Commit Graph

438 Commits

Author SHA1 Message Date
Anthony Liguori 90c45b3031 Merge remote-tracking branch 'kwolf/for-anthony' into staging
* kwolf/for-anthony: (32 commits)
  osdep: Less restrictive F_SEFL in qemu_dup_flags()
  qemu-iotests: add testcases for mirroring on-source-error/on-target-error
  qmp: add pull_event function
  mirror: add support for on-source-error/on-target-error
  iostatus: forward block_job_iostatus_reset to block job
  qemu-iotests: add mirroring test case
  mirror: implement completion
  qmp: add drive-mirror command
  mirror: introduce mirror job
  block: introduce BLOCK_JOB_READY event
  block: add block-job-complete
  block: rename block_job_complete to block_job_completed
  block: export dirty bitmap information in query-block
  block: introduce new dirty bitmap functionality
  block: add bdrv_open_backing_file
  block: add bdrv_query_stats
  block: add bdrv_query_info
  qemu-config: Add new -add-fd command line option
  monitor: Prevent removing fd from set during init
  monitor: Enable adding an inherited fd to an fd set
  ...

Conflicts:
	vl.c

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-29 10:34:05 -05:00
Paolo Bonzini 3bd293c3fd iostatus: forward block_job_iostatus_reset to block job
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24 10:26:22 +02:00
Paolo Bonzini b9a9b3a462 block: export dirty bitmap information in query-block
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24 10:26:19 +02:00
Paolo Bonzini 1755da16e3 block: introduce new dirty bitmap functionality
Assert that write_compressed is never used with the dirty bitmap.
Setting the bits early is wrong, because a coroutine might concurrently
examine them and copy incomplete data from the source.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24 10:26:19 +02:00
Paolo Bonzini 9156df12a4 block: add bdrv_open_backing_file
Mirroring runs without the backing file so that it can be copied outside
QEMU.  However, we need to add it at the time the job is completed and
QEMU switches to the target.  Factor out the common bits of opening an
image and completing a mirroring operation.

The new function does not assume that the file is closed immediately after
it returns failure, so it keeps the BDRV_O_NO_BACKING flag up-to-date.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24 10:26:19 +02:00
Paolo Bonzini 9887b61661 block: add bdrv_query_stats
qmp_query_blockstat cannot have errors, remove the Error argument and
create a new public function bdrv_query_stats out of it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24 10:26:19 +02:00
Paolo Bonzini ac84adac48 block: add bdrv_query_info
Extract it out of the implementation of "info block".

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24 10:26:19 +02:00
Luiz Capitulino 80168bff43 block: bdrv_create(): don't leak cco.filename on error
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24 10:26:19 +02:00
Jeff Cody b1b1d783ea block: make bdrv_find_backing_image compare canonical filenames
Currently, bdrv_find_backing_image compares bs->backing_file with
what is passed in as a backing_file name.  Mismatches may occur,
however, when bs->backing_file and backing_file are not both
absolute or relative.

Use path_combine() to make sure any relative backing filenames are
relative to the current image filename being searched, and then use
realpath() to make all comparisons based on absolute filenames.

If either backing_file or bs->backing_file is determine to be a
protocol, then no filename normalization is performed.

This also changes bdrv_find_backing_image to no longer be recursive,
but iterative.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24 10:26:18 +02:00
Paolo Bonzini d7d512f609 block: add close notifiers
The first user of close notifiers will be the embedded NBD server.
It would be possible to use them to do some of the ad hoc processing
(e.g. for block jobs and I/O limits) that is currently done by
bdrv_close.

Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-23 22:39:32 +02:00
Paolo Bonzini 3cbc002c34 block: prepare code for adding block notifiers
There is no reason in principle to skip job cancellation and draining
of pending I/O when there is no medium in the disk.  Do these unconditionally,
which also prepares the code for the next patch.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-23 22:39:32 +02:00
Jim Meyering c2cba3d931 block: avoid buffer overrun by using pstrcpy, not strncpy
Also, use PATH_MAX, rather than the arbitrary 1024.
Using PATH_MAX is more consistent with other filename-related
variables in this file, like backing_filename and tmp_filename.

Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-05 07:58:36 -05:00
Paolo Bonzini 32c81a4a6e block: introduce block job error
The following behaviors are possible:

'report': The behavior is the same as in 1.1.  An I/O error,
respectively during a read or a write, will complete the job immediately
with an error code.

'ignore': An I/O error, respectively during a read or a write, will be
ignored.  For streaming, the job will complete with an error and the
backing file will be left in place.  For mirroring, the sector will be
marked again as dirty and re-examined later.

'stop': The job will be paused and the job iostatus will be set to
failed or nospace, while the VM will keep running.  This can only be
specified if the block device has rerror=stop and werror=stop or enospc.

'enospc': Behaves as 'stop' for ENOSPC errors, 'report' for others.

In all cases, even for 'report', the I/O error is reported as a QMP
event BLOCK_JOB_ERROR, with the same arguments as BLOCK_IO_ERROR.

It is possible that while stopping the VM a BLOCK_IO_ERROR event will be
reported and will clobber the event from BLOCK_JOB_ERROR, or vice versa.
This is not really avoidable since stopping the VM completes all pending
I/O requests.  In fact, it is already possible now that a series of
BLOCK_IO_ERROR events are reported with rerror=stop, because vm_stop
calls bdrv_drain_all and this can generate further errors.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 19:40:56 +02:00
Paolo Bonzini 3e1caa5f76 iostatus: reorganize io error code
Move the common part of IDE/SCSI/virtio error handling to the block
layer.  The new function bdrv_error_action subsumes all three of
bdrv_emit_qmp_error_event, vm_stop, bdrv_iostatus_set_err.

The same scheme will be used for errors in block jobs.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 19:40:56 +02:00
Paolo Bonzini 1ceee0d5cc iostatus: change is_read to a bool
Do this while we are touching this part of the code, before introducing
more uses of "int is_read".

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 19:40:56 +02:00
Paolo Bonzini 92aa5c6d77 iostatus: move BlockdevOnError declaration to QAPI
This will let block-stream reuse the enum.  Places that used the enums
are renamed accordingly.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 19:40:26 +02:00
Paolo Bonzini ff06f5f351 iostatus: rename BlockErrorAction, BlockQMPEventAction
We want to remove knowledge of BLOCK_ERR_STOP_ENOSPC from drivers;
drivers should only be told whether to stop/report/ignore the error.
On the other hand, we want to keep using the nicer BlockErrorAction
name in the drivers.  So rename the enums, while leaving aside the
names of the enum values for now.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 19:14:32 +02:00
Paolo Bonzini 2f0c9fe64c block: move job APIs to separate files
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 19:14:26 +02:00
Jeff Cody 79fac5680d block: helper function, to find the base image of a chain
This is a simple helper function, that will return the base image
of a given image chain.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 18:23:44 +02:00
Jeff Cody 6ebdcee2d8 block: add support functions for live commit, to find and delete images.
Add bdrv_find_overlay(), and bdrv_drop_intermediate().

bdrv_find_overlay():  given 'bs' and the active (topmost) BDS of an image chain,
                    find the image that is the immediate top of 'bs'

bdrv_drop_intermediate():
                    Given 3 BDS (active, top, base), drop images above
                    base up to and including top, and set base to be the
                    backing file of top's overlay node.

                    E.g., this converts:

                    bottom <- base <- intermediate <- top <- active

                    to

                    bottom <- base <- active

Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 18:22:44 +02:00
Jeff Cody dc1c13d969 block: remove keep_read_only flag from BlockDriverState struct
The keep_read_only flag is no longer used, in favor of the bdrv
flag BDRV_O_ALLOW_RDWR.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-24 15:15:13 +02:00
Jeff Cody 0bce597d6e block: convert bdrv_commit() to use bdrv_reopen()
Currently, bdrv_commit() reopens images r/w itself, via risky
_delete() and _open() calls. Use the new safe method for drive reopen.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-24 15:15:12 +02:00
Jeff Cody e971aa1273 block: Framework for reopening files safely
This is based on Supriya Kannery's bdrv_reopen() patch series.

