Commit Graph

30 Commits

Author SHA1 Message Date
Max Reitz 1dcaf52760 block: Implement .bdrv_has_zero_init_truncate()
We need to implement .bdrv_has_zero_init_truncate() for every block
driver that supports truncation and has a .bdrv_has_zero_init()
implementation.

Implement it the same way each driver implements .bdrv_has_zero_init().
This is at least not any more unsafe than what we had before.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190724171239.8764-5-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-08-19 17:13:26 +02:00
Markus Armbruster 0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Kevin Wolf 80f5c33ff3 block: Advertise BDRV_REQ_NO_FALLBACK in filter drivers
Filter drivers that support .bdrv_co_pwrite_zeroes can safely advertise
BDRV_REQ_NO_FALLBACK because they just forward the request flags to
their child node.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Eric Blake <eblake@redhat.com>
2019-03-26 11:37:51 +01:00
Alberto Garcia 8a2ce0bc1e block: Add a 'mutable_opts' field to BlockDriver
If we reopen a BlockDriverState and there is an option that is present
in bs->options but missing from the new set of options then we have to
return an error unless the driver is able to reset it to its default
value.

This patch adds a new 'mutable_opts' field to BlockDriver. This is
a list of runtime options that can be modified during reopen. If an
option in this list is unspecified on reopen then it must be reset (or
return an error).

Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-03-12 20:30:14 +01:00
Max Reitz 2654267cc1 block: Add strong_runtime_opts to BlockDriver
This new field can be set by block drivers to list the runtime options
they accept that may influence the contents of the respective BDS. As of
a follow-up patch, this list will be used by the common
bdrv_refresh_filename() implementation to decide which options to put
into BDS.full_open_options (and consequently whether a JSON filename has
to be created), thus freeing the drivers of having to implement that
logic themselves.

Additionally, this patch adds the field to all of the block drivers that
need it and sets it accordingly.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-22-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-25 15:11:27 +01:00
Max Reitz f30c66ba6e block: Use bdrv_refresh_filename() to pull
Before this patch, bdrv_refresh_filename() is used in a pushing manner:
Whenever the BDS graph is modified, the parents of the modified edges
are supposed to be updated (recursively upwards).  However, that is
nonviable, considering that we want child changes not to concern
parents.

Also, in the long run we want a pull model anyway: Here, we would have a
bdrv_filename() function which returns a BDS's filename, freshly
constructed.

This patch is an intermediate step.  It adds bdrv_refresh_filename()
calls before every place a BDS.filename value is used.  The only
exceptions are protocol drivers that use their own filename, which
clearly would not profit from refreshing that filename before.

Also, bdrv_get_encrypted_filename() is removed along the way (as a user
of BDS.filename), since it is completely unused.

In turn, all of the calls to bdrv_refresh_filename() before this patch
are removed, because we no longer have to call this function on graph
changes.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-02-25 15:11:25 +01:00
Vladimir Sementsov-Ogievskiy f66b1f0e27 block: drop empty .bdrv_close handlers
.bdrv_close handler is optional after previous commit, no needs to keep
empty functions more.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-08-15 12:50:39 +02:00
Peter Maydell 7851f1a706 Block layer patches:
- Copy offloading fixes for when the copy increases the image size
 - Temporary revert of the removal of deprecated -drive options
 - Fix request serialisation in the image fleecing scenario
 - Fix copy-on-read crash with unaligned image size
 - Fix another drain crash
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbRNLQAAoJEH8JsnLIjy/WOaQQALlZk01JohETuwGG6HGl0LdI
 jEEm+N0J+BlGOVjoGU67OKGidUCl5WvBsQTlyYkmlaToGuk/njWxCa/GA6+iNRnt
 MDq7Ovr8uZI3D+0Fuc6xg/6NBiLkukgh0Q9gMWkzn3jaNWzO2WcTr8WXwepvP6sj
 YtPhEQOXTT3sXf/MFY8ig7qRrZ6f7LFOoKu7LMnrD+QWDo8TY3QLZaxP9OUFHH7S
 A6J0LIfuRZlq79a7SgrRkCR2ddtgYyBQ+zD7PD5kf1vLW4+dOhDOutQEsZCMCPgR
 ft99kNhrZcJGN6n2r8/oVcvRkw5c4I1JPgakm/GoW/NllfPMebuPospKaS4wiJnB
 zI4YOtmco4Mfxkw/wK+Ep/bPCpxEF43uDcpPiEjsNADrdLq0eKnPn5ctwSyWlGvn
 ayQWxDoKoYckn/ccjtLxJ2xPws8433cTXrBdIKnJadWxi3iRNzlIKHRuEfXf9zQt
 G+Nq7ruysT9TPf9ifuCHcZnTsi3SLYLsjCj7pAgBkazBYE2cCI3eKN8kxsDJi7qv
 cWzFCpwE28pHRJ6FwtdzBVkNcfTlC/XopR1M66OzYZlLqR/4hbNhyHL3hBV+yfrM
 fC7mPi81ttI6e+JAgC6K8t3Ey242MjSzUYa7pJUNws7RpqUhfhr6EXXbBceJKsVW
 F8qKZoiIEK7wDacUiEiE
 =FXOo
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Copy offloading fixes for when the copy increases the image size
- Temporary revert of the removal of deprecated -drive options
- Fix request serialisation in the image fleecing scenario
- Fix copy-on-read crash with unaligned image size
- Fix another drain crash

