Reviewed-by: Richard Henderson <richard.henderson@liaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Added function that loads RSS eBPF program.
Added stub functions for RSS eBPF loader.
Added meson and configuration options.
By default, eBPF feature enabled if libbpf is present in the build system.
libbpf checked in configuration shell script and meson script.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Users might want to enable all features, without realizing some
features have negative effect. Mention the TCI feature is slow
and experimental, hoping it will be selected knowingly.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210125144530.2837481-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make CONFIG_TCG_INTERPRETER a Meson option, and enable TCI (though with
a warning) if the host CPU is unsupported, making it more similar to
other --enable-* options.
Remove TCG-specific include paths from !CONFIG_TCG builds.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This also allows removing CONFIG_NEED_X11, all the ingredients
can be computed easily in meson.build.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a flag to enable/disable control flow integrity checks
on indirect function calls.
This feature only allows indirect function calls at runtime to functions
with compatible signatures.
This feature is only provided by LLVM/Clang, and depends on link-time
optimization which is currently supported only with LLVM/Clang >= 6.0
We also add an option to enable a debugging version of cfi, with verbose
output in case of a CFI violation.
CFI on indirect function calls does not support calls to functions in
shared libraries (since they were not known at compile time), and such
calls are forbidden. QEMU relies on dlopen/dlsym when using modules,
so we make modules incompatible with CFI.
All the checks are performed in meson.build. configure is only used to
forward the flags to meson
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201204230615.2392-5-dbuono@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will allow meson to honour -Dauto_features=disabled later.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201210190417.31673-4-alex.bennee@linaro.org>
This is a relatively new feature in libfuse (available since 3.8.0,
which was released in November 2019), so we have to add a dedicated
check whether it is available before making use of it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-7-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The --enable/disable-vhost-user-blk-server options were implemented in
./configure. There has been confusion about them and part of the problem
is that the shell syntax used for setting the default value is not easy
to read. Move the option over to meson where the conditions are easier
to understand:
have_vhost_user_blk_server = (targetos == 'linux')
if get_option('vhost_user_blk_server').enabled()
if targetos != 'linux'
error('vhost_user_blk_server requires linux')
endif
elif get_option('vhost_user_blk_server').disabled() or not have_system
have_vhost_user_blk_server = false
endif
This patch does not change behavior.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201110171121.1265142-2-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Currently it is unknown whether virtiofsd will be built at
configuration time. It will be automatically built when dependency
is met. Also, required libraries are not clear.
To make this clear, add configure option --{enable,disable}-virtiofsd.
The default is the same as current (enabled if available) like many
other options. When --enable-virtiofsd is given and dependency is not
met, we get:
ERROR: Problem encountered: virtiofsd requires libcap-ng-devel and seccomp-devel
or
ERROR: Problem encountered: virtiofsd needs tools and vhost-user support
In addition, configuration summary now includes virtiofsd entry:
build virtiofs daemon: YES/NO
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Message-Id: <20201008103133.2722903-1-misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Manual merge
Since installation is not part of Makefiles anymore, Make need not
know the directories anymore. Meson already knows them through
built-in options, do everything using them instead of the config_host
dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20201015220626.418-4-luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initially, libudev detection was bundled with --enable-mpath because
qemu-pr-helper was the only user of libudev. Recently however the USB
U2F emulation has also started using libudev, so add a separate
option. This also allows 1) disabling libudev if desired for static
builds and 2) for non-static builds, requiring libudev even if
multipath support is undesirable.
The multipath test is adjusted, because it is now possible to enter it
with configurations that should fail, such as --static --enable-mpath
--disable-libudev.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Build the library via the main meson.build just like for capstone.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libfdt.a, which we wouldn't
do before-hand, and lets us remove the whole recursive make machinery.
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SLIRP uses Meson so it could become a subproject in the future,
but our choice of configure options is not yet supported in Meson
(https://github.com/mesonbuild/meson/pull/7740).
For now, build the library via the main meson.build just like for
capstone.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libslirp.a, which we wouldn't
do before-hand.
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass the path to the program to scripts/check_sparse.py, which
previously was not included in config-host.mak. Change
scripts/check_sparse.py to work with cgcc, which seems to
work better with sparse 0.6.x.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare for moving the tests to meson. For now they only have
enabled/disabled as the possible values when meson is invoked,
but "auto" will be a possibility later, when configure will only
parse the command line options.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are better ways to do this, e.g. meson cmake subproject,
but that requires cmake 3.7 and some of our CI environments
only provide cmake 3.5.
Nor can we add a meson.build file to capstone/, because the git
submodule would then always report "untracked files". Fixing that
would require creating our own branch on the qemu git mirror, at
which point we could just as easily create a native meson subproject.
Instead, build the library via the main meson.build.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libcapstone.a, which we wouldn't
do before-hand. In addition, the use of the configuration header file
instead of command-line -DEFINES means that we will rebuild the
capstone objects with changes to meson.build.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While detection of the framework was already there, moving
the option allows for better error reporting.
Reported-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Because LIBS is not used anymore, tcmalloc/jemalloc does
not work with binaries whose description is in Meson.
The fix is simply to move them to Meson too.
For consistency with other configure options, specifying
--enable-malloc-trim together with --enable-{tc,je}malloc
becomes a fatal error.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is the first compiler/linker test that has been moved to Meson.
Add more section headings to keep things clearer.
This also fixes static linking to libmpathpersist, which has a
dependency on libmultipath but no pkg-config file to describe it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be useful in the future to generate configure
command line parsing from meson_options.txt.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When cross-compiling, by default qemu_docdir is 'c:\Program Files\QEMU\'
which is not recognized as being an absolute path, and meson will end up
adding the prefix again.
Add an option to pass docdir location to meson, pre-prefixed like we do
with other directories, build qemu_docdir with the common suffix and use
that instead of config_host['qemu_docdir'].
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When cross-compiling, by default qemu_datadir is 'c:\Program
Files\QEMU', which is not recognized as being an absolute path, and
meson will end up adding the prefix again.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-6-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following patches will make use of it to fix installation paths.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200826110419.528931-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson warns if xgettext is not found. In the future we may want to add
a required argument to i18n.gettext(); in the meanwhile, I am adding a
--enable-gettext/--disable-gettext option and feature detection in
configure. This preserves QEMU's default behavior of detecting system
features, without any warning, if neither --enable-* nor --disable-*
is requested.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
