Commit Graph

28857 Commits

Author SHA1 Message Date
Miroslav Rezanina
615fe4de4b Remove dev-bluetooth.c dependency from vl.c
Use usb_legacy_register handling to create bt-dongle device and remove code
dependency from vl.c so CONFIG_USB_BLUETOOTH can be disabled.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-10 11:14:42 +02:00
Miroslav Rezanina
644e1a8a34 Preparation for usb-bt-dongle conditional build
To allow disable usb-bt-dongle device using CONFIG_BLUETOOTH option, some of
functions in vl.c file has to be made accessible in dev-bluetooth.c. This is
pure code moving.

Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-10 11:14:41 +02:00
Gerd Hoffmann
c60174e847 usb: sanity check setup_index+setup_len in post_load
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-10 11:14:41 +02:00
Gerd Hoffmann
c58c7b959b qxl: fix local renderer
The local spice renderer assumes the primary surface is located at the
start of the "ram" bar.  This used to be a requirement in qxl hardware
revision 1.  In revision 2+ this is relaxed.  Nevertheless guest drivers
continued to use the traditional location, for historical and backward
compatibility reasons.  The qxl kms driver doesn't though as it depends
on qxl revision 4+ anyway.

Result is that local rendering is hosed for recent linux guests, you'll
get pixel garbage with non-spice ui (gtk, sdl, vnc) and when doing
screendumps.  Fix that by doing a proper mapping of the guest-specified
memory location.

https://bugzilla.redhat.com/show_bug.cgi?id=948717

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-10 11:14:08 +02:00
Gerd Hoffmann
18b203850a qxl: trace io port name
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-10 11:14:08 +02:00
Christophe Fergeau
6735aa99a4 spice-core: Use g_strdup_printf instead of snprintf
Several places in spice-core.c were using either g_malloc+snprintf
or snprintf+g_strdup to achieve the same result as g_strdup_printf.

Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-10 11:14:08 +02:00
Tomoki Sekiyama
e2682db06a QMP/qemu-ga-client: Make timeout longer for guest-fsfreeze-freeze command
guest-fsfreeze-freeze command can take longer than 3 seconds when heavy
disk I/O is running. To avoid unexpected timeout, this changes the timeout
to 60 seconds (timeout of pre-commit phase of VSS).

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-09-09 14:17:57 -05:00
Tomoki Sekiyama
f311f2c20a qemu-ga: Install Windows VSS provider on `qemu-ga -s install'
Register QGA VSS provider library into Windows when qemu-ga is installed as
Windows service ('-s install' option). It is deregistered when the service
is uninstalled ('-s uninstall' option).

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-09-09 14:17:57 -05:00
Tomoki Sekiyama
64c0031740 qemu-ga: Call Windows VSS requester in fsfreeze command handler
Support guest-fsfreeze-freeze and guest-fsfreeze-thaw commands for Windows
guests. When fsfreeze command is issued, it calls the VSS requester to
freeze filesystems and applications. On thaw command, it again tells the VSS
requester to thaw them.

This also adds calling of initialize functions for the VSS requester.

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-09-09 14:17:57 -05:00
Tomoki Sekiyama
b39297aedf qemu-ga: Add Windows VSS provider and requester as DLL
Adds VSS provider and requester as a qga-vss.dll, which is loaded by
Windows VSS service as well as by qemu-ga.

"provider.cpp" implements a basic stub of a software VSS provider.
Currently, this module only relays a frozen event from VSS service to the
agent, and thaw event from the agent to VSS service, to block VSS process
to keep the system frozen while snapshots are taken at the host.

To register the provider to the guest system as COM+ application, the type
library (.tlb) for qga-vss.dll is required. To build it from COM IDL (.idl),
VisualC++, MIDL and stdole2.tlb in Windows SDK are required. This patch also
adds pre-compiled .tlb file in the repository in order to enable
cross-compile qemu-ga.exe for Windows with VSS support.

"requester.cpp" provides the VSS requester to kick the VSS snapshot process.
Qemu-ga.exe works without the DLL, although fsfreeze features are disabled.