# gpg: Signature made Tue 10 Jul 2018 16:37:52 BST
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (24 commits)
  block: Use common write req handling in truncate
  block: Fix bdrv_co_truncate overlap check
  block: Use common req handling in copy offloading
  block: Use common req handling for discard
  block: Fix handling of image enlarging write
  block: Extract common write req handling
  block: Use uint64_t for BdrvTrackedRequest byte fields
  block: Use BdrvChild to discard
  block: Add copy offloading trace points
  block: Prefix file driver trace points with "file_"
  Revert "block: Remove deprecated -drive geometry options"
  Revert "block: Remove deprecated -drive option addr"
  Revert "block: Remove deprecated -drive option serial"
  Revert "block: Remove dead deprecation warning code"
  block/blklogwrites: Make sure the log sector size is not too small
  qapi/block-core.json: Add missing documentation for blklogwrites log-append option
  block/backup: fix fleecing scheme: use serialized writes
  block: add BDRV_REQ_SERIALISING flag
  block: split flags in copy_range
  block/io: fix copy_range
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-10 17:28:29 +01:00
Fam Zheng 0b9fd3f467 block: Use BdrvChild to discard
Other I/O functions are already using a BdrvChild pointer in the API, so
make discard do the same. It makes it possible to initiate the same
permission checks before doing I/O, and much easier to share the
helper functions for this, which will be added and used by write,
truncate and copy range paths.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-10 16:01:52 +02:00
Vladimir Sementsov-Ogievskiy 67b51fb998 block: split flags in copy_range
Pass read flags and write flags separately. This is needed to handle
coming BDRV_REQ_NO_SERIALISING clearly in following patches.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-07-10 13:04:25 +02:00
Fam Zheng 6d6bcc46b5 raw: Drop superfluous semicolon
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180702025836.20957-5-famz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-07-09 19:43:24 +02:00
Kevin Wolf 061ca8a368 block: Convert .bdrv_truncate callback to coroutine_fn
bdrv_truncate() is an operation that can block (even for a quite long
time, depending on the PreallocMode) in I/O paths that shouldn't block.
Convert it to a coroutine_fn so that we have the infrastructure for
drivers to make their .bdrv_co_truncate implementation asynchronous.

This change could potentially introduce new race conditions because
bdrv_truncate() isn't necessarily executed atomically any more. Whether
this is a problem needs to be evaluated for each block driver that
supports truncate:

* file-posix/win32, gluster, iscsi, nfs, rbd, ssh, sheepdog: The
  protocol drivers are trivially safe because they don't actually yield
  yet, so there is no change in behaviour.

* copy-on-read, crypto, raw-format: Essentially just filter drivers that
  pass the request to a child node, no problem.

* qcow2: The implementation modifies metadata, so it needs to hold
  s->lock to be safe with concurrent I/O requests. In order to avoid
  double locking, this requires pulling the locking out into
  preallocate_co() and using qcow2_write_caches() instead of
  bdrv_flush().

