Commit Graph

29 Commits

Author SHA1 Message Date
Pavel Dovgalyuk 829600a519 hpet: recover timer offset correctly
HPET saves its state by calculating the current time and recovers timer
offset using this calculated value. But these calculations include
divisions and multiplications. Therefore the timer state cannot be recovered
precise enough.
This patch introduces saving of the original value of the offset to
preserve the determinism of the timer.

Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Maria Klimushenkova <maria.klimushenkova@ispras.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>

--
v3: Added compat property for correct migration.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-12 13:22:02 +01:00
Dr. David Alan Gilbert 44b1ff319c migration: pre_save return int
Modify the pre_save method on VMStateDescription to return an int
rather than void so that it potentially can fail.

Changed zillions of devices to make them return 0; the only
case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already
had an error_report/return case.

Note: If you add an error exit in your pre_save you must emit
an error_report to say why.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170925112917.21340-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-09-27 11:35:59 +01:00
Bill Paul ecba19935a hw/timer: Revert "hpet: inverse polarity when pin above ISA_NUM_IRQS"
This reverts commit 0d63b2dd31.

This change was originally intended to correct the HPET behavior
in conjunction with Linux, however the behavior that it actually creates
is not compatible with the ioapic.c implementation; it used to be
compatible with KVM's own IOAPIC but it is not anymore.

Signed-off-by: Bill Paul <wpaul@windriver.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <201604051558.20070.wpaul@windriver.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-04-08 00:07:43 +02:00
Markus Armbruster da34e65cb4 include/qemu/osdep.h: Don't include qapi/error.h
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef.  Since then, we've moved to include qemu/osdep.h
everywhere.  Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h.  That's in excess of
100KiB of crap most .c files don't actually need.

Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h.  Include qapi/error.h in .c files that need it and don't
get it now.  Include qapi-types.h in qom/object.h for uint16List.

Update scripts/clean-includes accordingly.  Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h.  Update the list of includes in the qemu/osdep.h
comment quoted above similarly.

This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third.  Unfortunately, the number depending on
qapi-types.h shrinks only a little.  More work is needed for that one.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:15 +01:00
Peter Maydell b6a0aa0537 x86: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:22 +00:00
Igor Mammedov a57d708d17 pc: acpi: move HPET from DSDT to SSDT
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09 23:20:18 +02:00
Peter Maydell d17008bc29 hw/timer/hpet.c: Avoid signed integer overflow which results in bugs on OSX
Signed integer overflow in C is undefined behaviour, and the compiler
is at liberty to assume it can never happen and optimize accordingly.
In particular, the subtractions in hpet_time_after() and hpet_time_after64()
were causing OSX clang to optimize the code such that it was prone to
hangs and complaints about the main loop stalling (presumably because
we were spending all our time trying to service very high frequency
HPET timer callbacks). The clang sanitizer confirms the UB:

hw/timer/hpet.c:119:26: runtime error: signed integer overflow: -2146967296 - 2147003978 cannot be represented in type 'int'

Fix this by doing the subtraction as an unsigned operation and then
converting to signed for the comparison.

Reported-by: Aaron Elkins <threcius@yahoo.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1447080991-24995-1-git-send-email-peter.maydell@linaro.org
2015-11-09 15:48:21 +00:00
Laurent Vivier 0a4f9240f5 hpet: remove muldiv64()
hpet defines a clock period in femtoseconds but
then converts it to nanoseconds to use the internal
timers.

We can define the period in nanoseconds and use it
directly, this allows to remove muldiv64().

We only need to convert the period to femtoseconds
to put it in internal hpet capability register.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25 14:56:05 +02:00
Markus Armbruster d49b683644 qerror: Move #include out of qerror.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22 18:20:40 +02:00
Juan Quintela 5cd8cadae8 migration: Use normal VMStateDescriptions for Subsections
We create optional sections with this patch.  But we already have
optional subsections.  Instead of having two mechanism that do the
same, we can just generalize it.

