Commit Graph

144 Commits

Author SHA1 Message Date
Philippe Mathieu-Daudé c39f95dc2d tpm: add stubs
Commit c37cacabf2 moved tpm_cleanup() in the main loop exit, however this
function is not available when compiling with --disable-tpm.

Provides necessary stubs to keep code clean of #ifdef'fery.

Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20171023102903.256AF7456A0@zero.eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-10-25 01:05:04 -04:00
Vadim Galitsyn 9aa3397f19 qmp: introduce query-memory-size-summary command
Add a new query-memory-size-summary command which provides the
following memory information in bytes:

  * base-memory - size of "base" memory specified with command line option -m.

  * plugged-memory - amount of memory that was hot-plugged.
    If target does not have CONFIG_MEM_HOTPLUG enabled, no
    value is reported.

Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Mohammed Gamal <mohammed.gamal@profitbricks.com>
Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com>
Reviewed-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: qemu-devel@nongnu.org
Message-Id: <20170829153022.27004-3-vadim.galitsyn@profitbricks.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Fixup comments as per Igor's review
  Added 'of' from Vadim's reply
2017-09-14 15:52:10 +01:00
Anthony PERARD ab938ae43f hw/acpi: Move acpi_set_pci_info to pcihp
HW part of ACPI PCI hotplug in QEMU depends on ACPI_PCIHP_PROP_BSEL
being set on a PCI bus that supports ACPI hotplug. It should work
regardless of the source of ACPI tables (QEMU generator/legacy SeaBIOS/Xen).
So move ACPI_PCIHP_PROP_BSEL initialization into HW ACPI implementation
part from QEMU's ACPI table generator.

To do PCI passthrough with Xen, the property ACPI_PCIHP_PROP_BSEL needs
to be set, but this was done only when ACPI tables are built which is
not needed for a Xen guest. The need for the property starts with commit
"pc: pcihp: avoid adding ACPI_PCIHP_PROP_BSEL twice"
(f0c9d64a68).

Adding find_i440fx into stubs so that mips-softmmu target can be built.

Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08 16:15:17 +03:00
Fam Zheng 80adf54ecc stubs: Add vm state change handler stubs
They will be used by BlockBackend code in block-obj-y, which doesn't
always get linked with common-obj-y. Add stubs to keep ld happy.

Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170815130740.31229-2-famz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2017-08-15 10:03:27 -05:00
Juan Quintela 1bfe5f0586 migration: Move check_migratable() into qdev.c
The function is only used once, and nothing else in migration knows
about objects.  Create the function vmstate_device_is_migratable() in
savem.c that really do the bit that is related with migration.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
2017-05-17 12:04:59 +02:00
Juan Quintela 795c40b8bd migration: Create migration/blocker.h
This allows us to remove lots of includes of migration/migration.h

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-17 12:04:59 +02:00
Anthony Xu 93d43e7e11 move xen-hvm.c to hw/i386/xen/
move xen-hvm.c to hw/i386/xen/

Signed-off -by: Anthony Xu <anthony.xu@intel.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-04-25 11:04:34 -07:00
Anthony Xu 56e2cd2452 move xen-common.c to hw/xen/
move xen-common.c to hw/xen/

Signed-off -by: Anthony Xu <anthony.xu@intel.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-04-25 11:04:34 -07:00
Paolo Bonzini 3f53bc61a4 cpus: define QEMUTimerListNotifyCB for QEMU system emulation
There is no change for now, because the callback just invokes
qemu_notify_event.

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-14 13:28:29 +01:00
Peter Maydell 9a81b792cc virtio, pc: fixes, features
virtio support for region caches broke a bunch of stuff - fixing most of
 it though it's not ideal.  Still pondering the right way to fix it.
 New: VM gen ID and hotplug for PXB.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYt7llAAoJECgfDbjSjVRp+r4H/1cmQ4F67H8oSOAT8xuAQFku
 OdHoVRJMWf7CRvZ7JqVke/a877d+h6ZpfW5dZQ7hp7O7rkPiuPHa5PVb0WGwDqrD
 scSOIvDPxJm19pnfZoF4zx+Ov45W5ahF+gwwm/sJU232ApLqOmAjs0FUxidkadQE
 f5Jrjs20WO2Vkkcd3U7Zl31myre0V7AbwIm7dB/8B+dpL6bJcxSvlM4krwLdBY6S
 lLs9V6ypRzjUxS3MDANL75KNrO/zys55J+Pa4sEh4+H0OX71v9Icl3s1zaM8J/EN
 VPjdqhDvJuEahc50FbJyRZQGIzOZ6PcGMsKUHKlxoVmDYZ6Pv5lOnpaLZRT6HMk=
 =ITdO
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pc: fixes, features

