Commit Graph

352 Commits

Author SHA1 Message Date
Daniel P. Berrange 6ab3fc32ea hw: replace most use of qemu_chr_fe_write with qemu_chr_fe_write_all
The qemu_chr_fe_write method will return -1 on EAGAIN if the
chardev backend write would block. Almost no callers of the
qemu_chr_fe_write() method check the return value, instead
blindly assuming data was successfully sent. In most cases
this will lead to silent data loss on interactive consoles,
but in some cases (eg RNG EGD) it'll just cause corruption
of the protocol being spoken.

We unfortunately can't fix the virtio-console code, due to
a bug in the Linux guest drivers, which would cause the
entire Linux kernel to hang if we delay processing of the
incoming data in any way. Fixing this requires first fixing
the guest driver to not hold spinlocks while writing to the
hvc device backend.

Fixes bug: https://bugs.launchpad.net/qemu/+bug/1586756

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-09-13 19:09:42 +02:00
Thomas Huth 1f8b56e7ce slirp: Rename "struct arphdr" to "struct slirp_arphdr"
struct arphdr is already used by the system headers on OpenBSD
and thus QEMU does not compile here anymore. Fix it by renaming
our struct to slirp_arphdr instead.

Reported-by: Brad Smith
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1471249494-17392-1-git-send-email-thuth@redhat.com
Buglink: https://bugs.launchpad.net/qemu/+bug/1613133
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-16 12:17:36 +01:00
Markus Armbruster df3c286c53 error: Strip trailing '\n' from error string arguments (again)
Commit 9af9e0f, 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but
they keep coming back.  checkpatch.pl tries to flag them since commit
5d596c2, but it's not very good at it.  Offenders tracked down with
Coccinelle script scripts/coccinelle/err-bad-newline.cocci, an updated
version of the script from commit 312fd5f.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1470224274-31522-2-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-08-08 09:00:44 +02:00
Markus Armbruster 175de52487 Clean up decorations and whitespace around header guards
Cleaned up with scripts/clean-header-guards.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:20:46 +02:00
Markus Armbruster 2a6a4076e1 Clean up ill-advised or unusual header guards
Cleaned up with scripts/clean-header-guards.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:20:46 +02:00
Markus Armbruster 121d07125b Clean up header guards that don't match their file name
Header guard symbols should match their file name to make guard
collisions less likely.  Offenders found with
scripts/clean-header-guards.pl -vn.

Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:19:16 +02:00
Markus Armbruster a9c94277f0 Use #include "..." for our own headers, <...> for others
Tracked down with an ugly, brittle and probably buggy Perl script.

Also move includes converted to <...> up so they get included before
ours where that's obviously okay.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:19:16 +02:00
Thomas Huth 7b143999f2 slirp: Add support for stateless DHCPv6
Provide basic support for stateless DHCPv6 (see RFC 3736) so
that guests can also automatically boot via IPv6 with SLIRP
(for IPv6 network booting, see RFC 5970 for details).

Tested with:

    qemu-system-ppc64 -nographic -vga none -boot n -net nic \
        -net user,ipv6=yes,ipv4=no,tftp=/path/to/tftp,bootfile=ppc64.img

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-07-03 23:59:42 +02:00
Thomas Huth e5857062a6 slirp: Remove superfluous memset() calls from the TFTP code
Commit fad7fb9ccd  ("Add IPv6 support to the TFTP code")
refactored some common code for preparing the mbuf into a new
function called tftp_prep_mbuf_data(). One part of this common
code is to do a "memset(m->m_data, 0, m->m_size);" for the related
buffer first. However, at two spots, the memset() was not removed
from the calling function, so it currently done twice in these code
paths. Thus let's delete these superfluous memsets in the calling
functions now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-07-03 23:59:42 +02:00
Samuel Thibault f7725df387 slirp: Add RDNSS advertisement
This adds the RDNSS option to IPv6 router advertisements, so that the guest
can autoconfigure the DNS server address.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>

---
Changes since last submission:
- Disable on windows, until we have support for it
2016-07-03 23:31:12 +02:00
Samuel Thibault ef763fa4bd slirp: Support link-local DNS addresses
They look like fe80::%eth0

