For block host devices, I/O can happen through either the kernel file
descriptor I/O system calls (preadv/pwritev, io_submit, io_uring)
or the SCSI passthrough ioctl SG_IO.
In the latter case, the size of each transfer can be limited by the
HBA, while for file descriptor I/O the kernel is able to split and
merge I/O in smaller pieces as needed. Applying the HBA limits to
file descriptor I/O results in more system calls and suboptimal
performance, so this patch splits the max_transfer limit in two:
max_transfer remains valid and is used in general, while max_hw_transfer
is limited to the maximum hardware size. max_hw_transfer can then be
included by the scsi-generic driver in the block limits page, to ensure
that the stricter hardware limit is used.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I/O to a disk via read/write is not limited by the number of segments allowed
by the host adapter; the kernel can split requests if needed, and the limit
imposed by the host adapter can be very low (256k or so) to avoid that SG_IO
returns EINVAL if memory is heavily fragmented.
Since this value is only interesting for SG_IO-based I/O, do not include
it in the max_transfer and only take it into account when patching the
block limits VPD page in the scsi-generic device.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Even though it was only called for devices that have bs->sg set (which
must be character devices), sg_get_max_segments looked at /sys/dev/block
which only works for block devices.
On Linux the sg driver has its own way to provide the maximum number of
iovecs in a scatter/gather list, so add support for it. The block device
path is kept because it will be reinstated in the next patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
A flush failure is a critical failure scenario for some operations.
For example, it will prevent migration from completing, as it will
make vm_stop() report an error. Thus it is important to have a
trace point present for debugging.
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When fdatasync() fails on a file backend we set a flag that
short-circuits any future attempts to call fdatasync(). The
first failure returns the true errno, but the later short-
circuited calls return a generic EIO. The latter is unhelpful
because fdatasync() can return a variety of errnos, including
EACCESS.
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If fallocate(... FALLOC_FL_ZERO_RANGE ...) returns EINVAL, it's likely
an indication that the file system is buggy and does not implement
unaligned accesses right. We still might be lucky with the other
fallback fallocate() calls later in this function, though, so we should
not return immediately and try the others first.
Since FALLOC_FL_ZERO_RANGE could also return EINVAL if the file descriptor
is not a regular file, we ignore this filesystem bug silently, without
printing an error message for the user.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210527172020.847617-3-thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A customer reported that running
qemu-img convert -t none -O qcow2 -f qcow2 input.qcow2 output.qcow2
fails for them with the following error message when the images are
stored on a GPFS file system :
qemu-img: error while writing sector 0: Invalid argument
After analyzing the strace output, it seems like the problem is in
handle_aiocb_write_zeroes(): The call to fallocate(FALLOC_FL_PUNCH_HOLE)
returns EINVAL, which can apparently happen if the file system has
a different idea of the granularity of the operation. It's arguably
a bug in GPFS, since the PUNCH_HOLE mode should not result in EINVAL
according to the man-page of fallocate(), but the file system is out
there in production and so we have to deal with it. In commit 294682cc3a
("block: workaround for unaligned byte range in fallocate()") we also
already applied the a work-around for the same problem to the earlier
fallocate(FALLOC_FL_ZERO_RANGE) call, so do it now similar with the
PUNCH_HOLE call. But instead of silently catching and returning
-ENOTSUP (which causes the caller to fall back to writing zeroes),
let's rather inform the user once about the buggy file system and
try the other fallback instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210527172020.847617-2-thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move bdrv_reopen_multiple to new paradigm of permission update:
first update graph relations, then do refresh the permissions.
We have to modify reopen process in file-posix driver: with new scheme
we don't have prepared permissions in raw_reopen_prepare(), so we
should reconfigure fd in raw_check_perm(). Still this seems more native
and simple anyway.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-31-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'host_device' and 'host_cdrom' drivers must be used instead.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It's better to pass &error_abort than just assert that result is 0: on
crash, we'll immediately see the reason in the backtrace.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201211183934.169161-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix iotest 206 fallout]
Signed-off-by: Eric Blake <eblake@redhat.com>
When a call to fcntl(2) for the purpose of adding file locks fails
with an error other than EAGAIN or EACCES, report the error returned
by fcntl.
