We set up TLB entries in tlb_set_page_with_attrs(), where we have
some logic for determining whether the TLB entry is considered
to be RAM-backed, and thus has a valid addend field. When we
look at the TLB entry in get_page_addr_code(), we use different
logic for determining whether to treat the page as RAM-backed
and use the addend field. This is confusing, and in fact buggy,
because the code in tlb_set_page_with_attrs() correctly decides
that rom_device memory regions not in romd mode are not RAM-backed,
but the code in get_page_addr_code() thinks they are RAM-backed.
This typically results in "Bad ram pointer" assertion if the
guest tries to execute from such a memory region.
Fix this by making get_page_addr_code() just look at the
TLB_MMIO bit in the code_address field of the TLB, which
tlb_set_page_with_attrs() sets if and only if the addend
field is not valid for code execution.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180713150945.12348-1-peter.maydell@linaro.org
There is no need for a stub, since tb_invalidate_phys_addr can be excised
altogether when TCG is disabled. This is a bit cleaner since it avoids
using code that is clearly specific to user-mode emulation (it calls
mmap_lock/unlock) for the !CONFIG_TCG case.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the --disable-tcg breakage introduced by 8bca9a03ec:
$ configure --disable-tcg
[...]
$ make -C i386-softmmu exec.o
make: Entering directory 'i386-softmmu'
CC exec.o
In file included from source/qemu/exec.c:62:0:
source/qemu/include/exec/ram_addr.h:96:6: error: conflicting types for ‘tb_invalidate_phys_range’
void tb_invalidate_phys_range(ram_addr_t start, ram_addr_t end);
^~~~~~~~~~~~~~~~~~~~~~~~
In file included from source/qemu/exec.c:24:0:
source/qemu/include/exec/exec-all.h:309:6: note: previous declaration of ‘tb_invalidate_phys_range’ was here
void tb_invalidate_phys_range(target_ulong start, target_ulong end);
^~~~~~~~~~~~~~~~~~~~~~~~
source/qemu/exec.c:1043:6: error: conflicting types for ‘tb_invalidate_phys_addr’
void tb_invalidate_phys_addr(AddressSpace *as, hwaddr addr, MemTxAttrs attrs)
^~~~~~~~~~~~~~~~~~~~~~~
In file included from source/qemu/exec.c:24:0:
source/qemu/include/exec/exec-all.h:308:6: note: previous declaration of ‘tb_invalidate_phys_addr’ was here
void tb_invalidate_phys_addr(target_ulong addr);
^~~~~~~~~~~~~~~~~~~~~~~
make: *** [source/qemu/rules.mak:69: exec.o] Error 1
make: Leaving directory 'i386-softmmu'
Tested to build x86_64-softmmu and i386-softmmu targets.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180629200710.27626-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Right now we can crash QEMU using e.g.
qemu-system-x86_64 -m 256M,maxmem=20G,slots=2 \
-object memory-backend-file,id=mem0,size=12288,mem-path=/dev/zero,align=12288 \
-device pc-dimm,id=dimm1,memdev=mem0
qemu-system-x86_64: util/mmap-alloc.c:115:
qemu_ram_mmap: Assertion `is_power_of_2(align)' failed
Fix this by adding a proper check.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180607154705.6316-3-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Place them in exec.c, exec-all.h and ram_addr.h. This removes
knowledge of translate-all.h (which is an internal header) from
several files outside accel/tcg and removes knowledge of
AddressSpace from translate-all.c (as it only operates on ram_addr_t).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When an IOMMUMemoryRegion is in front of a virtio device,
address_space_cache_init does not set cache->ptr as the memory
region is not RAM. However when the device performs an access,
we end up in glue() which performs the translation and then uses
MAP_RAM. This latter uses the unset ptr and returns a wrong value
which leads to a SIGSEV in address_space_lduw_internal_cached_slow,
for instance.
In slow path cache->ptr is NULL and MAP_RAM must redirect to
qemu_map_ram_ptr((mr)->ram_block, ofs).
As MAP_RAM, IS_DIRECT and INVALIDATE are the same in _cached_slow
and non cached mode, let's remove those macros.
This fixes the use cases featuring vIOMMU (Intel and ARM SMMU)
which lead to a SIGSEV.
Fixes: 48564041a7 (exec: reintroduce MemoryRegion caching)
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <1528895946-28677-1-git-send-email-eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Not needed. Don't expose last_ram_page().
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180620202736.21399-1-david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Fix the --disable-tcg breakage introduced by tb_lock's removal by
relying on the fact that tcg_enabled() is set to 0 at
compile-time under --disable-tcg.
While at it, add further asserts to fix builds that enable both
--disable-tcg and --enable-debug, which were broken even before
tb_lock's removal.