These functions are only supported in Windows 2003 or later. In older
systems, fsfreeze features are disabled.

In several versions of Windows which don't support attribute
VSS_VOLSNAP_ATTR_NO_AUTORECOVERY, DoSnapshotSet fails with error
VSS_E_OBJECT_NOT_FOUND. In this patch, we just ignore this error.
To solve this fundamentally, we need a framework to handle mount writable
snapshot on guests, which is required by VSS auto-recovery feature
(cleanup phase after a snapshot is taken).

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-09-09 14:17:57 -05:00
Tomoki Sekiyama
20840d4cfe error: Add error_set_win32 and error_setg_win32
These functions help maintaining homogeneous formatting of error messages
with Windows error code and description (generated by
g_win32_error_message()).

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-09-09 14:17:57 -05:00
Tomoki Sekiyama
d9840e2592 qemu-ga: Add configure options to specify path to Windows/VSS SDK
To enable VSS support in qemu-ga for Windows, header files included in
VSS SDK are required.
The VSS support is enabled by the configure option like below:
  ./configure --with-vss-sdk="/path/to/VSS SDK"

If the path is omitted, it tries to search the headers from default paths
and VSS support is enabled only if the SDK is found.
VSS support is disabled if --without-vss-sdk or --with-vss-sdk=no is
specified.

VSS SDK is available from:
  http://www.microsoft.com/en-us/download/details.aspx?id=23490

To cross-compile using mingw, you need to setup the SDK on Windows
environments to extract headers. You can also extract the SDK headers on
POSIX environments using scripts/extract-vss-headers and msitools.

In addition, --with-win-sdk="/path/to/Windows SDK" option is also added to
specify path to Windows SDK, which may be used for native-compile of .tlb
file of qemu-ga VSS provider. However, this is usually unnecessary because
pre-compiled .tlb file is included.

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-09-09 14:17:56 -05:00
Tomoki Sekiyama
24482749c7 Add a script to extract VSS SDK headers on POSIX system
VSS SDK(*) setup.exe is only runnable on Windows. This adds a script
to extract VSS SDK headers on POSIX-systems using msitools.

  * http://www.microsoft.com/en-us/download/details.aspx?id=23490

From: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-09-09 14:17:56 -05:00
Tomoki Sekiyama
69d5d21f90 checkpatch.pl: Check .cpp files
Enable checkpatch.pl to apply the same checks as C source files for
C++ files with .cpp extensions. It also adds some exceptions for C++
sources to suppress errors for:
  - <> used in C++ template arguments (e.g. template <class T>)
  - :: used to represent namespaces   (e.g. SomeClass::method())
  - : used in class declaration       (e.g. class T : public Super)
  - ~ used in destructor method name  (e.g. T::~T())
  - spacing around 'catch'            (e.g. catch (...))

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-09-09 14:17:56 -05:00
Tomoki Sekiyama
6f88009ee5 Add c++ keywords to QAPI helper script
Add c++ keywords to avoid errors in compiling with c++ compiler.
This also renames class member of PciDeviceInfo to q_class.

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-09-09 14:17:56 -05:00
Tomoki Sekiyama
83f73fce4c configure: Support configuring C++ compiler
Add configuration for C++ compiler in configure and Makefiles.
The C++ compiler is choosed as following:
 - ${CXX}, if it is specified.
 - ${cross_prefix}g++, if ${cross_prefix} is specified.
 - Otherwise, c++ is used.

Currently, usage of C++ language is only for access to Windows VSS
using COM+ services in qemu-guest-agent for Windows.

Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Micael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-09-09 14:17:56 -05:00
Paul Burton
94c2b6aff4 mips_malta: support up to 2GiB RAM
A Malta board can support up to 2GiB of RAM. Since the unmapped kseg0/1
regions are only 512MiB large & the latter 256MiB of those are taken up
by the IO region, access to RAM beyond 256MiB must be done through a
mapped region. In the case of a Linux guest this means we need to use
highmem.