This provides a transactional method to reopen multiple
images files safely.

Image files are queue for reopen via bdrv_reopen_queue(), and the
reopen occurs when bdrv_reopen_multiple() is called.  Changes are
staged in bdrv_reopen_prepare() and in the equivalent driver level
functions.  If any of the staged images fails a prepare, then all
of the images left untouched, and the staged changes for each image
abandoned.

Block drivers are passed a reopen state structure, that contains:
    * BDS to reopen
    * flags for the reopen
    * opaque pointer for any driver-specific data that needs to be
      persistent from _prepare to _commit/_abort
    * reopen queue pointer, if the driver needs to queue additional
      BDS for a reopen

Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-24 15:15:11 +02:00
Jeff Cody 55b110f24e block: make bdrv_set_enable_write_cache() modify open_flags
bdrv_set_enable_write_cache() sets the bs->enable_write_cache flag,
but without the flag recorded in bs->open_flags, then next time
a reopen() is performed the enable_write_cache setting may be
inadvertently lost.

This will set the flag in open_flags, so it is preserved across
reopens.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-24 15:15:11 +02:00
Jeff Cody be028adced block: correctly set the keep_read_only flag
I believe the bs->keep_read_only flag is supposed to reflect
the initial open state of the device. If the device is initially
opened R/O, then commit operations, or reopen operations changing
to R/W, are prohibited.

Currently, the keep_read_only flag is only accurate for the active
layer, and its backing file. Subsequent images end up always having
the keep_read_only flag set.

For instance, what happens now:

[  base  ]  kro = 1, ro = 1
    |
    v
[ snap-1 ]  kro = 1, ro = 1
    |
    v
[ snap-2 ]  kro = 0, ro = 1
    |
    v
[ active ]  kro = 0, ro = 0

What we want:

[  base  ]  kro = 0, ro = 1
    |
    v
[ snap-1 ]  kro = 0, ro = 1
    |
    v
[ snap-2 ]  kro = 0, ro = 1
    |
    v
[ active ]  kro = 0, ro = 0

Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-24 15:15:11 +02:00
Dunrong Huang fe235a06e1 block: Don't forget to delete temporary file
The caller would not delete temporary file after failed get_tmp_filename().

Signed-off-by: Dunrong Huang <riegamaths@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-12 15:50:09 +02:00
Pavel Hrdina 9ca111544c block: fix block tray status
The tray status should change also if you eject empty block device.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-12 15:50:09 +02:00
Kevin Wolf d4c8232923 block: Flush parent to OS with cache=unsafe
Commit 29cdb251 already added a comment that no unnecessary flushes to
disk will occur, this patch makes the code even get to the point of the
comment. This is mostly theoretical because in practice we only stack
one format on top of one protocol, the former implementing flush_to_os
and the latter only flush_to_disk. It starts to matter when drivers that
are not on top implement flush_to_os.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-08-15 15:14:43 +02:00
Luiz Capitulino c75a1a8a5a qmp: query-block: add 'encryption_key_missing' field
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2012-08-13 13:20:06 -03:00
Benoît Canet 2e3e331710 block: Use bdrv_get_backing_file_depth()
Use the dedicated counting function in qmp_query_block in order to
propagate the backing file depth to HMP and add backing_file_depth
to qmp-commands.hx

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-08-03 10:10:51 -03:00
Benoît Canet f198fd1c9a block: create bdrv_get_backing_file_depth()
Create bdrv_get_backing_file_depth() in order to be able to show
in QMP and HMP how many ancestors backing an image a block device
have.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-08-03 10:10:38 -03:00
Blue Swirl 0ed8b6f67f Avoid returning void
It's silly and non-conforming to standards to return void,
don't do it.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-07-28 09:23:11 +00:00
Markus Armbruster 2b584959ed block: Geometry and translation hints are now useless, purge them
There are two producers of these hints: drive_init() on behalf of
-drive, and hd_geometry_guess().

