If offset_within_address_space falls in a page, then we register a
subpage. So check offset_within_address_space rather than
offset_within_region.
Cc: qemu-stable@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The problem is introduced by commit 2332616 (exec: Support 64-bit
operations in address_space_rw, 2013-07-08). Before that commit,
memory_access_size would only return 1/2/4.
Since alignment is already handled above, reduce l to the largest
power of two that is smaller than l.
Cc: qemu-stable@nongnu.org
Reported-by: Oleksii Shevchuk <alxchk@gmail.com>
Tested-by: Oleksii Shevchuk <alxchk@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It was introduced to loop over CPUs from target-independent code, but
since commit 182735efaf target-independent
CPUState is used.
A loop can be considered more efficient than function calls in a loop,
and CPU_FOREACH() hides implementation details just as well, so use that
instead.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 1a1562f5ea prepared a VMSTATE_CPU()
macro for device-style VMStateDescription registration, but missed to
adapt cpu_exec_init(), so that the "cpu_common" VMStateDescription was
still registered for AlphaCPU (fe31e73742)
and OpenRISCCPU (da69721460). Fix this.
Cc: Richard Henderson <rth@twiddle.net>
Tested-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Passing a CPUState pointer instead of a CPUArchState pointer eliminates
the last target dependent data type in sysemu/kvm.h.
It also simplifies the code.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* riku/linux-user-for-upstream: (21 commits)
linux-user: Handle compressed ISA encodings when processing MIPS exceptions
linux-user: Unlock mmap_lock when resuming guest from page_unprotect
linux-user: Reset copied CPUs in cpu_copy() always
linux-user: Fix epoll on ARM hosts
linux-user: fix segmentation fault passing with h2g(x) != x
linux-user: Fix pipe syscall return for SPARC
linux-user: Fix target_stat and target_stat64 for OpenRISC
linux-user: Avoid conditional cpu_reset()
configure: Make NPTL non-optional
linux-user: Enable NPTL for x86-64
linux-user: Add i386 TLS setter
linux-user: Clean up handling of clone() argument order
linux-user: Add missing 'break' in i386 get_thread_area syscall
linux-user: Enable NPTL for m68k
linux-user: Enable NPTL for SPARC targets
linux-user: Enable NPTL for OpenRISC
linux-user: Move includes of target-specific headers to end of qemu.h
configure: Enable threading for unicore32-linux-user
configure: Enable threading on all ppc and mips linux-user targets
configure: Don't say target_nptl="no" if there is no linux-user target
...
Conflicts:
linux-user/main.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When a new thread gets created, we need to reset non arch specific state to
get the new CPU into clean state.
However this reset should happen before the arch specific CPU contents get
copied over. Otherwise we end up having clean reset state in our newly created
thread.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Change breakpoint_invalidate() argument to CPUState alongside.
Since all targets now assign a softmmu-only field, we can drop helpers
cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd().
Prepares for changing cpu_memory_rw_debug() argument to CPUState.
Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa)
Signed-off-by: Andreas Färber <afaerber@suse.de>
Prepares for changing cpu_single_step() argument to CPUState.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Signed-off-by: Andreas Färber <afaerber@suse.de>
access_size_min can be 1 because erroneous accesses must not crash
QEMU, they should trigger exceptions in the guest or just return
garbage (depending on the CPU). I am not sure I understand the
comment: placing a 4-byte field at the last byte of a region
makes no sense (unless impl.unaligned is true), and that is
why memory.c:access_with_adjusted_size does not bother with
minimums larger than the remaining length.
access_size_max can be mr->ops->valid.max_access_size because memory.c
can and will still break accesses bigger than
mr->ops->impl.max_access_size.
