Setting the model is only available in pre-v1 GIC models.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Message-id: 1408372255-12358-3-git-send-email-adam@os.inf.tu-dresden.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GICD_ICFGR register covers 4 interrupts per byte.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Message-id: 1408372255-12358-2-git-send-email-adam@os.inf.tu-dresden.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
since hotunplug the ehci host adapter, we should
delete vm_change_state_handler also, so the
VMChangeStateEntry should be saved in EHCIState.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
add global variables releasing logic when the usb buses
were removed or hot-unpluged.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit d063c3112c4cd23a479ee18720c2bd119da2d315.
"2 << x" is the same as "2 ^ (x + 1)", so the old code is correct.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There appears to be typo in OHCI with isochronous transfers
resulting in isoch. transfer descriptor state never being written back.
The'put_words' function is in a OR statement hence it is never called.
Signed-off-by: Jack Un <jack.un@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
after commit 003e15a180373048f0c1f4df0bfe303746eb2676
the DPRINTF will broke compiling, adjust its location.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We identify devices by their Open Firmware device paths. The encoding
of the host controller and hub port numbers is incorrect:
usb_get_fw_dev_path() formats them in decimal, while SeaBIOS uses
hexadecimal. When some port number > 9, SeaBIOS will miss the
bootindex (lucky case), or apply it to another device (unlucky case).
The relevant spec[*] agrees with SeaBIOS (and OVMF, for that matter).
Change %d to %x.
Bug can bite only with host controllers or hubs sporting more than ten
ports. I'm not aware of any.
[*] Open Firmware Recommended Practice: Universal Serial Bus,
Version 1, Section 3.2.1 Device Node Address Representation
http://www.openfirmware.org/1275/bindings/usb/usb-1_0.ps
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Note: xhci can be configured with up to 15 ports (default is 4 ports).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
reporting from Fam and a fix for DPRINTF bitrot. Memory patches try
again to initialize name from the QOM name.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=iLTP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
SCSI patches include bug fixes from Fam and Peter, improved error
reporting from Fam and a fix for DPRINTF bitrot. Memory patches try
again to initialize name from the QOM name.
# gpg: Signature made Thu 28 Aug 2014 15:10:31 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream:
memory: Lazy init name from QOM name as needed
xen: hvm: Abstract away memory region name ref
xen-hvm: Constify string
virtio-scsi: Report error if num_queues is 0 or too large
scsi-generic: remove superfluous DPRINTF avoid to break compiling
block/iscsi: fix memory corruption on iscsi resize
scsi-bus: Convert DeviceClass init to realize
block: Pass errp in blkconf_geometry
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
of the NMI monitor command.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=tbi2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kvm/tags/for-upstream' into staging
Mostly bugfixes + Alexey's interface-based implementation
of the NMI monitor command.
# gpg: Signature made Thu 28 Aug 2014 15:07:22 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/kvm/tags/for-upstream:
mc146818rtc: reinitialize irq_reinject_on_ack_count on reset
target-i386: Add "tsc_adjust" CPU feature name
target-i386: Add "mpx" CPU feature name
vl: process -object after other backend options
checkpatch.pl: adjust typedef definition to QEMU coding style
x86: Clear MTRRs on vCPU reset
x86: kvm: Add MTRR support for kvm_get|put_msrs()
x86: Use common variable range MTRR counts
target-i386: Don't forbid NX bit on PAE PDEs and PTEs
spapr: Add support for new NMI interface
s390x: Migrate to new NMI interface
s390x: Convert QEMUMachine to MachineClass
cpus: Define callback for QEMU "nmi" command
kvm: run cpu state synchronization on target vcpu thread
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
No cmd vq surprises guest (Linux panics in virtscsi_probe), too many
queues abort qemu (in the following virtio_add_queue).
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
variables lun and tag had been eliminated, break compiling
when enable debug switch. Meanwhile traces provide the same
information with this DPRINTF, so remove it.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace "init/destroy" with "realize/unrealize" in SCSIDeviceClass,
which has errp as a parameter. So all the implementations now use
error_setg instead of error_report for reporting error.
Also in scsi_bus_legacy_handle_cmdline, report the error when
initializing the if=scsi devices, before returning it, because in the
callee, error_report is changed to error_setg. And the callers don't
have the right locations (e.g. "-drive if=scsi").
