We don't need to set the rp_state.error right after a shutdown because
qemu_file_shutdown() always sets the QEMUFile error, so the return
path thread would have seen it and set the rp error itself.
Setting the error outside of the thread is also racy because the
thread could clear it after we set it.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230918172822.19052-3-farosas@suse.de>
We hit intermit CI issue on failing at migration-test over the unit test
preempt/plain:
qemu-system-x86_64: Unable to read from socket: Connection reset by peer
Memory content inconsistency at 5b43000 first_byte = bd last_byte = bc current = 4f hit_edge = 1
**
ERROR:../tests/qtest/migration-test.c:300:check_guests_ram: assertion failed: (bad == 0)
(test program exited with status code -6)
Fabiano debugged into it and found that the preempt thread can quit even
without receiving all the pages, which can cause guest not receiving all
the pages and corrupt the guest memory.
To make sure preempt thread finished receiving all the pages, we can rely
on the page_requested_count being zero because preempt channel will only
receive requested page faults. Note, not all the faulted pages are required
to be sent via the preempt channel/thread; imagine the case when a
requested page is just queued into the background main channel for
migration, the src qemu will just still send it via the background channel.
Here instead of spinning over reading the count, we add a condvar so the
main thread can wait on it if that unusual case happened, without burning
the cpu for no good reason, even if the duration is short; so even if we
spin in this rare case is probably fine. It's just better to not do so.
The condvar is only used when that special case is triggered. Some memory
ordering trick is needed to guarantee it from happening (against the
preempt thread status field), so the main thread will always get a kick
when that triggers correctly.
Closes: https://gitlab.com/qemu-project/qemu/-/issues/1886
Debugged-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230918172822.19052-2-farosas@suse.de>
Add a new .save_prepare() handler to struct SaveVMHandlers. This handler
is called early, even before migration starts, and can be used by
devices to perform early checks.
Refactor migrate_init() to be able to return errors and call
.save_prepare() from there.
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Initialization of mig_stats, compression_counters and VFIO bytes
transferred is hard-coded in migration code path and snapshot code path.
Make the code cleaner by initializing them in migrate_init().
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The functions in target.c are not static, yet they don't have a proper
migration prefix. Add such prefix.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The ongoing QEMU multi-queue block layer effort makes it possible for multiple
threads to process I/O in parallel. The nbd block driver is not compatible with
the multi-queue block layer yet because QIOChannel cannot be used easily from
coroutines running in multiple threads. This series changes the QIOChannel API
to make that possible.
In the current API, calling qio_channel_attach_aio_context() sets the
AioContext where qio_channel_yield() installs an fd handler prior to yielding:
qio_channel_attach_aio_context(ioc, my_ctx);
...
qio_channel_yield(ioc); // my_ctx is used here
...
qio_channel_detach_aio_context(ioc);
This API design has limitations: reading and writing must be done in the same
AioContext and moving between AioContexts involves a cumbersome sequence of API
calls that is not suitable for doing on a per-request basis.
There is no fundamental reason why a QIOChannel needs to run within the
same AioContext every time qio_channel_yield() is called. QIOChannel
only uses the AioContext while inside qio_channel_yield(). The rest of
the time, QIOChannel is independent of any AioContext.
In the new API, qio_channel_yield() queries the AioContext from the current
coroutine using qemu_coroutine_get_aio_context(). There is no need to
explicitly attach/detach AioContexts anymore and
qio_channel_attach_aio_context() and qio_channel_detach_aio_context() are gone.
One coroutine can read from the QIOChannel while another coroutine writes from
a different AioContext.
This API change allows the nbd block driver to use QIOChannel from any thread.
It's important to keep in mind that the block driver already synchronizes
QIOChannel access and ensures that two coroutines never read simultaneously or
write simultaneously.
This patch updates all users of qio_channel_attach_aio_context() to the
new API. Most conversions are simple, but vhost-user-server requires a
new qemu_coroutine_yield() call to quiesce the vu_client_trip()
coroutine when not attached to any AioContext.
While the API is has become simpler, there is one wart: QIOChannel has a
special case for the iohandler AioContext (used for handlers that must not run
in nested event loops). I didn't find an elegant way preserve that behavior, so
I added a new API called qio_channel_set_follow_coroutine_ctx(ioc, true|false)
for opting in to the new AioContext model. By default QIOChannel uses the
iohandler AioHandler. Code that formerly called
qio_channel_attach_aio_context() now calls
qio_channel_set_follow_coroutine_ctx(ioc, true) once after the QIOChannel is
created.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230830224802.493686-5-stefanha@redhat.com>
[eblake: also fix migration/rdma.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
We can fail the blk_insert_bs() at init_blk_migration(), leaving the
BlkMigDevState without a dirty_bitmap and BlockDriverState. Account
for the possibly missing elements when doing cleanup.
Fix the following crashes:
Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
0x0000555555ec83ef in bdrv_release_dirty_bitmap (bitmap=0x0) at ../block/dirty-bitmap.c:359
359 BlockDriverState *bs = bitmap->bs;
#0 0x0000555555ec83ef in bdrv_release_dirty_bitmap (bitmap=0x0) at ../block/dirty-bitmap.c:359
#1 0x0000555555bba331 in unset_dirty_tracking () at ../migration/block.c:371
#2 0x0000555555bbad98 in block_migration_cleanup_bmds () at ../migration/block.c:681
Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
0x0000555555e971ff in bdrv_op_unblock (bs=0x0, op=BLOCK_OP_TYPE_BACKUP_SOURCE, reason=0x0) at ../block.c:7073
7073 QLIST_FOREACH_SAFE(blocker, &bs->op_blockers[op], list, next) {
#0 0x0000555555e971ff in bdrv_op_unblock (bs=0x0, op=BLOCK_OP_TYPE_BACKUP_SOURCE, reason=0x0) at ../block.c:7073
#1 0x0000555555e9734a in bdrv_op_unblock_all (bs=0x0, reason=0x0) at ../block.c:7095
#2 0x0000555555bbae13 in block_migration_cleanup_bmds () at ../migration/block.c:690
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20230731203338.27581-1-farosas@suse.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is how everything else in QEMUFile is structured.
As a bonus they are three less lines of code.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230530183941.7223-17-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It was not used outside of qemu_file.c anyways.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230530183941.7223-21-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It is not used outside of qemu_file, and it shouldn't.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230530183941.7223-19-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We do a qemu_fclose() just after that, that also does a qemu_fflush(),
so remove one qemu_fflush().
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230530183941.7223-3-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Fast don't say much. Noflush indicates more clearly that it is like
qemu_file_transferred but without the flush.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230530183941.7223-2-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
qemu_start_incoming_migration needs to check the number of multifd
channels or postcopy ram channels to configure the backlog parameter (i.e.
the maximum length to which the queue of pending connections for sockfd
may grow) of listen(). So enforce the usage of postcopy-preempt and
multifd as below:
- need to use "-incoming defer" on the destination; and
- set_capability and set_parameter need to be done before migrate_incoming
Otherwise, disable the use of the features and report error messages to
remind users to adjust the commands.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230606101910.20456-2-wei.w.wang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
There are places in migration.c where the migration is marked failed with
MIGRATION_STATUS_FAILED, but the failure reason is never updated. Hence
libvirt doesn't know why the migration failed when it queries for it.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Tejus GK <tejus.gk@nutanix.com>
Message-ID: <20230621130940.178659-2-tejus.gk@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Extend query-migrate to provide throttle time and estimated
ring full time with dirty-limit capability enabled, through which
we can observe if dirty limit take effect during live migration.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <168733225273.5845.15871826788879741674-8@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Implement dirty-limit convergence algo for live migration,
which is kind of like auto-converge algo but using dirty-limit
instead of cpu throttle to make migration convergent.
Enable dirty page limit if dirty_rate_high_cnt greater than 2
when dirty-limit capability enabled, Disable dirty-limit if
migration be canceled.
Note that "set_vcpu_dirty_limit", "cancel_vcpu_dirty_limit"
commands are not allowed during dirty-limit live migration.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <168733225273.5845.15871826788879741674-7@git.sr.ht>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This commit is prepared for the implementation of dirty-limit
convergence algo.
The detection logic of throttling condition can apply to both
auto-converge and dirty-limit algo, putting it's position
before the checking logic for auto-converge feature.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <168733225273.5845.15871826788879741674-6@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Check if block migration is running before throttling
guest down in auto-converge way.
