block/sheepdog.o has a 4M static variable that is 90% of QEMU's whole .bss
section. Replace it with a heap-allocated block, and make it smaller too
since only the inode header is actually being used.
bss size goes down from 4464280 to 269976.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180523160721.14018-3-pbonzini@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
The expression "SD_INODE_SIZE - sizeof(inode.data_vdi_id)" already has a macro
defined for the same value (though with a nicer definition using offsetof).
Replace it.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180523160721.14018-2-pbonzini@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
* Copy offloading for qemu-img convert (iSCSI, raw, and qcow2)
If the underlying storage supports copy offloading, qemu-img convert will
use it instead of performing reads and writes. This avoids data transfers
and thus frees up storage bandwidth for other purposes. SCSI EXTENDED COPY
and Linux copy_file_range(2) are used to implement this optimization.
* Drop spurious "WARNING: I\/O thread spun for 1000 iterations" warning
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbFSBoAAoJEJykq7OBq3PISpEIAIcMao4/rzinAWXzS+ncK9LO
6FtRVpgutpHaWX2ayySaz5n2CdR3cNMrpCI7sjY2Kw0lrdkqxPgl5n0SWD+VCl4W
7+JLz/uF0iUV8X+99e7WGAjZbm9LSlxgn5AQKfrrwyPf0ZfzoYQ5nBMcQ6xjEeQP
48j2WqJqN9/u8RBD07o11yn0+CE5g56/f12xVjR5ASVodzsAmcZ2OQRMQbM01isU
1mBekJQkDxJkt5l13Rql8+t+vWz8/9BEW2c/eIDKvoayMqYJpdfKv4DqLloIuHnc
3RkquA0zUuKtl7xEnEkH/We7fi4QPGW/vyBN7ychS/zKzZFQrXmwqrAuFSw3dKU=
=vZp+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
* Copy offloading for qemu-img convert (iSCSI, raw, and qcow2)
If the underlying storage supports copy offloading, qemu-img convert will
use it instead of performing reads and writes. This avoids data transfers
and thus frees up storage bandwidth for other purposes. SCSI EXTENDED COPY
and Linux copy_file_range(2) are used to implement this optimization.
* Drop spurious "WARNING: I\/O thread spun for 1000 iterations" warning
# gpg: Signature made Mon 04 Jun 2018 12:20:08 BST
# gpg: using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
main-loop: drop spin_counter
qemu-img: Convert with copy offloading
block-backend: Add blk_co_copy_range
iscsi: Implement copy offloading
iscsi: Create and use iscsi_co_wait_for_task
iscsi: Query and save device designator when opening
file-posix: Implement bdrv_co_copy_range
qcow2: Implement copy offloading
raw: Implement copy offloading
raw: Check byte range uniformly
block: Introduce API for copy offloading
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbEXNvAAoJECgfDbjSjVRpc8gH/R8xrcFrV+k9wwbgYcOcGb6Y
LWjseE31pqJcxRV80vLOdzYEuLStZQKQQY7xBDMlA5vdyvZxIA6FLO2IsiJSbFAk
EK8pclwhpwQAahr8BfzenabohBv2UO7zu5+dqSvuJCiMWF3jGtPAIMxInfjXaOZY
odc1zY2D2EgsC7wZZ1hfraRbISBOiRaez9BoGDKPOyBY9G1ASEgxJgleFgoBLfsK
a1XU+fDM6hAVdxftfkTm0nibyf7PWPDyzqghLqjR9WXLvZP3Cqud4p8N29mY51pR
KSTjA4FYk6Z9EVMltyBHfdJs6RQzglKjxcNGdlrvacDfyFi79fGdiosVllrjfJM=
=3+V0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi, vhost, misc: fixes, features
vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 01 Jun 2018 17:25:19 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (31 commits)
vhost-blk: turn on pre-defined RO feature bit
ACPI testing: test NFIT platform capabilities
nvdimm, acpi: support NFIT platform capabilities
tests/.gitignore: add entry for generated file
arch_init: sort architectures
ui: use local path for local headers
qga: use local path for local headers
colo: use local path for local headers
migration: use local path for local headers
usb: use local path for local headers
sd: fix up include
vhost-scsi: drop an unused include
ppc: use local path for local headers
rocker: drop an unused include
e1000e: use local path for local headers
ioapic: fix up includes
ide: use local path for local headers
display: use local path for local headers
trace: use local path for local headers
migration: drop an unused include
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Just set the full_update flag if we need a new DisplaySurface. Create
a new surface when the flag is set instead of having two places where
qemu_create_displaysurface_from() is called.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180525131318.28437-1-kraxel@redhat.com
If the user doesn't specify a TARGET_LIST they get the current
configuration but with spaces and hilarity ensues. This adds some make
magic to turn the TARGET_LIST back into a comma separated list.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20180521103504.26432-1-alex.bennee@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
When cancel migration during RDMA precopy, the source qemu main thread hangs sometime.