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>

---
Changes since last submission:
- fix windows build
2016-07-03 23:29:13 +02:00
Samuel Thibault 1d17654e76 slirp: Add dns6 resolution
This makes get_dns_addr address family-agnostic, thus allowing to add the
IPv6 case.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-07-03 23:27:08 +02:00
Samuel Thibault 972487b878 slirp: Split get_dns_addr
Separate get_dns_addr into get_dns_addr_cached and get_dns_addr_resolv_conf
to make conversion to IPv6 easier.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-07-03 23:24:54 +02:00
Laurent Vivier 806956834a slirp: Use DIV_ROUND_UP
Replace (((n) + (d) - 1) /(d)) by DIV_ROUND_UP(n,d).

This patch is the result of coccinelle script
scripts/coccinelle/round.cocci

CC: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-06-07 18:19:25 +03:00
Peter Maydell 030c98aff1 all: Remove unnecessary glib.h includes
Remove glib.h includes, as it is provided by osdep.h.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-06-07 18:19:24 +03:00
Paolo Bonzini 87776ab72b qemu-common: stop including qemu/host-utils.h from qemu-common.h
Move it to the actual users.  There are some inclusions of
qemu/host-utils.h in headers, but they are all necessary.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:28 +02:00
Stefan Weil cb8d4c8f54 Fix some typos found by codespell
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-05-18 15:04:27 +03:00
Thomas Huth 9892663dc4 slirp: Clean up osdep.h related header inclusions
qemu/osdep.h is included in some headers twice - one time
should be sufficient.
Also remove the inclusion of time.h since that is already
done by osdep.h, too (this makes scripts/clean-includes
happy again).

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-05-16 21:01:16 +02:00
Thomas Huth 2cdc848eb5 slirp: Remove some unused code from slirp.h
These hunks are apparently not used anymore, so let's delete them.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-05-16 21:00:31 +02:00
Thomas Huth 5469feadb1 slirp: Remove obsolete backward-compatibility cruft
The slirp code does not use index() and gethostid() anymore,
so these parts can be removed without problems.
memmove() and strerror() should be available on each of the
supported platforms nowadays, too, so these wrappers are also
not needed anymore.
And we certainly also do not support Ultrix anymore, so no
need to keep the code for this platform anymore.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-05-16 20:58:47 +02:00
Thomas Huth cebee21aca slirp: Clean up slirp_config.h
There are a lot of unused #defines / #undefs in slirp_config.h,
which are apparently left-overs from the very early slirp code.
Since there is no more code that uses them, let's simply remove
them from our version of slirp.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-05-16 20:57:00 +02:00
Samuel Thibault 0d48dfedc5 slirp: fix guest network access with darwin host
On Darwin, connect, sendto and friends want the exact size of the sockaddr,
not more (and in particular, not sizeof(struct sockaddr_storaget))

This commit adds the sockaddr_size helper to be used when passing a sockaddr
size to such function, and makes use of it int sendto and connect calls.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-28 18:12:08 +01:00
Stefan Weil 3424c8a9c8 wxx: Fix broken TCP networking (regression)
It is broken since commit c619644067.

Reported-by: Michael Fritscher <michael@fritscher.net>
Tested-by: Michael Fritscher <michael@fritscher.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
2016-04-15 19:35:17 +02:00
Steven Luo 6625d83a6e slirp: handle deferred ECONNREFUSED on non-blocking TCP sockets
slirp currently only handles ECONNREFUSED in the case where connect()
returns immediately with that error; since we use non-blocking sockets,
most of the time we won't receive the error until we later try to read
from the socket.  Ensure that we deliver the appropriate RST to the
guest in this case.