Reported-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e3127ae0 introduced a problem where we're passing a
hwaddr* to qemu_ram_ptr_length() but it wants a ram_addr_t*;
this will cause problems on 32 bit hosts and in any case
provokes a clang warning on MacOSX:
CC arm-softmmu/exec.o
exec.c:2164:46: warning: incompatible pointer types passing 'hwaddr *'
(aka 'unsigned long long *') to parameter of type 'ram_addr_t *'
(aka 'unsigned long *')
[-Wincompatible-pointer-types]
return qemu_ram_ptr_length(raddr + base, plen);
^~~~
exec.c:1392:63: note: passing argument to parameter 'size' here
static void *qemu_ram_ptr_length(ram_addr_t addr, ram_addr_t *size)
^
Since this function is only used in one place, change its
prototype to pass a hwaddr* rather than a ram_addr_t*,
rather than contorting the calling code to get the type right.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Riku Voipio <riku.voipio@linaro.org>
Tested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Honor the implementation maximum access size, and at least check
the minimum access size.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Since commit 878096eeb2 (cpu: Turn
cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no
longer needed.
Add documentation and make the functions available through qemu/log.h
outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h
was not yet possible due to convoluted include paths, so that some
devices grow an implicit and unneeded dependency on qom/cpu.h for now.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: Richard Henderson <rth@twiddle.net>
[AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.
gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
The previous two commits fixed bugs in -machine option queries. I
can't find fault with the remaining queries, but let's use
qemu_get_machine_opts() everywhere, for consistency, simplicity and
robustness.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-7-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It seems to be unused since several years (commit
be995c2764 in 2006).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1373044036-14443-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
cur_map is not used anymore; instead, each AddressSpaceDispatch
has its own nodes/sections pair. The priorities of the
MemoryListeners, and in the future RCU, guarantee that the
nodes/sections are not freed while they are still in use.
(In fact, next_map itself is not needed except to free the data on the
next update).
To avoid incorrect use, replace cur_map with a temporary copy that
is only valid while the topology is being updated. If you use it,
the name prev_map makes it clear that you're doing something weird.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After this patch, AddressSpaceDispatch holds a constistent tuple of
(phys_map, nodes, sections). This will be important when updates
of the topology will run concurrently with reads.
cur_map is not used anymore except for freeing it at the end of the
topology update.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This same treatment previously done to phys_node_map and phys_sections
is now applied to the dispatch field of AddressSpace. Topology updates
use as->next_dispatch while accesses use as->dispatch.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will help having two copies of AddressSpaceDispatch during the
recreation of the radix tree (one being built, and one that is complete
and will be protected by RCU). We do not want to have to unregister and
re-register the listener.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, phys_node_map and phys_sections are shared by all
of the AddressSpaceDispatch. When updating mem topology, all
AddressSpaceDispatch will rebuild dispatch tables sequentially
on them. In order to prepare for RCU access, leave the old
memory map alive while the next one is being accessed.
When rebuilding, the new dispatch tables will build and lookup
next_map; after all dispatch tables are rebuilt, we can switch
to next_* and free the previous table.
Based on a patch from Liu Ping Fan.
Signed-off-by: Liu Ping Fan <qemulist@gmail.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sections like phys_section_unassigned always have fixed address
in phys_sections. Declared as macro, so we can use them
when having more than one phys_sections array.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Liu Ping Fan <qemulist@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The iothread mutex might be released between map and unmap, so the
mapped region might disappear.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
First of all, rename "todo" to "done".
Second, clearly separate the case of done == 0 with the case of done != 0.
This will help handling reference counting in the next patch.
Third, this test:
if (memory_region_get_ram_addr(mr) + xlat != raddr + todo) {
does not guarantee that the memory region is the same across two iterations
of the while loop. For example, you could have two blocks:
A) size 640 K, mapped at physical address 0, ram_addr_t 0
B) size 64 K, mapped at physical address 0xa0000, ram_addr_t 0xa0000
then mapping 1 M starting at physical address zero will erroneously treat
B as the continuation of block A. qemu_ram_ptr_length ensures that no
invalid memory is accessed, but it is still a pointless complication of
the algorithm. The patch makes the logic clearer with an explicit test
that the memory region is the same.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After the next patch it would not be used elsewhere anyway. Also,
the _nofail and the standard versions of this function return different
things, which is confusing. Removing the function from the public headers
limits the confusion.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add ref/unref calls at the following places:
- places where memory regions are stashed by a listener and
used outside the BQL (including in Xen or KVM).
