This patch adds support for AArch64 in all the small corners of
linux-user (primarily in image loading and startup code).
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-22-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-11-git-send-email-john.rigby@linaro.org
[PMM:
* removed some unnecessary #defines from syscall.h
* catch attempts to use a 32 bit only cpu with aarch64-linux-user
* termios stuff moved into its own patch
* we specify our minimum uname version here now
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For newer target architectures, glibc can be picky about the kernel
version: for example, it will not run on an aarch64 system unless
the kernel reports itself as at least 3.8.0. Accommodate this by
enhancing the existing support for faking the kernel version so
that each target can optionally specify a minimum version: if
the user doesn't force a specific fake version then we will override
with the minimum required version only if the real host kernel
version is insufficient.
Use this facility to let aarch64 report a minimum of 3.8.0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-21-git-send-email-peter.maydell@linaro.org
Add the AArch64 termbits.h with all the target's termios related
constants and structures.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-20-git-send-email-peter.maydell@linaro.org
[PMM: split out from another patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-19-git-send-email-peter.maydell@linaro.org
[PMM: pulled out from another patch; don't use is_a64() here;
moved to linux-user from target-arm]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On ARM, linux-user emulation includes NWFPE support for emulating the
ancient FPA floating point coprocessor. This has long since been
superseded by VFP and is only required for legacy binaries. The
AArch64 linux-user target doesn't compile in NWFPE support, so make
sure the relevant code is protected by suitable ifdefs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-18-git-send-email-peter.maydell@linaro.org
This patch adds signal handling for AArch64. The code is based on the
respective source in the Linux kernel.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-17-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-10-git-send-email-john.rigby@linaro.org
[PMM: fixed style nits: tabs, long lines;
pulled target_signal.h in from a later patch; it fits better here]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some syscall handlers have special code for ARM enabled that we don't
need on AArch64. Exclude AArch64 in those cases. In other places we
can share struct definitions with other targets or have to provide our
own.
With this patch applied, most syscall definitions in linux-user should
be sound for AArch64.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-16-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-9-git-send-email-john.rigby@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AArch64 syscall definitions are all publicly available in the Linux
kernel. Let's add them to our linux-user emulation target, so that we
can easily handle AArch64 syscalls.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-15-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-8-git-send-email-john.rigby@linaro.org
[PMM: changes relating to cpu_loop() removed as they are superseded
by an earlier patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the main linux-user cpu loop for AArch64. Since AArch64
has a different system call interface, doesn't need to worry
about FPA emulation and may in the future keep the prefetch/data
abort information in different system registers, it's simplest
just to use a completely separate loop from the 32 bit ARM
target, rather than peppering it with ifdefs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-14-git-send-email-peter.maydell@linaro.org
32-bit ARM has a lot of different names for different types of CPUs it supports.
On AArch64, we don't have this, so we really don't want to execute the 32-bit
logic. Stub it out for AArch64 linux-user guests.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-13-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-7-git-send-email-john.rigby@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The m68k set_thread_area syscall implementation failed to set the
return value. Correctly set it zero, since this syscall will always
succeed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375093909-13653-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Rephrase code used in ARM sigreturn functions to avoid using
uninitialized variables. This fixes one genuine problem ('frame'
would not be initialized if we took the error-exit path because
our stackpointer was misaligned) and one which is clang being
alarmist (frame_addr wouldn't be initialized, though this is
harmless since unlock_user_struct ignores its second argument
in these cases; however since we don't generally make use of
this not-really-documented effect it's better avoided).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375095632-13735-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Silence a clang warning in a PPC signal return function:
/home/petmay01/linaro/qemu-from-laptop/qemu/linux-user/signal.c:4611:9: error: variable 'sr_addr' is used
uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (!lock_user_struct(VERIFY_READ, sc, sc_addr, 1))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/petmay01/linaro/qemu-from-laptop/qemu/linux-user/signal.c:4636:28: note: uninitialized use occurs here
unlock_user_struct(sr, sr_addr, 1);
^~~~~~~
/home/petmay01/linaro/qemu-from-laptop/qemu/linux-user/qemu.h:442:27: note: expanded from macro 'unlock_user_struct'
unlock_user(host_ptr, guest_addr, (copy) ? sizeof(*host_ptr) : 0)
^
This happens when we unlock a user struct which we never
attempted to lock. Strictly, clang is actually wrong here -- it
hasn't been able to spot that unlock_user_struct() doesn't use
its second argument if the first is NULL. However it doesn't
seem too unreasonable to demand that we pass in initialized
values to it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375095632-13735-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
sys_mremap missed 5th argument (new_address), which caused examples that
remap to a specific address to fail.
sys_splice missed 5th and 6th argument which caused different examples to
fail.