EAGAIN or EACCES are elided as they are considered to be common
failures, indicating that a conflicting lock is held by another
process.
No errors are elided when removing file locks.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210113164447.2545785-1-david.edmondson@oracle.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We'll need a separate function, which will only "mark" request
serialising with specified align but not wait for conflicting
requests. So, it will be like old bdrv_mark_request_serialising(),
before merging bdrv_wait_serialising_requests_locked() into it.
To reduce the possible mess, let's do the following:
Public function that does both marking and waiting will be called
bdrv_make_request_serialising, and private function which will only
"mark" will be called tracked_request_set_serialising().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201021145859.11201-6-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
local_err is not initialized to NULL, it will cause a assert error as below:
qemu/util/error.c:59: error_setv: Assertion `*errp == NULL' failed.
Fixes: c644751069
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Message-Id: <20201023061218.2080844-8-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We are going to modify block layer to work with 64bit requests. And
first step is moving to int64_t type for both offset and bytes
arguments in all block request related functions.
It's mostly safe (when widening signed or unsigned int to int64_t), but
switching from uint64_t is questionable.
So, let's first establish the set of requests we want to work with.
First signed int64_t should be enough, as off_t is signed anyway. Then,
obviously offset + bytes should not overflow.
And most interesting: (offset + bytes) being aligned up should not
overflow as well. Aligned to what alignment? First thing that comes in
mind is bs->bl.request_alignment, as we align up request to this
alignment. But there is another thing: look at
bdrv_mark_request_serialising(). It aligns request up to some given
alignment. And this parameter may be bdrv_get_cluster_size(), which is
often a lot greater than bs->bl.request_alignment.
Note also, that bdrv_mark_request_serialising() uses signed int64_t for
calculations. So, actually, we already depend on some restrictions.
Happily, bdrv_get_cluster_size() returns int and
bs->bl.request_alignment has 32bit unsigned type, but defined to be a
power of 2 less than INT_MAX. So, we may establish, that INT_MAX is
absolute maximum for any kind of alignment that may occur with the
request.
Note, that bdrv_get_cluster_size() is not documented to return power
of 2, still bdrv_mark_request_serialising() behaves like it is.
Also, backup uses bdi.cluster_size and is not prepared to it not being
power of 2.
So, let's establish that Qemu supports only power-of-2 clusters and
alignments.
So, alignment can't be greater than 2^30.
Finally to be safe with calculations, to not calculate different
maximums for different nodes (depending on cluster size and
request_alignment), let's simply set QEMU_ALIGN_DOWN(INT64_MAX, 2^30)
as absolute maximum bytes length for Qemu. Actually, it's not much less
than INT64_MAX.
OK, then, let's apply it to block/io.
Let's consider all block/io entry points of offset/bytes:
4 bytes/offset interface functions: bdrv_co_preadv_part(),
bdrv_co_pwritev_part(), bdrv_co_copy_range_internal() and
bdrv_co_pdiscard() and we check them all with bdrv_check_request().
We also have one entry point with only offset: bdrv_co_truncate().
Check the offset.
And one public structure: BdrvTrackedRequest. Happily, it has only
three external users:
file-posix.c: adopted by this patch
write-threshold.c: only read fields
test-write-threshold.c: sets obviously small constant values
Better is to make the structure private and add corresponding
interfaces.. Still it's not obvious what kind of interface is needed
for file-posix.c. Let's keep it public but add corresponding
assertions.
After this patch we'll convert functions in block/io.c to int64_t bytes
and offset parameters. We can assume that offset/bytes pair always
satisfy new restrictions, and make
corresponding assertions where needed. If we reach some offset/bytes
point in block/io.c missing bdrv_check_request() it is considered a
bug. As well, if block/io.c modifies a offset/bytes request, expanding
it more then aligning up to request_alignment, it's a bug too.
For all io requests except for discard we keep for now old restriction
of 32bit request length.
iotest 206 output error message changed, as now test disk size is
larger than new limit. Add one more test case with new maximum disk
size to cover too-big-L1 case.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We should not set overlap_bytes:
1. Don't worry: it is calculated by bdrv_mark_request_serialising() and
will be equal to or greater than bytes anyway.
