Unlike SPICE, egl-headless doesn't offer a way of specifying the DRM
node used for OpenGL, hence QEMU always selecting the first one that is
available. Thus, add the 'rendernode' option for egl-headless to QAPI.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Message-id: 7658e15eca72d520e7a5fb1c2e724702d83d4f7f.1542362949.git.eskultet@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If a management application builds the block graph node by node, the
protocol layer doesn't inherit its read-only option from the format
layer any more, so it must be set explicitly.
Backing files should work on read-only storage, but at the same time, a
block job like commit should be able to reopen them read-write if they
are on read-write storage. However, without option inheritance, reopen
only changes the read-only option for the root node (typically the
format layer), but not the protocol layer, so reopening fails (the
format layer wants to get write permissions, but the protocol layer is
still read-only).
A simple workaround for the problem in the management tool would be to
open the protocol layer always read-write and to make only the format
layer read-only for backing files. However, sometimes the file is
actually stored on read-only storage and we don't know whether the image
can be opened read-write (for example, for NBD it depends on the server
we're trying to connect to). This adds an option that makes QEMU try to
open the image read-write, but allows it to degrade to a read-only mode
without returning an error.
The documentation for this option is consciously phrased in a way that
allows QEMU to switch to a better model eventually: Instead of trying
when the image is first opened, making the read-only flag dynamic and
changing it automatically whenever the first BLK_PERM_WRITE user is
attached or the last one is detached would be much more useful
behaviour.
Unfortunately, this more useful behaviour is also a lot harder to
implement, and libvirt needs a solution now before it can switch to
-blockdev, so let's start with this easier approach for now.
Instead of adding a new auto-read-only option, turning the existing
read-only into an enum (with a bool alternate for compatibility) was
considered, but it complicated the implementation to the point that it
didn't seem to be worth it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
New option "websocket" added to allow using WebSocket protocol for
chardev socket backend.
Example:
-chardev socket,websocket,server,id=...
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <20181018223501.21683-3-jusual@mail.ru>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This structure and command have missed qemu version 3.0, so fix it to since version 3.1.
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Message-Id: <20181022164118.5502-1-zhangckid@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
New action is like clean action: do the whole thing in .prepare and
undo in .abort. This behavior for bitmap-changing actions is needed
because backup job actions use bitmap in .prepare.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
It is only an oversight that we don't allow incremental backup with
blockdev-backup. Add the bitmap argument which enables this.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20180830211605.13683-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Some architectures might support memory devices, while they don't
support DIMM/NVDIMM. So let's
- Rename CONFIG_MEM_HOTPLUG to CONFIG_MEM_DEVICE
- Introduce CONFIG_DIMM and use it similarly to CONFIG NVDIMM
CONFIG_DIMM and CONFIG_NVDIMM require CONFIG_MEM_DEVICE.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181005092024.14344-7-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This new usernet option can be used to add data for option 66 (tftp
server name) in the BOOTP reply, which is useful in PXE based automatic
OS install such as OpenBSD.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Return value of qemu_timedate_diff(), used for calculation offset in
QAPI 'RTC_CHANGE' event, restored to keep compatibility. Since it
wasn't documented that difference is relative to host clock
advancement, this change also adds important note to 'RTC_CHANGE'
event description to highlight established implementation specifics.
Signed-off-by: Artem Pisarenko <artem.k.pisarenko@gmail.com>
Message-Id: <1fc12c77e8b7115d3842919a8b586d9cbe4efca6.1539846575.git.artem.k.pisarenko@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Libvirt or other high level software can use this command query colo status.
You can test this command like that:
{'execute':'query-colo-status'}
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Suggested by Markus Armbruster rename COLO unknown mode to none mode.
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If some errors happen during VM's COLO FT stage, it's important to
notify the users of this event. Together with 'x-colo-lost-heartbeat',
Users can intervene in COLO's failover work immediately.
If users don't want to get involved in COLO's failover verdict,
it is still necessary to notify users that we exited COLO mode.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
According to PCI specification, subsystem id and subsystem vendor id
are present only in type 0 and type 2 headers (at different offsets),
but not in type 1 headers.
Thus we should make this data optional in struct PciDeviceId and skip
reporting them via HMP if the information is not available.
Additional (wrong information) about PCI bridges (Type1 devices) has been
added in 5383a705 and fortunately not released. This patch fixes that
problem. The problem was spotted by Markus.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181002135538.12113-1-den@openvz.org>
Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Remove repetition of 'independent of'. While at it, s/QMU/QEMU in
@CpuDefinitionInfo.
