Otherwise there's no way to clear them without an external command,
and it could lock the OS in the VM if they were stuck.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Macro parameters should almost always have () around them when used.
llvm reported an error on this.
Remove redundant parenthesis and put parenthesis around the entire
macros with assignments in case they are used in an expression.
The macros were doing ((v) & 1) for a binary input, but that only works
if v == 0 or if v & 1. Changed to !!(v) so they work for all values.
Remove some unused macros.
Reported in https://bugs.launchpad.net/bugs/1651167
An audit of these changes found no semantic changes; this is just
cleanups for proper style and to avoid a compiler warning.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This lets an event be added to the SEL as if a sensor had generated
it. The OpenIPMI driver uses it for storing panic event information.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
According to the spec, from section "32.3 OEM SEL Record - Type
E0h-FFh", event types from 0x0e to 0xff do not have a timestamp.
So don't set it when adding those types. This required putting
the timestamp in a temporary buffer, since it's still required
to set the last addition time.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The minimum message size was on the wrong commands, for getting
the time it's zero and for setting the time it's 6.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
Some lines where then manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
link's check callback is supposed to verify/permit setting it,
however currently nothing restricts it from misusing it
and modifying target object from within.
Make sure that readonly semantics are checked by compiler
to prevent callback's misuse.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170714021509.23681-2-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
frontends should avoid accessing CharDriver struct where possible
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-6-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Frontends should have an interface to setup the handler of a backend change.
The interface will be used in the next commits
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-3-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move all the frontend struct and methods to a seperate unit. This avoids
accidentally mixing backend and frontend calls, and helps with readabilty.
Make qemu_chr_replay() a macro shared by both char and char-fe.
Export qemu_chr_write(), and use a macro for qemu_chr_write_all()
(nb: yes, CharBackend is for char frontend :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
So they are all in one place. The following patch will move serial &
parallel declarations to the respective headers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Time to wire up all the call sites that request a shutdown or
reset to use the enum added in the previous patch.
It would have been less churn to keep the common case with no
arguments as meaning guest-triggered, and only modified the
host-triggered code paths, via a wrapper function, but then we'd
still have to audit that I didn't miss any host-triggered spots;
changing the signature forces us to double-check that I correctly
categorized all callers.
Since command line options can change whether a guest reset request
causes an actual reset vs. a shutdown, it's easy to also add the
information to reset requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts]
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts]
Message-Id: <20170515214114.15442-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
It will be used to fill the message buffer with custom events expected
by some systems. Typically, an Open PowerNV platform guest is notified
with an OEM SEL message before a shutdown or a reboot.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch exposes a new IPMI routine to query a sdr entry from the
sdr table maintained by the IPMI BMC simulator. The API is very
similar to the internal sdr_find_entry() routine and should be used
the same way to query one or all sdrs.
A typical use would be to loop on the sdrs to build nodes of a device
tree.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch provides a simple FRU support for the BMC simulator. FRUs
are loaded from a file which name is specified in the object
properties, each entry having a fixed size, also specified in the
properties. If the file is unknown or not accessible for some reason,
a unique entry of 1024 bytes is created as a default. Just enough to
start some simulation.
These commands complies with the IPMI spec : "34. FRU Inventory Device
Commands".
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
[dwg: Folded in subsequent fix to handle NULL filename]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The IPMI BMC simulator populates the sdr/sensor tables with a minimal
set of entries (Watchdog). But some qemu platforms might want to use
extra entries for their custom needs.
This patch modifies slighty the initializing routine to take into
account a larger set read from a file. The name of the file to use is
defined through a new 'sdr' property of the simulator device.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Macro parameters should almost always have () around them when used.
llvm reported an error on this.
Remove redundant parenthesis and put parenthesis around the entire
macros with assignments in case they are used in an expression.
Remove some unused macros.
Reported in https://bugs.launchpad.net/bugs/1651167
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1490894892-8055-1-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The member VMStateField.start is used for two things, partial data
migration for VBUFFER data (basically provide migration for a
sub-buffer) and for locating next in QTAILQ.