Note that this modification is kind of like code clean,
because block migration does not depend on auto-converge
capability, so the order of checks can be adjusted.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <168618975839.6361.17407633874747688653-5@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introduce migration dirty-limit capability, which can
be turned on before live migration and limit dirty
page rate durty live migration.
Introduce migrate_dirty_limit function to help check
if dirty-limit capability enabled during live migration.
Meanwhile, refactor vcpu_dirty_rate_stat_collect
so that period can be configured instead of hardcoded.
dirty-limit capability is kind of like auto-converge
but using dirty limit instead of traditional cpu-throttle
to throttle guest down. To enable this feature, turn on
the dirty-limit capability before live migration using
migrate-set-capabilities, and set the parameters
"x-vcpu-dirty-limit-period", "vcpu-dirty-limit" suitably
to speed up convergence.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <168618975839.6361.17407633874747688653-4@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introduce "vcpu-dirty-limit" migration parameter used
to limit dirty page rate during live migration.
"vcpu-dirty-limit" and "x-vcpu-dirty-limit-period" are
two dirty-limit-related migration parameters, which can
be set before and during live migration by qmp
migrate-set-parameters.
This two parameters are used to help implement the dirty
page rate limit algo of migration.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <168618975839.6361.17407633874747688653-3@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introduce "x-vcpu-dirty-limit-period" migration experimental
parameter, which is in the range of 1 to 1000ms and used to
make dirtyrate calculation period configurable.
Currently with the "x-vcpu-dirty-limit-period" varies, the
total time of live migration changes, test results show the
optimal value of "x-vcpu-dirty-limit-period" ranges from
500ms to 1000 ms. "x-vcpu-dirty-limit-period" should be made
stable once it proves best value can not be determined with
developer's experiments.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <168618975839.6361.17407633874747688653-2@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This doubly linked list is common for all the multifd and migration
threads so we need to avoid concurrent access.
Add a mutex to protect the data from concurrent access. This fixes a
crash when removing two MigrationThread objects from the list at the
same time during cleanup of multifd threads.
Fixes: 671326201d ("migration: Introduce interface query-migrationthreads")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230607161306.31425-3-farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We're about to add more functions to this file so make it use the same
coding style as the rest of the code.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230607161306.31425-2-farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
virtio-mem wants to know whether it should not mess with the RAMBlock
content (e.g., discard RAM, preallocate memory) on incoming migration.
So let's expose that function as migrate_ram_is_ignored() in
migration/misc.h
Message-ID: <20230706075612.67404-4-david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
The only migrate_fd_error() call sites are in "migration/migration.c",
which is also where we define migrate_fd_error(). Make the function
static, and remove its declaration from "migration/migration.h".
Cc: Juan Quintela <quintela@redhat.com> (maintainer:Migration)
Cc: Leonardo Bras <leobras@redhat.com> (reviewer:Migration)
Cc: Peter Xu <peterx@redhat.com> (reviewer:Migration)
Cc: qemu-trivial@nongnu.org
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2018404
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It cuts back on those awkward, duplicated !(has_resume && resume)
expressions.
Cc: Juan Quintela <quintela@redhat.com> (maintainer:Migration)
Cc: Leonardo Bras <leobras@redhat.com> (reviewer:Migration)
Cc: Peter Xu <peterx@redhat.com> (reviewer:Migration)
Cc: qemu-trivial@nongnu.org
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2018404
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, VFIO bytes_transferred is not reset properly:
1. bytes_transferred is not reset after a VM snapshot (so a migration
following a snapshot will report incorrect value).
2. bytes_transferred is a single counter for all VFIO devices, however
upon migration failure it is reset multiple times, by each VFIO
device.
Fix it by introducing a new function vfio_reset_bytes_transferred() and
calling it during migration and snapshot start.
Remove existing bytes_transferred reset in VFIO migration state
notifier, which is not needed anymore.
Fixes: 3710586caa ("qapi: Add VFIO devices migration stats in Migration stats")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Now that switchover ack logic has been implemented, enable the
capability.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Implement switchover ack logic. This prevents the source from stopping
the VM and completing the migration until an ACK is received from the
destination that it's OK to do so.
To achieve this, a new SaveVMHandlers handler switchover_ack_needed()
and a new return path message MIG_RP_MSG_SWITCHOVER_ACK are added.
The switchover_ack_needed() handler is called during migration setup in
the destination to check if switchover ack is used by the migrated
device.
When switchover is approved by all migrated devices in the destination
that support this capability, the MIG_RP_MSG_SWITCHOVER_ACK return path
message is sent to the source to notify it that it's OK to do
switchover.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Migration downtime estimation is calculated based on bandwidth and
remaining migration data. This assumes that loading of migration data in
the destination takes a negligible amount of time and that downtime
depends only on network speed.
While this may be true for RAM, it's not necessarily true for other
migrated devices. For example, loading the data of a VFIO device in the
destination might require from the device to allocate resources, prepare
internal data structures and so on. These operations can take a
significant amount of time which can increase migration downtime.
This patch adds a new capability "switchover ack" that prevents the
source from stopping the VM and completing the migration until an ACK
is received from the destination that it's OK to do so.
This can be used by migrated devices in various ways to reduce downtime.
For example, a device can send initial precopy metadata to pre-allocate
resources in the destination and use this capability to make sure that
the pre-allocation is completed before the source VM is stopped, so it
will have full effect.
This new capability relies on the return path capability to communicate
from the destination back to the source.
The actual implementation of the capability will be added in the
following patches.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since we *might* have user emulation with softmmu,
use the clearer 'CONFIG_SYSTEM_ONLY' key to check
for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
migrate_ignore_shared() is an optimization that avoids copying memory
that is visible and can be mapped on the target. However, a
memory-backend-ram or a memory-backend-memfd block with the RAM_SHARED
flag set is not migrated when migrate_ignore_shared() is true. This is
wrong, because the block has no named backing store, and its contents will
be lost. To fix, ignore shared memory iff it is a named file. Define a
new flag RAM_NAMED_FILE to distinguish this case.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <1686151116-253260-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Mechanical change running Coccinelle spatch with content
generated from the qom-cast-macro-clean-cocci-gen.py added
in the previous commit.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230601093452.38972-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, it is only done when the iteration finishes successfully.
Not cleaning up the userfaultfd write protection can lead to
symptoms/issues such as the process hanging in memmove or GDB not
being able to attach.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20230526115908.196171-1-f.ebner@proxmox.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
1. Otherwise failed migration just drops guest-panicked state, which is
not good for management software.
2. We do keep different paused states like guest-panicked during
migration with help of global_state state.
3. We do restore running state on source when migration is cancelled or
failed.
4. "postmigrate" state is documented as "guest is paused following a
successful 'migrate'", so originally it's only for successful path
and we never documented current behavior.
Let's restore paused states like guest-panicked in case of cancel or
fail too. Allow same transitions like for inmigrate state.
This commit changes the behavior that was introduced by commit
42da5550d6 "migration: set state to post-migrate on failure" and
provides a bit different fix on related
https://bugzilla.redhat.com/show_bug.cgi?id=1355683
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230517123752.21615-6-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
No logic change here, only refactoring. That's a preparation for next
commit where we finally restore the stopped vm state on migration
failure or cancellation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230517123752.21615-5-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Actually global_state_store() can never fail. Let's get rid of extra
error paths.
To make things clear, use new runstate_get() and use same approach for
global_state_store() and global_state_store_running().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230517123752.21615-3-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
All callers now pass is_external=false to aio_set_fd_handler() and
aio_set_event_notifier(). The aio_disable_external() API that
temporarily disables fd handlers that were registered is_external=true
is therefore dead code.
Remove aio_disable_external(), aio_enable_external(), and the
is_external arguments to aio_set_fd_handler() and
aio_set_event_notifier().
The entire test-fdmon-epoll test is removed because its sole purpose was
testing aio_disable_external().
Parts of this patch were generated using the following coccinelle
(https://coccinelle.lip6.fr/) semantic patch:
@@
expression ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque;
@@
- aio_set_fd_handler(ctx, fd, is_external, io_read, io_write, io_poll, io_poll_ready, opaque)
+ aio_set_fd_handler(ctx, fd, io_read, io_write, io_poll, io_poll_ready, opaque)
@@
expression ctx, notifier, is_external, io_read, io_poll, io_poll_ready;
@@
- aio_set_event_notifier(ctx, notifier, is_external, io_read, io_poll, io_poll_ready)
+ aio_set_event_notifier(ctx, notifier, io_read, io_poll, io_poll_ready)
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230516190238.8401-21-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The items in migration_files are built for libmigration and included
info softmmu_ss from there; no need to also include them directly.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Perform the function selection once, and only if CONFIG_AVX512_OPT
is enabled. Centralize the selection to xbzrle.c, instead of
spreading the init across 3 files.