This change has an effect on MIPS target only.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* riku/linux-user-for-upstream: (21 commits)
linux-user: Handle compressed ISA encodings when processing MIPS exceptions
linux-user: Unlock mmap_lock when resuming guest from page_unprotect
linux-user: Reset copied CPUs in cpu_copy() always
linux-user: Fix epoll on ARM hosts
linux-user: fix segmentation fault passing with h2g(x) != x
linux-user: Fix pipe syscall return for SPARC
linux-user: Fix target_stat and target_stat64 for OpenRISC
linux-user: Avoid conditional cpu_reset()
configure: Make NPTL non-optional
linux-user: Enable NPTL for x86-64
linux-user: Add i386 TLS setter
linux-user: Clean up handling of clone() argument order
linux-user: Add missing 'break' in i386 get_thread_area syscall
linux-user: Enable NPTL for m68k
linux-user: Enable NPTL for SPARC targets
linux-user: Enable NPTL for OpenRISC
linux-user: Move includes of target-specific headers to end of qemu.h
configure: Enable threading for unicore32-linux-user
configure: Enable threading on all ppc and mips linux-user targets
configure: Don't say target_nptl="no" if there is no linux-user target
...
Conflicts:
linux-user/main.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Decode trap instructions during the handling of an EXCP_BREAK or EXCP_TRAP
according to the current ISA mode.
Signed-off-by: Kwok Cheung Yeung <kcy@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When a new thread gets created, we need to reset non arch specific state to
get the new CPU into clean state.
However this reset should happen before the arch specific CPU contents get
copied over. Otherwise we end up having clean reset state in our newly created
thread.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The epoll emulation uses data structures without packing them, so the
compiler might choose to add padding inside.
This patch makes the most offending one (target_epoll_event) a packed
structure to make sure we don't pad it by accident. ARM would pad it,
so declare the padding mandatory for ARM targets.
This fixes i386-on-ARM epoll emulation for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
SPARC is one of the CPUs which has a funny syscall ABI for the
pipe syscall; add it to the set of special cases in do_pipe().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
OpenRISC uses the asm-generic versions of target_stat and
target_stat64, but it was incorrectly using the x86/ARM/etc version
due to a misplaced defined(TARGET_OPENRISC). The previously unused
OpenRISC section of the ifdef ladder also defined an incorrect
target_stat and omitted the target_stat64 definition. Fix
target_stat, provide target_stat64, and add a comment noting that
these are the asm-generic versions for the benefit of future ports.
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Some CPUs reset as part of cpu_init(), some others were reset
afterwards, some not at all. While some targets didn't implement a
cpu_[state_]reset() function, QOM cpu_reset() is always available.
There's nothing wrong with resetting twice on startup, so drop
the #ifdef.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Now all linux-user targets support building with NPTL, we can make it
mandatory. This is a good idea because:
* NPTL is no longer new and experimental; it is completely standard
* in practice, linux-user without NPTL is nearly useless for
binaries built against non-ancient glibc
* it allows us to delete the rather untested code for handling
the non-NPTL configuration
Note that this patch leaves the CONFIG_USE_NPTL ifdefs in the
bsd-user codebase alone. This makes no change for bsd-user, since
our configure test for NPTL had a "#include <linux/futex.h>"
which means bsd-user would never have been compiled with
CONFIG_USE_NPTL defined, and it still is not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add x86-64 implementation of cpu_set_tls() (like the kernel, we
just have to call do_arch_prctl() to set FS); this allows us to
enable NPTL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We can easily set the TLS on i386. Add code to do so.
Signed-off-by: Alexander Graf <agraf@suse.de>
[PMM: also remove "target_nptl=no" line from configure, for
consistency with other patches in this series]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Linux manages to have three separate orderings of the arguments to
the clone() syscall on different architectures. In the kernel these
are selected via CONFIG_CLONE_BACKWARDS and CONFIG_CLONE_BACKWARDS2.
Clean up our implementation of this to use similar #define names
rather than a TARGET_* ifdef ladder.