* qed: Does a single header update, this is fine without locking.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-29 14:20:56 +02:00
Fam Zheng 72d219e2f9 raw: Implement copy offloading
Just pass down to ->file.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180601092648.24614-4-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-01 14:41:47 +01:00
Fam Zheng 3844553852 raw: Check byte range uniformly
We don't verify the request range against s->size in the I/O callbacks
except for raw_co_pwritev. This is inconsistent (especially for
raw_co_pwrite_zeroes and raw_co_pdiscard), so fix them, in the meanwhile
make the helper reusable by the coming new callbacks.

Note that in most cases the block layer already verifies the request
byte range against our reported image length, before invoking the driver
callbacks.  The exception is during image creating, after
blk_set_allow_write_beyond_eof(blk, true) is called. But in that case,
the requests are not directly from the user or guest. So there is no
visible behavior change in adding the check code.

The int64_t -> uint64_t inconsistency, as shown by the type casting, is
pre-existing due to the interface.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180601092648.24614-3-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-01 14:41:47 +01:00
Max Reitz 228345bf5d block: Support BDRV_REQ_WRITE_UNCHANGED in filters
Update the rest of the filter drivers to support
BDRV_REQ_WRITE_UNCHANGED.  They already forward write request flags to
their children, so we just have to announce support for it.

This patch does not cover the replication driver because that currently
does not support flags at all, and because it just grabs the WRITE
permission for its children when it can, so we should be fine just
submitting the incoming WRITE_UNCHANGED requests as normal writes.

It also does not cover format drivers for similar reasons.  They all use
bdrv_format_default_perms() as their .bdrv_child_perm() implementation
so they just always grab the WRITE permission for their file children
whenever possible.  In addition, it often would be difficult to
ascertain whether incoming unchanging writes end up as unchanging writes
in their files.  So we just leave them as normal potentially changing
writes.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180421132929.21610-7-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2018-05-15 16:15:21 +02:00
Stefan Hajnoczi efc75e2a4c block: rename .bdrv_create() to .bdrv_co_create_opts()
BlockDriver->bdrv_create() has been called from coroutine context since
commit 5b7e1542cf ("block: make
bdrv_create adopt coroutine").

Make this explicit by renaming to .bdrv_co_create_opts() and add the
coroutine_fn annotation.  This makes it obvious to block driver authors
that they may yield, use CoMutex, or other coroutine_fn APIs.
bdrv_co_create is reserved for the QAPI-based version that Kevin is
working on.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170705102231.20711-2-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-02 18:39:07 +01:00
Eric Blake d41aa7e36f raw: Switch to .bdrv_co_block_status()
We are gradually moving away from sector-based interfaces, towards
byte-based.  Update the raw driver accordingly.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-03-02 18:39:07 +01:00
Manos Pitsidianakis f024aee867 block: remove unused bdrv_media_changed
This function is not used anywhere, so remove it.

Markus Armbruster adds:
The i82078 floppy device model used to call bdrv_media_changed() to
implement its media change bit when backed by a host floppy.  This
went away in 21fcf36 "fdc: simplify media change handling".
Probably broke host floppy media change.  Host floppy pass-through
was dropped in commit f709623.  bdrv_media_changed() has never been
used for anything else.  Remove it.
(Source is Message-ID: <87y3ruaypm.fsf@dusky.pond.sub.org>)

Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-09-04 18:31:13 +02:00
Max Reitz 7ea37c3066 block: Add PreallocMode to bdrv_truncate()
For block drivers that just pass a truncate request to the underlying
protocol, we can now pass the preallocation mode instead of aborting if
it is not PREALLOC_MODE_OFF.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:45:01 +02:00
Max Reitz 8243ccb743 block: Add PreallocMode to BD.bdrv_truncate()
Add a PreallocMode parameter to the bdrv_truncate() function implemented
by each block driver. Currently, we always pass PREALLOC_MODE_OFF and no
driver accepts anything else.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:45:01 +02:00
Stefan Hajnoczi a843a22a82 raw-format: add bdrv_measure() support
Maximum size calculation is trivial for the raw format: it's just the
requested image size (because there is no metadata).