The backtrace is:
(gdb) bt
#0 0x00007f249eabd43d in write () from /lib64/libpthread.so.0
#1 0x00007f24a1ce98e4 in rdma_get_cm_event (channel=0x4675d10, event=0x7ffe2f643dd0) at src/cma.c:2189
#2 0x00000000007b6166 in qemu_rdma_cleanup (rdma=0x6784000) at migration/rdma.c:2296
#3 0x00000000007b7cae in qio_channel_rdma_close (ioc=0x3bfcc30, errp=0x0) at migration/rdma.c:2999
#4 0x00000000008db60e in qio_channel_close (ioc=0x3bfcc30, errp=0x0) at io/channel.c:273
#5 0x00000000007a8765 in channel_close (opaque=0x3bfcc30) at migration/qemu-file-channel.c:98
#6 0x00000000007a71f9 in qemu_fclose (f=0x527c000) at migration/qemu-file.c:334
#7 0x0000000000795b96 in migrate_fd_cleanup (opaque=0x3b46280) at migration/migration.c:1162
#8 0x000000000093a71b in aio_bh_call (bh=0x3db7a20) at util/async.c:90
#9 0x000000000093a7b2 in aio_bh_poll (ctx=0x3b121c0) at util/async.c:118
#10 0x000000000093f2ad in aio_dispatch (ctx=0x3b121c0) at util/aio-posix.c:436
#11 0x000000000093ab41 in aio_ctx_dispatch (source=0x3b121c0, callback=0x0, user_data=0x0)
at util/async.c:261
#12 0x00007f249f73c7aa in g_main_context_dispatch () from /lib64/libglib-2.0.so.0
#13 0x000000000093dc5e in glib_pollfds_poll () at util/main-loop.c:215
#14 0x000000000093dd4e in os_host_main_loop_wait (timeout=28000000) at util/main-loop.c:263
#15 0x000000000093de05 in main_loop_wait (nonblocking=0) at util/main-loop.c:522
#16 0x00000000005bc6a5 in main_loop () at vl.c:1944
#17 0x00000000005c39b5 in main (argc=56, argv=0x7ffe2f6443f8, envp=0x3ad0030) at vl.c:4752
It does not get the RDMA_CM_EVENT_DISCONNECTED event after rdma_disconnect sometime.
According to IB Spec once active side send DREQ message, it should wait for DREP message
and only once it arrived it should trigger a DISCONNECT event. DREP message can be dropped
due to network issues.
For that case the spec defines a DREP_timeout state in the CM state machine, if the DREP is
dropped we should get a timeout and a TIMEWAIT_EXIT event will be trigger.
Unfortunately the current kernel CM implementation doesn't include the DREP_timeout state
and in above scenario we will not get DISCONNECT or TIMEWAIT_EXIT events.
So it should not invoke rdma_get_cm_event which may hang forever, and the event channel
is also destroyed in qemu_rdma_cleanup.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Because qio_channel_rdma_writev and qio_channel_rdma_readv maybe invoked
by different threads concurrently, this patch removes unnecessary variables
len in QIOChannelRDMA and use local variable instead.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Lidong Chen <jemmy858585@gmail.com>
Activating the block devices causes the locks to be taken on
the backing file. If we're running with -S and the destination libvirt
hasn't started the destination with 'cont', it's expecting the locks are
still untaken.