Tested to build x86_64-softmmu and i386-softmmu targets.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use mmap_lock in user-mode to protect TCG state and the page descriptors.
In !user-mode, each vCPU has its own TCG state, so no locks needed.
Per-page locks are used to protect the page descriptors.
Per-TB locks are used in both modes to protect TB jumps.
Some notes:
- tb_lock is removed from notdirty_mem_write by passing a
locked page_collection to tb_invalidate_phys_page_fast.
- tcg_tb_lookup/remove/insert/etc have their own internal lock(s),
so there is no need to further serialize access to them.
- do_tb_flush is run in a safe async context, meaning no other
vCPU threads are running. Therefore acquiring mmap_lock there
is just to please tools such as thread sanitizer.
- Not visible in the diff, but tb_invalidate_phys_page already
has an assert_memory_lock.
- cpu_io_recompile is !user-only, so no mmap_lock there.
- Added mmap_unlock()'s before all siglongjmp's that could
be called in user-mode while mmap_lock is held.
+ Added an assert for !have_mmap_lock() after returning from
the longjmp in cpu_exec, just like we do in cpu_exec_step_atomic.
Performance numbers before/after:
Host: AMD Opteron(tm) Processor 6376
ubuntu 17.04 ppc64 bootup+shutdown time
700 +-+--+----+------+------------+-----------+------------*--+-+
| + + + + + *B |
| before ***B*** ** * |
|tb lock removal ###D### *** |
600 +-+ *** +-+
| ** # |
| *B* #D |
| *** * ## |
500 +-+ *** ### +-+
| * *** ### |
| *B* # ## |
| ** * #D# |
400 +-+ ** ## +-+
| ** ### |
| ** ## |
| ** # ## |
300 +-+ * B* #D# +-+
| B *** ### |
| * ** #### |
| * *** ### |
200 +-+ B *B #D# +-+
| #B* * ## # |
| #* ## |
| + D##D# + + + + |
100 +-+--+----+------+------------+-----------+------------+--+-+
1 8 16 Guest CPUs 48 64
png: https://imgur.com/HwmBHXe
debian jessie aarch64 bootup+shutdown time
90 +-+--+-----+-----+------------+------------+------------+--+-+
| + + + + + + |
| before ***B*** B |
80 +tb lock removal ###D### **D +-+
| **### |
| **## |
70 +-+ ** # +-+
| ** ## |
| ** # |
60 +-+ *B ## +-+
| ** ## |
| *** #D |
50 +-+ *** ## +-+
| * ** ### |
| **B* ### |
40 +-+ **** # ## +-+
| **** #D# |
| ***B** ### |
30 +-+ B***B** #### +-+
| B * * # ### |
| B ###D# |
20 +-+ D ##D## +-+
| D# |
| + + + + + + |
10 +-+--+-----+-----+------------+------------+------------+--+-+
1 8 16 Guest CPUs 48 64
png: https://imgur.com/iGpGFtv
The gains are high for 4-8 CPUs. Beyond that point, however, unrelated
lock contention significantly hurts scalability.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently we don't support board configurations that put an IOMMU
in the path of the CPU's memory transactions, and instead just
assert() if the memory region fonud in address_space_translate_for_iotlb()
is an IOMMUMemoryRegion.
Remove this limitation by having the function handle IOMMUs.
This is mostly straightforward, but we must make sure we have
a notifier registered for every IOMMU that a transaction has
passed through, so that we can flush the TLB appropriately
when any of the IOMMUs change their mappings.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180604152941.20374-5-peter.maydell@linaro.org
Add an IOMMU index argument to the translate method of
IOMMUs. Since all of our current IOMMU implementations
support only a single IOMMU index, this has no effect
on the behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180604152941.20374-4-peter.maydell@linaro.org
Now we have stn_p() and ldn_p() we can use them in various
functions in exec.c that used to have their own switch-on-size code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180611171007.4165-4-peter.maydell@linaro.org
In subpage_read() we perform a load of the data into a local buffer
which we then access using ldub_p(), lduw_p(), ldl_p() or ldq_p()
depending on its size, storing the result into the uint64_t *data.
Since ldl_p() returns an 'int', this means that for the 4-byte
case we will sign-extend the data, whereas for 1 and 2 byte
reads we zero-extend it.
This ought not to matter since the caller will likely ignore values in
the high bytes of the data, but add a cast so that we're consistent.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180611171007.4165-3-peter.maydell@linaro.org
The API for cpu_transaction_failed() says that it takes the physical
address for the failed transaction. However we were actually passing
it the offset within the target MemoryRegion. We don't currently
have any target CPU implementations of this hook that require the
physical address; fix this bug so we don't get confused if we ever
do add one.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180611125633.32755-3-peter.maydell@linaro.org
On the POWER9 processor, the XIVE interrupt controller can control
interrupt sources using MMIO to trigger events, to EOI or to turn off
the sources. Priority management and interrupt acknowledgment is also
controlled by MMIO in the presenter sub-engine.