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20181003104605.8477-1-kchamart@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[Commit message updated as requested by Kashyap]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
- qcow2 cache option default changes (Linux: 32 MB maximum, limited by
whatever cache size can be made use of with the specific image;
default cache-clean-interval of 10 minutes)
- reopen: Allow specifying unchanged child node references, and changing
a few generic options (discard, detect-zeroes)
- Fix werror/rerror defaults for -device drive=<node-name>
- Test case fixes
-----BEGIN PGP SIGNATURE-----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=ai81
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2 cache option default changes (Linux: 32 MB maximum, limited by
whatever cache size can be made use of with the specific image;
default cache-clean-interval of 10 minutes)
- reopen: Allow specifying unchanged child node references, and changing
a few generic options (discard, detect-zeroes)
- Fix werror/rerror defaults for -device drive=<node-name>
- Test case fixes
# gpg: Signature made Mon 01 Oct 2018 18:17:35 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (23 commits)
tests/test-bdrv-drain: Fix too late qemu_event_reset()
test-replication: Lock AioContext around blk_unref()
qcow2: Fix cache-clean-interval documentation
block-backend: Set werror/rerror defaults in blk_new()
qcow2: Explicit number replaced by a constant
qcow2: Set the default cache-clean-interval to 10 minutes
qcow2: Resize the cache upon image resizing
qcow2: Increase the default upper limit on the L2 cache size
qcow2: Assign the L2 cache relatively to the image size
qcow2: Avoid duplication in setting the refcount cache size
qcow2: Make sizes more humanly readable
include: Add a lookup table of sizes
qcow2: Options' documentation fixes
block: Allow changing 'detect-zeroes' on reopen
block: Allow changing 'discard' on reopen
file-posix: Forbid trying to change unsupported options during reopen
block: Forbid trying to change unsupported options during reopen
block: Allow child references on reopen
block: Don't look for child references in append_open_options()
block: Remove child references from bs->{options,explicit_options}
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fixing cache-clean-interval documentation following the recent change to
a default of 600 seconds on supported plarforms (only Linux currently).
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The default cache-clean-interval is set to 10 minutes, in order to lower
the overhead of the qcow2 caches (before the default was 0, i.e.
disabled).
* For non-Linux platforms the default is kept at 0, because
cache-clean-interval is not supported there yet.
Signed-off-by: Leonid Bloch <lbloch@janustech.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This allows to set the option on the command line, i.e. "-display
gtk,zoom-to-fit={on,off}", overriding the default chosen by qemu.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20180827095620.26774-1-kraxel@redhat.com
Fixes for external clients; add reminder to revisit naming of x- command
- Vladimir Sementsov-Ogievskiy: nbd/server: send more than one extent of base:allocation context
- John Snow: qapi: bitmap-merge: document name change
- Vladimir Sementsov-Ogievskiy: nbd/server: fix bitmap export
-----BEGIN PGP SIGNATURE-----
Comment: Public key at http://people.redhat.com/eblake/eblake.gpg
iQEcBAABCAAGBQJbrEMDAAoJEKeha0olJ0NqVUMIAIsPETUWAbMbulGYqO9Q4HDz
VCAJDYWW8QbxIngO1pXrfno7+VGfs6jN5H2FIc8fTQNh4hFQkDYTSn0PBoGQQifH
BcS9aevHADGOqgx1E/i0trBBtSagrYcig5ZbPQnm3gNO0u7c2Mwrddy550QQDGI2
LT+0ta1lbDRxiMZXkTg7HB2Q3iYjZHdweLLJdGSpalYyXN95A5H2RsyCALA6Y0oS
+lrYEoNyGqSNhgqVe/kRgvz4t9CsJ3fam/Y7JVmL/s43WvkdODpaEcEDiZRosQuo
NbC+kD3t5qvElkPZUS4yqMXmjVCJpzW8ijLh3H1CSBwLjB4b2tLAEi83xeNQPRo=
=6Q7H
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-09-26' into staging
nbd patches for 2018-09-26
Fixes for external clients; add reminder to revisit naming of x- command
- Vladimir Sementsov-Ogievskiy: nbd/server: send more than one extent of base:allocation context
- John Snow: qapi: bitmap-merge: document name change
- Vladimir Sementsov-Ogievskiy: nbd/server: fix bitmap export
# gpg: Signature made Thu 27 Sep 2018 03:40:03 BST
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2018-09-26:
nbd/server: send more than one extent of base:allocation context
qapi: bitmap-merge: document name change
nbd/server: fix bitmap export
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We named these using underscores instead of the preferred dash,
document this nearby so we cannot possibly forget to rectify this
when we remove the 'x-' prefixes when the feature becomes stable.
