This saves a little memory compared to the doubly-linked QTAILQ.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1467906798-5312-2-git-send-email-pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Comment tweaked to avoid long line]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Making each output visitor provide its own output collection
function was the only remaining reason for exposing visitor
sub-types to the rest of the code base. Add a polymorphic
visit_complete() function which is a no-op for input visitors,
and which populates an opaque pointer for output visitors. For
maximum type-safety, also add a parameter to the output visitor
constructors with a type-correct version of the output pointer,
and assert that the two uses match.
This approach was considered superior to either passing the
output parameter only during construction (action at a distance
during visit_free() feels awkward) or only during visit_complete()
(defeating type safety makes it easier to use incorrectly).
Most callers were function-local, and therefore a mechanical
conversion; the testsuite was a bit trickier, but the previous
cleanup patch minimized the churn here.
The visit_complete() function may be called at most once; doing
so lets us use transfer semantics rather than duplication or
ref-count semantics to get the just-built output back to the
caller, even though it means our behavior is not idempotent.
Generated code is simplified as follows for events:
|@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP
| QDict *qmp;
| Error *err = NULL;
| QMPEventFuncEmit emit;
|- QmpOutputVisitor *qov;
|+ QObject *obj;
| Visitor *v;
| q_obj_ACPI_DEVICE_OST_arg param = {
| info
|@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP
|
| qmp = qmp_event_build_dict("ACPI_DEVICE_OST");
|
|- qov = qmp_output_visitor_new();
|- v = qmp_output_get_visitor(qov);
|+ v = qmp_output_visitor_new(&obj);
|
| visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err);
| if (err) {
|@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP
| goto out;
| }
|
|- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov));
|+ visit_complete(v, &obj);
|+ qdict_put_obj(qmp, "data", obj);
| emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err);
and for commands:
| {
| Error *err = NULL;
|- QmpOutputVisitor *qov = qmp_output_visitor_new();
| Visitor *v;
|
|- v = qmp_output_get_visitor(qov);
|+ v = qmp_output_visitor_new(ret_out);
| visit_type_AddfdInfo(v, "unused", &ret_in, &err);
|- if (err) {
|- goto out;
|+ if (!err) {
|+ visit_complete(v, ret_out);
| }
|- *ret_out = qmp_output_get_qobject(qov);
|-
|-out:
| error_propagate(errp, err);
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have a polymorphic visit_free(), we no longer need
qmp_output_visitor_cleanup(); however, we still need to
expose the subtype for qmp_output_get_qobject().
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-10-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Making each visitor provide its own (awkwardly-named) FOO_cleanup()
is unusual, when we can instead have a polymorphic visit_free()
interface. Over the next few patches, we can use the polymorphic
functions to eliminate the need for a FOO_get_visitor() function
for accessing specific visitor functionality, once everything can
be accessed directly through the Visitor* interfaces.
The dealloc visitor is the first one converted to completely use
the new entry point, since qapi_dealloc_visitor_cleanup() was the
only reason that qapi_dealloc_get_visitor() existed, and only
generated and testsuite code was even using it. With the new
visit_free() entry point in place, we no longer need to expose
the QapiDeallocVisitor subtype through qapi_dealloc_visitor_new(),
and can get by with less generated code, with diffs that look like:
| void qapi_free_ACPIOSTInfo(ACPIOSTInfo *obj)
| {
|- QapiDeallocVisitor *qdv;
| Visitor *v;
|
| if (!obj) {
| return;
| }
|
|- qdv = qapi_dealloc_visitor_new();
|- v = qapi_dealloc_get_visitor(qdv);
|+ v = qapi_dealloc_visitor_new();
| visit_type_ACPIOSTInfo(v, NULL, &obj, NULL);
|- qapi_dealloc_visitor_cleanup(qdv);
|+ visit_free(v);
|}
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-5-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rather than making the dealloc visitor track of stack of pointers
remembered during visit_start_* in order to free them during
visit_end_*, it's a lot easier to just make all callers pass the
same pointer to visit_end_*. The generated code has access to the
same pointer, while all other users are doing virtual walks and
can pass NULL. The dealloc visitor is then greatly simplified.