Remove xbzrle-bench.c. The benefit of being able to benchmark
the different implementations is less important than not peeking
into the internals of the implementation.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Place the CONFIG_AVX512BW_OPT block at the top,
which will aid function selection in the next patch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Hi
Based on latest reviewed parts of migration:
- Disable colo (vladimir)
- Migration atomic counters (juan)
Please apply.
-----BEGIN PGP SIGNATURE-----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=3x32
-----END PGP SIGNATURE-----
Merge tag 'migration-20230518-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request
Hi
Based on latest reviewed parts of migration:
- Disable colo (vladimir)
- Migration atomic counters (juan)
Please apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmRmXJUACgkQ9IfvGFhy
# 1yNRAxAAjDYJELL34Qovt/WE9qKhYJEvIUGTl1IMWJ22YMFnqIFKRdka57dWoU3P
# 7EK1BHmokEEtzGT7Fe1ecERXsOwQIJDIkDTJ5g8Oc8Jt1iqY1AC8h5T+LghijCar
# mbZ6qWHaSjsg2lmek/xc9quymzFGGK36PSyB5WkaLRviKQn4RIkEDpUaWny7nDbA
# Q8zJJpBqNFqKfC5/DN0ePa3QQscXQJhey3nxqFd8hYp8RFNIV5UJVW5Lf6ombtK7
# atgdWC4ckkfO2z3OsghKeo/UiMFWpPktgBVVMhDLmk+P/E6czc2gfzD6SCvrPKTj
# XowI8hro22HVmq9bEY8PtbjMOfpxrAxer+tM2KR/0O9l3UzUacFsi7KGqCJ1/trQ
# 1tSDjlgyczb8GOgLwwxj8XE+jPHPfVrzCNfDqrBKBNxz6nnZSdZUwhV5mG8FdVtm
# oVVV96BIrNXLl/lIxYIFD/Zyvl8/lrSWQdLkEHTzihYQeXaQfyvPVbV/dOLT4sii
# YUuGCuEhF+DW/qz43G1krwq5/bfxsiZoQzrMV/Odtf0wYQKkabA3KNBIda/vxBCR
# dsLQ7QtmOwKmCzjqw4LUov9vDNYOYr98o7ZqwJ3qeKL4QgFwtEZUFO3VW6UR8fnF
# arVXiTn9wVlkTpu4sT5hLm9400iadhX4Fppji7Ce0tUpLbWbghA=
# =3x32
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 May 2023 10:12:53 AM PDT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [undefined]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20230518-pull-request' of https://gitlab.com/juan.quintela/qemu:
migration: Fix duplicated included in meson.build
migration/multifd: Compute transferred bytes correctly
migration: We don't need the field rate_limit_used anymore
migration: Use migration_transferred_bytes() to calculate rate_limit
migration: Add a trace for migration_transferred_bytes
migration: Move migration_total_bytes() to migration-stats.c
migration: Move rate_limit_max and rate_limit_used to migration_stats
qemu-file: Account for rate_limit usage on qemu_fflush()
migration: Don't use INT64_MAX for unlimited rate
migration: process_incoming_migration_co(): move colo part to colo
migration: split migration_incoming_co
configure: add --disable-colo-proxy option
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This is the commint with the merge error (not in the submited patch).
commit 52623f23b0
Author: Lukas Straub <lukasstraub2@web.de>
Date: Thu Apr 20 11:48:35 2023 +0200
ram-compress.c: Make target independent
Make ram-compress.c target independent.
Fixes: 52623f23b0
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230509170217.83246-1-quintela@redhat.com>
In the past, we had to put the in the main thread all the operations
related with sizes due to qemu_file not beeing thread safe. As now
all counters are atomic, we can update the counters just after the
do the write. As an aditional bonus, we are able to use the right
value for the compression methods. Right now we were assuming that
there were no compression at all.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230515195709.63843-17-quintela@redhat.com>
Since previous commit, we calculate how much data we have send with
migration_transferred_bytes() so no need to maintain this counter and
remember to always update it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230515195709.63843-10-quintela@redhat.com>
Once there rename it to migration_transferred_bytes() and pass a
QEMUFile instead of a migration object.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230515195709.63843-7-quintela@redhat.com>
These way we can make them atomic and use this functions from any
place. I also moved all functions that use rate_limit to
migration-stats.
Functions got renamed, they are not qemu_file anymore.
qemu_file_rate_limit -> migration_rate_exceeded
qemu_file_set_rate_limit -> migration_rate_set
qemu_file_get_rate_limit -> migration_rate_get
qemu_file_reset_rate_limit -> migration_rate_reset
qemu_file_acct_rate_limit -> migration_rate_account.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-6-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
That is the moment we know we have transferred something.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230515195709.63843-5-quintela@redhat.com>
Define and use RATE_LIMIT_DISABLED instead.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20230515195709.63843-2-quintela@redhat.com>
Let's make better public interface for COLO: instead of
colo_process_incoming_thread and not trivial logic around creating the
thread let's make simple colo_incoming_co(), hiding implementation from
generic code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515130640.46035-4-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Originally, migration_incoming_co was introduced by
25d0c16f62
"migration: Switch to COLO process after finishing loadvm"
to be able to enter from COLO code to one specific yield point, added
by 25d0c16f62.
Later in 923709896b
"migration: poll the cm event for destination qemu"
we reused this variable to wake the migration incoming coroutine from
RDMA code.
That was doubtful idea. Entering coroutines is a very fragile thing:
you should be absolutely sure which yield point you are going to enter.
I don't know how much is it safe to enter during qemu_loadvm_state()
which I think what RDMA want to do. But for sure RDMA shouldn't enter
the special COLO-related yield-point. As well, COLO code doesn't want
to enter during qemu_loadvm_state(), it want to enter it's own specific
yield-point.
As well, when in 8e48ac9586
"COLO: Add block replication into colo process" we added
bdrv_invalidate_cache_all() call (now it's called activate_all())
it became possible to enter the migration incoming coroutine during
that call which is wrong too.
So, let't make these things separate and disjoint: loadvm_co for RDMA,
non-NULL during qemu_loadvm_state(), and colo_incoming_co for COLO,
non-NULL only around specific yield.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515130640.46035-3-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The global dirty log synchronization is used when KVM and dirty ring
are enabled. There is a particularity for ARM64 where the backup
bitmap is used to track dirty pages in non-running-vcpu situations.
It means the dirty ring works with the combination of ring buffer
and backup bitmap. The dirty bits in the backup bitmap needs to
collected in the last stage of live migration.
In order to identify the last stage of live migration and pass it
down, an extra parameter is added to the relevant functions and
callbacks. This last stage indicator isn't used until the dirty
ring is enabled in the subsequent patches.
No functional change intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Message-Id: <20230509022122.20888-2-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All types used are forward-declared in "qemu/typedefs.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230405160454.97436-2-philmd@linaro.org>
[thuth: Add hw/core/cpu.h to migration/dirtyrate.c to fix compile failure]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Function is already quite long.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230508130909.65420-7-quintela@redhat.com>
Change all the functions that use it. It was already passed as
uint64_t.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230508130909.65420-6-quintela@redhat.com>
It is really size_t. Everything else uses uint64_t, so move this to
uint64_t as well. A size can't be negative anyways.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230508130909.65420-5-quintela@redhat.com>
That the implementation does the check every 100 milliseconds is an
implementation detail that shouldn't be seen on the interfaz.
Notice that all callers of qemu_file_set_rate_limit() used the
division or pass 0, so this change is a NOP.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230508130909.65420-4-quintela@redhat.com>
And it is the best way to not have rate_limit.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20230508130909.65420-2-quintela@redhat.com>
After the previous two patches, there is nothing else that is target
specific.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230511141208.17779-6-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230511141208.17779-5-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230511141208.17779-4-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230511141208.17779-3-quintela@redhat.com>
This significantly reduces overhead of dirty page
rate calculation in sampling mode.
Tested using 32GiB VM on E5-2690 CPU.