We do not implement the change ahead of time to avoid more work
for libvirt to do in order to figure out how to use the beta version
of the API needlessly.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20180919190934.16284-1-jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: typo fix]
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, it includes:
pages: amount of pages compressed and transferred to the target VM
busy: amount of count that no free thread to compress data
busy-rate: rate of thread busy
compressed-size: amount of bytes after compression
compression-rate: rate of compressed size
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20180906070101.27280-3-xiaoguangrong@tencent.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
- Drain fixes
- node-name parameters for block-commit
- Refactor block jobs to use transactional callbacks for exiting
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbqlBsAAoJEPQH2wBh1c9ABCQIAJ4adAAlr65kmcktHrOeQc6A
7VwSSCUa9B8BJS+/H3V8XF3eX1fa016cRQCHfH/ua3Wqavw00qcuS8Bz/ggc6qls
S1kNSSGhemvtf6ebTCN++HCxEg8g1RjsdnxaTiNWrYLKadX5kjLGofU1eAM2J/re
k5YsyB01X4RHS2L0eAUbYGgNFs+UJEU4p0aKGBPHsOj1LIYEzFhDTVNJ8OjNUG9R
mcMXFiYmQpJTV0hlIqL+pOtRvlR9YOKgkO8dmFkRe+z82f+GA+EZhLfpACxc7ilQ
HS4V2NMVucZ7G8gGudg9mqvd3u/AV5BiUtIGd0iIQ9pU9fUuPVPl977i5WHewoM=
=3TQt
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/xanclic/tags/pull-block-2018-09-25' into staging
Block layer patches:
- Drain fixes
- node-name parameters for block-commit
- Refactor block jobs to use transactional callbacks for exiting
# gpg: Signature made Tue 25 Sep 2018 16:12:44 BST
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/xanclic/tags/pull-block-2018-09-25: (42 commits)
test-bdrv-drain: Test draining job source child and parent
block: Use a single global AioWait
test-bdrv-drain: Fix outdated comments
test-bdrv-drain: AIO_WAIT_WHILE() in job .commit/.abort
job: Avoid deadlocks in job_completed_txn_abort()
test-bdrv-drain: Test nested poll in bdrv_drain_poll_top_level()
block: Remove aio_poll() in bdrv_drain_poll variants
blockjob: Lie better in child_job_drained_poll()
block-backend: Decrease in_flight only after callback
block-backend: Fix potential double blk_delete()
block-backend: Add .drained_poll callback
block: Add missing locking in bdrv_co_drain_bh_cb()
test-bdrv-drain: Test AIO_WAIT_WHILE() in completion callback
job: Use AIO_WAIT_WHILE() in job_finish_sync()
test-blockjob: Acquire AioContext around job_cancel_sync()
test-bdrv-drain: Drain with block jobs in an I/O thread
aio-wait: Increase num_waiters even in home thread
blockjob: Wake up BDS when job becomes idle
job: Fix missing locking due to mismerge
job: Fix nested aio_poll() hanging in job_txn_apply
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The block-commit QMP command required specifying the top and base nodes
of the commit jobs using the file name of that node. While this works
in simple cases (local files with absolute paths), the file names
generated for more complicated setups can be hard to predict.
The block-commit command has more problems than just this, so we want to
replace it altogether in the long run, but libvirt needs a reliable way
to address nodes now. So we don't want to wait for a new, cleaner
command, but just add the minimal thing needed right now.
This adds two new options top-node and base-node to the command, which
allow specifying node names instead. They are mutually exclusive with
the old options.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a long story. Red Hat has relicensed Windows KVM device drivers
in 2018 and there was an agreement that to avoid WHQL driver conflict
software manufacturers should set proper PCI subsystem vendor ID in
their distributions. Thus PCI subsystem vendor id becomes actively used.
The problem is that this field is applied by us via hardware compats.
Thus technically it could be lost.