All three visit_end_*() functions intentionally take a void**,
even though the visit_start_*() functions differ between void**,
GenericList**, and GenericAlternate**. This is done for several
reasons: when doing a virtual walk, passing NULL doesn't care
what the type is, but when doing a generated walk, we already
have to cast the caller's specific FOO* to call visit_start,
while using void** lets us use visit_end without a cast. Also,
an upcoming patch will add a clone visitor that wants to use
the same implementation for all three visit_end callbacks,
which is made easier if all three share the same signature.
For visitors with already track per-object state (the QMP visitors
via a stack, and the string visitors which do not allow nesting),
add an assertion that the caller is indeed passing the same
pointer to paired calls.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-4-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The semantics of the list visit are somewhat baroque, with the
following pseudocode when FooList is used:
start()
for (prev = head; cur = next(prev); prev = &cur) {
visit(&cur->value)
}
Note that these semantics (advance before visit) requires that
the first call to next() return the list head, while all other
calls return the next element of the list; that is, every visitor
implementation is required to track extra state to decide whether
to return the input as-is, or to advance. It also requires an
argument of 'GenericList **' to next(), solely because the first
iteration might need to modify the caller's GenericList head, so
that all other calls have to do a layer of dereferencing.
Thankfully, we only have two uses of list visits in the entire
code base: one in spapr_drc (which completely avoids
visit_next_list(), feeding in integers from a different source
than uint8List), and one in qapi-visit.py. That is, all other
list visitors are generated in qapi-visit.c, and share the same
paradigm based on a qapi FooList type, so we can refactor how
lists are laid out with minimal churn among clients.
We can greatly simplify things by hoisting the special case
into the start() routine, and flipping the order in the loop
to visit before advance:
start(head)
for (tail = *head; tail; tail = next(tail)) {
visit(&tail->value)
}
With the simpler semantics, visitors have less state to track,
the argument to next() is reduced to 'GenericList *', and it
also becomes obvious whether an input visitor is allocating a
FooList during visit_start_list() (rather than the old way of
not knowing if an allocation happened until the first
visit_next_list()). As a minor drawback, we now allocate in
two functions instead of one, and have to pass the size to
both functions (unless we were to tweak the input visitors to
cache the size to start_list for reuse during next_list, but
that defeats the goal of less visitor state).
The signature of visit_start_list() is chosen to match
visit_start_struct(), with the new parameters after 'name'.
The spapr_drc case is a virtual visit, done by passing NULL for
list, similarly to how NULL is passed to visit_start_struct()
when a qapi type is not used in those visits. It was easy to
provide these semantics for qmp-output and dealloc visitors,
and a bit harder for qmp-input (several prerequisite patches
refactored things to make this patch straightforward). But it
turned out that the string and opts visitors munge enough other
state during visit_next_list() to make it easier to just
document and require a GenericList visit for now; an assertion
will remind us to adjust things if we need the semantics in the
future.
Several pre-requisite cleanup patches made the reshuffling of
the various visitors easier; particularly the qmp input visitor.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-24-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
As mentioned in previous patches, we want to call visit_end_struct()
functions unconditionally, so that visitors can release resources
tied up since the matching visit_start_struct() without also having
to worry about error priority if more than one error occurs.
Even though error_propagate() can be safely used to ignore a second
error during cleanup caused by a first error, it is simpler if the
cleanup cannot set an error. So, split out the error checking
portion (basically, input visitors checking for unvisited keys) into
a new function visit_check_struct(), which can be safely skipped if
any earlier errors are encountered, and leave the cleanup portion
(which never fails, but must be called unconditionally if
visit_start_struct() succeeded) in visit_end_struct().