With CRC32:
total_pages=8388608 sampled_pages=16384 millis=71
With xxHash:
total_pages=8388608 sampled_pages=16384 millis=14
Signed-off-by: Andrei Gudkov <gudkov.andrei@huawei.com>
Message-Id: <cd115a89fc81d5f2eeb4ea7d57a98b84f794f340.1682598010.git.gudkov.andrei@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Expose qemu_cpu_list_lock globally so that we can use
WITH_QEMU_LOCK_GUARD and QEMU_LOCK_GUARD to simplify a few code paths
now and in future.
Signed-off-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427020925.51003-2-quic_jiles@quicinc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We generally require same set of capabilities on source and target.
Let's require x-colo capability to use COLO on target.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20230428194928.1426370-11-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
COLO is not listed as running state in migrate_is_running(), so, it's
theoretically possible to disable colo capability in COLO state and the
unexpected error in migration_iteration_finish() is reachable.
Let's disallow that in qmp_migrate_set_capabilities. Than the error
becomes absolutely unreachable: we can get into COLO state only with
enabled capability and can't disable it while we are in COLO state. So
substitute the error by simple assertion.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230428194928.1426370-10-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
have_colo_incoming_thread variable is unused. colo_incoming_thread can
be local.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20230428194928.1426370-6-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We don't allow to use x-colo capability when replication is not
configured. So, no reason to build COLO when replication is disabled,
it's unusable in this case.
Note also that the check in migrate_caps_check() is not the only
restriction: some functions in migration/colo.c will just abort if
called with not defined CONFIG_REPLICATION, for example:
migration_iteration_finish()
case MIGRATION_STATUS_COLO:
migrate_start_colo_process()
colo_process_checkpoint()
abort()
It could probably make sense to have possibility to enable COLO without
REPLICATION, but this requires deeper audit of colo & replication code,
which may be done later if needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230428194928.1426370-4-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
colo_checkpoint_notify() is mostly used in colo.c. Outside we use it
once when x-checkpoint-delay migration parameter is set. So, let's
simplify the external API to only that function - notify COLO that
parameter was set. This make external API more robust and hides
implementation details from external callers. Also this helps us to
make COLO module optional in further patch (i.e. we are going to add
possibility not build the COLO module).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20230428194928.1426370-3-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This will be used in the next commits to add colo support to multifd.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <88135197411df1a71d7832962b39abf60faf0021.1683572883.git.lukasstraub2@web.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is not required, colo_flush_ram_cache does not run concurrently
with the multifd threads since the cache is only flushed after
everything has been received. But it makes me more comfortable.
This will be used in the next commits to add colo support to multifd.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <35cb23ba854151d38a31e3a5c8a1020e4283cb4a.1683572883.git.lukasstraub2@web.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The overhead of the mutex in non-multifd mode is negligible,
because in that case its just the single thread taking the mutex.
This will be used in the next commits to add colo support to multifd.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <22d83cb428f37929563155531bfb69fd8953cc61.1683572883.git.lukasstraub2@web.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Commit fe904ea824 added a fail_inactivate label, which tries to
reactivate disks on the source after a failure while s->state ==
MIGRATION_STATUS_ACTIVE, but didn't actually use the label if
qemu_savevm_state_complete_precopy() failed. This failure to
reactivate is also present in commit 6039dd5b1c (also covering the new
s->state == MIGRATION_STATUS_DEVICE state) and 403d18ae (ensuring
s->block_inactive is set more reliably).
Consolidate the two labels back into one - no matter HOW migration is
failed, if there is any chance we can reach vm_start() after having
attempted inactivation, it is essential that we have tried to restart
disks before then. This also makes the cleanup more like
migrate_fd_cancel().
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230502205212.134680-1-eblake@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes compress with colo.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Make ram-compress.c target independent.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Before this series, "nothing to send" was handled by the file buffer
being empty. Now it is tracked via param->result.
Assert that the file buffer state matches the result.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
No functional changes intended.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Make compression interfaces take send_queued_data() as an argument.
Remove save_page_use_compression() from flush_compressed_data().
This removes the last ram.c dependency from the core compress code.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This makes the core compress code more independend from ram.c.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
save_page_header() accesses several global variables, so calling it
from multiple threads is pretty ugly.
Instead, call save_page_header() before writing out the compressed
data from the compress buffer to the migration stream.
This also makes the core compress code more independend from ram.c.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
And take the param->mutex lock for the whole section to ensure
thread-safety.
Now, it is explicitly clear if there is no queued data to send.
Before, this was handled by param->file stream being empty and thus
qemu_put_qemu_file() not sending anything.
This will be used in the next commits to move save_page_header()
out of compress code.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Instead introduce a extra parameter to trigger the compress thread.
Now, when the compress thread is done, we know what RAMBlock and
offset it did compress.
This will be used in the next commits to move save_page_header()
out of compress code.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This will be used in the next commits to move save_page_header()
out of compress code.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230504113841.23130-9-quintela@redhat.com>
Change all the functions that use it. It was already passed as
uint64_t.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230504113841.23130-8-quintela@redhat.com>
The first thing that we do after setting the shutdown value is set the
error as -EIO if there is not a previous error.
So this value is redundant. Just remove it and use
qemu_file_get_error() in the places that it was tested.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230504113841.23130-7-quintela@redhat.com>
After calling qemu_file_shutdown() we set the error as -EIO if there
is no another previous error, so no need to check it here.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230504113841.23130-6-quintela@redhat.com>
So delta_bytes can only be greater or equal to zero. Never negative.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230504113841.23130-3-quintela@redhat.com>
So make everything that uses it uint64_t no int64_t.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230504113841.23130-2-quintela@redhat.com>
It makes no sense first try to see if there is an rdma error and then
do nothing on postcopy stage. Change it so we check we are in
postcopy before doing anything.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230504114443.23891-6-quintela@redhat.com>
This could only happen if the source sent
RAM_SAVE_FLAG_HOOK (i.e. rdma) and destination don't have CONFIG_RDMA.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230504114443.23891-5-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230504114443.23891-4-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230504114443.23891-3-quintela@redhat.com>
Fixes this commit, clearly a bad merge after a rebase or similar, it
should have been its own case since that point.
commit 5b0e9dd46f
Author: Peter Lieven <pl@kamp.de>
Date: Tue Jun 24 11:32:36 2014 +0200
migration: catch unknown flag combinations in ram_load
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230504114443.23891-2-quintela@redhat.com>
Otherwise it is confusing with the function xbzrle_enabled().
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230504115323.24407-1-quintela@redhat.com>
I forgot to move it when I rename it from duplicated_pages.
Message-Id: <20230504103357.22130-3-quintela@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230504103357.22130-2-quintela@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We can calculate it from the QEMUFile like the caller.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230503131847.11603-6-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It is valid that params->has_block_bitmap_mapping is true and
params->block_bitmap_mapping is NULL. So we can't use the trick of
having a single function.
Move to two functions one for each value and the tests are fixed.
Fixes: b804b35b1c
migration: Create migrate_block_bitmap_mapping() function
Reported-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230503181036.14890-1-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It is not needed since we moved the accessor for tls properties to
options.c.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
It is not needed since we moved the accessor for tls properties to
options.c.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Now that we have atomic counters, we can do it on the place that we
need it, no need to do it inside ram.c.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
It is lousely based on MigrationStats, but that name is taken, so this
is the best one that I came with.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
---
If you have any good suggestion for the name, I am all ears.
migration_stats is just too long, and it is going to have more than
ram counters in the near future.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
There is already include/qemu/stats.h, so stats.h was a bad idea.
We want this file to not depend on anything else, we will move all the
migration counters/stats to this struct.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Use the attribute, which is supported by clang, instead of
the #pragma, which is not supported and, for some reason,
also not detected by the meson probe, so we fail by -Werror.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230501210555.289806-1-richard.henderson@linaro.org>
As we set its value, it needs to be operated with atomics.
We rename it from remaining to better reflect its meaning.
Statistics always return the real reamaining bytes. This was used to
store how much pages where dirty on the previous generation, so we can
calculate the expected downtime as: dirty_bytes_last_sync /
current_bandwith.
If we use the actual remaining bytes, we would see a very small value
at the end of the iteration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
I am open to use ram_bytes_remaining() in its only use and be more
"optimistic" about the downtime.
Don't use __nocheck() functions.
Use stat64_get() now that it exists.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
---
Don't use __nocheck() variants
Use stat64_get()
We need to add a new flag to mean to flush at that point.
Notice that we still flush at the end of setup and at the end of
complete stages.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
---
Add missing qemu_fflush(), now it passes all tests always.