The only consumer of the hint is hd_geometry_guess().

The callers of hd_geometry_guess() call it only when drive_init()
didn't set the hints.  Therefore, drive_init()'s hints are never used.

Thus, hd_geometry_guess() only ever sees hints it produced itself in a
prior call.  Only the first call computes something, subsequent calls
just repeat the first call's results.  However, hd_geometry_guess() is
never called more than once: the device models don't, and the block
device is destroyed on unplug.  Thus, dropping the repeat feature
doesn't break anything now.

If a block device wasn't destroyed on unplug and could be reused with
a new device, then repeating old results would be wrong.  Thus,
dropping the repeat feature prevents future breakage.

This renders the hints unused.  Purge them from the block layer.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17 16:48:31 +02:00
Markus Armbruster 9db1c0f7a9 hd-geometry: Move disk geometry guessing back from block.c
Commit f3d54fc4 factored it out of hw/ide.c for reuse.  Sensible,
except it was put into block.c.  Device-specific functionality should
be kept in device code, not the block layer.  Move it to
hw/hd-geometry.c, and make stylistic changes required to keep
checkpatch.pl happy.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17 16:48:30 +02:00
Markus Armbruster 61a8d649ff fdc: Move floppy geometry guessing back from block.c
Commit 5bbdbb46 moved it to block.c because "other geometry guessing
functions already reside in block.c".  Device-specific functionality
should be kept in device code, not the block layer.  Move it back.

Disk geometry guessing is still in block.c.  To be moved out in a
later patch series.

Bonus: the floppy type used in pc_cmos_init() now obviously matches
the one in the FDrive.  Before, we relied on
bdrv_get_floppy_geometry_hint() picking the same type both in
fd_revalidate() and in pc_cmos_init().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-17 16:48:29 +02:00
Anthony Liguori 23797df3d9 Merge remote-tracking branch 'mjt/mjt-iov2' into staging
* mjt/mjt-iov2:
  rewrite iov_send_recv() and move it to iov.c
  cleanup qemu_co_sendv(), qemu_co_recvv() and friends
  export iov_send_recv() and use it in iov_send() and iov_recv()
  rename qemu_sendv to iov_send, change proto and move declarations to iov.h
  change qemu_iovec_to_buf() to match other to,from_buf functions
  consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent
  allow qemu_iovec_from_buffer() to specify offset from which to start copying
  consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset()
  rewrite iov_* functions
  change iov_* function prototypes to be more appropriate
  virtio-serial-bus: use correct lengths in control_out() message

Conflicts:
	tests/Makefile

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-07-09 12:35:06 -05:00
Markus Armbruster 07d27a442e block: Factor bdrv_read_unthrottled() out of guess_disk_lchs()
To prepare move of guess_disk_lchs() into hw/, where it poking
BlockDriverState member io_limits_enabled directly would be unclean.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09 17:21:02 +02:00
Markus Armbruster 1f69c2b022 fdc: Drop broken code for user-defined floppy geometry
bdrv_get_floppy_geometry_hint() fails to store through its parameter
drive when bs has a geometry hint.  Makes fd_revalidate() assign
random crap to drv->drive.

Has been broken that way for ages.  Harmless, because:

* The only way to set a geometry hint is -drive if=none,cyls=...
  Since commit c219331e, probably unintentional.

* The only use of drv->drive is as argument to another
  bdrv_get_floppy_geometry_hint().  Which doesn't use it, since the
  geometry hint is still there.

Drop the broken code, ignore -drive parameter cyls, heads and secs for
floppies even with if=none, just like before commit c219331e.  Matches
-help, which explains cyls, heads, secs as "hard disk physical
geometry".