virtio support for region caches broke a bunch of stuff - fixing most of
it though it's not ideal.  Still pondering the right way to fix it.
New: VM gen ID and hotplug for PXB.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 02 Mar 2017 06:19:17 GMT
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  hw/pxb-pcie: fix PCI Express hotplug support
  tests/acpi: update DSDT after last patch
  acpi: simplify _OSC
  virtio: unbreak virtio-pci with IOMMU after caching ring translations
  virtio: add missing region cache init in virtio_load()
  virtio: invalidate memory in vring_set_avail_event()
  virtio: guard vring access when setting notification
  virtio: check for vring setup in virtio_queue_empty
  MAINTAINERS: Add VM Generation ID entries
  tests: Move reusable ACPI code into a utility file
  qmp/hmp: add query-vm-generation-id and 'info vm-generation-id' commands
  ACPI: Add Virtual Machine Generation ID support
  ACPI: Add vmgenid blob storage to the build tables
  docs: VM Generation ID device description
  linker-loader: Add new 'write pointer' command

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-03-03 10:09:03 +00:00
Igor Mammedov 39164c136c qmp/hmp: add query-vm-generation-id and 'info vm-generation-id' commands
Add commands to query Virtual Machine Generation ID counter.

QMP command example:
    { "execute": "query-vm-generation-id" }

HMP command example:
    info vm-generation-id

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Ben Warren <ben@skyportsystems.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-02 07:14:27 +02:00
Ashijeet Acharya 7562f90707 migrate: Introduce a 'dc->vmsd' check to avoid segfault for --only-migratable
Commit a3a3d8c7 introduced a segfault bug while checking for
'dc->vmsd->unmigratable' which caused QEMU to crash when trying to add
devices which do no set their 'dc->vmsd' yet while initialization.
Place a 'dc->vmsd' check prior to it so that we do not segfault for
such devices.

NOTE: This doesn't compromise the functioning of --only-migratable
option as all the unmigratable devices do set their 'dc->vmsd'.

Introduce a new function check_migratable() and move the
only_migratable check inside it, also use stubs to avoid user-mode qemu
build failures.

Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1487009088-23891-1-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-28 11:30:22 +00:00
Paolo Bonzini c2b38b277a block: move AioContext, QEMUTimer, main-loop to libqemuutil
AioContext is fairly self contained, the only dependency is QEMUTimer but
that in turn doesn't need anything else.  So move them out of block-obj-y
to avoid introducing a dependency from io/ to block-obj-y.

main-loop and its dependency iohandler also need to be moved, because
later in this series io/ will call iohandler_get_aio_context.

[Changed copyright "the QEMU team" to "other QEMU contributors" as
suggested by Daniel Berrange and agreed by Paolo.
--Stefan]

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213135235.12274-2-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-02-21 11:14:07 +00:00
Dr. David Alan Gilbert bc5c4f2196 vmstate_register_with_alias_id: Take an Error **
I'll be adding an error to it in a subsequent patch.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170202125956.21942-2-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-02-06 13:36:49 +01:00
Marc-André Lureau 0ec7b3e7f2 char: rename CharDriverState Chardev
Pick a uniform chardev type name.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27 18:07:59 +01:00
Ashijeet Acharya fe44dc9180 migration: disallow migrate_add_blocker during migration
If a migration is already in progress and somebody attempts
to add a migration blocker, this should rightly fail.

Add an errp parameter and a retcode return value to migrate_add_blocker.

Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-5-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Merged with recent 'Allow invtsc migration' change
2017-01-24 18:00:30 +00:00
Igor Mammedov 80e5db303d machine: Make possible_cpu_arch_ids() return const pointer
make sure that external callers won't try to modify
possible_cpus and owner of possible_cpus can access
it directly when it modifies it.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1484759609-264075-5-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-01-23 21:25:37 -02:00
Paolo Bonzini d525ffabab stubs: remove stubs/kvm.c
This has a single function, just move it to the other target/*/kvm.c files.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Paolo Bonzini a15215f3e1 build: remove --enable-colo/--disable-colo
No need to provide this knob, so remove it and stubs/migration-colo.c.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Paolo Bonzini d6da1e9eca event_notifier: cleanups around event_notifier_set_handler
Remove the useless is_external argument.  Since the iohandler
AioContext is never used for block devices, aio_disable_external
is never called on it.  This lets us remove stubs/iohandler.c.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Paolo Bonzini a0f80010b3 stubs: move vhost stubs to stubs/vhost.o
No need to include them in libqemustub.a, since only system emulators
need them.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Paolo Bonzini 858d436665 stubs: group all monitor_fdset_* functions in a single file
It makes little sense to implement only one of them, so avoid
proliferation of stubs files.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Paolo Bonzini 5564edb19e stubs: group stubs for user-mode emulation
Some stubs are used for user-mode emulation only; they are not
needed by tools.  Move them out of stubs/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Paolo Bonzini 2f7b92a03f hw: move reset handlers from vl.c to hw/core
They are small, it is not worth stubbing them.  Just include them
in user-mode emulators and unit tests as well.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Paolo Bonzini 671ab4368a stubs: remove unused stub for serial_hd
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Paolo Bonzini 6a997d3b76 stubs: move acpi stubs to hw/acpi
No need to include them in libqemustub.a, since only system emulators
need them.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Paolo Bonzini cc7a73604a stubs: move smbios stubs to hw/smbios
No need to include them in libqemustub.a, since only system emulators
need them.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Paolo Bonzini 869e9aecbe stubs: merge all monitor stubs in one file, remove monitor_cur_is_qmp stub
monitor_cur_is_qmp was previously used by other stubs, but it's not
since 397d30e ("qemu-error: remove dependency of stubs on monitor",
2016-11-01).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Stefan Hajnoczi f6a51c84cd aio: add AioPollFn and io_poll() interface
The new AioPollFn io_poll() argument to aio_set_fd_handler() and
aio_set_event_handler() is used in the next patch.

Keep this code change separate due to the number of files it touches.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20161201192652.9509-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03 16:38:48 +00:00
Paolo Bonzini 28017e010d tests: send error_report to test log
Implement error_vprintf to send the output of error_report to
the test log.  This silences test-vmstate.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477326663-67817-3-git-send-email-pbonzini@redhat.com>
2016-11-01 16:06:57 +01:00
Paolo Bonzini 397d30e940 qemu-error: remove dependency of stubs on monitor
Leave the implementation of error_vprintf and error_vprintf_unless_qmp
(the latter now trivially wrapped by error_printf_unless_qmp) to
libqemustub.a and monitor.c.  This has two advantages: it lets us
remove the monitor_printf and monitor_vprintf stubs, and it lets
tests provide a different implementation of the functions that uses
g_test_message.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477326663-67817-2-git-send-email-pbonzini@redhat.com>
2016-11-01 16:06:57 +01:00
Peter Maydell eab9e9629c Migration bits from the COLO project
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQItBAABCAAXBQJYFc37EBxhbWl0QGtlcm5lbC5vcmcACgkQ6wtN/GV+9nDdqQ/9
 H+di+q/zF6aOEuXRCN0ud9R81fZ7nLve3e9EbKCNZXnxN3M3+zQj0At+e/SBEoTc
 rRwqJmNlRX3TWViWsAYmddgtopZ9R9DWwW/VsKjS2Ng230YShrA/o20hu2dJkwl3
 CN4vAObzc/gxM59NWUlMnTXOG+Z9fI1NlEf0vZ2484a59KPVIE7W1zZccT1F8MNq
 sfa3RlOGBchNO2Rfzrr6cFGGH7UTfWiftPs7EDOfN/YBcpld6V4DfPWdPP8r2DSX
 gG7D3DJuuqPxZCjl0Nm1OjaIunYfVrRpMPMeNyo1+kTVbvvhDPFjah/MSWu8XJ2c
 N5lSqikIAWfMbQVW9gDpQ0495eRQTWA7VIlCbwN6mqNxyBvQMA+licFq6UFFrCMp
 quC3gO+daz3fKvUhi23TpebbqKLHA5OZA5ZvkjGDgkKPMCJyQRBZHLb81t5xsulZ
 cXuzAOeRcXK9aEJvcrDgWwxzi3PN8zg74RF1ZV8gxM4DkHKohlsnbgshWqGkFh3M
 +S5tEPqVlOlDO9juf6rlwNnVbWhFDFEGMKjI9XMTWwVWTREbqyP86fP66h2C4qc6
 34yAHi5G2i43dxzHgpHC0MpU0XenO0EYdu+8Tcx35LSBSfkOeD7pU1DeZQgbI51m
 ZQSnLDJqv2HVdoZT7vaIjwuhtEl84xqelFdVg+cY7Gw=
 =sur7
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.8' into staging

