This variable is about the host OS, not the target. It is used a lot
more since the Meson conversion, but the original sin dates back to 2003.
Time to fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_DARWIN, CONFIG_LINUX and CONFIG_BSD are used in some rules, but
only CONFIG_LINUX has substantial use. Convert them all to if...endif.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Patch removes DPRINTF macro and adds multiple tracepoints
to capture different kvm events.
We also drop the DPRINTFs that don't add any additional
information than trace_kvm_run_exit already does.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1827
Signed-off-by: Jai Arora <arorajai2798@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This variable is not used or declared outside kvm-all.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without this, we just dirty a single byte, and so if the caller writes
more than one byte to the host memory then we won't have invalidated any
translation blocks that start after the first byte and overlap those
writes. In particular, AArch64's DC ZVA implementation uses probe_access
(via probe_write), and so we don't invalidate the entire block, only the
TB overlapping the first byte (and, in the unusual case an unaligned VA
is given to the instruction, we also probe that specific address in
order to get the right VA reported on an exception, so will invalidate a
TB overlapping that address too). Since our IC IVAU implementation is a
no-op for system emulation that relies on the softmmu already having
detected self-modifying code via this mechanism, this means we have
observably wrong behaviour when jumping to code that has been DC ZVA'ed.
In practice this is an unusual thing for software to do, as in reality
the OS will DC ZVA the page and the application will go and write actual
instructions to it that aren't UDF #0, but you can write a test that
clearly shows the faulty behaviour.
For functions other than probe_access it's not clear what size to use
when 0 is passed in. Arguably a size of 0 shouldn't dirty at all, since
if you want to actually write then you should pass in a real size, but I
have conservatively kept the implementation as dirtying the first byte
in that case so as to avoid breaking any assumptions about that
behaviour.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Message-Id: <20231104031232.3246614-1-jrtc27@jrtc27.com>
[rth: Move the dirtysize computation next to notdirty_write.]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In cpu_exec_step_atomic, we did not set CF_LAST_IO, which lead
to a loop with cpu_io_recompile.
But since 18a536f1f8 ("Always require can_do_io") we no longer
need a flag to indicate when the last insn should have can_do_io set,
so remove the flag entirely.
Reported-by: Clément Chigot <chigot@adacore.com>
Tested-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1961
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Factor the TCG specific code from cpu_common_reset_hold() to
tcg_cpu_reset_hold() within tcg-accel-ops.c. Since this file
is sysemu specific, we can inline tcg_flush_softmmu_tlb(),
removing its declaration in "exec/cpu-common.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230918104153.24433-4-philmd@linaro.org>
Introduce cpu_exec_reset_hold() which call an accelerator
specific AccelOpsClass::cpu_reset_hold() handler.
Define a stub on TCG user emulation, because CPU reset is
irrelevant there.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230918104153.24433-3-philmd@linaro.org>
"exec/cpu-common.h" is meant to contain the declarations
related to CPU usable with any accelerator / target
combination.
tcg_flush_jmp_cache() is specific to TCG, so restrict its
declaration by moving it to "exec/tb-flush.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230918104153.24433-2-philmd@linaro.org>
Store bytes under a mask is fundamentally a cmpxchg, not a straight store.
Use HAVE_CMPXCHG128 instead of HAVE_ATOMIC128_RW.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230916220151.526140-8-richard.henderson@linaro.org>
We handled the HAVE_ATOMIC128_RW case with atomic16_set at the top of
the function; the only thing left for a host without that support is
to fall through to cpu_loop_exit_atomic.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230916220151.526140-7-richard.henderson@linaro.org>
Move all of it into accel/tcg/monitor.c. This puts everything
about tcg that is only used by the monitor in the same place.
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
copy_call() has an unused parameter so remove it.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231019101030.128431-7-akihiko.odaki@daynix.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231029145033.592566-19-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Since we now assume that ioeventfds are present, kvm_io_listener is always
registered. Merge it with kvm_coalesced_pio_listener in a single
listener. Since PIO space does not have KVM memslots attached to it,
the priority is irrelevant.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
NR_IOBUS_DEVS was increased to 200 in Linux 2.6.34. By Linux 3.5 it had
increased to 1000 and later ioeventfds were changed to not count against
the limit. But the earlier limit of 200 would already be enough for
kvm_check_many_ioeventfds() to be true, so remove the check.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a remnant of pre-VFIO device assignment; it is not defined
anymore by Linux and not used by QEMU.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_IRQFD was introduced in Linux 2.6.32, and since then it has always been
available on architectures that support an in-kernel interrupt controller.
We can require it unconditionally.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was introduced in KVM in Linux 3.5, we can require it unconditionally
in kvm_irqchip_send_msi(). However, not all architectures have to implement
it so check it only in x86, the only architecture that ever had MSI injection
but not KVM_CAP_SIGNAL_MSI.