Don't activate the block devices if we're not going to autostart the VM;
'cont' already will do that anyway. This change is tied to the new
migration capability 'late-block-activate' that defaults to off, keeping
the old behaviour by default.
bz: https://bugzilla.redhat.com/show_bug.cgi?id=1560854
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
On the POWER9 processor, the XIVE interrupt controller can control
interrupt sources using MMIO to trigger events, to EOI or to turn off
the sources. Priority management and interrupt acknowledgment is also
controlled by MMIO in the presenter sub-engine.
These MMIO regions are exposed to guests in QEMU with a set of 'ram
device' memory mappings, similarly to VFIO, and the VMAs are populated
dynamically with the appropriate pages using a fault handler.
But, these regions are an issue for migration. We need to discard the
associated RAMBlocks from the RAM state on the source VM and let the
destination VM rebuild the memory mappings on the new host in the
post_load() operation just before resuming the system.
To achieve this goal, the following introduces a new RAMBlock flag
RAM_MIGRATABLE which is updated in the vmstate_register_ram() and
vmstate_unregister_ram() routines. This flag is then used by the
migration to identify RAMBlocks to discard on the source. Some checks
are also performed on the destination to make sure nothing invalid was
sent.
This change impacts the boston, malta and jazz mips boards for which
migration compatibility is broken.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
QEMU 3.0 enables strict check for compression & decompression to
make the migration more robust, that depends on the source to fix
the internal design which triggers the unexpected error conditions
To make it work for migrating old version QEMU to 2.13 QEMU, we
introduce this parameter to disable the error check on the
destination which is the default behavior of the machine type
which is older than 2.13, alternately, the strict check can be
enabled explicitly as followings:
-M pc-q35-2.11 -global migration.decompress-error-check=true
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Remove a "#if defined(XX) || defined(YY) || ..." with all available
targets
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180529194207.31503-16-laurent@vivier.eu>
add a per target target_fcntl.h and include the generic one from them
No code change.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180529194207.31503-2-laurent@vivier.eu>
we have the same problem decribed in 7d6b1daedd
("linux-user, ppc: mftbl can be used by user application")
for ppc in the case of sparc.
When we use an application trying to resolve a name, it hangs in
0x00000000ff5dd40c: rd %tick, %o5
0x00000000ff5dd410: srlx %o5, 0x20, %o4
0x00000000ff5dd414: btst %o5, %g4
0x00000000ff5dd418: be %icc, 0xff5dd40c
because %tick is staying at 0.
As QEMU_CLOCK_VIRTUAL is not available in linux-user mode,
simply use cpu_get_host_ticks() instead.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180528194812.31216-1-laurent@vivier.eu>
linux-user/syscall.c:9860:17: warning: Call to function 'strcpy' is insecure as it does not provide bounding of the memory buffer. Replace unbounded copy functions with analogous functions that support length arguments such as 'strlcpy'. CWE-119
strcpy (buf->machine, cpu_to_uname_machine(cpu_env));
^~~~~~
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170724182751.18261-32-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Do the cast to uintptr_t within the helper, so that the compiler
can type check the pointer argument. We can also do some more
sanity checking of the index argument.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Read only feature shouldn't be negotiable, because if the
backend device reported Read only feature supported, QEMU
host driver shouldn't change backend's RO attribute. While
here, also enable the vhost-user-blk test utility to test
RO feature.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add testing for the newly added NFIT Platform Capabilities Structure.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a machine command line option to allow the user to control the Platform
Capabilities Structure in the virtualized NFIT. This Platform Capabilities
Structure was added in ACPI 6.2 Errata A.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After a "make check" we end up with the following:
$ git status
On branch master
Your branch is up-to-date with 'origin/master'.
Untracked files:
(use "git add <file>..." to include in what will be committed)
tests/test-block-backend
nothing added to commit but untracked files present (use "git add" to track)
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Fixes: commit ad0df3e0fd ("block: test blk_aio_flush() with blk->root == NULL")
Cc: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Sort alphabetically. Will help us see if anything is missing (e.g. tile
is not there now).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Reviewed-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
include files shouldn't have the "include/" part, that is implied.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