For subsections we just change:

- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
  it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
  VMStateDescription

Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-12 06:53:57 +02:00
Peter Maydell 42874d3a8c Switch non-CPU callers from ld/st*_phys to address_space_ld/st*
Switch all the uses of ld/st*_phys to address_space_ld/st*,
except for those cases where the address space is the CPU's
(ie cs->as). This was done with the following script which
generates a Coccinelle patch.

A few over-80-columns lines in the result were rewrapped by
hand where Coccinelle failed to do the wrapping automatically,
as well as one location where it didn't put a line-continuation
'\' when wrapping lines on a change made to a match inside
a macro definition.

===begin===
#!/bin/sh -e
# Usage:
# ./ldst-phys.spatch.sh > ldst-phys.spatch
# spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/        /g' > out.patch
# patch -p1 < out.patch

for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do
cat <<EOF
@ cpu_matches_ld_${FN} @
expression E1,E2;
identifier as;
@@

ld${FN}_phys(E1->as,E2)

@ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @
expression E1,E2;
@@

-ld${FN}_phys(E1,E2)
+address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL)

EOF

done

for FN in b w_le w_be l_le l_be q_le q_be w l q; do
cat <<EOF
@ cpu_matches_st_${FN} @
expression E1,E2,E3;
identifier as;
@@

st${FN}_phys(E1->as,E2,E3)

@ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @
expression E1,E2,E3;
@@

-st${FN}_phys(E1,E2,E3)
+address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL)

EOF

done
===endit===

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2015-04-26 16:49:24 +01:00
Paolo Bonzini e720677e32 vmstate: accept QEMUTimer in VMSTATE_TIMER*, add VMSTATE_TIMER_PTR*
Old users of VMSTATE_TIMER* are mechanically changed to VMSTATE_TIMER_PTR
variants.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-26 12:22:44 +01:00
Stefan Hajnoczi 97c61fb78a hpet: increase spelling precision
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-12-11 20:57:11 +03:00
Juan Quintela d49805aeea savevm: Remove all the unneeded version_minimum_id_old (x86)
After previous Peter patch, they are redundant.  This way we don't
assign them except when needed.  Once there, there were lots of case
where the ".fields" indentation was wrong:

     .fields = (VMStateField []) {
and
     .fields =      (VMStateField []) {

Change all the combinations to:

     .fields = (VMStateField[]){

The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-16 04:55:26 +02:00
Michael S. Tsirkin 3f1c49e213 hpet: fix buffer overrun on invalid state load
CVE-2013-4527 hw/timer/hpet.c buffer overrun

hpet is a VARRAY with a uint8 size but static array of 32

To fix, make sure num_timers is valid using VMSTATE_VALID hook.

Reported-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-05-05 22:15:02 +02:00
Matt Lupfer c36ad13fe9 Don't enable a HPET timer if HPET is disabled
A HPET timer can be started when HPET is not yet
enabled. This will not generate an interrupt
to the guest, but causes problems when HPET is later
enabled.

A timer that is created and expires at least once before
HPET is enabled will have an initialized comparator based
on a hpet_offset of 0 (uninitialized). When HPET is
enabled, hpet_set_timer() is called a second time, which
modifies the timer expiry to a time based on the
difference between current ticks (measured with the
newly initialized hpet_offset) and the timer's
comparator (which was generated before hpet_offset was
initialized). This results in a long period of no HPET
timer ticks.

When this occurs with a CentOS 5.x guest, the guest
may not receive timer interrupts during its narrow
timer check window and panic on boot.

Signed-off-by: Matt Lupfer <mlupfer@ddn.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-27 17:48:11 +02:00
Edgar E. Iglesias ab1da85791 exec: Make stl_*_phys input an AddressSpace
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11 22:57:18 +10:00
Markus Armbruster 837d37167d sysbus: Set cannot_instantiate_with_device_add_yet
device_add plugs devices into suitable bus.  For "real" buses, that
actually connects the device.  For sysbus, the connections need to be
made separately, and device_add can't do that.  The device would be
left unconnected, and could not possibly work.