This includes behaviour changes fixing bugs on cris, x86-64, m68k,
openrisc and unicore32. cris had explicit but wrong handling; the
others were just incorrectly using QEMU's default, which happened
to be the equivalent of CONFIG_CLONE_BACKWARDS. (unicore32 appears
to be broken in the mainline kernel in that it tries to use arg3 for
both parent_tidptr and newtls simultaneously -- we don't attempt
to emulate this bug...)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The i386 code for the get_thread_area syscall was missing a
'break' which meant it would have fallen through into the
implementation of the following syscall; add it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For m68k, per-thread data is a purely kernel construct with no
CPU level support. Implement it via a field in the TaskState structure,
used by cpu_set_tls() and the set_thread_area/get_thread_area
syscalls. This allows us to enable compilation with NPTL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Provide the missing cpu_set_tls(), and resolve the FIXME in
cpu_clone_regs() by clearing the carry flag for the child.
This allows us to turn on building with NPTL for SPARC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The OpenRISC kernel ignores CLONE_SETTLS in its copy_thread()
implementation, so a cpu_set_tls() implementation is a no-op.
cpu_clone_regs() was setting the syscall return value in the
wrong register -- it is gpr[11], not gpr[2]. With these two
things fixed, we can compile with NPTL enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The target-specific headers (target_cpu.h and target_signal.h)
might need to use the target-independent structure and function
definitions of qemu.h; so include them only at the bottom of
qemu.h, not the top.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
sys_futex has 6 arguments, and all of these need to be copied. Fix incorrect
declaration in the mips_syscall_args array.
This change fixes the cases where the 5th and 6th arguments have non-zero
value and have importance. An example is a Linux implementation of
pthread_cond_wait() function.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since commit 878096eeb2 (cpu: Turn
cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no
longer needed.
Add documentation and make the functions available through qemu/log.h
outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h
was not yet possible due to convoluted include paths, so that some
devices grow an implicit and unneeded dependency on qom/cpu.h for now.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: Richard Henderson <rth@twiddle.net>
[AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.
gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
The functions cpu_clone_regs() and cpu_set_tls() are not purely CPU
related -- they are specific to the TLS ABI for a a particular OS.
Move them into the linux-user/ tree where they belong.
target-lm32 had entirely unused implementations, since it has no
linux-user target; just drop them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Previous implementation has failed to take into account different value of
SOCK_NONBLOCK on target and host, and existence of SOCK_CLOEXEC.
The same conversion has to be applied both for do_socket and do_socketpair,
so the code has been isolated in a static inline function.
enum sock_type in linux-user/socket.h has been extended to include
TARGET_SOCK_CLOEXEC and TARGET_SOCK_NONBLOCK, similar to definition in libc.
The patch also includes necessary code style changes (tab to spaces) in the
header file since most of the file has been touched by this change.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Message-id: 1372639454-7560-1-git-send-email-petar.jovanovic@rt-rk.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Commit c0d472b12e accidentally dropped the definition of
__NR_SYS_utimensat even though its use is guarded by
CONFIG_UTIMENSAT, not CONFIG_ATFILE. Some older glibc don't
have utimensat() (even if they have the other *at() functions).
Fix this by correctly cleaning up the sys_utimensat()
implementation and #defines, so that we always provide the
syscall if needed whether we're doing it via glibc or not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1371743841-26110-1-git-send-email-peter.maydell@linaro.org
When translating between host and target signal numbers keep negative
numbers unchanged, avoiding access beyond array bounds.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 878v2b8sek.fsf@igel.home
This allows to pass the device name.
You can test this with the "route" command.
WITHOUT this patch:
$ sudo route add -net default gw 10.0.3.1 eth0
SIOCADDRT: Bad address
$ netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Ifa
10.0.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth
WITH this patch:
$ sudo route add -net default gw 10.0.3.1 eth0
$ netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Ifa
0.0.0.0 10.0.3.1 0.0.0.0 UG 0 0 0 eth
10.0.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Some applications use /proc/$$/... (where $$ is the own pid) instead of
/proc/self/... to refer to their own proc files. Extend the interception
for open and readlink to handle this case. Also, do the same interception
in readlinkat.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Make cpustats monitor command available unconditionally.
Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec()
arguments to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer depends on CPUArchState, so move it to qom/cpu.c.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