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows us to pass error information to caller.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we make use of OVMF for the BIOS then we can use GPUs without VGA
space access, but we still need this quirk. Disassociate it from the
x-vga option and enable it on all NVIDIA VGA display class devices.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
A bunch of bugfixes - these will make sense for 2.1.1
ACPI support for TPM and partial ARI support for PCIE.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJT+mRDAAoJECgfDbjSjVRpNisIAIU4TriYRVG6gQBGIatvdJdg
+2ZAiJEAiUQlCIfBvyofwmpiVjkrnFlinmbBeuoSOxTFtuHjFxW+N8uAD93/OiNj
wHsruVz5ReHov3l3SWQBYkJAEFCYw0yKXPqMkqFj9Y5Dq2uWv+IcceJsBwCn+LQI
WtEoYtJMhcmAove27tioT7yhEL7x7pF3StMDX9gjRpml4KxA2himgPcrkyq6wjDk
Qg3zNEQNpehLkHJLFHEGzwrYUgY2xSfAl7dUCQ+pVXttaEion49/KclBz0aWkt0U
QUQCELCfeRf9Od3Gh4IDUIjTJyBhBtNnJo5+YcK6yYu/JsaVJ1hTSnDtqCq7udo=
=FjrT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc fixes, features
A bunch of bugfixes - these will make sense for 2.1.1
ACPI support for TPM and partial ARI support for PCIE.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 24 Aug 2014 23:16:35 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
pcie: fix trailing whitespace
ioh3420: Enable ARI forwarding
ioh3420: Remove obsoleted, unused ioh3420_init function
pcie: Rename the pcie_cap_ari_* functions to pcie_cap_arifwd_*
pcie: Fix incorrect write to the ari capability next function field
ssdt-tpm: add generated hex file to git
Add ACPI tables for TPM
pc: reserve more memory for ACPI for new machine types
pcihp: fix possible array out of bounds
pci_bridge: manually destroy memory regions within PCIBridgeWindows
hostmem: set MPOL_MF_MOVE
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This implements an NMI interface POWERPC SPAPR machine.
This enables an "nmi" HMP/QMP command supported on SPAPR.
This calls POWERPC_EXCP_RESET (vector 0x100) in the guest to deliver NMI
to every CPU. The expected result is XMON (in-kernel debugger) invocation.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This implements an NMI interface for s390 and s390-ccw machines.
This removes #ifdef s390 branch in qmp_inject_nmi so new s390's
nmi_monitor_handler() callback is going to be used for NMI.
Since nmi_monitor_handler()-calling code is platform independent,
CPUState::cpu_index is used instead of S390CPU::env.cpu_num.
There should not be any change in behaviour as both @cpu_index and
@cpu_num are global CPU numbers.
Note that s390_cpu_restart() already takes care of the specified cpu,
so we don't need to schedule via async_run_on_cpu().
Since the only error s390_cpu_restart() can return is ENOSYS, convert
it to QERR_UNSUPPORTED.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This converts s390-virtio and s390-ccw-virtio machines to QOM MachineClass.
This brings ability to add interfaces to the machine classes. The first
interface for addition will be NMI.
The patch is mechanical so no change in behavior is expected.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This introduces an NMI (Non Maskable Interrupt) interface with
a single nmi_monitor_handler() method. A machine or a device can
implement it. This searches for an QOM object with this interface
and if it is implemented, calls it. The callback implements an action
required to cause debug crash dump on in-kernel debugger invocation.
The callback returns Error**.
This adds a nmi_monitor_handle() helper which walks through
all objects to find the interface. The interface method is called
for all found instances.
This adds support for it in qmp_inject_nmi(). Since no architecture
supports it at the moment, there is no change in behaviour.
This changes inject-nmi command description for HMP and QMP.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename helper functions to make a clearer distinction between
the PCIe capability/control register feature ARI forwarding and a
device that supports the ARI feature via an ARI extended PCIe capability.
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI_ARI_CAP_NFN, a macro for reading next function was used instead of
the intended write.
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
commit 868270f23d8db2cce83e4f082fe75e8625a5fbf9
acpi-build: tweak acpi migration limits
broke kernel loading with -kernel/-initrd: it doubled
the size of ACPI tables but did not reserve
enough memory.
As a result, issues on boot and halt are observed.
Fix this up by doubling reserved memory for new machine types.
Cc: qemu-stable@nongnu.org
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Prevent out-of-bounds array access on
acpi_pcihp_pci_status.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
The regions are destroyed and recreated on configuration space accesses.