This patch adds PCI susbsystem id and vendor id to exportable parameters
for validation.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180918095852.28422-1-den@openvz.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fix documentation to match the other jobs amended for 3.1.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180906130225.5118-16-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180906130225.5118-15-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180906130225.5118-14-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180906130225.5118-13-jsnow@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We recently removed the long deprecated "ppcemb" target. This adds a
comment in common.json about the SysEmuTarget type, recording when it was
removed.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Here's another pull request for qemu-3.1. No real theme here, just an
assortment of various fixes. Probably the most notable thing is the
removal of the ppcemb target which has been deprecated for some time
now.
-----BEGIN PGP SIGNATURE-----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=WnE4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180907' into staging
ppc patch queue 2018-09-07
Here's another pull request for qemu-3.1. No real theme here, just an
assortment of various fixes. Probably the most notable thing is the
removal of the ppcemb target which has been deprecated for some time
now.
# gpg: Signature made Fri 07 Sep 2018 08:30:02 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.1-20180907:
target-ppc: Extend HWCAP2 bits for ISA 3.0
target/ppc/kvm: set vcpu as online/offline
Fix a deadlock case in the CPU hotplug flow
spapr: Correct reference count on spapr-cpu-core
mac_newworld: implement custom FWPathProvider
uninorth: add ofw-addr property to allow correct fw path generation
mac_oldworld: implement custom FWPathProvider
grackle: set device fw_name and address for correct fw path generation
macio: add addr property to macio IDE object
macio: add macio bus to help with fw path generation
macio: move MACIOIDEState type declarations to macio.h
spapr_pci: fix potential NULL pointer dereference
spapr: fix leak of rev array
ppc: Remove deprecated ppcemb target
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no known available OS for ppc around anymore that uses page
sizes below 4k, so it does not make much sense that we keep wasting
our time on building and testing the ppcemb-softmmu target. It has
been deprecated since two releases, and nobody complained, so let's
remove this now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The last case where qobject_from_json() & friends return null without
setting an error is empty or blank input. Callers:
* block.c's parse_json_protocol() reports "Could not parse the JSON
options". It's marked as a work-around, because it also covered
actual bugs, but they got fixed in the previous few commits.
* qobject_input_visitor_new_str() reports "JSON parse error". Also
marked as work-around. The recent fixes have made this unreachable,
because it currently gets called only for input starting with '{'.
* check-qjson.c's empty_input() and blank_input() demonstrate the
behavior.
* The other callers are not affected since they only pass input with
exactly one JSON value or, in the case of negative tests, one error.
Fail with "Expecting a JSON value" instead of returning null, and
simplify callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-48-armbru@redhat.com>
The classical way to structure parser and lexer is to have the client
call the parser to get an abstract syntax tree, the parser call the
lexer to get the next token, and the lexer call some function to get
input characters.
Another way to structure them would be to have the client feed
characters to the lexer, the lexer feed tokens to the parser, and the
parser feed abstract syntax trees to some callback provided by the
client. This way is more easily integrated into an event loop that
dispatches input characters as they arrive.
Our JSON parser is kind of between the two. The lexer feeds tokens to
a "streamer" instead of a real parser. The streamer accumulates
tokens until it got the sequence of tokens that comprise a single JSON
value (it counts curly braces and square brackets to decide). It
feeds those token sequences to a callback provided by the client. The
callback passes each token sequence to the parser, and gets back an
abstract syntax tree.
I figure it was done that way to make a straightforward recursive
descent parser possible. "Get next token" becomes "pop the first
token off the token sequence". Drawback: we need to store a complete
token sequence. Each token eats 13 + input characters + malloc
overhead bytes.
Observations:
1. This is not the only way to use recursive descent. If we replaced
"get next token" by a coroutine yield, we could do without a
streamer.
2. The lexer reports errors by passing a JSON_ERROR token to the
streamer. This communicates the offending input characters and
their location, but no more.
3. The streamer reports errors by passing a null token sequence to the
callback. The (already poor) lexical error information is thrown
away.
4. Having the callback receive a token sequence duplicates the code to
convert token sequence to abstract syntax tree in every callback.
5. Known bug: the streamer silently drops incomplete token sequences.
This commit rectifies 4. by lifting the call of the parser from the
callbacks into the streamer. Later commits will address 3. and 5.