These MMIO regions are exposed to guests in QEMU with a set of 'ram
device' memory mappings, similarly to VFIO, and the VMAs are populated
dynamically with the appropriate pages using a fault handler.
But, these regions are an issue for migration. We need to discard the
associated RAMBlocks from the RAM state on the source VM and let the
destination VM rebuild the memory mappings on the new host in the
post_load() operation just before resuming the system.
To achieve this goal, the following introduces a new RAMBlock flag
RAM_MIGRATABLE which is updated in the vmstate_register_ram() and
vmstate_unregister_ram() routines. This flag is then used by the
migration to identify RAMBlocks to discard on the source. Some checks
are also performed on the destination to make sure nothing invalid was
sent.
This change impacts the boston, malta and jazz mips boards for which
migration compatibility is broken.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Coverity points out that in the user-only version of cpu_abort() we
call sigaction() with a partially initialized struct sigaction
(CID 1005351). Correct the omission.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180515182700.31736-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to address_space_translate_iommu().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-14-peter.maydell@linaro.org
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to flatview_do_translate().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-13-peter.maydell@linaro.org
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to address_space_get_iotlb_entry().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-12-peter.maydell@linaro.org
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to flatview_translate(); all its
callers now have attrs available.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-11-peter.maydell@linaro.org
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to flatview_access_valid().
Its callers now all have an attrs value to hand, so we can
correct our earlier temporary use of MEMTXATTRS_UNSPECIFIED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-10-peter.maydell@linaro.org
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to the MemoryRegion valid.accepts
callback. We'll need this for subpage_accepts().
We could take the approach we used with the read and write
callbacks and add new a new _with_attrs version, but since there
are so few implementations of the accepts hook we just change
them all.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-9-peter.maydell@linaro.org
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to memory_region_access_valid().
Its callers either have an attrs value to hand, or don't care
and can use MEMTXATTRS_UNSPECIFIED.
The callsite in flatview_access_valid() is part of a recursive
loop flatview_access_valid() -> memory_region_access_valid() ->
subpage_accepts() -> flatview_access_valid(); we make it pass
MEMTXATTRS_UNSPECIFIED for now, until the next several commits
have plumbed an attrs parameter through the rest of the loop
and we can add an attrs parameter to flatview_access_valid().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-8-peter.maydell@linaro.org
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to flatview_extend_translation().
Its callers either have an attrs value to hand, or don't care
and can use MEMTXATTRS_UNSPECIFIED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-7-peter.maydell@linaro.org
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to address_space_access_valid().
Its callers either have an attrs value to hand, or don't care
and can use MEMTXATTRS_UNSPECIFIED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-6-peter.maydell@linaro.org
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to address_space_map().
Its callers either have an attrs value to hand, or don't care
and can use MEMTXATTRS_UNSPECIFIED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-5-peter.maydell@linaro.org
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to address_space_translate()
and address_space_translate_cached(). Callers either have an
attrs value to hand, or don't care and can use MEMTXATTRS_UNSPECIFIED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-4-peter.maydell@linaro.org
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to tb_invalidate_phys_addr().
Its callers either have an attrs value to hand, or don't care
and can use MEMTXATTRS_UNSPECIFIED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180521140402.23318-3-peter.maydell@linaro.org
MemoryRegionCache was reverted to "normal" address_space_* operations
for 2.9, due to lack of support for IOMMUs. Reinstate the
optimizations, caching only the IOMMU translation at address_cache_init
but not the IOMMU lookup and target AddressSpace translation are not
cached; now that MemoryRegionCache supports IOMMUs, it becomes more widely
applicable too.
The inlined fast path is defined in memory_ldst_cached.inc.h, while the
slow path uses memory_ldst.inc.c as before. The smaller fast path causes
a little code size reduction in MemoryRegionCache users:
hw/virtio/virtio.o text size before: 32373
hw/virtio/virtio.o text size after: 31941
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be used to process IOMMUs in a MemoryRegionCache. This
includes a small bugfix, in that the returned page_mask is now
correctly -1 if the IOMMU memory region maps the entire address
space directly. Previously, address_space_get_iotlb_entry would
return ~TARGET_PAGE_MASK.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare for extracting the IOMMU part to a separate function. Mostly
cosmetic; the only semantic change is that, if there is more than one
cascaded IOMMU and the second one fails to translate, *plen_out is now
adjusted according to the page mask of the first IOMMU.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are a couple places (one generic, one target specific) where we need
to get the host page size associated with a particular memory backend. I
have some upcoming code which will add another place which wants this. So,
for convenience, add a helper function to calculate this.
host_memory_backend_pagesize() returns the host pagesize for a given
HostMemoryBackend object.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_mempath_getpagesize() gets the effective (host side) page size for
a block of memory backed by an mmap()ed file on the host. It requires
the mem_path parameter to be non-NULL.