ARM uses it to detect the presence of the ITS emulation in the kernel,
introduced in Linux 4.8. Assume that it's there and possibly fail when
realizing the arm-its-kvm device.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This was introduced in KVM in Linux 2.6.33, we can require it unconditionally.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This function is only invoked from hw/intc/s390_flic_kvm.c, and therefore
only if CONFIG_KVM is defined.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We'll need the stub soon from memory device context.
While at it, use "unsigned int" as return value and place the
declaration next to kvm_get_free_memslots().
Message-ID: <20230926185738.277351-11-david@redhat.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's return the number of free slots instead of only checking if there
is a free slot. While at it, check all address spaces, which will also
consider SMM under x86 correctly.
This is a preparation for memory devices that consume multiple memslots.
Message-ID: <20230926185738.277351-5-david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Translation logic may partially decode an instruction, then abort and
remove the instruction from the TB. This can happen for example when an
instruction spans two pages. In this case, plugins may get an incorrect
result when calling qemu_plugin_tb_n_insns to query for the number of
instructions in the TB. This patch updates plugin_gen_tb_end to set the
final instruction count.
Signed-off-by: Matt Borgerson <contact@mborgerson.com>
[AJB: added g_assert to defed API]
Message-Id: <CADc=-s5RwGViNTR-h5cq3np673W3RRFfhr4vCGJp0EoDUxvhog@mail.gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-23-alex.bennee@linaro.org>
The softmmu/ directory contains files specific to system
emulation. Rename it as system/. Update meson rules, the
MAINTAINERS file and all the documentation and comments.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-14-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename accel.softmmu -> accel.system in file paths
and the register_types() method.
Rename sysemu_stubs_ss -> system_stubs_ss in meson
following the pattern used on other source set names.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-7-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231004090629.37473-6-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The tcg/tcg.h header is a big bucket, containing stuff related to
the translators and the JIT backend. The places that initialize
tcg or create new threads do not need all of that, so split out
these three functions to a new header.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can load tcg_ctx just as easily within the callee.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
cpu_in_serial_context() is not target specific,
move it declaration to "internal-common.h" (which
we include in the 4 source files modified).
Remove the unused "exec/exec-all.h" header from
cpu-exec-common.c. There is no more target specific
code in this file: make it target agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-12-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove the unused "exec/exec-all.h" header. There is
no more target specific code in it: make it target
agnostic (rename using the '-common' suffix). Since
it is TCG specific, move it to accel/tcg, updating
MAINTAINERS.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-11-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move target-agnostic declarations from "internal-target.h"
to a new "internal-common.h" header.
monitor.c now don't include target specific headers and can
be compiled once in system_ss[].
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg/internal.h contains target specific declarations.
Unit files including it become "target tainted": they can not
be compiled as target agnostic. Rename using the '-target'
suffix to make this explicit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We use the '-common.c' suffix for target agnostic units.
This file is target specific, rename it using the '-target'
suffix.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-6-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel-blocker.c is not target specific, move it to system_ss[].
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-5-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In commit 00c9a5c2c3 ("accel/tcg: Restrict 'qapi-commands-machine.h'
to system emulation") we moved the definition to accel/tcg/ which is
where this function is called. No need to expose it outside.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-4-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A large chunk of ld/st functions are moved from cputlb.c and user-exec.c
to ldst_common.c.inc as their implementation is the same between both
modes.
Eventually, ldst_common.c.inc could be compiled into a separate
target-specific compilation unit, and be linked in with the targets.
Keeping CPUArchState usage out of cputlb.c (CPUArchState is primarily
used to access the mmu index in these functions).
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-12-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The prototype of do_[st|ld]*_mmu() is unified between system- and
user-mode allowing a large chunk of helper_[st|ld]*() and cpu_[st|ld]*()
functions to be expressed in same manner between both modes. These
functions will be moved to ldst_common.c.inc in a following commit.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-11-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Makes ldst_atomicity.c.inc almost target-independent, with the exception
of TARGET_PAGE_MASK, which will be addressed in a future patch.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-8-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The goal is to (in the future) allow for per-target compilation of
functions in atomic_template.h whilst atomic_mmu_lookup() and cputlb.c
are compiled once-per user- or system mode.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-7-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
do_[ld|st]*() and mmu_lookup*() are changed to use CPUState over
CPUArchState, moving the target-dependence to the target-facing facing
cpu_[ld|st] functions.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-6-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb; cpu_env instead of env_ptr.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
probe_access_internal() is changed to instead take the generic CPUState
over CPUArchState, in order to lessen the target-specific coupling of
cputlb.c. Note: probe_access*() also don't need the full CPUArchState,
but aren't touched in this patch as they are target-facing.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-5-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Changes tlb_*() functions to take CPUState instead of CPUArchState, as
they don't require the full CPUArchState. This makes it easier to
decouple target-(in)dependent code.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-4-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that there is no padding between CPUNegativeOffsetState
and CPUArchState, this value is constant across all targets.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow the name 'cpu_env' to be used for something else.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