The lifting removes a bug from qjson.c's parse_json(): it passed a
pointer to a non-null Error * in certain cases, as demonstrated by
check-qjson.c.
json_parser_parse() is now unused. It's a stupid wrapper around
json_parser_parse_err(). Drop it, and rename json_parser_parse_err()
to json_parser_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-35-armbru@redhat.com>
Instead of putting the main thread to sleep state to wait for
free compression thread, we can directly post it out as normal
page that reduces the latency and uses CPUs more efficiently
A parameter, compress-wait-thread, is introduced, it can be
enabled if the user really wants the old behavior
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Currently, the default maximum CPU throttle for migration is
99(CPU_THROTTLE_PCT_MAX). This is too big and can make a remarkable
performance effect for the guest. We see a lot of packets latency
exceed 500ms when the CPU_THROTTLE_PCT_MAX reached. This patch set
adds a new max-cpu-throttle parameter to limit the CPU throttle.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In the return for command "query-migrate", time information like
"total-time", "setup-time", "downtime", is not included in ram
json-object.
So fix the description in migration.json by unpacking those information
from ram json-object.
Signed-off-by: jialina01 <jialina01@baidu.com>
Signed-off-by: chaiwen <chaiwen@baidu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Most of the various error classes were removed prior to the 1.2 release.
Remove mentions of the error classes which did not make it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev-add fails if an invalid node name is given, so we should
document what a valid node name even is.
Reported-by: Cong Li <coli@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cong Li <coli@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Like for query-block, the client needs to identify which BlockBackend
the returned data is for. Anonymous BlockBackends are identified by the
device model they are attached to. Add a 'qdev' field that contains the
qdev ID or QOM path of the attached device model.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Making 'allow-oob' optional in SchemaInfoCommand permits omitting it
in the common case. Shrinks query-qmp-schema's output from 122.1KiB
to 118.6KiB for me.
Note that out-of-band execution is still experimental (you have to
configure the monitor with x-oob=on to use it).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180718090557.17248-1-armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Committing to the current --preconfig / exit-preconfig interface
before it has seen any use is premature. Mark both as experimental,
the former in documentation, the latter by renaming it to
x-exit-preconfig.
See the previous commit for more detailed rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180705091402.26244-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
[Straightforward conflict with commit 514337c142 resolved]
According to commit 047f7038f5, option --preconfig
[...] allows pausing QEMU in the new RUN_STATE_PRECONFIG state,
allowing the configuration of QEMU from QMP before the machine
jumps into board initialization code of machine_run_board_init()
The intent is to allow management to query machine state and
additionally configure it using previous query results within one
QEMU instance (i.e. eliminate the need to start QEMU twice, 1st to
query board specific parameters and 2nd for actual VM start using
query results for additional parameters).
The implementation is a bit of a hack: it splices in an additional
main loop before machine creation, in special runstate preconfig. New
command exit-preconfig exits that main loop. QEMU continues
initializing, creates the machine, and runs the good old main loop.
The replacement of the main loop is transparent to monitors.
Sadly, some commands expect initialization to be complete. Running
them in --preconfig's main loop violates their preconditions. Since
we don't really know which commands are safe, we use a whitelist.
This drags the concept of run state into the QMP core.
The whitelist is done as a command flag in the QAPI schema (commit
d6fe3d02e9). Drags the concept of run state further into the QAPI
language.
The command flag is exposed in query-qmp-schema (also commit
d6fe3d02e9). This makes it ABI.
I consider the whole thing an offensively ugly hack, but sometimes an
ugly hack is the best we can do to solve a problem people have.
The need described by the commit message quote above is genuine. The
proper solution would be a main loop that permits complete
configuration via QMP. This is out of reach, thus the hack.
However, even though the need is genuine, it isn't urgent: libvirt is
not going to use this anytime soon. Baking a hack into ABI before it
has any users is a bad idea.
This commit reverts the parts of commit d6fe3d02e9 that affect ABI
via query-qmp-schema. The commit did the following:
(1) Add command flag 'allow-preconfig' to the QAPI schema language
(2) Pass it to code generators
(3) Have the commands.py code generator pass it to the command
registry (so commit 047f7038f5 can use it as whitelist)
(4) Add 'allow-preconfig' to SchemaInfoCommand (neglecting to update
qapi-code-gen.txt section "Client JSON Protocol introspection")
(5) Set 'allow-preconfig': true for commands qmp_capabilities,
query-commands, query-command-line-options, query-status
Revert exactly (4), plus a bit of documentation added to
qemu-tech.info in commit 047f7038f5.
Shrinks query-qmp-schema's output from 126.5KiB to 121.8KiB for me.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180705091402.26244-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
[Straightforward conflict with commit d626b6c1ae resolved]
This was accidentally omitted. Thanks to Eric Blake for spotting this.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