This ends up meaning all the callers need a different case for handling
anonymous memory (for memory-backend-ram or default memory with -mem-path
is not specified).
We can make all those callers a little simpler by having
qemu_mempath_getpagesize() accept NULL, and treat that as the anonymous
memory case.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
The string returned by object_property_get_str() is dynamically allocated.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <152231458624.69730.1752893648612848392.stgit@bahia.lan>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Use a flag on the RAMBlock to state whether it has the
UFFDIO_ZEROPAGE capability, use it when it's available.
This allows the use of postcopy on tmpfs as well as hugepage
backed files.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Utility to give the offset of a host pointer within a RAMBlock
(assuming we already know it's in that RAMBlock)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The choice of call to discard a block is getting more complicated
for other cases. We use fallocate PUNCH_HOLE in any file cases;
it works for both hugepage and for tmpfs.
We use the DONTNEED for non-hugepage cases either where they're
anonymous or where they're private.
Care should be taken when trying other backing files.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
With all targets defining CPU_RESOLVING_TYPE, refactor
cpu_parse_cpu_model(type, cpu_model) to parse_cpu_model(cpu_model)
so that callers won't have to know internal resolving cpu
type. Place it in exec.c so it could be called from both
target independed vl.c and *-user/main.c.
That allows us to stop abusing cpu type from
MachineClass::default_cpu_type
as resolver class in vl.c which were confusing part of
cpu_parse_cpu_model().
Also with new parse_cpu_model(), the last users of cpu_init()
in null-machine.c and bsd/linux-user targets could be switched
to cpu_create() API and cpu_init() API will be removed by
follow up patch.
With no longer users left remove MachineState::cpu_model field,
new code should use MachineState::cpu_type instead and
leave cpu_model parsing to generic code in vl.c.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1518000027-274608-5-git-send-email-imammedo@redhat.com>
[ehabkost: Fix bsd-user build error]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
address_space_rw is calling address_space_to_flatview but it can
be called outside the RCU lock. To fix it, transform flatview_rw
into address_space_rw, since flatview_rw is otherwise unused.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
address_space_map is calling address_space_to_flatview but it can
be called outside the RCU lock. The function itself is calling
rcu_read_lock/rcu_read_unlock, just in the wrong place, so the
fix is easy.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
address_space_access_valid is calling address_space_to_flatview but it can
be called outside the RCU lock. To fix it, push the rcu_read_lock/unlock
pair up from flatview_access_valid to address_space_access_valid.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
address_space_read is calling address_space_to_flatview but it can
be called outside the RCU lock. To fix it, push the rcu_read_lock/unlock
pair up from flatview_read_full to address_space_read's constant size
fast path and address_space_read_full.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
address_space_write is calling address_space_to_flatview but it can
be called outside the RCU lock. To fix it, push the rcu_read_lock/unlock
pair up from flatview_write to address_space_write.
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently only file backed memory backend can
be created with a "share" flag in order to allow
sharing guest RAM with other processes in the host.
Add the "share" flag also to RAM Memory Backend
in order to allow remapping parts of the guest RAM
to different host virtual addresses. This is needed
by the RDMA devices in order to remap non-contiguous
QEMU virtual addresses to a contiguous virtual address range.
Moved the "share" flag to the Host Memory base class,
modified phys_mem_alloc to include the new parameter
and a new interface memory_region_init_ram_shared_nomigrate.
There are no functional changes if the new flag is not used.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Stefan Weil <sw@weilnetz.de>
Conversions that aren't followed by exit() dropped, because they might
be inappropriate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180203084315.20497-14-armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
When mmap(2) the backend files, QEMU uses the host page size
(getpagesize(2)) by default as the alignment of mapping address.
However, some backends may require alignments different than the page
size. For example, mmap a device DAX (e.g., /dev/dax0.0) on Linux
kernel 4.13 to an address, which is 4K-aligned but not 2M-aligned,
fails with a kernel message like
[617494.969768] dax dax0.0: qemu-system-x86: dax_mmap: fail, unaligned vma (0x7fa37c579000 - 0x7fa43c579000, 0x1fffff)
Because there is no common approach to get such alignment requirement,
we add the 'align' option to 'memory-backend-file', so that users or
management utils, which have enough knowledge about the backend, can
specify a proper alignment via this option.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171211072806.2812-2-haozhong.zhang@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[ehabkost: fixed typo, fixed error_setg() format string]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