- memory_region_find callsites
- creation of aliases and containers (only the aliased/contained
region gets a reference to avoid loops)
- around calls to del_subregion/add_subregion, where the region
could disappear after the first call
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not bother visiting the radix tree when an address space is destroyed.
After the previous patch, this has become a pointless exercise. When
called from address_space_destroy_dispatch, all you're doing is zeroing
out a structure that will be freed as soon as you come back. When called
from mem_begin, when phys_page_set_level will call phys_map_node_alloc the
radix tree's array will be zeroed too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
phys_sections_clear is invoked after the dispatch tree has been
destroyed. This leaves a window where phys_sections_nb > 0 but the
subpages are not valid anymore, which is a recipe for use-after-free
bugs.
Move the destruction of subpages in phys_sections_clear. We will
still destroy the subpages when an address space is cleaned up,
because address_space_destroy will clear as->root and commit the
change before it calls address_space_destroy_dispatch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current ioport dispatcher is a complex beast, mostly due to the
need to deal with old portio interface users. But we can overcome it
without converting all portio users by embedding the required base
address of a MemoryRegionPortio access into that data structure. That
removes the need to have the additional MemoryRegionIORange structure
in the loop on every access.
To handle old portio memory ops, we simply install dispatching handlers
for portio memory regions when registering them with the memory core.
This removes the need for the old_portio field.
We can drop the additional aliasing of ioport regions and also the
special address space listener. cpu_in and cpu_out now simply call
address_space_read/write. And we can concentrate portio handling in a
single source file.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make cpustats monitor command available unconditionally.
Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec()
arguments to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer depends on CPUArchState, so move it to qom/cpu.c.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be used to embed common CPU state into CPU subclasses.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This is used during RDMA initialization in order to
transmit a description of all the RAM blocks to the
peer for later dynamic chunk registration purposes.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The "info mtree" command in QEMU console prints only "memory" and "I/O"
address spaces while there are actually a lot more other AddressSpace
structs created by PCI and VIO devices. Those devices do not normally
have names and therefore not present in "info mtree" output.
The patch fixes this.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The DMAContext is a simple pointer to an AddressSpace that is now always
already available. Make everyone hold the address space directly,
and clean up the DMA API to use the AddressSpace directly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The translate function in the DMAContext is now always NULL.
Remove every reference to it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new memory region type that translates addresses it is given,
then forwards them to a target address space. This is similar to
an alias, except that the mapping is more flexible than a linear
translation and trucation, and also less efficient since the
translation happens at runtime.
The implementation uses an AddressSpace mapping the target region to
avoid hierarchical dispatch all the way to the resolved region; only
iommu regions are looked up dynamically.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
[Modified to put translation in address_space_translate; assume
IOMMUs are not reachable from TCG. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So far, the size of all regions passed to listeners could fit in 64 bits,
because artificial regions (containers and aliases) are eliminated by
the memory core, leaving only device regions which have reasonable sizes
An IOMMU however cannot be eliminated by the memory core, and may have
an artificial size, hence we may need 65 bits to represent its size.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When adding support for 2^64-byte sections, we will have to change
the structure of mem_add to avoid failures in int128_get64.
Reorganize the code now before introducing Int128.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only address_space_translate_for_iotlb needs to return the section.
Every caller of address_space_translate now uses only section->mr,
return it directly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will allow to add support for unaligned memory regions: the subpage
container region can activate unaligned support unconditionally because
the read/write handler will now ensure that accesses are split as
required by calling address_space_rw. We can furthermore drop the
special handling of RAM subpages, address_space_rw takes care of this
already.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Except for the case of setting the IOTLB entry in TCG mode, we can avoid
the subpage dispatching handlers and do the resolution directly on
address_space_lookup_region. An IOTLB entry describes a full page, not
only the region that the first access to a sub-divided page may return.