The implementation of the VBUFFER feature is broken when VMSTATE_ALLOC
is used. This however goes unnoticed because actually partial migration
for VBUFFER is not used at all.
Let's consolidate the usage of VMStateField.start by removing support
for partial migration for VBUFFER.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170203175217.45562-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Qemu crash in the source side while migrating, after starting ipmi service inside vm.
./x86_64-softmmu/qemu-system-x86_64 --enable-kvm -smp 4 -m 4096 \
-drive file=/work/suse/suse11_sp3_64_vt,format=raw,if=none,id=drive-virtio-disk0,cache=none \
-device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,id=virtio-disk0 \
-vnc :99 -monitor vc -device ipmi-bmc-sim,id=bmc0 -device isa-ipmi-kcs,bmc=bmc0,ioport=0xca2
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7ffec4268700 (LWP 7657)]
__memcpy_ssse3_back () at ../sysdeps/x86_64/multiarch/memcpy-ssse3-back.S:2757
(gdb) bt
#0 __memcpy_ssse3_back () at ../sysdeps/x86_64/multiarch/memcpy-ssse3-back.S:2757
#1 0x00005555559ef775 in memcpy (__len=3, __src=0xc1421c, __dest=<optimized out>)
at /usr/include/bits/string3.h:51
#2 qemu_put_buffer (f=0x555557a97690, buf=0xc1421c <Address 0xc1421c out of bounds>, size=3)
at migration/qemu-file.c:346
#3 0x00005555559eef66 in vmstate_save_state (f=f@entry=0x555557a97690,
vmsd=0x555555f8a5a0 <vmstate_ISAIPMIKCSDevice>, opaque=0x555557231160,
vmdesc=vmdesc@entry=0x55555798cc40) at migration/vmstate.c:333
#4 0x00005555557cfe45 in vmstate_save (f=f@entry=0x555557a97690, se=se@entry=0x555557231de0,
vmdesc=vmdesc@entry=0x55555798cc40) at /mnt/sdb/zyy/qemu/migration/savevm.c:720
#5 0x00005555557d2be7 in qemu_savevm_state_complete_precopy (f=0x555557a97690,
iterable_only=iterable_only@entry=false) at /mnt/sdb/zyy/qemu/migration/savevm.c:1128
#6 0x00005555559ea102 in migration_completion (start_time=<synthetic pointer>,
old_vm_running=<synthetic pointer>, current_active_state=<optimized out>,
s=0x5555560eaa80 <current_migration.44078>) at migration/migration.c:1707
#7 migration_thread (opaque=0x5555560eaa80 <current_migration.44078>) at migration/migration.c:1855
#8 0x00007ffff3900dc5 in start_thread (arg=0x7ffec4268700) at pthread_create.c:308
#9 0x00007fffefc6c71d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: Zhuang Yanying <ann.zhuangyanying@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I misunderstood the workings of the power settings, the power off
is a force off operation and there needs to be a separate graceful
shutdown operation. So replace the force off operation with a
graceful shutdown.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The original commit:
commit 67aa56fc03
Author: Corey Minyard <cminyard@mvista.com>
Date: Thu Dec 17 12:50:06 2015 -0600
ipmi: Add an external connection simulation interface
defined a new variable CONFIG_IPMI_EXTERN, but then went
on to mistakely use the pre-existing CONFIG_IPMI_LOCAL
variable.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is allowed by the IPMI specification for graceful shutdown,
so implement it.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When issuing a chassis 'powerdown' control command, the routine
qemu_system_shutdown_request() should be used to exit the guest.
qemu_system_powerdown_request() will initiate a soft shutdown which is
not what is required by the IPMI (28.3 Chassis Control Command):
0h = power down. Force system into soft off (S4/S45) state. This
is for 'emergency' management power down actions. The command does
not initiate a clean shut-down of the operating system prior to
powering down the system
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Get rid of the unnecessary mutex, it was a vestige
of something else that was not done. That way we don't
have to free it.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No hotplug support, make sure it doesn't happen.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No need to keep explicit_fe_open around if it affects only a
qemu_chr_fe_set_handlers(). Use an additional argument instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This also switches from qemu_chr_add_handlers() to
qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now
takes the focus when fe_open (qemu_chr_add_handlers() did take the
focus)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Store the property in a CharBackend instead of CharDriverState*. This
also replace systematically chr by chr.chr to access the
CharDriverState*. The following patches will replace it with calls to
qemu_chr_fe CharBackend functions.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update all qemu_uuid users as well, especially get rid of the duplicated
low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API.
Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to
QemuUUID is done here too to keep everything in sync and avoid code
churn.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>
The continue_send() method in ipmi_bmc_extern.c directly
assigns the return value of qemu_chr_fe_write() to the
variable tracking the I/O buffer offset. This ignores the
possibility that the return value could be -1 and so will
cause I/O go backwards on EAGAIN. Fortunately 'outpos' is
unsigned, so can't go negative - it will become MAX_INT
which will cause the loop to stop, and avoid an accidental
out of bounds array access.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of scanning IPMI devices from a fwinfo list, allow
the fwinfo to be fetched from the IPMI interface class.
Then the code looking for IPMI fwinfo can scan devices on a
bus and look for ones that implement the IPMI class.
This will let the ACPI scope be defined by the calling
code so the IPMI code doesn't have to know the scope.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a couple of variables to manipulate the raw sdr
entries. The const attribute is also removed on init_sdrs. This will
ease the introduction of a sdr loader using a file.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, the code initializing the sdr table relies on an ending
record with a recid of 0xffff. This patch changes the loop to use the
sdr size as a breaking condition.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch moves the code section initializing the sdrs in its own
routine to prepare ground for changes in the subsequent patches.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be useful to define and use properties when the object is
instantiated.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The third byte in the response buffer of an IPMI command holds the
error code. In many IPMI command handlers, this byte is updated
directly. This patch adds a helper routine to clarify why this byte is
being used.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some IPMI command handlers in the BMC simulator use a macro
IPMI_CHECK_RESERVATION() to check a SDR reservation but the macro
implicitly uses local variables. This patch simply removes it.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The IPMI command handlers in the BMC simulator use a macro
IPMI_ADD_RSP_DATA() to push bytes in a response buffer. The macro
hides the fact that it implicitly uses variables local to the handler,
which is misleading.
This patch introduces a simple 'struct RspBuffer' and inlined helper
routines to store byte(s) in a response buffer. rsp_buffer_push()
replaces the macro IPMI_ADD_RSP_DATA() and rsp_buffer_pushmore() is
new helper to push multiple bytes. The latest is used in the command
handlers get_msg() and get_sdr() which are manipulating the buffer
directly.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Most IPMI command handlers in the BMC simulator start with a call to
the macro IPMI_CHECK_CMD_LEN() which verifies that a minimal number of
arguments expected by the command are indeed available. To achieve
this task, the macro implicitly uses local variables which is
misleading in the code.
This patch adds a 'cmd_len_min' attribute to the struct IPMICmdHandler
defining the minimal number of arguments expected by the command and
moves this check in the global command handler ipmi_sim_handle_command().
To clarify the checks being done on the received command, the patch
introduces a helper ipmi_get_handler().
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix a number of off-by-ones, one of them spotted by Coverity.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It was falling through when it should have been a break. Found by
Coverity. The logic could be simplified a bit with a fallthrough,
probably the original thought, but that would be less clear, I think.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Message-Id: <1452519152-6500-3-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Found by Paolo.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Message-Id: <1452519152-6500-2-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is not necessary and actually causes a hang; it was probably copied
and pasted from KVM code, that is one of the very few places that run
outside iothread lock.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
>From the specs (20.8 Get Device GUID Command), the command needs to
return a GUID (Globally Unique ID), or UUID, that should never change
over the lifetime of the device. qemu_uuid looked like a good
candidate to start with but we could use a specific BMC property also
if needed.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is a simulator. Just return an unknown cause (0).
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