2. If the request was already aligned up to some greater alignment,
than we may break things: we reduce overlap_bytes, and further
bdrv_mark_request_serialising() may not help, as it will not restore
old bigger alignment.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The scenario is that when accessing a volume on an NFS filesystem
without supporting the file lock, Qemu will complain "Failed to lock
byte 100", even when setting the file.locking = off.
We should do file lock related operations only when the file.locking is
enabled, otherwise, the syscall of 'fcntl' will return non-zero.
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <1607341446-85506-1-git-send-email-fengli@smartx.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On Linux, fallocate(fd, FALLOC_FL_PUNCH_HOLE) when it is used on a block device,
without O_DIRECT can return -EBUSY if it races with another write to the same page.
Since this is rare and discard is not a critical operation, ignore this error
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201111153913.41840-2-mlevitsk@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently at startup if using cache=none on a filesystem lacking
O_DIRECT such as tmpfs, at startup QEMU prints
qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: file system may not support O_DIRECT
qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Could not open '/tmp/foo.img': Invalid argument
while at QMP level the hint is missing, so QEMU reports just
"error": {
"class": "GenericError",
"desc": "Could not open '/tmp/foo.img': Invalid argument"
}
which is close to useless for the end user trying to figure out what
they did wrong.
With this change at startup QEMU prints
qemu-system-x86_64: -drive file=/tmp/foo.img,cache=none: Unable to open '/tmp/foo.img': filesystem does not support O_DIRECT
while at the QMP level QEMU reports a massively more informative
"error": {
"class": "GenericError",
"desc": "Unable to open '/tmp/foo.img': filesystem does not support O_DIRECT"
}
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We want to introduce a new version of qemu_open() that uses an Error
object for reporting problems and make this it the preferred interface.
Rename the existing method to release the namespace for the new impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The `detect-zeroes=unmap` option may issue unaligned
`FALLOC_FL_PUNCH_HOLE` requests, raw block devices can (and will) return
`EINVAL`, qemu should then write the zeroes to the blockdev instead of
issuing an `IO_ERROR`.
The problem can be reprodced like this:
$ qemu-io -c 'write -P 0 42 1234' --image-opts driver=host_device,filename=/dev/loop0,detect-zeroes=unmap
write failed: Invalid argument
Signed-off-by: Antoine Damhet <antoine.damhet@blade-group.com>
Message-Id: <20200717135603.51180-1-antoine.damhet@blade-group.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200717105426.51134-4-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For Linux block devices, being able to open the device read-write
doesn't necessarily mean that the device is actually writable (one
example is a read-only LV, as you get with lvchange -pr <device>). We
have check_hdev_writable() to check this condition and fail opening the
image read-write if it's not actually writable.
However, this check doesn't take auto-read-only into account, but
results in a hard failure instead of downgrading to read-only where
possible.
Fix this and do the writable check not based on BDRV_O_RDWR, but only
when this actually results in opening the file read-write. A second
check is inserted in raw_reconfigure_getfd() to have the same check when
dynamic auto-read-only upgrades an image file from read-only to
read-write.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200717105426.51134-3-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We'll need to call it in raw_open_common(), so move the function to
avoid a forward declaration.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200717105426.51134-2-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit a6b257a08e ('file-posix: Handle undetectable alignment'),
we assume that if we open a file with O_DIRECT and alignment probing
returns 1, we just couldn't find out the real alignment requirement
because some filesystems make the requirement only for allocated blocks.
In this case, a safe default of 4k is used.
This is too strict for NFS, which does actually allow byte-aligned
requests even with O_DIRECT. Because we can't distinguish both cases
with generic code, let's just look at the file system magic and disable
s->needs_alignment for NFS. This way, O_DIRECT can still be used on NFS
for images that are not aligned to 4k.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200716142601.111237-3-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Especially when O_DIRECT is used with image files so that the page cache
indirection can't cause a merge of allocating requests, the file will
fragment on the file system layer, with a potentially very small
fragment size (this depends on the requests the guest sent).