The mainline Linux kernel does not support highmem for Malta at this
time, however this can be tested using the linux-mti-3.8 kernel branch
available from:

  git://git.linux-mips.org/pub/scm/linux-mti.git

You should be able to boot a Linux kernel built from the linux-mti-3.8
branch, with CONFIG_HIGHMEM enabled, using 2GiB RAM by passing "-m 2G"
to QEMU and appending the following kernel parameters:

  mem=256m@0x0 mem=256m@0x90000000 mem=1536m@0x20000000

Note that the upper half of the physical address space of a Malta
mirrors the lower half (hence the 2GiB limit) except that the IO region
(0x10000000-0x1fffffff in the lower half) is not mirrored in the upper
half. That is, physical addresses 0x90000000-0x9fffffff access RAM
rather than the IO region, resulting in a physical address space
resembling the following:

  0x00000000 -> 0x0fffffff  RAM
  0x10000000 -> 0x1fffffff  I/O
  0x20000000 -> 0x7fffffff  RAM
  0x80000000 -> 0x8fffffff  RAM (mirror of 0x00000000 -> 0x0fffffff)
  0x90000000 -> 0x9fffffff  RAM
  0xa0000000 -> 0xffffffff  RAM (mirror of 0x20000000 -> 0x7fffffff)

The second mem parameter provided to the kernel above accesses the
second 256MiB of RAM through the upper half of the physical address
space, making use of the aliasing described above in order to avoid
the IO region and use the whole 2GiB RAM.

The memory setup may be seen as 'backwards' in this commit since the
'real' memory is mapped in the upper half of the physical address space
and the lower half contains the aliases. On real hardware it would be
typical to see the upper half of the physical address space as the alias
since the bus addresses generated match the lower half of the physical
address space. However since the memory accessible in the upper half of
the physical address space is uninterrupted by the IO region it is
easiest to map the RAM as a whole there, and functionally it makes no
difference to the target code.

Due to the requirements of accessing the second 256MiB of RAM through
a mapping to the upper half of the physical address space it is usual
for the bootloader to indicate a maximum of 256MiB memory to a kernel.
This allows kernels which do not support such access to boot on systems
with more than 256MiB of RAM. It is also the behaviour assumed by Linux.
QEMUs small generated bootloader is modified to provide this behaviour.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-09-09 18:42:22 +02:00
Anthony PERARD
254c12825f pc_q35: Initialize Xen.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-09 16:24:33 +00:00
Anthony PERARD
04d7bad8a4 pc: Initializing ram_memory under Xen.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
CC: qemu-stable@nongnu.org
2013-09-09 16:22:19 +00:00
Aurelien Jarno
45d883dcf2 ne2000: mark I/O as LITTLE_ENDIAN
Now that the memory subsystem is propagating the endianness correctly,
the ne2000 device should have its I/O ports marked as LITTLE_ENDIAN, as
PCI devices are little endian.

This makes the ne2000 NIC to work again on PowerPC.

Cc: qemu-stable@nongnu.org
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 17:27:40 +02:00
Brad Smith
3dbb9786e9 vmxnet3: Eliminate __packed redefined warning
This eliminates a warning about __packed being redefined as exposed by the
vmxnet3 code. __packed is not used anywhere in the vmxnet3 code.

  CC    hw/net/vmxnet3.o
In file included from hw/net/vmxnet3.c:29:
hw/net/vmxnet3.h:37:1: warning: "__packed" redefined
In file included from /usr/include/stdlib.h:38,
                 from /buildbot-qemu/default_openbsd_current/build/include/qemu-common.h:26,
                 from /buildbot-qemu/default_openbsd_current/build/include/hw/hw.h:5,
                 from hw/net/vmxnet3.c:18:
/usr/include/sys/cdefs.h:209:1: warning: this is the location of the previous definition

Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 17:25:55 +02:00
Vincenzo Maffione
e9845f0985 e1000: add interrupt mitigation support
This patch partially implements the e1000 interrupt mitigation mechanisms.
Using a single QEMUTimer, it emulates the ITR register (which is the newer
mitigation register, recommended by Intel) and approximately emulates
RADV and TADV registers. TIDV and RDTR register functionalities are not
emulated (RDTR is only used to validate RADV, according to the e1000 specs).