In the previous version, the check that changes the default value to
false got lost in some rebase. Get it back.
We only need to do that on the ram_save_iterate() call on sending and
on destination when we get a RAM_SAVE_FLAG_EOS.
In setup() and complete() we need to synch in both new and old cases,
so don't add a check there.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
---
Remove the wrappers that we take out on patch 5.
We used to flush all channels at the end of each RAM section
sent. That is not needed, so preparing to only flush after a full
iteration through all the RAM.
Default value of the property is false. But we return "true" in
migrate_multifd_flush_after_each_section() until we implement the code
in following patches.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
---
Rename each-iteration to after-each-section
Rename multifd-sync-after-each-section to
multifd-flush-after-each-section
Move to machine-8.0 (peter)
Notice that we changed the test of ->has_block_bitmap_mapping
for the test that block_bitmap_mapping is not NULL.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
---
Make it return const (vladimir)
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
---
Moved the type to const char * (vladimir)
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
---
Moved the type to const char * (vladimir)
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
---
Moved the type to const char * (vladimir)
This makes the function more regular with everything else.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Once there, make it more regular and remove the need for
MigrationState parameter.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
We don't wait in the sem when we are doing a sync_main. Make it wait
there. To make things clearer, we mark the channel ready at the
begining of the thread loop.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
For VMS_ARRAY typed vmsd fields, also dump the number of entries in the
array in -vmstate-dump.
Without such information, vmstate static checker can report false negatives
of incompatible vmsd on VMS_ARRAY typed fields, when the src/dst do not
have the same type of array defined. It's because in the checker we only
check against size of fields within a VMSD field.
One example: e1000e used to have a field defined as a boolean array with 5
entries, then removed it and replaced it with UNUSED (in 31e3f318c8):
- VMSTATE_BOOL_ARRAY(core.eitr_intr_pending, E1000EState,
- E1000E_MSIX_VEC_NUM),
+ VMSTATE_UNUSED(E1000E_MSIX_VEC_NUM),
It's a legal replacement but vmstate static checker is not happy with it,
because it checks only against the "size" field between the two
fields (here one is BOOL_ARRAY, the other is UNUSED):
For BOOL_ARRAY:
{
"field": "core.eitr_intr_pending",
"version_id": 0,
"field_exists": false,
"size": 1
},
For UNUSED:
{
"field": "unused",
"version_id": 0,
"field_exists": false,
"size": 5
},
It's not the script to blame because there's just not enough information
dumped to show the total size of the entry for an array. Add it.
Note that this will not break old vmstate checker because the field will
just be ignored.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Instead of print it to STDERR, bring the error upwards so that it can be
reported via QMP responses.
E.g.:
{ "execute": "migrate-set-capabilities" ,
"arguments": { "capabilities":
[ { "capability": "postcopy-ram", "state": true } ] } }
{ "error":
{ "class": "GenericError",
"desc": "Postcopy is not supported: Host backend files need to be TMPFS
or HUGETLBFS only" } }
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Once there, rename it to migrate_tls() and make it return bool for
consistency.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
---
Fix typos found by fabiano
Since the introduction of multifd, it's possible to perform a multifd
migration and finish it using postcopy.
A bug introduced by yank (fixed on cfc3bcf373) was previously preventing
a successful use of this migration scenario, and now thing should be
working on most scenarios.
But since there is not enough testing/support nor any reported users for
this scenario, we should disable this combination before it may cause any
problems for users.
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
To be consistent with every other parameter, rename to
migrate_block_incremental().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
---
Fixed missing space after comma (fabiano)
Once that we are there, we rename the function to migrate_return_path()
to be consistent with all other capabilities.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Once that we are there, we rename the function to migrate_block()
to be consistent with all other capabilities.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Once that we are there, we rename the function to migrate_xbzrle()
to be consistent with all other capabilities.
We change the type to return bool also for consistency.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Once that we are there, we rename the function to
migrate_zero_copy_send() to be consistent with all other capabilities.
We can remove the CONFIG_LINUX guard. We already check that we can't
setup this capability in migrate_caps_check().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Once that we are there, we rename the function to migrate_multifd()
to be consistent with all other capabilities.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Once that we are there, we rename the function to migrate_events()
to be consistent with all other capabilities.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Once that we are there, we rename the function to migrate_compress()
to be consistent with all other capabilities.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Once that we are there, we rename the function to migrate_colo() to be
consistent with all other capabilities.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
We move there all capabilities helpers from migration.c.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
Following David advise:
- looked through the history, capabilities are newer than 2012, so we
can remove that bit of the header.
- This part is posterior to Anthony.
Original Author is Orit. Once there,
I put myself. Peter Xu also did quite a bit of work here.
Anyone else wants/needs to be there? I didn't search too hard
because nobody asked before to be added.
What do you think?
And remove the convoluted use of qmp_migrate_set_capabilities() to
enable disable MIGRATION_CAPABILITY_BLOCK.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
It has nothing to do with migration, except for the "migrate" in the
name of the command. Move it with the rest of the ui commands.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
It is only used there, so we can make it static.
Once there, remove spice.h that it is not used.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
---
fix David Edmonson ui/qemu-spice.h unintended removal
No need to declare a temporary variable.
Suggested-by: Juan Quintela <quintela@redhat.com>
Fixes: 1df36e8c6289 ("migration: Handle block device inactivation failures better")
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We used to pass the old capabilities array and the new
capabilities as a list.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
It is clear from the context what that means, and such a long name
with the extra long names of the capabilities make very difficilut to
stay inside the 80 columns limit.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Postcopy requires the memory support userfaultfd to work. Right now we
check it but it's a bit too late (when switching to postcopy migration).
Do that early right at enabling of postcopy.
Note that this is still only a best effort because ramblocks can be
dynamically created. We can add check in hostmem creations and fail if
postcopy enabled, but maybe that's too aggressive.
Still, we have chance to fail the most obvious where we know there's an
existing unsupported ramblock.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Consider what happens when performing a migration between two host
machines connected to an NFS server serving multiple block devices to
the guest, when the NFS server becomes unavailable. The migration
attempts to inactivate all block devices on the source (a necessary
step before the destination can take over); but if the NFS server is
non-responsive, the attempt to inactivate can itself fail. When that
happens, the destination fails to get the migrated guest (good,
because the source wasn't able to flush everything properly):
(qemu) qemu-kvm: load of migration failed: Input/output error
at which point, our only hope for the guest is for the source to take
back control. With the current code base, the host outputs a message, but then appears to resume:
(qemu) qemu-kvm: qemu_savevm_state_complete_precopy_non_iterable: bdrv_inactivate_all() failed (-1)
(src qemu)info status
VM status: running
but a second migration attempt now asserts:
(src qemu) qemu-kvm: ../block.c:6738: int bdrv_inactivate_recurse(BlockDriverState *): Assertion `!(bs->open_flags & BDRV_O_INACTIVE)' failed.
Whether the guest is recoverable on the source after the first failure
is debatable, but what we do not want is to have qemu itself fail due
to an assertion. It looks like the problem is as follows:
In migration.c:migration_completion(), the source sets 'inactivate' to
true (since COLO is not enabled), then tries
savevm.c:qemu_savevm_state_complete_precopy() with a request to
inactivate block devices. In turn, this calls
block.c:bdrv_inactivate_all(), which fails when flushing runs up
against the non-responsive NFS server. With savevm failing, we are
now left in a state where some, but not all, of the block devices have
been inactivated; but migration_completion() then jumps to 'fail'
rather than 'fail_invalidate' and skips an attempt to reclaim those
those disks by calling bdrv_activate_all(). Even if we do attempt to
reclaim disks, we aren't taking note of failure there, either.
Thus, we have reached a state where the migration engine has forgotten
all state about whether a block device is inactive, because we did not
set s->block_inactive in enough places; so migration allows the source
to reach vm_start() and resume execution, violating the block layer
invariant that the guest CPUs should not be restarted while a device
is inactive. Note that the code in migration.c:migrate_fd_cancel()
will also try to reactivate all block devices if s->block_inactive was
set, but because we failed to set that flag after the first failure,
the source assumes it has reclaimed all devices, even though it still
has remaining inactivated devices and does not try again. Normally,
qmp_cont() will also try to reactivate all disks (or correctly fail if
the disks are not reclaimable because NFS is not yet back up), but the
auto-resumption of the source after a migration failure does not go
through qmp_cont(). And because we have left the block layer in an
inconsistent state with devices still inactivated, the later migration
attempt is hitting the assertion failure.