On Linux, fragmentation can be reduced by setting an extent size hint
when creating the file (at least on XFS, it can't be set any more after
the first extent has been allocated), basically giving raw files a
"cluster size" for allocation.
This adds a create option to set the extent size hint, and changes the
default from not setting a hint to setting it to 1 MB. The main reason
why qcow2 defaults to smaller cluster sizes is that COW becomes more
expensive, which is not an issue with raw files, so we can choose a
larger size. The tradeoff here is only potentially wasted disk space.
For qcow2 (or other image formats) over file-posix, the advantage should
even be greater because they grow sequentially without leaving holes, so
there won't be wasted space. Setting even larger extent size hints for
such images may make sense. This can be done with the new option, but
let's keep the default conservative for now.
The effect is very visible with a test that intentionally creates a
badly fragmented file with qemu-img bench (the time difference while
creating the file is already remarkable) and then looks at the number of
extents and the time a simple "qemu-img map" takes.
Without an extent size hint:
$ ./qemu-img create -f raw -o extent_size_hint=0 ~/tmp/test.raw 10G
Formatting '/home/kwolf/tmp/test.raw', fmt=raw size=10737418240 extent_size_hint=0
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 0
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 0, step size 8192)
Run completed in 25.848 seconds.
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 4096
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 4096, step size 8192)
Run completed in 19.616 seconds.
$ filefrag ~/tmp/test.raw
/home/kwolf/tmp/test.raw: 2000000 extents found
$ time ./qemu-img map ~/tmp/test.raw
Offset Length Mapped to File
0 0x1e8480000 0 /home/kwolf/tmp/test.raw
real 0m1,279s
user 0m0,043s
sys 0m1,226s
With the new default extent size hint of 1 MB:
$ ./qemu-img create -f raw -o extent_size_hint=1M ~/tmp/test.raw 10G
Formatting '/home/kwolf/tmp/test.raw', fmt=raw size=10737418240 extent_size_hint=1048576
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 0
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 0, step size 8192)
Run completed in 11.833 seconds.
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 4096
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 4096, step size 8192)
Run completed in 10.155 seconds.
$ filefrag ~/tmp/test.raw
/home/kwolf/tmp/test.raw: 178 extents found
$ time ./qemu-img map ~/tmp/test.raw
Offset Length Mapped to File
0 0x1e8480000 0 /home/kwolf/tmp/test.raw
real 0m0,061s
user 0m0,040s
sys 0m0,014s
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200707142329.48303-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. The previous commit did that with a Coccinelle script I
consider fairly trustworthy. This commit uses the same script with
the matching of return taken out, i.e. we convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
}
to
if (!foo(..., errp)) {
...
...
}
This is unsound: @err could still be read between afterwards. I don't
know how to express "no read of @err without an intervening write" in
Coccinelle. Instead, I manually double-checked for uses of @err.
Suboptimal line breaks tweaked manually. qdev_realize() simplified
further to placate scripts/checkpatch.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-36-armbru@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
raw_co_block_status() in block/file-posix.c never returns 0, so
unallocated_blocks_are_zero is useless (it doesn't affect the only user
of the field: bdrv_co_block_status()). Drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528094405.145708-8-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that there are no clients of bdrv_has_zero_init_truncate, none of
the drivers need to worry about providing it.
What's more, this eliminates a source of some confusion: a literal
reading of the documentation as written in ceaca56f and implemented in
commit 1dcaf527 claims that a driver which returns 0 for
bdrv_has_zero_init_truncate() must not return 1 for
bdrv_has_zero_init(); this condition was violated for parallels, qcow,
and sometimes for vdi, although in practice it did not matter since
those drivers also lacked .bdrv_co_truncate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200428202905.770727-10-eblake@redhat.com>
Acked-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Compress two lines into a single line if immediate return statement is found.
It also remove variables progress, val, data, ret and sock
as they are no longer needed.