Signed-off-by: Steven Luo <steven+qemu@steven676.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-04-07 13:02:05 +02:00
Edgar E. Iglesias 27d92ebc5e slirp: Propagate host TCP RST to the guest.
When the host aborts (RST) its side of a TCP connection we need to
propagate that RST to the guest. The current code can leave such guest
connections dangling forever. Spotted by Jason Wessel.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
[steven@steven676.net: coding style adjustments]
Signed-off-by: Steven Luo <steven+qemu@steven676.net>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-04-07 13:01:45 +02:00
Steven Luo bfb1ac1402 slirp: avoid use-after-free in slirp_pollfds_poll() if soread() returns an error
Samuel Thibault pointed out that it's possible that slirp_pollfds_poll()
will try to use a socket even after soread() returns an error, resulting
in an use-after-free if the socket was removed while handling the error.
Avoid this by refusing to continue to work with the socket in this case.

Signed-off-by: Steven Luo <steven+qemu@steven676.net>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-04-07 10:27:42 +02:00
Steven Luo b5ab677189 slirp: don't crash when tcp_sockclosed() is called with a NULL tp
Signed-off-by: Steven Luo <steven+qemu@steven676.net>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-04-07 10:27:22 +02:00
Samuel Thibault 0b11c03662 slirp: Allow disabling IPv4 or IPv6
Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and
IPv6-only network environments.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-04-01 17:51:55 +02:00
Thomas Huth eaf136f9a2 slirp: Fix migration from older versions of QEMU to the current one
While adding the IPv6 support, the commit eae303ff23
("slirp: Make Socket structure IPv6 compatible") changed the format of
the migration stream, without taking into account that we might still
receive an old migration stream layout when upgrading from QEMU version
2.5 (or older) to QEMU 2.6. Currently, QEMU bails out when doing a
migration from QEMU 2.5 to the recent master version when it has
been started with a "-net user,guestfwd=..." network. So let's fix
this by checking the version ID of the migration stream and by using
the old behavior if we've detected version 3 or less.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-04-01 00:05:06 +02:00
Peter Maydell 5b8e6b4cc2 slirp updates
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCgAGBQJW+bs1AAoJEOPlHOj7ay8dZd4P/1LapRGCErASZGdNWxVGxhTR
 jgM1eR7K2vjb2d4+nw5QVdI1jVnO2/hodbrIZVd0lxZtzyWzPSaa7Izc9Exl82is
 Zxqo4gvocDqNH2/9jEkruq5BtocCLTe3d2MJFqqr8kAaGD64qRATDO5ImItKKHZZ
 IDmKK4f/MpJTx1rGCcxqIjTH3eX+trrg78WH4ZMJQYS+s3+BiE1M1Wlj1xja6uji
 rSmXXOmF8VrO5VrafYXmAFnwftPLNoSRMoXYzB5MUAwQ8uHizrj6hbViUCOeo/y8
 1X9A/oOA4X0XiOWSIq/9FKGc8/tI0znCw1FN+axyyTvtqQ/NHgtDeibi6pM1IfV2
 sSsMveEX4y87UrTt+8U3ub3sSCXbkX56MUw+6xGrfSyrTgwr5QVJi9f9Ozsz2oBW
 rea4joPTXuu2TkXKMJIqF/Tsin+0eJ8wJIxIONISSi+QijyQGcxXyPsghvflTP28
 LIZJFdYeQjqm8vFpm1l3jXISrS9DoFIzRek+alJc+K4VQjONwrmuGTBxS82+oXiL
 c68YN5B48U5vO+XJNtlni7lJFtAx/ap54yWuPAvsUT4FXkaNA/gpeziVe7EXgiZ5
 oQfkOLkwNvEm7ej3ZY/Tti+3LRVFFd9yo339D5priFExccAS6V5qD547ISqsjCqY
 tq+vuAiwhfws/4kbr5Ao
 =+TFR
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into staging

slirp updates

# gpg: Signature made Tue 29 Mar 2016 00:16:05 BST using RSA key ID FB6B2F1D
# gpg: Good signature from "Samuel Thibault <samuel.thibault@gnu.org>"
# gpg:                 aka "Samuel Thibault <sthibault@debian.org>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@inria.fr>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@labri.fr>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@ens-lyon.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 900C B024 B679 31D4 0F82  304B D017 8C76 7D06 9EE6
#      Subkey fingerprint: F632 74CD C630 0873 CB3D  29D9 E3E5 1CE8 FB6B 2F1D