Migration bits from the COLO project

# gpg: Signature made Sun 30 Oct 2016 10:39:55 GMT
# gpg:                using RSA key 0xEB0B4DFC657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg:                 aka "Amit Shah <amit@kernel.org>"
# gpg:                 aka "Amit Shah <amitshah@gmx.net>"
# Primary key fingerprint: 48CA 3722 5FE7 F4A8 B337  2735 1E9A 3B5F 8540 83B6
#      Subkey fingerprint: CC63 D332 AB8F 4617 4529  6534 EB0B 4DFC 657E F670

* remotes/amit-migration/tags/migration-for-2.8:
  MAINTAINERS: Add maintainer for COLO framework related files
  configure: Support enable/disable COLO feature
  docs: Add documentation for COLO feature
  COLO: Implement failover work for secondary VM
  COLO: Implement the process of failover for primary VM
  COLO: Introduce state to record failover process
  COLO: Add 'x-colo-lost-heartbeat' command to trigger failover
  COLO: Synchronize PVM's state to SVM periodically
  COLO: Add checkpoint-delay parameter for migrate-set-parameters
  COLO: Load VMState into QIOChannelBuffer before restore it
  COLO: Send PVM state to secondary side when do checkpoint
  COLO: Add a new RunState RUN_STATE_COLO
  COLO: Introduce checkpointing protocol
  COLO: Establish a new communicating path for COLO
  migration: Switch to COLO process after finishing loadvm
  migration: Enter into COLO mode after migration if COLO is enabled
  COLO: migrate COLO related info to secondary node
  migration: Introduce capability 'x-colo' to migration

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-31 13:06:38 +00:00
zhanghailiang d89e666e06 COLO: Add 'x-colo-lost-heartbeat' command to trigger failover
We leave users to choose whatever heartbeat solution they want,
if the heartbeat is lost, or other errors they detect, they can use
experimental command 'x_colo_lost_heartbeat' to tell COLO to do failover,
COLO will do operations accordingly.

For example, if the command is sent to the Primary side,
the Primary side will exit COLO mode, does cleanup work,
and then, PVM will take over the service work. If sent to the Secondary side,
the Secondary side will run failover work, then takes over PVM's service work.

Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
zhanghailiang 25d0c16f62 migration: Switch to COLO process after finishing loadvm
Switch from normal migration loadvm process into COLO checkpoint process if
COLO mode is enabled.

We add three new members to struct MigrationIncomingState,
'have_colo_incoming_thread' and 'colo_incoming_thread' record the COLO
related thread for secondary VM, 'migration_incoming_co' records the
original migration incoming coroutine.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
zhanghailiang 0b827d5e72 migration: Enter into COLO mode after migration if COLO is enabled
Add a new migration state: MIGRATION_STATUS_COLO. Migration source side
enters this state after the first live migration successfully finished
if COLO is enabled by command 'migrate_set_capability x-colo on'.