Remove space between function "mixer_load" and '(' to fix the
checkpatch.pl error:-
ERROR: space prohibited between function name and open parenthesis '('
Done using following coccinelle script:
@@
local idexpression ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Simran Singhal <singhalsimran0@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200401165314.GA3213@simran-Inspiron-5558>
[lv: in handle_aiocb_write_zeroes_unmap() move "int ret" inside the #ifdef]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
For regular files, we always get BDRV_REQ_ZERO_WRITE behaviour from the
OS, so we can advertise the flag and just ignore it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-7-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a new BdrvRequestFlags parameter to the .bdrv_co_truncate()
driver callbacks, and a supported_truncate_flags field in
BlockDriverState that allows drivers to advertise support for request
flags in the context of truncate.
For now, we always pass 0 and no drivers declare support for any flag.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200424125448.63318-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
check_cache_dropped() calls error_setg() in a loop. It fails to break
the loop in one instance. If a subsequent iteration error_setg()s
again, it trips error_setv()'s assertion.
Fix it to break the loop.
Fixes: 31be8a2a97
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200422130719.28225-3-armbru@redhat.com>
Instead of checking the .bdrv_co_create_opts to see if we need the
fallback, just implement the .bdrv_co_create_opts in the drivers that
need it.
This way we don't break various places that need to know if the
underlying protocol/format really supports image creation, and this way
we still allow some drivers to not support image creation.
Fixes: fd17146cd9
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1816007
Note that technically this driver reverts the image creation fallback
for the vxhs driver since I don't have a means to test it, and IMHO it
is better to leave it not supported as it was prior to generic image
creation patches.
Also drop iscsi_create_opts which was left accidentally.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200326011218.29230-3-mlevitsk@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
[mreitz: Fixed alignment, and moved bdrv_co_create_opts_simple() and
bdrv_create_opts_simple from block.h into block_int.h]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will allow the reuse of a single generic .bdrv_co_create
implementation for several drivers.
No functional changes.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200326011218.29230-2-mlevitsk@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Adding to Block Drivers the capability of being able to clean up
its created files can be useful in certain situations. For the
LUKS driver, for instance, a failure in one of its authentication
steps can leave files in the host that weren't there before.
This patch adds the 'bdrv_co_delete_file' interface to block
drivers and add it to the 'file' driver in file-posix.c. The
implementation is given by 'raw_co_delete_file'.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200130213907.2830642-2-danielhb413@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Clang static code analyzer show warning:
block/file-posix.c:891:9: warning: Value stored to 'op' is never read
op = RAW_PL_ABORT;
^ ~~~~~~~~~~~~
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200302130715.29440-5-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The generic fallback implementation effectively does the same.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200122164532.178040-4-mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Marking without waiting would not result in actual serialising behavior.
Thus, make a call bdrv_mark_request_serialising sufficient for
serialisation to happen.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1578495356-46219-3-git-send-email-pbonzini@redhat.com
Message-Id: <1578495356-46219-3-git-send-email-pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
raw_aio_attach_aio_context() passes uninitialized Error *local_err by
reference to laio_init() via aio_setup_linux_aio(). When laio_init()
fails, it passes it on to error_setg_errno(), tripping error_setv()'s
assertion unless @local_err is null by dumb luck.
Fix by initializing @local_err properly.
Fixes: ed6e216171
Cc: Nishanth Aravamudan <naravamudan@digitalocean.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191130194240.10517-4-armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
The XFS kernel driver has a bug that may cause data corruption for qcow2
images as of qemu commit c8bb23cbdb. We can work around it by
treating post-EOF fallocates as serializing up until infinity (INT64_MAX
in practice).