* remotes/thibault/tags/samuel-thibault:
  Rework ipv6 options
  Use C99 flexible array instead of 1-byte trailing array
  Avoid embedding struct mbuf in other structures
  slirp: send icmp6 errors when UDP send failed
  slirp: Fix memory leak on small incoming ipv4 packet

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-29 18:25:27 +01:00
Peter Maydell 1c3c8e9547 Use C99 flexible array instead of 1-byte trailing array
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-03-29 01:15:02 +02:00
Samuel Thibault 67e3eee454 Avoid embedding struct mbuf in other structures
struct mbuf uses a C99 open char array to allow inlining data. Inlining
this in another structure is however a GNU extension. The inlines used
so far in struct Slirp were actually only needed as head of struct
mbuf lists. This replaces these inline with mere struct quehead,
and use casts as appropriate.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-23 00:57:01 +01:00
Samuel Thibault c17c07231e slirp: send icmp6 errors when UDP send failed
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-22 22:52:09 +01:00
Samuel Thibault 99787f69cd slirp: Fix memory leak on small incoming ipv4 packet
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-22 22:51:56 +01:00
Veronia Bahaa f348b6d1a5 util: move declarations out of qemu-common.h
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)

Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:17 +01:00
Peter Maydell 4674da1c49 slirp/slirp.h: Remove now-empty #ifdefs
After automatic cleanup to remove unnecessary #includes of headers that
osdep.h provides, slirp.h has a few now unnecessary #ifdef/#endif pairs;
remove them.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1456237112-32662-2-git-send-email-peter.maydell@linaro.org
2016-03-16 12:48:11 +00:00
Thomas Huth fad7fb9ccd slirp: Add IPv6 support to the TFTP code
Add the handler code for incoming TFTP packets to udp6_input(),
and make sure that the TFTP code can send packets with both,
udp_output() and udp6_output() by introducing a wrapper function
called tftp_udp_output().

Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-03-15 17:05:34 +01:00
Yann Bordenave 7aac531ef2 qapi-schema, qemu-options & slirp: Adding Qemu options for IPv6 addresses
This patch adds parameters to manage some new options in the qemu -net
command.
Slirp IPv6 address, network prefix, and DNS IPv6 address can be given in
argument to the qemu command.
Defaults parameters are respectively fec0::2, fec0::, /64 and fec0::3.

Signed-off-by: Yann Bordenave <meow@meowstars.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15 10:35:25 +01:00
Guillaume Subiron 05061d8548 slirp: Adding IPv6 address for DNS relay
This patch adds an IPv6 address to the DNS relay. in6_equal_dns() is
developed using this Slirp attribute.
sotranslate_in/out/accept() are also updated to manage the IPv6 case so the
guest can be able to join the host using one of the Slirp addresses.

For now this only points to localhost. Further development will be needed to
automatically fetch the IPv6 address from resolv.conf, and announce this via
RDNSS.

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15 10:35:22 +01:00
Guillaume Subiron 3feea4447f slirp: Handle IPv6 in TCP functions
This patch adds IPv6 case in TCP functions refactored by the last
patches.
This also adds IPv6 pseudo-header in tcpiphdr structure.
Finally, tcp_input() is called by ip6_input().

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15 10:35:19 +01:00
Guillaume Subiron 1252cf40a8 slirp: Reindent after refactoring
No code change.

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15 10:35:17 +01:00
Guillaume Subiron 9dfbf250d2 slirp: Generalizing and neutralizing various TCP functions before adding IPv6 stuff
Basically, this patch adds some switch in various TCP functions to
prepare them for the IPv6 case.

To have something to "switch" in tcp_input() and tcp_respond(), a new
argument is used to give them the sa_family of the addresses they are
working on.

This patch does not include the entailed reindentation, to make proofread
easier. Reindentation is adressed in the following no-op patch.

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15 10:35:14 +01:00
Guillaume Subiron 98c63057d2 slirp: Factorizing tcpiphdr structure with an union
This patch factorizes the tcpiphdr structure to put the IPv4 fields in
an union, for addition of version 6 in further patch.
Using some macros, retrocompatibility of the existing code is assured.