We reuse migration thread, so the process of checkpointing will be handled
in migration thread.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
zhanghailiang 35a6ed4f71 migration: Introduce capability 'x-colo' to migration
We add helper function colo_supported() to indicate whether
colo is supported or not, with which we use to control whether or not
showing 'x-colo' string to users, they can use qmp command
'query-migrate-capabilities' or hmp command 'info migrate_capabilities'
to learn if colo is supported.

The default value for COLO (COarse-Grain LOck Stepping) is disabled.

Cc: Juan Quintela <quintela@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-30 15:17:39 +05:30
Paolo Bonzini e437016511 aio: introduce qemu_get_current_aio_context
This will be used by BDRV_POLL_WHILE (and thus by bdrv_drain)
to choose how to wait for I/O completion.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-12-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
2016-10-28 21:50:18 +08:00
Paolo Bonzini 24b9462544 tests: cleanup ptimer-test
1) ptimer-test is not a qtest---it runs the ptimer.c code directly in the
ptimer-test process

2) ptimer-test has its own stubs file, so there is no need to add more
stubs to stubs/vmstate.c

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17 19:22:17 +01:00
Daniel P. Berrange 9397740244 trace: remove global 'uint16 dstate[]' array
Instead of having a global dstate array, declare a single
'uint16 TRACE_${EVENT_NAME}_DSTATE' variable for each
trace event. Record a pointer to this variable in the
TraceEvent struct too.

By turning trace_event_get_state_dynamic_by_id into a
macro, this still hits the fast path, and cache affinity
is ensured by declaring all the uint16 vars adjacent to
each other.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-7-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12 09:35:54 +02:00
Peter Maydell cc9a366d3b -----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJX7DaFAAoJEJykq7OBq3PIdcYIAKpvDtiEcYy2pTtSOnO52gLQ
 VskTdh+aqvR7gkdb6SIfvDfL/wbquVNml9NtMhOC8YcT220Xepq28Yj2nDSLPvMi
 54Ing4/cGP67cTN5tTGLzUd52KYrf7HJd9npFOehE3b1yhteCJentPjRy47bfWa1
 voKx3sISBzmXBDxArW5eZcyEs5sWNriYOapHMXQB0eYkBTS6Q6qgBFYTKzb7CMXd
 GhtUIflDxxFwzUnYvH5tv+HLfq7O7TPXNjb+gQty8xzmhT+lJhiRr9dpTSRa6atu
 zRIcGUWbuTjkdZWcjWSTOTfxxZ2CvYlOnHC34H7FbtERBOPwjJ1vh+q1wvB9Mhw=
 =Q8Nu
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging

# gpg: Signature made Wed 28 Sep 2016 22:30:45 BST
# gpg:                using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35  775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha/tags/tracing-pull-request:
  trace: Document the execution mode of guest events
  trace: Add event "guest_cpu_reset"
  trace: Add event "guest_cpu_enter"
  trace: Properly initialize dynamic event states in hot-plugged vCPUs
  trace: move hw/virtio/virtio-balloon.c trace points into correct file
  trace: move hw/mem/pc-dimm.c trace points into correct file
  trace: move util/qemu-coroutine*.c trace points into correct file
  trace: move util/buffer.c trace points into correct file

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-29 00:34:20 +01:00
Lluís Vilanova 2bfe11c8fa trace: Properly initialize dynamic event states in hot-plugged vCPUs
Every time a vCPU is hot-plugged, it will "inherit" its tracing state
from the global state array. That is, if *any* existing vCPU has an
event enabled, new vCPUs will have too.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 147428970768.15111.7664565956870423529.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-28 19:17:55 +01:00
Pavel Dovgalyuk 6d0ceb80ff replay: allow replay stopping and restarting
This patch fixes bug with stopping and restarting replay
through monitor.

Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160926080815.6992.71818.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-27 11:57:30 +02:00
Peter Maydell 4c892756fd -----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
 
 iQEcBAABCAAGBQJX5LZ0AAoJEMo1YkxqkXHGmgAIAKeDTKx0sA76ewIvH9fKdmUu
 NNatJw59XnVX8lpfOU5yISkJ4BD6oBdN7tbWaOW8yzcAeYu1Ff5iUu4LBEUFb7eW
 g6zqUCV58XjaCTLmTiAfa19Exfnh6pXZlZMRP4Hr3vUVSCHFmC0EyTEllfHxU/jW
 aPHtAEge/p6EDAHygHJBTSQzsaXRdyJNyt/AKPreDtblNRT8VgapCDzZQPcCVGH1
 F9grWVu0B/VVDS0mfgSRhT0UeF/vtiikuRW92sC4woVVB+brJyG4VwGT8oeUN8RU
 30/tGo5p9fpqef3iP669uUrloLfmWcKcIJuPfQ4ZUlZh8kIV+lWK9kZuTVgocGw=
 =xLJw
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/famz/tags/various-pull-request' into staging

# gpg: Signature made Fri 23 Sep 2016 05:58:28 BST
# gpg:                using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021  AD56 CA35 624C 6A91 71C6

* remotes/famz/tags/various-pull-request: (23 commits)
  docker: exec $CMD
  docker: Terminate instances at SIGTERM and SIGHUP
  docker: Support showing environment information
  docker: Print used options before doing configure
  docker: Flatten default target list in test-quick
  docker: Update fedora image to latest
  docker: Generate /packages.txt in ubuntu image
  docker: Generate /packages.txt in fedora image
  docker: Generate /packages.txt in centos6 image
  tests: Ignore test-uuid
  Add UUID files to MAINTAINERS
  tests: Add uuid tests
  uuid: Tighten uuid parse
  vl: Switch qemu_uuid to QemuUUID
  configure: Remove detection code for UUID
  tests: No longer dependent on CONFIG_UUID
  crypto: Switch to QEMU UUID API
  vpc: Use QEMU UUID API
  vdi: Use QEMU UUID API
  vhdx: Use QEMU UUID API
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	tests/Makefile.include
2016-09-23 13:10:43 +01:00
Fam Zheng cea25275a3 util: Add UUID API
A number of different places across the code base use CONFIG_UUID. Some
of them are soft dependency, some are not built if libuuid is not
available, some come with dummy fallback, some throws runtime error.

It is hard to maintain, and hard to reason for users.

Since UUID is a simple standard with only a small number of operations,
it is cleaner to have a central support in libqemuutil. This patch adds
qemu_uuid_* functions that all uuid users in the code base can
rely on. Except for qemu_uuid_generate which is new code, all other
functions are just copy from existing fallbacks from other files.

Note that qemu_uuid_parse is moved without updating the function
signature to use QemuUUID, to keep this patch simple.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-2-git-send-email-famz@redhat.com>
2016-09-23 11:42:52 +08:00
Dmitry Osipenko 5b262bb697 tests: Add ptimer tests
Ptimer is a generic countdown timer helper that is used by many timer
device models as well as by the QEMU core. Add QTests for the ptimer.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 1de89fe6e1ccaf6c8071ee3469e1a844df948359.1473252818.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:07 +01:00
Peter Maydell f9ae6bcf1d First (big) chunk of s390x updates:
- cpumodel support for s390x
 - various fixes and improvements
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXztxBAAoJEN7Pa5PG8C+vMScP/3AjIhWHy1h5iTZhjAOz+vIX
 1JzCj3/vWf+1JxEYbKO7ySLXG4KbwMPHyWfGvlEyeYpt+ICXE9V0wXU1+t/y7SCr
 zTDVBjpWJlVm26/Dix2Ejvk5Dqe1E485GSnxfQfFTglafaZqt2cQ4sSOL+M3VChZ
 MJtFpDRils4QOqxk3RrHAv+L7D0mKgBIDutSpojkY/B9z7pGr/lZVpgjam4wB+6S
 f2KmzKJ1u0U00f1dE5BN/wf5cd1pr+N3FyXshKxZOZ4v9AfYolZ9tcruqHmgXWYS
 Z708D4SgoOshmEzztzmjyoDgaOUxpOiA2NUuOS4PlElJMKob/8b1+XDVxv9qfC5p
 NRSmmzne9UdsEHy6fz+/URJgM+qf9IadcusL94ocbtYLfEYUFaQ5ja81qQ1NM0Uo
 TLuRknFknc0cotq1+UVQsfyOPyKEypt2XNPkPpgV15+XZG1WlElCTZfMPOuP7zYU
 YG3FBDqBj4JidkEYpg/w+ARH6fzaRAOISLclJFgFa4poyutbbr88AF1NzHmMyjDM
 Kvj7NFRfhBgm+vGs4s9ZNgGGfxaHBdzd5xV1u+xYaeW25VCFlOGk/7d5jXDCvnvm
 Juv8SMai3fgFfEis5eZmZEz3Sq1Zja3jCqq0tJmFkJMC3tmFniDzh+9KQso2mMZo
 ezRdgCkmdOm/OyVwhNy6
 =hiH2
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20160906-v2' into staging