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191101152510.11719-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
- iotest patches
- Improve performance of the mirror block job in write-blocking mode
- Limit memory usage for the backup block job
- Add discard and write-zeroes support to the NVMe host block driver
- Fix a bug in the mirror job
- Prevent the qcow2 driver from creating technically non-compliant qcow2
v3 images (where there is not enough extra data for snapshot table
entries)
- Allow callers of bdrv_truncate() (etc.) to determine whether the file
must be resized to the exact given size or whether it is OK for block
devices not to shrink
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl2224ESHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AeXMH/RXKEX4BZYMRKCe41P18tJC9Bl2x0T20
YeOsZVvpARlr7o/36BF2kGFF4MnL0OQ+9ELuyROX865rk/VL2rWqnHDE5oQM889a
dFwMs+0zvNbig3iLNcw0H5OkE2mrdM+a1EUdn/lBe/39Z8dPqPxRGqIYHq38Ugdu
emwSy1nWen7o0f71HRJfyVtI3KcrzXx71FrA/FY2yL/eHz+zRYGZj2SpAdFPkXP/
lgaz+m0tWhnSW1QzEOXB0Gh69ULt/DczCinYmv5qUY1noW5TPPtiDNCQTts5O4ba
oJsR3AJv5/l9m65JTmiyQSqnQfPcstrQ5FqOcSnP637cfqUFyWsvdks=
=L7v1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-10-28' into staging
Block patches for softfreeze:
- iotest patches
- Improve performance of the mirror block job in write-blocking mode
- Limit memory usage for the backup block job
- Add discard and write-zeroes support to the NVMe host block driver
- Fix a bug in the mirror job
- Prevent the qcow2 driver from creating technically non-compliant qcow2
v3 images (where there is not enough extra data for snapshot table
entries)
- Allow callers of bdrv_truncate() (etc.) to determine whether the file
must be resized to the exact given size or whether it is OK for block
devices not to shrink
# gpg: Signature made Mon 28 Oct 2019 12:13:53 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2019-10-28: (69 commits)
qemu-iotests: restrict 264 to qcow2 only
Revert "qemu-img: Check post-truncation size"
block: Pass truncate exact=true where reasonable
block: Let format drivers pass @exact
block: Evaluate @exact in protocol drivers
block: Add @exact parameter to bdrv_co_truncate()
block: Do not truncate file node when formatting
block/cor: Drop cor_co_truncate()
block: Handle filter truncation like native impl.
iotests: Test qcow2's snapshot table handling
iotests: Add peek_file* functions
qcow2: Fix v3 snapshot table entry compliancy
qcow2: Repair snapshot table with too many entries
qcow2: Fix overly long snapshot tables
qcow2: Keep track of the snapshot table length
qcow2: Fix broken snapshot table entries
qcow2: Add qcow2_check_fix_snapshot_table()
qcow2: Separate qcow2_check_read_snapshot_table()
qcow2: Write v3-compliant snapshot list on upgrade
qcow2: Put qcow2_upgrade() into its own function
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have two protocol drivers that return success when trying to shrink a
block device even though they cannot shrink it. This behavior is now
only allowed with exact=false, so they should return an error with
exact=true.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190918095144.955-6-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We have two drivers (iscsi and file-posix) that (in some cases) return
success from their .bdrv_co_truncate() implementation if the block
device is larger than the requested offset, but cannot be shrunk. Some
callers do not want that behavior, so this patch adds a new parameter
that they can use to turn off that behavior.
This patch just adds the parameter and lets the block/io.c and
block/block-backend.c functions pass it around. All other callers
always pass false and none of the implementations evaluate it, so that
this patch does not change existing behavior. Future patches take care
of that.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190918095144.955-5-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There are three page size in qemu:
real host page size
host page size
target page size
All of them have dedicate variable to represent. For the last two, we
use the same form in the whole qemu project, while for the first one we
use two forms: qemu_real_host_page_size and getpagesize().
qemu_real_host_page_size is defined to be a replacement of
getpagesize(), so let it serve the role.
[Note] Not fully tested for some arch or device.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191013021145.16011-3-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A block driver can provide a callback to report driver-specific
statistics.
file-posix driver now reports discard statistics
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190923121737.83281-10-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will help to identify how many of the user-issued discard operations
(accounted on a device level) have actually suceeded down on the host file
(even though the numbers will not be exactly the same if non-raw format
driver is used (e.g. qcow2 sending metadata discards)).
Note that these numbers will not include discards triggered by
write-zeroes + MAY_UNMAP calls.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190923121737.83281-9-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Paolo Bonzini
Daniel P. Berrangé
Thomas Huth
Vladimir Sementsov-Ogievskiy
David Edmondson
Pan Nengyuan
Li Feng
Maxim Levitsky
Antoine Damhet
Kevin Wolf
Markus Armbruster
Eric Blake
Simran Singhal
Daniel Henrique Barboza
Chen Qun
Max Reitz
Aarushi Mehta
Peter Maydell
Wei Yang
Anton Nefedov