This patch also fixes the SLIRP_MSIZE and margin computation in various
functions, and makes them compatible with the new tcpiphdr structure,
whose size will be bigger than sizeof(struct tcphdr) + sizeof(struct ip)

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15 10:35:11 +01:00
Guillaume Subiron 15d62af4b6 slirp: Adding IPv6 UDP support
This adds the sin6 case in the fhost and lhost unions and related macros.
It adds udp6_input() and udp6_output().
It adds the IPv6 case in sorecvfrom().
Finally, udp_input() is called by ip6_input().

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15 10:35:08 +01:00
Yann Bordenave fc6c9257c6 slirp: Adding ICMPv6 error sending
Adding icmp6_send_error to send ICMPv6 Error messages. This function is
simpler than the v4 version.
Adding some calls in various functions to send ICMP errors, when a
received packet is too big, or when its hop limit is 0.

Signed-off-by: Yann Bordenave <meow@meowstars.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15 10:35:04 +01:00
Yann Bordenave de40abfecf slirp: Fix ICMP error sending
Disambiguation : icmp_error is renamed into icmp_send_error, since it
doesn't manage errors, but only sends ICMP Error messages.

Signed-off-by: Yann Bordenave <meow@meowstars.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15 10:35:02 +01:00
Guillaume Subiron 0d6ff71ae3 slirp: Adding IPv6, ICMPv6 Echo and NDP autoconfiguration
This patch adds the functions needed to handle IPv6 packets. ICMPv6 and
NDP headers are implemented.

Slirp is now able to send NDP Router or Neighbor Advertisement when it
receives Router or Neighbor Solicitation. Using a 64bit-sized IPv6
prefix, the guest is now able to perform stateless autoconfiguration
(SLAAC) and to compute its IPv6 address.

This patch adds an ndp_table, mainly inspired by arp_table, to keep an
NDP cache and manage network address resolution.
Slirp regularly sends NDP Neighbor Advertisement, as recommended by the
RFC, to make the guest refresh its route.

This also adds ip6_cksum() to compute ICMPv6 checksums using IPv6
pseudo-header.

Some #define ETH_* are moved upper in slirp.h to make them accessible to
other slirp/*.h

Signed-off-by: Guillaume Subiron <maethor@subiron.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15 10:35:00 +01:00
Daniel P. Berrange b16a44e13e osdep: remove use of socket_error() from all code
Now that QEMU wraps the Win32 sockets methods to automatically
set errno upon failure, there is no reason for callers to use
the socket_error() method. They can rely on accessing errno
even on Win32. Remove all use of socket_error() from general
code, leaving it as a static method in oslib-win32.c only.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-10 17:19:34 +00:00
Daniel P. Berrange a2d96af4bb osdep: add wrappers for socket functions
The windows socket functions look identical to the normal POSIX
sockets functions, but instead of setting errno, the caller needs
to call WSAGetLastError(). QEMU has tried to deal with this
incompatibility by defining a socket_error() method that callers
must use that abstracts the difference between WSAGetLastError()
and errno.

This approach is somewhat error prone though - many callers of
the sockets functions are just using errno directly because it
is easy to forget the need use a QEMU specific wrapper. It is
not always immediately obvious that a particular function will
in fact call into Windows sockets functions, so the dev may not
even realize they need to use socket_error().

This introduces an alternative approach to portability inspired
by the way GNULIB fixes portability problems. We use a macro to
redefine the original socket function names to refer to a QEMU
wrapper function. The wrapper function calls the original Win32
sockets method and then sets errno from the WSAGetLastError()
value.

Thus all code can simply call the normal POSIX sockets APIs are
have standard errno reporting on error, even on Windows. This
makes the socket_error() method obsolete.

We also bring closesocket & ioctlsocket into this approach. Even
though they are non-standard Win32 names, we can't wrap the normal
close/ioctl methods since there's no reliable way to distinguish
between a file descriptor and HANDLE in Win32.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-10 17:19:07 +00:00
Peter Maydell 30456d5ba3 all: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
2016-02-23 12:43:05 +00:00