This patch therefore introduces a special translation function,
address_space_translate_for_iotlb, that avoids the subpage resolutions.
In contrast, callers of the existing address_space_translate service
will now always receive the terminal memory region section. This will be
important for breaking the BQL and for enabling unaligned memory region.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be needed for some corner cases with para-virtual I/O ports.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This introduces a wrapper for phys_page_find (before we complicate
address_space_translate with IOMMU translation). This function will
also encapsulate locking and reference counting when we introduce
BQL-free dispatching.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The memory API allows a MemoryRegion's size to be 2^64, as a special
case (otherwise the size always fits in a 64 bit integer). This meant
that attempts to access address zero in a 2^64 sized region would
assert in address_space_translate():
#3 0x00007ffff3e4d192 in __GI___assert_fail#(assertion=0x555555a43f32
"!a.hi", file=0x555555a43ef0 "include/qemu/int128.h", line=18,
function=0x555555a4439f "int128_get64") at assert.c:103
#4 0x0000555555877642 in int128_get64 (a=...)
at include/qemu/int128.h:18
#5 0x00005555558782f2 in address_space_translate (as=0x55555668d140,
/addr=0, xlat=0x7fffafac9918, plen=0x7fffafac9920, is_write=false)
at exec.c:221
Fix this by doing the 'min' operation in 128 bit arithmetic
rather than 64 bit arithmetic (we know the result of the 'min'
definitely fits in 64 bits because one of the inputs did).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The memory API is able to split it in two 4-byte accesses.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The old-style IOMMU lets you check whether an access is valid in a
given DMAContext. There is no equivalent for AddressSpace in the
memory API, implement it with a lookup of the dispatch tree.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be used by address_space_access_valid too.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After the previous patches, this is a common test for all read/write
functions.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no need to use the special phys_section_rom section.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using phys_page_find to translate an AddressSpace to a MemoryRegionSection
is unwieldy. It requires to pass the page index rather than the address,
and later memory_region_section_addr has to be called. Replace
memory_region_section_addr with a function that does all of it: call
phys_page_find, compute the offset within the region, and check how
big the current mapping is. This way, a large flat region can be written
with a single lookup rather than a page at a time.
address_space_translate will also provide a single point where IOMMU
forwarding is implemented.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This provides the basics for detecting accesses to unassigned memory
as soon as they happen, and also for a simple implementation of
address_space_access_valid.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will soon reach this case when doing (unaligned) accesses that
span partly past the end of memory. We do not want to crash in
that case.
unassigned_mem_ops and rom_mem_ops are now the same.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no reason to avoid a recompile before accessing unassigned
memory. In the end it will be treated as MMIO anyway.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is never used, the IOTLB always goes through io_mem_notdirty.
In fact in softmmu_template.h, if it were, QEMU would crash just
below the tests, as soon as io_mem_read/write dispatches to
error_mem_read/write.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The radix tree is statically sized to fit TARGET_PHYS_ADDR_SPACE_BITS.
If a larger memory region is registered, it will overflow.
Fix by limiting any section in the radix tree to the supported size.
This problem was not observed earlier since artificial regions (containers
and aliases) are eliminated by the memory core, leaving only device regions
which have reasonable sizes. An IOMMU however cannot be eliminated by the
memory core, and may have an artificial size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
[ Fail the build if TARGET_PHYS_ADDR_SPACE_BITS is too large - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While sized to 15 bits in PhysPageEntry, the ptr field is ORed into the
iotlb entries together with a page-aligned pointer. The ptr field must
not overflow into this page-aligned value, assert that it is smaller than
the page size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
See how we call memory_region_section_addr two lines below to
convert a physical address to a base address in the region.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We switched from qemu_memalign to mmap() but then we don't modify
qemu_vfree() to do a munmap() over free(). Which we cannot do
because qemu_vfree() frees memory allocated by qemu_{mem,block}align.
Introduce a new function that does the munmap(), luckily the size is
available in the RAMBlock.
Reported-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Message-id: 1368454796-14989-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is preparatory to the introduction of a separate freeing API.