Generated code in qapi-visit.c has diffs resembling:
|@@ -59,10 +59,12 @@ void visit_type_ACPIOSTInfo(Visitor *v,
| goto out_obj;
| }
| visit_type_ACPIOSTInfo_members(v, obj, &err);
|- error_propagate(errp, err);
|- err = NULL;
|+ if (err) {
|+ goto out_obj;
|+ }
|+ visit_check_struct(v, &err);
| out_obj:
|- visit_end_struct(v, &err);
|+ visit_end_struct(v);
| out:
and in qapi-event.c:
@@ -47,7 +47,10 @@ void qapi_event_send_acpi_device_ost(ACP
| goto out;
| }
| visit_type_q_obj_ACPI_DEVICE_OST_arg_members(v, ¶m, &err);
|- visit_end_struct(v, err ? NULL : &err);
|+ if (!err) {
|+ visit_check_struct(v, &err);
|+ }
|+ visit_end_struct(v);
| if (err) {
| goto out;
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-20-git-send-email-eblake@redhat.com>
[Conflict with a doc fixup resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Tighten assertions in the QMP output visitor, so that:
- qmp_output_get_qobject() can only be called after pairing a
visit_end_* for every visit_start_* (rather than allowing it on
a partially built object)
- qmp_output_get_qobject() cannot be called unless at least one
visit_type_* or visit_start/visit_end pair has occurred since
creation/reset (the accidental return of NULL fixed by commit
ab8bf1d7 would have been much easier to diagnose)
- ensure that we are encountering the expected object or list
type, to provide protection against mismatched push(struct)/
pop(list) or push(list)/pop(struct), similar to the qmp-input
protection added in commit bdd8e6b5.
- ensure that except for the root, 'name' is non-null inside a
dict, and NULL inside a list (this may need changing later if
we add "name.0" support for better error messages for a list,
but for now it makes sure all users are at least consistent)
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Implement the new type_null() callback for the qmp input and
output visitors. While we don't yet have a use for this in QAPI
input (the generator will need some tweaks first), some
potential usages have already been discussed on the list.
Meanwhile, the output visitor could already output explicit null
via type_any, but this gives us finer control.
At any rate, it's easy to test that we can round-trip an explicit
null through manual use of visit_type_null() wrapped by a virtual
visit_start_struct() walk, even if we can't do the visit in a
QAPI type. Repurpose the test_visitor_out_empty test,
particularly since a future patch will tighten semantics to
forbid use of qmp_output_get_qobject() without at least one
intervening visit_type_*.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-16-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Right now, qmp-output-visitor happens to produce a QNull result
if nothing is actually visited between the creation of the visitor
and the request for the resulting QObject. A stronger protocol
would require that a QMP output visit MUST visit something. But
to still be able to produce a JSON 'null' output, we need a new
visitor function that states our intentions. Yes, we could say
that such a visit must go through visit_type_any(), but that
feels clunky.
So this patch introduces the new visit_type_null() interface and
its no-op interface in the dealloc visitor, and stubs in the
qmp visitors (the next patch will finish the implementation).
For the visitors that will not implement the callback, document
the situation. The code in qapi-visit-core unconditionally
dereferences the callback pointer, so that a segfault will inform
a developer if they need to implement the callback for their
choice of visitor.
Note that JSON has a primitive null type, with the single value
null; likewise with the QNull type for QObject; but for QAPI,
we just have the 'null' value without a null type. We may
eventually want to add more support in QAPI for null (most likely,
we'd use it via an alternate type that permits 'null' or an
object); but we'll create that usage when we need it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-15-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We have three classes of QAPI visitors: input, output, and dealloc.
Currently, all implementations of these visitors have one thing in
common based on their visitor type: the implementation used for the
visit_type_enum() callback. But since we plan to add more such
common behavior, in relation to documenting and further refining
the semantics, it makes more sense to have the visitor
implementations advertise which class they belong to, so the common
qapi-visit-core code can use that information in multiple places.
A later patch will better document the types of visitors directly
in visitor.h.
For this patch, knowing the class of a visitor implementation lets
us make input_type_enum() and output_type_enum() become static
functions, by replacing the callback function Visitor.type_enum()
with the simpler enum member Visitor.type. Share a common
assertion in qapi-visit-core as part of the refactoring.
Move comments in opts-visitor.c to match the refactored layout.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-2-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
By sticking the next pointer first, we don't need a union with
64-bit padding for smaller types. On 32-bit platforms, this
can reduce the size of uint8List from 16 bytes (or 12, depending
on whether 64-bit ints can tolerate 4-byte alignment) down to 8.
It has no effect on 64-bit platforms (where alignment still
dictates a 16-byte struct); but fewer anonymous unions is still
a win in my book.
