hot-add operation for a memory device:
- creates a new PCDIMMDevice and makes hotplug controller to map it into
guest address space
Hotplug operations are done through normal device_add commands.
For migration case, all hotplugged memory devices on source should be
specified on target's command line using '-device' option with
properties set to the same values as on source.
To simplify review, patch introduces only PCDIMMDevice QOM skeleton that
will be extended by following patches to implement actual memory hotplug
and related functions.
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After commit ba1183da9a we are including
hw/Makefile.objs directly from Makefile.target. Make sure hw/Makefile.objs
rules doesn't depend on variable defined in Makefile.objs
Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Move the header defining an IPackBus and IPackDevice base class into
a new include/ directory and move their implementation and a
PCI-IndustryPack bridge out of hw/char/ directory into a new hw/ipack/.
Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Turn PCMCIACardState into a device.
Move callbacks to new PCMCIACardClass.
Derive TYPE_MICRODRIVE from TYPE_PCMCIA_CARD.
Replace ide_init2_with_non_qdev_drives().
Signed-off-by: Othmar Pasteka <pasteka@kabsi.at>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The TPM subsystem does not have a full front-end/back-end separation.
The sole available backend, tpm_passthrough, depends on the data
structures of the sole available frontend, tpm_tis.
However, we can at least try to split the user interface (tpm.c) from the
implementation (hw/tpm). The patches makes tpm.c not include tpm_int.h,
which is shared between tpm_tis.c and tpm_passthrough.c; instead it
moves more stuff to tpm_backend.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Device model for Primecell PL330 DMA controller.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Tested-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 098aac26233d7334bed2bca4f06f539638ca6d24.1361853677.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The situation with device-hotplug.c is similar to qdev-monitor.c.
Add a stub for pci_drive_hot_add, so that it can be compiled once,
and move it out of hw/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qdev-monitor.c is the only "core qdev" file that is not used in
user-mode emulation, and it does not define anything that is used
by hardware models. Remove it from the hw/ directory and
remove hw/qdev-monitor.h from hw/qdev.h too; this requires
some files to have some new explicitly includes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Device model for standard SD Host Controller Interface (SDHCI) compliant with
version 2.00 of SD association specification.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
extra-obj-y is somewhat complicated to understand. Replace it with a
special CONFIG_ALL symbol that is defined only at toplevel.
This limits the case of directories defining more than one
*-obj-y target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All of universal-obj-y, user-obj-y (right now unused) and common-obj-y can
be unified into common-obj-y if we take care of defining CONFIG_SOFTMMU
and CONFIG_USER_ONLY in the toplevel makefile. This is similar to how
we define symbols for hardware components.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Introduce virtio-bus. Refactored transport device will create a bus which
extends virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The GE IP-Octal 232 is an IndustryPack module that implements eight
RS-232 serial ports, each one of which can be redirected to a
character device in the host.
Signed-off-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The TPCI200 is a PCI board that supports up to 4 IndustryPack modules.
A new bus type called 'IndustryPack' has been created so any
compatible module can be attached to this board.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The directory descent mechanism, and a less-flat tree both helped
in making some *-obj-y definitions very short. Many of these
often end up in universal-obj-y, and used to be separate only
because of libuser (which is now part of history...).
Consolidate these variables in a single one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Thomas Huth
Peter Maydell
Laurent Vivier
Philippe Mathieu-Daudé
Paolo Bonzini
Alex Bennée
David Hildenbrand
Roman Kagan
Yuval Shaia
Cornelia Huck
Leif Lindholm
Alistair Francis
Corey Minyard
Wei Huang
Kim Phillips
Vasilis Liaskovitis
Aneesh Kumar K.V
Andreas Färber
Dmitry Fleytman
Peter Crosthwaite
Igor Mitsyanko
Gerd Hoffmann
KONRAD Frederic
Alberto Garcia