RADV, TADV, TIDV and RDTR registers make up the older e1000 mitigation
mechanism and would need a timer each to be completely emulated. However,
a single timer has been used in order to reach a good compromise between
emulation accuracy and simplicity/efficiency.

The implemented mechanism can be enabled/disabled specifying the command
line e1000-specific boolean parameter "mitigation", e.g.

    qemu-system-x86_64 -device e1000,mitigation=on,... ...

For more information, see the Software developer's manual at
http://download.intel.com/design/network/manuals/8254x_GBe_SDM.pdf.

Interrupt mitigation boosts performance when the guest suffers from
an high interrupt rate (i.e. receiving short UDP packets at high packet
rate). For some numerical results see the following link
http://info.iet.unipi.it/~luigi/papers/20130520-rizzo-vm.pdf

Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de> (for pc-* machines)
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 17:25:52 +02:00
Jan Kiszka
067404be62 net: Rename send_queue to incoming_queue
Each networking client has a queue for packets that could not yet be
delivered to that client. Calling this queue "send_queue" is highly
confusing as it has nothing to to with packets send from this client but
to it. Avoid this confusing by renaming it to "incoming_queue".

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 17:01:26 +02:00
Brad Smith
aa4f082f75 tap: Use numbered tap/tun devices on all *BSD OS's
The following patch simplifies the *BSD tap/tun code and makes use of numbered
tap/tun interfaces on all *BSD OS's. NetBSD has a patch in their pkgsrc tree
to make use of this feature and DragonFly also supports this as well.

Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 17:01:26 +02:00
Kevin Wolf
8f94b07787 qemu-iotests: Fixed test case 026
The reference output for test case 026 hasn't been updated in a long
time and it's one of the "known failing" cases. This patch updates the
reference output so that unintentional changes can be reliably detected
again.

The problem with this test case is that it produces different output
depending on whether -nocache is used or not. The solution of this patch
is to actually have two different reference outputs. If nnn.out.nocache
exists, it is used as the reference output for -nocache; otherwise,
nnn.out stays valid for both cases.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:10 +02:00
Kevin Wolf
79e40ab10e qemu-iotests: Whitespace cleanup
These scripts used to have a four characters indentation, with eight
consecutive spaces converted into a tab. Convert everything into spaces.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Cornelia Huck
8caf907f07 dataplane: Fix startup race.
Avoid trying to setup dataplane again if dataplane setup is already in
progress. This may happen if an eventfd is triggered during setup.

I saw this occasionally with an experimental s390 irqfd implementation:

virtio_blk_handle_output
-> virtio_blk_data_plane_start
-> virtio_ccw_set_host_notifier
...
-> virtio_queue_set_host_notifier_fd_handler
-> virtio_queue_host_notifier_read
-> virtio_queue_notify_vq
-> virtio_blk_handle_output
-> virtio_blk_data_plane_start
-> vring_setup
-> hostmem_init
-> memory_listener_register
-> BOOM

As virtio-ccw tries to follow what virtio-pci does, it might be triggerable
for other platforms as well.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini
5daa74a6eb block: look for zero blocks in bs->file
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini
918e92d71b block: add default get_block_status implementation for protocols
Protocols return raw data, so you can assume the offsets to pass
through unchanged.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini
f5f7abcfd5 raw-posix: report unwritten extents as zero
These are created for example with XFS_IOC_ZERO_RANGE.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini
63390a8d14 raw-posix: return get_block_status data and flags
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini
facd6e2b5c docs, qapi: document qemu-img map
Eric Blake also requested including the output in qapi-schema.json,
so that it is published through the introspection mechanism.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini
4c93a13b5d qemu-img: add a "map" subcommand
This command dumps the metadata of an entire chain, in either tabular or JSON
format.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini
f0ad5712d5 block: return BDRV_BLOCK_ZERO past end of backing file
If the sectors are unallocated and we are past the end of the
backing file, they will read as zero.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini
415b5b013c block: use bdrv_has_zero_init to return BDRV_BLOCK_ZERO
Alternatively, this could use a "discard zeroes data" flag returned
by bdrv_get_info.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini
4bc74be997 block: return get_block_status data and flags for formats
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini
4333bb7140 block: define get_block_status return value
Define the return value of get_block_status.  Bits 0, 1, 2 and 9-62
are valid; bit 63 (the sign bit) is reserved for errors.  Bits 3-8
are left for future extensions.

