This modifies _cleanup_test_img to remove all the extent files listed by
"qemu-img info"'s format specific information.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce _unsupported_imgopts that causes _notrun for specific image
options.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This case can't run when IMGPROTO=nbd, since it needs to create some
internal snapshot which would fail for EOF write request, even when
TEST_IMG is exported with "-f raw" in common.rc, so set _supported_proto
to file.
_require_command() is changed to tip what util is missing, instead
of printing a blank.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This replaces _unsupported_qemu_io_options and check for support of
current cache mode, and allow to provide a default if user didn't
specify.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The non-global option output is suppresed in _make_test_img() for
output verification in the 0?? tests. This adds suppression for
the vhdx-unique options as well. This allows check -vhdx to run
successfully.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
_make_test_img() currently works with spaced pathnames only when not
specifying a backing file. This fixes it so that the backing file
argument is properly quoted.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds the VHDX format to the qemu-iotests format, and adds
a read test. The test reads from an existing sample image, that
was created with Hyper-V under Windwos Server 2012.
The image file is a 1GB dynamic image, with 32MB blocks.
The pattern 0xa5 exists from 0MB-33MB (past a block size boundary)
The pattern 0x96 exists from 33MB-66MB (past another block boundary,
and leaving a partial blank block)
From 66MB-1024MB, all reads should return 0.
Although 1GB dynamic image with 66MB of data, the bzip2'ed image
file size is only 874 bytes.
This also adds in the IMGFMT_GENERIC flag, so r/o images can be
tested (e.g. ./check -vhdx) without failing tests that assume
r/w support.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In _img_info, filter out additional information specific to the image
format provided by qemu-img info, since tests designed for multiple
image formats would produce different outputs for every image format
otherwise.
In a human-readable dump, that new information will always be last for
each "image information block" (multiple blocks are emitted when
inspecting the backing file chain). Every block is separated by an empty
line. Therefore, in this case, everything starting with the line "Format
specific information:" up to that empty line (or EOF, if it is the last
block) has to be stripped.
The JSON dump will always emit pretty JSON data. Therefore, the opening
and closing braces of every object will be on lines which are indented
by exactly the same amount, and all lines in between will have more
indentation. Thus, in this case, everything starting with a line
matching the regular expression /^ *"format-specific": {/ until /^ *},?/
has to be stripped, where the number of spaces at the beginning of the
respective lines is equal.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A lot of image filename and paths are used unquoted. Quote these to
make sure that directories / filenames with spaces are not problematic.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For image formats that are not "QEMU native", but supported for
compatibility, it is useful to verify that an image created with
the 'gold standard' native tool can be read / written to successfully
by QEMU.
In addition to testing non-native images, this could also be useful to
test against image files created by older versions of QEMU.
This provides a directory to store small sample images, for use by
scripts in tests/qemu-iotests.
Image files should be compressed with bzip2.
To use a sample image from a bash script, the _use_sample_img function
will copy and decompress the image into $TEST_DIR, and set $TEST_IMG to
be the decompressed sample image copy. To cleanup, call
_cleanup_test_img as normal.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When opening/creating images, propagating errors instead of immediately
emitting them on occurrence results in errors generally being printed on
a single line rather than being split up into multiple ones. This in
turn requires adjustments to some test results.
Also, test 060 used a sed to filter out the test image directory and
format by removing everything from the affected line after a certain
keyword; this now also removes the error message itself, which can be
fixed by using _filter_testdir and _filter_imgfmt.
Finally, _make_test_img in common.rc did not filter out the test image
directory etc. from stderr. This has been fixed through a redirection of
stderr to stdout (which is already done in _check_test_img and
_img_info).