Since it is important to not resume the source with inactive disks,
this patch marks s->block_inactive before attempting inactivation,
rather than after succeeding, in order to prevent any vm_start() until
it has successfully reactivated all devices.
See also https://bugzilla.redhat.com/show_bug.cgi?id=2058982
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Rest of counters that refer to pages has a _pages suffix.
And historically, this showed the number of full pages transferred.
The name "normal" refered to the fact that they were sent without any
optimization (compression, xbzrle, zero_page, ...).
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Rest of counters that refer to pages has a _pages suffix.
And historically, this showed the number of pages composed of the same
character, here comes the name "duplicated". But since years ago, it
refers to the number of zero_pages.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
In the spirit of:
commit 394d323bc3451e4d07f13341cb8817fac8dfbadd
Author: Peter Xu <peterx@redhat.com>
Date: Tue Oct 11 17:55:51 2022 -0400
migration: Use atomic ops properly for page accountings
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Using MgrationStats as type for ram_counters mean that we didn't have
to re-declare each value in another struct. The need of atomic
counters have make us to create MigrationAtomicStats for this atomic
counters.
Create RAMStats type which is a merge of MigrationStats and
MigrationAtomicStats removing unused members.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
---
Fix typos found by David Edmondson
It does not even pair with a qatomic_mb_set(), so it is clearer to use
load-acquire in this case; they are synonyms.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There should be no paths from a coroutine_fn to aio_poll, however in
practice coroutine_mixed_fn will call aio_poll in the !qemu_in_coroutine()
path. By marking mixed functions, we can track accurately the call paths
that execute entirely in coroutine context, and find more missing
coroutine_fn markers. This results in more accurate checks that
coroutine code does not end up blocking.
If the marking were extended transitively to all functions that call
these ones, static analysis could be done much more efficiently.
However, this is a start and makes it possible to use vrc's path-based
searches to find potential bugs where coroutine_fns call blocking functions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I removed that bit on commit:
commit c8df4a7aef
Author: Juan Quintela <quintela@redhat.com>
Date: Mon Oct 3 02:00:03 2022 +0200
migration: Split save_live_pending() into state_pending_*
Fixes: c8df4a7aef
Suggested-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Since ec6f3ab9, migration with compress enabled was broken, because
the compress threads use a dummy QEMUFile which just acts as a
buffer and that commit accidentally changed it to use the outgoing
migration channel instead.
Fix this by using the dummy file again in the compress threads.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In 8.0 devel window we reworked preempt channel creation, so that there'll
be no race condition when the migration channel and preempt channel got
established in the wrong order in commit 5655aab079.
However no one noticed that the change will also be not compatible with
older qemus, majorly 7.1/7.2 versions where preempt mode started to be
supported.
Leverage the same pre-7.2 flag introduced in the previous patch to recover
the behavior hopefully before 8.0 releases, so we don't break migration
when we migrate from 8.0 to older qemu binaries.
Fixes: 5655aab079 ("migration: Postpone postcopy preempt channel to be after main")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
postcopy_qemufile_src object should be owned by one thread, either the main
thread (e.g. when at the beginning, or at the end of migration), or by the
return path thread (when during a preempt enabled postcopy migration). If
that's not the case the access to the object might be racy.
postcopy_preempt_shutdown_file() can be potentially racy, because it's
called at the end phase of migration on the main thread, however during
which the return path thread hasn't yet been recycled; the recycle happens
in await_return_path_close_on_source() which is after this point.
It means, logically it's posslbe the main thread and the return path thread
are both operating on the same qemufile. While I don't think qemufile is
thread safe at all.
postcopy_preempt_shutdown_file() used to be needed because that's where we
send EOS to dest so that dest can safely shutdown the preempt thread.
To avoid the possible race, remove this only place that a race can happen.
Instead we figure out another way to safely close the preempt thread on
dest.
The core idea during postcopy on deciding "when to stop" is that dest will
send a postcopy SHUT message to src, telling src that all data is there.
Hence to shut the dest preempt thread maybe better to do it directly on
dest node.
This patch proposed such a way that we change postcopy_prio_thread_created
into PreemptThreadStatus, so that we kick the preempt thread on dest qemu
by a sequence of:
mis->preempt_thread_status = PREEMPT_THREAD_QUIT;
qemu_file_shutdown(mis->postcopy_qemufile_dst);
While here shutdown() is probably so far the easiest way to kick preempt
thread from a blocked qemu_get_be64(). Then it reads preempt_thread_status
to make sure it's not a network failure but a willingness to quit the
thread.
We could have avoided that extra status but just rely on migration status.
The problem is postcopy_ram_incoming_cleanup() is just called early enough
so we're still during POSTCOPY_ACTIVE no matter what.. So just make it
simple to have the status introduced.
One flag x-preempt-pre-7-2 is added to keep old pre-7.2 behaviors of
postcopy preempt.
Fixes: 9358982744 ("migration: Send requested page directly in rp-return thread")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Uses of blk_nb_sectors must check whether the result is negative.
Otherwise, underflow can happen. Fortunately, alloc_aio_bitmap()
and bmds_aio_inflight() both have an alternative way to retrieve the
number of sectors in the file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-6-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This had been pulled in via qemu/plugin.h from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org>
[AJB: add various additional cases shown by CI]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
Include CONFIG_DEVICES so that populate_vfio_info is instantiated for
CONFIG_VFIO. Without it, the 'info migrate' command never returns
info about vfio.
Fixes: 43bd0bf30f ("migration: Move populate_vfio_info() into a separate file")
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The p->flags could be updated via the send_prepare callback, e.g. OR-ed
with MULTIFD_FLAG_ZLIB via zlib_send_prepare. Assign p->flags to the
local "flags" before the send_prepare callback could only get partial of
p->flags. Fix it by moving the assignment of p->flags to the local flags
after the callback, so that the correct flags can be traced.
Fixes: ab7cbb0b9a ("multifd: Make no compression operations into its own structure")
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It's no longer needed since commit
44bcfd45e9 ("migration/rdma: destination: create the return patch after the first accept")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
xbzrle_encode_buffer_avx512() checks for overflows too scarcely in its
outer loop, causing out-of-bounds writes:
$ ../configure --target-list=aarch64-softmmu --enable-sanitizers --enable-avx512bw
$ make tests/unit/test-xbzrle && ./tests/unit/test-xbzrle
==5518==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x62100000b100 at pc 0x561109a7714d bp 0x7ffed712a440 sp 0x7ffed712a430
WRITE of size 1 at 0x62100000b100 thread T0
#0 0x561109a7714c in uleb128_encode_small ../util/cutils.c:831
#1 0x561109b67f6a in xbzrle_encode_buffer_avx512 ../migration/xbzrle.c:275
#2 0x5611099a7428 in test_encode_decode_overflow ../tests/unit/test-xbzrle.c:153
#3 0x7fb2fb65a58d (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x7a58d)
#4 0x7fb2fb65a333 (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x7a333)
#5 0x7fb2fb65aa79 in g_test_run_suite (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x7aa79)
#6 0x7fb2fb65aa94 in g_test_run (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x7aa94)
#7 0x5611099a3a23 in main ../tests/unit/test-xbzrle.c:218
#8 0x7fb2fa78c082 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x24082)
#9 0x5611099a608d in _start (/qemu/build/tests/unit/test-xbzrle+0x28408d)
0x62100000b100 is located 0 bytes to the right of 4096-byte region [0x62100000a100,0x62100000b100)
allocated by thread T0 here:
#0 0x7fb2fb823a06 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cc:153
#1 0x7fb2fb637ef0 in g_malloc0 (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x57ef0)
Fix that by performing the overflow check in the inner loop, instead.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
__builtin_ctzll() produces undefined results when the argument is 0.
This can be seen through test-xbzrle, which produces the following
warning:
../migration/xbzrle.c:265: runtime error: passing zero to ctz(), which is not a valid argument
Replace __builtin_ctzll() with our ctz64() wrapper which properly
handles 0.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The RDMA code has return-path handling code, but it's only enabled
if postcopy is enabled; if the 'return-path' migration capability
is enabled, the return path is NOT setup but the core migration
code still tries to use it and breaks.
Enable the RDMA return path if either postcopy or the return-path
capability is enabled.
bz: https://bugzilla.redhat.com/show_bug.cgi?id=2063615
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
QEMU main thread will wait until dest preempt channel established during
processing the LISTEN command (within the whole postcopy PACKAGED data), by
waiting on the semaphore postcopy_qemufile_dst_done.