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09 15:53:03 +02:00
Paolo Bonzini 4ddc07cac2 block: introduce bdrv_swap, implement bdrv_append on top of it
The new function can be made a bit nicer than bdrv_append.  It swaps the
whole contents, and then swaps back (using the usual t=a;a=b;b=t idiom)
the fields that need to stay on top.  Thus, it does not need explicit
bdrv_detach_dev, bdrv_iostatus_disable, etc.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09 15:53:02 +02:00
Paolo Bonzini a9fc4408e3 block: copy over job and dirty bitmap fields in bdrv_append
While these should not be in use at the time a transaction is started,
a command in the prepare phase of a transaction might have added them,
so they need to be brought over.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-07-09 15:53:02 +02:00
Markus Armbruster f8d6bba1c1 block: Replace bdrv_get_format() by bdrv_get_format_name()
So callers don't need to know anything about maximum name length.
Returning a pointer is safe, because the name string lives as long as
the block driver it names, and block drivers don't die.

Requested by Peter Maydell.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-15 14:03:43 +02:00
Paolo Bonzini e1e9b0aca0 block: always open drivers in writeback mode
Formats are entirely in charge of flushes for metadata writes.  For
guest-initiated writes, a writethrough cache is faked in the block layer.
So we can always open in writeback mode.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-15 14:03:43 +02:00
Paolo Bonzini 425b01487a block: add bdrv_set_enable_write_cache
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-15 14:03:43 +02:00
Paolo Bonzini c4a248a138 block: copy enable_write_cache in bdrv_append
Because the guest will be able to flip enable_write_cache, the actual
state may not match what is used to open the new snapshot.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-15 14:03:43 +02:00
Paolo Bonzini f05fa4ad03 block: flush in writethrough mode after writes
We want to make the formats handle their own flushes
autonomously, while keeping for guests the ability to use a writethrough
cache.  Since formats will write metadata via bs->file, bdrv_co_do_writev
is the only place where we need to add a flush.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-15 14:03:43 +02:00
Markus Armbruster c843328783 block: New bdrv_get_flags()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-15 14:03:43 +02:00
Kevin Wolf 4534ff5426 qemu-img check -r for repairing images
The QED block driver already provides the functionality to not only
detect inconsistencies in images, but also fix them. However, this
functionality cannot be manually invoked with qemu-img, but the
check happens only automatically during bdrv_open().

This adds a -r switch to qemu-img check that allows manual invocation
of an image repair.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-15 14:03:42 +02:00
Paolo Bonzini 188a7bbf94 stream: move is_allocated_above to block.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-06-15 14:03:42 +02:00
Michael Tokarev d5e6b1619c change qemu_iovec_to_buf() to match other to,from_buf functions
It now allows specifying offset within qiov to start from and
amount of bytes to copy.  Actual implementation is just a call
to iov_to_buf().

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2012-06-11 23:12:11 +04:00
Michael Tokarev 1b093c480a consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent
qemu_iovec_concat() is currently a wrapper for
qemu_iovec_copy(), use the former (with extra
"0" arg) in a few places where it is used.

Change skip argument of qemu_iovec_copy() from
uint64_t to size_t, since size of qiov itself
is size_t, so there's no way to skip larger
sizes.  Rename it to soffset, to make it clear
that the offset is applied to src.

Also change the only usage of uint64_t in
hw/9pfs/virtio-9p.c, in v9fs_init_qiov_from_pdu() -
all callers of it actually uses size_t too,
not uint64_t.

One added restriction: as for all other iovec-related
functions, soffset must point inside src.

Order of argumens is already good:
 qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
                   int c, size_t bytes)
vs:
 qemu_iovec_concat(QEMUIOVector *dst,
                   QEMUIOVector *src,
                   size_t soffset, size_t sbytes)
(note soffset is after _src_ not dst, since it applies to src;
for memset it applies to qiov).

Note that in many places where this function is used,
the previous call is qemu_iovec_reset(), which means
many callers actually want copy (replacing dst content),
not concat.  So we may want to add a wrapper like
qemu_iovec_copy() with the same arguments but which
calls qemu_iovec_reset() before _concat().

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2012-06-11 23:12:11 +04:00