The return code is compatible with the old is_allocated API: if a driver
only returns 0 or 1 (aka BDRV_BLOCK_DATA) like is_allocated used to,
clients of is_allocated will not have any change in behavior.  Still,
we will return more precise information in the next patches and the
new definition of bdrv_is_allocated is already prepared for this.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini
b6b8a33354 block: introduce bdrv_get_block_status API
For now, bdrv_get_block_status is just another name for bdrv_is_allocated.
The next patches will add more flags.

This also touches all block drivers with a mostly mechanical rename.  The
sole exception is cow; because it calls cow_co_is_allocated from the read
code, we keep that function and make cow_co_get_block_status a wrapper.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini
11212d8fa0 block: make bdrv_has_zero_init return false for copy-on-write-images
This helps implementing is_allocated on top of get_block_status.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini
e4a86f88cc qemu-img: always probe the input image for allocated sectors
qemu-img convert can assume "that sectors which are unallocated in the
input image are present in both the output's and input's base images".

However it is only doing this if the output image returns true for
bdrv_has_zero_init().  Testing bdrv_has_zero_init() does not make much
sense if the output image is copy-on-write, because a copy-on-write
image is never initialized to zero (it is initialized to the content
of the backing file).

There is nothing here that makes has_zero_init images special.  The
input and output must be equal for the operation to make sense, and
that's it.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini
d663640c04 block: expect errors from bdrv_co_is_allocated
Some bdrv_is_allocated callers do not expect errors, but the fallback
in qcow2.c might make other callers trip on assertion failures or
infinite loops.

Fix the callers to always look for errors.

Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini
4f5786376e block: remove bdrv_is_allocated_above/bdrv_co_is_allocated_above distinction
Now that bdrv_is_allocated detects coroutine context, the two can
use the same code.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:09 +02:00
Paolo Bonzini
617ccb466e block: do not use ->total_sectors in bdrv_co_is_allocated
This is more robust when the device has removable media.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:08 +02:00
Paolo Bonzini
bdad13b9de block: make bdrv_co_is_allocated static
bdrv_is_allocated can detect coroutine context and go through a fast
path, similar to other block layer functions.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:08 +02:00
Paolo Bonzini
df2a6f29a5 block: keep bs->total_sectors up to date even for growable block devices
If a BlockDriverState is growable, after every write we need to
check if bs->total_sectors might have changed.  With this change,
bdrv_getlength does not need anymore a system call.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:08 +02:00
Paolo Bonzini
e641c1e81e cow: do not call bdrv_co_is_allocated
As we change bdrv_is_allocated to gather more information from bs and
bs->file, it will become a bit slower.  It is still appropriate for online
jobs, but not for reads/writes.  Call the internal function instead.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:08 +02:00
Paolo Bonzini
26ae980492 cow: make writes go at a less indecent speed
Only sync once per write, rather than once per sector.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:08 +02:00
Paolo Bonzini
276cbc7f2f cow: make reads go at a decent speed
Do not do two reads for each sector; load each sector of the bitmap
and use bitmap operations to process it.

Writes are still dog slow!

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:08 +02:00
Max Reitz
0ca0b0d5f8 qmp: Documentation for BLOCK_IMAGE_CORRUPTED
Add an appropriate entry describing this event and its parameters into
qmp-events.txt.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:08 +02:00
Fam Zheng
fa510ebffa block: use BDS ref for block jobs
Block jobs used drive_get_ref(drive_get_by_blockdev(bs)) to avoid BDS
being deleted. Now we have BDS reference count, and block jobs don't
care about dinfo, so replace them to get cleaner code. It is also the
safe way when BDS has no drive info.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-09-06 15:25:08 +02:00