Signed-off-by: Max Reitz <mreitz@redhat.com>
These scripts used to have a four characters indentation, with eight
consecutive spaces converted into a tab. Convert everything into spaces.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The new poke_file function sets bytes at an offset in a file given a
printf-style format string. It can be used to corrupt an image file for
test coverage of error paths.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Filter out vmdk creation option 'adapter_type' for vmdk. So that tests
with an explicit './check -o adapter_type=XXX' will not fail.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Cover new image creation options for vmdk, so we can use '-o
zeroed_grain=XXX' and '-o subformat=XXX' to run the tests successfully.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Note in order to run these tests on ssh, you must be running a local
ssh daemon, and that daemon must accept loopback connections, and
ssh-agent has to be set up to allow logins on the local daemon. In
other words, the following command should just work without demanding
any passphrase:
ssh localhost
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Show how many clusters are compressed. This can be used to monitor how
many compressed clusters remain and whether to recompress the image.
Suggested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds the support for reporting the image end offset (in
bytes). This is particularly useful after a conversion (or a rebase)
where the destination is a block device in order to find the first
unused byte at the end of the image.
Signed-off-by: Federico Simoncelli <fsimonce@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To do this, we start a qemu-nbd process at _make_test_img and kill
it in _cleanup_test_img. $TEST_IMG is changed to point at the TCP
server. We also remove the checks for existence of binaries from
common.config - they're duplicated in common, and we can make the
qemu-nbd check conditional on $IMGPROTO being "nbd" if we do it there.
Signed-off-by: Nick Thomas <nick@bytemark.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new test verifies that qemu-img info --backing-chain safely aborts
when an image file has a backing file infinite loop.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the qemu-io --nocache option is used the 039 test case cannot abort
QEMU at a point where the image is dirty. Skip the test case.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of building a huge pipeline, just pass all expressions to a
single sed process.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests already filters out image creation options that may be
present or not in order to get the same output in both cases. However,
often it only considers the default value of the option. Cover all valid
values instead so that ./check -o name=value can be used successfull for
all of them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Hide the default lazy_refcounts=off output from qemu-img like we do with
other image creation options. This ensures that existing golden outputs
continue to pass despite the new option that has been added.
Note that this patch applies before the one that actually introduces the
lazy_refcounts=on|off option. This ensures git-bisect(1) continues to
work.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
check -valgrind wraps all qemu-io calls with valgrind. This makes it a
bit easier to debug problems that occur somewhere deep in a test case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
We added image fragmentation statistics functions to qemu-img several days
ago, those patches will cause "./check -qed" failed. This patch will ignore
fragmentation statistics information of qed format, and then "./check -qed"
will work.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds an -o option to qemu-iotests, which is an option string that
is passed through to qemu-img create -o... This allows testing different
subformat with a command like './check -qcow2 -o compat=0.10'.
For qcow2, if no compat option is specified, compat=1.1 is the new
default.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some image formats do have a cluster size, others don't, but there are
tests that work with both sets of images and currently we get failures
because the qemu-img create output doesn't mention the cluster size for
some formats.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-img requires first options, then file name, then size.
GNU getopt also allows options at the end, but POSIX getopt
doesn't. Try "export POSIXLY_CORRECT=y" to get the POSIX
behaviour with GNU getopt, too.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Until recently, qemu-img create displayed cluster_size=0 for the default
cluster size. It is changed to display the real cluster size now, which results
in the cluster size not being filtered out any more.
If the cluster size is specified explicitly in CLUSTER_SIZE, keep the output,
and if using the default, filter it out. This mostly restores the old behaviour
of the test cases; test 015 must be fixed to use CLUSTER_SIZE instead of using
extra_img_options for it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch introduces tests for protocols other than file, and
initially supports rbd and sheepdog.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The tests use bash language features like 'let', which aren't supported
by /bin/sh on systems that use a conservative shell like dash. This
patch changes the interpreter to /bin/bash.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Change the io_test and io_test2 functions to take the cluster size of the image
and the number of test requests to issue. Tests are changed to specify a
cluster size (usually 4k), but expected test results stay the same for now
(apart from qemu-img printing the cluster size now).
Based on a patch written by Christoph Hellwig.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
VDI supports an image option 'static'.
Ignore "static=off" from qemu-img output.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Blue Swirl notices that we were using the old FSF post address in the
license boilerplates. Replace both the old and new address with links
to the gnu.org licenses homepage as suggested by Ben Pfaff.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Pretend that a non-implemented check is always successful and thus allow
various tests that were qcow2-specific before to be generic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