Quite a few, but not all sysbus devices already set
cannot_instantiate_with_device_add_yet in their class init function.

Set it in their abstract base's class init function
sysbus_device_class_init(), and remove the now redundant assignments
from device class init functions.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23 00:27:22 +01:00
Markus Armbruster efec3dd631 qdev: Replace no_user by cannot_instantiate_with_device_add_yet
In an ideal world, machines can be built by wiring devices together
with configuration, not code.  Unfortunately, that's not the world we
live in right now.  We still have quite a few devices that need to be
wired up by code.  If you try to device_add such a device, it'll fail
in sometimes mysterious ways.  If you're lucky, you get an
unmysterious immediate crash.

To protect users from such badness, DeviceClass member no_user used to
make device models unavailable with -device / device_add, but that
regressed in commit 18b6dad.  The device model is still omitted from
help, but is available anyway.

Attempts to fix the regression have been rejected with the argument
that the purpose of no_user isn't clear, and it's prone to misuse.

This commit clarifies no_user's purpose.  Anthony suggested to rename
it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which
I shorten somewhat to keep checkpatch happy.  While there, make it
bool.

Every use of cannot_instantiate_with_device_add_yet gets a FIXME
comment asking for rationale.  The next few commits will clean them
all up, either by providing a rationale, or by getting rid of the use.

With that done, the regression fix is hopefully acceptable.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-23 00:27:22 +01:00
Michael S. Tsirkin 142e0950cf hpet: fix build with CONFIG_HPET off
make hpet_find inline so we don't need
to build hpet.c to check if hpet is enabled.

Fixes link error with CONFIG_HPET off.

Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-11 20:11:10 +02:00
Liu Ping Fan 7a10ef51c2 hpet: enable to entitle more irq pins for hpet
Owning to some different hardware design, piix and q35 need
different compat. So making them diverge.

On q35, IRQ2/8 can be reserved for hpet timer 0/1. And pin 16~23
can be assigned to hpet as guest chooses. So we introduce intcap
property to do that.

Consider the compat and piix/q35, we finally have the following
value for intcap: For piix, hpet's intcap is hard coded as IRQ2.
For pc-q35-1.7 and earlier, we use IRQ2 for compat reason. Otherwise
IRQ2, IRQ8, and IRQ16~23 are allowed.

Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-11 20:11:09 +02:00
Liu Ping Fan 0d63b2dd31 hpet: inverse polarity when pin above ISA_NUM_IRQS
According to hpet spec, hpet irq is high active. But according to
ICH spec, there is inversion before the input of ioapic. So the OS
will expect low active on this IRQ line. (On bare metal, if OS driver
claims high active on this line, spurious irq is generated)

We fold the emulation of this inversion inside the hpet logic.

Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-11 20:11:08 +02:00
Michael S. Tsirkin 64e9df8d34 hpet: add API to find it
Add API to find HPET using QOM.

Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-10-14 17:48:52 +03:00
Alex Bligh bc72ad6754 aio / timers: Switch entire codebase to the new timer API
This is an autogenerated patch using scripts/switch-timer-api.

Switch the entire code base to using the new timer API.

Note this patch may introduce some line length issues.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Hu Tao 726887ef44 hpet: Use QOM realize for hpet
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[AF: Avoided SYS_BUS_DEVICE() in loop]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 00:37:35 +02:00
Hu Tao 02f9a6f5da hpet: QOM'ify some more
Introduce type constant, avoid FROM_SYSBUS().

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[AF: Renamed parent field and renamed variable]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23 00:37:35 +02:00
Paolo Bonzini 853dca1205 hw/t*: pass owner to memory_region_init* functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:48 +02:00
Paolo Bonzini 2c9b15cab1 memory: add owner argument to initialization functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:44 +02:00
Paolo Bonzini 49ab747f66 hw: move target-independent files to subdirectories
This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:12 +02:00