We need to destroy them before the containing PCIBridgeWindows object
is freed.
Reported-by: Gonglei <arei.gonglei@huawei.com>
Reported-by: Knut Omang <knut.omang@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When running VMware ESXi under qemu-kvm the guest discards frames
that are too short. Short ARP Requests will be dropped, this prevents
guests on the same bridge as VMware ESXi from communicating. This patch
simply adds the padding on the network device itself.
Signed-off-by: Ben Draper <ben@xrsa.net>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This have 6 inline usages. Make it a bit more readable by using a local
variable.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It's a constant based on a macro. Just use the macro in place.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=tfGn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 22 Aug 2014 14:47:53 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (29 commits)
qemu-img: Allow cache mode specification for amend
qemu-img: Allow source cache mode specification
vmdk: Use bdrv_nb_sectors() where sectors, not bytes are wanted
blkdebug: Delete BH in bdrv_aio_cancel
qemu-iotests: add test case 101 for short file I/O
raw-posix: fix O_DIRECT short reads
block/iscsi: fix memory corruption on iscsi resize
block/vvfat.c: remove debugging code to reinit stderr if NULL
iotests: Add test for image filename construction
quorum: Implement bdrv_refresh_filename()
nbd: Implement bdrv_refresh_filename()
blkverify: Implement bdrv_refresh_filename()
blkdebug: Implement bdrv_refresh_filename()
block: Add bdrv_refresh_filename()
virtio-blk: fix reference a pointer which might be freed
virtio-blk: allow block_resize with dataplane
block: acquire AioContext in qmp_block_resize()
qemu-iotests: Fix 028 reference output for qed
test-coroutine: test cost introduced by coroutine
iotests: Add test for qcow2's cache options
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In function virtio_blk_handle_request, it may freed memory pointed by req,
So do not access member of req after calling this function.
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that block_resize acquires the AioContext we can safely allow
resizing the disk.
Reported-by: Andrey Korolyov <andrey@xdel.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
They clutter the code. Unfortunately, I can't figure out how to make
Coccinelle drop all of them, so I have to settle for common special
cases:
@@
type T;
T *pt;
void *pv;
@@
- pt = (T *)pv;
+ pt = pv;
@@
type T;
@@
- (T *)
(\(g_malloc\|g_malloc0\|g_realloc\|g_new\|g_new0\|g_renew\|
g_try_malloc\|g_try_malloc0\|g_try_realloc\|
g_try_new\|g_try_new0\|g_try_renew\)(...))
Topped off with minor manual style cleanups.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_new(T, n) is safer than g_malloc(sizeof(*v) * n) for two reasons.
One, it catches multiplication overflowing size_t. Two, it returns
T * rather than void *, which lets the compiler catch more type
errors.
Perhaps a conversion to g_malloc_n() would be neater in places, but
that's merely four years old, and we can't use such newfangled stuff.
This commit only touches allocations with size arguments of the form
sizeof(T), plus two that use 4 instead of sizeof(uint32_t). We can
make the others safe by converting to g_malloc_n() when it becomes
available to us in a couple of years.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
Patch created with Coccinelle, with two manual changes on top:
* Add const to bdrv_iterate_format() to keep the types straight
* Convert the allocation in bdrv_drop_intermediate(), which Coccinelle
inexplicably misses
Coccinelle semantic patch:
@@
type T;
@@
-g_malloc(sizeof(T))
+g_new(T, 1)
@@
type T;
@@
-g_try_malloc(sizeof(T))
+g_try_new(T, 1)
@@
type T;
@@
-g_malloc0(sizeof(T))
+g_new0(T, 1)
@@
type T;
@@
-g_try_malloc0(sizeof(T))
+g_try_new0(T, 1)
@@
type T;
expression n;
@@
-g_malloc(sizeof(T) * (n))
+g_new(T, n)
@@
type T;
expression n;
@@
-g_try_malloc(sizeof(T) * (n))
+g_try_new(T, n)
@@
type T;
expression n;
@@
-g_malloc0(sizeof(T) * (n))
+g_new0(T, n)
@@
type T;
expression n;
@@
-g_try_malloc0(sizeof(T) * (n))
+g_try_new0(T, n)
@@
type T;
expression p, n;
@@
-g_realloc(p, sizeof(T) * (n))
+g_renew(T, p, n)
@@
type T;
expression p, n;
@@
-g_try_realloc(p, sizeof(T) * (n))
+g_try_renew(T, p, n)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