First (big) chunk of s390x updates:
- cpumodel support for s390x
- various fixes and improvements

# gpg: Signature made Tue 06 Sep 2016 16:09:53 BST
# gpg:                using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20160906-v2: (38 commits)
  s390x/cpumodel: implement QMP interface "query-cpu-model-baseline"
  s390x/cpumodel: implement QMP interface "query-cpu-model-comparison"
  s390x/cpumodel: implement QMP interface "query-cpu-model-expansion"
  qmp: add QMP interface "query-cpu-model-baseline"
  qmp: add QMP interface "query-cpu-model-comparison"
  qmp: add QMP interface "query-cpu-model-expansion"
  s390x/kvm: don't enable key wrapping if msa3 is disabled
  s390x/kvm: let the CPU model control CMM(A)
  s390x/kvm: disable host model for problematic compat machines
  s390x/kvm: implement CPU model support
  s390x/kvm: allow runtime-instrumentation for "none" machine
  s390x/sclp: propagate hmfai
  s390x/sclp: propagate the mha via sclp
  s390x/sclp: propagate the ibc val (lowest and unblocked ibc)
  s390x/sclp: indicate sclp features
  s390x/sclp: introduce sclp feature blocks
  s390x/sclp: factor out preparation of cpu entries
  s390x/cpumodel: check and apply the CPU model
  s390x/cpumodel: let the CPU model handle feature checks
  s390x/cpumodel: expose features and feature groups as properties
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-06 16:17:19 +01:00
David Hildenbrand b18b604334 qmp: add QMP interface "query-cpu-model-baseline"
Let's provide a standardized interface to baseline two CPU models, to
create a third, compatible one. This is especially helpful when two
CPU models are not identical, but a CPU model is required that is
guaranteed to run under both configurations, where the original models run.

"query-cpu-model-baseline" takes two CPU models and returns a third,
compatible model. The result will always be a static CPU model.

Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-28-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06 17:06:51 +02:00
David Hildenbrand 0031e0d683 qmp: add QMP interface "query-cpu-model-comparison"
Let's provide a standardized interface to compare two CPU models.
"query-cpu-model-compare" takes two models and returns  how they compare
in a specific configuration.

The result will give guarantees about runnability. E.g. if a CPU model A
is a subset of CPU model B, model A is guaranteed to run in configurations
where model B runs, but not the other way around (might or might not run).

Usually, CPU features or CPU generations are used to calculate the result.
If a model is not guaranteed to run in a certain environment (e.g.
incompatible), a  compatible one can be created by "baselining" both models
(follow up patch).

Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-27-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06 17:06:51 +02:00
David Hildenbrand e09484efbc qmp: add QMP interface "query-cpu-model-expansion"
Let's provide a standardized interface to expand CPU models. This interface
can be used by tooling to get details about a specific CPU model in a
certain configuration, e.g. about the "host" model.

To take care of all architectures, two detail levels for an expansion
are introduced. Certain architectures might not support all detail levels.
While "full" will expand and indicate all relevant properties/features
of a CPU model, "static" expands to a static base CPU model, that will
never change between QEMU versions and therefore have the same features
when used under different compatibility machines.

Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-26-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06 17:06:51 +02:00
Lluís Vilanova 8eb1b9db55 trace: Avoid implicit bool->integer conversions
An explicit if/else is clearer than arithmetic assuming #true is 1,
while the compiler should be able to generate just as optimal code.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 147194273830.26836.5875729707953474838.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-05 13:47:02 -04:00