It requires visit_next_list() to gain a size parameter, to know
what size element to allocate; comparable to the size parameter
of visit_start_struct().
I debated about going one step further, to allow for fewer casts,
by doing:
typedef GenericList GenericList;
struct GenericList {
GenericList *next;
};
struct FooList {
GenericList base;
Foo *value;
};
so that you convert to 'GenericList *' by '&foolist->base', and
back by 'container_of(generic, GenericList, base)' (as opposed to
the existing '(GenericList *)foolist' and '(FooList *)generic').
But doing that would require hoisting the declaration of
GenericList prior to inclusion of qapi-types.h, rather than its
current spot in visitor.h; it also makes iteration a bit more
verbose through 'foolist->base.next' instead of 'foolist->next'.
Note that for lists of objects, the 'value' payload is still
hidden behind a boxed pointer. Someday, it would be nice to do:
struct FooList {
FooList *next;
Foo value;
};
for one less level of malloc for each list element. This patch
is a step in that direction (now that 'next' is no longer at a
fixed non-zero offset within the struct, we can store more than
just a pointer's-worth of data as the value payload), but the
actual conversion would be a task for another series, as it will
touch a lot of code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1455778109-6278-10-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The previous commit documented an inconsistency in how we are
using the stack of qmp-output-visitor. Normally, pushing a
single top-level object puts the object on the stack twice:
once as the root, and once as the current container being
appended to; but popping that struct only pops once. However,
qmp_ouput_add() was trying to either set up the added object
as the new root (works if you parse two top-level scalars in a
row: the second replaces the first as the root) or as a member
of the current container (works as long as you have an open
container on the stack; but if you have popped the first
top-level container, it then resolves to the root and still
tries to add into that existing container).
Fix the stupidity by not tracking two separate things in the
stack. Drop the now-useless qmp_output_first() and
qmp_output_last() while at it.
Saved for a later patch: we still are rather sloppy in that
qmp_output_get_object() can be called in the middle of a parse,
rather than requiring that a visit is complete.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1454075341-13658-26-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit 6c2f9a15 ensured that we would not return NULL when the
caller used an output visitor but had nothing to visit. But
in doing so, it added a FIXME about a reference count leak
that could abort qemu in the (unlikely) case of SIZE_MAX such
visits (more plausible on 32-bit). (Although that commit
suggested we might fix it in time for 2.5, we ran out of time;
fortunately, it is unlikely enough to bite that it was not
worth worrying about during the 2.5 release.)
This fixes things by documenting the internal contracts, and
explaining why the internal function can return NULL and only
the public facing interface needs to worry about qnull(),
thus avoiding over-referencing the qnull_ global object.
It does not, however, fix the stupidity of the stack mixing
up two separate pieces of information; add a FIXME to explain
that issue, which will be fixed shortly in a future patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <1454075341-13658-25-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
No backend was setting an error when ending the visit of a list or
implicit struct, or when moving to the next list node. Make the
callers a bit easier to follow by making this a part of the contract,
and removing the errp argument - callers can then unconditionally end
an object as part of cleanup without having to think about whether a
second error is dominated by a first, because there is no second
error.
A later patch will then tackle the larger task of splitting
visit_end_struct(), which can indeed set an error.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1454075341-13658-24-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
visit_start_struct() and visit_type_enum() had a 'kind' argument
that was usually set to either the stringized version of the
corresponding qapi type name, or to NULL (although some clients
didn't even get that right). But nothing ever used the argument.
It's even hard to argue that it would be useful in a debugger,
as a stack backtrace also tells which type is being visited.
Therefore, drop the 'kind' argument as dead.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-22-git-send-email-eblake@redhat.com>
[Harmless rebase mistake cleaned up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
As explained in the previous patches, matching argument order of
'name, &value' to JSON's "name":value makes sense. However,
while the last two patches were easy with Coccinelle, I ended up
doing this one all by hand. Now all the visitor callbacks match
the main interface.
The compiler is able to enforce that all clients match the changed
interface in visitor-impl.h, even where two pointers are being
swapped, because only one of the two pointers is const (if that
were not the case, then C's looseness on treating 'char *' like
'void *' would have made review a bit harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-21-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Our qapi visitor contract supports multiple integer visitors,
but left the type_uint64 visitor as optional (falling back on
type_int64); which in turn can lead to awkward behavior with
numbers larger than INT64_MAX (the user has to be aware of
twos complement, and deal with negatives).