That's racy, because it's possible that the dest QEMU main thread hasn't
yet accept()ed the new connection when processing the LISTEN event. The
sem_wait() will yield the main thread without being able to run anything
else including the accept() of the new socket, which can cause deadlock
within the main thread.
To avoid the race, move the "wait channel" from main thread to the preempt
thread right at the start.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 5655aab079 ("migration: Postpone postcopy preempt channel to be after main")
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
* Use cmd instead of /bin/sh on Windows.
* Try to auto-detect cmd.exe's path, but default to a hard-coded path.
Note that this will require that gspawn-win[32|64]-helper.exe and
gspawn-win[32|64]-helper-console.exe are included in the Windows binary
distributions (cc: Stefan Weil).
Signed-off-by: "John Berberian, Jr" <jeb.study@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The QERR_ macros are leftovers from the days of "rich" error objects.
We've been trying to reduce their remaining use.
Get rid of a use of QERR_FEATURE_DISABLED, and improve the somewhat
imprecise error message
(qemu) x_colo_lost_heartbeat
Error: The feature 'colo' is not enabled
to
Error: VM is not in COLO mode
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-12-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Once that res_compatible is removed, they don't make sense anymore.
We remove the _only preffix. And to make things clearer we rename
them to must_precopy and can_postcopy.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Nothing assigns to it after previous commit.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
So remove last assignation of res_compatible.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Finish the conversion from commit fe80c0241d
("migration: using trace_ to replace DPRINTF").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add new function qemu_file_get_to_fd() that allows reading data from
QEMUFile and writing it straight into a given fd.
This will be used later in VFIO migration code.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
0x80 is RAM_SAVE_FLAG_HOOK, it is in qemu-file now.
Bigger usable flag is 0x200, noticing that.
We can reuse RAM_SAVe_FLAG_FULL.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Currently running migration_incoming_state_destroy() without first running
multifd_load_cleanup() will cause a yank error:
qemu-system-x86_64: ../util/yank.c:107: yank_unregister_instance:
Assertion `QLIST_EMPTY(&entry->yankfns)' failed.
(core dumped)
The above error happens in the target host, when multifd is being used
for precopy, and then postcopy is triggered and the migration finishes.
This will crash the VM in the target host.
To avoid that, move multifd_load_cleanup() inside
migration_incoming_state_destroy(), so that the load cleanup becomes part
of the incoming state destroying process.
Running multifd_load_cleanup() twice can become an issue, though, but the
only scenario it could be ran twice is on process_incoming_migration_bh().
So removing this extra call is necessary.
On the other hand, this multifd_load_cleanup() call happens way before the
migration_incoming_state_destroy() and having this happening before
dirty_bitmap_mig_before_vm_start() and vm_start() may be a need.
So introduce a new function multifd_load_shutdown() that will mainly stop
all multifd threads and close their QIOChannels. Then use this function
instead of multifd_load_cleanup() to make sure nothing else is received
before dirty_bitmap_mig_before_vm_start().
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Current approach will only join threads that are still running.
For the threads not joined, resources or private memory are always kept in
the process space and never reclaimed before process end, and this risks
serious memory leaks.
This should usually not represent a big problem, since multifd migration
is usually just ran at most a few times, and after it succeeds there is
not much to be done before exiting the process.
Yet still, it should not hurt performance to join all of them.
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Before assigning "p->quit = true" for every multifd channel,
multifd_load_cleanup() will call multifd_recv_terminate_threads() which
already does the same assignment, while protected by a mutex.
So there is no point doing the same assignment again.
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Since it's introduction in commit f986c3d256 ("migration: Create multifd
migration threads"), multifd_load_cleanup() never returned any value
different than 0, neither set up any error on errp.
Even though, on process_incoming_migration_bh() an if clause uses it's
return value to decide on setting autostart = false, which will never
happen.
In order to simplify the codebase, change multifd_load_cleanup() signature
to 'void multifd_load_cleanup(void)', and for every usage remove error
handling or decision made based on return value != 0.
Fixes: b5eea99ec2 ("migration: Add yank feature")
Reported-by: Li Xiaohui <xiaohli@redhat.com>
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy with preempt-mode enabled needs two channels to communicate. The
order of channel establishment is not guaranteed. It can happen that the
dest QEMU got the preempt channel connection request before the main
channel is established, then the migration may make no progress even during
precopy due to the wrong order.
To fix it, create the preempt channel only if we know the main channel is
established.
For a general postcopy migration, we delay it until postcopy_start(),
that's where we already went through some part of precopy on the main
channel. To make sure dest QEMU has already established the channel, we
wait until we got the first PONG received. That's something we do at the
start of precopy when postcopy enabled so it's guaranteed to happen sooner
or later.
For a postcopy recovery, we delay it to qemu_savevm_state_resume_prepare()
where we'll have round trips of data on bitmap synchronizations, which
means the main channel must have been established.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is mostly useless, but useful for us to know whether the main channel
is correctly established without changing the migration protocol.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Since we just dropped the only case where postcopy_preempt_setup() can
return an error, it doesn't need a retval anymore because it never fails.
Move the preempt check to the caller, preparing it to be used elsewhere to
do nothing but as simple as kicking the async connection.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The whole idea of multi-channel checks was not properly done, IMHO.
Currently we check multi-channel in a lot of places, but actually that's
not needed because we only need to check it right after we get the URI and
that should be it.
If the URI check succeeded, we should never need to check it again because
we must have it. If it check fails, we should fail immediately on either
the qmp_migrate or qmp_migrate_incoming, instead of failingg it later after
the connection established.
Neither should we fail any set capabiliities like what we used to do here:
5ad15e8614 ("migration: allow enabling mutilfd for specific protocol only", 2021-10-19)
Because logically the URI will only be set later after the capability is
set, so it doesn't make a lot of sense to check the URI type when setting
the capability, because we're checking the cap with an old URI passed in,
and that may not even be the URI we're going to use later.
This patch mostly reverted all such checks for before, dropping the
variable migrate_allow_multi_channels and helpers. Instead, add a common
helper to check URI for multi-channels for either qmp_migrate and
qmp_migrate_incoming and that should do all the proper checks. The failure
will only trigger with the "migrate" or "migrate_incoming" command, or when
user specified "-incoming xxx" where "xxx" is not "defer".
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This commit is the same with [PATCH v6 1/2], and provides avx512 support for xbzrle_encode_buffer
function to accelerate xbzrle encoding speed. Runtime check of avx512
support and benchmark for this feature are added. Compared with C
version of xbzrle_encode_buffer function, avx512 version can achieve
50%-70% performance improvement on benchmarking. In addition, if dirty
data is randomly located in 4K page, the avx512 version can achieve
almost 140% performance gain.
Signed-off-by: ling xu <ling1.xu@intel.com>
Co-authored-by: Zhou Zhao <zhou.zhao@intel.com>
Co-authored-by: Jun Jin <jun.i.jin@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
I called the helper function from the wrong top level function.
This code was introduced in:
commit c8df4a7aef
Author: Juan Quintela <quintela@redhat.com>
Date: Mon Oct 3 02:00:03 2022 +0200
migration: Split save_live_pending() into state_pending_*
We split the function into to:
- state_pending_estimate: We estimate the remaining state size without
stopping the machine.
- state pending_exact: We calculate the exact amount of remaining
state.
Thanks to Avihai Horon <avihaih@nvidia.com> for finding it.
Fixes:c8df4a7aeffcb46020f610526eea621fa5b0cd47
When we introduced that patch, we enden calling
state_pending_estimate() helper from qemu_savevm_statepending_exact()
and
state_pending_exact() helper from qemu_savevm_statepending_estimate()
This patch fixes it.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We are going to create a new function for multifd latest in the series.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We are recalculating ram size continously, when we know that it don't
change during migration. Create a field in RAMState to track it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
It is just a big if in the middle of the function, and we need two
functions anways.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
Reindent to make Phillipe happy (and CODING_STYLE)
We used to return two bools, just return a single int with the
following meaning:
old return / again / new return
false false PAGE_ALL_CLEAN
false true PAGE_TRY_AGAIN
true true PAGE_DIRTY_FOUND /* We don't care about again at all */
Signed-off-by: Juan Quintela <quintela@redhat.com>
We will need later that find_dirty_block() return errors, so
simplify the loop.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Cleanup multifd_channel_connect
Signed-off-by: Li Zhang <lizhang@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
I introduced spurious files on my tree during a rebase:
commit ebfc578715
Author: Zhenzhong Duan <zhenzhong.duan@intel.com>
Date: Mon Oct 17 15:53:51 2022 +0800
multifd: Fix flush of zero copy page send request
Make IO channel flush call after the inflight request has been drained
in multifd thread, or else we may missed to flush the inflight request.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
To make things worse, it appears like Zhenzhong is the one to blame.
for(int i=0; i < 1000000; i++) {
printf("I will not do rebases when I am tired\n");
}
Sorry, Juan.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tracked down with the help of scripts/clean-includes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230202133830.2152150-21-armbru@redhat.com>
To support query migration thread infomation, save and delete
thread(live_migration and multifdsend) information at thread
creation and finish.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introduce interface query-migrationthreads. The interface is used
to query information about migration threads and returns with
migration thread's name and its id.