Reported-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Message-id: 1368454796-14989-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Wrapper to avoid open-coded loops and to make CPUState iteration
independent of CPUArchState.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
find_ram_offset() does not handle size=0 gracefully. It hands out the
same RAMBlock offset multiple times, leading to obscure failures later
on.
Add an assert to warn early if something is incorrectly allocating a
zero size RAMBlock.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# By Andreas Färber (16) and Igor Mammedov (1)
# Via Andreas Färber
* afaerber/qom-cpu:
target-lm32: Update VMStateDescription to LM32CPU
target-arm: Override do_interrupt for ARMv7-M profile
cpu: Replace do_interrupt() by CPUClass::do_interrupt method
cpu: Pass CPUState to cpu_interrupt()
exec: Pass CPUState to cpu_reset_interrupt()
cpu: Move halted and interrupt_request fields to CPUState
target-cris/helper.c: Update Coding Style
target-i386: Update VMStateDescription to X86CPU
cpu: Introduce cpu_class_set_vmsd()
cpu: Register VMStateDescription through CPUState
stubs: Add a vmstate_dummy struct for CONFIG_USER_ONLY
vmstate: Make vmstate_register() static inline
target-sh4: Move PVR/PRR/CVR into SuperHCPUClass
target-sh4: Introduce SuperHCPU subclasses
cpus: Replace open-coded CPU loop in qmp_memsave() with qemu_get_cpu()
monitor: Use qemu_get_cpu() in monitor_set_cpu()
cpu: Fix qemu_get_cpu() to return NULL if CPU not found
Adds ramblocks' names to their backing files when using -mem-path. Eases
introspection and debugging.
Signed-off-by: Peter Feiner <peter@gridcentric.ca>
Message-id: 1362423265-15855-1-git-send-email-peter@gridcentric.ca
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move it to qom/cpu.h to avoid issues with include order.
Change pc_acpi_smi_interrupt() opaque to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move it to qom/cpu.c to avoid build failures depending on include order
of cpu-qom.h and exec/cpu-all.h.
Change opaques of various ..._irq_handler() functions to the
appropriate CPU type to facilitate using cpu_reset_interrupt().
Fix Coding Style issues while at it (missing braces, indentation).
Signed-off-by: Andreas Färber <afaerber@suse.de>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
In comparison to DeviceClass::vmsd, CPU VMState is split in two,
"cpu_common" and "cpu", and uses cpu_index as instance_id instead of -1.
Therefore add a CPU-specific CPUClass::vmsd field.
Unlike the legacy CPUArchState registration, rather register CPUState.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Commit 55e5c2850 breaks CPU not found return value, and returns
CPU corresponding to the last non NULL env.
Fix it by returning CPU only if env is not NULL, otherwise CPU is
not found and function should return NULL.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Fix some of the nasty TCG race conditions and crashes by implementing
cpu_exit() as setting a flag which is checked at the start of each TB.
This avoids crashes if a thread or signal handler calls cpu_exit()
while the execution thread is itself modifying the TB graph (which
may happen in system emulation mode as well as in linux-user mode
with a multithreaded guest binary).
This fixes the crashes seen in LP:668799; however there are another
class of crashes described in LP:1098729 which stem from the fact
that in linux-user with a multithreaded guest all threads will
use and modify the same global TCG date structures (including the
generated code buffer) without any kind of locking. This means that
multithreaded guest binaries are still in the "unsupported"
category.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
g_strdup_printf already handles OOM errors, so some error handling in
QEMU code can be removed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move the declaration to qemu/cpu.h and add documentation.
The implementation still depends on CPUArchState for CPU iteration.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Note that target-alpha accesses this field from TCG, now using a
negative offset. Therefore the field is placed last in CPUState.
Pass PowerPCCPU to [kvm]ppc_fixup_cpu() to facilitate this change.
Move common parts of mips cpu_state_reset() to mips_cpu_reset().
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
[AF: Rebased onto ppc CPU subclasses and openpic changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