This patch does not address the disparity in handling large
values as negatives. It merely moves the fallback from uint64
to int64 from the visitor core to the visitors, where the issue
can actually be fixed, by implementing the missing type_uint64()
callbacks on top of the respective type_int64() callbacks, and
with a FIXME comment explaining why that's wrong.
With that done, we now have a type_uint64() callback in every
driver, so we can make it mandatory from the core. And although
the type_int64() callback can cover the entire valid range of
type_uint{8,16,32} on valid user input, using type_uint64() to
avoid mixed signedness makes more sense.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1454075341-13658-15-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The qapi builtin type 'int' is basically shorthand for the type
'int64'. In fact, since no visitor was providing the optional
type_int64() callback, visit_type_int64() was just always falling
back to type_int(), cementing the equivalence between the types.
However, some visitors are providing a type_uint64() callback.
For purposes of code consistency, it is nicer if all visitors
use the paired type_int64/type_uint64 names rather than the
mismatched type_int/type_uint64. So this patch just renames
the signed int callbacks in place, dropping the type_int()
callback as redundant, and a later patch will focus on the
unsigned int callbacks.
Add some FIXMEs to questionable reuse of errp in code touched
by the rename, while at it (the reuse works as long as the
callbacks don't modify value when setting an error, but it's not
a good example to set) - a later patch will then fix those.
No change in functionality here, although further cleanups are
in the pipeline.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1454075341-13658-14-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1454089805-5470-8-git-send-email-peter.maydell@linaro.org
It's first class, because unlike '**', it actually works, i.e. doesn't
require 'gen': false.
'**' will go away next.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Before commit 1d10b44, it crashed. Since then, it returns NULL, with
a FIXME comment. The FIXME is valid: code that assumes QObject *
can't be null exists. I'm not aware of a way to feed this problematic
return value to code that actually chokes on null in the current code,
but the next few commits will create one, failing "make check".
Commit 481b002 solved a very similar problem by introducing a special
null QObject. Using this special null QObject is clearly the right
way to resolve this FIXME, so do that, and update the test
accordingly.
However, the patch isn't quite right: it messes up the reference
counting. After about SIZE_MAX visits, the reference counter
overflows, failing the assertion in qnull_destroy_obj(). Because
that's many orders of magnitude more visits of nulls than we expect,
we take this patch despite its flaws, to get the QMP introspection
stuff in without further delay. We'll want to fix it for real before
the release.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-21-git-send-email-armbru@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
We require a C99 compiler, so let's use 'bool' instead of 'int'
when dealing with boolean values. There are few enough clients
to fix them all in one pass.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A NULL value is not added to visitor's stack, but there
is no check for that when the visitor tries to return
that value, leading to QEMU crash.
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Stack entries in QmpOutputVisitor are navigation links (weak references),
except the bottom (ie. least recently added) entry, which owns the root
QObject [1]. Make qmp_output_visitor_cleanup() drop the stack entries,
then release the QObject tree by the root.
Attempting to serialize an invalid enum inside a dictionary is an example
for triggering the double free.
[1] http://lists.nongnu.org/archive/html/qemu-devel/2012-03/msg03276.html
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We don't currently check for negative enum values in qmp_output_type_enum(),
this will very likely generate a segfault when triggered.
However, it _seems_ that no code in tree can trigger this today.
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Modify logic such that we never assign values to the list head argument
to progress through the list on subsequent iterations, instead rely only
on having our return value passed back in as an argument on the next
call. Also update QMP I/O visitors and test cases accordingly, and add a
missing test case for QmpOutputVisitor.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Type of Visiter class that serves as the inverse of the input visitor:
it takes a series of native C types and uses their values to construct a
corresponding QObject. The command marshaling/dispatcher functions will
use this to convert the output of QMP functions into a QObject that can
be sent over the wire.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Paolo Bonzini
Eric Blake
Peter Maydell
Markus Armbruster
Marcel Apfelbaum
Laszlo Ersek
Luiz Capitulino
Michael Roth
Anthony Liguori