Introduce threadinfo.c to manage threads with migration.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Make IO channel flush call after the inflight request has been drained
in multifd thread, or else we may missed to flush the inflight request.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In multifd_queue_page() MultiFDPages_t.block is checked twice.
Between the two checks, MultiFDPages_t.block may be reset to NULL
by multifd thread. This lead to the 2nd check always true then a
redundant page submitted to multifd thread again.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Current logic assumes that channel connections on the destination side are
always established in the same order as the source and the first one will
always be the main channel followed by the multifid or post-copy
preemption channel. This may not be always true, as even if a channel has a
connection established on the source side it can be in the pending state on
the destination side and a newer connection can be established first.
Basically causing out of order mapping of channels on the destination side.
Currently, all channels except post-copy preempt send a magic number, this
patch uses that magic number to decide the type of channel. This logic is
applicable only for precopy(multifd) live migration, as mentioned, the
post-copy preempt channel does not send any magic number. Also, tls live
migrations already does tls handshake before creating other channels, so
this issue is not possible with tls, hence this logic is avoided for tls
live migrations. This patch uses read peek to check the magic number of
channels so that current data/control stream management remains
un-effected.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: manish.mishra <manish.mishra@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
MSG_PEEK peeks at the channel, The data is treated as unread and
the next read shall still return this data. This support is
currently added only for socket class. Extra parameter 'flags'
is added to io_readv calls to pass extra read flags like MSG_PEEK.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: manish.mishra <manish.mishra@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The value of "Sample Pages" is confusing in mode other than page-sampling.
See below:
(qemu) calc_dirty_rate -b 10 520
(qemu) info dirty_rate
Status: measuring
Start Time: 11646834 (ms)
Sample Pages: 520 (per GB)
Period: 10 (sec)
Mode: dirty-bitmap
Dirty rate: (not ready)
(qemu) info dirty_rate
Status: measured
Start Time: 11646834 (ms)
Sample Pages: 0 (per GB)
Period: 10 (sec)
Mode: dirty-bitmap
Dirty rate: 2 (MB/s)
While it's totally useless in dirty-ring and dirty-bitmap mode, fix to
show it only in page-sampling mode.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Perform a check on vmsd structures during test runs in the hope
of catching any missing terminators and other simple screwups.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We fairly regularly forget VMSTATE_END_OF_LIST markers off descriptions;
given that the current check is only for ->name being NULL, sometimes
we get unlucky and the code apparently works and no one spots the error.
Explicitly add a flag, VMS_END that should be set, and assert it is
set during the traversal.
Note: This can't go in until we update the copy of vmstate.h in slirp.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
upon errors. As the documentation in include/io/channel.h states, only
-1 and QIO_CHANNEL_ERR_BLOCK should be returned upon error. Other
values have the potential to confuse the call sites.
error_setg is used rather than error_setg_errno, because there are
certain code paths where -1 (as a non-errno) is propagated up (e.g.
starting from qemu_rdma_block_for_wrid or qemu_rdma_post_recv_control)
all the way to qio_channel_rdma_{readv,writev}.
Similar to a216ec85b7 ("migration/channel-block: fix return value for
qio_channel_block_{readv,writev}").
Suggested-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The downtime should be displayed during postcopy phase because the
switchover phase is done. OTOH it's weird to show "expected downtime"
which can confuse what does that mean if the switchover has already
happened anyway.
This is a slight ABI change on QMP, but I assume it shouldn't affect
anyone.
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Let's factor out this check, to be used in virtio-mem context next.
While at it, fix a spelling error in a related comment.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>S
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
For virtio-mem, we want to have the plugged/unplugged state of memory
blocks available before migrating any actual RAM content, and perform
sanity checks before touching anything on the destination. This
information is immutable on the migration source while migration is active,
We want to use this information for proper preallocation support with
migration: currently, we don't preallocate memory on the migration target,
and especially with hugetlb, we can easily run out of hugetlb pages during
RAM migration and will crash (SIGBUS) instead of catching this gracefully
via preallocation.
Migrating device state via a VMSD before we start iterating is currently
impossible: the only approach that would be possible is avoiding a VMSD
and migrating state manually during save_setup(), to be restored during
load_state().
Let's allow for migrating device state via a VMSD early, during the
setup phase in qemu_savevm_state_setup(). To keep it simple, we
indicate applicable VMSD's using an "early_setup" flag.
Note that only very selected devices (i.e., ones seriously messing with
RAM setup) are supposed to make use of such early state migration.
While at it, also use a bool for the "unmigratable" member.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>S
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
... and store it in the migration state. This is a preparation for
storing selected vmds's already in qemu_savevm_state_setup().
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Let's move more code into vmstate_save(), reducing code duplication and
preparing for reuse of vmstate_save() in qemu_savevm_state_setup(). We
have to move vmstate_save() to make the compiler happy.
We'll now also trace from qemu_save_device_state(), triggering the same
tracepoints as previously called from
qemu_savevm_state_complete_precopy_non_iterable() only. Note that
qemu_save_device_state() ignores iterable device state, such as RAM,
and consequently doesn't trigger some other trace points (e.g.,
trace_savevm_state_setup()).
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
ram_block_populate_read() already optimizes for RamDiscardManager.
However, ram_write_tracking_start() will still try protecting discarded
memory ranges.
Let's optimize, because discarded ranges don't map any pages and
(1) For anonymous memory, trying to protect using uffd-wp without a mapped
page is ignored by the kernel and consequently a NOP.
(2) For shared/file-backed memory, we will fill present page tables in the
range with PTE markers. However, we will even allocate page tables
just to fill them with unnecessary PTE markers and effectively
waste memory.
So let's exclude these ranges, just like ram_block_populate_read()
already does.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
ram_mig_ram_block_resized() will abort migration (including background
snapshots) when resizing a RAMBlock. ram_block_populate_read() will only
populate RAM up to used_length, so at least for anonymous memory
protecting everything between used_length and max_length won't
actually be protected and is just a NOP.
So let's only protect everything up to used_length.
Note: it still makes sense to register uffd-wp for max_length, such
that RAM_UF_WRITEPROTECT is independent of a changing used_length.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When unregistering uffd-wp, older kernels before commit f369b07c86143
("mm/uffd:reset write protection when unregister with wp-mode") won't
clear the uffd-wp PTE bit. When re-registering uffd-wp, the previous
uffd-wp PTE bits would trigger again. With above commit, the kernel will
clear the uffd-wp PTE bits when unregistering itself.
Consequently, we'll clear the uffd-wp PTE bits now twice -- whereby we
don't care about clearing them at all: a new background snapshot will
re-register uffd-wp and re-protect all memory either way.
So let's skip the manual clearing of uffd-wp. If ever relevant, we
could clear conditionally in uffd_unregister_memory() -- we just need a
way to figure out more recent kernels.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If something goes wrong during uffd_change_protection(), we would miss
to unregister uffd-wp and not release our reference. Fix it by
performing the uffd_change_protection(true) last.
Note that a uffd_change_protection(false) on the recovery path without a
prior uffd_change_protection(false) is fine.
Fixes: 278e2f551a ("migration: support UFFD write fault processing in ram_save_iterate()")
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Unfortunately, commit f7b9dcfbcf broke populate_read_range(): the loop
end condition is very wrong, resulting in that function not populating the
full range. Lets' fix that.
Fixes: f7b9dcfbcf ("migration/ram: Factor out populating pages readable in ram_block_populate_pages()")
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add a helper to create the uffd handle.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Until previous commit, save_live_pending() was used for ram. Now with
the split into state_pending_estimate() and state_pending_exact() it
is not needed anymore, so remove them.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