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-3-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-07-11 17:45:00 +02:00
Eric Blake d5254033da block: Simplify use of BDRV_BLOCK_RAW
The lone caller that cares about a return of BDRV_BLOCK_RAW
(namely, io.c:bdrv_co_get_block_status) completely replaces the
return value, so there is no point in passing BDRV_BLOCK_DATA.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-07-10 13:18:05 +02:00
Manos Pitsidianakis f5a5ca7969 block: change variable names in BlockDriverState
Change the 'int count' parameter in *pwrite_zeros, *pdiscard related
functions (and some others) to 'int bytes', as they both refer to bytes.
This helps with code legibility.

Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Message-id: 20170609101808.13506-1-el13635@mail.ntua.gr
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-06-26 14:54:46 +02:00
Max Reitz f59adb3256 block: Add .bdrv_truncate() error messages
Add missing error messages for the block driver implementations of
.bdrv_truncate(); drop the generic one from block.c's bdrv_truncate().

Since one of these changes touches a mis-indented block in
block/file-posix.c, this patch fixes that coding style issue along the
way.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-5-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-28 16:02:03 +02:00
Max Reitz 4bff28b81a block: Add errp to BD.bdrv_truncate()
Add an Error parameter to the block drivers' bdrv_truncate() interface.
If a block driver does not set this in case of an error, the generic
bdrv_truncate() implementation will do so.

Where it is obvious, this patch also makes some block drivers set this
value.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-4-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-28 16:02:03 +02:00
Max Reitz ed3d2ec98a block: Add errp to b{lk,drv}_truncate()
For one thing, this allows us to drop the error message generation from
qemu-img.c and blockdev.c and instead have it unified in
bdrv_truncate().

Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-3-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
2017-04-28 16:02:02 +02:00
Kevin Wolf d7010dfb68 block: Request child permissions in filter drivers
All callers will have to request permissions for all of their child
nodes. Block drivers that act as simply filters can use the default
implementation of .bdrv_child_perm().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
2017-02-28 20:40:36 +01:00
Kevin Wolf 4e4bf5c42c block: Attach bs->file only during .bdrv_open()
The way that attaching bs->file worked was a bit unusual in that it was
the only child that would be attached to a node which is not opened yet.
Because of this, the block layer couldn't know yet which permissions the
driver would eventually need.

This patch moves the point where bs->file is attached to the beginning
of the individual .bdrv_open() implementations, so drivers already know
what they are going to do with the child. This is also more consistent
with how driver-specific children work.

For a moment, bdrv_open() gets its own BdrvChild to perform image
probing, but instead of directly assigning this BdrvChild to the BDS, it
becomes a temporary one and the node name is passed as an option to the
drivers, so that they can simply use bdrv_open_child() to create another
reference for their own use.

This duplicated child for (the not opened yet) bs is not the final
state, a follow-up patch will change the image probing code to use a
BlockBackend, which is completely independent of bs.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-24 16:09:23 +01:00
Kevin Wolf 52cdbc5869 block: Pass BdrvChild to bdrv_truncate()
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2017-02-24 16:09:23 +01:00
Eric Blake 2e6fc7eb1a block: Rename raw_bsd to raw-format.c
Given that we have raw-win32.c and raw-posix.c, my initial guess at
raw_bsd.c was that it was for dealing with raw files using code
specific to the BSD operating system (beyond what raw-posix could
do).  Not so - this name was chosen back in commit e1c66c6 to
distinguish that it was a BSD licensed file, in contrast to the
then-existing raw.c with an unclear and potentially unusable
license.  But since it has been more than three years since the
rewrite, it's time to pick a more useful name for this file to
avoid this type of confusion to future contributors that don't know
the backstory, as none of our other files are named solely by the
license they use.

In reality, this file deals with the raw format, which is useful
with any number of protocols, while raw-{win32,posix} deal with
the file protocol (and in turn, that protocol is not limited to
use with the raw format).  So rename raw_bsd to raw-format.c.  We
could have also used the shorter name raw.c, except that collides
with the earlier use of that filename for a different license,
and it's better to be safe than risk license pollution.

The next patch will also rename raw-win32.c and raw-posix.c to
further distinguish the difference in roles.

It doesn't hurt that this gets rid of an underscore in the filename,
thereby making tab-completion on 'ra<TAB>' easier (now I don't have
to type the shift key, which slows things down :)

Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2017-01-09 13:30:52 +01:00